TY  - CHAP
A1  - Siegert, Petra
A1  - Iding, Hans
A1  - Baumann, Martin
A1  - McLeish, Michael J.
A1  - Kenyon, George L.
A1  - Pohl, Martina
T1  - Broadening of the substrate spectra of two ThDP-dependent decarboxylases using site-directed-mutagenesis
T2  - Proceedings of the 4th International Congress on Biochemical Engineering : 17 and 18 February 2000, Stuttgart
Y1  - 2000
SN  - 3-8167-5570-4
SP  - 38
EP  - 42
ER  - 
TY  - CHAP
A1  - Gorzalka, Philip
A1  - Dahlke, Dennis
A1  - Göttsche, Joachim
A1  - Israel, Martin
A1  - Patel, Dhruvkumar
A1  - Prahl, Christoph
A1  - Schmiedt, Jacob Estevam
A1  - Frommholz, Dirk
A1  - Hoffschmidt, Bernhard
A1  - Linkiewicz, Magdalena
T1  - Building Tomograph–From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input
T2  - EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Christen, Marc
A1  - Bartelt, Perry
A1  - Kowalski, Julia
A1  - Stoffel, Lukus
T1  - Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS
T2  - Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008
N2  - Numerical models have become an essential part of snow avalanche engineering. Recent
advances in understanding the rheology of flowing snow and the mechanics of entrainment and
deposition have made numerical models more reliable. Coupled with field observations and historical
records, they are especially helpful in understanding avalanche flow in complex terrain. However, the
application of numerical models poses several new challenges to avalanche engineers. A detailed
understanding of the avalanche phenomena is required to specify initial conditions (release zone
dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer
based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this
paper we discuss these problems by presenting the computer model RAMMS, which was specially
designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged
equations governing avalanche flow with first and second-order numerical solution schemes. A
tremendous effort has been invested in the implementation of advanced input and output features.
Simulation results are therefore clearly and easily visualized to simplify their interpretation. More
importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model
performance. In this paper we present the governing differential equations, highlight some of the input
and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that
occurred in April 2008, near Klosters/Monbiel, Switzerland.
KW  - snow
KW  - avalanche
Y1  - 2008
SP  - 709
EP  - 716
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Schelthoff, Christof
A1  - Mathieu, Moritz
T1  - Calculation of interception efficiencies for mesh-type air-terminations according to IEC 62305-3 using a dynamic electro-geometrical model
T2  - International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna
Y1  - 2012
SN  - 978-1-4673-1896-9 (E-Book) ; 978-1-4673-1898-3 (Print)
SP  - 1
EP  - 6
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Birgel, Stefan
A1  - Leschinger, Tim
A1  - Wegmann, Kilian
A1  - Staat, Manfred
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Calculation of muscle forces and joint reaction loads in shoulder area via an OpenSim based computer calculation
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
N1  - In der Druckausgabe des Abstractbandes ist dieser Beitrag lose als Erratum beigefügt.
SP  - 116
EP  - 117
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Pfundt, H.
A1  - Vogelsang, D.
A1  - Gerling, Ulrich
T1  - Calculation of the crust profile in aluminium reduction cells by thermal computer modelling
T2  - Light metals 1989 : 118th annual meeting of the Minerals, Metals and Materials Society, Las Vegas, NV, Feb. 27 - Mar. 03. 1989
Y1  - 1988
SP  - 371
EP  - 377
PB  - Minerals, Metals and Materials Soc.
CY  - Warrendale, Pa.
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects
T2  - Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1
Y1  - 1983
SN  - 0-7277-0192-4 (Druckausg.)
SN  - 978-0-7277-5270-3 (E-Book)
N1  - International Conference on Vibration in Nuclear Plant <3, 1982, Keswick>
N1  - Paper 1.10 (Log No. 71)
SP  - 162
EP  - 183
PB  - British Nuclear Energy Society
CY  - London
ER  - 
TY  - CHAP
A1  - Kalker, Ines
A1  - Toll, B.
A1  - Holler, Stefan
A1  - Butenweg, Christoph
A1  - Topping, B. H. V.
A1  - Mota Soares, C. A.
T1  - Capacity analysis of textile retrofitted unreinforced masonry
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...
Y1  - 2004
SN  - 0-948749-95-4
U6  - http://dx.doi.org/10.4203/ccp.79.194
SP  - 431
EP  - 432
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Reindl, Lukas
T1  - Capacity design of masonry buildings under cyclic loading
T2  - Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Liège on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...
Y1  - 2008
SN  - 978-2-87456-063-7
SP  - 201
EP  - 208
PB  - Editions de l'Université de Liège
CY  - Liège
ER  - 
TY  - CHAP
A1  - Schiffer, Fabian
A1  - Bragard, Michael
T1  - Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - http://dx.doi.org/10.1109/REM.2019.8744101
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Case studies in initial sizing for hybrid-electric general aviation aircraft
T2  - 2018 AIAA/IEEE Electric Aircraft Technologies Symposium, Cincinnati, Ohio
Y1  - 2018
U6  - http://dx.doi.org/10.2514/6.2018-5005
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of heterogeneous and volatile product data
T2  - DATA 2020: Data Management Technologies and Applications
N2  - The integration of frequently changing, volatile product data from different manufacturers into a single catalog is a significant challenge for small and medium-sized e-commerce companies. They rely on timely integrating product data to present them aggregated in an online shop without knowing format specifications, concept understanding of manufacturers, and data quality. Furthermore, format, concepts, and data quality may change at any time. Consequently, integrating product catalogs into a single standardized catalog is often a laborious manual task. Current strategies to streamline or automate catalog integration use techniques based on machine learning, word vectorization, or semantic similarity. However, most approaches struggle with low-quality or real-world data. We propose Attribute Label Ranking (ALR) as a recommendation engine to simplify the integration process of previously unknown, proprietary tabular format into a standardized catalog for practitioners. We evaluate ALR by focusing on the impact of different neural network architectures, language features, and semantic similarity. Additionally, we consider metrics for industrial application and present the impact of ALR in production and its limitations.
Y1  - 2021
SN  - 978-3-030-83013-7
U6  - http://dx.doi.org/10.1007/978-3-030-83014-4_7
N1  - International Conference on Data Management Technologies and Applications, DATA 2020, 7-9 July
SP  - 134
EP  - 153
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of low-quality product data by attribute label ranking
T2  - Proceedings of the 9th International Conference on Data Science, Technology and Applications - Volume 1: DATA
Y1  - 2020
SN  - 978-989-758-440-4
U6  - http://dx.doi.org/10.5220/0009831000900101
SP  - 90
EP  - 101
ER  - 
TY  - CHAP
A1  - Schulte-Fischedick, Jan
A1  - Tamme, Rainer
A1  - Herrmann, Ulf
T1  - CFD Analysis of the Cool Down Behaviour of Molten Salt Thermal Storage Systems
T2  - ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences, ASME 2008 2nd International Conference on Energy Sustainability, Jacksonville, Florida, USA, August 10–14, 2008. - Vol. 2
Y1  - 2009
SN  - 978-0-7918-4320-8
U6  - http://dx.doi.org/doi:10.1115/ES2008-54101
N1  - Paper No. ES2008-54101
SP  - 515
EP  - 524
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Luft, Angela
A1  - Gebhardt, Andreas
A1  - Balc, Nicolae
T1  - Challenges of additive manufacturing in production systems
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901003
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01003
ER  - 
TY  - CHAP
A1  - Reisert, Steffen
A1  - Geissler, H.
A1  - Flörke, R.
A1  - Weiler, C.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - Characterisation of aseptic sterilisation processes using an electronic nose
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 45
EP  - 45
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Characteristics of cross-bar block ramp flows
T2  - Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto
Y1  - 2012
SN  - 978-989-8509-01-7
ER  - 
TY  - CHAP
A1  - Roth, J.
A1  - Möhring, S.
A1  - Tippkötter, Nils
T1  - Characterization and evaluation of lignocellulosic biomass 130 hydrolysates for ABE fermentation
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 130
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Tellis, Jane J.
A1  - Duhovic, Miro
T1  - Characterization of tool-part-interaction an interlaminar friction for manufacturing process simulation
T2  - ECCM 17, 17th European Conference on Composite Materials, München, DE, Jun 26-30, 2016
Y1  - 2016
SN  - 978-3-00-053387-7
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Kaspar, K.
A1  - Groebel, Simone
A1  - Kuperjans, Isabel
A1  - Dielmann, Klaus-Peter
A1  - Selmer, Thorsten
T1  - Charakterisierung der Biozönose von Biogasfermentern in Abhängigkeit verschiedener Substrate
T2  - Biogas 2013 : 6. Innovationskongress, 23. - 24.05.2013, Osnabrück, Tagungsband
Y1  - 2013
SN  - 978-3-9813776-3-7
SP  - 69
EP  - 74
PB  - Profair Consult+Project
CY  - Hildesheim
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Schwarte, Rudolf
A1  - Xu, Zhanping
A1  - Ringbeck, Thorsten
A1  - [u.a.], 
T1  - Charge Transfer Simulation in PMD-Structures
T2  - Sensor 99 : proceedings / 9th Int'l Fair and Conference for Sensors, Transducers & Systems, May 18 - 20, 1999, Exhibition Centre Nürnberg/Germany. - Vol. 2
Y1  - 1999
N1  - International Fair and Conference for Sensors, Transducers and Systems <9, 1999, Nürnberg> ; Internationale Messe mit Kongress für Sensoren, Messaufnehmer und Systeme  <9, 1999, Nürnberg>
SP  - 427
EP  - 432
PB  - AMA Service GmbH
CY  - Wunsdorf
ER  - 
TY  - CHAP
A1  - Höfler, M.
A1  - Kneer, R.
A1  - Groß, Rolf Fritz
A1  - Kehrmann, K.
ED  - Vorobieff, P.
T1  - Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows
T2  - Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ;  Volume 89)
Y1  - 2015
SN  - 978-1-84564-946-3 (Print-Ausgabe)
SN  - 978-1-84564-947-0 (Online-Ausgabe)
SN  - 1746-4471
SP  - 89
EP  - 101
PB  - WIT Press
CY  - Southampton
ER  - 
TY  - CHAP
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Zander, W.
A1  - Schubert, J.
A1  - Sukoyan, L. H.
A1  - Begoyan, V.
A1  - Buniatyan, V. V.
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Chemische Sensoren mit Bariumstrontiumtitanat als funktionelle Schicht zur Multiparameterdetektion
T2  - 11. Dresdner Sensor-Symposium : 9.-11.12.2013
Y1  - 2013
SN  - 978-3-9813484-5-3
SP  - 368
EP  - 372
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
A1  - Rau, Christoph
A1  - Sattler, Johannes, Christoph
T1  - Choice of solar share of a hybrid power plant of a central receiver system and a biogas plant in dependency of the geographical latitude
T2  - World Renewable Energy Congress-Sweden : 8 -13 May, 2011, Linköping, Sweden / ed.: Bahram Moshfegh
Y1  - 2011
SN  - 9789173930703
SP  - 3710
EP  - 3717
PB  - Univ. Electronic Pr.
CY  - Linköping
ER  - 
TY  - CHAP
A1  - Blanke, Tobias
A1  - Dring, Bernd
A1  - Vontein, Marius
A1  - Kuhnhenne, Markus
T1  - Climate Change Mitigation Potentials of Vertical Building Integrated Photovoltaic
T2  - 8th International Workshop on Integration of Solar Power into Power Systems : 16-17 October 2018, Stockholm, Sweden
Y1  - 2018
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Hammer, Andreas
A1  - Vieth, Matthias
A1  - Maier, Frank
T1  - Co-Plot as a new multivariate analysis method for operations management research?
T2  - Papers of the 12th International EurOMA Conference on Operational and Global Competitiveness, Budapest, Hungary, June 19-22, 2005 / Editor: Krisztina Demeter
Y1  - 2005
SN  - 963-218-455-6
SP  - 1007
EP  - 1016
ER  - 
TY  - CHAP
A1  - Dey, Thomas
A1  - Elsen, Ingo
A1  - Ferrein, Alexander
A1  - Frauenrath, Tobias
A1  - Reke, Michael
A1  - Schiffer, Stefan
ED  - Makedon, Fillia
T1  - CO2 Meter: a do-it-yourself carbon dioxide measuring device for the classroom
T2  - PETRA 2021: The 14th PErvasive Technologies Related to Assistive Environments Conference
N2  - In this paper we report on CO2 Meter, a do-it-yourself carbon dioxide measuring device for the classroom. Part of the current measures for dealing with the SARS-CoV-2 pandemic is proper ventilation in indoor settings. This is especially important in schools with students coming back to the classroom even with high incidents rates. Static ventilation patterns do not consider the individual situation for a particular class. Influencing factors like the type of activity, the physical structure or the room occupancy are not incorporated. Also, existing devices are rather expensive and often provide only limited information and only locally without any networking. This leaves the potential of analysing the situation across different settings untapped. Carbon dioxide level can be used as an indicator of air quality, in general, and of aerosol load in particular. Since, according to the latest findings, SARS-CoV-2 can be transmitted primarily in the form of aerosols, carbon dioxide may be used as a proxy for the risk of a virus infection. Hence, schools could improve the indoor air quality and potentially reduce the infection risk if they actually had measuring devices available in the classroom. Our device supports schools in ventilation and it allows for collecting data over the Internet to enable a detailed data analysis and model generation. First deployments in schools at different levels were received very positively. A pilot installation with a larger data collection and analysis is underway.
KW  - embedded hardware
KW  - sensor networks
KW  - information systems
KW  - education
KW  - do-it-yourself
Y1  - 2021
SN  - 9781450387927
U6  - http://dx.doi.org/10.1145/3453892.3462697
N1  - PETRA '21: The 14th PErvasive Technologies Related to Assistive Environments Conference Corfu Greece 29 June 2021- 2 July 2021
SP  - 292
EP  - 299
PB  - Association for Computing Machinery
CY  - New York
ER  - 
TY  - CHAP
A1  - Steinbauer, Gerald
A1  - Ferrein, Alexander
T1  - CogRob 2018 : 
Cognitive Robotics Workshop.
Proceedings of the 11th Cognitive Robotics Workshop 2018
co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018).
Tempe, AZ, USA, October 27th, 2018.
T2  - CEUR workshop proceedings
Y1  - 2019
SN  - 1613-0073
N1  - edited by Gerald Steinbauer, Alexander Ferrein
IS  - Vol-2325
ER  - 
TY  - CHAP
A1  - Lindenlauf, Simon
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
T1  - Cold Boot Attacks on DDR2 and DDR3 SDRAM
T2  - 10th International Conference on Availability, Reliability and Security (ARES) 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1109/ARES.2015.28
SP  - 287
EP  - 292
ER  - 
TY  - CHAP
A1  - Bitz, Andreas
A1  - Alaydrus, M.
A1  - Streckert, J.
A1  - Hansen, V.
T1  - Combination of the hybrid/sup [2]/-method and the FDTD-method for solution of boundary value problems with electrically large and high-resolution bodies
T2  - IEEE Antennas and Propagation Society International Symposium (IEEE Cat. No.02CH37313) 2002 : San Antonio, TX, USA, 16-21 June
Y1  - 2002
SN  - 0-7803-7330-8
U6  - http://dx.doi.org/10.1109/APS.2002.1018209
SP  - 278
EP  - 281
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Ashikaga, Mitsugu
A1  - Yamaguchi, Masato
A1  - Ogino, Tomoyuki
A1  - Aoki, Shigeki
A1  - Wirsum, Manfred
A1  - Funke, Harald
A1  - Kusterer, Karsten
T1  - Combined heat and power supply demonstration of Micro-Mix Hydrogen Combustion Applied to M1A-17 Gas Turbine
T2  - Proceedings of ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition (GT2022) (Volume 3A)
N2  - Kawasaki Heavy Industries, Ltd. (KHI), Aachen University of Applied Sciences, and B&B-AGEMA GmbH have investigated the potential of low NOx micro-mix (MMX) hydrogen combustion and its application to an industrial gas turbine combustor. Engine demonstration tests of a MMX combustor for the M1A-17 gas turbine with a co-generation system were conducted in the hydrogen-fueled power generation plant in Kobe City, Japan.
This paper presents the results of the commissioning test and the combined heat and power (CHP) supply demonstration. In the commissioning test, grid interconnection, loading tests and load cut-off tests were successfully conducted. All measurement results satisfied the Japanese environmental regulation values. Dust and soot as well as SOx were not detected. The NOx emissions were below 84 ppmv at 15 % O2. The noise level at the site boundary was below 60 dB. The vibration at the site boundary was below 45 dB.
During the combined heat and power supply demonstration, heat and power were supplied to neighboring public facilities with the MMX combustion technology and 100 % hydrogen fuel. The electric power output reached 1800 kW at which the NOx emissions were 72 ppmv at 15 % O2, and 60 %RH. Combustion instabilities were not observed. The gas turbine efficiency was improved by about 1 % compared to a non-premixed type combustor with water injection as NOx reduction method. During a total equivalent operation time of 1040 hours, all combustor parts, the M1A-17 gas turbine as such, and the co-generation system were without any issues.
KW  - industrial gas turbine
KW  - combustor development
KW  - fuels
KW  - hydrogen
KW  - emission
Y1  - 2022
SN  - 978-0-7918-8599-4
U6  - http://dx.doi.org/10.1115/GT2022-81620
N1  - ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition
June 13–17, 2022 Rotterdam, Netherlands
PB  - American Society of Mechanical Engineers
CY  - Fairfield
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Yamaguchi, Masato
A1  - Aoki, Shigeki
A1  - Wirsum, Manfred
A1  - Funke, Harald
A1  - Kusterer, Karsten
T1  - Combustor development and engine demonstration of micro-mix hydrogen combustion applied to M1A-17 gas turbine
T2  - ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition // Volume 3B: Combustion, Fuels, and Emissions
N2  - Kawasaki Heavy Industries, LTD. (KHI) has research and development projects for a future hydrogen society. These projects comprise the complete hydrogen cycle, including the production of hydrogen gas, the refinement and liquefaction for transportation and storage, and finally the utilization in a gas turbine for electricity and heat supply. Within the development of the hydrogen gas turbine, the key technology is stable and low NOx hydrogen combustion, namely the Dry Low NOx (DLN) hydrogen combustion.

KHI, Aachen University of Applied Science, and B&B-AGEMA have investigated the possibility of low NOx micro-mix hydrogen combustion and its application to an industrial gas turbine combustor. From 2014 to 2018, KHI developed a DLN hydrogen combustor for a 2MW class industrial gas turbine with the micro-mix technology. Thereby, the ignition performance, the flame stability for equivalent rotational speed, and higher load conditions were investigated. NOx emission values were kept about half of the Air Pollution Control Law in Japan: 84ppm (O2-15%). Hereby, the elementary combustor development was completed.

From May 2020, KHI started the engine demonstration operation by using an M1A-17 gas turbine with a co-generation system located in the hydrogen-fueled power generation plant in Kobe City, Japan. During the first engine demonstration tests, adjustments of engine starting and load control with fuel staging were investigated. On 21st May, the electrical power output reached 1,635 kW, which corresponds to 100% load (ambient temperature 20 °C), and thereby NOx emissions of 65 ppm (O2-15, 60 RH%) were verified. Here, for the first time, a DLN hydrogen-fueled gas turbine successfully generated power and heat.
KW  - industrial gas turbine
KW  - combustor development
KW  - engine demonstration
KW  - fuels
KW  - hydrogen
Y1  - 2021
U6  - http://dx.doi.org/10.1115/GT2021-59666
N1  - ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. June 7–11, 2021. Virtual, Online.

Paper No: GT2021-59666, V03BT04A014
ER  - 
TY  - CHAP
A1  - Fleischhaker, Robert
A1  - Gebs, Raphael
A1  - Budnicki, Aleksander
A1  - Wolf, M.
A1  - Kleinbauer, Jochen
A1  - Sutter, Dirk H.
T1  - Compact gigawatt-class sub-picosecond Yb:YAG thin-disk regenerative chirped-pulse amplifier with high average power at up to 800 kHz
T2  - Lasers and electro-optics europe (CLEO EUROPE/IQEC) : International quantum electronics conference : 12 - 16 May 2013, Munich, GE.
Y1  - 2013
SN  - 978-1-4799-0593-5
U6  - http://dx.doi.org/10.1109/CLEOE-IQEC.2013.6801054
N1  - Lasers and Electro-Optics Europe (CLEO EUROPE/IQEC) <5, 2013, Munich, GE>
PB  - IEEE Computer Society
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Comparative assessment of parallel-hybrid-electric propulsion systems for four different aircraft
T2  - AIAA SciTech Forum 2020, 06.01.2020 - 10.01.2020, Orlando
Y1  - 2020
U6  - http://dx.doi.org/10.2514/6.2020-1502
ER  - 
TY  - CHAP
A1  - Finger, Felix
T1  - Comparative Performance and Benefit Assessment of VTOL and CTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress (DLRK) 2016, 13.-15.9.2016
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Comparison of 2D dam-break waves with VOF and SPH method
T2  - Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China
Y1  - 2013
SP  - Artikelkennnummer: A11113
PB  - Tsinghua Univ. Press
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Takenaga, Shoko
A1  - Werner, Frederik
A1  - Sawada, Kazuaki
A1  - Schöning, Michael Josef
T1  - Comparison of label-free ACh image sensors based on CCD and LAPS
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/4.2.6
SP  - 356
EP  - 359
ER  - 
TY  - CHAP
A1  - Leise, Philipp
A1  - Simon, Nicolai
A1  - Altherr, Lena
T1  - Comparison of Piecewise Linearization Techniques to Model Electric Motor Efficiency Maps: A Computational Study
T2  - Operations Research Proceedings 2019
N2  - To maximize the travel distances of battery electric vehicles such as cars or buses for a given amount of stored energy, their powertrains are optimized energetically. One key part within optimization models for electric powertrains is the efficiency map of the electric motor. The underlying function is usually highly nonlinear and nonconvex and leads to major challenges within a global optimization process. To enable faster solution times, one possibility is the usage of piecewise linearization techniques to approximate the nonlinear efficiency map with linear constraints. Therefore, we evaluate the influence of different piecewise linearization modeling techniques on the overall solution process and compare the solution time and accuracy for methods with and without explicitly used binary variables.
KW  - MINLP
KW  - Powertrain
KW  - Piecewise linearization
KW  - Efficiency optimization
Y1  - 2020
SN  - 978-3-030-48439-2
SN  - 978-3-030-48438-5
U6  - http://dx.doi.org/10.1007/978-3-030-48439-2_55
N1  - Annual International Conference of the German Operations Research Society (GOR), Dresden, Germany, September 4-6, 2019
SP  - 457
EP  - 463
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Latzke, Markus
A1  - Alexopoulos, Spiros
A1  - Kronhardt, Valentina
A1  - Rendón, Carlos
A1  - Sattler, Johannes, Christoph
T1  - Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver
T2  - Energy Procedia
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.egypro.2015.03.142
SN  - 1876-6102
N1  - International Conference on Concentrating Solar Power and Chemical Energy Systems, SolarPACES 2014, Beijing, China
SP  - 1327
EP  - 1334
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
A1  - Rau, Christoph
T1  - Comparison of steady-state and transient simulations for solar tower power plants with open-volumetric receiver
T2  - SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain
Y1  - 2011
CY  - Granada
ER  - 
TY  - CHAP
A1  - Wolf, Martin
A1  - König, Johannes Alexander
ED  - Eibl, Maximilian
ED  - Gaedke, Martin
T1  - Competence Developing Games – Ein Überblick
T2  - INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft für Informatik
N2  - Es existieren verschiedenste Arten von Spielen, die versuchen, die Motivation einer Spielsituation in einen ernsten Kontext zu überführen. In diesem Artikel wird der Überbegriff „Competence Developing Games“ definiert und anhand von Beispielen erläutert. Dafür werden Erkennungskriterien vorgestellt, entsprechende Spieltypen erläutert und eine Zuordnung durch-geführt.
KW  - Competence Developing Gam
KW  - Serious Game
KW  - Education
KW  - Gamification
KW  - Bewertungsframework
Y1  - 2017
SN  - 978-3-88579-669-5
U6  - http://dx.doi.org/10.18420/in2017_32
SP  - 385
EP  - 391
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Meeßen, Marcus
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
ED  - Lepuschitz, Wilfried
T1  - Compiling ROS Schooling Curricula via Contentual Taxonomies
T2  - Robotics in Education
Y1  - 2021
SN  - 978-3-030-67411-3
U6  - http://dx.doi.org/10.1007/978-3-030-67411-3_5
N1  - RiE: International Conference on Robotics in Education (RiE);
Advances in Intelligent Systems and Computing book series (AISC, volume 1316)
SP  - 49
EP  - 60
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Hüning, Felix
T1  - Complexity for heterogeneous classes: teaching embedded systems using an open project approach
T2  - Varietas delectat: Complexity is the new normality - 47th Annual Conference, Budapest, Hungary16th - 20th September 2019. SEFI 47th Annual Conference Proceedings
Y1  - 2019
SN  - 978-2-87352-018-2
SP  - 540
EP  - 549
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Barroso de Aguiar, Jose
ED  - Jalali, Said
ED  - Camoes, Aires
ED  - Ferrera, Rui Miguel
T1  - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles
T2  - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal
Y1  - 2006
SN  - 972-99179-1-4
SP  - 185
EP  - 192
PB  - Universidade do Minho, Departamento de Engenharia Civil
CY  - Guimarães
ER  - 
TY  - CHAP
A1  - Land, Ingmar
A1  - A., Peter
A1  - Gligorevic, Snjezana
T1  - Computation of symbol-wise mutual information in transmission systems with logAPP decoders and application to EXIT charts
T2  - 5th International ITG Conference on Source and Channel Coding (SCC) : January 14 - 16, 2004, Erlangen ; conference record. (ITG-Fachbericht ; 181)
Y1  - 2004
SN  - 3-8007-2802-8
SP  - 195
EP  - 202
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Chen, B.-H.
A1  - Ballmann, Josef
T1  - Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests
T2  - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden
Y1  - 2007
PB  - KTH
CY  - Stockholm
ER  - 
TY  - CHAP
A1  - Voronkova, Eva B.
A1  - Bauer, Svetlana M.
A1  - Kotliar, Konstantin
T1  - Computer simulation of the cornea-scleral shell as applied to pressure-volume relationship in the human eye
T2  - 2014 International Conference on Computer Technologies in Physical and Engineering Applications :  ICCTPEA 2014 : proceedings : June 30 2014-July 4 2014, St. Petersburg
Y1  - 2014
SN  - 978-1-4799-5315-8
SP  - 204
EP  - 205
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
ED  - Erni, Daniel
T1  - Computing olympic gold: Ski jumping as an example
T2  - 1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen
Y1  - 2016
SN  - 978-3-940402-06-6
U6  - http://dx.doi.org/10.17185/duepublico/40821
SP  - 54
EP  - 55
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Kemper, Hans
A1  - Hellenbroich, Gereon
A1  - Esch, Thomas
T1  - Concept of an innovative passenger-car hybrid drive for European driving conditions
T2  - Hybrid vehicles and energy management : 6th symposium ; 18th and 19th February 2009, Stadthalle Braunschweig
N2  - The downsizing of spark ignition engines in conjunction with turbocharging is considered to be a promising method for reducing CO₂ emissions. Using this concept, FEV has developed a new, highly efficient drivetrain to demonstrate fuel consumption reduction and drivability in a vehicle based on the Ford Focus ST. The newly designed 1.8L turbocharged gasoline engine incorporates infinitely variable intake and outlet control timing and direct fuel injection utilizing piezo injectors centrally located. In addition, this engine uses a prototype FEV engine control system, with software that was developed and adapted entirely by FEV. The vehicle features a 160 kW engine with a maximum mean effective pressure of 22.4 bar and 34 % savings in simulated fuel consumption. During the first stage, a new electrohydraulically actuated hybrid transmission with seven forward gears and one reverse gear and a single dry starting clutch will be integrated. The electric motor of the hybrid is directly connected to the gear set of the transmission. Utilizing the special gear set layout, the electric motor can provide boost during a change of gears, so that there is no interruption in traction. Therefore, the transmission system combines the advantages of a double clutch controlled gear change (gear change without an interruption in traction) with the efficient, cost-effective design of an automated manual transmission system. Additionally, the transmission provides a purely electric drive system and the operation of an air-conditioning compressor during the engine stop phases. One other alternative is through the use of CAI (Controlled Auto Ignition), which incorporates a process developed by FEV for controlled compression ignition.
Y1  - 2009
SN  - 978-3-937655-20-8
SP  - 264
EP  - 287
PB  - Gesamtzentrum für Verkehr (GZVB)
CY  - Braunschweig
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Finger, Felix
T1  - Conceptual Design of a Modular 150 kg Vertical Take-off and Landing Unmanned Aerial Vehicle
T2  - Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany
Y1  - 2019
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Jarke, Matthias
A1  - Gebhardt, Michael
A1  - Jacobs, Stephan
A1  - Nissen, Hans W.
T1  - Conflict analysis across heterogeneous viewpoints: formalization and visualization
T2  - Proceedings of the 29th Annual Hawaii International Conference on System Sciences
Y1  - 1996
SN  - 0-8186-7324-9
U6  - http://dx.doi.org/10.1109/HICSS.1996.493191
SP  - 199
EP  - 208
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Shahidi, Parham
A1  - Enning, Manfred
T1  - Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Izquierdo Tello, César
A1  - Damm, Sebastian
T1  - Connecting a pedelec to the cloud as basis for gamification in multi modal mobility planning
T2  - MobileCloud 2014 : 2nd IEEE International Conference on Mobile Cloud Computing, Services, and Engineering Oxford, United Kingdom 7-10 April 2014
Y1  - 2014
SN  - 978-1-4799-2504-9
U6  - http://dx.doi.org/10.1109/MobileCloud.2014.25
SP  - 101
EP  - 108
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Hofmann, Till
A1  - Mataré, Victor
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Constraint-based online transformation of abstract plans into executable robot actions
T2  - Proceedings of the 2018 AAAI Spring Symposium on Integrating Representation, Reasoning, Learning, and Execution for Goal Directed Autonomy
Y1  - 2018
SP  - 549
EP  - 553
ER  - 
TY  - CHAP
A1  - Herrmann, Ulf
A1  - Vorbrugg, O.
A1  - Nava, P.
T1  - Construction and Commissioning Process of the Andasol Solar Field
T2  - SolarPACES 2009 : electricity, fuels and clean water powered by the sun ; 15 - 18 September 2009, Berlin, Germany ; the 15th SolarPACES conference ; proceedings
Y1  - 2009
SN  - 978-3-00-028755-8
PB  - Deutsches Zentrum für Luft- u. Raumfahrt
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Paulsen, Svea
A1  - Hoffstadt, Kevin
A1  - Krafft, Simone
A1  - Leite, A.
A1  - Zang, J.
A1  - Fonseca-Zang, W.
A1  - Kuperjans, Isabel
T1  - Continuous biogas production from sugarcane as sole substrate
T2  - Energy Reports
Y1  - 2020
U6  - http://dx.doi.org/10.1016/j.egyr.2019.08.035
N1  - 6th International Conference on Energy and Environment Research, ICEER 2019, 22–25 July, University of Aveiro, Portugal
VL  - 6
IS  - Supplement 1
SP  - 153
EP  - 158
PB  - Elsevier
ER  - 
TY  - CHAP
A1  - Peters, H.
A1  - Ziemons, Karl
A1  - Dammers, J.
A1  - Müller-Veggian, Mattea
ED  - Nenonen, Jukka
T1  - Continuous head motion detection during MEG measurement using head location coils
T2  - Proceedings of the 12th International Conference on Biomagnetism : August 13 - 17, 2000, Helsinki University of Technology, Espoo, Finland
Y1  - 2001
SN  - 951-22-5401-8
N1  - Biomag <12, 2000, Espoo> ; Teknillinen Korkeakoulu <Helsinki> ; International Conference on Biomagnetism <12, 2000, Espoo>
PB  - Helsinki Univ. of Technology, Laboratory of Biomedical Engineering
CY  - Espoo
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Schreiber, Marc
A1  - Zündorf, Albert
T1  - Continuously evaluated research projects in collaborative decoupled environments
T2  - 2018 ACM/IEEE 5th International Workshop on Software Engineering Research and Industrial PracticePractice, May 29, 2018, Gothenburg, Sweden : SER&IP' 18
N2  - Often, research results from collaboration projects are not transferred into productive environments even though approaches are proven to work in demonstration prototypes. These demonstration prototypes are usually too fragile and error-prone to be transferred
easily into productive environments. A lot of additional work is required.
Inspired by the idea of an incremental delivery process, we introduce an architecture pattern, which combines the approach of Metrics Driven Research Collaboration with microservices for the ease of integration. It enables keeping track of project goals over the course of the collaboration while every party may focus on their expert skills: researchers may focus on complex algorithms,
practitioners may focus on their business goals.
Through the simplified integration (intermediate) research results can be introduced into a productive environment which enables
getting an early user feedback and allows for the early evaluation of different approaches. The practitioners’ business model benefits throughout the full project duration.
Y1  - 2018
SP  - 1
EP  - 9
PB  - ACM
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Schulte, Jonas
A1  - Schwager, Christian
A1  - Frantz, Cathy
A1  - Schloms, Felix
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Control concept for a molten salt receiver in star design: Development, optimization and testing with cloud passage scenarios
T2  - SolarPACES conference proceedings
N2  - A promising approach to reduce the system costs of molten salt solar receivers is to enable the irradiation of the absorber tubes on both sides. The star design is an innovative receiver design, pursuing this approach. The unconventional design leads to new challenges in controlling the system. This paper presents a control concept for a molten salt receiver system in star design. The control parameters are optimized in a defined test cycle by minimizing a cost function. The control concept is tested in realistic cloud passage scenarios based on real weather data. During these tests, the control system showed no sign of unstable behavior, but to perform sufficiently in every scenario further research and development like integrating Model Predictive Controls (MPCs) need to be done. The presented concept is a starting point to do so.
KW  - Molten salt receiver
KW  - Star design
KW  - Control optimization
KW  - Cloud passages
Y1  - 2023
U6  - http://dx.doi.org/10.52825/solarpaces.v1i.693
SN  - 2751-9899 (online)
N1  - 28th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27-30 September, Albuquerque, NM, USA
IS  - Vol. 1
PB  - TIB Open Publishing
CY  - Hannover
ER  - 
TY  - CHAP
A1  - Beer, Stefan
A1  - Haidn, O.J.
A1  - Willms, Herbert
ED  - Carvalho, Maria da Graça
T1  - Control of stoichiometric propellant supply in an H2/O2-spinning reserve system
T2  - Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)
Y1  - 1995
SN  - 2-88124-619-2
SP  - 825
EP  - 838
PB  - Gordon and Breach
CY  - Basel [u.a.]
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemueller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling Logistics Robots with the Action-based Language YAGI
T2  - Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemüller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling logistics robots with the action-based language YAGI
T2  - Intelligent Robotics and Applications: 9th International Conference, ICIRA 2016, Tokyo, Japan, August 22-24, 2016, Proceedings, Part I
Y1  - 2016
SN  - 978-3-319-43505-3 (Print)
SN  - 978-3-319-43506-0 (Online)
U6  - http://dx.doi.org/10.1007/978-3-319-43506-0_46
N1  - Series: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
VL  - 9834
SP  - 525
EP  - 537
PB  - Springer
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
A1  - Plessmann, K. W.
T1  - Controlling processes by operating-point based hybride observers
T2  - EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies
Y1  - 1993
SN  - 3-86073-176-9
SP  - 1151
EP  - 1155
PB  - Verl. d. Augustinus Buchh.
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Cost Estimation Methods for Hybrid-Electric General Aviation Aircraft
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Kötter, Jens
A1  - Decker, Stefan
A1  - Detzler, Raphael
A1  - Schäfer, Jochen
A1  - Schmitz, Mark
A1  - Herrmann, Ulf
T1  - Cost Reduction of Solar Fields with HelioTrough Collector
Y1  - 2012
N1  - Concentration Solar Power and Chemical Energy Systemes : SolarPaces 2012, September 11 14 2002, Marrakesh, Morroco
PB  - FLAGSOL
CY  - Köln
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Kraft, Bodo
A1  - Zündorf, Albert
T1  - Cost-efficient quality assurance of natural language processing tools through continuous monitoring with continuous integration
T2  - 3rd International Workshop on Software Engineering Research and Industrial Practice
Y1  - 2016
U6  - http://dx.doi.org/10.1145/2897022.2897029
N1  - SER&IP’16, May 17 2016, Austin, TX, USA
SP  - 46
EP  - 52
ER  - 
TY  - CHAP
A1  - Jockwer, R.
A1  - Kleiber, M.
A1  - Uibel, Thomas
ED  - Görlacher, Rainer
T1  - Criteria for Evaluating the Simplification of Design Rules for Dowel-type Fasteners
T2  - International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia
Y1  - 2018
SP  - 461
EP  - 466
PB  - Timber Scientific Publishing, KIT Holzbau und Baukonstruktionen
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - CRVM: Circular Random Variable-based Matcher - A Novel Hashing Method for Fast NN Search in High-dimensional Spaces
T2  - Proceedings of the 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018
Y1  - 2018
SN  - 978-989-758-276-9
U6  - http://dx.doi.org/10.5220/0006692802140221
SP  - 214
EP  - 221
ER  - 
TY  - CHAP
A1  - Stephan, Achim
A1  - Heuermann, Holger
A1  - Prantner, Michael
T1  - Cutting human tissue with novel atmospheric-pressure microwave plasma jet
T2  - 46th European Microwave Conference (EuMC)
Y1  - 2016
SN  - 978-2-87487-043-9
U6  - http://dx.doi.org/10.1109/EuMC.2016.7824490
SP  - 902
EP  - 905
PB  - IEEE
ER  - 
TY  - CHAP
A1  - König, Johannes Alexander
A1  - Wolf, Martin
T1  - Cybersecurity awareness training provided by the competence developing game GHOST
T2  - ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions
N2  - This paper introduces a Competence Developing Game (CDG) for the purpose of a cybersecurity awareness training for businesses. The target audience will be discussed in detail to understand their requirements. It will be explained why and how a mix of business simulation and serious game meets these stakeholder requirements. It will be shown that a tablet and touchscreen based approach is the most suitable solution. In addition, an empirical study will be briefly presented. The study was carried out to examine how an interaction system for a 3D-tablet based CDG has to be designed, to be manageable for non-game experienced employees. Furthermore, it will be explained which serious content is necessary for a Cybersecurity awareness training CDG and how this content is wrapped in the game
KW  - Awareness
KW  - CDG
KW  - Serious Game
KW  - tablet game
KW  - business simulation
Y1  - 2018
SN  - 978-1-61208-616-3
N1  - Proceeding of the Eleventh International Conference on Advances in Computer-Human Interactions (ACHI 2018), Rome, Italy.
SP  - 81
EP  - 87
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
T1  - Damage reduction system for masonry infill walls under seismic loading
T2  - ce/papers
N2  - Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.
KW  - earthquakes
KW  - in-plane and out-of-plane failure
KW  - INODIS
KW  - RC frames
Y1  - 2018
U6  - http://dx.doi.org/10.1002/cepa.863
N1  - Special Issue: ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete
VL  - 2
IS  - 4
SP  - 267
EP  - 273
PB  - Ernst & Sohn Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Dielmann, Klaus-Peter
T1  - Darstellung des Erneuerbaren Energiegesetzes (EEG) und dessen Auswirkungen
N2  - Erneuerbares Energien-Gesetz: Anwendungsbereich, Abnahme- und Vergütungspflicht, Vergütungssätze, Netzkosten, Ausgleichsregelungen Auswirkungen des EEG: Photovoltaik, Windkraft, Biomasse, Wasserkraft, Klär-, Deponie- und Grubengas, Geothermie Zusammenfassung und Ausblick
KW  - Energierecht
KW  - Erneuerbares Energiengesetz
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Göttsche, Joachim
T1  - Das Gebäude-Armaturenbrett (GAB) - ein hochauflösendes Monitoring-Tool für Verbrauchsdaten in Privathaushalten
T2  - Energieeffizienz + Bestand : energetische Sanierung von Gebäuden ; internationales Anwenderforum ; 14./15. Februar 2008, Kloster Banz, Bad Staffelstein
Y1  - 2008
SN  - 978-3-934681-68-2
SP  - 216
EP  - 223
PB  - OTTI
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Fissabre, Anke
A1  - Schmidt, Klaus
A1  - Sonnleitner, Andrea
T1  - Das Lehnsmühlschloß in Ortrand – ein sächsisches Herrenhaus der Renaissance
T2  - Wandel im Wohnbau zwischen Gotik und Barock : die sächsisch-böhmische Entwicklung im überregionalen Vergleich
Y1  - 2012
SN  - 978-3-89445-390-9
N1  - Jahrbuch für Hausforschung ; 53
SP  - 487
EP  - 501
PB  - Jonas
CY  - Marburg
ER  - 
TY  - CHAP
A1  - Schmiegel, A.
A1  - Koch, K.
A1  - Dittmer, M.
A1  - Braun, M.
A1  - Landau, M.
A1  - Dick, C.
A1  - Bragard, Michael
A1  - [u.a.], 
T1  - Das Sol-ion System : ein System zur Optimierung des Eigenverbrauchs von PV-Strom
T2  - Photovoltaische Solarenergie : 25. Symposium ; 03. - 05. März 2010, Kloster Banz, Bad Staffelstein. - (Wissen für Profis)
Y1  - 2010
SN  - 978-3-941785-23-6
SP  - 354
EP  - 359
PB  - OTTI, Ostbayerisches Technologie-Transfer-Inst.
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Becker, Jörg
A1  - Eggert, Mathias
A1  - Fleischer, Stefan
A1  - Heddier, Marcel
A1  - Knackstedt, Ralf
T1  - Data Warehouse Design and Legal Visualization – The Applicability of H2 for Reporting
T2  - Proceedings of the 23rd Australasian Conference on Information Systems 2012
Y1  - 2012
N1  - Australasian Conference on Information Systems (23rd : 2012 : Geelong, Victoria)
ER  - 
TY  - CHAP
A1  - Stieglitz, Kristian
A1  - Wollert, Jörg
T1  - Database driven modernization and expansion of storage systems
T2  - Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2
Y1  - 2010
SN  - 978-1-936338-03-0
SP  - 180
EP  - 183
PB  - IIIS
CY  - Winter Garden, Fla.
ER  - 
TY  - CHAP
A1  - Weber, Niklas
A1  - Wolf, Martin
ED  - Barton, Thomas
T1  - Datenerhebung für die CDG-Forschung
T2  - Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)
Y1  - 2017
SN  - 978-3-944330-56-3
SP  - 218
EP  - 227
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Golland, Alexander
ED  - Ochs, Carsten
ED  - Friedewald, Michael
ED  - Hess, Thomas
ED  - Lamla, Jörn
T1  - Datenschutzregulierung als Eingriff in Wertschöpfungsmodelle
T2  - Die Zukunft der Datenökonomie : zwischen Geschäftsmodell, Kollektivgut und Verbraucherschutz
N2  - Das Kopplungsverbot verbietet, die Nutzung einer Dienstleistung von der Erteilung einer nicht für die Leistungserbringung erforderlichen Einwilligung abhängig zu machen. Personalisierte Werbung wird hierdurch erheblich erschwert. Anbieter können jedoch durch Bereitstellung eines alternativen, einwilligungsfreien Zugangs zu derselben Leistung ihren Dienst datenschutzkonform anbieten. Ein solcher Zugang muss nicht zwingend in Form eines fixen Entgelts gestaltet sein. Vielmehr ist es datenschutzrechtlich in gewissem Umfang zulässig, Preise unter Einbeziehung personenbezogener Daten dynamisch zu gestalten.
KW  - Informationsgesellschaft
KW  - Internetökonomie
KW  - Digitalisierung
KW  - Geschäftsmodell
KW  - Open Data
Y1  - 2019
SN  - 978-3-658-27510-5
N1  - Konferenz: Zukunft der Datenökonomie 2018,
11.10-12.10.2018.
Bayerische Akademie der Wissenschaften, München, Deutschland
SP  - 45
EP  - 68
PB  - Springer Fachmedien
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Kuperjans, Isabel
ED  - Bourg, Dominique
ED  - Erkman, Suren
T1  - Decision-support-system for technical, economical and ecological design and evaluation of industrial energy systems
T2  - Industrial ecology and sustainability : conferences and workshops ; September 22 - 25, 1999, Troyes, France
Y1  - 2000
PB  - Université de technologie de Troyes Genève : Institute for communication and analysis of science and technology
CY  - [Troyes]
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Linguistic Terms in Golog
T2  - FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0074-1424-4
SN  - 1613-0073
ER  - 
TY  - CHAP
A1  - Schulte-Tigges, Joschua
A1  - Matheis, Dominik
A1  - Reke, Michael
A1  - Walter, Thomas
A1  - Kaszner, Daniel
ED  - Krömker, Heidi
T1  - Demonstrating a V2X enabled system for transition of control and minimum risk manoeuvre when leaving the operational design domain
T2  - HCII 2023: HCI in Mobility, Transport, and Automotive Systems
N2  - Modern implementations of driver assistance systems are evolving from a pure driver assistance to a independently acting automation system. Still these systems are not covering the full vehicle usage range, also called operational design domain, which require the human driver as fall-back mechanism. Transition of control and potential minimum risk manoeuvres are currently research topics and will bridge the gap until full autonomous vehicles are available. The authors showed in a demonstration that the transition of control mechanisms can be further improved by usage of communication technology. Receiving the incident type and position information by usage of standardised vehicle to everything (V2X) messages can improve the driver safety and comfort level. The connected and automated vehicle’s software framework can take this information to plan areas where the driver should take back control by initiating a transition of control which can be followed by a minimum risk manoeuvre in case of an unresponsive driver. This transition of control has been implemented in a test vehicle and was presented to the public during the IEEE IV2022 (IEEE Intelligent Vehicle Symposium) in Aachen, Germany.
KW  - V2X
KW  - Transiton of Control
KW  - Minimum Risk Manoeuvre
KW  - Operational Design Domain
KW  - Connected Automated Vehicle
Y1  - 2023
SN  - 978-3-031-35677-3 (Print)
SN  - 978-3-031-35678-0 (Online)
U6  - http://dx.doi.org/10.1007/978-3-031-35678-0_12
N1  - 5th International Conference, MobiTAS 2023, Held as Part of the 25th HCI International Conference, HCII 2023, Copenhagen, Denmark, July 23–28, 2023.
SP  - 200
EP  - 210
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Mandelartz, Johannes
T1  - Der Aluminium-Sekundärstoffstrom in Deutschland unter transporttechnischen Gesichtspunkten : Vortrag
T2  - Rohstofftechnik im Wandel : 26./27. November 1998 ; Tagungsband / Rheinisch-Westfälische Technische Hochschule Aachen. Aachener Umwelttage der Fakultät für Bergbau, Hüttenwesen und Geowissenschaften
Y1  - 1998
SP  - V.1,1
EP  - V.1,21
ER  - 
TY  - CHAP
A1  - Becker, Jörg
A1  - Eggert, Mathias
A1  - Knackstedt, Ralf
T1  - Der Beitrag der Referenzmodellierung zur Compliance im Reporting des Finanzsektors
T2  - Business Intelligence Operational Structures: Towards the Design of a Reference Process Map
Y1  - 2010
N1  - Zweites Forschungskolloquium Business Intelligence (FKBI 10)
der GI-Fachgruppe Management Support Systems
in Zusammenarbeit mit dem Competence Center
for Business Intelligence an der Technischen Universität Dresden
am 17. und 18. September 2010
in Dresden
SP  - 11
EP  - 18
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Köllensperger, P.
A1  - De Doncker, R. W.
ED  - Dmowski, Antoni
T1  - Der Internally Commutated Thyristor (ICT) : ein neuartiger GCT mit integrierter Ausschalteinheit
T2  - "Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne
Y1  - 2007
SN  - 83-918709-7-9
SP  - 7.1
EP  - 7.9
PB  - APS Energia
CY  - Warszawa
ER  - 
TY  - CHAP
A1  - Späte, Frank
A1  - Hubrich, Jörg
A1  - Keip, Wolfgang
A1  - Meliß, Michael
T1  - Der Solar-Campus Jülich - Stand der Arbeiten
T2  - Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule Köln / 11. Internationales Sonnenforum
Y1  - 1998
SP  - 666
EP  - 672
PB  - Solar Promotion
CY  - München
ER  - 
TY  - CHAP
A1  - Göttsche, Joachim
T1  - Der vertikale Sonnenlichtquotient : eine wichtige Kenngröße zur Charakterisierung von Lichtlenksystemen
T2  - Elftes Symposium Innovative Lichttechnik in Gebäuden : 27./28. Januar 2005, Kloster Banz
Y1  - 2005
SN  - 3-934681-37-9
SP  - 79
EP  - 84
PB  - OTTI-Energie-Kolleg
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Schwarzer, Klemens
T1  - Desalination systems with renewable energies
T2  - DME Seminar Desalination and Renewable Energies : June 19 and 20 2008, Solar Institut Jülich / Deutsche Meerwasserentsalzung e.V.
Y1  - 2008
SN  - 978-3-86861-017-8
PB  - DME
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Rajan, Sreelakshmy
T1  - Design and construction techniques of AAC masonry buildings in earthquakes regions
T2  - 10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Hot S-Parameter Measurement System for Plasma and Magnetron Applications
T2  - 2020 German Microwave Conference (GeMiC), Cottbus, Germany, 2020
Y1  - 2020
SN  - 978-3-9820397-1-8
SP  - 124
EP  - 127
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - CHAP
A1  - Terstegge, Andreas
A1  - Weber, S.
A1  - Herzog, H.
A1  - Müller-Gärtner, H. W.
A1  - Halling, H.
T1  - Design and implementation aspects of a 3D reconstruction algorithm for the Jülich TierPET system
T2  - 1997 International Meeting on Fully ThreeDimensional Image Reconstruction in Radiology and Nuclear Medicine : 3D97
Y1  - 1997
SP  - 170
EP  - 173
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Soltau, N.
A1  - De Doncker, R. W.
A1  - Schmiegel, A.
T1  - Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - http://dx.doi.org/10.1109/ECCE.2010.5618220
SP  - 2944
EP  - 2949
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Gottschlich, J.
A1  - De Doncker, R. W.
T1  - Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure
T2  - 2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE & ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]
Y1  - 2011
SN  - 978-1-61284-958-4 (Print)
SN  - 978-1-61284-956-0 (Online)
U6  - http://dx.doi.org/10.1109/ICPE.2011.5944661
SP  - 1182
EP  - 1189
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Wurm, P.
T1  - Design concept and modeling of an advanced solar photon thruster
T2  - Advances in the Astronautical Sciences
N2  - The so-called "compound solar sail", also known as "Solar Photon Thruster" (SPT), holds the potential of providing significant performance advantages over the flat solar sail. Previous SPT design concepts, however, do not consider shadowing effects and multiple reflections of highly concentrated solar radiation that would inevitably destroy the gossamer sail film. In this paper, we propose a novel advanced SPT (ASPT) design concept that does not suffer from these oversimplifications. We present the equations that describe the thrust force acting on such a sail system and compare its performance with respect to the conventional flat solar sail.
KW  - solar sails
Y1  - 2009
SN  - 978-087703554-1
SN  - 00653438
N1  - 19th AAS/AIAA Space Flight Mechanics Meeting; Savannah, GA; United States; 8 February 2009 through 12 February 2009
SP  - 723
EP  - 740
PB  - American Astronautical Society
CY  - San Diego, Calif.
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Davrajh, Shaniel
A1  - Ferrein, Alexander
T1  - Design considerations of the duo fugam dual rotor UAV
T2  - 2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)
Y1  - 2017
SN  - 978-1-5386-2314-5
U6  - http://dx.doi.org/10.1109/RoboMech.2017.8261115
SP  - 7
EP  - 13
ER  - 
TY  - CHAP
A1  - Hirsch, G.
A1  - Wahle, Michael
ED  - Leadon, Bernhard M.
T1  - Design criteria for dynamic vibration absorbers with regard to the nonproportional damping
T2  - Proceedings / The Third US National Conference on Wind Engineering Research, February 26 - March 1, 1978, University of Florida, Gainesville
Y1  - 1978
N1  - NSF grant no. PFR77-10170 A01. -  US National Conference on Wind Engineering Research <3, 1978, Gainesville, Fla.>
SP  - 507
EP  - 510
PB  - Univ. of Florida, Div. of Continuing Education Publ.
CY  - Gainsville, Fla.
ER  - 
TY  - CHAP
A1  - Hardt, Arno
A1  - Abdel-Gawad, A
A1  - Martin, S.
A1  - Reich, J.
T1  - Design procedures for the Juelich QQDDQ high resolution spectrometer
T2  - Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975
Y1  - 1975
SP  - 45
EP  - 51
ER  - 
TY  - CHAP
A1  - Czarnecki, Christian
ED  - Mayr, Heinrich C.
ED  - Pinzger, Martin
ED  - Gesellschaft für Informatik e. V. (GI), 
T1  - Design und Nutzung einer industriespezifischen Referenzarchitektur für die Telekommunikationsindustrie
T2  - GI Edition Proceedings Band 259 INFORMATIK 2016. 26.-30. September 2016 Klagenfurt
N2  - Zur Unterstützung des Transformationsbedarfs von Telekommunikationsunternehmen sind die Referenzmodelle des TM Forums in der Praxis weltweit anerkannt. Dabei findet jedoch meist eine losgelöste Nutzung für spezifische Einzelthemen statt. Daher führt dieser Artikel die bestehenden Inhalte in einer industriespezifischen, übergreifenden Referenzarchitektur zusammen. Der Fokus liegt auf den Ebenen Aufbauorganisation, Prozesse, Applikationen und Daten. Darüber hinaus werden inhaltliche Architekturdomänen zur Strukturierung angeboten. Die Referenzarchitektur ist hierarchisch aufgebaut und wird hier beispielhaft für ausgewählte, aggregierte Inhalte beschrieben. Als erste Evaluation wird die Anwendung der Referenzarchitektur in drei Praxisprojekten erläutert.
KW  - Referenzmodellierung
KW  - Unternehmensarchitektur
KW  - Unternehmenstransformation
KW  - TM Forum
KW  - enhanced Telecom Operations Map (eTOM)
Y1  - 2016
SN  - 9783885796534
SN  - 1617-5468
SP  - 807
EP  - 814
PB  - Köllen
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Ostkotte, Sebastian
A1  - Peters, Constantin
A1  - Hüning, Felix
A1  - Bragard, Michael
T1  - Design, implementation and verification of an rotational incremental position encoder based on the magnetic Wiegand effect
T2  - 2022 ELEKTRO (ELEKTRO)
N2  - This paper covers the use of the magnetic Wiegand effect to design an innovative incremental encoder. First, a theoretical design is given, followed by an estimation of the achievable accuracy and an optimization in open-loop operation.
Finally, a successful experimental verification is presented. For this purpose, a permanent magnet synchronous machine is controlled in a field-oriented manner, using the angle information of the prototype.
KW  - Position Encoder
KW  - Rotational Encoder
KW  - Wiegand Effect
KW  - Angle Sensor
KW  - Incremental Encoder
Y1  - 2022
SN  - 978-1-6654-6726-1
SN  - 978-1-6654-6727-8
U6  - http://dx.doi.org/10.1109/ELEKTRO53996.2022.9803477
SN  - 2691-0616
N1  - 2022 ELEKTRO (ELEKTRO), 23-26 Mai 2022, Krakow, Poland.
PB  - IEEE
ER  -