TY - BOOK A1 - Knepper, Ludger T1 - Staplereinsatzkonzept Rohstofflagerplatz einer Papierfabrik Y1 - 2000 N1 - Bericht Lehrgebiet Produktionslogistik der Fachhochschule Aachen CY - FH Aachen ER - TY - BOOK A1 - Knepper, Ludger T1 - Konzeptentwicklung verkehrstechnische Organisation des Pfortenbereichs eines Industrieunternehmens Y1 - 2000 N1 - Bericht Lehrgebiet Produktionslogistik der Fachhochschule Aachen CY - FH Aachen ER - TY - BOOK A1 - Knepper, Ludger T1 - Entwicklung neuer Generalbebauungsplan für ein Industrieunternehmen Y1 - 2001 N1 - Bericht Lehrgebiet Produktionslogistik der Fachhochschule Aachen CY - FH Aachen ER - TY - BOOK A1 - Knepper, Ludger T1 - Konzeptentwicklung Distributionszentrum für Tissue-Papiere Y1 - 2003 N1 - Bericht Lehrgebiet Produktionslogistik der Fachhochschule Aachen CY - FH Aachen ER - TY - BOOK A1 - Knepper, Ludger T1 - Procurement Optimizer – Rechner- und internetgestütztes Tool zur Optimierung der Materialbeschaffung in der Produktion Y1 - 2003 N1 - Bericht Lehrgebiet Produktionslogistik der Fachhochschule Aachen CY - FH Aachen ER - TY - BOOK A1 - Knepper, Ludger T1 - Aufbau eines Benchmark-Systems für operative Unternehmensprozesse Y1 - 2004 N1 - Bericht Lehrgebiet Produktionslogistik der Fachhochschule Aachen CY - FH Aachen ER - TY - BOOK A1 - Knepper, Ludger T1 - Auslegung und Konstruktion von Hallentorantrieben Y1 - 2004 N1 - Bericht Lehrgebiet Produktionslogistik der Fachhochschule Aachen CY - FH Aachen ER - TY - BOOK A1 - Knepper, Ludger T1 - Das Rolltor : Bauwerköffnungs-Abschlüsse ; Aufbau, Konstruktion, Hinweise zur Berechnung / von Horst Günter Steuff ; unter Mitarb. von Ludger Knepper ; Frieder Thiele Y1 - 1992 SN - 3-8041-3165-4 PB - Werner CY - Düsseldorf ER - TY - JOUR A1 - Knepper, Ludger T1 - Der moderne Luftfrachtverkehr - leistungsfaehig durch seine bodengebundenen Umschlagssysteme Y1 - 1985 N1 - Konferenzeinzelbericht : Transmatik 85. Kongress Neue Technologien im Materialfluss und in der Foerdertechnik, Univ. Karlsruhe, 10.-12.5.1985 SP - 60 EP - 69 ER - TY - JOUR A1 - Knepper, Ludger T1 - Hochregallager fuer Luftfracht - 365 Tage pro Jahr in Betrieb JF - Foerdern und Heben. 35 (1985), H. 5 Y1 - 1985 SN - 0341-2636 SP - 363 EP - 366 ER - TY - JOUR A1 - Knepper, Ludger T1 - Integrierte Hochregallager als materialflusstechnische Knotenpunkte moderner Produktions- und Umschlaganlagen Y1 - 1984 N1 - Konferenz-Einzelbericht : Materialfluss - Logistik und Technik. Seminar f. Materialfluss, Univ. Karlsruhe, 1984 SP - 93 EP - 100 ER - TY - JOUR A1 - Knepper, Ludger T1 - Verstaerkte materialflusstechnische Integration von Hochregallagern in Produktions- und Umschlaganlagen Y1 - 1983 N1 - Konferenz-Einzelbericht : 4. Int. Logistik Kongress. Deutsche Ges. f. Logistik (DGfL), Dortmund, 7.-9.12.1983. Kongresshandbuch 1 SP - 219 EP - 224 ER - TY - JOUR A1 - Knepper, Ludger T1 - Im neuen Lufthansa-Frachtterminal: vom Hochregallager direkt ins Flugzeug JF - Foerdermittel Journal. Kennzifferzeitschrift fuer Materialfluss, Lager und Transport. 13 (1981), H. 7/8 Y1 - 1981 SN - 0013-5674 SP - 22 EP - 24 ER - TY - BOOK A1 - Knepper, Ludger T1 - Einsatz undAuslegung von Hochlagersystemen fuer Container, dargestellt am Beispiel einer Seehafenumschlaganlage Y1 - 1978 N1 - Dissertation CY - Aachen ER - TY - JOUR A1 - Knepper, Ludger T1 - Integrierte Hochregallager als materialflusstechnische Knotenpunkte moderner Produktions- und Umschlaganlagen JF - Deutsche Hebe- und Foerdertechnik. 30 (1984), H. 12 Y1 - 1984 SN - 0012-0278 SP - 88 EP - 93 ER - TY - JOUR A1 - Knepper, Ludger T1 - Simulation: Vom reinen Planungswerkzeug zum Betriebsführungs-Instrument JF - Foerdern und Heben. 46 (1996), H. 3 Y1 - 1996 SN - 0341-2636 SP - 158 EP - 160 ER - TY - JOUR A1 - Klocke, Martina A1 - Spur, G. T1 - Keramografische Untersuchungen an Edelkorundschleifscheiben / Spur, G. ; Klocke, M. JF - Jahrbuch Schleifen, Honen, Läppen und Polieren. 53. Ausgab (1985) Y1 - 1985 SN - 0172-245X SP - 255 EP - 267 ER - TY - JOUR A1 - Klocke, Martina A1 - Richert, Vera A1 - Sube, Maike T1 - Vier Jahre „Guter Studienstart im Ingenieurbereich“: Entwicklung und Perspektiven des „Nullten Semesters“ in Aachen JF - Zeitschrift für Beratung und Studium N2 - Bereits 2015 wurde in der Zeitschrift „Qualität in der Wissenschaft“ (QiW) über das Kooperationsprojekt „Guter Studienstart im Ingenieurbereich“, das Orientierungssemester von RWTH und FH Aachen, berichtet. In diesem Artikel legen wir den Schwerpunkt auf die Entwicklung des Projekts in den Jahren 2015 bis 2018 und geben eine Rückschau sowie einen Ausblick auf die Entwicklungsperspektiven nach dem offiziellen Projektende. Y1 - 2018 SN - 1860-3068 VL - 13 IS - 1 SP - 17 EP - 22 PB - Universitätsverlag Webler CY - Bielefeld ER - TY - JOUR A1 - Klocke, Martina A1 - Lenk, Antje T1 - Innovationstransfer auf der Basis von Akzeptanz und Zusammenarbeit / Lenk, Antje ; Klocke, Martina JF - Berufsbildung in Wissenschaft und Praxis. BWP. 22 (1993), H. 5 Y1 - 1993 SN - 0341-4515 SP - 43 EP - 45 ER - TY - JOUR A1 - Klocke, Martina A1 - Lenk, A. T1 - Hilfe zur Selbsthilfe JF - Lernfeld Betrieb (1993) Y1 - 1993 SN - 0930-4460 SP - 26 EP - 27 ER - TY - CHAP A1 - Klocke, Martina A1 - Katz, Christiane T1 - Heterogenität von MINT-Studierenden als Herausforderung T2 - Tagungsband zum 3. Symposium zur Hochschullehre in den MINT-Fächern Y1 - 2017 SP - 31 EP - 36 PB - Technische Hochschule Nürnberg Georg Simon Ohm CY - Nürnberg ER - TY - JOUR A1 - Klocke, Martina A1 - Jochimsen, P. T1 - Fachhochschulen sind leistungsorientierte Partner der Wirtschaft / Jochimsen, P. ; Klocke, M. JF - Zwischen Ostsee und Nordsee : Wirtschaft im Bezirk der IHK zu Kiel / hrsg. in Zu-sammenarbeit mit der Industrie- und Handelskammer zu Kiel. Red.: Wolf-Rüdiger Janzen. 3., völlig neue Ausg. Y1 - 1996 SN - 388363140X SP - 66 EP - 69 PB - Verl. Kommunikation und Wirtschaft CY - Oldenburg ER - TY - BOOK A1 - Klocke, Martina T1 - Einfluß des Gefüges von Edelkorundschleifscheiben auf ihre Werkstoffkennwerte und das Schleifverhalten Y1 - 1986 SN - 3446148299 N1 - Produktionstechnik Berlin ; 52 ; Nebent.: Gefüge und Schleifverhalten von Edelkorundschleifscheiben. Techn. Univ., Diss. , Berlin, 1986. PB - Hanser CY - München ER - TY - JOUR A1 - Klocke, Martina T1 - Entwicklung der Feinbearbeitung am Institut für Werkzeugmaschinen und Fertigungstechnik der Technischen Universität Berlin / Klocke, M.; Klocke, F. ; Stark, C. JF - Zeitschrift für wirtschaftliche Fertigung: ZwF. 83 (1988), H. 10 Y1 - 1988 SN - 0044-3743 SP - 521 EP - 529 ER - TY - BOOK A1 - Klocke, Martina T1 - CIM, Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben : [Bericht über den EUROTECNET-Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke] Y1 - 1992 N1 - Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" <1991, Elmshorn> PB - EUROTECNET CY - Brüssel ER - TY - JOUR A1 - Klocke, Martina T1 - Die Situation von Ingenieurinnen in Europa - ein Ländervergleich JF - Neue Impulse (1995) Y1 - 1995 SN - 0943-4240 SP - 7 EP - 16 ER - TY - JOUR A1 - Klocke, Martina T1 - Angebotsstrukturen und Kosten bzw. Wirtschaftlichkeit von Bildungsangeboten JF - Entwicklung und Umsetzung regionaler Qualifizierungsstrategien : Reader zum Workshop am 21.02.1994 in Berlin / Hrsg.: Bundesinstitut für Berufsbildung. Christel Alt ... (Hrsg.) Y1 - 1995 SN - 3-7639-0531-6 N1 - Bundesinstitut für Berufsbildung Tagungen und Expertengespräche zur beruflichen Bildung ; 24 SP - 37 EP - 40 PB - Bertelsmann CY - Bielefeld ER - TY - JOUR A1 - Klocke, Martina T1 - Lernfabrik - externer Ort für Personalentwicklung JF - Entwicklung und Umsetzung regionaler Qualifizierungsstrategien : Reader zum Workshop am 21.02.1994 in Berlin / Hrsg.: Bundesinstitut für Berufsbildung. Christel Alt ... (Hrsg.) Y1 - 1995 SN - 3-7639-0531-6 N1 - Bundesinstitut für Berufsbildung Tagungen und Expertengespräche zur beruflichen Bildung ; 24 ; in der Vorlage fälschlicherweise: Marina Klocke SP - 89 EP - 94 PB - Bertelsmann CY - Bielefeld ER - TY - JOUR A1 - Klocke, Martina T1 - Study Units in the CIM-Oriented Study Factory JF - Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner Y1 - 1995 SN - 3-540-19971-3 SP - 38 EP - 51 PB - Springer CY - Berlin [u.a.] ER - TY - JOUR A1 - Klocke, Martina T1 - Kiel – eine Fachhochschule macht Stadtteilarbeit Y1 - 2000 N1 - http://www.zukunft-der-regionen.de (aufgerufen am 17.07.2006) CY - Kiel ER - TY - JOUR A1 - Klocke, Martina T1 - Die Situation von Ingenieurinnen in Europa - ein Ländervergleich JF - Berufsziel: Ingenieurin : Aufbruch in die/der Technik / hrsg. von Renate Kosuch Y1 - 1996 SN - 3-89271-645-5 SP - 26 EP - 38 PB - Deutscher Studien-Verl. CY - Weinheim ER - TY - JOUR A1 - Klocke, Martina T1 - Lernfabrik - externer Ort für Personalentwicklung? JF - Lean-Management : Potentiale und Erfolge ; mit den Referaten zur 19. Deutschen Industrial-Engeneering-Fachtagung am 2. und 3. Dezember 1993 und weiteren Beiträgen zum angewandten Industrial engineering / REFA-IE Y1 - 1993 N1 - Deutsche Industrial-Engineering-Fachtagung, <19, 1993, Darmstadt> Deutsches IE-Jahrbuch 1993 SP - 6/1 EP - 6/15 CY - Darmstadt ER - TY - JOUR A1 - Klocke, Martina T1 - Entwicklung von modularen Lerneinheiten in der CIM-orientierten Lernfabrik JF - CIM, Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben : [Bericht über den EUROTECNET-Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke] Y1 - 1992 N1 - Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" <1991, Elmshorn> SP - 49 EP - 60 PB - EUROTECNET CY - Brüssel ER - TY - JOUR A1 - Klocke, Martina T1 - Neue Technologien - eine Herausforderung für Klein- und Mittelbetriebe JF - CIM, Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben : [Bericht über den EUROTECNET-Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke] Y1 - 1992 N1 - Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" <1991, Elmshorn> SP - 6 EP - 8 PB - EUROTECNET CY - Brüssel ER - TY - BOOK A1 - Klocke, Martina T1 - Von der Dampfmaschine zur Brennstoffzelle : 100 Jahre Ingenieurausbildung in Kiel / [Hrsg. Fachhochschule Kiel. Red. Martina Klocke] Y1 - 2003 PB - Fachhochschule CY - Kiel ER - TY - JOUR A1 - Klocke, Martina T1 - CNC-Technik holt auf bei der Feinbearbeitung / Voelmy, M. JF - VDI-Nachrichten (1981) Y1 - 1981 N1 - vom 18.12.1981. Voelmy, Martina = Geburtsname von Frau Prof. Dr.-Ing. Martina Klocke ER - TY - JOUR A1 - Klocke, Martina T1 - Ingenieurinnen dringend gesucht JF - Von der Dampfmaschine zur Brennstoffzelle : 100 Jahre Ingenieurausbildung in Kiel / [Hrsg. Fachhochschule Kiel. Red. Martina Klocke] Y1 - 2003 SP - 52 EP - 55 PB - Fachhochschule CY - Kiel ER - TY - JOUR A1 - Klocke, Martina T1 - Wärmebehandlungsanlagen / Voelmy, M. JF - Zeitschrift für wirtschaftliche Fertigung : ZwF. 78 (1983), H. 6 Y1 - 1983 SN - 0044-3743 N1 - Voelmy, Martina = Geburtsname von Frau Prof. Dr.-Ing. Martina Klocke. SP - 293 EP - 300 ER - TY - CHAP A1 - Klocke, Martina T1 - Projektmodul im Bachelorstudiengang Maschinenbau bzw. Mechatronik T2 - Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Prüfen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen Y1 - 2011 SP - 1 EP - 25 ER - TY - CHAP A1 - Klocke, Martina T1 - Schulter an Schulter – Zusammenarbeit in einem differenzierten Hochschulsystem T2 - Lehre und Lehrentwicklung an Fachhochschulen – Festschrift für Prof. Dr. med. W. Huhn Y1 - 2018 SN - 978-3-8309-3782-1 SP - 75 EP - 80 PB - Waxmann CY - Münster ER - TY - CHAP A1 - Kleine, Harald A1 - Kallweit, Stephan A1 - Michaux, Frank A1 - Havermann, Marc A1 - Olivier, Herbert T1 - PIV Measurement of Shock Wave Diffraction T2 - 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon Y1 - 2016 SP - 1 EP - 14 ER - TY - JOUR A1 - Kilic, S. A. A1 - Raatschen, Hans-Jürgen A1 - Körfgen, B. A1 - Apaydin, N. M. A1 - Astaneh-Asl, A. T1 - FE Model of the Fatih Sultan Mehmet Suspension Bridge Using Thin Shell Finite Elements JF - Arabian Journal for Science and Engineering N2 - This paper presents the results of an eigenvalue analysis of the Fatih Sultan Mehmet Bridge. A high-resolution finite element model was created directly from the available design documents. All physical properties of the structural components were included in detail, so no calibration to the measured data was necessary. The deck and towers were modeled with shell elements. A nonlinear static analysis was performed before the eigenvalue calculation. The calculated natural frequencies and corresponding mode shapes showed good agreement with the available measured ambient vibration data. The calculation of the effective modal mass showed that nine modes had single contributions higher than 5 % of the total mass. They were in a frequency range up to 1.2 Hz. The comparison of the results for the torsional modes especially demonstrated the advantage of using thin shell finite elements over the beam modeling approach. KW - Suspension bridge KW - 3D nonlinear finite element model KW - Thin shell finite elements KW - Natural frequency KW - Effective modal mass Y1 - 2017 U6 - http://dx.doi.org/10.1007/s13369-016-2316-y SN - 2191-4281 VL - 42 IS - 3 SP - 1103 EP - 1116 PB - Springer Nature ER - TY - CHAP A1 - Kilic, S. A. A1 - Raatschen, Hans-Jürgen A1 - Astaneh-Asl, A. A1 - Apaydin, N. M. T1 - Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge T2 - Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges Y1 - 2015 SN - 9781138027572 SP - 1169 EP - 1173 PB - CRC Press CY - Leiden ER - TY - JOUR A1 - Kessler, Julia A1 - Balc, Nicolae A1 - Gebhardt, Andreas A1 - Abbas, Karim T1 - Basic Research on Lattice Structures Focused on the Tensile Strength JF - Applied Mechanics and Materials Y1 - 2015 U6 - http://dx.doi.org/10.4028/www.scientific.net/AMM.808.193 SN - 1662-7482 N1 - MTeM ; October 14-16, 2015, Cluj-Napoca, Romania VL - Vol. 808 SP - 193 EP - 198 PB - Trans Tech Publications CY - Bäch ER - TY - CHAP A1 - Kessler, Julia A1 - Balc, Nicolae A1 - Gebhardt, Andreas A1 - Abbas, Karim T1 - Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings T2 - The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16 Y1 - 2017 U6 - http://dx.doi.org/10.1051/matecconf/20179403008 N1 - MATEC Web Conf. Vol 94, 2017, 03008 MATEC Web of Conferences 94, 03008 (2017) ET - Vol. 94 ER - TY - CHAP A1 - Kessler, Julia A1 - Balc, Nicolae A1 - Gebhardt, Andreas T1 - Basic research on lattice structures focused on the strut shape and welding beads T2 - Physics Procedia Y1 - 2016 U6 - http://dx.doi.org/10.1016/j.phpro.2016.08.086 SN - 1875-3884 N1 - Laser Assisted Net Shape Engineering 9th International Conference on Photonic Technologies Proceedings of the LANE 2016 VL - Vol. 83 SP - 833 EP - 838 ER - TY - JOUR A1 - Kasch, Susanne A1 - Schmidt, Thomas A1 - Jahn, Simon A1 - Eichler, Fabian A1 - Thurn, Laura A1 - Bremen, Sebastian T1 - Lösungsansätze und Verfahrenskonzepte zum Laserstrahlschmelzen von Glas JF - Schweissen und Schneiden Y1 - 2021 SN - 0036-7184 VL - 73 IS - Heft 1-2 SP - 32 EP - 39 PB - DVS Verlag CY - Düsseldorf ER - TY - CHAP A1 - Kasch, Susanne A1 - Schmidt, Thomas A1 - Eichler, Fabian A1 - Thurn, Laura A1 - Jahn, Simon A1 - Bremen, Sebastian T1 - Solution approaches and process concepts for powder bed-based melting of glass T2 - Industrializing Additive Manufacturing. Proceedings of AMPA2020 N2 - In the study, the process chain of additive manufacturing by means of powder bed fusion will be presented based on the material glass. In order to reliably process components additively, new concepts with different solutions were developed and investigated. Compared to established metallic materials, the properties of glass materials differ significantly. Therefore, the process control was adapted to the material glass in the investigations. With extensive parameter studies based on various glass powders such as borosilicate glass and quartz glass, scientifically proven results on powder bed fusion of glass are presented. Based on the determination of the particle properties with different methods, extensive investigations are made regarding the melting behavior of glass by means of laser beams. Furthermore, the experimental setup was steadily expanded. In addition to the integration of coaxial temperature measurement and regulation, preheating of the building platform is of major importance. This offers the possibility to perform 3D printing at the transformation temperatures of the glass materials. To improve the component’s properties, the influence of a subsequent heat treatment was also investigated. The experience gained was incorporated into a new experimental system, which allows a much better exploration of the 3D printing of glass. Currently, studies are being conducted to improve surface texture, building accuracy, and geometrical capabilities using three-dimensional specimen. The contribution shows the development of research in the field of 3D printing of glass, gives an insight into the machine and process engineering as well as an outlook on the possibilities and applications. KW - Glass powder KW - Laser processing KW - Additive manufacturing KW - Melting KW - L-PBF Y1 - 2020 SN - 978-3-030-54333-4 (Print) SN - 978-3-030-54334-1 (Online) U6 - http://dx.doi.org/10.1007/978-3-030-54334-1_7 N1 - International Conference on Additive Manufacturing in Products and Applications. 01.-03. September 2020. Zurich, Switzerland SP - 82 EP - 95 PB - Springer CY - Cham ER - TY - JOUR A1 - Kampker, Achim A1 - Schleser, Markus A1 - Triebs, Johannes A1 - Berg, Alexander-Karl A1 - Hansen, Jan Ole A1 - Fiedler, Falko T1 - Bauteilintegrierte Vorrichtungsfunktionen im Karosseriebau : Aktuelle Ergebnisse im Forschungsprojekt ProeK JF - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Das Forschungsprojekt Produktionseffizienz in der Kleinserie (ProeK) erarbeitet kostengünstige und effiziente Lösungsansätze für Prozessketten im Zukunftsfeld der Elektromobilität. Das Teilprojekt Karosserie setzt diese Zielsetzung durch innovative und praxisorientierte Produkt- und Prozesskonzepte mit neuartigen bauteilintegrierten Vorrichtungsfunktionen (BiV) um. Im Teilprojekt Außenhaut sollen Toleranzen adaptiv durch Anpassungen der Prozessparameter sowie Bauteilmanipulation kompensiert werden. Y1 - 2018 U6 - http://dx.doi.org/10.3139/104.112012 SN - 0947-0085 VL - 113 IS - 11 SP - 767 EP - 770 PB - De Gruyter CY - Berlin ER - TY - JOUR A1 - Kallweit, Stephan A1 - Willert, Chris A1 - Dues, Michael A1 - Müller, Ulrich T1 - PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; Müller, Ulrich ; Lederer, Thomas Y1 - 2008 N1 - 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2008-07-07 - 2008-07-10, Lisbon (Portugal) SP - 6 S. ER - TY - JOUR A1 - Kallweit, Stephan A1 - Vanlanduit, S. A1 - Vanherzeele, J. A1 - Brouns, M. T1 - Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P. JF - PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007 Y1 - 2007 N1 - PIV, Internional Symposium on Particle Image Velocimetry, 7 ; Datei: Vanlanduit.pdf SP - 1 EP - 14 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Uchiyama, R. A1 - Siekmann, H. T1 - Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H. JF - International Journal of Rotating Machinery. 4 (1998), H. 1 Y1 - 1998 SN - 1542-3034 SP - 49 EP - 59 ER - TY - CHAP A1 - Kallweit, Stephan A1 - Tedjasukmana, O. A1 - Korculanin, O. ED - Kähler, Christian J. T1 - Adaption und Implementierung eines 3D-PIV Algorithmus auf massiv paralleler Hardware T2 - Lasermethoden in der Strömungsmesstechnik : 21. Fachtagung, 3. - 5. September 2013, München Y1 - 2013 SN - 978-3-9805613-9-6 N1 - Fachtagung Lasermethoden in der Strömungsmesstechnik <13, 2013, München> PB - GALA CY - Karlsruhe ER - TY - JOUR A1 - Kallweit, Stephan A1 - Schimpf, Axel T1 - Photogrammetric Particle Image Velocimetry / Schimpf, Axel ; Kallweit, Stephan JF - Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ... Y1 - 2003 SN - 3-540-21423-2 SP - 295 PB - Springer CY - Berlin ER - TY - JOUR A1 - Kallweit, Stephan A1 - Korculanin, O. A1 - Fröhlig, F. A1 - Gabi, M. A1 - Mattern, P. T1 - Photogrammetrische Rekonstruktion von Partikelpositionen mittels Rückprojektion für 3D-PIV JF - Lasermethoden in der Strömungsmesstechnik : 19. Fachtagung, 6. - 8. September 2011, Ilmenau ; [Tagungsband enthält ... Beiträge, die anlässlich der 19. Fachtagaung "Lasermethoden in der Strömungsmesstechnik" ... vorgetragen und diskutiert wurden] / veranst. von der Deutschen Gesellschaft für Laser-Anemometrie GALA e.V. Hrsg. A. Thess... Y1 - 2011 SN - 978-3-9805613-7-2 N1 - Fachtagung Lasermethoden in der Strömungsmesstechnik <19, 2011, Ilmenau> ; Deutsche Gesellschaft für Laser-Anemometrie SP - 28/1 EP - 28/6 PB - Dt. Ges. für Laser-AnemometrieGALA e. V. CY - Karlsruhe ER - TY - JOUR A1 - Kallweit, Stephan A1 - Kisife, F. A1 - Utzenrad, M. A1 - Weber, J. T1 - Hispeed Scanning Stereo PIV hinter einer künstlichen Herzklappe / Kallweit, S. ; Kisife, F. ; Utzenrad, M. ; Weber, J. JF - Lasermethoden in der Strömungsmesstechnik : 16. Fachtagung, 9. - 11. September 2008, Karlsruhe / veranst. von der Deutschen Gesellschaft für Laser-Anemometrie GALA e.V. Hrsg.: B. Ruck Y1 - 2008 SN - 978-3-9805613-4-1 N1 - Fachtagung Lasermethoden in der Strömungsmesstechnik ; (16, 2008, Karlsruhe) ; Deutsche Gesellschaft für Laser-Anemometrie SP - 29 PB - GALA e.V. CY - Karlsruhe ER - TY - JOUR A1 - Kallweit, Stephan A1 - Kaminsky, Radoslav A1 - Rossi, Massimiliano A1 - Morbiducci, Umberto T1 - PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo JF - Particle Image Velocimetry - New Developments and Recent Applications Y1 - 2008 SN - 978-3-540-73528-1 N1 - Topics in Applied Physics SP - 55 EP - 72 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Kaminsky, R. A1 - Rossi, M. A1 - Scalise, L. T1 - PIV Measurements with high temporal Resolution behind Artificial Heart Valves / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P. JF - Proceedings of the 6th International Symposium on Particle Image Velocimetry Y1 - 2005 N1 - link zum abstract PB - Caltech CY - Pasadena, CA ER - TY - JOUR A1 - Kallweit, Stephan A1 - Kaminsky, R. A1 - Rossi, M. A1 - Morbiducci, U. T1 - Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M. JF - The International Journal of Artificial Organs. 28 (2005), H. 9 Y1 - 2005 SN - 1724-6040 N1 - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy SP - 946 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Kaminsky, R. A1 - Rossi, M. A1 - Morbiducci, U. T1 - 2D PIV Study of the flow downstream : Two prototypes of a ney monoleaflet artificial aortic heart valve prosthesis / Kaminsky, R. ; Kramm, K. ; Weber, H. J. ; Simons, A. P. ; Kallweit, S. ; Verdonck, P. R. JF - The International Journal of Artificial Organs. 28 (2005), H. 9 Y1 - 2005 SN - 1724-6040 N1 - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy SP - 921 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Kaminsky, R. A1 - Rossi, M. A1 - Morbiducci, U. T1 - 3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M. JF - The International Journal of Artificial Organs. 28 (2005), H. 9 Y1 - 2005 SN - 1724-6040 N1 - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy SP - 868 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Kaminsky, R. A1 - Canneyt, C. van A1 - Eloot, S. T1 - High-Speed und Stereo-PIV in einem künstlichen Blutgefäß / Kallweit, S. ; Kaminsky, R. ; Canneyt, C. van ; Eloot, S. JF - Lasermethoden in der Strömungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder .... Y1 - 2007 SN - 978-3-86009-007-7 N1 - Deutsche Gesellschaft für Laser-Anemometrie ; Fachtagung Lasermethoden in der Strömungsmesstechnik <15, 2007, Rostock> SP - 48 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Helbing, M. A1 - Orglmeister, R. A1 - Siekmann, H. E. T1 - Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J. JF - FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Labège / CERT/ONERA. General chairman Patrick Hebrard Y1 - 1994 SP - 87 EP - 94 CY - Toulouse ER - TY - CHAP A1 - Kallweit, Stephan A1 - Gottschalk, Michael A1 - Walenta, Robert T1 - ROS based safety concept for collaborative robots in industrial applications T2 - Advances in robot design and intelligent control : proceedings of the 24th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD). (Advances in intelligent systems and computing ; 371) N2 - The production and assembly of customized products increases the demand for flexible automation systems. One approach is to remove the safety fences that separate human and industrial robot to combine their skills. This collaboration possesses a certain risk for the human co-worker, leading to numerous safety concepts to protect him. The human needs to be monitored and tracked by a safety system using different sensors. The proposed system consists of a RGBD camera for surveillance of the common working area, an array of optical distance sensors to compensate shadowing effects of the RGBD camera and a laser range finder to detect the co-worker when approaching the work cell. The software for collision detection, path planning, robot control and predicting the behaviour of the co-worker is based on the Robot Operating System (ROS). A first prototype of the work cell shows that with advanced algorithms from the field of mobile robotics a very flexible safety concept can be realized: the robot not simply stops its movement when detecting a collision, but plans and executes an alternative path around the obstacle. KW - Collaborative robot KW - Human-Robot interaction KW - Safety concept KW - Workspace monitoring KW - Path planning Y1 - 2016 SN - 978-3-319-21289-0 (Print) ; 978-3-319-21290-6 (E-Book) U6 - http://dx.doi.org/10.1007/978-3-319-21290-6_3 SP - 27 EP - 35 PB - Springer CY - Cham ER - TY - JOUR A1 - Kallweit, Stephan A1 - Ebinger, G. A1 - Dues, M. A1 - Siekmann, H. T1 - Anwendung des Laserlichtschnitt-Verfahrens zur qualitativen Untersuchung der Durchströmung von Kreiselpumpen / Ebinger, G. ; Kallweit, S. ; Dues, M. ; Siekmann, H. JF - Lasermethoden in der Strömungsmesstechnik, 2. Fachtagung der Deutschen Gesellschaft für Laser-Anemometrie (GALA), PTB Braunschweig, DE, 14.-16. Sep, 1993 Y1 - 1993 SN - 3-86111-595-6 N1 - Lasermethoden in der Strömungsmesstechnik, Fachtagung, 2 SP - 37.1 EP - 37.4 PB - Shaker CY - Aachen ER - TY - JOUR A1 - Kallweit, Stephan A1 - Dues, Michael A1 - Radke, Michael T1 - Möglichkeiten und Grenzen laseroptischer Verfahren zur Untersuchung hydraulischer Strömungsmaschinen / Dues, Michael ; Kallweit, Stephan ; Radke, Michael JF - Forschung im Ingenieurwesen. 60 (1994), H. 11-12 Y1 - 1994 SN - 0015-7899 SP - 332 EP - 336 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Dues, Michael A1 - Müller, Ulli A1 - Lederer, Thomas T1 - Einsatz der Particle Image Velocimetry zur Untersuchung von Rohrströmungen / Kallweit, Stephan ; Dues, Michael ; Müller, Ulli ; Lederer, Thomas ; Schroll, Michael ; Willert, Christian JF - Lasermethoden in der Strömungsmesstechnik: 15. Fachtagung 2007 Rostock / Hrsg.: Alfred Leder .... Y1 - 2007 SN - 978-3-86009-007-7 N1 - Deutsche Gesellschaft für Laser-Anemometrie ; Fachtagung Lasermethoden in der Strömungsmesstechnik <15, 2007, Rostock> SP - 35 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Dues, M. W. A1 - Siekmann, H. E. T1 - Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps / Dues, M. W. ; Kallweit, S. D. ; Siekmann, H. E. JF - Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B. Y1 - 1994 N1 - International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 5, 1994, Kaanapali, Hawaii SP - 98 EP - 112 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Dues, M. A1 - Siekmann, H. T1 - Particle-Image-Velocimetry (PIV) in rotierenden Maschinen / Dues, M. ; Kallweit, S. ; Siekmann, H. JF - Lasermethoden in der Strömungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft für Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994 Y1 - 1994 SN - 3-8265-0162-4 N1 - Lasermethoden in der Strömungsmesstechnik, Fachtagung, 3 SP - 19.1 EP - 19-5 PB - Shaker CY - Aachen ER - TY - JOUR A1 - Kallweit, Stephan A1 - Abromeit, W. A1 - Dues, M. A1 - Siekmann, H. T1 - Anwendung der LDA zur Untersuchung der instationären Strömung im Nachleitrad einer axialen Kreiselpumpenstufe / Abromeit, W. ; Dues, M. ; Siekmann, H. ; Kallweit, S. JF - Lasermethoden in der Strömungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft für Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994 Y1 - 1994 SN - 3-8265-0162-4 N1 - Lasermethoden in der Strömungsmesstechnik, Fachtagung, 3 SP - 27.1 EP - 27.6 PB - Shaker CY - Aachen ER - TY - BOOK A1 - Kallweit, Stephan T1 - Untersuchungen zur Erstellung wissensbasierter Fehlerdiagnosesysteme für Kreiselpumpen Y1 - 1994 N1 - Berlin, Techn. Univ., Diss., 1995 ER - TY - JOUR A1 - Hötter, Jan-Steffen A1 - Fateri, Miranda A1 - Gebhardt, Andreas T1 - Prozessoptimierung des SLM-Prozesses mit hoch-reflektiven und thermisch sehr gut leitenden Materialien durch systematische Parameterfindung und begleitende Simulationen am Beispiel von Silber JF - RTejournal - Forum für Rapid Technologie N2 - Additive Manufacturing durch Aufschmelzen von Metallpulvern hat sich auf breiter Front als Herstellverfahren, auch für Endprodukte, etabliert. Besonders für die Variante des Selective Laser Melting (SLM) sind Anwendungen in der Zahntechnik bereits weit verbreitet und der Einsatz in sensitiven Branchen wie der Luftfahrt ist in greifbare Nähe gerückt. Deshalb werden auch vermehrt Anstrengungen unternommen, um bisher nicht verarbeitete Materialien zu qualifizieren. Dies sind vorzugsweise Nicht-Eisen- und Edelmetalle, die sowohl eine sehr hohe Reflektivität als auch eine sehr gute Wärmeleitfähigkeit aufweisen – beides Eigenschaften, die die Beherrschung des Laser-Schmelzprozesses erschweren und nur kleine Prozessfenster zulassen. Die Arbeitsgruppe SLM des Lehr- und Forschungsgebietes Hochleistungsverfahren der Fertigungstechnik hat sich unter der Randbedingung einer kleinen und mit geringer Laserleistung ausgestatteten SLM Maschine der Aufgabe gewidmet und am Beispiel von Silber die Parameterfelder für Einzelspuren und wenig komplexe Geometrien systematisch untersucht. Die Arbeiten wurden von FEM Simulationen begleitet und durch metallographische Untersuchungen verifiziert. Die Ergebnisse bilden die Grundlage zur schnellen Parameterfindung bei komplexen Geometrien und bei Veränderungen der Zusammensetzung, wie sie bei zukünftigen Legierungen zu erwarten sind. Die Ergebnisse werden exemplarisch auf unterschiedliche Geometrien angewandt und entsprechende Bauteile gezeigt. N2 - Additive manufacturing by melting of metal powders is a method that has been established even for the manufacturing of final products. In particular, Selective Laser Melting (SLM) is currently applied for prosthetic dentistry. In the near future, this technology will access sensitive industries like aerospace engineering. This leads to the need to process new materials. Therefore, especially non-ferrous metals and noble metals must be determined and qualified. These materials have in common a very high reflectivity and an excellent thermal conductivity. In general, these two properties counteract the control of the melt pool and contribute to very narrow process windows. The “SLM” research team of the Aachen University of Applied Science, AcUAS (FH Aachen) systematically investigated process parameter fields for silver. The work focused on a small SLM desktop machine with comparably low laser power. The results are verified using FEA and metallographic inspections and will support future set-ups for complex geometries. Furthermore, the obtained parameter fields are applied to make different geometric objects and to manufactured parts, which are presented. KW - SLM KW - Selektives Laser Schmelzen KW - Silber Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-2-33639 SN - 1614-0923 VL - 9 IS - 1 SP - 1 EP - 14 PB - Fachhoschule Aachen CY - Aachen ER - TY - JOUR A1 - Hötter, Jan-Steffen A1 - Fateri, Miranda A1 - Gebhardt, Andreas T1 - Selective laser melting of metals: desktop machines open up new chances even for small companies JF - Advanced materials research N2 - Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material. Y1 - 2012 U6 - http://dx.doi.org/10.4028/www.scientific.net/AMR.622-623.461 SN - 1662-8985 (E-Journal); 1022-6680 (Print) VL - 622-623 SP - 461 EP - 465 PB - Trans Tech Publ. CY - Baech ER - TY - JOUR A1 - Huber, M. A1 - Streblow, R. A1 - Müller, D. A1 - Lange, S. A1 - Joneleit, R. A1 - Sefker, T. A1 - Rau, Sebastian A1 - Wollert, Jörg T1 - Funksignalübertragung in Luftleitungen JF - HLH : Lüftung, Klima, Heizung, Sanitär, Gebäudetechnik Y1 - 2014 SN - 1436-5103 VL - Bd. 65 IS - H. 7/8 SP - 36 EP - 40 ER - TY - CHAP A1 - Huber, Frédéric A1 - Bleck, Wolfgang A1 - Scheik, Sven A1 - Schleser, Markus A1 - Reisgen, Uwe T1 - Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test T2 - Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings Y1 - 2011 SN - 978-88-85298-82-8 SP - Paper No. 43 PB - Associazione Italiana di Metallurgia CY - Mailand ER - TY - CHAP A1 - Hirt, Gerhard A1 - Bleck, Wolfgang A1 - Bobzin, Kirsten A1 - Schleser, Markus A1 - [u.a.], T1 - Hybride Produktionssysteme T2 - Integrative Produktionstechnik für Hochlohnländer / hrsg. von Christian Brecher N2 - Während die virtuelle Produktentstehungskette große Gestaltungsfreiräume bietet, ist die reale Produktentstehungskette durch wesentlich mehr Randbedingungen gekennzeichnet, die nicht oder nur ansatzweise beeinflussbar sind. Die Realisierung des aus logistischer Sicht optimalen One-Piece-Flow bei gleichzeitiger Steigerung von Flexibilität und Produktivität sowie des Verschiebens der Grenze des technologisch Machbaren müssen in zukünftigen Forschungsansätzen gleichermaßen betrachtet werden. Die Grenzverschiebung auf Basis der Integration von Technologien ist dabei ein viel versprechender Ansatz, der es in vielen Fällen ermöglicht, in allen genannten Zielrichtungen gleichermaßen Potentiale zu erschließen. Y1 - 2011 SN - 978-3-642-20692-4 (Print) ; 978-3-642-20693-1 (E-Book) U6 - http://dx.doi.org/10.1007/978-3-642-20693-1_5 SP - 465 EP - 745 PB - Springer CY - Berlin [u.a.] ER - TY - JOUR A1 - Heptner, K. A1 - Wollert, Jörg T1 - FML-Report - VDI-Richtlinie 4485 'E-Commerce und Logistik' JF - Logistik für Unternehmen : das Fachmagazin der internen und externen Logistik Y1 - 2005 SN - 0930-7834 N1 - Printausg. in der Bibliothek vorhanden: 43 Z 513 VL - 19 SP - 58 EP - 59 ER - TY - JOUR A1 - Henn, Gudrun A1 - Polaczek, Christa T1 - Studienerfolg in den Ingenieurwissenschaften JF - Das Hochschulwesen : HSW ; Forum für Hochschulforschung, -praxis und -politik Y1 - 2007 SN - 0018-2974 VL - 55 IS - 5 SP - 144 EP - 147 ER - TY - BOOK A1 - Heinrichs, Horst A1 - Weck, M. A1 - Vonderhagen, H. T1 - CAD-Programmbibliothek für Großrechneranlagen Y1 - 1981 N1 - Report: CAD Berichte. Projekt Rechnergestuetztes Entwickeln, Konstruieren und Fertigen; RWTH Aachen CY - Aachen ER - TY - JOUR A1 - Heinrichs, Horst A1 - Weck, M. A1 - Heimann, A. T1 - Rechnerunterstuetzte Aufbereitung von Finite-Elemente-Rechenmodellen-Erfassung der Bauteilgeometrie JF - Industrieanzeiger. 99 (1977), H. 78 Y1 - 1977 SP - 1509 EP - 1512 ER - TY - JOUR A1 - Heinrichs, Horst A1 - Weck, M. T1 - Wirtschaftliche FEM-Strukturanalyse durch graphisch interaktive Netzaufbereitung JF - Industrie Anzeiger. 103 (1981), H. 79 Y1 - 1981 SP - 16 EP - 20 ER - TY - JOUR A1 - Heinrichs, Horst A1 - Weck, M. T1 - Problemloesungen im Rahmen der konstruktiven Gestaltung JF - Industrieanzeiger. 101 (1979), H. 73 Y1 - 1979 SP - 26 EP - 29 ER - TY - JOUR A1 - Heinrichs, Horst A1 - Weck, M. T1 - Rechnerunterstuetzte Aufbereitung von Finite-Elemente-Rechenmodellen -Erstellen der FEM-Netzwerke JF - Industrieanzeiger. 99 (1977), H. 102 Y1 - 1977 SP - 2059 EP - 2061 ER - TY - BOOK A1 - Heinrichs, Horst A1 - Weck, H. A1 - Gillessen, R. T1 - Abschlussbericht zum Zeichnungssystem Freedraft zur rechnerunterstuetzten Zeichnungserstellung Y1 - 1977 N1 - Report : WZL, Lab. f. Werkzeugmaschinen u. Betriebslehre ; RWTH Aachen CY - Aachen ER - TY - JOUR A1 - Heinrichs, Horst A1 - Weck, H. T1 - Efficient finite-element structural analysis by interactive graphic mesh generation JF - CIRP Annals. 30 (1981), H. 1 Y1 - 1981 SP - 279 EP - 284 ER - TY - JOUR A1 - Heinrichs, Horst A1 - Steinke, P. T1 - Praxisgerechter Einsatz der Finite-Element-Methode zur Bauteilanalyse JF - Industrie Anzeiger. 103 (1981), H. 79 Y1 - 1981 SP - 42 EP - 43 ER - TY - JOUR A1 - Heinrichs, Horst A1 - Haub, A. T1 - Grafische Oberflächen vereinfachen den FEM-Einsatz JF - CAD-CAM Report. 10 (1991), H. 3 Y1 - 1991 SP - 79 EP - 85 ER - TY - JOUR A1 - Heinrichs, Horst T1 - STEP bietet mehr Y1 - 1992 N1 - Konferenz-Einzelbericht : FEM '92 Congress, Int. FEM-Congress, Baden-Baden, DE, 16.-17. Nov, 1992 SP - 327 EP - 344 PB - IKOSS CY - Stuttgart ER - TY - JOUR A1 - Heinrichs, Horst T1 - Mit Grafik schafft FEM den Durchbruch JF - Maschinen, Anlagen, Verfahren (1993) Y1 - 1993 SN - 0343-043X SP - 58 EP - 59 ER - TY - JOUR A1 - Heinrichs, Horst T1 - Verbindung von CAD und CAE mittels der systemneutralen CAD I Schnittstelle Y1 - 1989 N1 - Konferenz-Einzelbericht : FEM '89, International FEM-Congress, IKO Software Service, Baden-Baden, D, 20.-21.11.1989 SP - 391 EP - 408 ER - TY - JOUR A1 - Heinrichs, Horst T1 - Graphische Datenverarbeitung bei FEM-Berechnungen von Maschinen : interaktive Geometrieerfassung u. Netzwerkerstellung Y1 - 1981 N1 - Dissertation, RWTH Aachen ER - TY - JOUR A1 - Heinrichs, Horst T1 - Graphisch interaktive FE-Netzwerksgenerierung mit dem Programm FEDIG auf Rechnern ab 64 KB-Memory mit Digitizer JF - IKO Software Service. 12 (1983) Y1 - 1983 N1 - Konferenz-Einzelbericht : International FEM-Congress. IKO Software Service, Baden-Baden, 14.- 15.11.1983 SP - 191 EP - 215 ER - TY - JOUR A1 - Heinrichs, Horst T1 - Graphisch interaktiver FEM-Berechnungsarbeitsplatz JF - Konstruktion, Elemente, Methoden. 21 (1984), H. 2 Y1 - 1984 SP - 82 EP - 85 ER - TY - JOUR A1 - Haselgruber, Nikolaus A1 - Mautner, Karin A1 - Thiele, Jan T1 - Usage Space Analysis for Reliability Testing JF - Quality and Reliability Engineering International N2 - During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety. Y1 - 2010 U6 - http://dx.doi.org/10.1002/qre.1155 SN - 1099-1638 N1 - Special Issue: Business and Industrial Statistics: Developments and Industrial Practices in Quality and Reliability VL - 26 IS - 8 SP - 877 EP - 885 PB - Wiley CY - New York ER - TY - CHAP A1 - Hartmann, Axel A1 - Kallweit, Stephan A1 - Feldusen, Antje A1 - Schröder, Wolfgang T1 - Detection of upstream propagating sound waves at buffet flow using high-speed PIV BT - 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics ; 9th to 12th July 2012 Lisbon, Portugal Y1 - 2012 N1 - Aerodynamisches Institut ; International Symposium on Applications of Laser Techniques to Fluid Mechanics <16, 2012, Lissabon> ER - TY - JOUR A1 - Harms, Alexander A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Schiebahn, Alexander A1 - Thiele, Regina T1 - Herausforderungen an die Fügetechnik: Leichtbau und Kosteneffizienz beim Elektrofahrzeug JF - Elektromobilität made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westfälischen Technischen Hochschule Aachen ; Ausg. 2010, 2) Y1 - 2010 SN - 0179-079X SP - 58 EP - 60 ER - TY - JOUR A1 - Hanrath, Wilhelm A1 - Plesken, Wilhelm T1 - Group rings and irreducible representations of space groups / by W. Hanrath and W. Plesken JF - Journal für die reine und angewandte Mathematik. 362 (1985) Y1 - 1985 SN - 0075-4102 SP - 130 EP - 140 ER - TY - JOUR A1 - Hanrath, Wilhelm A1 - Plesken, Wilhelm T1 - The lattices of six-dimensional euclidean space JF - Mathematics of computation. 43 (1984), H. 168 Y1 - 1984 SN - 0025-5718 SP - 573 EP - 587 ER - TY - BOOK A1 - Hanrath, Wilhelm T1 - Irreduzible Darstellungen von Raumgruppen Y1 - 1988 N1 - Aachen, Techn. Hochsch., Diss., 1988 CY - Aachen ER - TY - JOUR A1 - Hanrath, Wilhelm T1 - Character tables of some factor groups of space groups JF - Perfect groups / Derek F. Holt and W. Plesken Y1 - 1989 SN - 0-19-853559-7 SP - 357 EP - 359 PB - Clarendon Press CY - Oxford ER -