TY  - JOUR
A1  - Reisert, Steffen
A1  - Geissler, H.
A1  - Weiler, C.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Multiple sensor-type system for monitoring the microbicidal effectiveness of aseptic sterilisation processes
JF  - Food control
N2  - The present work describes a novel multiple sensor-type system for the real-time analysis of aseptic sterilisation processes employing gaseous hydrogen peroxide (H2O2) as a sterilant. The inactivation kinetics of Bacillus atrophaeus by gaseous H2O2 have been investigated by means of a methodical calibration experiment, taking into account the process variables H2O2 concentration, humidity and gas temperature. It has been found that the microbicidal effectiveness at H2O2 concentrations above 2% v/v is largely determined by the concentration itself, while at lower H2O2 concentrations, the gas temperature and humidity play a leading role. Furthermore, the responses of different types of gas sensors towards the influencing factors of the sterilisation process have been analysed within the same experiment. Based on a correlation established between the inactivation kinetics and the sensor responses, a calorimetric H2O2 sensor and a metal-oxide semiconductor (MOX) sensor have been identified as possible candidates for monitoring the microbicidal effectiveness of aseptic sterilisation processes employing gaseous H2O2. Therefore, two linear models that describe the relationship between sensor response and microbicidal effectiveness have been proposed.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.foodcont.2014.07.063
SN  - 1873-7129 (E-Journal); 0956-7135 (Print)
VL  - 47
SP  - 615
EP  - 622
ER  - 
TY  - JOUR
A1  - Konstantinidis, Konstantinos
A1  - Flores Martinez, Claudio
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
A1  - Dykta, Paul
A1  - Bowitz, Pascal
A1  - Rudolph, Martin
A1  - Digel, Ilya
A1  - Kowalski, Julia
A1  - Voigt, Konstantin
A1  - Förstner, Roger
T1  - A lander mission to probe subglacial water on Saturn's moon enceladus for life
JF  - Acta astronautica
Y1  - 2015
SN  - 1879-2030 (E-Journal); 0094-5765 (Print)
VL  - Vol. 106
SP  - 63
EP  - 89
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Yoshinobu, Tatsuo
A1  - Miyamoto, Ko-ichiro
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Recent developments of chemical imaging sensor systems based on the principle of the light-addressable potentiometric sensor
JF  - Sensors and actuators B: Chemical
N2  - The light-addressable potentiometric sensor (LAPS) is an electrochemical sensor with a field-effect structure to detect the variation of the Nernst potential at its sensor surface, the measured area on which is defined by illumination. Thanks to this light-addressability, the LAPS can be applied to chemical imaging sensor systems, which can visualize the two-dimensional distribution of a particular target ion on the sensor surface. Chemical imaging sensor systems are expected to be useful for analysis of reaction and diffusion in various electrochemical and biological samples. Recent developments of LAPS-based chemical imaging sensor systems, in terms of the spatial resolution, measurement speed, image quality, miniaturization and integration with microfluidic devices, are summarized and discussed.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.snb.2014.09.002
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
VL  - 207, Part B
SP  - 926
EP  - 932
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Goßmann, Matthias
A1  - Raatschen, Hans-Jürgen
A1  - Temiz Artmann, Aysegül
A1  - Staat, Manfred
T1  - Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM
T2  - Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)
N2  - We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.
Y1  - 2015
SN  - 978-3-319-02534-6 ; 978-3-319-02535-3
SP  - 187
EP  - 212
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - BOOK
A1  - Tietze, Jürgen
T1  - Terme, Gleichungen, Ungleichungen : Rechenregeln begründen, Fehlerfallen vermeiden
Y1  - 2015
SN  - 978-3-658-06192-0 ; 978-3-658-06193-7
N1  - 1. Aufl. u.d.T.: Tietze, Jürgen: Vom Richtigen und Falschen in der elementaren Algebra. 2007.
PB  - Springer
CY  - Wiesbaden
ET  - 2., überarb. Aufl.
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Mayer, Dirk
A1  - Schöning, Michael Josef
T1  - Gating capacitive field-effect sensors by the charge of nanoparticle/molecule hybrids
JF  - Nanoscale
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C4NR05987E
SN  - 2040-3372 (E-Journal); 2040-3364 (Print)
SP  - 1023
EP  - 1031
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - BOOK
A1  - Kern, Alexander
A1  - Wettingfeld, Jürgen
T1  - Blitzschutzsysteme 2 : Schutz für besondere bauliche Anlagen ; Schutz für elektrische und elektronische Systeme in baulichen Anlagen ; Erläuterungen zu den Normen DIN EN 62305-3 (VDE 0185-305-3):2011-10, DIN EN 62305-4 (VDE 0185-305-4):2011-10. (VDE-Schriftenreihe Normen verständlich ; 160)
Y1  - 2015
SN  - 978-3-8007-3653-9
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - BOOK
A1  - Tietze, Jürgen
T1  - Einführung in die Finanzmathematik : klassische Verfahren und neuere Entwicklungen ; Effektivzins- und Renditeberechnung, Investitionsrechnung, Derivative Finanzinstrumente. - 12., erw. Aufl.
Y1  - 2015
SN  - 978-3-658-07157-8 ; 978-3-658-07156-1
PB  - Springer
CY  - Wiesbaden
ET  - 12., erw. Aufl.
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Krischer, M.
A1  - Leinhos, Marcel
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - An application of field-effect sensors for in-situ monitoring of degradation of biopolymers
JF  - Sensors and actuators B: Chemical
N2  - The characterization of the degradation kinetics of biodegradable polymers is mandatory with regard to their proper application. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) field-effect sensors have been applied for in-situ monitoring of the pH-dependent degradation kinetics of the commercially available biopolymer poly(d,l-lactic acid) (PDLLA) in buffer solutions from pH 3 to pH 13. PDLLA films of 500 nm thickness were deposited on the surface of an Al–p-Si–SiO2–Ta2O5 structure from a polymer solution by means of spin-coating method. The PMEIS sensor is, in principle, capable to detect any changes in bulk, surface and interface properties of the polymer induced by degradation processes. A faster degradation has been observed for PDLLA films exposed to alkaline solutions (pH 9, pH 11 and pH 13).
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.snb.2014.10.058
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
VL  - 207, Part B
SP  - 954
EP  - 959
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Martens, D.
A1  - Liu, X.
A1  - Bienstman, P.
A1  - Fahlman, M.
A1  - Schöning, Michael Josef
A1  - Michiels, L.
A1  - Haenen, K.
A1  - Serpengüzel, A.
A1  - Wagner, Patrick
T1  - Photonic studies on polymer-coated sapphire-spheres : a model system for biological ligands
JF  - Sensors and actuators A: Physical
N2  - In this study we show an optical biosensor concept, based on elastic light scattering from sapphire microspheres. Transmitted and elastic scattering intensity of the microspheres (radius 500 μm, refractive index 1.77) on an optical fiber half coupler is analyzed at 1510 nm. The 0.43 nm angular mode spacing of the resonances is comparable to the angular mode spacing value estimated using the optical size of the microsphere. The spectral linewidths of the resonances are in the order of 0.01 nm, which corresponds to quality factors of approximately 105. A polydopamine layer is used as a functionalizing agent on sapphire microspherical resonators in view of biosensor implementation. The varying layer thickness on the microsphere is determined as a function of the resonance wavelength shift. It is shown that polymer functionalization has a minor effect on the quality factor. This is a promising step toward the development of an optical biosensor.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.sna.2014.11.024
SN  - 1873-3069 (E-Journal); 0924-4247 (Print)
VL  - 222
SP  - 212
EP  - 219
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Uncertainty multimode failure and shakedown analysis of shells
T2  - Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...
N2  - This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.
KW  - Limit analysis
KW  - Shakedown analysis
KW  - Reliability analysis
KW  - Multimode failure
KW  - Non-linear optimization
Y1  - 2015
SN  - 978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)
U6  - http://dx.doi.org/10.1007/978-3-319-12928-0_14
SP  - 279
EP  - 298
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Feichtinger, Linda M.
A1  - Eilmann, Britta
A1  - Buchmann, Nina
A1  - Rigling, Andreas
T1  - Trait-specific responses of Scots pine to irrigation on a short vs long time scale
JF  - Tree Physiology
Y1  - 2015
U6  - http://dx.doi.org/10.1093/treephys/tpu114
SN  - 1758-4469  (Online)
SN  - 0829-318X (Print)
N1  - Ab 12 Monaten nach Veröffentlichung kostenfrei zugänglich.
VL  - 35
IS  - 00
SP  - 1
EP  - 12
PB  - Heron
CY  - Victoria, BC
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Selective Laser Melting of Soda-Lime Glass Powder
JF  - International Journal of Applied Ceramic Technology
Y1  - 2015
U6  - http://dx.doi.org/10.1111/ijac.12338
SN  - 1744-7402
VL  - 12
IS  - 1
SP  - 53
EP  - 61
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications
JF  - International Journal of Applied Ceramic Technology
Y1  - 2015
SN  - 1744-7402
U6  - http://dx.doi.org/10.1111/ijac.12326
VL  - 12
IS  - 1
SP  - 46
EP  - 52
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - BOOK
A1  - Laack, Walter van
T1  - Unser Schlüssel zur Ewigkeit
Y1  - 2015
SN  - 978-3-936624-16-8
SN  - 978-3-936624-27-4
PB  - van Laack
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Fredebeul-Krein, Markus
T1  - TTIP : warum ein Investitionsschutzabkommen wünschenswert ist
JF  - Ordnungspolitischer Kommentar / Institut für Wirtschaftspolitik an der Universität zu Köln
Y1  - 2015
IS  - 02
SP  - 1
EP  - 2
ER  - 
TY  - JOUR
A1  - Klinge, Uwe
A1  - Otto, Jens
A1  - Mühl, Thomas
T1  - High Structural Stability of Textile Implants Prevents Pore Collapse and Preserves Effective Porosity at Strain
JF  - BioMed Research International
Y1  - 2015
U6  - http://dx.doi.org/10.1155/2015/953209
SN  - 2314-6133 (Print)
SN  - 2314-6141 (Online)
N1  - Article ID: 953209
VL  - 2015
ER  - 
TY  - JOUR
A1  - Wu, Chunsheng
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Werner, Frederik
A1  - Schöning, Michael Josef
T1  - Label-free detection of DNA using light-addressable potentiometric sensor modified with a positively charged polyelectrolyte layer
JF  - Nanoscale
N2  - A multi-spot (16 spots) light-addressable potentiometric sensor (MLAPS) consisting of an Al–p-Si–SiO2 structure modified with a weak polyelectrolyte layer of PAH (poly(allylamine hydrochloride)) was applied for the label-free electrical detection of DNA (deoxyribonucleic acid) immobilization and hybridization by the intrinsic molecular charge for the first time. To achieve a preferentially flat orientation of DNA strands and thus, to reduce the distance between the DNA charge and MLAPS surface, the negatively charged probe single-stranded DNAs (ssDNA) were electrostatically adsorbed onto the positively charged PAH layer using a simple layer-by-layer (LbL) technique. In this way, more DNA charge can be positioned within the Debye length, yielding a higher sensor signal. The surface potential changes in each spot induced due to the surface modification steps (PAH adsorption, probe ssDNA immobilization, hybridization with complementary target DNA (cDNA), non-specific adsorption of mismatched ssDNA) were determined from the shifts of photocurrent–voltage curves along the voltage axis. A high sensor signal of 83 mV was registered after immobilization of probe ssDNA onto the PAH layer. The hybridization signal increases from 5 mV to 32 mV with increasing the concentration of cDNA from 0.1 nM to 5 μM. In contrast, a small signal of 5 mV was recorded in the case of non-specific adsorption of fully mismatched ssDNA (5 μM). The obtained results demonstrate the potential of the MLAPS in combination with the simple and rapid LbL immobilization technique as a promising platform for the future development of multi-spot light-addressable label-free DNA chips with direct electrical readout.
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C4NR07225A
VL  - 14
IS  - 7
SP  - 6143
EP  - 6150
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Beging, Stefan
A1  - Leinhos, Marcel
A1  - Jablonski, Melanie
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Studying the spatially resolved immobilisation of enzymes on a capacitive field-effect structure by means of nano-spotting
JF  - Physica status solidi (a)
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431891
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1353
EP  - 1358
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Seifarth, Volker
A1  - Goßmann, Matthias
A1  - Grosse, J. O.
A1  - Becker, C.
A1  - Heschel, I.
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Development of a Bioreactor to Culture Tissue Engineered Ureters Based on the Application of Tubular OPTIMAIX 3D Scaffolds
JF  - Urologia Internationalis
Y1  - 2015
U6  - http://dx.doi.org/10.1159/000368419
SN  - 0042-1138
VL  - 2015
IS  - 95
SP  - 106
EP  - 113
PB  - Karger
CY  - Basel
ER  - 
TY  - JOUR
A1  - Schreiber, Marc
A1  - Barkschat, Kai
A1  - Kraft, Bodo
A1  - Zündorf, Albert
T1  - Quick Pad Tagger : An Efficient Graphical User Interface for Building Annotated Corpora with Multiple Annotation Layers
JF  - Computer Science & Information Technology (CS & IT)
Y1  - 2015
SN  - 978-1-921987-32-8
U6  - http://dx.doi.org/10.5121/csit.2015.50413
SN  - 2231 - 5403
VL  - 5
IS  - 4
SP  - 131
EP  - 143
PB  - Academy & Industry Research Collaboration Center (AIRCC)
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Katz, Evgeny
A1  - Schöning, Michael Josef
T1  - Enzyme logic AND-Reset and OR-Reset gates based on a field-effect electronic transducer modified with multi-enzyme membrane
JF  - Chemical Communications
N2  - Capacitive field-effect sensors modified with a multi-enzyme membrane have been applied for an electronic transduction of biochemical signals processed by enzyme-based AND-Reset and OR-Reset logic gates. The local pH change at the sensor surface induced by the enzymatic reaction was used for the activation of the Reset function for the first time.
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C5CC01362C
VL  - 51
SP  - 6564
EP  - 6567
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Kusch, Peter
A1  - Rieser, Claudia
A1  - Knupp, Gerd
A1  - Mang, Thomas
T1  - Characterization of copolymers of methacrylic acid with poly(ethylene glycol) methyl ether methacrylate macromonomers by analytical pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS)
JF  - Journal of Analytical and Applied Pyrolysis
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.jaap.2015.03.003
SN  - 0165-2370
VL  - Vol. 113
SP  - 412
EP  - 418
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Alexopoulos, Spiros
T1  - Simulation model for the transient process behaviour of solar aluminium recycling in a rotary kiln
JF  - Applied Thermal Engineering
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.applthermaleng.2015.01.007
SN  - 1359-4311
N1  - Autor im Original: Spiridon O. Alexopoulos
VL  - 78
SP  - 387
EP  - 396
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Bromm, Alexander
A1  - Wendeler, Luisa
A1  - Iken, Heiko
A1  - Palomar Duran, Marlena
A1  - Greeff, Anton
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Towards a biosensor to monitor the sterilisation efficiency of aseptic filling machines
JF  - Physica status solidi (a)
N2  - Sterilisation processes are compulsory in medicine, pharmacy, and food industries to prevent infections of consumers and microbiological contaminations of products. Monitoring the sterilisation by conventional microbiological methods is time- and lab-consuming. To overcome this problem, in this work a novel biosensor has been proposed. The sensor enables a fast method to evaluate sterilisation processes. By means of thin-film technology the sensor's transducer structures in form of IDEs (interdigitated electrodes) have been fabricated on a silicon substrate. Physical characterisation of the developed sensor was done by AFM, SEM, and profilometry. Impedance analyses were conducted for the electrical characterisation. As microbiological layer spores of B. atrophaeus have been immobilised on the sensing structure; spores of this type are a well-known sterilisation test organism. Impedance measurements at a fixed frequency over time were performed to monitor the immobilisation process. A sterilisation process according to aseptic filling machines was applied to demonstrate the sensor functionality. After both, immobilisation and sterilisation, a change in impedance could successfully be detected.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431900
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1299
EP  - 1305
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Reisert, Steffen
A1  - Kramer, Friederike
A1  - Begoyan, Vardges K.
A1  - Buniatyan, Vahe V.
A1  - Schöning, Michael Josef
T1  - Multi-parameter sensing using high-k oxide of barium strontium titanate
JF  - Physica status solidi (a)
N2  - High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors. In this work, a Si-based sensor chip containing Pt interdigitated electrodes covered with a thin BST layer (485 nm) has been developed for multi-parameter chemical sensing. The chip has been applied for the contactless measurement of the electrolyte conductivity, the detection of adsorbed charged macromolecules (positively charged polyelectrolytes of polyethylenimine) and the concentration of hydrogen peroxide (H2O2) vapor. The experimental results of functional testing of individual sensors are presented. The mechanism of the BST sensitivity to charged polyelectrolytes and H2O2 vapor has been proposed and discussed.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431911
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1259
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Jildeh, Zaid B.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Pieper, Martin
T1  - Simulating the electromagnetic‐thermal treatment of thin aluminium layers for adhesion improvement
JF  - Physica status solidi (a)
N2  - A composite layer material used in packaging industry is made from joining layers of different materials using an adhesive. An important processing step in the production of aluminium-containing composites is the surface treatment and consequent coating of adhesive material on the aluminium surface. To increase adhesion strength between aluminium layer and the adhesive material, the foil is heat treated. For efficient heating, induction heating was considered as state-of-the-art treatment process. Due to the complexity of the heating process and the unpredictable nature of the heating source, the control of the process is not yet optimised. In this work, a finite element analysis of the process was established and various process parameters were studied. The process was simplified and modelled in 3D. The numerical model contains an air domain, an aluminium layer and a copper coil fitted with a magnetic field concentrating material. The effect of changing the speed of the aluminium foil (or rolling speed) was studied with the change of the coil current. Statistical analysis was used for generating a general control equation of coil current with changing rolling speed.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431893
SN  - 1862-6319
VL  - Vol. 212
IS  - 6
SP  - 1234
EP  - 1241
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Schneider, Wilhelm
A1  - Schneider, Bettina
A1  - Meinhardt, Kerstin
A1  - Kinder, Stephanie
T1  - Die Fallstudie : Ermittlung des körperschaftssteuerlichen Einkommens und des Gewerbeertrags einer Kapitalgesellschaft
JF  - Das Wirtschaftsstudium : wisu ; Zeitschrift für Ausbildung, Examen, Berufseinstieg und Fortbildung
Y1  - 2015
SN  - 0340-3084
N1  - Printausgabe in der Bibliothek Eupener Str. unter der Signatur 43 Z 568
VL  - 44
IS  - 3
SP  - 295
EP  - 298
PB  - Lange
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
T1  - Generative Fertigungsverfahren in der Produktentwicklung
T2  - Spritzgießen 2015
Y1  - 2015
SN  - 978-3-18-234336-3
SP  - 1
EP  - 19
PB  - VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Pilas, Johanna
A1  - Iken, Heiko
A1  - Selmer, Thorsten
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Development of a multi‐parameter sensor chip for the simultaneous detection of organic compounds in biogas processes
JF  - Physica status solidi (a)
N2  - An enzyme-based multi-parameter biosensor is developed for monitoring the concentration of formate, d-lactate, and l-lactate in biological samples. The sensor is based on the specific dehydrogenation by an oxidized β-nicotinamide adenine dinucleotide (NAD+)-dependent dehydrogenase (formate dehydrogenase, d-lactic dehydrogenase, and l-lactic dehydrogenase, respectively) in combination with a diaphorase from Clostridium kluyveri (EC 1.8.1.4). The enzymes are immobilized on a platinum working electrode by cross-linking with glutaraldehyde (GA). The principle of the determination scheme in case of l-lactate is as follows: l-lactic dehydrogenase (l-LDH) converts l-lactate into pyruvate by reaction with NAD+. In the presence of hexacyanoferrate(III), the resulting reduced β-nicotinamide adenine dinucleotide (NADH) is then regenerated enzymatically by diaphorase. The electrochemical detection is based on the current generated by oxidation of hexacyanoferrate(II) at an applied potential of +0.3 V vs. an Ag/AgCl reference electrode. The biosensor will be electrochemically characterized in terms of linear working range and sensitivity. Additionally, the successful practical application of the sensor is demonstrated in an extract from maize silage.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431894
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1306
EP  - 1312
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Abstracting Away Low-Level Details in Service Robotics with Fuzzy Fluents
JF  - Model-Driven Knowledge Engineering for Improved Software Modularity in Robotics and Automation.
Workshop at European Robotics Forum 2015
Vienna, Austria, March 11-13, 2015.
Y1  - 2015
SP  - 1
EP  - 4
ER  - 
TY  - JOUR
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Kirschbaum, M.
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, R.
A1  - Wagner, Torsten
T1  - Light-controllable polymeric material based on temperature-sensitive hydrogels with incorporated graphene oxide
JF  - Physica status solidi (a)
N2  - Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel films with incorporated graphene oxide (GO) were developed and tested as light-stimulated actuators. GO dispersions were synthesized via Hummers method and characterized toward their optical properties and photothermal energy conversion. The hydrogels were prepared by means of photopolymerization. In addition, the influence of GO within the hydrogel network on the lower critical solution temperature (LCST) was investigated by differential scanning calorimetry (DSC). The optical absorbance and the response to illumination were determined as a function of GO concentration for thin hydrogel films. A proof of principle for the stimulation with light was performed.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431944
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1368
EP  - 1374
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - BOOK
A1  - Tietze, Jürgen
T1  - Übungsbuch zur Finanzmathematik : Aufgaben, Testklausuren und ausführliche Lösungen. - 8., verb. Aufl.
Y1  - 2015
SN  - 978-3-658-09073-9
U6  - http://dx.doi.org/10.1007/978-3-658-09074-6
N1  - campus
PB  - Springer
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Vismann, Ulrich
T1  - Beton
T2  - Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.
Y1  - 2015
SN  - 978-3-658-01689-0 ; 978-3-410-24199-7
U6  - http://dx.doi.org/10.1007/978-3-658-01689-0_11
SP  - 477
EP  - 495
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - BOOK
A1  - Vismann, Ulrich
T1  - Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... - 35. Aufl.
Y1  - 2015
SN  - 978-3-658-01689-0 ; 978-3-410-24199-7
U6  - http://dx.doi.org/10.1007/978-3-658-01689-0
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Vismann, Ulrich
T1  - Stahlbeton und Spannbeton nach Eurocode 2
T2  - Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.
Y1  - 2015
SN  - 978-3-658-01689-0 ; 978-3-410-24199-7
U6  - http://dx.doi.org/10.1007/978-3-658-01689-0_12
SP  - 497
EP  - 655
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Stroetmann, Richard
A1  - Lohse, Wolfram
ED  - Vismann, Ulrich
T1  - Stahlbau
T2  - Wendehorst bautechnische Zahlentafeln / 35. Auflage
N2  - Es ist zwischen Stählen bis S460 und solchen mit höherer Streckgrenze zu unterscheiden. Stähle bis S460 sind auch für die plastische Tragwerksberechnung nach dem Fließgelenkverfahren zugelassen. Bei Stählen oberhalb S460 bis S700 ist neben der elastischen eine nichtlineare plastische Tragwerksberechnung unter Berücksichtigung von Teilplastizierungen von Bauteilen in Fließzonen möglich.
Y1  - 2015
SN  - 978-3-658-01689-0 ; 978-3-410-24199-7
U6  - http://dx.doi.org/10.1007/978-3-658-01689-0_13
SP  - 657
EP  - 859
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Feiser, Johannes
ED  - Vismann, Ulrich
T1  - Geotechnik
T2  - Wendehorst Bautechnische Zahlentafeln / 35. Auflage
N2  - In der nationalen und der europäischen Normung werden die geotechnischen Aufgaben zwecks Mindestanforderungen an Baugrunduntersuchung, rechnerische Nachweise und Überwachung der Ausführung in drei Klassen (Kategorien) eingeteilt. Sie richten sich nach der zu erwartenden Reaktion des Baugrundes, nach dem geotechnischen Schwierigkeitsgrad des Tragwerks und seiner Einflüsse auf die Umgebung.

In DIN 4020 wurde die Einteilung bezüglich Art und Umfang der geotechnischen Untersuchungen bereits verbindlich eingeführt.
Y1  - 2015
SN  - 978-3-658-01688-3 (Print)
SN  - 978-3-658-01689-0 (Online)
U6  - http://dx.doi.org/10.1007/978-3-658-01689-0_17
SP  - 1019
EP  - 1101
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - BOOK
A1  - Vismann, Ulrich
T1  - Wendehorst Beispiele aus der Baupraxis / Ulrich Vismann (Hrsg.). - 5., durchges. und aktualis. Aufl.
Y1  - 2015
SN  - 978-3-658-01680-7 (print)  ; 978-3-658-01681-4 (e-Book)
U6  - http://dx.doi.org/10.1007/978-3-658-01681-4
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Vismann, Ulrich
A1  - Schüller, Michael
T1  - Stahlbetonbau
T2  - Wendehorst Beispiele aus der Baupraxis. / 5. Auflage
N2  - Das Kapitel Stahlbetonbau besteht aus einer Formelsammlung (Teil A) sowie einem Praxisbeispiel (Teil B). In dem Praxisbeispiel werden exemplarisch die erforderlichen Rechenschritte und Nachweise zur Bemessung im GZT und GZG nach Eurocode 2 [1] vorgestellt. Die Hinweise im Text beziehen sich, soweit nicht explizit erwähnt, auf Wendehorst, Bautechnische Zahlentafeln, 35. Auflage, „Stahlbeton- und Spannbetonbau nach Eurocode 2“ [2]. Die zum Praxisbeispiel zugehörigen Konstruktions- und Bewehrungszeichnungen stehen im Onlineportal zu diesem Buch zum kostenlosen Download bereit (siehe unter www.springer.com).
Y1  - 2015
SN  - 978-3-658-01680-7 ; 978-3-658-01681-4
U6  - http://dx.doi.org/10.1007/978-3-658-01681-4_9
SP  - 243
EP  - 322
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Stroetmann, Richard
A1  - Lohse, Wolfram
T1  - Stahlbau
T2  - Wendehorst Beispiele aus der Baupraxis. / 5. Auflage
Y1  - 2015
SN  - 978-3-658-01689-0 ; 978-3-410-24199-7
U6  - http://dx.doi.org/10.1007/978-3-658-01681-4_10
SP  - 323
EP  - 431
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Feiser, Johannes
T1  - Geotechnik
T2  - Wendehorst Beispiele aus der Baupraxis. / 5. Auflage
Y1  - 2015
SN  - 978-3-658-01689-0 ; 978-3-410-24199-7
U6  - http://dx.doi.org/10.1007/978-3-658-01681-4_14
SP  - 547
EP  - 598
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Strohmeier, Andreas
T1  - Siedlungswasserwirtschaft
T2  - Wendehorst Beispiele aus der Baupraxis. / 5. Auflage
N2  - Nachfolgende Ausführungen und Berechnungsbeispiele beziehen sich auf Kapitel 19 Siedlungswasserwirtschaft im „Wendehorst: Bautechnische Zahlentafeln 35. Auflage 2015“ (abgekürzt: BZ). Für den Bau von Anlagen der Siedlungswasserwirtschaft sind ebenso die Grundlagen der Hydraulik zu berücksichtigen. Aus diesem Grunde sind auch die entsprechenden Ausführungen zur Hydraulik zu beachten.
Y1  - 2015
SN  - 978-3-658-01689-0 ; 978-3-410-24199-7
U6  - http://dx.doi.org/10.1007/978-3-658-01681-4_16
SP  - 635
EP  - 678
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Biener, Ernst
T1  - Abfallwirtschaft
T2  - Wendehorst Beispiele aus der Baupraxis. - 5. Aufl.
Y1  - 2015
SN  - 978-3-658-01689-0 ; 978-3-410-24199-7
U6  - http://dx.doi.org/10.1007/978-3-658-01681-4_17
SP  - 680
EP  - 723
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Helmig, Ilka
T1  - A few (hi)stories about french illustration
JF  - Slanted
Y1  - 2015
SN  - 1867-6510
IS  - 25 (Paris)
SP  - 210
EP  - 217
PB  - Slanted Publishers
CY  - Karlsruhe
ER  - 
TY  - JOUR
A1  - Timme, Michael
T1  - Kündigung - Die Vorhersehbarkeit eines zukünftigen Eigenbedarfs für den Vermieter
JF  - Monatsschrift für Deutsches Recht : MDR : Zeitschrift für die Zivilrechts-Praxis
Y1  - 2015
SN  - 0340-1812
VL  - 69
IS  - 9
SP  - 489
EP  - 490
PB  - Verlag Dr. Otto Schmidt
CY  - Köln
ER  - 
TY  - CHAP
A1  - Timme, Michael
T1  - Wettbewerbsregeln (§§ 24-27)
T2  - Münchener Kommentar zum europäischen und deutschen Wettbewerbsrecht (Kartellrecht) : Kartellrecht, Missbrauchs- und Fusionskontrolle / hrsg. von Joachim Bornkamm; Frank Montag; Franz Jürgen Säcker. Bd 2: Gesetz gegen Wettbewerbsbeschränkungen (GWB), §§ 1-96, 130, 131. Bd 2:
Y1  - 2015
SN  - 978-3-406-65462-6
SP  - 267
EP  - 286
PB  - Beck
CY  - München
ER  - 
TY  - JOUR
A1  - Fissabre, Anke
T1  - Konstruktion und Raumform im Kirchenbau der Moderne : Die Längsbinderkirchen von Hans Herkommer
JF  - In situ : Zeitschrift für Architekturgeschichte
Y1  - 2015
SN  - 1866-959X
VL  - 7
IS  - 1
SP  - 117
EP  - 124
PB  - Wernersche Verlagsgesellschaft
CY  - Worms
ER  - 
TY  - JOUR
A1  - Frotscher, Ralf
A1  - Koch, Jan-Peter
A1  - Staat, Manfred
T1  - Computational investigation of drug action on human-induced stem cell derived cardiomyocytes
JF  - Journal of biomechanical engineering
Y1  - 2015
U6  - http://dx.doi.org/10.1115/1.4030173
SN  - 1528-8951 (E-Journal); 0148-0731 (Print)
VL  - Vol. 137
IS  - iss. 7
SP  - 071002-1
EP  - 071002-7
PB  - ASME
CY  - New York
ER  - 
TY  - CHAP
A1  - Strohmeier, Andreas
T1  - Siedlungswasserwirtschaft
T2  - Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.
Y1  - 2015
SN  - 978-3-658-01688-3
SP  - 1157
EP  - 1230
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Biener, Ernst
T1  - Abfallwirtschaft
T2  - Wendehorst bautechnische Zahlentafeln / hrsg. von Ulrich Vismann. Ernst Biener ... 35. Aufl.
Y1  - 2015
SN  - 978-3-658-01688-3
SP  - 1231
EP  - 1260
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Schneider, Wilhelm
A1  - Schneider, Bettina
A1  - Meinhardt, Kerstin
A1  - Kinder, Stephanie
T1  - Die Fallstudie : Aufstellung eines Anlagespiegels
JF  - Das Wirtschaftsstudium : wisu ; Zeitschrift für Ausbildung, Examen, Berufseinstieg und Fortbildung
Y1  - 2015
SN  - 0340-3084
N1  - Printausgabe in der Bibliothek Eupener Str. unter der Signatur 43 Z 568
VL  - 44
IS  - 5
PB  - Lange
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Timme, Michael
T1  - Versagung von Pkh trotz Zulassung der Revi­sion wegen grundsätzlicher Bedeutung
JF  - Neue Juristische Wochenschrift (NJW)
Y1  - 2015
SN  - 0341-1915
IS  - 30
SP  - 2173
EP  - 2175
PB  - Beck
CY  - München
ER  - 
TY  - JOUR
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Tran, Thanh Ngoc
A1  - Tolba, R. H.
A1  - Staat, Manfred
T1  - Influence of refrigerated storage on tensile mechanical properties of porcine liver and spleen
JF  - International biomechanics
Y1  - 2015
U6  - http://dx.doi.org/10.1080/23335432.2015.1049295
SN  - 2333-5432
VL  - Vol. 2
IS  - Iss. 1
SP  - 79
EP  - 88
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Rebel, Sören
A1  - Hüning, Felix
A1  - Scholl, Ingrid
A1  - Ferrein, Alexander
T1  - MQOne: Low-cost design for a rugged-terrain robot platform
T2  - Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)
N2  - Rugged terrain robot designs are important for field robotics missions. A number of commercial platforms are available, however, at an impressive price. In this paper, we describe the hardware and software component of a low-cost wheeled rugged-terrain robot. The robot is based on an electric children quad bike and is modified to be driven by wire. In terms of climbing properties, operation time and payload it can compete with some of the commercially available platforms, but at a far lower price.
Y1  - 2015
SN  - 978-3-319-22875-4 (print) ; 978-3-319-22876-1 (E-Book)
U6  - http://dx.doi.org/10.1007/978-3-319-22876-1_19
SP  - 209
EP  - 221
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - An electromechanical model for cardiac tissue constructs
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - Biomechanical study of the female pelvic floor dysfunction using the finite element method
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, N. H.
A1  - Staat, Manfred
T1  - Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - A simplification for shakedown analysis of hardening structures
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Schneider, Wilhelm
A1  - Schneider, Bettina
A1  - Meinhardt, Kerstin
A1  - Kinder, Stephanie
T1  - Allgemeines Steuerrecht
JF  - Das Wirtschaftsstudium : wisu ; Zeitschrift für Ausbildung, Examen, Berufseinstieg und Fortbildung
Y1  - 2015
SN  - 0340-3084
N1  - Printausgabe in der Bibliothek Eupener Str. unter der Signatur 43 Z 568
VL  - 44
IS  - 8-9
SP  - 903
EP  - 910
PB  - Lange
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Schiffels, Johannes
A1  - Selmer, Thorsten
T1  - A flexible toolbox to study protein-assisted metalloenzyme assembly in vitro
JF  - Biotechnology and Bioengineering
Y1  - 2015
U6  - http://dx.doi.org/10.1002/bit.25658
SN  - 1097-0290
VL  - 112
IS  - 11
SP  - 2360
EP  - 2372
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Voigt, Birgit
A1  - Albrecht, Dirk
A1  - Sievers, Susanne
A1  - Becher, Dörte
A1  - Bongaerts, Johannes
A1  - Evers, Stefan
A1  - Schweder, Thomas
A1  - Maurer, Karl-Heinz
A1  - Hecker, Michael
T1  - High-resolution proteome maps of Bacillus licheniformis cells growing in minimal medium
JF  - Proteomics
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pmic.201400504
SN  - 1615-9861
VL  - 15
IS  - 15
SP  - 2629
EP  - 2633
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Dantism, S.
A1  - Takenaga, S.
A1  - Wagner, P.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Light-addressable Potentiometric Sensor (LAPS) Combined with Multi-chamber Structures to Investigate the Metabolic Activity of Cells
JF  - Procedia Engineering
N2  - LAPS are field-effect-based potentiometric sensors which are able to monitor analyte concentrations in a spatially resolved manner. Hence, a LAPS sensor system is a powerful device to record chemical imaging of the concentration of chemical species in an aqueous solution, chemical reactions, or the growth of cell colonies on the sensor surface, to record chemical images. In this work, multi-chamber 3D-printed structures made out of polymer (PP-ABS) were combined with LAPS chips to analyse differentially and simultaneously the metabolic activity of Escherichia coli K12 and Chinese hamster ovary (CHO) cells, and the responds of those cells to the addition of glucose solution.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.647
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 384
EP  - 387
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Bäcker, Matthias
A1  - Siegert, Petra
A1  - Willenberg, H.
A1  - Poghossian, Arshak
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Detection of Adrenaline Based on Substrate Recycling Amplification
JF  - Procedia Engineering
N2  - An amperometric enzyme biosensor has been applied for the detection of adrenaline. The adrenaline biosensor has been prepared by modification of an oxygen electrode with the enzyme laccase that operates at a broad pH range between pH 3.5 to pH 8. The enzyme molecules were immobilized via cross-linking with glutaraldehyde. The sensitivity of the developed adrenaline biosensor in different pH buffer solutions has been studied.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.708
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 540
EP  - 543
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, M.
A1  - Molin, D. G. M.
A1  - Akker, N. M. S. van den
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Sensor System for in-situ and Real-time Monitoring of Polymer (bio) degradation
JF  - Procedia Engineering
N2  - A sensor system for investigating (bio)degradationprocesses of polymers is presented. The system utilizes semiconductor field-effect sensors and is capable of monitoring the degradation process in-situ and in real-time. The degradation of the polymer poly(d,l-lactic acid) is exemplarily monitored in solutions with different pH value, pH-buffer solution containing the model enzyme lipase from Rhizomucormiehei and cell-culture medium containing supernatants from stimulated and non-stimulated THP-1-derived macrophages mimicking activation of the immune system.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.815
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 948
EP  - 951
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Pilas, Johanna
A1  - Mariano, K.
A1  - Keusgen, M.
A1  - Selmer, Thorsten
A1  - Schöning, Michael Josef
T1  - Optimization of an Enzyme-based Multi-parameter Biosensor for Monitoring Biogas Processes
JF  - Procedia Engineering
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.702
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 532
EP  - 535
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Bing, Yu
A1  - Wagner, Torsten
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - Visualization of Defects on a Cultured Cell Layer by Utilizing Chemical Imaging Sensor
JF  - Procedia Engineering
N2  - The chemical imaging sensor is a field-effect sensor which is able to visualize both the distribution of ions (in LAPS mode) and the distribution of impedance (in SPIM mode) inthe sample. In this study, a novel wound-healing assay is proposed, in which the chemical imaging sensor operated in SPIM mode is applied to monitor the defect of a cell layer brought into proximity of the sensing surface.A reduced impedance inside the defect, which was artificially formed ina cell layer, was successfully visualized in a photocurrent image.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.806
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 936
EP  - 939
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Scheja, S.
A1  - Wu, Chunsheng
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Electrostatic Detection of Unlabelled Single- and Double-stranded DNA Using Capacitive Field-effect Devices Functionalized with a Positively Charged Polyelectrolyte Layer
JF  - Procedia Engineering
N2  - Capacitive field-effect electrolyte-insulator-semiconductor sensors consisting of an Al-p-Si-SiO2 structure have been used for the electrical detection of unlabelled single- and double-stranded DNA (dsDNA) molecules by their intrinsic charge. A simple functionalization protocol based on the layer-by-layer (LbL) technique was used to prepare a weak polyelectrolyte/probe-DNA bilayer, followed by the hybridization with complementary target DNA molecules. Due to the flat orientation of the LbL-adsorbed DNA molecules, a high sensor signal has been achieved. In addition, direct label-free detection of in-solution hybridized dsDNA molecules has been studied.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.710
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 544
EP  - 547
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Wallnöfer, Armin
A1  - Drath, Rainer
A1  - Hüning, Felix
T1  - Was ist Funktionales Engineering? Einordnung, Definition, Randbedingungen
T2  - Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
Y1  - 2015
SN  - 978-3-18-092258-4
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wolf, Martin
A1  - Lenz, Laura L.
T1  - The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)
T2  - IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16
Y1  - 2015
SN  - 978-1-4799-4823-9
U6  - http://dx.doi.org/10.1109/SeGAH.2014.7067089
SP  - 135
EP  - 142
PB  - IEEE [u.a.]
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Rahier, Michael
A1  - Ritz, Thomas
A1  - Wallenborn, Ramona
T1  - Information and communication technology for integrated mobility concepts such as E-carsharing
T2  - E-Mobility in Europe : trends and good practice
N2  - During the past decade attitude towards sharing things has changed extremely. Not just personal data is shared (e.g. in social networks) but also mobility. Together with the increased ecological awareness of the recent years, new mobility concepts have evolved. E-carsharing has become a symbol for these changes of attitude. The management of a shared car fleet, the energy management of electric mobility and the management of various carsharing users with individual likes and dislikes are just some of the major challenges of e-carsharing. Weaving it into integrated mobility concepts, this raises complexity even further. These challenges can only be overcome by an appropriate amount of well-shaped information available at the right place and time. In order to gather, process and share the required information, fleet cars have to be equipped with modern information and communication technology (ICT) and become so-called fully connected cars. Ensuring the usability of these ICT systems is another challenge that is often neglected, even though it is usability that makes carsharing comfortable, attractive and supports users’ new attitudes. By means of an integrated and consistent concept for human-machine interaction (HMI), the usability of such systems can be raised tremendously.
KW  - Information and communication technology
KW  - Fully connected car
KW  - E-carsharing
KW  - Mobility management
KW  - Integrated mobility
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_17
SP  - 311
EP  - 326
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - CHAP
A1  - Busse, Daniel
A1  - Esch, Thomas
A1  - Muntaniol, Roman
T1  - Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments
T2  - E-Mobility in Europe : trends and good practice
N2  - The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.
KW  - Carsharing
KW  - Thermal management
KW  - Thermal comfort
KW  - Electrical vehicle
KW  - Passenger compartment
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_18
SP  - 327
EP  - 343
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - BOOK
A1  - Kurz, Melanie
T1  - Handwerk oder Design : zur Ästhetik des Handgemachten
N2  - Manuelle Herstellung ist sozial fair, ökologisch nachhaltig und schafft qualitätsvolle Erzeugnisse! Vorbote für eine großformatige Rückkehr zum Handwerk und zur eigenhändigen Fertigung ist die Maker-Bewegung! – Solche Thesen begegnen uns gegenwärtig oft. Journalistische Texte, Filmdokumentationen, Werbung oder die Ästhetik von Produkten sind ihre Vehikel. Doch wie ist es um die Wiederbelebung des Handwerks tatsächlich bestellt? Und in welchem Verhältnis steht das Design – ein durch und durch industriebasiertes Berufsfeld – zu vorindustriellen Produktionsweisen? Diesen Fragen geht das vorliegende Buch ebenso auf den Grund wie der seit Beginn der Industrialisierung auftretenden Handwerksromantik. Es untersucht zudem, wie aktuelles Design die Sehnsucht nach dem Ursprünglichen mit formalen Kodes beantwortet und wie die visuellen Erscheinungsformen des Handgemachten ihre Wirkung freisetzen.
Y1  - 2015
SN  - 978-3-7705-5943-5 (Druckausgabe)
SN  - 978-3-8467-5943-1 (E-Book)
U6  - http://dx.doi.org/10.30965/9783846759431
PB  - Fink
CY  - Paderborn
ER  - 
TY  - JOUR
A1  - Takenaga, Shoko
A1  - Schneider, Benno
A1  - Erbay, E.
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
JF  - Physica status solidi (a)
N2  - A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201532053
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1347
EP  - 1352
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Bäcker, Matthias
A1  - Iken, Heiko
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Concept for a biomolecular logic chip with an integrated sensor and actuator function
JF  - Physica status solidi (a)
N2  - A concept for a new generation of an integrated multi-functional biosensor/actuator system is developed, which is based on biomolecular logic principles. Such a system is expected to be able to detect multiple biochemical input signals simultaneously and in real-time and convert them into electrical output signals with logical operations such as OR, AND, etc. The system can be designed as a closed-loop drug release device triggered by an enzyme logic gate, while the release of the drug induced by the actuator at the required dosage and timing will be controlled by an additional drug sensor. Thus, the system could help to make an accurate and specific diagnosis. The presented concept is exemplarily demonstrated by using an enzyme logic gate based on a glucose/glucose oxidase system, a temperature-responsive hydrogel mimicking the actuator function and an insulin (drug) sensor. In this work, the results of functional testing of individual amperometric glucose and insulin sensors as well as an impedimetric sensor for the detection of the hydrogel swelling/shrinking are presented.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431913
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1382
EP  - 1388
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Warmer, Johannes
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
A1  - Kaul, Peter
T1  - Detection of triacetone triperoxide using temperature cycled metal-oxide semiconductor gas sensors
JF  - Physica status solidi (a)
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431882
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1289
EP  - 1298
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Delle, Lotta E.
A1  - Huck, Christina
A1  - Bäcker, Matthias
A1  - Müller, Frank
A1  - Grandthyll, Samuel
A1  - Jacobs, Karin
A1  - Lilischkis, Rainer
A1  - Vu, Xuan T.
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
A1  - Thoelen, Roland
A1  - Weil, Maryam
A1  - Ingebrandt, Sven
T1  - Impedimetric immunosensor for the detection of histamine based on reduced graphene oxide
JF  - Physica status solidi (a)
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431863
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1327
EP  - 1334
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Kümmell, Steffen
A1  - Hillgärtner, Michael
T1  - Inductive charging comfortable and nonvisible charging stations for urbanised areas
T2  - E-Mobility in Europe : trends and good practice
N2  - For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today’s state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles’ needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future’s inductive charging infrastructures, several field tests had been carried out and are planned in near future.
KW  - E-mobility
KW  - Inductive charging
KW  - Charging stations
KW  - Urban areas
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_16
SP  - 297
EP  - 309
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - BOOK
A1  - Timme, Michael
T1  - BGB Crashkurs : der sichere Weg durch die Prüfung ; [Fall für Fall durch das Privatrecht]
Y1  - 2015
SN  - 978-3-406-68018-2
PB  - Beck
CY  - München
ET  - 3. Aufl.
ER  - 
TY  - CHAP
A1  - Vitting, Eva
A1  - Schmitz, Timo
A1  - Lenz, Florian
A1  - Querg, David
ED  - Schuh, Günther
T1  - Gib mir ein Zeichen! Visualisierunskonzepte, die Entscheidungshilfe bieten und versteckte Potentiale aufzeigen
T2  - Ergebnisbericht des BMBF-Verbundprojektes PROSENSE : hochauflösende Produktionssteuerung auf Basis kybernetischer Unterstützungssysteme und intelligenter Sensorik
Y1  - 2015
SN  - 978-3-86359-346-9
N1  - BMBF-Förderkennzeichen 02PJ2490
SP  - 148
EP  - 174
PB  - Apprimus-Verl.
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Chanson, Hubert
A1  - Bung, Daniel B.
A1  - Matos, J.
T1  - Stepped spillways and cascades
T2  - Energy dissipation in hydraulic structures / Hubert Chanson (ed.)
Y1  - 2015
SN  - 978-1-138-02755-8 (print) ; 978-1-315-68029-3 (e-Book)
SP  - 45
EP  - 64
PB  - CRC Press
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
ED  - Rowinski, Pawel
T1  - Laboratory models of free-surface flows
T2  - Rivers - physical, fluvial and environmental processes
N2  - Hydraulic modeling is the classical approach to investigate and describe complex fluid motion. Many empirical formulas in the literature used for the hydraulic design of river training measures and structures have been developed using experimental data from the laboratory. Although computer capacities have increased to a high level which allows to run complex numerical simulations on standard workstation nowadays, non-standard design of structures may still raise the need to perform physical model investigations. These investigations deliver insight into details of flow patterns and the effect of varying boundary conditions. Data from hydraulic model tests may be used for calibration of numerical models as well. As the field of hydraulic modeling is very complex, this chapter intends to give a short overview on capacities and limits of hydraulic modeling in regard to river flows and hydraulic structures only. The reader shall get a first idea of modeling principles and basic considerations. More detailed information can be found in the references.
KW  - Physical modeling
KW  - Similitude
KW  - Open channels
KW  - Hydraulic structures
Y1  - 2015
SN  - 978-3-319-17718-2 ; 978-3-319-17719-9
U6  - http://dx.doi.org/10.1007/978-3-319-17719-9_9
SP  - 213
EP  - 228
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Hybrid investigation of air transport processes in moderately sloped stepped spillway flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Balmes, Jan P.
A1  - Bung, Daniel B.
T1  - Numerical simulation of erosion processes on crossbar block ramps
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
T1  - Image processing for bubble image velocimetry in self-aerated flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Numerische Strömungssimulationen von Fließgewässern : Praxisanwendungen und zukünftige Entwicklungen
JF  - Korrespondenz Wasserwirtschaft : KW
Y1  - 2015
SN  - 1616-430X
VL  - 8
IS  - H. 3
SP  - 177
EP  - 182
PB  - Gesellschaft zur Förderung der Abwassertechnik
CY  - Hennef
ER  - 
TY  - CHAP
A1  - Srivastava, Alok
A1  - Knolle, F.
A1  - Schnug, E.
A1  - Scherer, Ulrich W.
T1  - Study of Trace Elements in Water Bodies of the Harz Mts. Region, Germany using Total Reflection X Ray Fluorescence (TXRF)
T2  - DAE-BRNS 12th National Symposium on Nuclear and Radiochemistry NUCAR 2015, Feb. 9-13, Mumbai, India, Mumbai, India; 02/2015
Y1  - 2015
SP  - 355
EP  - 356
ER  - 
TY  - CHAP
A1  - Srivastava, Alok
A1  - Knolle, Friedhart
A1  - Hoyler, Friedrich
A1  - Scherer, Ulrich W.
A1  - Schnug, Ewald
T1  - Uranium Toxicity in the State of Punjab in North-Western India
T2  - Management of Natural Resources in a Changing Environment
N2  - Lately there has been an increasing concern about uranium toxicity in some districts of Punjab State located in the North Western part of India after the publication of a report (Blaurock-Busch et al. 2010) which showed that the concentration of uranium in hair and urine of children suffering from physical deformities, neurological and mental disorder from Malwa region (Fig. 1) of Punjab State was manifold higher than the reference ranges. A train which connects the affected region with the nearby city of Bikaner which has a Cancer Hospital has been nicknamed as Cancer Express due to the frenzy generated on account of uranium related toxicity.
Y1  - 2015
SN  - 978-3-319-12559-6
U6  - http://dx.doi.org/10.1007/978-3-319-12559-6_21
SP  - 271
EP  - 275
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Fissabre, Anke
A1  - Niethammer, Bernhard
T1  - System mit Hülle - Die innovativen Bauten der Steiff-Spielwarenfabrik in Giengen an der Brenz
JF  - In situ : Zeitschrift für Architekturgeschichte
Y1  - 2015
SN  - 1866-959X
N1  - gedruckt in der Bibliothek Bayernallee unter der Signatur 13 Z 959-2015
VL  - 7
IS  - 2
SP  - 247
EP  - 262
PB  - Wernersche Verlagsgesellschaft
CY  - Worms
ER  - 
TY  - CHAP
A1  - Fissabre, Anke
T1  - Die Augsburger Dachterrassen der Renaissance
T2  - Lutherstadt Wittenberg, Torgau und der Hausbau im 16. Jahrhundert : Bericht über die Tagung des Arbeitskreises für Hausforschung e.V. in der Lutherstadt Wittenberg vom 19.-13. Oktober 2011.
Y1  - 2015
SN  - 978-3-89445-517-0
N1  - Jahrbuch für Hausforschung ; 62
SP  - 571
EP  - 585
PB  - Jonas Verlag für Kunst und Literatur
CY  - Marburg
ER  - 
TY  - CHAP
A1  - Sirazitdinova, Y.
A1  - Dulzon, A.
A1  - Müller, Burghard
T1  - Project management practices in engineering university
T2  - 21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015; National Research Tomsk Polytechnic UniversityTomsk; Russian Federation; 5 October 2015 through 9 October 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1088/1757-899X/93/1/012080
N1  - IOP Conference Series: Materials Science and Engineering
Vol. 93, Issue 1
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Verbrennungsmotoren
Y1  - 2015
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ET  - 11. Aufl., [Umdruck]
ER  - 
TY  - JOUR
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
T1  - Physical response of hyperelastic models for composite materials and soft tissues
JF  - Asia pacific journal on computational engineering
Y1  - 2015
U6  - http://dx.doi.org/10.1186/s40540-015-0015-x
SN  - 2196-1166
VL  - 2
IS  - 3 (December 2015)
SP  - 1
EP  - 18
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. 3. Aufl. Bd. 1
Y1  - 2015
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ET  - 3. Aufl.
ER  - 
TY  - JOUR
A1  - Chen, Tao
A1  - Clauser, Christoph
A1  - Marquart, Gabriele
A1  - Willbrand, Karen
A1  - Mottaghy, Darius
T1  - A new upscaling method for fractured porous media
JF  - Advances in Water Resources
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.advwatres.2015.03.009
SN  - 0309-1708
N1  - Corrigendum 2019:
https://doi.org/10.1016/j.advwatres.2019.01.004
VL  - 80
SP  - 60
EP  - 68
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kürten, Sylvia
A1  - Mottaghy, Darius
A1  - Ziegler, Martin
T1  - A new model for the description of the heat transfer for plane thermo-active geotechnical systems based on thermal resistances
JF  - Acta Geotechnica
Y1  - 2015
U6  - http://dx.doi.org/10.1007/s11440-014-0311-6
SN  - 1861-1133
VL  - 10
IS  - 2
SP  - 219
EP  - 229
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Kürten, Sylvia
A1  - Mottaghy, Darius
A1  - Ziegler, Martin
T1  - Design of plane energy geostructures based on laboratory tests and numerical modelling
JF  - Energy and Buildings
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.enbuild.2015.08.039
SN  - 0378-7788
VL  - 107
SP  - 434
EP  - 444
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kürten, Sylvia
A1  - Mottaghy, Darius
A1  - Ziegler, Martin
T1  - Besonderheiten bei der Planung und Berechnung von oberflächennahen thermo-aktiven Bauteilen
JF  - Geotechnik
Y1  - 2015
U6  - http://dx.doi.org/10.1002/gete.201500002
SN  - 2190-6653
VL  - 38
IS  - 2
SP  - 107
EP  - 119
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications
T2  - ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15–19, 2015
Y1  - 2015
SN  - 978-0-7918-5668-0
U6  - http://dx.doi.org/10.1115/GT2015-42043
SP  - V04AT04A008
ER  - 
TY  - BOOK
A1  - Dobischat, Rolf
A1  - Witt, Gerd
A1  - Eich, Dieter
A1  - Marschall, Herbert
A1  - Thurn, Laura
A1  - Kunkel, Maximilian
A1  - Richter, Alina
A1  - Gebhardt, Andreas
T1  - 3D-Drucken in Deutschland : Entwicklungsstand, Potentiale, Herausforderungen, Auswirkungen und Perspektiven
Y1  - 2015
SN  - 978-3-8440-3479-0
N1  - Andreas Gebhardt: Hrsg.
PB  - Shaker-Verl.
CY  - Aachen
ER  -