TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
T1  - Damage reduction system for masonry infill walls under seismic loading
T2  - ce/papers
N2  - Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.
KW  - earthquakes
KW  - in-plane and out-of-plane failure
KW  - INODIS
KW  - RC frames
Y1  - 2018
U6  - http://dx.doi.org/10.1002/cepa.863
N1  - Special Issue: ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete
VL  - 2
IS  - 4
SP  - 267
EP  - 273
PB  - Ernst & Sohn Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Dielmann, Klaus-Peter
T1  - Darstellung des Erneuerbaren Energiegesetzes (EEG) und dessen Auswirkungen
N2  - Erneuerbares Energien-Gesetz: Anwendungsbereich, Abnahme- und Vergütungspflicht, Vergütungssätze, Netzkosten, Ausgleichsregelungen Auswirkungen des EEG: Photovoltaik, Windkraft, Biomasse, Wasserkraft, Klär-, Deponie- und Grubengas, Geothermie Zusammenfassung und Ausblick
KW  - Energierecht
KW  - Erneuerbares Energiengesetz
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Göttsche, Joachim
T1  - Das Gebäude-Armaturenbrett (GAB) - ein hochauflösendes Monitoring-Tool für Verbrauchsdaten in Privathaushalten
T2  - Energieeffizienz + Bestand : energetische Sanierung von Gebäuden ; internationales Anwenderforum ; 14./15. Februar 2008, Kloster Banz, Bad Staffelstein
Y1  - 2008
SN  - 978-3-934681-68-2
SP  - 216
EP  - 223
PB  - OTTI
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Fissabre, Anke
A1  - Schmidt, Klaus
A1  - Sonnleitner, Andrea
T1  - Das Lehnsmühlschloß in Ortrand – ein sächsisches Herrenhaus der Renaissance
T2  - Wandel im Wohnbau zwischen Gotik und Barock : die sächsisch-böhmische Entwicklung im überregionalen Vergleich
Y1  - 2012
SN  - 978-3-89445-390-9
N1  - Jahrbuch für Hausforschung ; 53
SP  - 487
EP  - 501
PB  - Jonas
CY  - Marburg
ER  - 
TY  - CHAP
A1  - Schmiegel, A.
A1  - Koch, K.
A1  - Dittmer, M.
A1  - Braun, M.
A1  - Landau, M.
A1  - Dick, C.
A1  - Bragard, Michael
A1  - [u.a.], 
T1  - Das Sol-ion System : ein System zur Optimierung des Eigenverbrauchs von PV-Strom
T2  - Photovoltaische Solarenergie : 25. Symposium ; 03. - 05. März 2010, Kloster Banz, Bad Staffelstein. - (Wissen für Profis)
Y1  - 2010
SN  - 978-3-941785-23-6
SP  - 354
EP  - 359
PB  - OTTI, Ostbayerisches Technologie-Transfer-Inst.
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Becker, Jörg
A1  - Eggert, Mathias
A1  - Fleischer, Stefan
A1  - Heddier, Marcel
A1  - Knackstedt, Ralf
T1  - Data Warehouse Design and Legal Visualization – The Applicability of H2 for Reporting
T2  - Proceedings of the 23rd Australasian Conference on Information Systems 2012
Y1  - 2012
N1  - Australasian Conference on Information Systems (23rd : 2012 : Geelong, Victoria)
ER  - 
TY  - CHAP
A1  - Stieglitz, Kristian
A1  - Wollert, Jörg
T1  - Database driven modernization and expansion of storage systems
T2  - Proceedings : the 3rd International Multi-Conference on Engineering and Technological Innovation : June 29th - July 2nd, 2010, Orlando, Florida, USA ; vol. 2
Y1  - 2010
SN  - 978-1-936338-03-0
SP  - 180
EP  - 183
PB  - IIIS
CY  - Winter Garden, Fla.
ER  - 
TY  - CHAP
A1  - Weber, Niklas
A1  - Wolf, Martin
ED  - Barton, Thomas
T1  - Datenerhebung für die CDG-Forschung
T2  - Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)
Y1  - 2017
SN  - 978-3-944330-56-3
SP  - 218
EP  - 227
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Golland, Alexander
ED  - Ochs, Carsten
ED  - Friedewald, Michael
ED  - Hess, Thomas
ED  - Lamla, Jörn
T1  - Datenschutzregulierung als Eingriff in Wertschöpfungsmodelle
T2  - Die Zukunft der Datenökonomie : zwischen Geschäftsmodell, Kollektivgut und Verbraucherschutz
N2  - Das Kopplungsverbot verbietet, die Nutzung einer Dienstleistung von der Erteilung einer nicht für die Leistungserbringung erforderlichen Einwilligung abhängig zu machen. Personalisierte Werbung wird hierdurch erheblich erschwert. Anbieter können jedoch durch Bereitstellung eines alternativen, einwilligungsfreien Zugangs zu derselben Leistung ihren Dienst datenschutzkonform anbieten. Ein solcher Zugang muss nicht zwingend in Form eines fixen Entgelts gestaltet sein. Vielmehr ist es datenschutzrechtlich in gewissem Umfang zulässig, Preise unter Einbeziehung personenbezogener Daten dynamisch zu gestalten.
KW  - Informationsgesellschaft
KW  - Internetökonomie
KW  - Digitalisierung
KW  - Geschäftsmodell
KW  - Open Data
Y1  - 2019
SN  - 978-3-658-27510-5
N1  - Konferenz: Zukunft der Datenökonomie 2018,
11.10-12.10.2018.
Bayerische Akademie der Wissenschaften, München, Deutschland
SP  - 45
EP  - 68
PB  - Springer Fachmedien
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Kuperjans, Isabel
ED  - Bourg, Dominique
ED  - Erkman, Suren
T1  - Decision-support-system for technical, economical and ecological design and evaluation of industrial energy systems
T2  - Industrial ecology and sustainability : conferences and workshops ; September 22 - 25, 1999, Troyes, France
Y1  - 2000
PB  - Université de technologie de Troyes Genève : Institute for communication and analysis of science and technology
CY  - [Troyes]
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Linguistic Terms in Golog
T2  - FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0074-1424-4
SN  - 1613-0073
ER  - 
TY  - CHAP
A1  - Schulte-Tigges, Joschua
A1  - Matheis, Dominik
A1  - Reke, Michael
A1  - Walter, Thomas
A1  - Kaszner, Daniel
ED  - Krömker, Heidi
T1  - Demonstrating a V2X enabled system for transition of control and minimum risk manoeuvre when leaving the operational design domain
T2  - HCII 2023: HCI in Mobility, Transport, and Automotive Systems
N2  - Modern implementations of driver assistance systems are evolving from a pure driver assistance to a independently acting automation system. Still these systems are not covering the full vehicle usage range, also called operational design domain, which require the human driver as fall-back mechanism. Transition of control and potential minimum risk manoeuvres are currently research topics and will bridge the gap until full autonomous vehicles are available. The authors showed in a demonstration that the transition of control mechanisms can be further improved by usage of communication technology. Receiving the incident type and position information by usage of standardised vehicle to everything (V2X) messages can improve the driver safety and comfort level. The connected and automated vehicle’s software framework can take this information to plan areas where the driver should take back control by initiating a transition of control which can be followed by a minimum risk manoeuvre in case of an unresponsive driver. This transition of control has been implemented in a test vehicle and was presented to the public during the IEEE IV2022 (IEEE Intelligent Vehicle Symposium) in Aachen, Germany.
KW  - V2X
KW  - Transiton of Control
KW  - Minimum Risk Manoeuvre
KW  - Operational Design Domain
KW  - Connected Automated Vehicle
Y1  - 2023
SN  - 978-3-031-35677-3 (Print)
SN  - 978-3-031-35678-0 (Online)
U6  - http://dx.doi.org/10.1007/978-3-031-35678-0_12
N1  - 5th International Conference, MobiTAS 2023, Held as Part of the 25th HCI International Conference, HCII 2023, Copenhagen, Denmark, July 23–28, 2023.
SP  - 200
EP  - 210
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Mandelartz, Johannes
T1  - Der Aluminium-Sekundärstoffstrom in Deutschland unter transporttechnischen Gesichtspunkten : Vortrag
T2  - Rohstofftechnik im Wandel : 26./27. November 1998 ; Tagungsband / Rheinisch-Westfälische Technische Hochschule Aachen. Aachener Umwelttage der Fakultät für Bergbau, Hüttenwesen und Geowissenschaften
Y1  - 1998
SP  - V.1,1
EP  - V.1,21
ER  - 
TY  - CHAP
A1  - Becker, Jörg
A1  - Eggert, Mathias
A1  - Knackstedt, Ralf
T1  - Der Beitrag der Referenzmodellierung zur Compliance im Reporting des Finanzsektors
T2  - Business Intelligence Operational Structures: Towards the Design of a Reference Process Map
Y1  - 2010
N1  - Zweites Forschungskolloquium Business Intelligence (FKBI 10)
der GI-Fachgruppe Management Support Systems
in Zusammenarbeit mit dem Competence Center
for Business Intelligence an der Technischen Universität Dresden
am 17. und 18. September 2010
in Dresden
SP  - 11
EP  - 18
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Köllensperger, P.
A1  - De Doncker, R. W.
ED  - Dmowski, Antoni
T1  - Der Internally Commutated Thyristor (ICT) : ein neuartiger GCT mit integrierter Ausschalteinheit
T2  - "Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne
Y1  - 2007
SN  - 83-918709-7-9
SP  - 7.1
EP  - 7.9
PB  - APS Energia
CY  - Warszawa
ER  - 
TY  - CHAP
A1  - Späte, Frank
A1  - Hubrich, Jörg
A1  - Keip, Wolfgang
A1  - Meliß, Michael
T1  - Der Solar-Campus Jülich - Stand der Arbeiten
T2  - Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule Köln / 11. Internationales Sonnenforum
Y1  - 1998
SP  - 666
EP  - 672
PB  - Solar Promotion
CY  - München
ER  - 
TY  - CHAP
A1  - Göttsche, Joachim
T1  - Der vertikale Sonnenlichtquotient : eine wichtige Kenngröße zur Charakterisierung von Lichtlenksystemen
T2  - Elftes Symposium Innovative Lichttechnik in Gebäuden : 27./28. Januar 2005, Kloster Banz
Y1  - 2005
SN  - 3-934681-37-9
SP  - 79
EP  - 84
PB  - OTTI-Energie-Kolleg
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Schwarzer, Klemens
T1  - Desalination systems with renewable energies
T2  - DME Seminar Desalination and Renewable Energies : June 19 and 20 2008, Solar Institut Jülich / Deutsche Meerwasserentsalzung e.V.
Y1  - 2008
SN  - 978-3-86861-017-8
PB  - DME
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Rajan, Sreelakshmy
T1  - Design and construction techniques of AAC masonry buildings in earthquakes regions
T2  - 10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Hot S-Parameter Measurement System for Plasma and Magnetron Applications
T2  - 2020 German Microwave Conference (GeMiC), Cottbus, Germany, 2020
Y1  - 2020
SN  - 978-3-9820397-1-8
SP  - 124
EP  - 127
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - CHAP
A1  - Terstegge, Andreas
A1  - Weber, S.
A1  - Herzog, H.
A1  - Müller-Gärtner, H. W.
A1  - Halling, H.
T1  - Design and implementation aspects of a 3D reconstruction algorithm for the Jülich TierPET system
T2  - 1997 International Meeting on Fully ThreeDimensional Image Reconstruction in Radiology and Nuclear Medicine : 3D97
Y1  - 1997
SP  - 170
EP  - 173
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Soltau, N.
A1  - De Doncker, R. W.
A1  - Schmiegel, A.
T1  - Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - http://dx.doi.org/10.1109/ECCE.2010.5618220
SP  - 2944
EP  - 2949
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Gottschlich, J.
A1  - De Doncker, R. W.
T1  - Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure
T2  - 2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE & ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]
Y1  - 2011
SN  - 978-1-61284-958-4 (Print)
SN  - 978-1-61284-956-0 (Online)
U6  - http://dx.doi.org/10.1109/ICPE.2011.5944661
SP  - 1182
EP  - 1189
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Wurm, P.
T1  - Design concept and modeling of an advanced solar photon thruster
T2  - Advances in the Astronautical Sciences
N2  - The so-called "compound solar sail", also known as "Solar Photon Thruster" (SPT), holds the potential of providing significant performance advantages over the flat solar sail. Previous SPT design concepts, however, do not consider shadowing effects and multiple reflections of highly concentrated solar radiation that would inevitably destroy the gossamer sail film. In this paper, we propose a novel advanced SPT (ASPT) design concept that does not suffer from these oversimplifications. We present the equations that describe the thrust force acting on such a sail system and compare its performance with respect to the conventional flat solar sail.
KW  - solar sails
Y1  - 2009
SN  - 978-087703554-1
SN  - 00653438
N1  - 19th AAS/AIAA Space Flight Mechanics Meeting; Savannah, GA; United States; 8 February 2009 through 12 February 2009
SP  - 723
EP  - 740
PB  - American Astronautical Society
CY  - San Diego, Calif.
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Davrajh, Shaniel
A1  - Ferrein, Alexander
T1  - Design considerations of the duo fugam dual rotor UAV
T2  - 2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)
Y1  - 2017
SN  - 978-1-5386-2314-5
U6  - http://dx.doi.org/10.1109/RoboMech.2017.8261115
SP  - 7
EP  - 13
ER  - 
TY  - CHAP
A1  - Hirsch, G.
A1  - Wahle, Michael
ED  - Leadon, Bernhard M.
T1  - Design criteria for dynamic vibration absorbers with regard to the nonproportional damping
T2  - Proceedings / The Third US National Conference on Wind Engineering Research, February 26 - March 1, 1978, University of Florida, Gainesville
Y1  - 1978
N1  - NSF grant no. PFR77-10170 A01. -  US National Conference on Wind Engineering Research <3, 1978, Gainesville, Fla.>
SP  - 507
EP  - 510
PB  - Univ. of Florida, Div. of Continuing Education Publ.
CY  - Gainsville, Fla.
ER  - 
TY  - CHAP
A1  - Hardt, Arno
A1  - Abdel-Gawad, A
A1  - Martin, S.
A1  - Reich, J.
T1  - Design procedures for the Juelich QQDDQ high resolution spectrometer
T2  - Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975
Y1  - 1975
SP  - 45
EP  - 51
ER  - 
TY  - CHAP
A1  - Czarnecki, Christian
ED  - Mayr, Heinrich C.
ED  - Pinzger, Martin
ED  - Gesellschaft für Informatik e. V. (GI), 
T1  - Design und Nutzung einer industriespezifischen Referenzarchitektur für die Telekommunikationsindustrie
T2  - GI Edition Proceedings Band 259 INFORMATIK 2016. 26.-30. September 2016 Klagenfurt
N2  - Zur Unterstützung des Transformationsbedarfs von Telekommunikationsunternehmen sind die Referenzmodelle des TM Forums in der Praxis weltweit anerkannt. Dabei findet jedoch meist eine losgelöste Nutzung für spezifische Einzelthemen statt. Daher führt dieser Artikel die bestehenden Inhalte in einer industriespezifischen, übergreifenden Referenzarchitektur zusammen. Der Fokus liegt auf den Ebenen Aufbauorganisation, Prozesse, Applikationen und Daten. Darüber hinaus werden inhaltliche Architekturdomänen zur Strukturierung angeboten. Die Referenzarchitektur ist hierarchisch aufgebaut und wird hier beispielhaft für ausgewählte, aggregierte Inhalte beschrieben. Als erste Evaluation wird die Anwendung der Referenzarchitektur in drei Praxisprojekten erläutert.
KW  - Referenzmodellierung
KW  - Unternehmensarchitektur
KW  - Unternehmenstransformation
KW  - TM Forum
KW  - enhanced Telecom Operations Map (eTOM)
Y1  - 2016
SN  - 9783885796534
SN  - 1617-5468
SP  - 807
EP  - 814
PB  - Köllen
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Ostkotte, Sebastian
A1  - Peters, Constantin
A1  - Hüning, Felix
A1  - Bragard, Michael
T1  - Design, implementation and verification of an rotational incremental position encoder based on the magnetic Wiegand effect
T2  - 2022 ELEKTRO (ELEKTRO)
N2  - This paper covers the use of the magnetic Wiegand effect to design an innovative incremental encoder. First, a theoretical design is given, followed by an estimation of the achievable accuracy and an optimization in open-loop operation.
Finally, a successful experimental verification is presented. For this purpose, a permanent magnet synchronous machine is controlled in a field-oriented manner, using the angle information of the prototype.
KW  - Position Encoder
KW  - Rotational Encoder
KW  - Wiegand Effect
KW  - Angle Sensor
KW  - Incremental Encoder
Y1  - 2022
SN  - 978-1-6654-6726-1
SN  - 978-1-6654-6727-8
U6  - http://dx.doi.org/10.1109/ELEKTRO53996.2022.9803477
SN  - 2691-0616
N1  - 2022 ELEKTRO (ELEKTRO), 23-26 Mai 2022, Krakow, Poland.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Vitting, Eva
T1  - Designprojekte zu Solarenergie: Wie kommunizieren wir unsere Technik?
T2  - Forschung und Entwicklung für solarthermische Kraftwerke : 14. Kölner Sonnenkolloquium Mittwoch, 13. Juli 2011, im Auditorium des Campus Jülich der FH Aachen : Kurzfassungen der Vorträge und Poster
Y1  - 2011
SP  - 3 S.
PB  - DLR
CY  - Köln
ER  - 
TY  - CHAP
A1  - Rochefort, E. de
A1  - Verver, M.
A1  - Grunendahl, A.
A1  - Mooi, H.
A1  - Butenweg, Christoph
T1  - Detailed modelling of the lumbar spine for investigation of low back pain
T2  - Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)
Y1  - 2005
U6  - http://dx.doi.org/10.4271/2005-01-2716
SN  - 0096-736X
SP  - 1
EP  - 11
PB  - SAE International
CY  - Warrendale, Pa.
ER  - 
TY  - CHAP
A1  - Molinnus, Denise
A1  - Hardt, Gabriel
A1  - Käver, Larissa
A1  - Willenberg, Holger S.
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Detection of Adrenaline Based on Bioelectrocatalytical System to Support Tumor Diagnostic Technology
T2  - MDPI Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.3390/proceedings1040506
ER  - 
TY  - CHAP
A1  - Takenaga, Shoko
A1  - Herrera, Cony F.
A1  - Werner, Frederik
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
A1  - Öhlschläger, Peter
A1  - Wagner, Torsten
T1  - Detection of the metabolic activity of cells by differential measurements based on a single light-addressable potentiometric sensor chip
T2  - 11. Dresdner Sensor-Symposium : 9.-11.12.2013
Y1  - 2013
SN  - 978-3-9813484-5-3
SP  - 63
EP  - 67
ER  - 
TY  - CHAP
A1  - Bohrn, Ulrich
A1  - Mucha, Andreas
A1  - Werner, Frederik
A1  - Stütz, Evamaria
A1  - Bäcker, Matthias
A1  - Krumbe, Christoph
A1  - Schienle, Meinrad
A1  - Fleischer, Maximilian
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Detection of toxic chromium species in water using cellbased sensor systems
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - http://dx.doi.org/10.5162/IMCS2012/P2.1.14
SP  - 1364
EP  - 1367
ER  - 
TY  - CHAP
A1  - Hartmann, Axel
A1  - Kallweit, Stephan
A1  - Feldusen, Antje
A1  - Schröder, Wolfgang
T1  - Detection of upstream propagating sound waves at buffet flow using high-speed PIV
BT  - 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics ; 9th to 12th July 2012 Lisbon, Portugal
Y1  - 2012
N1  - Aerodynamisches Institut <Aachen> ; International Symposium on Applications of Laser Techniques to Fluid Mechanics <16, 2012, Lissabon>
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Determination of flow induced nonlinear vibrations of prestressed heat exchanger tubes
T2  - Advanced Course in Heat Exchangers : Theory and Practice ; ICHMT Symposium ; Dubrovnik, Croatia 1981. - (ICHMT digital library online ; 19)
Y1  - 1983
SP  - 339
EP  - 353
PB  - Begell House
CY  - Redding, Connecticut
ER  - 
TY  - CHAP
A1  - Tischbein, Franziska
A1  - Kean, Kilian
A1  - Vertgewall, Chris Martin
A1  - Ulbig, Andreas
A1  - Altherr, Lena
T1  - Determination of the topology of low-voltage distribution grids using cluster methods
T2  - 27th International Conference on Electricity Distribution (CIRED 2023)
N2  - Due to the decarbonization of the energy sector, the electric distribution grids are undergoing a major transformation, which is expected to increase the load on the operating resources due to new electrical loads and distributed energy resources. Therefore, grid operators need to gradually move to active grid management in order to ensure safe and reliable grid operation. However, this requires knowledge of key grid variables, such as node voltages, which is why the mass integration of measurement technology (smart meters) is necessary. Another problem is the fact that a large part of the topology of the distribution grids is not sufficiently digitized and models are partly faulty, which means that active grid operation management today has to be carried out largely blindly. It is therefore part of current research to develop methods for determining unknown grid topologies based on measurement data. In this paper, different clustering algorithms are presented and their performance of topology detection of low voltage grids is compared. Furthermore, the influence of measurement uncertainties is investigated in the form of a sensitivity analysis.
Y1  - 2023
SN  - 978-1-83953-855-1
U6  - http://dx.doi.org/10.1049/icp.2023.0478
N1  - 27th International Conference on Electricity Distribution (CIRED 2023), 12-15 June 2023, Rome, Italy.
SP  - 1
EP  - 5
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Schleupen, Josef
A1  - Engemann, Heiko
A1  - Bagheri, Mohsen
A1  - Kallweit, Stephan
A1  - Dahmann, Peter
T1  - Developing a climbing maintenance robot for tower and rotor blade service of wind turbines
T2  - Advances in Robot Design and Intelligent Control : Proceedings of the 25th Conference on Robotics in Alpe-Adria-Danube Region (RAAD16)
Y1  - 2017
SN  - 978-3-319-49058-8
U6  - http://dx.doi.org/10.1007/978-3-319-49058-8_34
N1  - Advances in Robot Design and Intelligent Control ; Vol. 540
SP  - 310
EP  - 319
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Hendrick, P.
A1  - Recker, E.
A1  - Elsing, R.
ED  - DeLuca, Luigi T.
T1  - Development and integration of a scalable low NOx combustion chamber for a hydrogen fuelled aero gas turbine
T2  - Progress in Propulsion Physics. - Vol. 4
Y1  - 2013
SN  - 978-2-7598-0876-2
U6  - http://dx.doi.org/10.1051/eucass/201304357
N1  - 4th European Conference for Aero-Space Sciences : July 4 - 8, 2011, St Petersburg, Russia ; EUCASS <4, 2011, St. Petersburg>
SP  - 357
EP  - 372
PB  - EDP Sciences
CY  - [Les Ulis]
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Kruse, Thomas
A1  - Wollert, Jörg
T1  - Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4
T2  - 12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece
Y1  - 2007
SN  - 1424408261 ; 9781424408269
U6  - http://dx.doi.org/10.1109/EFTA.2007.4416769
SP  - 177
EP  - 186
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - Development and Testing of a FuelFlex Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications With Variable Hydrogen Methane Mixtures
T2  - ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition.  June 17–21, 2019 Phoenix, Arizona, USA. Volume 4A: Combustion, Fuels, and Emissions
Y1  - 2019
SN  - 978-0-7918-5861-5
U6  - http://dx.doi.org/10.1115/GT2019-90095
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Development and Testing of a Low NOx Micromix Combustion Chamber for an Industrial Gas Turbine
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0092
SP  - 131
EP  - 140
ER  - 
TY  - CHAP
A1  - Anthrakidis, Anette
A1  - Herrmann, Ulf
A1  - Schorn, Christian
A1  - Schwarzer, Klemens
A1  - Wedding, Philipp
A1  - Weis, Fabian
T1  - Development and Testing of a Novel Method for the Determination of the Efficiency of Concentrating Solar Thermal Collectors
T2  - Conference Proceedings Solar World Congress 2015, Daegu, Korea, 08 – 12 November 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Schneider, Oliver
A1  - Al Hakim, Taher
A1  - Kayser, Peter
A1  - Digel, Ilya
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Development and trials of a test chamber for ultrasound-assisted sampling of living cells from solid surfaces
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 96
EP  - 97
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Buck, R.
A1  - Wurmhöringer, K.
A1  - Lehle, R.
A1  - Pfahl, A.
A1  - Göttsche, Joachim
A1  - Meyr, T.
T1  - Development of a 30m2 heliostat with hydraulic drive
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 74
EP  - 75
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Schopen, Oliver
A1  - Kemper, Hans
A1  - Esch, Thomas
T1  - Development of a comparison methodology and evaluation matrix for electrically driven compressors in ICE and FC
T2  - Proceedings of the 1st UNITED – Southeast Asia Automotive Interest Group (SAIG) International Conference
N2  - In addition to electromobility and alternative drive systems, a focus is set on electrically driven compressors (EDC), with a high potential for increasing the efficiency of internal combustion engines (ICE) and fuel cells [01]. The primary objective is to increase the ICE torque, provided independently of the ICE speed by compressing the intake air and consequently the ICE filling level supported by the compressor. For operation independent from the ICE speed, the EDC compressor is decoupled from the turbine by using an electric compressor motor (CM) instead of the turbine. ICE performances can be increased by the use of EDC where individual compressor parameters are adapted to the respective application area [02] [03]. This task contains great challenges, increased by demands with regard to pollutant reduction while maintaining constant performance and reduced fuel consumption. The FH-Aachen is equipped with an EDC test bench which enables EDC-investigations in various configurations and operating modes. Characteristic properties of different compressors can be determined, which build the basis for a comparison methodology. Subject of this project is the development of a comparison methodology for EDC with an associated evaluation method and a defined overall evaluation method. For the application of this comparison methodology, corresponding series of measurements are carried out on the EDC test bench using an appropriate test device.
KW  - electro mobility
KW  - fuel cell
KW  - internal combustion engine
KW  - electrically driven compressors
Y1  - 2021
SN  - 978-3-902103-94-9
N1  - 1st UNITED-SAIG International Conference, 21-22 APR 2021, Chulalongkorn University, Thailand
SP  - 45
EP  - 46
PB  - FH Joanneum
CY  - Graz
ER  - 
TY  - CHAP
A1  - Caminos, Ricardo Alexander Chico
A1  - Schmitz, Pascal
A1  - Atti, Vikrama
A1  - Mahdi, Zahra
A1  - Teixeira Boura, Cristiano José
A1  - Sattler, Johannes Christoph
A1  - Herrmann, Ulf
A1  - Hilger, Patrick
A1  - Dieckmann, Simon
T1  - Development of a micro heliostat and optical qualification assessment with a 3D laser scanning method
T2  - SOLARPACES 2020
N2  - The Solar-Institut Jülich (SIJ) and the companies Hilger GmbH and Heliokon GmbH from Germany have developed a small-scale cost-effective heliostat, called “micro heliostat”. Micro heliostats can be deployed in small-scale concentrated solar power (CSP) plants to concentrate the sun's radiation for electricity generation, space or domestic water heating or industrial process heat. In contrast to conventional heliostats, the special feature of a micro heliostat is that it consists of dozens of parallel-moving, interconnected, rotatable mirror facets. The mirror facets array is fixed inside a box-shaped module and is protected from weathering and wind forces by a transparent glass cover. The choice of the building materials for the box, tracking mechanism and mirrors is largely dependent on the selected production process and the intended application of the micro heliostat. Special attention was paid to the material of the tracking mechanism as this has a direct influence on the accuracy of the micro heliostat. The choice of materials for the mirror support structure and the tracking mechanism is made in favor of plastic molded parts. A qualification assessment method has been developed by the SIJ in which a 3D laser scanner is used in combination with a coordinate measuring machine (CMM). For the validation of this assessment method, a single mirror facet was scanned and the slope deviation was computed.
KW  - Concentrated solar power
KW  - Electricity generation
KW  - Measuring instruments
KW  - Heliostats
KW  - Global change
Y1  - 2022
SN  - 978-0-7354-4195-8
U6  - http://dx.doi.org/10.1063/5.0086262
SN  - 1551-7616 (online)
SN  - 0094-243X (print)
N1  - 26th International Conference on Concentrating Solar Power and Chemical Energy Systems
28 September–2 October 2020
Freiburg, Germany
IS  - 2445 / 1
PB  - AIP conference proceedings / American Institute of Physics
CY  - Melville, NY
ER  - 
TY  - CHAP
A1  - Hering, T.
A1  - Ulber, Roland
A1  - Tippkötter, Nils
T1  - Development of a screening system for antimicrobial surfaces
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 129
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Hoffschmidt, Bernhard
A1  - Schwarzer, Klemens
A1  - Späte, Frank
A1  - Kötter, Jens
A1  - Ebert, Miriam
A1  - Sierck, Olaf
T1  - Development of a small modular parabolic trough collector
T2  - 13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain
Y1  - 2006
SN  - 8478345191
PB  - SolarPaces
CY  - [o.O.]
ER  - 
TY  - CHAP
A1  - Nursinski-Stolberg, André
A1  - Gangatharan, Kiritharan
A1  - Czarnecki, Christian
ED  - Mayr, Heinrich C.
ED  - Pinzger, Martin
T1  - Development of a subject-oriented reference process model for the telecommunications industry
T2  - GI Edition Proceedings Band 259 INFORMATIK 2016
N2  - Generally the usage of reference models can be structured top-down or bottom-up. The practical need of agile change and flexible organizational implementation requires a consistent mapping to an operational level. In this context, well-established reference process models are typically structured top-down. The subject-oriented Business Process Management (sBPM) offers a modeling concept that is structured bottom-up and concentrates on the process actors on an
operational level. This paper applies sBPM to the enhanced Telecom Operations Map (eTOM), a well-accepted reference process model in the telecommunications industry. The resulting design artifact is a concrete example for a combination of a bottom-up and top-down developed reference model. The results are evaluated and confirmed in practical context through the involvement of the industry body TMForum.
KW  - Subject-oriented Business Process Management
KW  - Reference Process Model
KW  - eTOM
KW  - Telecommunications Industry.
Y1  - 2016
SN  - 9783885796534
SN  - 1617-5468
N1  - 26.-30. September 2016, Klagenfurt.
SP  - 699
EP  - 712
PB  - Gesellschaft für Informatik e.V.
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Hunker, Jan
A1  - Jung, Alexander
A1  - Goßmann, Matthias
A1  - Linder, Peter
A1  - Staat, Manfred
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Development of a tool to analyze the conduction speed in microelectrode array measurements of cardiac tissue
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - The discovery of human induced pluripotent stem cells reprogrammed from somatic cells [1] and their ability to differentiate into cardiomyocytes (hiPSC-CMs) has provided a robust platform for drug screening [2]. Drug screenings are essential in the development of new components, particularly for evaluating the potential of drugs to induce life-threatening pro-arrhythmias. Between 1988 and 2009, 14 drugs have been removed from the market for this reason [3]. The microelectrode array (MEA) technique is a robust tool for drug screening as it detects the field potentials (FPs) for the entire cell culture. Furthermore, the propagation of the field potential can be examined on an electrode basis. To analyze MEA measurements in detail, we have developed an open-source tool.
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - http://dx.doi.org/10.17185/duepublico/48750
SP  - 7
EP  - 8
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Achenbach, Timm
A1  - Göttsche, Joachim
A1  - Kaufhold, O.
A1  - Hoffschmidt, Bernhard
T1  - Development of an edge module for open volumetric receiver for the use of the radiation at the receiver boundary region
T2  - SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain
Y1  - 2011
CY  - Granada
ER  - 
TY  - CHAP
A1  - Grund, Raphael M.
A1  - Altherr, Lena
ED  - Reiff-Stephan, Jörg
ED  - Jäkel, Jens
ED  - Schwarz, André
T1  - Development of an open source energy disaggregation tool for the home automation platform Home Assistant
T2  - Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel
N2  - In order to reduce energy consumption of homes, it is important to make transparent which devices consume how much energy. However, power consumption is often only monitored aggregated at the house energy meter. Disaggregating this power consumption into the contributions of individual devices can be achieved using Machine Learning. Our work aims at making state of the art disaggregation algorithms accessibe for users of the open source home automation platform Home Assistant.
KW  - Home Automation Platform
KW  - Home Assistant
KW  - Open Source
KW  - Machine Learning
KW  - Energy Disaggregation
Y1  - 2023
SN  - 978-3-910103-01-6
U6  - http://dx.doi.org/10.33968/2023.02
N1  - 19. AALE-Konferenz. Luxemburg, 08.03.-10.03.2023.
BTS Connected Buildings & Cities Luxemburg
(Tagungsband unter https://doi.org/10.33968/2023.01)
SP  - 11
EP  - 20
PB  - le-tex publishing services GmbH
CY  - Leipzig
ER  - 
TY  - CHAP
A1  - Teixeira Boura, Cristiano José
A1  - Niederwestberg, Stefan
A1  - McLeod, Jacqueline
A1  - Herrmann, Ulf
A1  - Hoffschmidt, Bernhard
T1  - Development of heat exchanger for high temperature energy storage with bulk materials
T2  - AIP Conference Proceedings
Y1  - 2016
U6  - http://dx.doi.org/10.1063/1.4949106
VL  - 1734
IS  - 1
SP  - 050008-1
EP  - 050008-7
ER  - 
TY  - CHAP
A1  - Sattler, Johannes Christoph
A1  - Schneider, Iesse Peer
A1  - Angele, Florian
A1  - Atti, Vikrama
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Development of heliostat field calibration methods: Theory and experimental test results
T2  - SolarPACES conference proceedings
N2  - In this work, three patent pending calibration methods for heliostat fields of central receiver systems (CRS) developed by the Solar-Institut Jülich (SIJ) of the FH Aachen University of Applied Sciences are presented. The calibration methods can either operate in a combined mode or in stand-alone mode. The first calibration method, method A, foresees that a camera matrix is placed into the receiver plane where it is subjected to concentrated solar irradiance during a measurement process. The second calibration method, method B, uses an unmanned aerial vehicle (UAV) such as a quadrocopter to automatically fly into the reflected solar irradiance cross-section of one or more heliostats (two variants of method B were tested). The third calibration method, method C, foresees a stereo central camera or multiple stereo cameras installed e.g. on the solar tower whereby the orientations of the heliostats are calculated from the location detection of spherical red markers attached to the heliostats. The most accurate method is method A which has a mean accuracy of 0.17 mrad. The mean accuracy of method B variant 1 is 1.36 mrad and of variant 2 is 1.73 mrad. Method C has a mean accuracy of 15.07 mrad. For method B there is great potential regarding improving the measurement accuracy. For method C the collected data was not sufficient for determining whether or not there is potential for improving the accuracy.
KW  - Heliostat Field Calibration
KW  - Unmanned aerial vehicle
KW  - UAV
KW  - Quadrocopter
KW  - Camera system
Y1  - 2024
U6  - http://dx.doi.org/10.52825/solarpaces.v1i.678
SN  - 2751-9899 (online)
N1  - 28th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27-30 September, Albuquerque, NM, USA
IS  - Vol. 1
PB  - TIB Open Publishing
CY  - Hannover
ER  - 
TY  - CHAP
A1  - Neumann, Hannah
A1  - Adam, Mario
A1  - Backes, Klaus
A1  - Börner, Martin
A1  - Clees, Tanja
A1  - Doetsch, Christian
A1  - Glaeser, Susanne
A1  - Herrmann, Ulf
A1  - May, Johanna
A1  - Rosenthal, Florian
A1  - Sauer, Dirk Uwe
A1  - Stadler, Ingo
T1  - Development of open educational resources for renewable energy and the energy transition process
T2  - ISES SWC 2021
N2  - The dissemination of knowledge about renewable energies is understood as a social task with the highest topicality. The transfer of teaching content on renewable energies into digital open educational resources offers the opportunity to significantly accelerate the implementation of the energy transition. Thus, in the here presented project six German universities create open educational resources for the energy transition. These materials are available to the public on the internet under a free license. So far there has been no publicly accessible, editable media that cover entire learning units about renewable energies extensively and in high technical quality. Thus, in this project, the content that remains up-to-date for a longer period is appropriately prepared in terms of media didactics. The materials enable lecturers to provide students with in-depth training about technologies for the energy transition. In a particular way, the created material is also suitable for making the general public knowledgeable about the energy transition with scientifically based material.
KW  - energy transition
KW  - renewable energies
KW  - open educational resources
KW  - dissemination
KW  - digitalization
Y1  - 2021
U6  - http://dx.doi.org/10.18086/swc.2021.47.03
N1  - ISES Solar World Congress, virtual conference 25-29 October 2021
PB  - International Solar Energy Society
CY  - Freiburg
ER  - 
TY  - CHAP
A1  - Milkova, Kristina
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Dumova-Jovanoska, Elena
T1  - Development of Seismic Vulnerability Curves for Region Specific Masonry Buildings
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 10522
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Adams, Moritz
A1  - Losekamm, Martin J.
A1  - Czupalla, Markus
T1  - Development of the Thermal Control System for the RadMap Telescope Experiment on the International Space Station
T2  - International Conference on Environmental Systems
Y1  - 2020
N1  - The proceedings for the 2020 International Conference on Environmental Systems, ICES-2020-179
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Tamaldin, Noreffendy
A1  - Mansor, Muhd Rizuan
A1  - Mat Yamin, Ahmad Kamal
A1  - Bin Abdollah, Mohd Fazli
A1  - Esch, Thomas
A1  - Tonoli, Andrea
A1  - Reisinger, Karl Heinz
A1  - Sprenger, Hanna
A1  - Razuli, Hisham
ED  - Bin Abdollah, Mohd Fadzli
ED  - Amiruddin, Hilmi
ED  - Singh, Amrik Singh Phuman
ED  - Munir, Fudhail Abdul
ED  - Ibrahim, Asriana
T1  - Development of UTeM United Future Fuel Design Training Center Under Erasmus+ United Program
T2  - Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia
N2  - The industrial revolution IR4.0 era have driven many states of the art technologies to be introduced especially in the automotive industry. The rapid development of automotive industries in Europe have created wide industry gap between European Union (EU) and developing countries such as in South-East Asia (SEA). Indulging this situation, FH Joanneum, Austria together with European partners from FH Aachen, Germany and Politecnico Di Torino, Italy is taking initiative to close the gap utilizing the Erasmus+ United grant from EU. A consortium was founded to engage with automotive technology transfer using the European  ramework to Malaysian, Indonesian and Thailand Higher Education Institutions (HEI) as well as automotive industries. This could be achieved by establishing Engineering Knowledge Transfer Unit (EKTU) in respective SEA institutions guided by the industry partners in their respective countries. This EKTU could offer updated, innovative, and high-quality training courses to increase graduate’s employability in higher education institutions and strengthen relations between HEI and the wider economic and social environment by addressing Universityindustry cooperation which is the regional priority for Asia. It is expected that, the Capacity Building Initiative would improve the quality of higher education and enhancing its relevance for the labor market and society in the SEA partners. The outcome of this project would greatly benefit the partners in strong and complementary partnership targeting the automotive industry and enhanced larger scale international cooperation between the European and SEA partners. It would also prepare the SEA HEI in sustainable partnership with Automotive industry in the region as a mean of income generation in the future.
KW  - Erasmus+ United
KW  - technology transfer
KW  - UTeM Engineering Knowledge Transfer Unit
KW  - Malaysian automotive industry
Y1  - 2022
SN  - 978-981-19-3178-9
SN  - 978-981-19-3179-6 (E-Book)
U6  - http://dx.doi.org/10.1007/978-981-19-3179-6_50
SN  - 2195-4356
N1  - The 7th International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2021) was organized by Universiti Teknikal Malaysia Melaka (UTeM), Malaysia, in association with the Universitas Sebelas Maret (UNS), Indonesia, on 23 November 2021.
SP  - 274
EP  - 278
PB  - Springer Nature
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Leise, Philipp
A1  - Breuer, Tim
A1  - Altherr, Lena
A1  - Pelz, Peter F.
T1  - Development, validation and assessment of a resilient pumping system
T2  - Proceedings of the Joint International Resilience Conference, JIRC2020
N2  - The development of resilient technical systems is a challenging task, as the system should adapt automatically to unknown disturbances and component failures. To evaluate different approaches for deriving resilient technical system designs, we developed a modular test rig that is based on a pumping system. On the basis of this example
system, we present metrics to quantify resilience and an algorithmic approach to improve resilience. This approach enables the pumping system to automatically react on unknown disturbances and to reduce the impact of component failures. In this case, the system is able to automatically adapt its topology by activating additional valves. This enables the system to still reach a minimum performance, even in case of failures. Furthermore, timedependent disturbances are evaluated continuously, deviations from the original state are automatically detected and anticipated in the future. This allows to reduce the impact of future disturbances and leads to a more resilient
system behaviour.
KW  - water supply system
KW  - fault detection
KW  - anticipation strategy
Y1  - 2020
SN  - 978-90-365-5095-6
N1  - Proceedings of the Joint International Resilience Conference 2020.
Interconnected: Resilience Innovations for Sustainable Development Goals. 23 - 27 November, 2020
SP  - 97
EP  - 100
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Kazari, Masahide
A1  - Okada, Kunio
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haji Ayed, Anis
T1  - Developments of Hydrogen Dry Low Emission Combustion Technology
T2  - Annual Congress of Gas Turbine Society Japan, 2015
Y1  - 2015
N1  - Abstract in engl.; Text in japanisch
ER  - 
TY  - CHAP
A1  - Tippkötter, Nils
A1  - Möhring, S.
A1  - Maurer, S.
A1  - Roth, J.
T1  - Dezentrale Vorbehandlung und Verarbeitung pflanzlicher Reststoffe für Bioraffinerien
T2  - Kurzfassungen der Vorträge nach Sessions : Frühjahrstagung der Biotechnologen 2013, 4. - 5. März 2013, Dechema-Haus, Frankfurt am Main
Y1  - 2013
SP  - 5
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Goldbach, Daniel
ED  - Wahl, Michael
T1  - Diagnosemaßnahmen im Umfeld der Funktionalen Sicherheit
T2  - AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beiträge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)
Y1  - 2014
SN  - 978-3-8007-3580-8
N1  - GMM-Fachbericht ; 78
SP  - 172
EP  - 179
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
T1  - Die Analyse industrieller funkgestützter Kommunikationskanäle
T2  - Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse & Kongress, 28. - 30. Nov. 2006, Nürnberg
Y1  - 2006
SN  - 9783800729944
SP  - 279
EP  - 288
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Meliß, Michael
A1  - Schwarzer, Klemens
A1  - Späte, F.
A1  - Neskakis, A.
A1  - Buck, H.
T1  - Die Arbeitsgemeinschaft Solar Nordrhein-Westfalen, Schwerpunkt B: Dezentrale Energietechnologien
T2  - Energie und unsere Umwelt. 8. Internationales Sonnenforum '92, 30. Juni - 3. Juli 1992. Bd. 2
Y1  - 1992
SP  - 1439
EP  - 1444
PB  - DGS-Sonnenenergie-Verl.
CY  - München
ER  - 
TY  - CHAP
A1  - Fissabre, Anke
T1  - Die Augsburger Dachterrassen der Renaissance
T2  - Lutherstadt Wittenberg, Torgau und der Hausbau im 16. Jahrhundert : Bericht über die Tagung des Arbeitskreises für Hausforschung e.V. in der Lutherstadt Wittenberg vom 19.-13. Oktober 2011.
Y1  - 2015
SN  - 978-3-89445-517-0
N1  - Jahrbuch für Hausforschung ; 62
SP  - 571
EP  - 585
PB  - Jonas Verlag für Kunst und Literatur
CY  - Marburg
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Bettzieche, Volker
A1  - Kuhlmann, Wolfram
A1  - Meskouris, Konstantin
T1  - Die baudynamische Beurteilung von Talsperren am Beispiel der Fürwiggetalsperre
T2  - Berichte der Fachtagung Baustatik - Baupraxis 9 am 14. und 15. März 2005 in Dresden / Institut für Statik und Dynamik der Tragwerke, TU Dresden, Deutschland
Y1  - 2005
SN  - 3-00-015456-6
SP  - 73
EP  - 84
PB  - Inst. für Statik und Dynamik der Tragwerke
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
ED  - König-Ries, Brigitta
T1  - Die benutzerzentrierte Entwicklung mobiler Unternehmenssoftware
T2  - MMS 2007: Mobilität und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany
Y1  - 2007
SN  - 978-3-88579-198-0
SP  - 23
EP  - 35
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Donner, Ralf
A1  - Rabel, Matthias
A1  - Scholl, Ingrid
A1  - Ferrein, Alexander
A1  - Donner, Marc
A1  - Geier, Andreas
A1  - John, André
A1  - Köhler, Christian
A1  - Varga, Sebastian
T1  - Die Extraktion bergbaulich relevanter Merkmale aus 3D-Punktwolken eines untertagetauglichen mobilen Multisensorsystems
T2  - Tagungsband Geomonitoring
Y1  - 2019
U6  - http://dx.doi.org/10.15488/4515
SP  - 91
EP  - 110
ER  - 
TY  - CHAP
A1  - Kern, Alexander
T1  - Die neue DIN EN 62305-2 (VDE 0185-305-2) Ed.2:2013-02 - Änderungen zur Ed.l und zugehörige Beiblätter
T2  - 10. VDE, VBB-Blitzschutztagung : Vorträge der 10. VDE, ABB-Fachtagung vom 24. bis 25. Oktober 2013 in Neu-Ulm. (VDE-Fachbericht ; 70)
Y1  - 2013
SN  - 978-3-8007-3540-2
SP  - 9
EP  - 16
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Röth, Thilo
A1  - Stark, R.
T1  - Die Rolle der virtuellen Produktentstehung bei der Integration von Karosseriesystemen
T2  - Karosseriekongress Systemintegration in der Karosserietechnik : 17. und 18. März 2009 in Baden-Baden / Kongressleitung: Reiner Stark
Y1  - 2009
SN  - 978-3-9812624-4-5
N1  - Karosseriekongress ; (2009.03.17-18 : ; Baden-Baden)
PB  - VDI-Wissensforum
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Droszez, Anna
A1  - Sanno, Maximilian
A1  - Goldmann, Jan-Peter
A1  - Albracht, Kirsten
A1  - Brüggemann, Gerd-Peter
A1  - Braunstein, Bjoern
T1  - Differences between take-off behavior during vertical jumps and two artistic elements
T2  - 34th International Conference of Biomechanics in Sport, Tsukuba, Japan, July 18-22, 2016
Y1  - 2016
SN  - 1999-4168
SP  - 577
EP  - 580
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Döring, Bernd
A1  - Frauenrath, Tobias
A1  - Groß, Rolf
A1  - Mohan, Nijanthan
A1  - Oyen, Marc
A1  - Schnittcher, Lukas
A1  - Voß, Norbert
ED  - Reiff-Stephan, Jörg
ED  - Jäkel, Jens
ED  - Schwarz, André
T1  - DiggiTwin: ein interdisziplinäres Projekt zur Nutzung digitaler Zwillinge auf dem Weg zu einem klimaneutralen Gebäudebestand
T2  - Tagungsband AALE 2024 : Fit für die Zukunft: praktische Lösungen für die industrielle Automation
N2  - Im Hinblick auf die Klimaziele der Bundesrepublik Deutschland konzentriert sich das Projekt Diggi Twin auf die nachhaltige Gebäudeoptimierung. Grundlage für eine ganzheitliche Gebäudeüberwachung und -optimierung bildet dabei die Digitalisierung und Automation im Sinne eines Smart Buildings. Das interdisziplinäre Projekt der FH Aachen hat das Ziel, ein bestehendes Hochschulgebäude und einen Neubau an klimaneutrale Standards anzupassen. Im Rahmen des Projekts werden bekannte Verfahren, wie das Building Information Modeling (BIM), so erweitert, dass ein digitaler Gebäudezwilling entsteht. Dieser kann zur Optimierung des Gebäudebetriebs herangezogen werden, sowie als Basis für eine Erweiterung des Bewertungssystems Nachhaltiges Bauen (BNB) dienen. Mithilfe von Sensortechnologie und künstlicher Intelligenz kann so ein präzises Monitoring wichtiger Gebäudedaten erfolgen, um ungenutzte Energieeinsparpotenziale zu erkennen und zu nutzen. Das Projekt erforscht und setzt methodische Erkenntnisse zu BIM und digitalen Gebäudezwillingen praxisnah um, indem es spezifische Fragen zur Energie- und Ressourceneffizienz von Gebäuden untersucht und konkrete Lösungen für die Gebäudeoptimierung entwickelt.
KW  - Anomalieerkennung
KW  - IoT
KW  - Überwachung & Optimierung
KW  - DiggiTwin
KW  - BIM
KW  - Smart Building
KW  - Digitalisierung
Y1  - 2024
SN  - 978-3-910103-02-3
U6  - http://dx.doi.org/10.33968/2024.67
N1  - 20. AALE-Konferenz. Bielefeld, 06.03.-08.03.2024
(Tagungsband unter https://doi.org/10.33968/2024.29)
SP  - 341
EP  - 346
PB  - le-tex publishing services GmbH
CY  - Leipzig
ER  - 
TY  - CHAP
A1  - Neth, Jannik
A1  - Schuba, Marko
A1  - Brodkorb, Karsten
A1  - Neugebauer, Georg
A1  - Höner, Tim
A1  - Hack, Sacha
T1  - Digital forensics triage app for android
T2  - ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security
N2  - Digital forensics of smartphones is of utmost importance in many criminal cases. As modern smartphones store chats, photos, videos etc. that can be relevant for investigations and as they can have storage capacities of hundreds of gigabytes, they are a primary target for forensic investigators. However, it is exactly this large amount of data that is causing problems: extracting and examining the data from multiple phones seized in the context of a case is taking more and more time. This bears the risk of wasting a lot of time with irrelevant phones while there is not enough time left to analyze a phone which is worth examination. Forensic triage can help in this case: Such a triage is a preselection step based on a subset of data and is performed before fully extracting all the data from the smartphone. Triage can accelerate subsequent investigations and is especially useful in cases where time is essential. The aim of this paper is to determine which and how much data from an Android smartphone can be made directly accessible to the forensic investigator – without tedious investigations. For this purpose, an app has been developed that can be used with extremely limited storage of data in the handset and which outputs the extracted data immediately to the forensic workstation in a human- and machine-readable format.
KW  - Android
KW  - Digital triage
KW  - Triage-app
Y1  - 2023
SN  - 9798400707728
U6  - http://dx.doi.org/10.1145/3600160.3605017
N1  - ARES 2023: The 18th International Conference on Availability, Reliability and Security. August 29 - September 1, 2023. Benevento, Italy.
PB  - ACM
ER  - 
TY  - CHAP
A1  - Schulze-Buxloh, Lina
A1  - Groß, Rolf Fritz
A1  - Ulbrich, Michelle
T1  - Digital planning using building information modelling and virtual reality: new approach for students’ remote practical training under lockdown conditions in the course of smart building engineering
T2  - Proceedings of International Conference on Education in Mathematics, Science and Technology 2021
N2  - The worldwide Corona pandemic has severely restricted student projects in the higher semesters of engineering courses. In order not to delay the graduation, a new concept had to be developed for projects under lockdown conditions. Therefore, unused rooms at the university should be digitally recorded in order to develop a new usage concept as laboratory rooms. An inventory of the actual state of the rooms was done first by taking photos and listing up all flaws and peculiarities. After that, a digital site measuring was done with a 360° laser scanner and these recorded scans were linked to a coherent point cloud and transferred to a software for planning technical building services and supporting Building Information Modelling (BIM). In order to better illustrate the difference between the actual and target state, two virtual reality models were created for realistic demonstration. During the project, the students had to go through the entire digital planning phases. Technical specifications had to be complied with, as well as documentation, time planning and cost estimate. This project turned out to be an excellent alternative to on-site practical training under lockdown conditions and increased the students’ motivation to deal with complex technical questions.
KW  - smart building engineering
KW  - building information modelling
KW  - virtual reality
KW  - lockdown conditions
KW  - emote practical training
Y1  - 2021
SN  - 978-1-952092-17-6
N1  - April 1-4, 2021 in Antalya, Turkey.
SP  - 118
EP  - 123
PB  - ISTES Organization
CY  - San Antonio, TX
ER  - 
TY  - CHAP
A1  - Ulmer, Jessica
A1  - Mostafa, Youssef
A1  - Wollert, Jörg
T1  - Digital Twin Academy: From Zero to Hero through individual learning experiences
T2  - Tagungsband AALE 2022 / Herausgegeben von der Hochschule für Technik, Wirtschaft und Kultur Leipzig
N2  - Digital twins are seen as one of the key technologies of Industry 4.0. Although many research groups focus on digital twins and create meaningful outputs, the technology has not yet reached a broad application in the industry. The main reasons for this imbalance are the complexity of the topic, the lack of specialists, and the unawareness of the twin opportunities. The project "Digital Twin Academy" aims to overcome these barriers by focusing on three actions: Building a digital twin community for discussion and exchange, offering multi-stage training for various knowledge levels, and implementing realworld use cases for deeper insights and guidance. In this work, we focus on creating a flexible learning platform that allows the user to select a training path adjusted to personal knowledge and needs. Therefore, a mix of basic and advanced modules is created and expanded by individual feedback options. The usage of personas supports the selection of the appropriate modules.
KW  - Digital Twins
KW  - Knowledge Transfer
KW  - Training
Y1  - 2022
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bsz:l189-qucosa2-776097
SN  - 978-3-910103-00-9
N1  - Konferenz: 18. AALE-Konferenz. Pforzheim, 09.03.-11.03.2022

This cross-border research was conducted in frame of the Interreg Euregio Meuse-Rhine project Digital Twin Academy, funded by the European Regional Development Fund of the European Union.
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Pieper, Martin
T1  - Digitale Hochschullehre in mathematischen und mathematikdidaktischen Veranstaltungen
T2  - Beiträge zum Mathematikunterricht 2018 : Vorträge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft für Didaktik der Mathematik). Bd. 1
Y1  - 2018
SN  - 978-3-95987-089-4
SP  - 105
EP  - 106
PB  - WTM-Verlag
CY  - Münster
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Matthies, Hermann G.
A1  - Stavroulakis, Georgios Eleftherios
A1  - Staat, Manfred
T1  - Direct plastic structural design by chance constrained programming
T2  - 6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK
N2  - We propose a stochastic programming method to analyse limit and shakedown of structures under random strength with lognormal distribution. In this investigation a dual chance constrained programming algorithm is developed to calculate simultaneously both the upper and lower bounds of the plastic collapse limit or the shakedown limit. The edge-based smoothed finite element method (ES-FEM) using three-node linear triangular elements is used.
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Scholl, Ingrid
A1  - Suder, Sebastian
A1  - Schiffer, Stefan
T1  - Direct Volume Rendering in Virtual Reality
T2  - Bildverarbeitung für die Medizin 2018
Y1  - 2018
SN  - 978-3-662-56537-7
U6  - http://dx.doi.org/10.1007/978-3-662-56537-7_79
SP  - 297
EP  - 302
PB  - Springer Vieweg
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - DISMED - an innovation portal for printing and media industry
T2  - CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000
Y1  - 2001
N1  - Programmpunkt: Cybercafé.
PB  - CORDIS Archive
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - Displacement based design of masonry structures
T2  - Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...
Y1  - 2008
SN  - 978-19-2070-1-92-5
SP  - 1
EP  - 10
PB  - University of Newcastle
CY  - Callaghan
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Leicht-Scholten, Carmen
ED  - Tipurić, Darko
ED  - Hruška, Domagoj
T1  - Diversity- and innovation management in complex engineering organizations
T2  - 7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia
N2  - Diversity is increasingly being addressed as an innovation-promoting factor. For this reason, companies and institutions tackle the integration of a diversity management approach that enables a heterogenic perspective on innovation development. However, system-theoretical frameworks state that the implementation of diversity measures that are not tailored to the needs of the organization often leads to a rejection or reactivity with regard to the management approach. In this context, especially organizations, which are characterized by a specific hierarchical structure, a dominant habitus or specialist culture, must face the challenge of realizing a sustainable change of the corporate culture that sets the basis for implementing diversity management approaches. The presented research project focuses on analyzing the situation in a huge scientific collaborative project - so called Cluster of Excellence (CoE) - with the aim to implement a diversity - and innovation management strategy. Considering the influencing determinants, the CoE is characterized by its embeddedness in the scientific system, a complex organizational structure, and a high fluctuation rate. The paper presents a systemic approach of reflecting these factors in order to develop a diversity- and innovation management strategy. In this frame, the results of a quantitative survey of CoE employees and derived mindset-types are presented. The results show a need for taking different mindset-types into account, to be able to develop a tailored management strategy. The aim of the project is to give recommendations for developing a sustainable management concept that promotes both diversity and innovation by drawing on the persisting mindsets of organization members while reflecting top down as well as bottom up factors of implementation processes as well as the psychology of change. This paper addresses all who are concerned with the management of human resources in innovation processes and are striving for a cultural change within the framework of complex organizations.
KW  - Change Management
KW  - Corporate Culture
KW  - Diversity Management
KW  - Engineering
KW  - Innovation Management
Y1  - 2019
SP  - 136
EP  - 157
PB  - Governance Research and Development Centre (CIRU)
CY  - Zagreb
ER  - 
TY  - CHAP
A1  - Wu, Chunsheng
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - DNA-hybridization detection using light-addressable potentiometric sensor modified with gold layer
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Sattler, Johannes Christoph
A1  - Atti, Vikrama
A1  - Alexopoulos, Spiros
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
A1  - Dutta, Siddharth
A1  - Kioutsioukis, Ioannis
T1  - DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook
T2  - SolarPACES conference proceedings
N2  - This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut Jülich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 % based on the tested days. The result fulfils SIJ’s aim to achieve a reliability of around 70 %, but SIJ aims to still improve the DNI forecast quality.
KW  - Direct normal irradiance forecast
KW  - DNI forecast
KW  - Parabolic trough collector
KW  - PTC
KW  - Thermal Energy Storage
Y1  - 2024
U6  - http://dx.doi.org/10.52825/solarpaces.v1i.731
SN  - 2751-9899 (online)
N1  - 28th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27-30 September, Albuquerque, NM, USA
IS  - VOL. 1
PB  - TIB Open Publishing
CY  - Hannover
ER  - 
TY  - CHAP
A1  - Suryoputri, Nathania
A1  - Ghaderi, Aydin
A1  - Linder, Peter
A1  - Kotliar, Konstantin
A1  - Göttler, Jens
A1  - Sorg, Christian
A1  - Grimmer, Timo
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Does hemodynamic response function change in Alzheimer disease?
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 92
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Czarnecki, Christian
A1  - Dietze, Christian
ED  - Maedche, Alexander
ED  - vom Brocke, Jan
ED  - Hevner, Alan
T1  - Domain-Specific reference modeling in the telecommunications industry
T2  - DESRIST 2017: Designing the Digital Transformation
N2  - The telecommunications industry is currently going through a major transformation. In this context, the enhanced Telecom Operations Map (eTOM) is a domain-specific process reference model that is offered by the industry organization TM Forum. In practice, eTOM is well accepted and confirmed as de facto standard. It provides process definitions and process flows on different levels of detail. This article discusses the reference modeling of eTOM, i.e., the design, the resulting artifact, and its evaluation based on three project cases. The application of eTOM in three projects illustrates the design approach and concrete models on strategic and operational levels. The article follows the Design Science Research (DSR) paradigm. It contributes with concrete design artifacts to the transformational needs of the telecommunications industry and offers lessons-learned from a general DSR perspective.
KW  - enhanced Telecom Operations Map (eTOM)
KW  - Process reference model
KW  - Process design
KW  - Map (eTOM) Process reference model Process design Telecommunications industry
Y1  - 2017
SN  - 978-3-319-59144-5
SN  - 978-3-319-59143-8
U6  - http://dx.doi.org/10.1007/978-3-319-59144-5_19
N1  - Designing the Digital Transformation 12th International Conference, DESRIST 2017, Karlsruhe, Germany, May 30 - June 1, 2017.
SP  - 313
EP  - 329
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Weingart, Daniel
A1  - Schneider, Ulf
A1  - Wollert, Jörg
T1  - Doppelt gekoppelt - Kabellose und dynamische Anbindung von CANopen an Profinet IO
T2  - Elektrische Automatisierung - Systeme und Komponenten: SPS-IPC-Drives 2009, Fachmesse & Kongress, 24. - 26. Nov. 2009, Nürnberg ; [Tagungsband]
Y1  - 2009
SN  - 978-3-8007-3184-8
SP  - 147
EP  - 154
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Schmidt, A.
A1  - Rossiter, E.
A1  - Loose, T.
T1  - Durchgängige Schweißsimulation der Eigenspannung und des Gefügezustands auf Basis realer Schweißstromquellenparameter
T2  - DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des Rührreibschweißens in Fertigungsprozessketten" ; Vorträge der Veranstaltung in Nürnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)
Y1  - 2010
SN  - 978-3-87155-592-3
SP  - 37
EP  - 42
PB  - DVS Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Dalguer, Luis A.
A1  - Churilov, Sergey
A1  - Butenweg, Christoph
A1  - Renault, Philippe
A1  - Hyun, An Jun
T1  - Dynamic analysis of a reinforced concrete electrical nuclear building of SMART 2013 project subjected to earthquake excitation using ABAQUS
T2  - Workshop SMART2013 : Paris, France, November 25th - 27th, 2014
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Janotte, N.
A1  - Feckler, G.
A1  - Kötter, Jens
A1  - Decker, Stefan
A1  - Herrmann, Ulf
A1  - Schmitz, Mark
A1  - Lüpfert, E.
T1  - Dynamic performance evaluation of the HelioTrough® collector demonstration loop : towards a new benchmark in parabolic trough qualification
T2  - SolarPACES International Conference 2013, Las Vegas, Nevada, USA, 17 - 20 September 2013 : [proceedings]. - Pt. 1. - (Energy procedia ; 49)
Y1  - 2014
SN  - 978-1-63266-904-9
U6  - http://dx.doi.org/10.1016/j.egypro.2014.03.012
SN  - 1876-6102
N1  - Nebent.: Power and Chemical Energy Systems concentrating solar power
SP  - 109
EP  - 117
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Golland, Alexander
ED  - Taeger, Jürgen
T1  - Dynamic Pricing: Algorithmen zwischen Ökonomie und Datenschutz
T2  - Die Macht der Daten und der Algorithmen - Regulierung von IT, IoT und KI
Y1  - 2019
SN  - 978-3-95599-061-9
N1  - 20. Herbstakademie 2019
Die Macht der Daten und der Algorithmen –
Regulierung von IT, IoT und KI
11.09.-14.09.2019 in der Freien Hansestadt Bremen, Bremer Rathaus/Bremenhalle (Flughafen), Deutschland
SP  - 61
EP  - 75
PB  - OlWIR Verlag für Wirtschaft, Informatik und Recht
CY  - Edewecht
ER  - 
TY  - CHAP
A1  - Korsch, Helge
A1  - Dafnis, Athanasios
A1  - Reimerdes, Hans-Günther
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Dynamic qualification of the HIRENASD elastic wing model
T2  - Motto: Luft- und Raumfahrt: Lehre, Forschung, Industrie - gemeinsam innovativ. Deutscher Luft- und Raumfahrtkongress 2006 : Braunschweig, 06. bis 09. November 2006. Jahrbuch / Deutsche Gesellschaft für Luft- und Raumfahrt. 2006
Y1  - 2006
SP  - 1441
EP  - 1450
PB  - Dt. Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth (DGLR)
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Alexopoulos, Spiros
A1  - Caminos, Ricardo Alexander Chico
A1  - Mitchell, John C.
A1  - Ruiz, Victor C.
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis K.
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117663
SN  - 0094243X
VL  - 2126
SP  - 150007-1
EP  - 150007-8
ER  - 
TY  - CHAP
A1  - Hirsch, Tobias
A1  - Ahlbrink, Nils
A1  - Pitz-Paal, Robert
A1  - Teixeira Boura, Cristiano José
A1  - Hoffschmidt, Bernhard
A1  - Gall, Jan
A1  - Abel, Dirk
A1  - Nolte, Vera
A1  - Wirsum, Manfred
A1  - Andersson, Joel
A1  - Diehl, Moritz
T1  - Dynamic simulation of a solar tower system with open volumetric receiver - a review on the ViCERP project
T2  - SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain
Y1  - 2011
CY  - Granada
ER  - 
TY  - CHAP
A1  - Sattler, Johannes Christoph
A1  - Chico Caminos, Ricardo Alexander
A1  - Atti, Vikrama Nagababu
A1  - Ürlings, Nicolas
A1  - Dutta, Siddharth
A1  - Ruiz, Victor
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis
A1  - Agathokleous, Rafaela
A1  - Alexopoulos, Spiros
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Dynamic simulation tool for a performance evaluation and sensitivity study of a parabolic trough collector system with concrete thermal energy storage
T2  - AIP Conference Proceedings 2303
Y1  - 2020
U6  - http://dx.doi.org/10.1063/5.0029277
SN  - 0094-243X
SP  - 160004
PB  - American Institute of Physics
CY  - Melville, NY
ER  - 
TY  - CHAP
A1  - Hafner, Bernd
A1  - Höller, Robert
A1  - Wemhöner, Carsten
A1  - Schwarzer, Klemens
T1  - Dynamische Simulation thermischer Speicher mit MATLAB
T2  - Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule Köln / 11. Internationales Sonnenforum
Y1  - 1998
SP  - 734
EP  - 740
PB  - Solar Promotion
CY  - München
ER  - 
TY  - CHAP
A1  - Mandekar, Swati
A1  - Jentsch, Lina
A1  - Lutz, Kai
A1  - Behbahani, Mehdi
A1  - Melnykowycz, Mark
T1  - Earable design analysis for sleep EEG measurements
T2  - UbiComp '21
N2  - Conventional EEG devices cannot be used in everyday life and
hence, past decade research has been focused on Ear-EEG for mobile,
at-home monitoring for various applications ranging from
emotion detection to sleep monitoring. As the area available for
electrode contact in the ear is limited, the electrode size and location
play a vital role for an Ear-EEG system. In this investigation, we
present a quantitative study of ear-electrodes with two electrode
sizes at different locations in a wet and dry configuration. Electrode
impedance scales inversely with size and ranges from 450 kΩ to
1.29 MΩ for dry and from 22 kΩ to 42 kΩ for wet contact at 10 Hz.
For any size, the location in the ear canal with the lowest impedance
is ELE (Left Ear Superior), presumably due to increased contact
pressure caused by the outer-ear anatomy. The results can be used
to optimize signal pickup and SNR for specific applications. We
demonstrate this by recording sleep spindles during sleep onset
with high quality (5.27 μVrms).
KW  - EEG
KW  - sensors
KW  - Impedance Spectroscopy
KW  - Sleep EEG
KW  - biopotential electrodes
Y1  - 2021
U6  - http://dx.doi.org/10.1145/3460418.3479328
N1  - UbiComp '21: Adjunct Proceedings of the 2021 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2021 ACM International Symposium on Wearable Computers, September 21–26, 2021, Virtual, USA
SP  - 171
EP  - 175
ER  - 
TY  - CHAP
A1  - Balaskas, Georgios
A1  - Hoffmeister, Benno
A1  - Butenweg, Christoph
A1  - Pilz, Marco
A1  - Bauer, Anna
ED  - Papadrakakis, Manolis
ED  - Fragiadakis, Michalis
T1  - Earthquake early warning and response system based on intelligent seismic and monitoring sensors embedded in a communication platform and coupled with BIM models
T2  - 8th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering
N2  - This paper describes the concept of an innovative, interdisciplinary, user-oriented earthquake warning and rapid response system coupled with a structural health monitoring system (SHM), capable to detect structural damages in real time. The novel system is based on interconnected decentralized seismic and structural health monitoring sensors. It is developed and will be exemplarily applied on critical infrastructures in Lower Rhine Region, in particular on a road bridge and within a chemical industrial facility. A communication network is responsible to exchange information between sensors and forward warnings and status reports about infrastructures’health condition to the concerned recipients (e.g., facility operators, local authorities). Safety measures such as emergency shutdowns are activated to mitigate structural damages and damage propagation. Local monitoring systems of the infrastructures are integrated in BIM models. The visualization of sensor data and the graphic representation of the detected damages provide spatial content to sensors data and serve as a useful and effective tool for the decision-making processes after an earthquake in the region under consideration.
KW  - early warning and response system
KW  - interconnected sensor systems
KW  - seismic structural damage detection via SHM
KW  - integration SHM in BIM
Y1  - 2021
SN  - 978-618-85072-5-8
U6  - http://dx.doi.org/10.7712/120121.8539.18855
SN  - 2623-3347
N1  - COMPDYN 2021
28-30 June 2021, Streamed from Athens, Greece
SP  - 987
EP  - 998
PB  - National Technical University of Athens
CY  - Athen
ER  - 
TY  - CHAP
A1  - Alhaskir, Mohamed
A1  - Tschesche, Matteo
A1  - Linke, Florian
A1  - Schriewer, Elisabeth
A1  - Weber, Yvonne
A1  - Wolking, Stefan
A1  - Röhrig, Rainer
A1  - Koch, Henner
A1  - Kutafina, Ekaterina
ED  - Röhrig, Rainer
ED  - Grabe, Niels
ED  - Haag, Martin
ED  - Hübner, Ursula
ED  - Sax, Ulrich
ED  - Schmidt, Carsten Oliver
ED  - Sedlmayr, Martin
ED  - Zapf, Antonia
T1  - ECG matching: an approach to synchronize ECG datasets for data quality comparisons
T2  - German Medical Data Sciences 2023 – Science. Close to People.
N2  - Clinical assessment of newly developed sensors is important for ensuring their validity. Comparing recordings of emerging electrocardiography (ECG) systems to a reference ECG system requires accurate synchronization of data from both devices. Current methods can be inefficient and prone to errors. To address this issue, three algorithms are presented to synchronize two ECG time series from different recording systems: Binned R-peak Correlation, R-R Interval Correlation, and Average R-peak Distance. These algorithms reduce ECG data to their cyclic features, mitigating inefficiencies and minimizing discrepancies between different recording systems. We evaluate the performance of these algorithms using high-quality data and then assess their robustness after manipulating the R-peaks. Our results show that R-R Interval Correlation was the most efficient, whereas the Average R-peak Distance and Binned R-peak Correlation were more robust against noisy data.
KW  - Electrocardiography
KW  - Wearable electronic device
KW  - Sensors comparison
KW  - Time-series synchronization
Y1  - 2023
SN  - 978-1-64368-428-4 (Print)
SN  - 978-1-64368-429-1 (Online)
U6  - http://dx.doi.org/10.3233/SHTI230718
N1  - Proceedings of the 68th. Annual Meeting of the German Association of Medical Informatics, Biometry, and Epidemiology e.V. (gmds) 2023 in Heilbron, Germany

Part of the series: Studies in Health Technology and Informatics
VL  - 307
SP  - 225
EP  - 232
PB  - IOS Press
ER  -