TY  - CHAP
A1  - Staat, Manfred
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
T1  - Limit and shakedown reliability analysis by nonlinear programming
N2  - 7th International Conference on Reliability of Materials and Structures (RELMAS 2008). June 17 - 20, 2008 ; Saint Petersburg, Russia. pp 354-358. Reprint with corrections in red Introduction Analysis of advanced structures working under extreme heavy loading such as nuclear power plants and piping system should take into account the randomness of loading, geometrical and material parameters. The existing reliability are restricted mostly to the elastic working regime, e.g. allowable local stresses. Development of the limit and shakedown reliability-based analysis and design methods, exploiting potential of the shakedown working regime, is highly needed. In this paper the application of a new algorithm of probabilistic limit and shakedown analysis for shell structures is presented, in which the loading and strength of the material as well as the thickness of the shell are considered as random variables. The reliability analysis problems may be efficiently solved by using a system combining the available FE codes, a deterministic limit and shakedown analysis, and the First and Second Order Reliability Methods (FORM/SORM). Non-linear sensitivity analyses are obtained directly from the solution of the deterministic problem without extra computational costs.
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - Shakedown analysis
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - Reliability analysis of shells based on direct plasticity methods
N2  - Abstracts der CD-Rom Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) 30.06. - 04.07.2008 Venedig, Italien. 2 Seiten Zusammenfassung der Autoren mit graph. Darst. und Literaturverzeichnis
N2  - Abstracts of the Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) June 30th - July, 4th 2008, Venice, Italy. 2 pages with abstracts of the authors, Ill. and references.
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - Shakedown analysis
KW  - First-order reliability method
KW  - second-order reliability method
KW  - Sensitivity
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Mertens, Josef
T1  - Laminar leading edges: manufacturing, contamination, and operational aspects - results from the German RaWid programme
N2  - RaWid was the German national technology programme on transonic aerodynamics and supporting technologies, lasting from 1995 to 1998. One of the main topics was laminar wing development. Besides aerodynamic design work, many operational aspects were investigated. A manufacturing concept was developed to be applied to operational laminar wings and empennages. It was built in a large scale manufacturing demonstrator with the aerodynamic shape of a 1,5 m section of the A320 fin nose. Tolerances in shape and roughness fulfilled all requirements. The construction can easily be adapted to varying stiffness and strength requirements. Weight and manufacturing costs are comparable to common nose designs. The mock-up to be designed in ALTTA is based on this manufacturing principle. Another critical point is contamination of suction surfaces. Several tests were performed to investigate perforated titanium suction surfaces at realistic operational conditions: - a one year flight test with a suction plate in the stagnation area of the Airbus "Beluga" - a one year test of several suction plates in a ground test near the airport - a one year test of a working suction ground test installation at all weather conditions. No critical results were found. There is no long term suction degradation visible. Icing conditions and ground de-icing fluids used on airports did not pose severe problems. Some problems detected require only respection of weak design constraints.
KW  - Laminare Strömung
KW  - Ansaugsystem
KW  - Profilumströmung
KW  - Laminarprofil
KW  - RaWid
KW  - hybrid laminar flow
KW  - suction systems
KW  - suction structure
KW  - contamination
KW  - operational aspects
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
T1  - Time for revision: The regulation of Germany's next generation networks in the light of new economic and technological challenges on telecom markets : Presentation for the 18th Biennial conference of the International Telecommunications Society, June 24–27, 2008 Montreal, Canada
N2  - On 1st January 1998, the German telecom market was fully liberalised. Since then genuine competition between market participants has developed, based on a comprehensive legal and regulatory framework that provides for safeguards against unfair competition and market power by Deutsche Telekom. Today, about 10 years after the liberalisation of the telecommunications sector a revision of this regulatory approach has become necessary because at least on three dimensions the situation is quite different from the one 10 years ago: First, with numerous established alternative operators in the market monopolies have been successfully challenged and competition introduced. Second, not only is Cable TV becoming in large parts of Germany a viable alternative for the provision of broadband services but also mobile services are becoming increasingly a substitute for fixed services. Last but not least there are important technological changes under way, requiring huge investments in infrastructure upgrades for next generation networks. In the light of these new developments the question is to which extent the current regulatory approach of severe ex-ante regulatory intervention is still appropriate. Is any part of the network of the former incumbent still a bottleneck? A more light handed regulatory approach might be the right response to this new situation. The paper is organised as follows: The first section will briefly examine the economic rationale for regulating network access. Based on the assumption that regulation is always necessary when bottlenecks exist regulatory principles for an efficient network access regime will be derived. The second section compares the situation of the German market in early 1998 with the one of today. Thereby three dimensions will be considered: the degree of competition, the potential for substitution and technological developments. The third section will define some requirements for the future regulation of telecom markets. Proposals will be elaborated how to ensure competitive telecom markets in the light of new economic and technological challenges.
KW  - Telekommunikationsmarkt
KW  - Telekommunikationsmarkt
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Heitzer, M.
A1  - Staat, Manfred
T1  - Direct FEM approach to design-by-analysis of pressurized components
N2  - Abstracts of the ACHEMA 2000 - International Meeting on Chemical Engineering, Environmental Protection and Biotechnology, May 22 - 27, 2000. Frankfurt am Main. Achema 2000 : special edition / Linde. [Ed.: Linde AG. Red.: Volker R. Leski]. - Wiesbaden : Linde AG, 2000. - 56 p. : Ill., . - pp: 79 - 81
N2  - Abstracts der ACHEMA 2000 - International Meeting on Chemical Engineering, Environmental Protection and Biotechnology, May 22 - 27, 2000. Frankfurt am Main.
KW  - Finite-Elemente-Methode
KW  - Finite-Elemente-Methode
KW  - limit analysis
KW  - shakedown analysis
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Heitzer, Michael
T1  - Limit and shakedown analysis for plastic design
N2  - Limit and shakedown theorems are exact theories of classical plasticity for the direct computation of safety factors or of the load carrying capacity under constant and varying loads. Simple versions of limit and shakedown analysis are the basis of all design codes for pressure vessels and pipings. Using Finite Element Methods more realistic modeling can be used for a more rational design. The methods can be extended to yield optimum plastic design. In this paper we present a first implementation in FE of limit and shakedown analyses for perfectly plastic material. Limit and shakedown analyses are done of a pipe–junction and a interaction diagram is calculated. The results are in good correspondence with the analytic solution we give in the appendix.
KW  - Einspielen <Werkstoff>
KW  - Traglast
KW  - Finite-Elemente-Methode
KW  - Traglastanalyse
KW  - Einspielanalyse
KW  - FEM
KW  - limit analysis
KW  - shakedown analysis
Y1  - 1997
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Dikta, Gerhard
T1  - Probability of damage of electrical and electronic systems due to indirect lightning flashes - investigation of data from German insurance companies
N2  - In the presented paper data collected from the field related to damage statistics of electrical and electronic apparatus in household are reported and investigated. These damages (total number approx. 74000 cases), registered by five German insurance companies in 2005 and 2006, were adviced by customers as caused by lightning overvoltages. With the use of stochastical methods it is possible, to reasses the collected data and to distinguish between cases, which are with high probability caused by lightning overvoltages, and those, which are not. If there was an indication for a direct strike, this case was excluded, so the focus was only on indirect lightning flashes, i.e. only flashes to ground near the structure and flashes to or nearby an incoming service line were investigated. The data from the field contain the location of damaged apparatus (residence of the policy holder) and the distances of the nearest cloud-to-ground stroke to the location of the damage registered by the German lightning location network BLIDS at the date of damage. The statistical data along with some complementary numerical simulations allow to verify the correspondence of the Standards rules used for IEC 62305-2 with the field data and to define some correction needs. The results could lead to a better understanding whether a damage reported to an insurance company is really caused by indirect lightning, or not.
KW  - Blitzschutz
KW  - lightning flash
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Ballmann, J.
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
T1  - High stress intensities in focussing zones of waves
N2  - The propagation of mechanical waves in plates of isotropic elastic material is investigated. After a short introduction to the understanding of focussing of stress waves in a plate with a curved boundary the method of characteristics is applied to a plate of hyperelastic material. Using this method the propagation of acceleration waves is discussed. Based on this a numerical difference scheme is developed for solving initial-boundary-value problems and applied to two examples: propagation of a point disturbance in a homogeneously finitely strained non-linear elastic plate and geometrical focussing in al linear elastic plate.
KW  - Technische Mechanik
KW  - Wellen
KW  - mechanical waves
Y1  - 1985
U6  - http://dx.doi.org/10.1016/B978-0-444-42520-1.50015-3
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abdelghani, Adnane
T1  - Advancements in Nanotechnology and Microelectronics (ANM '09) <2009, Tunisia>: Proceedings book ; Tunisia, November, 13 & 14, 2009 / Humboldt Kolleg. Ed. by Michael J. Schöning ; Adnane Abdelghani
N2  - The ANM’09 multi-disciplinary scientific program includes topics in the fields of "Nanotechnology and Microelectronics" ranging from "Bio/Micro/Nano Materials and Interfacing" aspects, "Chemical and Bio-Sensors", "Magnetic and Superconducting Devices", "MEMS and Microfluidics" over "Theoretical Aspects, Methods and Modelling" up to the important bridging "Academics meet Industry".
KW  - Nanopartikel
KW  - Biosensor
KW  - Supraleiter
KW  - MEMS
KW  - Biophoton
KW  - Nanotechnology ; Microelectronics ; Biosensors ; Superconductor ; MEMS
Y1  - 2009
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-3113
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
T1  - Encouraging competition and investment into next generation access networks: The case of long term risk sharing contracts
N2  - Working paper distributed at 2nd Annual Next Generation Telecommunications Conference 2009, 13th – 14th October 2009, Brussels 14 pages Abstract Governments all over Europe are in the process of adopting new broadband strategies. The objective is to create modern telecommunications networks based on powerful broadband infrastructures". In doing so, they aim for innovative and investment-friendly concepts. For instance, in a recently published consultation paper on the subject the German regulator BNetzA declared that it will take “greater account of … reducing risks, securing the investment and innovation power, providing planning certainty and transparency – in order to support and advance broadband rollout in Germany”. It further states that when regulating wholesale rates it has to be ensured that “… adequate incentives for network rollout are provided on the one hand, while sustainable and fair competition is ensured on the other”. Also an EC draft recommendation on regulated network access is about to set new standards for the regulation of next generation access networks. According to the recommendation the prices of new assets shall be based on costs plus a projectspecific risk premium to be included in the costs of capital for the investment risk incurred by the operator. This approach has been criticised from various sides. In particular it has been questioned whether such an approach is adequate to meet the objectives of encouraging both competition and investment into next generation access networks. Against this background, the concept of “long term risk sharing contracts” has been proposed recently as an approach which does not only incorporate the various additional risks involved in the deployment of NGA infrastructure, but has several other advantages. This paper will demonstrate that the concept allows for competition to evolve at both the retail and wholesale level on fair, objective, non-discriminatory and transparent terms and conditions. Moreover, it ensures the highest possible investment incentive in line with socially desirable outcome. The paper is organised as follows: The next section will briefly outline the importance of encouraging competition and investment in an NGA-environment. The third section will specify the design of long term risk sharing contracts in view of achieving these objectives. The fourth section will examine potential problems associated with the concept. In doing so a way of how to deal with them will be elaborated. The last section will look at arguments against long term risk sharing contracts. It will be shown that these arguments are not strong enough to build a case against introducing such contracts.
KW  - Electronic Commerce
KW  - Breitband Markt
KW  - Regulierung
KW  - Internet
KW  - Bundesnetzagentur
KW  - broadband market
KW  - regulation
KW  - Internet
KW  - next generation access networks
KW  - risk sharing
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Meyer, Oliver
A1  - Nagl, Manfred
T1  - Graph technology support for conceptual design in civil engineering
N2  - In: Advances in intelligent computing in engineering : proceedings of the 9.International EG-ICE Workshop ; Darmstadt, (01 - 03 August) 2002 / Martina Schnellenbach-Held ... (eds.) . - Düsseldorf: VDI-Verl., 2002 .- Fortschritt-Berichte VDI, Reihe 4, Bauingenieurwesen ; 180 ; S. 1-35 The paper describes a novel way to support conceptual design in civil engineering. The designer uses semantical tools guaranteeing certain internal structures of the design result but also the fulfillment of various constraints. Two different approaches and corresponding tools are discussed: (a) Visually specified tools with automatic code generation to determine a design structure as well as fixing various constraints a design has to obey. These tools are also valuable for design knowledge specialist. (b) Extensions of existing CAD tools to provide semantical knowledge to be used by an architect. It is sketched how these different tools can be combined in the future. The main part of the paper discusses the concepts and realization of two prototypes following the two above approaches. The paper especially discusses that specific graphs and the specification of their structure are useful for both tool realization projects.
KW  - CAD
KW  - CAD ;
KW  - CAD
KW  - civil engineering
Y1  - 2002
SN  - 3-18-318004-9
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
T1  - Conceptual design tools for civil engineering
N2  - Applications of Graph Transformations with Industrial Relevance Lecture Notes in Computer Science, 2004, Volume 3062/2004, 434-439, DOI: http://dx.doi.org/10.1007/978-3-540-25959-6_33 This paper gives a brief overview of the tools we have developed to support conceptual design in civil engineering. Based on the UPGRADE framework, two applications, one for the knowledge engineer and another for architects allow to store domain specific knowledge and to use this knowledge during conceptual design. Consistency analyses check the design against the defined knowledge and inform the architect if rules are violated.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Novacek, V.
A1  - Tolba, R.
A1  - Klinge, U.
A1  - Turquier, F.
A1  - Staat, Manfred
T1  - Experimental and Computational approach to study colorectal anastomosis. ISB2011, Proceedings of the XXIII Congress of the International Society of Biomechanics, Brussels, Belgium, July 3-7, 2011
N2  - Summary: This paper presents a methodology to study and understand the mechanics of stapled anastomotic behaviors by combining empirical experimentation and finite element analysis. Performance of stapled anastomosis is studied in terms of leakage and numerical results which are compared to in vitro experiments performed on fresh porcine tissue. Results suggest that leaks occur between the tissue and staple legs penetrating through the tissue.
KW  - Anastomose
KW  - Finite-Elemente-Methode
KW  - Biomechanik
KW  - Anastomosis
KW  - Finite element method
KW  - Biomechanics
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abdelghani, Adnane
T1  - Nanoscale Science and Technology (NS&T’12) : Proceedings Book Humboldt Kolleg <2012, Tunisia>  ; Tunisia, 17-19 March, 2012 / ed. by Michael J. Schöning ; Adnane Abdelghani
N2  - Proceedings of the 2nd Humboldt Kolleg, Hammamet, Tunisia Organizer: Alexander von Humboldt Stiftung, Germany. pdf 184 p. Welcome Address Dear Participants, Welcome to the 2nd Humboldt Kolleg in “Nanoscale Science and Technology” (NS&T’12) in Tunisia, sponsored by the "Alexander von Humboldt" foundation. The NS&T’12 multidisciplinary scientific program includes seven "hot" topics dealing with "Nanoscale Science and Technology" covering basic and application-oriented research as well as industrial (market) aspects: - Molecular Biophyics, Spectroscopy Techniques, Imaging Microscopy - Nanomaterials Synthesis for Medicine and Bio-chemical Sensors - Nanostructures, Semiconductors, Photonics and Nanodevices - New Technologies in Market Industry - Environment, Electro-chemistry, Bio-polymers and Fuel Cells - Nanomaterials, Photovoltaic, Modelling, Quantum Physics - Microelectronics, Sensors Networks and Embedded Systems We are deeply indebted to all members of the Scientific Committee and General Chairs for joint Sessions and to all speakers and chairmen, who have dedicated invaluable time and efforts for the realization of this event. On behalf of the Organizing Committee, we are cordially inviting you to join the conference and hope that your stay will be fruitful, rewarding and enjoyable. Prof. Dr. Michael J. Schöning, Prof. Dr. Adnane Abdelghani
KW  - Biosensor
KW  - Nanotechnologie
KW  - Nanomaterial
KW  - Nano Materials
KW  - Bio-Sensors
Y1  - 2012
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-3544
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Nagl, Manfred
T1  - Semantic tool support for conceptual design
N2  - ITCE-2003 - 4th Joint Symposium on Information Technology in Civil Engineering ed Flood, I., Seite 1-12, ASCE (CD-ROM), Nashville, USA In this paper we discussed graph based tools to support architects during the conceptual design phase. Conceptual Design is defined before constructive design; the used concepts are more abstract. We develop two graph based approaches, a topdown using the graph rewriting system PROGRES and a more industrially oriented approach, where we extend the CAD system ArchiCAD. In both approaches, knowledge can be defined by a knowledge engineer, in the top-down approach in the domain model graph, in the bottom-up approach in the in an XML file. The defined knowledge is used to incrementally check the sketch and to inform the architect about violations of the defined knowledge. Our goal is to discover design error as soon as possible and to support the architect to design buildings with consideration of conceptual knowledge.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Wilhelms, N.
T1  - Interactive distributed knowledge support for conceptual building design
N2  - In: Net-distributed Co-operation : Xth International Conference on Computing in Civil and Building Engineering, Weimar, June 02 - 04, 2004 ; proceedings / [ed. by Karl Beuke ...] . - Weimar: Bauhaus-Univ. Weimar 2004. - 1. Aufl. . Seite 1-14 ISBN 3-86068-213-X International Conference on Computing in Civil and Building Engineering <10, 2004, Weimar> Summary In our project, we develop new tools for the conceptual design phase. During conceptual design, the coarse functionality and organization of a building is more important than a detailed worked out construction. We identify two roles, first the knowledge engineer who is responsible for knowledge definition and maintenance; second the architect who elaborates the conceptual de-sign. The tool for the knowledge engineer is based on graph technology, it is specified using PROGRES and the UPGRADE framework. The tools for the architect are integrated to the in-dustrial CAD tool ArchiCAD. Consistency between knowledge and conceptual design is en-sured by the constraint checker, another extension to ArchiCAD.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2004
SN  - 3-86068-213-X
ER  - 
TY  - CHAP
A1  - Kirchhof, M.
A1  - Kraft, Bodo
T1  - UML-based modeling of architectural knowledge and design
N2  - IASSE-2004 - 13th International Conference on Intelligent and Adaptive Systems and Software Engineering eds. W. Dosch, N. Debnath, pp. 245-250, ISCA, Cary, NC, 1-3 July 2004, Nice, France We introduce a UML-based model for conceptual design support in civil engineering. Therefore, we identify required extensions to standard UML. Class diagrams are used for elaborating building typespecific knowledge: Object diagrams, implicitly contained in the architect’s sketch, are validated against the defined knowledge. To enable the use of industrial, domain-specific tools, we provide an integrated conceptual design extension. The developed tool support is based on graph rewriting. With our approach architects are enabled to deal with semantic objects during early design phase, assisted by incremental consistency checks.
KW  - UML
KW  - UML
KW  - Unified Modeling Language
KW  - UML
KW  - Unified Modeling Language
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Schneider, Gerd
T1  - Semantic Roomobjects for Conceptual Design Support : A Knowledge-based Approach
N2  - In: Computer Aided Architectural Design Futures 2005 2005, Part 4, 207-216, DOI: http://dx.doi.org/10.1007/1-4020-3698-1_19 The conceptual design at the beginning of the building construction process is essential for the success of a building project. Even if some CAD tools allow elaborating conceptual sketches, they rather focus on the shape of the building elements and not on their functionality. We introduce semantic roomobjects and roomlinks, by way of example to the CAD tool ArchiCAD. These extensions provide a basis for specifying the organisation and functionality of a building and free architects being forced to directly produce detailed constructive sketches. Furthermore, we introduce consistency analyses of the conceptual sketch, based on an ontology containing conceptual relevant knowledge, specific to one class of buildings.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2005
SN  - 978-1-4020-3460-2
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Wilhelms, Nils
T1  - Visual Knowledge Specification for Conceptual Design
N2  - Proc. of the 2005 ASCE Intl. Conf. on Computing in Civil Engineering (ICCC 2005) eds. L. Soibelman und F. Pena-Mora, Seite 1-14, ASCE (CD-ROM), Cancun, Mexico, 2005 Current CAD tools are not able to support the fundamental conceptual design phase, and none of them provides consistency analyses of sketches produced by architects. To give architects a greater support at the conceptual design phase, we develop a CAD tool for conceptual design and a knowledge specification tool allowing the definition of conceptually relevant knowledge. The knowledge is specific to one class of buildings and can be reused. Based on a dynamic knowledge model, different types of design rules formalize the knowledge in a graph-based realization. An expressive visual language provides a user-friendly, human readable representation. Finally, consistency analyses enable conceptual designs to be checked against this defined knowledge. In this paper we concentrate on the knowledge specification part of our project.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Retkowitz, Daniel
T1  - Rule-Dependencies for Visual Knowledge Specification in Conceptual Design
N2  - In: Proc. of the 11th Intl. Conf. on Computing in Civil and Building Engineering (ICCCBE-XI) ed. Hugues Rivard, Montreal, Canada, Seite 1-12, ACSE (CD-ROM), 2006 Currently, the conceptual design phase is not adequately supported by any CAD tool. Neither the support while elaborating conceptual sketches, nor the automatic proof of correctness with respect to effective restrictions is currently provided by any commercial tool. To enable domain experts to store the common as well as their personal domain knowledge, we develop a visual language for knowledge formalization. In this paper, a major extension to the already existing concepts is introduced. The possibility to define rule dependencies extends the expressiveness of the knowledge definition language and contributes to the usability of our approach.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
A1  - Haunert, Martina
T1  - Assessing the effectiveness of price cap regimes for the regulation of fixed telephony markets: has it been successful in achieving competition? : preliminary draft / by Markus Fredebeul-Krein and Martina Haunert. 19th European Regional ITS Conference of the International Telecommunications Society, September 17–19, 2008 Rome, Italy
N2  - 1. Introduction 2. Tariff regulation, rebalancing and price caps 3. Price cap regimes in selected European countries 4. Has price cap regulation been successful? 5. Regulatory implications for other countries
KW  - Telekommunikationsmarkt
KW  - Telekommunikationsmarkt
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Mikucki, Jill A.
A1  - Tulaczyk, Slawek
A1  - Digel, Ilya
A1  - Feldmann, Marco
A1  - Espe, Clemens
A1  - Plescher, Engelbert
A1  - Xu, Changsheng
T1  - IceMole - a maneuverable probe for clean in-situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems : extended abstract / SCAR Open Science Conference 2012, Session 29: Advancing Clean Technologies for Exploration of Glacial Aquatic Ecosystems
N2  - The ”IceMole“ is a novel maneuverable subsurface ice probe for clean in-situ analysis and sampling of subsurface ice and subglacial water/brine. It is developed and build at FH Aachen University of Applied Sciences’ Astronautical Laboratory. A first prototype was successfully tested on the Swiss Morteratsch glacier in 2010. Clean sampling is achieved with a hollow ice screw (as it is used in mountaineering) at the tip of the probe. Maneuverability is achieved with a differentially heated melting head. Funded by the German Space Agency (DLR), a consortium led by FH Aachen currently develops a much more advanced IceMole probe, which includes a sophisticated system for obstacle avoidance, target detection, and navigation in the ice. We intend to use this probe for taking clean samples of subglacial brine at the Blood Falls (McMurdo Dry Valleys, East Antarctica) for chemical and microbiological analysis. In our conference contribution, we 1) describe the IceMole design, 2) report the results of the field tests of the first prototype on the Morteratsch glacier, 3) discuss the probe’s potential for the clean in-situ analysis and sampling of subsurface ice and subglacial liquids, and 4) outline the way ahead in the development of this technology.
KW  - Eisschicht
KW  - Sonde
KW  - subsurface ice
KW  - subglacial aquatic ecosystems
Y1  - 2012
ER  - 
TY  - CHAP
A1  - Artmann, Gerhard
A1  - Digel, Ilya
A1  - Linder, Peter
A1  - Temiz Artmann, Aysegül
T1  - Biophysical and Engineering Contributions to Plant Research
N2  - Tests with palm tree leaves have just started yet and scan data are in the process to be analyzed. The final goal of future project for palm tree gender and species recognition will be to develop optical scanning technology to be applied to date palm tree leaves for in–situ screening purposes. Depending on the software used and the particular requirements of the users the technology potentially shall be able to identify palm tree diseases, palm tree gender, and species of young date palm trees by scanning leaves.
KW  - Pflanzenphysiologie
KW  - Dattel
KW  - Pflanzenscanner
KW  - plant scanner
KW  - date palm tree
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Xu, Changsheng
A1  - Feldmann, Marco
A1  - Plescher, Engelbert
A1  - Digel, Ilya
A1  - Artmann, Gerhard
T1  - Development and testing of a subsurface probe for detection of life in deep ice : [abstract]
N2  - We present the novel concept of a combined drilling and melting probe for subsurface ice research. This probe, named “IceMole”, is currently developed, built, and tested at the FH Aachen University of Applied Sciences’ Astronautical Laboratory. Here, we describe its first prototype design and report the results of its field tests on the Swiss Morteratsch glacier. Although the IceMole design is currently adapted to terrestrial glaciers and ice shields, it may later be modified for the subsurface in-situ investigation of extraterrestrial ice, e.g., on Mars, Europa, and Enceladus. If life exists on those bodies, it may be present in the ice (as life can also be found in the deep ice of Earth).
KW  - Eisschicht
KW  - Sonde
KW  - subsurface probe
KW  - subsurface ice research
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Kurulgan Demirci, Eylem
A1  - Linder, Peter
A1  - Demirci, Taylan
A1  - Gierkowski, Jessica R.
A1  - Digel, Ilya
A1  - Gossmann, Matthias
A1  - Temiz Artmann, Aysegül
T1  - rhAPC reduces the endothelial cell permeability via a decrease of cellular mechanical contractile tensions : [abstract]
N2  - In this study, the CellDrum technology quanitfying cellular mechanical tension on a pico-scale was used to investigate the effect of LPS (lipopolysaccharide) on HAoEC (Human Aortic Endothelial Cell) tension.
KW  - Endothelzelle
KW  - Sepsis
KW  - kontraktile Spannung
KW  - rhAPC
KW  - contractile tension
KW  - rhAPC
KW  - celldrum technology
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Artmann, Gerhard
A1  - Stadler, Andreas M.
A1  - Embs, Jan P.
A1  - Zaccai, Giuseppe
A1  - Büldt, Georg
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
T1  - The crucial role of water in a phase transition of hemoglobin at body temperature : [abstract]
N2  - The observation of a temperature transition of hemoglobin occurring at a critical temperature close to body temperature
KW  - Hämoglobin
KW  - Erythrozyt
KW  - Körpertemperatur
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
A1  - Nojima, H.
T1  - Plasma cluster ions (PCI) influence on microbial cells viability : [abstract]
N2  - Recently, SHARP corporation has developed the world’s first “Plasma Cluster Ions (PCI)” air purification technology, which uses plasma discharge to generate cluster ions. The new plasma cluster device releases into the air positive and negative ions, which are harmless to humans and are able to decompose and deactivate airborne substances by chemical reactions. A lot of phenomenological tests of the PCI air purification technology on microbial cells have been conducted. And, in most cases, it has been shown that PCI demonstrate strongly pronounced killing effect. Although, the particular mechanisms of PCI action are still not evident. We studied variations in resistance to PCI among gram-positive airborne microorganisms, as well as some dose-dependent, spatial, cultural and biochemical properties of PCI action in respect of Staphylococcus spp, Enterococcus spp, Micrococcus spp.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Effects of plasma generated ions on bacteria : [poster]
N2  - Summary and Conclusions PCIs were clearly effective in terms of their antibacterial effects with the strains tested. This efficacy increased with the time the bacteries were exposed to PCIs. The bactericidal action has proved to be irreversible. PCIs were significantly less effective in shadowed areas. PCI exposure caused multiple protein damages as observed in SDS PAGE studies. There was no single but multiple molecular mechanism causing the bacterial death.
KW  - Clusterion
KW  - Bakterien
KW  - plasma generated ions
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Some peculiarities of application of cluster ions generated by plasma in respect of indoor air purification :[abstract]
N2  - Recently, the SHARP Corporation, Japan, has developed the world’s first "Plasma Cluster Ions (PCI)" air purification technology using plasma discharge to generate cluster ions. The new plasma cluster device releases positive and negative ions into the air, which are able to decompose and deactivate harmful airborne substances by chemical reactions. Because cluster ions consist of positive and negative ions that normally exist in the natural world, they are completely harmless and safe to humans. The amount of ozone generated by cluster ions is less than 0.01 ppm, which is significantly less than the 0.05-ppm standard for industrial operations and consumer electronics. This amount, thus, has no harming effects whatsoever on the human body. But particular properties and chemical processes in PCI treatment are still under study. It has been shown that PCI in most cases show strongly pronounced irreversible killing effects in respect of airborne microflora due to free-radical induced reactions and can be considered as a potent technology to disinfect both home, medical and industrial appliances.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Leimena, W.
A1  - Dachwald, Bernd
A1  - Linder, Peter
A1  - Porst, Dariusz
A1  - Kayser, Peter
A1  - Funke, O.
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
T1  - In-situ biological decontamination of an ice melting probe : [abstract]
N2  - The objective of our study was to investigate the efficacy of different in-situ decontamination protocols in the conditions of thermo-mechanical ice-melting.
KW  - Sonde
KW  - Dekontamination
KW  - Wasserstoffperoxid
KW  - Natriumhypochlorit
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Arinkin, Vladimir
A1  - Digel, Ilya
T1  - Water bridge phenomenon : [abstract]
N2  - One of interesting but not well known water properties is related to appearance of highly ordered structures in response to strong electrical field. In 1893 Sir William Armstrong placed a cotton thread between two wine glasses filled with chemically pure water. When high DC voltage was applied between the glasses, a connection consisting of water formed, producing a "water bridge"
KW  - Hydrodynamik
KW  - Elektrodynamik
KW  - Wasserbrücke
KW  - water bridge phenomenon
Y1  - 2009
ER  - 
TY  - CHAP
A1  - ElBashir, Rasha
A1  - Digel, Ilya
T1  - Effect of nitric oxide gas on hydrogels : [abstract]
N2  - The results support our theory that the NO gas has an influence in increasing the translational diffusion of hydrogels and it accelerates the melting process of the gels.
KW  - Stickstoffmonoxid
KW  - Hydrogel
KW  - nitric oxide gas
KW  - hydrogel
Y1  - 2009
ER  - 
TY  - CHAP
A1  - O\'Heras, Carlos
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
T1  - Nanostructured carbon-based column for LPS/protein adsorption : [abstract]
N2  - The absence of a general method for endotoxin removal from liquid interfaces gives an opportunity to find new methods and materials to overcome this gap. Activated nanostructured carbon is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study is to find the adsorption rates for a carboneous material produced at different temperatures, as well as to reveal possible differences between the performance of the material for each of the adsorbates used during the study (hemoglobin, serum albumin and lipopolysaccharide, LPS).
KW  - Kohlenstofffaser
KW  - Adsorption
KW  - Lipopolysaccharide
KW  - aktivierte nanostrukturierte Kohlenstofffaser
KW  - lipopolysaccharides
KW  - activated nanostructured carbon
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Bassam, Rasha
A1  - Digel, Ilya
A1  - Artmann, Gerhard
T1  - Effect of nitric oxide on protein thermal stability : [abstract]
N2  - As a deduction from these results, we can conclude that proteins mainly in vitro, denaturate totally at a temperature between 57°C -62°C, and they also affected by NO and different ions types. In which mainly, NO cause earlier protein denaturation, which means that, NO has a destabilizing effect on proteins, and also different ions will alter the protein denaturation in which, some ions will cause earlier protein denaturation while others not.
KW  - Stickstoffmonoxid
KW  - Proteine
KW  - Hämoglobin
KW  - nitric oxide gas
KW  - protein
KW  - hemoglobin
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Dachwald, Bernd
A1  - Artmann, Gerhard
A1  - Linder, Peter
A1  - Funke, O.
T1  - A concept of a probe for particle analysis and life detection in icy environments
N2  - A melting probe equipped with autofluorescence-based detection system combined with a light scattering unit, and, optionally, with a microarray chip would be ideally suited to probe icy environments like Europa’s ice layer as well as the polar ice layers of Earth and Mars for recent and extinct live.
KW  - Sonde
KW  - Eisschicht
KW  - Autofluoreszenzverfahren
KW  - Lichtstreuungsbasierte Instrumente
KW  - autofluorescence-based detection system
KW  - light scattering analysis
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Mansurov, Zulkhair
A1  - Zhubanova, Azhar A.
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
A1  - Savitskaja, Irina S.
A1  - Kozhalakova, A. A.
A1  - Kistaubaeva, Aida S.
T1  - The sorption of LPS toxic shock by nanoparticles on base of carbonized vegetable raw materials
N2  - Immobilization of lactobacillus on high temperature carbonizated vegetable raw material (rice husk, grape stones) increases their physiological activity and the quantity of the antibacterial metabolits, that consequently lead to increase of the antagonistic activity of lactobacillus. It is implies that the use of the nanosorbents for the attachment of the probiotical microorganisms are highly perspective for decision the important problems, such as the probiotical preparations delivery to the right address and their attachment to intestines mucosa with the following detoxication of gastro-intestinal tract and the normalization of it’s microecology. Besides that, thus, the received carbonizated nanoparticles have peculiar properties – ability to sorption of LPS toxical shock and, hence, to the detoxication of LPS.
KW  - Kohlenstofffaser
KW  - Lipopolysaccharide
KW  - nanostrukturierte carbonisierte Pflanzenteile
KW  - lipopolysaccharides
KW  - nanostructured carbonized plant parts
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Stadler, Andreas M.
A1  - Embs, Jan P.
A1  - Zerlin, Kay
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Zaccai, Joe
A1  - Büldt, Georg
T1  - Temperature transitions of hemoglobin and cytosolic water diffusion in human red blood cells : [poster]
N2  - Background Hemoglobin interactions in red blood cells Hemoglobin dynamics in human red blood cells Diffusion of H2O in red blood cells
KW  - Erythrozyt
KW  - Hämoglobin
KW  - cytosolic water diffusion
KW  - hemoglobin dynamics
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Demirci, Taylan
A1  - Trzewik, Jürgen
A1  - Linder, Peter
A1  - Temiz Artmann, Aysegül
T1  - Fibroblast response to mechanical stress: role of the adhesion substrate : [abstract]
N2  - Mechanical stimulation of the cells resulted in evident changes in the cell morphology, protein composition and gene expression. Microscopically, additional formation of stress fibers accompanied by cell re-arrangements in a monolayer was observed. Also, significant activation of p53 gene was revealed as compared to control. Interestingly, the use of CellTech membrane coating induced cell death after mechanical stress had been applied. Such an effect was not detected when fibronectin had been used as an adhesion substrate.
KW  - Fibroblast
KW  - Mechanische Beanspruchung
KW  - celldrum technology
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Plasma-generated cluster ions' effects on indoor microflora : [abstract]
N2  - Recently, SHARP corporation has developed the world’s first "Plasma Cluster Ions® (PCI)" air purification technology, which uses plasma discharge to generate cluster ions. The new Plasma Cluster Device releases positive and negative ions into the air, which are harmless to humans and are able to decompose and deactivate airborne substances by chemical reactions. In the past, phenomenological tests on the efficacy of the PCI air purification technology on microbial cells have been conducted. In most cases, it has been shown that PCI demonstrated strongly pronounced killing effects on microorganisms. However, the particular mechanisms of PCI action still have to be uncovered.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - DISMED - an innovation portal for printing and media industry
T2  - CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000
Y1  - 2001
N1  - Programmpunkt: Cybercafé.
PB  - CORDIS Archive
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - Production and distribution of personalized information services employing mass customization
T2  - 2nd Interdisciplinary World Congress on Mass Customization and Personalization : MCPC'03, October 6 - 8, 2003, Technische Universität München, Munic, Germany
Y1  - 2003
SP  - Part IV
PB  - Techn. Univ. (TUM)
CY  - München
ET  - CD-Ausg.
ER  - 
TY  - CHAP
A1  - Stender, Michael
A1  - Ritz, Thomas
T1  - Modeling of business-to-business mobile commerce processes
T2  - Electronic proceedings / ICPR 17, 17th International Conference on Production Research [Blacksburg, Virginia, USA, August 3 - 7, 2003]
Y1  - 2003
SN  - 0-9721257-3-6
CY  - Blacksburg, Va.
ET  - CD-ROM-Ausg.
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - Personalized information services : an electronic information commodity and its production
T2  - Electronic publishing '01 : 2001 in the digital publishing odyssey ; proceedings of an ICCC/IFIP conference held at the University of Kent at Canterbury, Kent, United Kingdom, 5 - 7 July, 2001 ; [proceedings of the Fifth Conference on Electronic Publishing]
Y1  - 2001
SN  - 1-58603-191-0
SP  - 48
EP  - 58
PB  - IOS Press [u.a.]
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Burgazzi, L.
A1  - Fiorini, F.
A1  - De Magistris, W. (u.a.)
A1  - Lensa, W. von
A1  - Staat, Manfred
A1  - Altes, J.
T1  - Reliability Assessment of Passive Safety Systems
T2  - Proceedings of the 6th International Conference on Nuclear Engineering : ICONE : May 10 - 14, 1998, San Diego, Calif.
Y1  - 1998
N1  - CD-ROM
PB  - American Society of Mechanical Engineers
CY  - New York
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Dehnhardt, W.
A1  - Mills, J. S.
T1  - Levels in the closed neutron shell nucleus ¹⁴² Nd
T2  - International Symposium on Highly Excited States in Nuclei held at Jülich from 23-26 September 1975 : proceedings; Vol. 1 Contributed papers
Y1  - 1975
N1  - International Symposium on Highly Excited States in Nuclei <1975, Jülich> ;  European Physical Society ; Institut für Kernphysik <Jülich>
SP  - 51
PB  - Verlag des Forschungszentrums Jülich
CY  - Jülich
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Neskakis, A.
A1  - Lieder, R. M.
A1  - Beuscher, H.
T1  - Study of rotational aligned bands in ¹⁹⁰,¹⁹²,¹⁹⁴ Au
T2  - Nuclear interactions : International Conference on Nuclear Interactions held in Canberra, 28 Aug. - 1 Sept. 1978 / ed. by Brian Albert Robson. - (Lecture notes in physics ; 92)
Y1  - 1978
SN  - 978-3-540-09102-8
N1  - Australian Academy of Science <Canberra> ; International Conference on Nuclear Interactions <1978, Canberra>
SP  - 428
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Peters, H.
A1  - Ziemons, Karl
A1  - Dammers, J.
A1  - Müller-Veggian, Mattea
ED  - Nenonen, Jukka
T1  - Continuous head motion detection during MEG measurement using head location coils
T2  - Proceedings of the 12th International Conference on Biomagnetism : August 13 - 17, 2000, Helsinki University of Technology, Espoo, Finland
Y1  - 2001
SN  - 951-22-5401-8
N1  - Biomag <12, 2000, Espoo> ; Teknillinen Korkeakoulu <Helsinki> ; International Conference on Biomagnetism <12, 2000, Espoo>
PB  - Helsinki Univ. of Technology, Laboratory of Biomedical Engineering
CY  - Espoo
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Dehnhardt, W.
A1  - Merdinger, I. G.
A1  - Mills, S. J.
T1  - High-spin yrast states in transitional nuclei ¹³²,¹³⁴ Ce
T2  - Proceedings of the International Conference on Nuclear Physics : Munich, August 27 - September 1, 1973
Y1  - 1973
SN  - 0-7204-0280-8
SP  - 180
PB  - North Holland Pub.
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Bochev, B.
A1  - Lieder, R. M.
A1  - Didelez, J. P.
T1  - Measuremenmt of particle spectra of α induced non-equilibrium reactions for ²⁰⁶⁻²¹² Po
T2  - Proceedings of the International Conference on Nuclear Physics. 1980,1 (1981)
Y1  - 1981
N1  - Vol. 1: Abstracts of papers ; International Conference on Nuclear Physics <1980, Berkeley, Calif.>
SP  - 452
ER  - 
TY  - CHAP
A1  - Müller-Veggian, Mattea
A1  - Haenni, D. R.
A1  - Beuscher, H.
A1  - Lieder, R. M.
T1  - Weak coupling of a neutron hole to a ¹⁴⁶ Gd core ; an in-beam study of ¹⁴⁵ Gd
T2  - Structure of medium-heavy nuclei, 1979 : proceedings of the 6. European Physical Soc. Nuclear Divisional Conference on the Structure of Medium-Heavy Nuclei held in Rhodes, Greece, 1-4 May 1979 / ed. Committee: G. S. Anagnostatos ... - (Conference series / Institute of Physics London, Bristol ; 49)
Y1  - 1980
SN  - 0-85498-140-3
N1  - Conference on the Structure of Medium Heavy Nuclei <6, 1979, Rodos> ; European Physical Society / Nuclear Physics Division
SP  - 133
PB  - Inst. of Physics
CY  - Bristol
ER  - 
TY  - CHAP
A1  - Hardt, Arno
A1  - Abdel-Gawad, A
A1  - Martin, S.
A1  - Reich, J.
T1  - Design procedures for the Juelich QQDDQ high resolution spectrometer
T2  - Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975
Y1  - 1975
SP  - 45
EP  - 51
ER  - 
TY  - CHAP
A1  - Mertens, Josef
T1  - Next steps envisaged to improve wing performance of commercial aircraft
T2  - Aerodynamic drag reduction technologies : proceedings of the CEAS/DragNet European Drag Reduction Conference, 19–21 June 2000, Potsdam, Germany. - (Notes on numerical fluid mechanics ; 76)
Y1  - 2001
SN  - 3-540-41911-X (Print)
SN  - 978-3-540-45359-8 (Elektronisch)
U6  - http://dx.doi.org/10.1007/978-3-540-45359-8_26
SP  - 246
EP  - 255
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Kurz, Melanie
ED  - Feijs, Loe
T1  - On the benefit of moving images for the evaluation of form in virtual space : reflections in model theory
T2  - Design and semantics of form and movement : DeSForM 2008 ; [Hochschule für Gestaltung Offenbach am Main, 6.-7.11.2008]
Y1  - 2008
SN  - 978-90-809801-2-9
SP  - 31
EP  - 34
PB  - Philips
CY  - Eindhoven
ER  - 
TY  - CHAP
A1  - Kurz, Melanie
T1  - Theses on the significance of the model in the form-finding process
T2  - "Focused" - Current Design Research Projects and Methods : Swiss Design Network Symposium 2008, 30 - 31 May 2008 Mount Gurten, Berne Switzerland
Y1  - 2008
SN  - 978-3-9523138-0-0
N1  - Swiss Design Network Symposium 2008, Bern
SP  - 115
EP  - 127
PB  - SwissDesignNetwork, SDN
CY  - Genf
ER  - 
TY  - CHAP
A1  - Kurz, Melanie
T1  - Recognition of shape in virtual visualizations
T2  - Proceedings : November 15 - 17, 2006, Technische Universität Darmstadt, Darmstadt, Germany ; PACE, Partners for the advancement of collaborative engineering education
Y1  - 2006
SN  - 978-3-00-020161-5
N1  - International PACE Forum Collaborative Visualization ; (2006, Darmstadt)
SP  - 203
EP  - 209
PB  - Techn. Univ.
CY  - Darmstadt
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
A1  - Steingröver, Markus
T1  - Wholesale Broadband Access to IPTV in an NGA environment : how to deal with it from a regulatory perspective?
Y1  - 2012
N1  - Regional ITS Conference of the international Telecommunications Society , February 22-24, 2012 New Delhi, India
SP  - 1
EP  - 16
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Abouzar, Maryam H.
A1  - Schöning, Michael Josef
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - (Bio-­)chemical sensor array based on nanoplate SOI capacitors
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 31
EP  - 31
ER  - 
TY  - CHAP
A1  - Bohrn, U.
A1  - Stütz, E.
A1  - Fleischer, M.
A1  - Schöning, Michael Josef
A1  - Wagner, P.
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - Towards a paradigm change – mammalian cells as sensitive biosensor layers for the detection of unexpected toxic substances in air
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 44
EP  - 44
ER  - 
TY  - CHAP
A1  - Reisert, Steffen
A1  - Geissler, H.
A1  - Flörke, R.
A1  - Weiler, C.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - Characterisation of aseptic sterilisation processes using an electronic nose
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 45
EP  - 45
ER  - 
TY  - CHAP
A1  - Schusser, Sebastian
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - Biopolymer-degradation monitoring by chip-­based impedance spectroscopy technique
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 47
EP  - 47
ER  - 
TY  - CHAP
A1  - Yoshinobu, Tatsuo
A1  - Miyamoto, Ko-Ichiro
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
ED  - Yamaguchi, Takami
T1  - Miniaturized and high-speed chemical imaging systems
T2  - Nano-Biomedical Engineering 2012. Proceedings of the Tohoku University Global Centre of Excellence Programme, Sakura Hall, Tohoku University, Sendai Japan, 5 – 6 March 2012
Y1  - 2012
U6  - http://dx.doi.org/10.1142/9781848169067_0045
SP  - 386
EP  - 395
PB  - World Scientific
CY  - Singapur
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Hendrick, P.
A1  - Recker, E.
A1  - Elsing, R.
ED  - DeLuca, Luigi T.
T1  - Development and integration of a scalable low NOx combustion chamber for a hydrogen fuelled aero gas turbine
T2  - Progress in Propulsion Physics. - Vol. 4
Y1  - 2013
SN  - 978-2-7598-0876-2
U6  - http://dx.doi.org/10.1051/eucass/201304357
N1  - 4th European Conference for Aero-Space Sciences : July 4 - 8, 2011, St Petersburg, Russia ; EUCASS <4, 2011, St. Petersburg>
SP  - 357
EP  - 372
PB  - EDP Sciences
CY  - [Les Ulis]
ER  - 
TY  - CHAP
A1  - Gerhards, Michael
A1  - Sander, Volker
A1  - Belloum, Adam
ED  - Zimmermann, Wolf
ED  - Lee, Yong Woo
ED  - Demchenko, Yuri
T1  - About the flexible Migration of Workflow Tasks to Clouds : Combining on- and off-premise Executions of Applications
T2  - CLOUD COMPUTING 2012 : The Third International Conference on Cloud Computing, GRIDs, and Virtualization ; July 22-27, 2012 - Nice, France
N2  - An increasing number of applications target their executions on specific hardware like general purpose Graphics Processing Units. Some Cloud Computing providers offer this specific hardware so that organizations can rent such resources. However, outsourcing the whole application to the Cloud causes avoidable costs if only some parts of the application benefit from the specific expensive hardware. A partial execution of applications in the Cloud is a tradeoff between costs and efficiency. This paper addresses the demand for a consistent framework that allows for a mixture of on- and off-premise calculations by migrating only specific parts to a Cloud. It uses the concept of workflows to present how individual workflow tasks can be migrated to the Cloud whereas the remaining tasks are executed on-premise.
KW  - Workflow Orchestration
KW  - Workflow
KW  - Grid Computing
KW  - Cloud Service Broker
KW  - Cloud Computing
Y1  - 2012
SN  - 978-1-61208-216-5
SP  - 82
EP  - 87
PB  - IARIA Journals
ER  - 
TY  - CHAP
A1  - Christen, Marc
A1  - Bartelt, Perry
A1  - Kowalski, Julia
A1  - Stoffel, Lukus
T1  - Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS
T2  - Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008
N2  - Numerical models have become an essential part of snow avalanche engineering. Recent
advances in understanding the rheology of flowing snow and the mechanics of entrainment and
deposition have made numerical models more reliable. Coupled with field observations and historical
records, they are especially helpful in understanding avalanche flow in complex terrain. However, the
application of numerical models poses several new challenges to avalanche engineers. A detailed
understanding of the avalanche phenomena is required to specify initial conditions (release zone
dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer
based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this
paper we discuss these problems by presenting the computer model RAMMS, which was specially
designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged
equations governing avalanche flow with first and second-order numerical solution schemes. A
tremendous effort has been invested in the implementation of advanced input and output features.
Simulation results are therefore clearly and easily visualized to simplify their interpretation. More
importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model
performance. In this paper we present the governing differential equations, highlight some of the input
and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that
occurred in April 2008, near Klosters/Monbiel, Switzerland.
KW  - snow
KW  - avalanche
Y1  - 2008
SP  - 709
EP  - 716
ER  - 
TY  - CHAP
A1  - Börner, Sebastian
A1  - Funke, Harald
A1  - Hendrick, P.
A1  - Recker, E.
T1  - LES of Jets In Cross-Flow and Application to the “Micromix” Hydrogen Combustion
T2  - XIX International Symposium on Air Breathing Engines 2009 (ISABE 2009) : Proceedings of a meeting held 7-11 September 2009, Montreal, Canada
Y1  - 2009
SN  - 9781615676064
SP  - 1555
EP  - 1561
ER  - 
TY  - CHAP
A1  - Logen, Steffen
A1  - Höfken, Hans
A1  - Schuba, Marko
T1  - Simplifying RAM Forensics : A GUI and Extensions for the Volatility Framework
T2  - 2012 Seventh International Conference on Availability, Reliability and Security (ARES), 20-24 August 2012, Prague, Czech Republic
N2  - The Volatility Framework is a collection of tools for the analysis of computer RAM. The framework offers a multitude of analysis options and is used by many investigators worldwide. Volatility currently comes with a command line interface only, which might be a hinderer for some investigators to use the tool. In this paper we present a GUI and extensions for the Volatility Framework, which on the one hand simplify the usage of the tool and on the other hand offer additional functionality like storage of results in a database, shortcuts for long Volatility Framework command sequences, and entirely new commands based on correlation of data stored in the database.
Y1  - 2012
SN  - 978-1-4673-2244-7
U6  - http://dx.doi.org/10.1109/ARES.2012.12
SP  - 620
EP  - 624
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Nachtrodt, Frederik
A1  - Heuermann, Holger
A1  - Scherer, Ulrich W.
A1  - Mostacci, Domiziano
A1  - Finger, Torsten
A1  - Tietsch, Wolfgang
T1  - A novel 2.45 GHz/200 W Microwave Plasma Jet for High Temperature Applications above 3600 K
T2  - Journal of Physics : Conference Series
Y1  - 2012
SN  - 1742-6596
VL  - 406
IS  - 012029
ER  - 
TY  - CHAP
A1  - Nix, Yvonne
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Implementation of the edge-based smoothed extended finite element method
T2  - Proceedings 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
Y1  - 2012
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Application of an edge-based smoothed finite element method on geometrically non-linear plates of non-linear material
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Numerical stability enhancement of modeling hyperelastic materials
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - A primal-dual shakedown analysis of 3D structures using the face-based smoothed finite element method
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Nguyen, Thanh Ngoc
A1  - Staat, Manfred
T1  - FEM based shakedown analysis of hardening structures
T2  - Proceedings International Conference on Advances in Computational Mechanics (ACOME)
Y1  - 2012
N1  - International Conference on Advances in Computational Mechanics (ACOME), August 14-16, 2012, Ho Chi Minh City, Vietnam
SP  - 870
EP  - 882
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Kroninger, D.
A1  - Kitajima, J.
A1  - Kazari, M.
A1  - Horikama, A.
T1  - Numerical and experimental characterization of low NOx Micromix combustion principle for industrial hydrogen gas turbine applications
T2  - Proceedings of ASME Turbo Expo 2012
Y1  - 2013
N1  - ASME Turbo Expo 2012, GT2012, June 11-15, 2012, Copenhagen, Denmark
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Low NOx Hydrogen combustion chamber for industrial gas turbine applications“, 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery
T2  - ISROMAC-14 : the Forteenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; Honolulu, Hawaii, February 27 - March 02nd, 2012
Y1  - 2012
N1  - International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; (14 ; 2012.02.27-03.02 ; Honolulu, Hawaii)
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
T1  - Numerical Debris Flow Simulation
T2  - Schweizer Numerik Kolloquium : Book of Abstracts 12. April 2006
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - McArdell, B. W.
A1  - Bartelt, Perry
T1  - A comparison of two approaches to modeling multiphase gravity currents
T2  - Geophysical Research Abstracts
Y1  - 2006
N1  - A-08738
VL  - 8
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - Bartelt, Perry
A1  - McElwaine, J.
T1  - Two-phase debris flow modeling
T2  - Geophysical Research Abstracts
Y1  - 2007
N1  - A-08119
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - McElwaine, J.
T1  - Two-phase debris flow modeling
T2  - Geophysical Research Abstracts
Y1  - 2008
N1  - A-01048
ER  - 
TY  - CHAP
A1  - Olaru, Alexandra Maria
A1  - Kowalski, Julia
A1  - Sethi, Vaishali
A1  - Blümich, Bernhard
T1  - Fluid Transport in Porous Media probed by Relaxation-Exchange NMR
T2  - 2011 Fall Meeting, AGU, San Francisco, Calif., 5-9 Dec.
Y1  - 2011
N1  - H12B-07; American Geophysical Union
ER  - 
TY  - CHAP
A1  - Streun, M.
A1  - Al-Kaddoum, R.
A1  - Parl, C.
A1  - Pietrzyk, U.
A1  - Ziemons, Karl
A1  - Waasen, S. van
T1  - Simulation studies of optical photons in monolithic block scintillators
T2  - 2011 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)
N2  - The interest in PET detectors with monolithic block scintillators is growing. In order to obtain high spatial resolutions dedicated positioning algorithms are required. But even an ideal algorithm can only deliver information which is provided by the detector. In this simulation study we investigated the light distribution on one surface of cuboid LSO scintillators of different size. Scintillators with a large aspect ratio (small footprint and large height) showed significant position information only for a minimum interaction depth of the gamma particle. The results allow a quantitative estimate for a useful aspect ratio.
Y1  - 2012
SN  - 978-1-4673-0120-6 (electronic ISBN)
SN  - 978-1-4673-0118-3 (print ISBN)
U6  - http://dx.doi.org/10.1109/NSSMIC.2011.6154621
SP  - 1380
EP  - 1382
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Holzapfel, Gerhard A.
T1  - Effectiveness of the edge-based smoothed finite element method applied to soft biological tissues
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Hunyh
A1  - Staat, Manfred
T1  - Finite Element Implementation of a 3D Fung-type Model
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - Load Carrying Capacity of Joints with Dowel Type Fasteners in Solid Wood Panels
T2  - Proceedings. CIB-W18 Meeting 2006, Florence, Italy 2006
Y1  - 2006
SN  - 0945-6996
N1  - Paper 39-7-5
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - Edge Joints with Dowel Type Fasteners in Cross Laminated Timber
T2  - Proceedings. CIB-W18 Meeting 2007, Bled, Slovenia 2007
Y1  - 2007
SN  - 0945-6996
N1  - Paper 40-7-2
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
ED  - Cecotti, A.
T1  - Determining Suitable Spacings and Distances for Self-tapping Screws by Experimental and Numerical Studies
T2  - Proceedings of the 11th World Conference on Timber Engineering, WCTE 2010 : World Conference on Timber Engineering; [June 20 - 24, 2010, Riva del Garda, Trento, Italy] . Vol. III, Riva del Garda, Italy 2010
Y1  - 2010
N1  - Extended abstract. Full paper: DVD, Session 55, ID 108, 9 Seiten
SP  - 669
EP  - 670
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - A new method to determine suitable spacings and distances for self-tapping screws
T2  - Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures
N2  - The determination of spacing, edge and end distance requirements for self-tapping screws requires numerous and comprehensive insertion tests. Yet the results of such tests cannot be transferred to other types of screws or even to screws of different diameter because of differences in shape or geometry. To reduce the effort of insertion tests a new method was developed which allows the estimation of required spacings, distances and timber thickness.
Y1  - 2010
SN  - 1864-1784
N1  - Paper 43-21-2
VL  - 43
PB  - Lehrstuhl für Ingenieurholzbau und Baukonstruktionen
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Engels, Elmar
A1  - Schnabel, Holger
T1  - Rapid-control-prototyping of industrial drives for the sercos automation bus
T2  - 13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan & 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)
N2  - This article describes the functionality of a MATLAB® library that can be used to develop motion-logic applications in MATLAB programming language for industrial drive and control systems using the well known sercos automation bus. Therewith MATLAB's functionality is extended to designing automation applications from single axis machines up to multi-kinematic robots.
KW  - MATLAB , MLPI , Motion control , Open Core , industrial drives , rapid control prototypin , sercos automation bus
Y1  - 2012
UR  - http://dx.doi.org/10.1109/MECATRONICS.2012.6451005
SN  - 978-1-4673-4771-6
SP  - 177
EP  - 181
ER  - 
TY  - CHAP
A1  - Xu, Zhanping
A1  - Schwarte, Rudolf
A1  - Heinol, Horst-Guenther
A1  - Buxbaum, Bernd
A1  - Ringbeck, Thorsten
ED  - Cheung, Edmund H. M.
T1  - Smart pixel : photonic mixer device (PMD) ; new system concept of a 3D-imaging camera-on-a-chip
T2  - Proceedings : M2VIP '98; Nanjing, China, 10th - 12th September 1998
Y1  - 1998
SN  - 962-442-129-3
N1  - International Conference on Mechatronics and Machine Vision in Practice <5, 1998, Nanking> ;  M2VIP <5, 1998, Nanking>
SP  - 259
EP  - 264
CY  - Hong Kong
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Schwarte, Rudolf
A1  - Ringbeck, Thorsten
A1  - [u.a.], 
T1  - A new approach in optical broadband communication systems : a high integrated optical phase locked loop based on a mixing and correlating sensor, the Photonic Mixer Device (PMD)
T2  - Proceedings / OPTO 98, Internationaler Kongress und Fachausstellung für Optische Sensorik, Messtechnik und Elektronik, 18. - 20. Mai 1998, Kongresszentrum Erfurt
Y1  - 1998
N1  - Internationaler Kongress und Fachausstellung für Optische Sensorik, Messtechnik & Elektronik <3, 1998, Erfurt> ; International Congress and Exhibition on Optoelectronics, Optical Sensors and Measuring Techniques <3, 1998, Erfurt> ; OPTO <3, 1998, Erfurt>
SP  - 59
EP  - 64
PB  - ACS Organisations GmbH
CY  - Wunsdorf
ER  - 
TY  - CHAP
A1  - Schwarte, Rudolf
A1  - Buxbaum, Bernd
A1  - Heinol, Horst-Guenther
A1  - Xu, Zhanping
A1  - Ringbeck, Thorsten
A1  - Zang, Zhigang
T1  - Novel 3D-vision systems based on layout optimized PMD-structures
T2  - Proceedings / OPTO 98, Internationaler Kongress und Fachausstellung für Optische Sensorik, Messtechnik und Elektronik, 18. - 20. Mai 1998, Kongreßzentrum Erfurt
Y1  - 1998
N1  - Internationaler Kongress und Fachausstellung für Optische Sensorik, Messtechnik & Elektronik <3, 1998, Erfurt> ; International Congress and Exhibition on Optoelectronics, Optical Sensors and Measuring Techniques <3, 1998, Erfurt> ; OPTO <3, 1998, Erfurt>
SP  - 197
EP  - 202
PB  - ACS Organisations GmbH
CY  - Wunsdorf
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Hagebeuker, Bianca
ED  - Grün, Armin
T1  - A 3D time of flight camera of object detection
T2  - Optical 3-D measurement techniques VIII : applications in GIS, mapping, manufacturing, quality control, robotics, navigation, mobile mapping, medical imaging, cultural heritage, VR generation and animation; papers presented to the conference organized at ETH Zurich, Switzerland, July 9 - 12, 2007. - Vol. 1
Y1  - 2007
SN  - 3-906467-67-8 (Gesamtwerk)
N1  - Conference on Optical 3-D Measurement Techniques <8, 2007, Zürich>
SP  - 1
EP  - 16
PB  - ETH
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Hess, Holger
A1  - Ringbeck, Thorsten
ED  - Voges, Edgar
T1  - The photonic mixer device : new perspectives in optical wireless communication
T2  - International Workshop on Optical MEMS and Integrated Optics : Universität Dortmund, Universitätskolleg Bommerholz, 11. & 12. June 2001
Y1  - 2001
N1  - International Workshop on Optical MEMS and Integrated Optics <2001, Dortmund>
SP  - (12)1
EP  - (12)5
PB  - Univ.
CY  - Dortmund
ER  - 
TY  - CHAP
A1  - Penne, Jochen
A1  - Profittlich, Martin
A1  - Ringbeck, Thorsten
A1  - Buxbaum, Bernd
ED  - D, Nicola D'Apuzzo
T1  - Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras
T2  - Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010
Y1  - 2010
SN  - 978-3-033-02714-5
SP  - 361
EP  - 369
PB  - Hometrica Consulting
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Lindner, Marvin
A1  - Kolb, Andreas
A1  - Ringbeck, Thorsten
T1  - New insights into the calibration of ToF-sensors
T2  - 2008 IEEE Computer Society Conference on Computer Vision and Pattern Recognition workshops : Anchorage, AK, 23 - 28 June 2008
N2  - Time-of-flight (ToF) sensors have become an alternative to conventional distance sensing techniques like laser scanners or image based stereo. ToF sensors provide full range distance information at high frame-rates and thus have a significant impact onto current research in areas like online object recognition, collision prevention or scene reconstruction. However, ToF cameras like the photonic mixer device (PMD) still exhibit a number of challenges regarding static and dynamic effects, e.g. systematic distance errors and motion artefacts, respectively. Sensor calibration techniques reducing static system errors have been proposed and show promising results. However, current calibration techniques in general need a large set of reference data in order to determine the corresponding parameters for the calibration model. This paper introduces a new calibration approach which combines different demodulation techniques for the ToF- camera 's reference signal. Examples show, that the resulting combined demodulation technique yields improved distance values based on only two required reference data sets.
Y1  - 2008
SN  - 978-1-4244-2339-2
SN  - 978-1-4244-2340-8
SP  - 1
EP  - 5
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Hagebeuker, Bianca
A1  - Ringbeck, Thorsten
A1  - Frydlewicz, Paul
A1  - Jesorsky, Oliver
A1  - Sünkel, Thomas
ED  - Grote, Caspar
T1  - PMD-Sensoren als Schlüsselkomponenten für die mehrdimensionale Umfelderfassung des Fahrzeuginnenraums
T2  - Begleittexte zum Entwicklerforum KFZ-Elektronik & FlexRay Solution Day : 15.Mai 2007, Ludwigsburg
Y1  - 2007
N1  - Entwicklerforum Kfz-Elektronik <2007, Ludwigsburg> ; FlexRay Solution Day <2007, Ludwigsburg>
SP  - 287
EP  - 296
PB  - WEKA-Fachzeitschr.-Verl.
CY  - Poing
ER  - 
TY  - CHAP
A1  - Engels, Elmar
T1  - A field bus library for MATLAB based on open core engineering
T2  - Proceedings to the 14th International Workshop on Research and Education in Mechatronics, REM 2013, Wien, 05.06.-06.06.2013.
Y1  - 2013
SN  - 978-3-90275-907-8
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Schwarte, Rudolf
A1  - Ringbeck, Thorsten
ED  - Kamerman, Gary W.
T1  - Synchronization in spread spectrum laser radar systems based on PMD-DLL
T2  - Laser radar technology and applications V : 26 - 28 April 2000, Orlando, USA. - (SPIE proceedings series ; 4035)
Y1  - 2000
SN  - 0-8194-3661-5
SN  - 0038-7355
SN  - 0361-0748
SN  - 0277-786X
N1  - Laser radar technology and applications <5, 2000, Orlando, Fla.>
SP  - 204
EP  - 216
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Schwarte, Rudolf
A1  - Buxbaum, Bernd
ED  - Korevaar, Eric John
T1  - Introduction of a new opto-electrical phase-locked loop in CMOS technology: the PMD-PLL
T2  - Optical wireless communications II / [SPIE Conference on Optical Wireless Communications II], 22 September 1999, Boston, Massachusetts. - (SPIE proceedings series ; 3850)
Y1  - 1999
SN  - 0-8194-3443-4
SN  - 0038-7355
SN  - 0361-0748
SN  - 0277-786X
N1  - Conference on Optical Wireless Communications <2, 1999, Boston, Mass.
SP  - 108
EP  - 116
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Schwarte, Rudolf
A1  - Ringbeck, Thorsten
ED  - Korevaar, Eric John
T1  - PMD-PLL: receiver structure for incoherent communication and ranging systems
T2  - Optical wireless communications II / [SPIE Conference on Optical Wireless Communications II], 22 September 1999, Boston, Massachusetts. - (SPIE proceedings series ; 3850)
Y1  - 1999
SN  - 0-8194-3443-4
SN  - 0038-7355
SN  - 0277-786X
N1  - Conference on Optical Wireless Communications <2, 1999, Boston, Mass.>
SP  - 116
EP  - 130
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Schwarte, Rudolf
A1  - Ringbeck, Thorsten
A1  - [u.a.], 
ED  - Krüger, Sven
T1  - New Powerful Sensory Tool in Automotive Safety Systems Based on PMD-Technology
T2  - Advanced microsystems for automotive applications 2000
Y1  - 2000
SN  - 3-5406-7087-4
N1  - Advanced microsystems for automotive applications <4, 2000, Berlin> ; AMAA <4, 2000, Berlin>
Autorenang. im Bd.: R. Schwarte et al.
SP  - 181
EP  - 204
PB  - Springer
CY  - Berlin [u.a.]
ER  -