TY  - JOUR
A1  - Biener, Ernst
A1  - Rouvé, G.
T1  - Behaviour and maintenance of some old masonry gravity dams
JF  - Safety of dams : proceedings of the International Conference on Safety of Dams, Coimbra, 23-28 April 1984 / ed. by J. Laginha Serafim. - [Hauptbd.]
Y1  - 1984
SN  - 90-6191-522-8
N1  - International Conference on Safety of Dams <1984, Coimbra> ; ISBN Set: 90-6191-521-X
SP  - 101
EP  - 106
PB  - Rotterdam [u.a.]
CY  - Balkema
ER  - 
TY  - JOUR
A1  - Biener, Ernst
T1  - Rehabilitation of old gravity dams
JF  - [Transactions] : proceedings of fifteenth international congress on large dams ; 24 - 28 Juin 1985, Lausanne, Suisse = Quinzieme Congres International des Grands Barrages. - Bd. 4
Y1  - 1985
N1  - International Congress on Large Dams <15, 1985, Paris>
SP  - Q 59, R.2, S. 21
EP  - 23
PB  - Intern. Commission on Large Dams
CY  - Paris
ER  - 
TY  - JOUR
A1  - Höttges, Jörg
A1  - Ritterbach, E.
A1  - Els, H.
T1  - Optical Improvement of LDV-Measurement in Pipe Flow / Ritterbach, E.; J. Höttges; H. Els
JF  - Laser anemometry : advances and applications; proceedings of the 2. International Conference, Strathclyde, Scotland, 21st to 23rd September 1987 / ed. by John Turner ... UK LDA Users Group
Y1  - 1987
SN  - 3540187561
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Sasse, T.
T1  - Experience with new techniques in slurry cutoff wall construction
JF  - ISWA 88, proceedings of the 5th International Solid Wastes Conference : September 11 - 16th, 1988, Copenhagen, Denmark / ed. by Lizzi Andersen ... - Vol. 1 : Oral presentations
Y1  - 1988
SN  - 0-12-058451-4
N1  - International Solid Wastes Conference <5, 1988, København> ; International Solid Wastes and Public Cleansing Association
SP  - 41
EP  - 46
PB  - Acad. Press
CY  - London [u.a.]
ER  - 
TY  - JOUR
A1  - Höttges, Jörg
A1  - Arnold, Uwe
A1  - Rouvé, Gerhard
T1  - Combined Digital Image and Finite Element Analysis of Mixing in Compound Open Channel Flow / 	Arnold, U.; J. Höttges; G. Rouvé
JF  - Refined flow modelling and turbulence measurements : proceedings of the Third International Symposium Tokyo, Japan 26 - 28 July, 1988 / ed. by Y. Iwasa. Scientific Organizing Committee of the Third International Symposium on Refined Flow Modelling and Tur
Y1  - 1989
SN  - 4-946443-03-7
N1  - International Symposium on Refined Flow Modelling and Turbulence Measurements <3, 1988, T&#333;ky&#333;>
SP  - 569
EP  - 576
PB  - Universal Acad. Press
CY  - Tokyo
ER  - 
TY  - JOUR
A1  - Höttges, Jörg
T1  - Turbulence and Mixing Mechanics in Compound Open Channel Flow / Arnold, Uwe; Höttges, Jörg; Rouvé, Gerhard
JF  - On cutoff ratios of curved channels : paper presented at the 23rd Congress of the IAHR, Ottawa, Canada, August 21 - 25, 1989 / G. J. Klaassen; B. H. J.van Zanten
Y1  - 1990
N1  - Congress of the IAHR ; (23 : ; 1989.08.21-25 : ; Ottawa)
PB  - Delft Hydraulics
CY  - Delft
ER  - 
TY  - JOUR
A1  - Höttges, Jörg
A1  - Arnold, Uwe
A1  - Rouvé, Gerhard
T1  - Profiles of Mixing Coefficient in Compound Open Channel
JF  - Flow modeling and turbulence measurements : [... a collection of lectures and papers presented at the Fourth International Symposium on Refined Flow Modelling and Turbulence Measurements held in Wuhan, People's Republic of China, on September 20-23, 1990]
Y1  - 1992
SN  - 1-56032-209-8
N1  - International Symposium on Refined Flow Modelling and Turbulence Measurements <4, 1990, Wuhan>
PB  - Hemisphere Publ. Corp.
CY  - Washington, DC [u.a.]
ER  - 
TY  - JOUR
A1  - Höttges, Jörg
T1  - A Full Finite Element Solution for the Unsteady Advection-Diffusion Equation
JF  - Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell
Y1  - 1992
SN  - 185312169X
N1  - International Conference on Computational Methods in Water Resources ; (9, 1992, Denver, Colo.)
PB  - Computational Mechanics Publications [u.a.]
CY  - Southampton [u.a.]
ER  - 
TY  - JOUR
A1  - Höttges, Jörg
A1  - Feldhaus, R.
A1  - Brockhaus, T.
A1  - Rouvé, Gerhard
T1  - Finite Element Simulation of Flow and Pollution Transport applied to a Part of the River Rhine / Feldhaus, R.; J. Höttges, T. Brockhaus; G. Rouvé
JF  - Hydraulic and environmental modelling : proceedings of the Second International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine, and River Waters / [IAHR-AIRH]. Ed. by R. A. Falconer
Y1  - 1992
N1  - International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine, and River Waters ; (2, 1992, Bradford)
PB  - Ashgate
CY  - Aldershot, Hants, UK [u.a.]
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Sasse, T.
T1  - Construction and rehabilitation of landfill shafts
JF  - Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1
Y1  - 1993
N1  - International Landfill Symposium <4, 1993, Santa Margherita, Pula>
SP  - 451
EP  - 460
PB  - CISA, Environmental Sanitary Engineering Centre
CY  - Cagliari
ER  - 
TY  - BOOK
A1  - Kettern, Jürgen
T1  - Mechanical and biological treatment of waste after separate collection / R. Damiecki; J.T. Kettern. Italian Ministry of Enviroment
Y1  - 1993
N1  - SARDINIA 93 ; 2 ;  International Landfill Symposium ; (4. : ; 1993.10.11-15 : ; S. Margherita di Pula)
PB  - Eigenverlag
CY  - Caglieri
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Sasse, T.
T1  - Quality improvements in the construction of multilayer covers
JF  - Géologie et confinement des déchets toxiques : actes du symposium international, 8 - 11 juin 1993 / GEOCONFINE 93, Montpellier, France. Réd. Marcel Arnould
Y1  - 1993
SN  - 90-5410-330-2
N1  - Geoconfine <1993, Montpellier> ; Paralellt.: Geology and confinement of toxic wastes
SP  - 309
EP  - 312
PB  - Balkema
CY  - Rotterdam [u.a.]
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Sasse, T.
A1  - Konertz, K.
T1  - Preparation of mineral sealing materials for landfills by different processing technologies / Sasse, T. ; Biener, E. ; Konertz, K.
JF  - Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1
Y1  - 1993
N1  - International Landfill Symposium <4, 1993, Santa Margherita, Pula>
SP  - 275
EP  - 283
PB  - CISA, Environmental Sanitary Engineering Centre
CY  - Cagliari
ER  - 
TY  - JOUR
A1  - Höttges, Jörg
A1  - Arnold, Uwe
A1  - Rouvé, Gerhard
T1  - Measurement of transverse mixing using digital image acquisition
JF  - Mixing and transport in the environment : a memorial volume for Catherine M. Allen (1954-1991) / ed. by Keith J. Beven
Y1  - 1994
SN  - 0471941425
PB  - Wiley
CY  - Chichester [u.a.]
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Sasse, T.
T1  - Construction of composite lining systems under unfavourable weather conditions
JF  - Landfilling of waste: barriers / ed. by T. H. Christensen; R. Cossu; R. Stegmann. - 1. Aufl.
Y1  - 1994
SN  - 0419159908
SP  - 183
EP  - 200
PB  - Spon
CY  - London [u.a.]
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Wemhoff, T.
A1  - Bethke, H.
T1  - Stability and settlement problems based on the example of the Blockland landfill in Bremen
JF  - Sardinia 95 : Fifth International Landfill Symposium ; (2 - 6 October 1995, S. Margheritadi Pula - Cagliari, Sardinia, Italy) ; proceedings / coord.: Thomas H. Christensen ... - Bd. 2 : Siting, lining, drainage & landfill mechanics
Y1  - 1995
N1  - International Landfill Symposium <5, 1995, Santa Margherita, Pula>
SP  - 843
EP  - 853
PB  - CISA, Environmental Sanitary Engineering Centre
CY  - Cagliari
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Boyken, P.
A1  - Sasse, T.
T1  - Integrated dredged material management system of Bremen-Seehausen
JF  - Sardinia 97 : proceedings ; [13 - 17 October 1997, S. Margherita di Pula - Cagliari, Sardinia, Italy] / Sixth International Landfill Symposium. Ed.: Thomas H. Christensen... - Bd. 5 : Landfill regulations, waste characteristics, landfilling in middle and lower income countries, industrial wastes and monolandfills
Y1  - 1997
N1  - International Landfill Symposium <6, 1997, Santa Margherita, Pula>
SP  - 497
EP  - 502
PB  - CISA, Environmental Sanitary Engineering Centre
CY  - Cagliari
ER  - 
TY  - JOUR
A1  - Gossla, Ulrich
A1  - Sato, R.
T1  - Present production circumstances of aggregate in Germany / Sato, R.; Gossla, U.
JF  - Cement & Concrete (1998)
Y1  - 1998
N1  - auf Japanisch
SP  - 146
EP  - 153
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Boyken, P.
A1  - Sasse, T.
A1  - Arnold, J.
T1  - Geotechnical aspects of the construction of the integrated harbour sludge management system in Bremen-Seehausen / P. Boyken ;  E. Biener ; T. Sasse ; J. Arnold
JF  - Geotechnical engineering for transportation infrastructure : proceedings of the twelfth European Conference on Soil Mechanics and Geotechnical Engineering, Amsterdam, Netherlands, 7 - 10 June 1999 ; theory and practice, planning and design, construction and maintenance. - Vol. 2
Y1  - 1999
SN  - 90-5809-049-3
N1  - European Conference on Soil Mechanics and Geotechnical Engineering <12, 1999, Amsterdam>
SP  - 909
EP  - 914
PB  - Balkema
CY  - Rotterdam
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Sasse, T.
A1  - Arnold, J.
A1  - Woltering, S.
T1  - New treatment of harbour sludge in Bremen and Bremerhaven  /  E. Biener ; T. Sasse ; J. Arnold ; S. Woltering ; N. Binder
JF  - Characterisation and treatment of sediments : Antwerpen, Belgium, September 15 - 17, 1999 ; [preceded by 12th International Harbour Congress] ; proceedings / CATS 4. Ed.: G. De Schutter. Organized by: Technologisch Instituut, Koninklijke Vlaamse Ingenieursvereniging
Y1  - 1999
SN  - 9076019118
N1  - CATS <4, 1999, Anvers>
SP  - 115
EP  - 122
PB  - Technolog. Inst.
CY  - Anvers
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Sasse, T.
A1  - Bökers, H.
T1  - Preliminary or final capping of sanitary landfills? : Technical and economical aspects
JF  - Sardinia 99 : proceedings / Seventh International Waste Management and Landfill Symposium, [4 - 8 October 1999, S. Margherita di Pula, Cagliari, Sardinia, Italy]. Ed.: Thomas H. Christensen. -  Bd. 3 : Barriers, waste mechanics and landfill design
Y1  - 1999
N1  - International Waste Management and Landfill Symposium <7, 1999, Cagliari>
SP  - 287
EP  - 294
PB  - CISA, Environmental Sanitary Engineering Centre
CY  - Cagliari
ER  - 
TY  - CHAP
A1  - Groß, Rolf Fritz
A1  - Hecken, M.
A1  - Renz, Ulrich
ED  - Dittler, A.
ED  - Hemmer, G.
ED  - Kasper, G.
T1  - Hot gas filtration with ceramic filter candles: experimental and numerical investigations on fluid flow during element cleaning
T2  - High temperature gas cleaning. Vol. 2
N2  - Ceramic hot gas filters are widely used in combined cycles based on pressurised fluidised beds. They fulfil most of the demands with respect to cleaning efficiency and long time durability, but their operation regarding the consumption of pulse gas and energy still has to be optimised. Experimental investigations were carried out to measure the flow field, the pressure and the gas temperature inside the filter candle during pulse jet cleaning. These results are compared with the results of a numerical procedure based on a solution of the two - dimensional conservation equations for momentum and energy. The observed difficulties handling different flow regimes like highly turbulent flow as well as Darcy flow simultaneously are discussed.
KW  - 20 fossil-fueled power plants
KW  - hot gas cleanup
KW  - ceramics
KW  - filtration
KW  - gas flow
Y1  - 1999
SN  - 3-9805220-1-6
N1  - 4th International Symposium and Exhibition on Gas Cleaning at High Temperatures, 22.-24.09.1999, Karlsruhe
SP  - 862
EP  - 873
PB  - KIT Institut für Mechanische Verfahrenstechnik und Mechanik
CY  - Karlsruhe
ER  - 
TY  - JOUR
A1  - Jochim, Haldor E.
T1  - Charging rail operators for delays – how not to do it
JF  - Networks for mobility : International Symposium, September 18 - 20, 2002, Stuttgart, Germany ; proceedings / University of Stuttgart, Centre of Transporation Research (FOVUS). W. Möhlenbrink ... (eds.)
Y1  - 2002
SN  - 3893010858
N1  - International Symposium ; (2002.09.18-20 : ; Stuttgart)
PB  - FOVUS
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Bethke, H.
A1  - Sasse, T.
A1  - Wernhoff, T.
T1  - Alternative landfill capping using locally available recycled material
JF  - Land contamination & reclamation. 14 (2003), H. 4
Y1  - 2003
SN  - 0967-0513
SP  - 419
EP  - 427
ER  - 
TY  - JOUR
A1  - Biener, Ernst
A1  - Sasse, T.
A1  - Wernhoff, T.
T1  - Using harbour dredged material for combination sealing of the former Bockhorner Weg disposal site in Bremen, Germany
JF  - Proceedings of the International Harbour Congress. 13 (2003)
Y1  - 2003
N1  - International Harbour Congress <13, 2003, Antwerpen>
SP  - 101
EP  - 109
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Ziller, Claudia
A1  - Hortmanns, M.
T1  - Ventilation of double facades by external dynamic wind pressure
T2  - 11th International Conference on Wind Engineering. 1
Y1  - 2003
SP  - 721
EP  - 730
PB  - The Wind Science and Engineering Research Center
CY  - Lubbock, Tex.
ER  - 
TY  - CHAP
A1  - Ziller, Claudia
A1  - Döring, Bernd
ED  - Carmeliet, J.
ED  - Hens, H.
ED  - Vermeir, G.
T1  - Influence of the external dynamic wind pressure on the ventilation of double facades
T2  - Research in building physics: proceedings of the Second International Conference on Building Physics : Leuven, Belgium, 14-18 September 2003
Y1  - 2003
SN  - 9058095657, 9789058095657
SP  - 527
EP  - 533
PB  - Taylor and Francis
CY  - Hoboken
ER  - 
TY  - JOUR
A1  - Jochim, Haldor E.
T1  - A traffic resistance model of long-distance travel
JF  - Networks for mobility : 2nd international symposium, September 29 - October 1, 2004, Stuttgart, Germany ; proceedings ; abstracts and CD-ROM / [2nd International Symposium on Networks for Mobility]. FOVUS, Centre of Transportation Research, University of
Y1  - 2004
SN  - 3-89301-180-3
N1  - International Symposium on Networks for Mobility (2, 2004, Stuttgart)
PB  - FOVUS
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Sedlacek, Gerhard
T1  - Improvement of thermal comfort in light weight buildings made of steel with new concepts for slab systems
T2  - 10th Nordic Steel Construction Conference, Copenhagen, Denmark 7-9. June 2004: NSCC 2004 : proceedings
Y1  - 2004
SP  - 35
EP  - 44
PB  - Danish Steel Inst.
CY  - Copenhagen
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - Load Carrying Capacity of Joints with Dowel Type Fasteners in Solid Wood Panels
T2  - Proceedings. CIB-W18 Meeting 2006, Florence, Italy 2006
Y1  - 2006
SN  - 0945-6996
N1  - Paper 39-7-5
SP  - 1
EP  - 10
ER  - 
TY  - RPRT
A1  - Conan, Yulian
A1  - D'Haeyer, R.
A1  - Béguin, P.
A1  - Döring, Bernd
A1  - Kuhnhenne, Markus
A1  - Bayo, E.
T1  - Steel in low-rise building : a symbiosis of cold formed sections and light rolled profiles : final report. Contract-No. 7215-PP/070. EUR 22080 en
Y1  - 2006
SN  - 92-79-02082-X
PB  - Office for Official Publications of the European Communities
CY  - Luxembourg
ER  - 
TY  - JOUR
A1  - Kolymbas, Dimitrios
A1  - Fellin, W.
A1  - Kirsch, Ansgar
T1  - Squeezing due to stress relaxation in foliated rock
JF  - International journal for numerical and analytical methods in geomechanics
Y1  - 2006
U6  - http://dx.doi.org/10.1002/nag.530
SN  - 1096-9853 (E-Journal); 0363-9061 (Print)
VL  - Vol. 30
IS  - Iss. 13
SP  - 1357
EP  - 1367
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - Edge Joints with Dowel Type Fasteners in Cross Laminated Timber
T2  - Proceedings. CIB-W18 Meeting 2007, Bled, Slovenia 2007
Y1  - 2007
SN  - 0945-6996
N1  - Paper 40-7-2
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Stepkes, Hermann
A1  - Zimmermann, J.
A1  - Müller, Karsten
A1  - Siekmann, Marko
A1  - Pinnekamp, Josef
T1  - Economical rehabilitation of sewer systems by ground penetration radar investigations
T2  - Strategic asset management of water supply and wastewater infrastructures : invited papers from the 2nd IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October [17 - 19] 2007 / ed. by Helene Alegre and Maria do Céu Almeida
Y1  - 2007
SN  - 9781843391869
SP  - 501
EP  - 520
PB  - IWA Publ.
CY  - London
ER  - 
TY  - CHAP
A1  - Spasov, Yulian
A1  - Döring, Bernd
A1  - Griffin, Allan
T1  - Exploiting the thermal mass in an energy efficient building - a comparison exercise between IES Apache and TRNSYS models
T2  - Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings
Y1  - 2007
SN  - 978-952-99898-2-9
SP  - 1
EP  - 7
CY  - Helsinki
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Feldmann, Markus
A1  - Kuhnhenne, Markus
T1  - An innovative thermally activated light-weight steel deck system - numerical investigations and practical tests
T2  - Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings
Y1  - 2007
SN  - 978-952-99898-2-9
SP  - 1
EP  - 8
CY  - Helsinki
ER  - 
TY  - CHAP
A1  - Müller, Karsten
A1  - Hüben, Susanne
T1  - From rehabilitation strategy up to formation of lots : implementation of a computer-aided decision support system
T2  - 11th International Conference on Urban Drainage, Edinburgh, Scotland, UK, 31st August to 5th September 2008
Y1  - 2008
ER  - 
TY  - RPRT
A1  - Kesti, J.
A1  - Burstrand Knutsson, H.
A1  - Salvatore, W.
A1  - Saouridis, C.
A1  - Odrieres Meré, J.
A1  - Georgi, H.
A1  - Casajus, A.
A1  - Butz, C.
A1  - Schneider, R.
A1  - Döring, Bernd
T1  - Dissemination of knowledge in the use of steel-intensive dry construction systems in housing : final report. Contract No RFS2-CT-2004-00036. EUR 22849 EN
Y1  - 2008
SN  - 978-92-79-05973-5
PB  - Office for Official Publications of the European Communities
CY  - Luxembourg
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Feldmann, Markus
A1  - Kuhnhenne, Markus
A1  - Hellberg, Jan
T1  - Implementing a thermal activation system into a light-weight steel deck element
T2  - Eurosteel 2008 : 5th European Conference on Steel and Composite Structures ; research, practice, new materials ; 3rd to 5th September 2008, Graz, Austria / ed. by Robert Ofner ...
Y1  - 2008
SN  - 92-0147-000-90
SP  - 941
EP  - 946
PB  - ECCS, European Convention for Construction Steelwork
CY  - Brussels
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Hildebrandt, Arndt
A1  - Oertel, Mario
A1  - Schlenkhoff, Andreas
A1  - Schlurmann, Torsten
ED  - McKee Smith, Jane
T1  - Bore propagation over a submerged horizontal plate by physical and numerical simulation
T2  - Coastal engineering 2008 : proceedings of the 31st international conference; Hamburg, Germany, 31 August - 5 September 2008 ; Vol. 4
Y1  - 2008
SN  - 9814277401 ; 9789814277402
SP  - 3542
EP  - 3553
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Schlenkhoff, Andreas
ED  - Pagliara, Stefano
T1  - Optimization of the reaeration potential on embankment stepped spillways in skimming flow regime
T2  - Hydraulic structures : proceedings of the second International Junior Researcher and Engineer Workshop on Hydraulic Structures, Pisa, Italy, 30 July-1 August 2008
Y1  - 2008
SN  - 978-88-8492-568-8
SP  - 97
EP  - 106
ER  - 
TY  - CHAP
A1  - Müller, Karsten
A1  - Fischer, B.
T1  - Objective condition assessment of sewer systems
T2  - Strategic asset management of water supply and wastewater infrastructures : invited papers from the 2nd IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October [17 - 19] 2007 / ed. by Helene Alegre and Maria do Céu Almeida
Y1  - 2009
SN  - 9781843391869
SP  - 521
EP  - 534
PB  - IWA Publ.
CY  - London
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Schlenkhoff, Andreas
A1  - Oertel, M.
T1  - Self-aerated skimming flow on embankment stepped spillways
T2  - Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada
Y1  - 2009
SN  - 9789078046080
SP  - 1 CD-ROM
ER  - 
TY  - CHAP
A1  - Oertel, M.
A1  - Bung, Daniel B.
A1  - Schlenkhoff, Andreas
T1  - Flash flood awareness and prevention
T2  - Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada
Y1  - 2009
SN  - 9789078046080
SP  - 1 CD-ROM
ER  - 
TY  - CHAP
A1  - Schlenkhoff, Andreas
A1  - Bung, Daniel B.
T1  - Prediction of oxygen transfer in self-aerated skimming flow on embankment stepped spillways
T2  - Water engineering for sustainable environment : 33rd IAHR congress ; 9 - 14 August 2009, Vancouver, British Columbia, Canada
Y1  - 2009
SN  - 9789078046080
SP  - 1 CD-ROM
ER  - 
TY  - CHAP
A1  - Fellin, Wolfgang
A1  - King, Julian
A1  - Kirsch, Ansgar
A1  - Oberguggenberger, Michael
T1  - Uncertainty modelling and sensitivity analysis of tunnel face stability
T2  - Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...
Y1  - 2009
SN  - 978-0-415-47557-0
SP  - 112
EP  - 114
PB  - CRC Pr.
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
T1  - Experimental and numerical investigation of the face stability of shallow tunnels in sand
T2  - Safe tunnelling for the city and environment : proceedings of the World Tunnel Congress 2009, Budapest, Hungary, 23 to 28 September 2009 / organised by International Tunnelling and Underground Space Association ...
Y1  - 2009
SP  - 1
EP  - 8
PB  - Hungarian Tunnelling Association
CY  - Budapest
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Oertel, M.
A1  - Schlenkhoff, A.
A1  - Schlurmann, Torsten
ED  - Obrusnik, Ivan
T1  - Flash flood awareness and prevention in Germany
T2  - Early warning for flash floods : international workshop, Praha 2011 : workshop proceedings
Y1  - 2010
SN  - 978-80-86690-91-9
SP  - 34
EP  - 40
ER  - 
TY  - CHAP
A1  - Heinz, G.
A1  - Oertel, Mario
A1  - Bung, Daniel B.
ED  - Janssen, Robert
T1  - Investigations on a cooling water system for a gas tubine facility concerning air vortexes and sediment transport
T2  - Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010
Y1  - 2010
SN  - 9781742720159
SP  - 109
EP  - 116
PB  - School of Civil Engineering, The University of Queensland
CY  - Brisbane
ER  - 
TY  - CHAP
A1  - Kerpen, N. B.
A1  - Bung, Daniel B.
A1  - Schlurmann, Torsten
ED  - Janssen, Robert
T1  - Physical model investigations of ships passing through a lock
T2  - Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010
Y1  - 2010
SN  - 9781742720159
SP  - 93
EP  - 100
PB  - School of Civil Engineeering, The University of Queensland
CY  - Brisbane
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Schlenkhoff, Andreas
T1  - Self-aerated skimming flow on embankment stepped spillways : the effect of additional micro-roughness on energy dissipation and oxygen transfer
T2  - Proceedings from first IAHR European congress : May 2010, Edinburgh
Y1  - 2010
SN  - 9780956595102
SP  - Artikelkennnummer HSIIId
PB  - Heriot-Watt University, School of the Built Environment
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Kerpen, N. B.
A1  - Bung, Daniel B.
A1  - Schlurmann, Torsten
T1  - Physical model investigations of pressure distributions next to ships passing through a lock
T2  - 5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010
Y1  - 2010
SN  - 978-7-5618-3671-2
SP  - 514
EP  - 519
PB  - Univ. Press
CY  - Tianjin
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
T1  - A comparative study of self-aerated stepped spillway and smooth invert chute flow: the effect of step-induced macro roughness
T2  - 5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010
Y1  - 2010
SN  - 978-7-5618-3671-2
SP  - 451
EP  - 456
PB  - Univ. Press
CY  - Tianjin
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
T1  - Numerical investigation of the face stability of shallow tunnels in sand
T2  - Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...
Y1  - 2010
SN  - 978-0-415-59239-0
SP  - 779
EP  - 784
PB  - Taylor and Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
A1  - Marcher, Thomas
T1  - Numerical prediction of time-dependent rock swelling based on an example of a major tunnel project in Ontario/Canada
T2  - Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...
Y1  - 2010
SN  - 978-0-415-59239-0
SP  - 297
EP  - 302
PB  - Taylor and Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Kirsch, Ansgar
T1  - Experimental investigation of the face stability of shallow tunnels in sand
JF  - Acta Geotechnica
N2  - Various models have been proposed for the prediction of the necessary support pressure at the face of a shallow tunnel. To assess their quality, the collapse of a tunnel face was modelled with small-scale model tests at single gravity. The development of the failure mechanism and the support force at the face in dry sand were investigated. The observed displacement patterns show a negligible influence of overburden on the extent and evolution of the failure zone. The latter is significantly influenced, though, by the initial density of the sand: in dense sand a chimney-wedge-type collapse mechanism developed, which propagated towards the soil surface. Initially, loose sand did not show any discrete collapse mechanism. The necessary support force was neither influenced by the overburden nor the initial density. A comparison with quantitative predictions by several theoretical models showed that the measured necessary support pressure is overestimated by most of the models. Those by Vermeer/Ruse and Léca/Dormieux showed the best agreement to the measurements.
Y1  - 2010
U6  - http://dx.doi.org/10.1007/s11440-010-0110-7
SN  - 1861-1125
VL  - 5
IS  - 1
SP  - 43
EP  - 62
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Fellin, Wolfgang
A1  - King, Julian
A1  - Kirsch, Ansgar
A1  - Oberguggenberger, Michael
T1  - Uncertainty modelling and sensitivity analysis of tunnel face stability
JF  - Structural safety
N2  - This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.
Y1  - 2010
U6  - http://dx.doi.org/10.1016/j.strusafe.2010.06.001
SN  - 0167-4730
VL  - 32
IS  - 6
SP  - 402
EP  - 410
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Siekmann, Thomas
A1  - Müller, Karsten
T1  - Adaptive potential of the stormwater management in urban areas faced by the climate change
T2  - 12th International Conference on Urban Drainage, Porto Alegre/Brazil, 11-16 September 2011
Y1  - 2011
ER  - 
TY  - JOUR
A1  - Bung, Daniel B.
T1  - Developing flow in skimming flow regime on embankment stepped spillways
JF  - Journal of hydraulic research
Y1  - 2011
SN  - 1814-2079 (E-Journal); 0022-1686 (Print)
VL  - Vol. 49
IS  - Iss. 5
SP  - 639
EP  - 648
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
T1  - Non-intrusive measuring of air-water flow properties in self-aerated stepped spillway flow
T2  - Balance and uncertainty - water in a changing world :  proceedings of the 34th IAHR world congress ; 33rd Hydrology and Water Resources Symposium ; 10th Conference on Hydraulics in Water Engineering ; 26 June - 1 July 2011, Brisbane, Australia
Y1  - 2011
SN  - 978-0-85825-868-6
SP  - 2380
EP  - 2387
ER  - 
TY  - CHAP
A1  - Ahmed, H.
A1  - Schlenkhoff, A.
A1  - Bung, Daniel B.
T1  - Hydrodynamic characteristics of vertical slotted wall breakwaters
T2  - Balance and uncertainty - water in a changing world :  proceedings of the 34th IAHR world congress ; 33rd Hydrology and Water Resources Symposium ; 10th Conference on Hydraulics in Water Engineering ; 26 June - 1 July 2011, Brisbane, Australia
Y1  - 2011
SN  - 978-0-85825-868-6
SP  - 1179
EP  - 1186
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Kuhnhenne, Markus
A1  - Feldmann, Markus
T1  - Floor systems - key elements for sustainable multi-storey buildings
T2  - SB11 Helsinki World Sustainable Building Conference : 18. - 21.10.2011
Y1  - 2011
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Kirstein, Simon
A1  - Müller, Karsten
A1  - Walecki-Mingers, Mark
A1  - Deserno, Thomas M.
T1  - Robust adaptive flow line detection in sewer pipes
JF  - Automation in construction
N2  - As part of a novel approach to automatic sewer inspection, this paper presents a robust algorithm for automatic flow line detection. A large image repository is obtained from about 50,000 m sewers to represent the high variability of real world sewer systems. Automatic image processing combines Canny edge detection, Hough transform for straight lines and cost minimization using Dijkstra's shortest path algorithm. Assuming that flow lines are mostly smoothly connected horizontal structures, piecewise flow line delineation is reduced to a process of selecting adjacent line candidates. Costs are derived from the gap between adjacent candidates and their reliability. A single parameter α enables simple control of the algorithm. The detected flow line may precisely follow the segmented edges (α = 0.0) or minimize gaps at joints (α = 1.0). Both, manual and ground truth-based analysis indicate that α = 0.8 is optimal and independent of the sewer's material. The algorithm forms an essential step to further automation of sewer inspection.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.autcon.2011.05.009
SN  - 1872-7891 (E-Journal) ; 0926-5805 (Print)
IS  - 21
SP  - 24
EP  - 31
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Ganegedara, H.
A1  - Alahakoon, D.
A1  - Mashford, J.
A1  - Paplinski, A.
A1  - Müller, Karsten
A1  - Deserno, T. M.
T1  - Self organising map based region of interest labelling for automated defect identification in large sewer pipe image collections
T2  - The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)
Y1  - 2012
SN  - 978-1-4673-1490-9
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Initial stage of two-dimensional dam-break waves: laboratory versus VOF
JF  - Journal of hydraulic research
N2  - Since several decades, dam-break waves have been of main research interest. Mathematical approaches have been developed by analytical, physical and numerical models within the past 120 years. During the past 10 years, the number of research investigations has increased due to improved measurement techniques as well as significantly increased computer memories and performances. In this context, the present research deals with the initial stage of two-dimensional dam-break waves by comparing physical and numerical model results as well as analytical approaches. High-speed images and resulting particle image velocimetry calculations are thereby compared with the numerical volume-of-fluid (VOF) method, included in the commercial code FLOW-3D. Wave profiles and drag forces on placed obstacles are analysed in detail. Generally, a good agreement between the laboratory and VOF results is found.
KW  - VOF
KW  - PIV
KW  - physical model
KW  - numerical model
KW  - drag force
KW  - dam-break
Y1  - 2012
U6  - http://dx.doi.org/10.1080/00221686.2011.639981
SN  - 1814-2079 (E-Journal); 0022-1686 (Print)
VL  - 50
IS  - 1
SP  - 89
EP  - 97
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Feldmann, Markus
A1  - Pyschny, D.
A1  - Döring, Bernd
A1  - Kuhnhenne, Markus
T1  - Life cycle assessment of steel constructions
T2  - Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012
Y1  - 2012
SN  - 978-0-203-10336-4
SP  - 321
PB  - Taylor and Francis
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Kuhnhenne, Markus
A1  - Döring, Bernd
A1  - Pyschny, Dominik
A1  - Feldmann, Markus
T1  - Energy efficient sandwich construction
T2  - Proceedings of the VI International Congress on Architectural Envelopes : 20.6. - 22.6.2012, San Sebastian, Spain
Y1  - 2012
SP  - 277
EP  - 285
PB  - ICAE
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Sun, Q.
A1  - Meireles, I.
A1  - Matos, J.
A1  - Viseu, T.
T1  - USBR type III stilling basin performance for steep stepped spillways
T2  - Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto
Y1  - 2012
SN  - 978-989-8509-01-7
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Characteristics of cross-bar block ramp flows
T2  - Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto
Y1  - 2012
SN  - 978-989-8509-01-7
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
T1  - Sensitivity of phase detection techniques in aerated chute flows to hydraulic design parameters
T2  - 2nd European IAHR congress : 27. - 29. June 2012, München
Y1  - 2012
SN  - 978-3-943683-03-5
SP  - Artikelkennnummer: B15
PB  - Lehrstuhl u. Versuchsanst. für Wasserbau u. Wasserwirtschaft d. TU München
CY  - München
ER  - 
TY  - CHAP
A1  - Schlurmann, Torsten
A1  - Bung, Daniel B.
T1  - Experimental investigation of flow-induced radial gate vibrations at Lower Subansiri dam
T2  - Sixth Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : JOINT 2012 : 23.-29.9.2012, Keelung
Y1  - 2012
SP  - 7
EP  - 14
ER  - 
TY  - JOUR
A1  - Bung, Daniel B.
T1  - Non-intrusive detection of air–water surface roughness in self-aerated chute flows
JF  - Journal of hydraulic research
Y1  - 2013
SN  - 1814-2079 (E-Journal); 0022-1686 (Print)
VL  - Vol. 51
IS  - Iss. 3
SP  - 322
EP  - 329
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Pagliara, S.
T1  - Proceedings of the International Workshop on Hydraulic Design of Low-Head Structures : Aachen, Germany, February, 20-22, 2013 /  D. Bung ; S. Pagliara (eds.)
Y1  - 2013
SN  - 978-3-939230-04-5
PB  - Bundesanst. für Wasserbau
CY  - Karlsruhe
ER  - 
TY  - JOUR
A1  - Döring, Bernd
A1  - Kendrick, C.
A1  - Lawson, R. M.
T1  - Thermal capacity of composite floor slabs
JF  - Energy and buildings
Y1  - 2013
SN  - 1872-6178 (E-Journal); 0378-7788 (Print)
VL  - Vol. 67
SP  - 531
EP  - 539
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Comparison of 2D dam-break waves with VOF and SPH method
T2  - Proceedings of the 35th IAHR world congress : 8.-13.9.2013, Chengdu, China
Y1  - 2013
SP  - Artikelkennnummer: A11113
PB  - Tsinghua Univ. Press
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
T1  - Air-water surface roughness in self-aerated stepped spillway flows
T2  - 35th IAHR world congress : 8.-13.9.2013, Chengdu, China
Y1  - 2013
SP  - Artikelkennnummer: A11045
PB  - Tsinghua Univ. Press
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Gogolin, C.
A1  - Carvalho, R.
A1  - Bung, Daniel B.
A1  - Matos, J.
T1  - Experimental and numerical investigation of steady and unsteady flows in roughened channels with cross beams
T2  - 35th IAHR world congress : 8.-13.9.2013, Chengdu, China
Y1  - 2013
SP  - Artikelkennnummer: A10837C
PB  - Tsinghua Univ. Press
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans-Joachim
T1  - Joints with Dowel Type Fasteners in CLT structures
T2  - Focus solid timber solutions : European Conference on Cross Laminated Timber (CLT); May 21-22, 2013, Graz University of Technology, Austria
Y1  - 2013
SN  - 978-1-85790-181-8 ; 1-85790-181-9
SP  - 119
EP  - 134
ER  - 
TY  - RPRT
A1  - Lawson, R.M.
A1  - Baddoo, N.R.
A1  - Vanier, G.
A1  - Döring, Bernd
A1  - Kuhnhenne, M.
A1  - Nieminen, J.
A1  - Beguin, P.
A1  - Herbin, S.
A1  - Caroli, G.
A1  - Adetunji, I.
A1  - Kozlowski, A.
T1  - Renovation of buildings using steel technologies (Robust) - EUR 25335
N2  - Robust addresses the renovation and improvement of existing residential, industrial and commercial buildings using steel-based technologies, focusing on techniques such as over-cladding, over-roofing and roof-top extensions. Steel-intensive renovation techniques currently on the market were reviewed. Performance criteria were developed for over-cladding systems meeting current regulatory standards, with guidelines on how to achieve appropriate levels of air-tightness.
KW  - iron and steel industry
KW  - steel
KW  - materials technology
KW  - building materials
KW  - metal structure
KW  - building safety
KW  - testing
KW  - industrial research
Y1  - 2013
SN  - 978-92-79-24950-1
U6  - http://dx.doi.org/10.2777/97860
SN  - 1831-9424
PB  - Publications Office of the European Union
CY  - Luxembourg
ER  - 
TY  - RPRT
A1  - Feldmann, M.
A1  - Kuhnhenne, M.
A1  - Döring, Bernd
A1  - Pyschny, D.
A1  - Lawson, R.M.
A1  - Chuter, R.D.
A1  - Boudjabeur, S.
A1  - Lecomte-Labory, F.
A1  - Airaksinen, M.
A1  - Heikkinen, J.
A1  - Laamanen, J.
A1  - Albart, P.
A1  - D'Haeyer, R.
A1  - Chica, J.A.
A1  - Maseda, J.M.
A1  - Amundarain, A.
A1  - Rips, M.O.
A1  - Nuñez, J.A.
A1  - Macías, O.
A1  - Beguin, P.
A1  - Ben Larbi, A.
T1  - Energy and thermal improvements for construction in steel (ETHICS) - EUR 26010
N2  - ETHICS is concerned with evaluating, measuring and making improvements in the thermal and energy performance of steel-clad and steel-framed buildings. It addresses basic building physics performance at a laboratory and full-scale level, and the preparation of design guidance for commercial, industrial and residential buildings. It includes the development of design tools to assist users in assessing whole-building performance, and calibrates these tools against whole-building measurements, which will be obtained from this research. Opportunities for renewable energy and other energy-saving features will be assessed. This project focuses on objectives that are of particular interest for the design of new steel constructions regarding energy efficiency. ETHICS investigates the as-built performance by on-site tests regarding air tightness and heat transfer properties of the building envelope and by monitoring the energy consumption and thermal comfort of selected up-to-date steel buildings. As energy efficiency is a key requirement for design and construction of buildings in the future, this project provides well-founded scientific data, which prove the high energy performance of current steel constructions and work out details for further improvements to maintain and extend the position of steel products in the construction sector.
KW  - steel
KW  - metal structure
KW  - building technique
KW  - energy efficiency
KW  - thermal insulation
KW  - industrial research
KW  - research report
Y1  - 2013
SN  - 978-92-79-30789-8
U6  - http://dx.doi.org/10.2777/17106
SN  - 1831-9424
PB  - Publications Office of the European Union
CY  - Luxembourg
ER  - 
TY  - JOUR
A1  - Leandro, J.
A1  - Bung, Daniel B.
A1  - Carvalho, R.
T1  - Measuring void fraction and velocity fields of a stepped spillway for skimming flow using non-intrusive methods
JF  - Experiments in fluids
Y1  - 2014
U6  - http://dx.doi.org/10.1007/s00348-014-1732-6
SN  - 0723-4864 (Print) ; 1432-1114 (Online)
IS  - 55
SP  - Art. 1732
PB  - Springer Nature
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Oertel, Mario
T1  - Manipulation of non-aerated cavity flow on a stepped spillway model
T2  - 3rd European IAHR Congress : April 14 – 16, 2014, Porto
Y1  - 2014
PB  - Univ. of Porto
CY  - Porto
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
A1  - Felber, W.
A1  - Marcher, Thomas
A1  - Fuchs, W.
T1  - Geotechnical challenges during design and construction of a ski resort in Azerbaijan
T2  - Geotechnics of roads and railways : proceedings of the 15th Danube - European Conference on Geotechnical Engineering : 9-11 September 2014, Vienna, Austria
Y1  - 2014
SN  - 978‐3‐902593‐01‐6
SP  - 757
EP  - 762
PB  - ÖIAV - Österreichischer Ingenieur- und Architekten-Verein
CY  - Wien
ER  - 
TY  - CHAP
A1  - Chanson, Hubert
A1  - Bung, Daniel B.
A1  - Matos, J.
T1  - Stepped spillways and cascades
T2  - Energy dissipation in hydraulic structures / Hubert Chanson (ed.)
Y1  - 2015
SN  - 978-1-138-02755-8 (print) ; 978-1-315-68029-3 (e-Book)
SP  - 45
EP  - 64
PB  - CRC Press
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
ED  - Rowinski, Pawel
T1  - Laboratory models of free-surface flows
T2  - Rivers - physical, fluvial and environmental processes
N2  - Hydraulic modeling is the classical approach to investigate and describe complex fluid motion. Many empirical formulas in the literature used for the hydraulic design of river training measures and structures have been developed using experimental data from the laboratory. Although computer capacities have increased to a high level which allows to run complex numerical simulations on standard workstation nowadays, non-standard design of structures may still raise the need to perform physical model investigations. These investigations deliver insight into details of flow patterns and the effect of varying boundary conditions. Data from hydraulic model tests may be used for calibration of numerical models as well. As the field of hydraulic modeling is very complex, this chapter intends to give a short overview on capacities and limits of hydraulic modeling in regard to river flows and hydraulic structures only. The reader shall get a first idea of modeling principles and basic considerations. More detailed information can be found in the references.
KW  - Physical modeling
KW  - Similitude
KW  - Open channels
KW  - Hydraulic structures
Y1  - 2015
SN  - 978-3-319-17718-2 ; 978-3-319-17719-9
U6  - http://dx.doi.org/10.1007/978-3-319-17719-9_9
SP  - 213
EP  - 228
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Hybrid investigation of air transport processes in moderately sloped stepped spillway flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Balmes, Jan P.
A1  - Bung, Daniel B.
T1  - Numerical simulation of erosion processes on crossbar block ramps
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
T1  - Image processing for bubble image velocimetry in self-aerated flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Lopes, Pedro
A1  - Bung, Daniel B.
A1  - Leandro, Jorge
A1  - Carvalho, Rita F.
T1  - The effect of cross-waves in physical stepped spillway models
T2  - E-proceedings of the 36th IAHR World Congress ; 28 June - 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 9
ER  - 
TY  - JOUR
A1  - Döring, Bernd
A1  - Reger, Vitali
A1  - Kuhnhenne, Markus
A1  - Feldmann, Markus
A1  - Kesti, Jyrki
A1  - Lawson, Mark
A1  - Botti, Andrea
T1  - Steel solutions for enabling zero-energy buildings
JF  - Steel Construction - Design
and Research
Y1  - 2015
U6  - http://dx.doi.org/10.1002/stco.201510029
SN  - 1867-0539
N1  - The 13th Nordic Steel Construction Conference, Tampere, 2015 (NSCC-2015)
VL  - 8
IS  - 3
SP  - 194
EP  - 200
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - RPRT
A1  - Kesti, Jyrki
A1  - Mononen, Tarmo
A1  - Lautso, Petteri
A1  - Döring, Bernd
A1  - Reger, Vitali
A1  - Holopainen, R.
A1  - Jung, N.
A1  - Shemeikka, J.
A1  - Nieminen, J.
A1  - Reda, F.
A1  - Lawson, Mark
A1  - Botti, Andrea
A1  - Hall, R.
A1  - Zold, A.
A1  - Buday, T.
T1  - Zero energy solutions for multifunctional steel intensive commercial buildings (ZEMUSIC) - EUR 27627
N2  - The broad commercial objective of this project was the sustainable value creation in steel building technology by addressing the ways in which significant energy reductions can be made in the operation phase of multi-storey commercial buildings. A review on energy efficient commercial buildings in Europe has been carried out consisting of several case studies from different countries. The project included development of zero-energy concepts for reducing energy demand as well as concepts for heating, cooling and ventilation systems by utilising renewable energy sources in three different climates. Also alternative structural frame solutions were developed and analyzed in respect of structural and MEP (mechanical, electrical and plumbing solutions) features. An innovative long span floor system with integrated MEP routings promises a cost effective alternative for sophisticated ventilation distribution and radiant heating and cooling systems, allowing for high energy efficiency and high quality interior climate. The report includes also review of best architectural practices for integrated renewable energy solutions including different design strategies for building facades of zero energy buildings. Interesting results and design basis are also presented for steel energy pile concept, where structural foundation piles are utilized for ground energy harvesting. Life cycle cost calculations for near zero energy office building based on developed technologies show that a near zero energy construction is also profitable. The results and work methods of the project have been summarized in the form of design guidance that offers designers the knowledge gained in a form that can be easily understood.
KW  - steel
KW  - iron and steel industry
KW  - resistance of materials
KW  - materials technology
KW  - metal structure
KW  - research project
KW  - building industry
KW  - building materials
KW  - renewable energy
KW  - designs and models
KW  - research report
KW  - guide
Y1  - 2015
SN  - 978-92-79-54071-4
U6  - http://dx.doi.org/10.2777/111520
SN  - 1831-9424
N1  - Enthalten: Appendix Design Guide: Deliverable Report WP6.4 Design Guide for steel intensive nearly zero office buildings (83 Seiten)
PB  - Publications Office of the European Union
CY  - Luxembourg
ER  - 
TY  - JOUR
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Stability and scour development of bed material on crossbar block ramps
JF  - International journal of sediment research
N2  - Block ramps are ecologically oriented drop structures with adequate energy dissipation and partially moderate flow velocities. A special case is given with crossbar block ramps, where the upstream and downstream level difference is reduced by a series of basins. To prevent the total structure from failing, the stability of single boulders within the crossbars and the bed material in between must be guaranteed. The present paper addresses the stability of bed material and scour development for various flow regimes. Any bed material erosion may affect the stability of the crossbar boulders, which in turn can result in major damages of the ramp. Therefore new design approaches are developed to choose an appropriate bed material size and to avoid failures of crossbar block ramp structures.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.ijsrc.2014.12.003
SN  - 1001-6279
VL  - 30
IS  - 4
SP  - 344
EP  - 350
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bayon, Arnau
A1  - Valero, Daniel
A1  - Garcia-Bartual, Rafael
A1  - Vallés-Morán, Francisco José
A1  - López-Jiménez, P. Amparo
T1  - Performance assessment of OpenFOAM and FLOW-3D in the numerical modeling of a low Reynolds number hydraulic jump
JF  - Environmental Modelling & Software
N2  - A comparative performance analysis of the CFD platforms OpenFOAM and FLOW-3D is presented, focusing on a 3D swirling turbulent flow: a steady hydraulic jump at low Reynolds number. Turbulence is treated using RANS approach RNG k-ε. A Volume Of Fluid (VOF) method is used to track the air–water interface, consequently aeration is modeled using an Eulerian–Eulerian approach. Structured meshes of cubic elements are used to discretize the channel geometry. The numerical model accuracy is assessed comparing representative hydraulic jump variables (sequent depth ratio, roller length, mean velocity profiles, velocity decay or free surface profile) to experimental data. The model results are also compared to previous studies to broaden the result validation. Both codes reproduced the phenomenon under study concurring with experimental data, although special care must be taken when swirling flows occur. Both models can be used to reproduce the hydraulic performance of energy dissipation structures at low Reynolds numbers.
Y1  - 2016
SN  - 1364-8152
U6  - http://dx.doi.org/10.1016/j.envsoft.2016.02.018
VL  - 80
SP  - 322
EP  - 335
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel B.
A1  - Crookston, B. M.
A1  - Matos, J.
ED  - Crookston, B.
ED  - Tullis, B.
T1  - Numerical investigation of USBR type III stilling basin performance downstream of smooth and stepped spillways
BT  - Session 1: Hydraulic structures
T2  - Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016
Y1  - 2016
SN  - 978-1-884575-75-4
U6  - http://dx.doi.org/10.15142/T340628160853
SP  - 635
EP  - 646
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
ED  - Crookston, B.
ED  - Tullis, B.
T1  - Application of the optical flow method to velocity determination in hydraulic structure models
BT  - Session 11: Fish passage and shiplocks
T2  - Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016
Y1  - 2016
SN  - 978-1-884575-75-4
U6  - http://dx.doi.org/10.15142/T3150628160853
SP  - 223
EP  - 232
ER  - 
TY  - CHAP
A1  - Oertel, M.
A1  - Bung, Daniel B.
ED  - Crookston, B.
ED  - Tullis, B.
T1  - Scouring processes downstream a crossbar block ramp
BT  - Session 3: Scour, erosion, sedimentation
T2  - Hydraulic Structures and Water System Management. 6th IAHR International Symposium on Hydraulic Structures, Portland, OR, 27-30 June 2016
Y1  - 2016
SN  - 978-1-884575-75-4
U6  - http://dx.doi.org/10.15142/T3340628160853
SP  - 549
EP  - 559
ER  - 
TY  - JOUR
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Sensitivity of turbulent Schmidt number and turbulence model to simulations of jets in crossflow
JF  - Environmental Modelling and Software
N2  - Environmental discharges have been traditionally designed by means of cost-intensive and time-consuming experimental studies. Some extensively validated models based on an integral approach have been often employed for water quality problems, as recommended by USEPA (i.e.: CORMIX). In this study, FLOW-3D is employed for a full 3D RANS modelling of two turbulent jet-to-crossflow cases, including free surface jet impingement. Results are compared to both physical modelling and CORMIX to better assess model performance. Turbulence measurements have been collected for a better understanding of turbulent diffusion's parameter sensitivity. Although both studied models are generally able to reproduce jet trajectory, jet separation downstream of the impingement has been reproduced only by RANS modelling. Additionally, concentrations are better reproduced by FLOW-3D when the proper turbulent Schmidt number is used. This study provides a recommendation on the selection of the turbulence model and the turbulent Schmidt number for future outfall structures design studies.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.envsoft.2016.04.030
SN  - 1364-8152 (electronic)
VL  - 82
SP  - 218
EP  - 228
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Development of the interfacial air layer in the non-aerated region of high-velocity spillway flows: Instabilities growth, entrapped air and influence on the self-aeration onset
JF  - International Journal of Multiphase Flow
N2  - Self-aeration is traditionally explained by the water turbulent boundary layer outer edge intersection with the free surface. This paper presents a discussion on the commonly accepted hypothesis behind the computation of the critical point of self-aeration in spillway flows and a new formulation is proposed based on the existence of a developing air flow over the free surface. Upstream of the inception point of self-aeration, some surface roughening has been often reported in previous studies which consequently implies some entrapped air transport and air–water flows coupling. Such air flow is proven in this study by presenting measured air velocities and computing the air boundary layer thickness for a 1V:2H smooth chute flow. Additionally, the growth rate of free surface waves has been analysed by means of Ultrasonic Sensors measurements, obtaining also the entrapped air concentration. High-speed camera imaging has been used for qualitative study of the flow perturbations.
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.ijmultiphaseflow.2016.04.012
SN  - 0301-9322
VL  - 84
SP  - 66
EP  - 74
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Kerpen, Nils B.
A1  - Bung, Daniel B.
A1  - Valero, Daniel
A1  - Schlurmann, Torsten
T1  - Energy dissipation within the wave run-up at stepped revetments
T2  - 8th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering, Qingdao, China
KW  - energy disspation
KW  - wave run-up
KW  - friction
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
ED  - Dewals, Benjamin
T1  - Image processing techniques for velocity estimation in highly aerated flows: bubble image velocimetry vs. optical flow
T2  - Sustainable Hydraulics in the Era of Global Change : Proceedings of the 4th IAHR Europe Congress (Liege, Belgium, 27-29 July 2016)
Y1  - 2016
SN  - 978-1-138-02977-4
SN  - 978-1-4987-8149-7 (eBook)
U6  - http://dx.doi.org/10.1201/b21902-31
SP  - 151
EP  - 157
PB  - CRC Press
ER  -