TY  - CHAP
A1  - Arndt, Tobias
A1  - Conzen, Max
A1  - Elsen, Ingo
A1  - Ferrein, Alexander
A1  - Galla, Oskar
A1  - Köse, Hakan
A1  - Schiffer, Stefan
A1  - Tschesche, Matteo
T1  - Anomaly detection in the metal-textile industry for the reduction of the cognitive load of quality control workers
T2  - PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments
N2  - This paper presents an approach for reducing the cognitive load for humans working in quality control (QC) for production processes that adhere to the 6σ -methodology. While 100% QC requires every part to be inspected, this task can be reduced when a human-in-the-loop QC process gets supported by an anomaly detection system that only presents those parts for manual inspection that have a significant likelihood of being defective. This approach shows good results when applied to image-based QC for metal textile products.
KW  - Datasets
KW  - Neural networks
KW  - Anomaly detection
KW  - Quality control
KW  - Process optimization
Y1  - 2023
SN  - 9798400700699
U6  - http://dx.doi.org/10.1145/3594806.3596558
N1  - PETRA '23: Proceedings of the 16th International Conference on Pervasive Technologies Related to Assistive Environments, Corfu Greece, July 5 - 7, 2023.
SP  - 535
EP  - 542
PB  - ACM
ER  - 
TY  - CHAP
A1  - Wittig, M.
A1  - Rütters, René
A1  - Bragard, Michael
ED  - Reiff-Stephan, Jörg
ED  - Jäkel, Jens
ED  - Schwarz, André
T1  - Application of RL in control systems using the example of a rotatory inverted pendulum
T2  - Tagungsband AALE 2024 : Fit für die Zukunft: praktische Lösungen für die industrielle Automation
N2  - In this paper, the use of reinforcement learning (RL) in control systems is investigated using a rotatory inverted pendulum as an example. The control behavior of an RL controller is compared to that of traditional LQR and MPC controllers. This is done by evaluating their behavior under optimal conditions, their disturbance behavior, their robustness and their development process. All the investigated controllers are developed using MATLAB and the Simulink simulation environment and later deployed to a real pendulum model powered by a Raspberry Pi. The RL algorithm used is Proximal Policy Optimization (PPO). The LQR controller exhibits an easy development process, an average to good control behavior and average to good robustness. A linear MPC controller could show excellent results under optimal operating conditions. However, when subjected to disturbances or deviations from the equilibrium point, it showed poor performance and sometimes instable behavior. Employing a nonlinear MPC Controller in real time was not possible due to the high computational effort involved. The RL controller exhibits by far the most versatile and robust control behavior. When operated in the simulation environment, it achieved a high control accuracy. When employed in the real system, however, it only shows average accuracy and a significantly greater performance loss compared to the simulation than the traditional controllers. With MATLAB, it is not yet possible to directly post-train the RL controller on the Raspberry Pi, which is an obstacle to the practical application of RL in a prototyping or teaching setting. Nevertheless, RL in general proves to be a flexible and powerful control method, which is well suited for complex or nonlinear systems where traditional controllers struggle.
KW  - Rotatory Inverted Pendulum
KW  - MPC
KW  - LQR
KW  - PPO
KW  - Reinforcement Learning
Y1  - 2024
SN  - 978-3-910103-02-3
U6  - http://dx.doi.org/10.33968/2024.53
N1  - 20. AALE-Konferenz. Bielefeld, 06.03.-08.03.2024.
(Tagungsband unter https://doi.org/10.33968/2024.29)
SP  - 241
EP  - 248
PB  - le-tex publishing services GmbH
CY  - Leipzig
ER  - 
TY  - JOUR
A1  - Faßbender, Heinz
A1  - Bühler, Gerhard
T1  - Applying Ada, Java and CORBA for making a command and control information system platform independent
JF  - Proceedings : (SIGAda '99) ; October 17 - 21, 1999 ; Crowne Plaza, Redondo Beach & Marine Hotel, Redondo Beach, CA, USA / ACM SIGAda Annual International Conference
Y1  - 1999
SN  - 1-58113-127-5
N1  - (Ada letters ; 19,3)
SP  - 83
EP  - 88
PB  - ACM
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
A1  - Zähl, Philipp M.
A1  - Wolf, Martin R.
A1  - Haase, Martin
ED  - Cooper, Kendra M.L.
ED  - Bucchiarone, Antonio
T1  - Applying leaderboards for quality improvement in software development projects
T2  - Software Engineering for Games in Serious Contexts
N2  - Software development projects often fail because of insufficient code quality. It is now well documented that the task of testing software, for example, is perceived as uninteresting and rather boring, leading to poor software quality and major challenges to software development companies. One promising approach to increase the motivation for considering software quality is the use of gamification. Initial research works already investigated the effects of gamification on software developers and come to promising. Nevertheless, a lack of results from field experiments exists, which motivates the chapter at hand. By conducting a gamification experiment with five student software projects and by interviewing the project members, the chapter provides insights into the changing programming behavior of information systems students when confronted with a leaderboard. The results reveal a motivational effect as well as a reduction of code smells.
KW  - Leaderboard
KW  - Gamification
KW  - Software testing
KW  - Software development
Y1  - 2023
SN  - 978-3-031-33337-8 (Print)
SN  - 978-3-031-33338-5 (Online)
U6  - http://dx.doi.org/10.1007/978-3-031-33338-5_11
SP  - 243
EP  - 263
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Dylla, Frank
A1  - Lakemeyer, Gerhard
A1  - Murray, Jan
T1  - Approaching a formal soccer theory from behaviour specifications in robotic soccer / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Murray, Jan ; Obst, Oliver ; Röfer, Thomas ; Schiffer, Stefan ; Stolzenburg, Frieder ; Visser, Ubbo ; Wagner, Tho
JF  - Computers in sport / editors: P Dabnichki
Y1  - 2008
SN  - 978-1-8456-4064-4
SP  - 161
EP  - 185
PB  - WIT Press
CY  - Southampton
ER  - 
TY  - CHAP
A1  - Damm, Sebastian
A1  - Rahier, Michael
A1  - Ritz, Thomas
A1  - Schäfer, Thomas
ED  - Davoli, Renzo
T1  - Architecture for platform- and hardware-independent mesh networks : how to unify the channels
T2  - ICSNC 2013 : The Eighth International Conference on Systems and Networks Communications ; October 27, 2013 to October 31, 2013, Venice Italy
N2  - This paper will prove that mesh networks among different platforms and hardware channels can help to channel valuable information even if public telecommunication infrastructure is not available due to arbitrary reasons. Therefore, results of a simulation for mesh networks on mass events will be provided, followed by the developed architecture and an outlook on future research. The developed architecture is currently being implemented and field tested on mass events.
Y1  - 2013
SN  - 978-1-61208-305-6
N1  - IARIA Conference
SP  - 131
EP  - 134
PB  - Curran Associates
CY  - Red Hook, NY
ER  - 
TY  - BOOK
A1  - Mayer, Claudia
T1  - Art : from prehistoric art to modernism / [Text: Claudia Mayer-Iswandy]
Y1  - 2001
SN  - 3-7701-7048-2
N1  - (Flipguide)
PB  - DuMont
CY  - Köln
ER  - 
TY  - CHAP
A1  - Stöbe, Rolf
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
A1  - Breuer, Michael
T1  - Artificial ageing of mobile devices using a simulated GSM/GPRS network
T2  - Eighth International Conference on Availability, Reliability and Security (ARES) : 2-6 Sept. 2013, Regensburg
Y1  - 2013
SP  - 493
EP  - 497
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Schänzle, Christian
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
T1  - As good as it can be: Ventilation system design by a combined scaling and discrete optimization method
T2  - Proceedings of FAN 2015
N2  - The understanding that optimized components do not automatically lead to energy-efficient systems sets the attention from the single component on the entire technical system. At TU Darmstadt, a new field of research named Technical Operations Research (TOR) has its origin. It combines mathematical and technical know-how for the optimal design of technical systems. We illustrate our optimization approach in a case study for the design of a ventilation system with the ambition to minimize the energy consumption for a temporal distribution of diverse load demands. By combining scaling laws with our optimization methods we find the optimal combination of fans and show the advantage of the use of multiple fans.
Y1  - 2015
N1  - Proceedings of FAN 2015, Lyon (France), 15 – 17 April 2015
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Lakemeyer, Gerhard
A1  - Ferrein, Alexander
T1  - Aspects of integrating diverse software into robotic systems extended abstract
T2  - ICRA 2013 - 8th Workshop on Software Development and Integration in Robotics (SDIR), Karlsruhe, Germany
Y1  - 2013
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Lorenz, Imke-Sophie
A1  - Altherr, Lena
A1  - Pelz, Peter F.
ED  - Neufeld, Janis S.
ED  - Buscher, Udo
ED  - Lasch, Rainer
ED  - Möst, Dominik
ED  - Schönberger, Jörn
T1  - Assessing and Optimizing the Resilience of Water Distribution Systems Using Graph-Theoretical Metrics
T2  - Operations Research Proceedings 2019
N2  - Water distribution systems are an essential supply infrastructure for cities. Given that climatic and demographic influences will pose further challenges for these infrastructures in the future, the resilience of water supply systems, i.e. their ability to withstand and recover from disruptions, has recently become a subject of research. To assess the resilience of a WDS, different graph-theoretical approaches exist. Next to general metrics characterizing the network topology, also hydraulic and technical restrictions have to be taken into account. In this work, the resilience of an exemplary water distribution network of a major German city is assessed, and a Mixed-Integer Program is presented which allows to assess the impact of capacity adaptations on its resilience.
KW  - OR 2019
KW  - business analytics
KW  - decision analytics
KW  - digital economy
KW  - mathematical optimization
Y1  - 2020
SN  - 978-3-030-48439-2
SN  - 978-3-030-48438-5
U6  - http://dx.doi.org/10.1007/978-3-030-48439-2_63
N1  - Annual International Conference of the German Operations Research Society (GOR), Dresden, Germany, September 4-6, 2019
SP  - 521
EP  - 527
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Bitz, Andreas
A1  - Kraff, O.
A1  - Orzada, S.
A1  - Maderwald, S.
A1  - Brote, I.
A1  - Johst, S.
A1  - Ladd, E.
T1  - Assessment of RF Safety of Transmit Coils at 7 Tesla by Experimental and Numerical Procedures (490.)
T2  - 19th annual ISMRM scientific meeting and exhibition 2011 : Montreal, Quebec, Canada, 7 - 13 May 2011
Y1  - 2012
SN  - 978-1-61839-284-8
IS  - Volume 1
SP  - 475
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - JOUR
A1  - Hoffmann, Andreas
A1  - Rohrbach, Felix
A1  - Uhl, Matthias
A1  - Ceblin, Maximilian
A1  - Bauer, Thomas
A1  - Mallah, Marcel
A1  - Jacob, Timo
A1  - Heuermann, Holger
A1  - Kuehne, Alexander J. C.
T1  - Atmospheric pressure plasma-jet treatment of polyacrylonitrile-nonwovens—Stabilization and roll-to-roll processing
JF  - Journal of Applied Polymer Science
N2  - Carbon nanofiber nonwovens represent a powerful class of materials with prospective application in filtration technology or as electrodes with high surface area in batteries, fuel cells, and supercapacitors. While new precursor-to-carbon conversion processes have been explored to overcome productivity restrictions for carbon fiber tows, alternatives for the two-step thermal conversion of polyacrylonitrile precursors into carbon fiber nonwovens are absent. In this work, we develop a continuous roll-to-roll stabilization process using an atmospheric pressure microwave plasma jet. We explore the influence of various plasma-jet parameters on the morphology of the nonwoven and compare the stabilized nonwoven to thermally stabilized samples using scanning electron microscopy, differential scanning calorimetry, and infrared spectroscopy. We show that stabilization with a non-equilibrium plasma-jet can be twice as productive as the conventional thermal stabilization in a convection furnace, while producing electrodes of comparable electrochemical performance.
KW  - batteries and fuel cells
KW  - electrospinning
KW  - fibers
KW  - irradiation
KW  - porous materials
Y1  - 2022
U6  - http://dx.doi.org/10.1002/app.52887
SN  - 0021-8995 (Print)
SN  - 1097-4628 (Online)
N1  - Weitere Informationen: Bundesministerium für Bildung und Forschung, Fördernummer: 13XP5036E. Deutsche Forschungsgemeinschaft, Fördernummern: 390874152, 441209207, 327886311
VL  - 139
IS  - 37
SP  - 1
EP  - 9
PB  - Wiley
ER  - 
TY  - JOUR
A1  - Benkner, Thorsten
T1  - Autonomous Slot Assignment Schemes for PRMA++ Third Generation TDMA Systems
JF  - Proceedings / Organization: IEEE Vehicular Technology/Communications Society; Joint Chapter in the Benelux Section and Telecommunications Division, Eindhoven University of Technology, The Netherlands. Ed.: Peter Smulders
Y1  - 1995
SN  - 9061449928
N1  - Symposium on Communications and Vehicular Technology in the Benelux ; (3, 1995, Eindhoven) ; Vehicular Technology Society ; Communications Society ; Institute of Electrical and Electronics Engineers. ; Benelux ; Technische Universiteit. ; Telecommunicatio
PB  - Techn. Univ. Eindhoven, Telecommunications Div.
CY  - Eindhoven
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC a system for future broadband aeronautical multi-carrier communications in the L-BAND
T2  - IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas
Y1  - 2007
SN  - 978-1-4244-1108-5
SP  - 4D2-1
EP  - 4D2-13
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC – Aeronautical Broadband Communication in the L-Band
T2  - First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2006 ; Bd. 3)
Y1  - 2007
SN  - 0070-4083
SP  - 487
EP  - 496
PB  - Deutschen Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
T1  - B-AMC — broadband aeronautical multi-carrier communications
T2  - Integrated Communications, Navigation and Surveillance Conference : [ICNS 2008] ; Bethesda, Md., 5 - 7 May 2008
Y1  - 2008
SN  - 978-1-4244-2303-3 ; 978-1-4244-2304-0
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Bitz, Andreas
A1  - Alaydrus, M.
A1  - Streckert, J.
A1  - Hansen, V.W.
T1  - Base station antennas embedded in complex environments: rf exposure in controlled areas
T2  - 23rd BEMS Annual Meeting, St. Paul, Minnesota, USA, 49-50, June 2001
Y1  - 2001
SP  - 49
EP  - 50
PB  - Bioelectromagnetics Society
CY  - Frederick, MD
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - Basic geometrical singularities in plane-elasticity and plate-bending problems
JF  - International Journal of Solids and Structures. 21 (1985), H. 10
Y1  - 1985
SN  - 0020-7683
SP  - 1047
EP  - 1067
ER  - 
TY  - JOUR
A1  - Gspandl, Stephan
A1  - Pill, Ingo
A1  - Reip, Michael
A1  - Steinbauer, Gerald
A1  - Ferrein, Alexander
T1  - Belief Management for High-Level Robot Programs
JF  - Proceedings of the Twenty-Second International Joint Conference on Artificial Intelligence [electronic resource] : Barcelona, Catalonia, Spain, 16 - 22 July 2011 / sponsored by International Joint Conferences on Artificial Intelligence (IJCAI) and the Association for the Advancement of Artificial Intelligence (AAAI). Ed. by Toby Walsh
Y1  - 2011
N1  - International Joint Conference on Artificial Intelligence ; (22 : ; 2011.07.16-22 : ; Barcelona, Spain) ; IJCAI ; (22 : ; 2011.07.16-22 : ; Barcelona, Spain)
SP  - 900
EP  - 905
ER  - 
TY  - JOUR
A1  - Rens, Gavin
A1  - Ferrein, Alexander
T1  - Belief-node condensation for online POMDP algorithms
N2  - Slightly extended version of the paper accepted at the Robotics and Artificial Intelligence Workshop, a special track of IEEE AFRICON-2013, held in Mauritius, 9-12 September 2013
Y1  - 2013
SP  - 1
EP  - 7
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Schulte-Tigges, Joschua
A1  - Förster, Marco
A1  - Nikolovski, Gjorgji
A1  - Reke, Michael
A1  - Ferrein, Alexander
A1  - Kaszner, Daniel
A1  - Matheis, Dominik
A1  - Walter, Thomas
T1  - Benchmarking of various LiDAR sensors for use in self-driving vehicles in real-world environments
JF  - Sensors
N2  - Abstract
In this paper, we report on our benchmark results of the LiDAR sensors Livox Horizon, Robosense M1, Blickfeld Cube, Blickfeld Cube Range, Velodyne Velarray H800, and Innoviz Pro. The idea was to test the sensors in different typical scenarios that were defined with real-world use cases in mind, in order to find a sensor that meet the requirements of self-driving vehicles. For this, we defined static and dynamic benchmark scenarios. In the static scenarios, both LiDAR and the detection target do not move during the measurement. In dynamic scenarios, the LiDAR sensor was mounted on the vehicle which was driving toward the detection target. We tested all mentioned LiDAR sensors in both scenarios, show the results regarding the detection accuracy of the targets, and discuss their usefulness for deployment in self-driving cars.
KW  - Lidar
KW  - Benchmark
KW  - Self-driving
Y1  - 2022
U6  - http://dx.doi.org/10.3390/s22197146
SN  - 1424-8220
N1  - This article belongs to the Special Issue "Sensor Fusion for Vehicles Navigation and Robotic Systems"
VL  - 22
IS  - 19
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Mayer, Claudia
T1  - Between Resistance and Affirmation: Christa Wolf and German Unification
JF  - Canadian review of comparative literature : CRCL = Revue canadienne de littérature comparée / Canadian Comparative Literature Association. 22 (1995), H. 3-4
Y1  - 1995
SN  - 0319-051X
SP  - 813
EP  - 835
ER  - 
TY  - JOUR
A1  - Mayer, Claudia
T1  - Between Trans- and Interdisciplinarity. »Germanistik« and the Dialectic of Inclusion and Exclusion of the Other(s)
JF  - Language and literature today : proceedings of the XIXth triennal congress of the International Federation for Modern Languages and Literatures ; Brasília 22 - 30 August 1993. General ed. Neide de Faria.
Y1  - 1993
SN  - 85-230-0405-x
N1  - Band 2
SP  - 958
EP  - 966
PB  - Univ.
CY  - Brasilia
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
A1  - Erkens, Holger
T1  - Blocking structures for mixed-mode systems. / Erkens, Holger ; Heuermann, Holger
JF  - Conference proceedings : Tuesday 12th, Wednesday 13th and Thursday 14th October, [RAI International Exhibition and Congress Centre, Amsterdam ; part of European Microwave Week 2004] / EuMA, European Microwave Association. Vol. 1
Y1  - 2004
SN  - 1-580-53992-0
N1  - European Microwave Conference ; (34, 2004, Amsterdam) ; European Microwave Week ; (7, 2004, Amsterdam)
SP  - 297
EP  - 300
PB  - Horizon House Publ.
CY  - London
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
A1  - Rieder, G.
T1  - Bracketing eigenvalues of an oscillating elastic body by integral equations
JF  - Bracketing of eigenfrequencies of continous structures : Euromech Colloquium, no. 112, Mátrafüred (Hungary), 21 - 23 February, 1979 / ed. by À. Bosznay
Y1  - 1980
SN  - 963-05-2625-5
N1  - Euromech Colloquium <112, 1979, Mátrafüred>
SP  - 421
EP  - 434
PB  - Akad. Kiadó
CY  - Budapest
ER  - 
TY  - CHAP
A1  - Sajatovic, Miodrag
A1  - Rihacek, Christoph
A1  - Haindl, Bernhard
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
T1  - Broadband VHF (B-VHF) project achievements and follow-on activities
T2  - Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007
Y1  - 2007
SN  - 1-4244-1216-1
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Caesar: an intelligent domestic service robot
JF  - Intelligent service robotics
N2  - In this paper we present CAESAR, an intelligent domestic service robot. In domestic settings for service robots complex tasks have to be accomplished. Those tasks benefit from deliberation, from robust action execution and from flexible methods for human–robot interaction that account for qualitative notions used in natural language as well as human fallibility. Our robot CAESAR deploys AI techniques on several levels of its system architecture. On the low-level side, system modules for localization or navigation make, for instance, use of path-planning methods, heuristic search, and Bayesian filters. For face recognition and human–machine interaction, random trees and well-known methods from natural language processing are deployed. For deliberation, we use the robot programming and plan language READYLOG, which was developed for the high-level control of agents and robots; it allows combining programming the behaviour using planning to find a course of action. READYLOG is a variant of the robot programming language Golog. We extended READYLOG to be able to cope with qualitative notions of space frequently used by humans, such as “near” and “far”. This facilitates human–robot interaction by bridging the gap between human natural language and the numerical values needed by the robot. Further, we use READYLOG to increase the flexible interpretation of human commands with decision-theoretic planning. We give an overview of the different methods deployed in CAESAR and show the applicability of a system equipped with these AI techniques in domestic service robotics
Y1  - 2012
U6  - http://dx.doi.org/10.1007/s11370-012-0118-y
SN  - 1861-2776
N1  - Special Issue on Artificial Intelligence Techniques for Robotics: Sensing, Representation and Action, Part I
VL  - 5
IS  - 4
SP  - 259
EP  - 276
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
T1  - Calibration of a Network Analyzer Without a Thru Connection for Nonlinear and Multiport Measurements
JF  - IEEE Transactions on Microwave Theory and Techniques. 56 (2008), H. 11, 1
Y1  - 2008
SN  - 0018-9480
SP  - 2505
EP  - 2510
ER  - 
TY  - JOUR
A1  - Claer, Mario
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - Calibration of a Rotating or Revolving Platform with a LiDAR Sensor
JF  - Applied Sciences
Y1  - 2019
U6  - http://dx.doi.org/10.3390/app9112238
SN  - 2076-3417
VL  - Volume 9
IS  - issue 11, 2238
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
A1  - Schiek, Burkhard
T1  - Calibration of network analyser measurements with leakage errors
JF  - Electronics letters. 30 (1994), H. 1
Y1  - 1994
SN  - 0013-5194
SP  - 52
EP  - 53
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
T1  - Calibration procedures with series impedances and unknown lines simplify on-wafer measurements
JF  - IEEE transactions on microwave theory and techniques : MTT ; a publication of the IEEE Microwave Theory and Techniques Society. 47 (1999), H. 1
Y1  - 1999
SN  - 0018-9480
SP  - 1
EP  - 5
ER  - 
TY  - JOUR
A1  - Schopp, Christoph
A1  - Doll, Timo
A1  - Gräser, Ulrich
A1  - Harzheim, Thomas
A1  - Heuermann, Holger
A1  - Kling, Rainer
A1  - Marso, Michael
T1  - Capacitively Coupled High-Pressure Lamp Using Coaxial Line Networks
JF  - IEEE Transactions on Microwave Theory and Techniques
N2  - This paper describes the development of a capacitively coupled high-pressure lamp with input power between 20 and 43 W at 2.45 GHz, using a coaxial line network. Compared with other electrodeless lamp systems, no cavity has to be used and a reduction in the input power is achieved. Therefore, this lamp is an alternative to the halogen incandescent lamp for domestic lighting. To serve the demands of domestic lighting, the filling of the lamp is optimized over all other resulting requirements, such as high efficacy at low induced powers and fast startups. A workflow to develop RF-driven plasma applications is presented, which makes use of the hot S-parameter technique. Descriptions of the fitting process inside a circuit and FEM simulator are given. Results of the combined ignition and operation network from simulations and measurements are compared. An initial prototype is built and measurements of the lamp's lighting properties are presented along with an investigation of the efficacy optimizations using large signal amplitude modulation. With this lamp, an efficacy of 135 lmW -1 is achieved.
Y1  - 2016
U6  - http://dx.doi.org/10.1109/TMTT.2016.2600326
SN  - 0018-9480
VL  - 64
IS  - 10
SP  - 3363
EP  - 3368
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - PAT
A1  - Nötzold, K.
A1  - Bragard, Michael
A1  - Fink, K.
A1  - Griessel, R.
A1  - Wegener, R.
T1  - Cascaded H-bridge converter with transformer based cell power balancing in each voltage level  : [Patentschrift]
Y1  - 2014
N1  - Titel des US-Patents: Bypassed cascaded cell converter : [patent of invention]. - Außerdem veröffentlicht als CN103997231 (A)
PB  - Europäisches Patentamt / United States Patent and Trademark Office [u.a.]
CY  - Den Haag / Alexandria, VA
ER  - 
TY  - CHAP
A1  - Schiffer, Fabian
A1  - Bragard, Michael
T1  - Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - http://dx.doi.org/10.1109/REM.2019.8744101
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Hagemann, Hans-Jürgen
A1  - Hennings, D.
A1  - Wernicke, R.
T1  - Ceramic multilayer capacitors. Hagemann, H. J.; Hennings, D.; Wernicke, R.
JF  - Philips' technical review / Philips' Gloeilampenfabrieken. Philips' Gloeilampenfabrieken <Eindhoven>. 41 (1984)
Y1  - 1984
SN  - 0031-7926
SP  - 89
EP  - 98
ER  - 
TY  - JOUR
A1  - Haag, S.
A1  - Zontar, D.
A1  - Schleupen, Josef
A1  - Müller, T.
A1  - Brecher, C.
T1  - Chain of refined perception in self-optimizing assembly of micro-optical systems
JF  - Journal of sensors and sensor systems
N2  - Today, the assembly of laser systems requires a large share of manual operations due to its complexity regarding the optimal alignment of optics. Although the feasibility of automated alignment of laser optics has been shown in research labs, the development effort for the automation of assembly does not meet economic requirements – especially for low-volume laser production. This paper presents a model-based and sensor-integrated assembly execution approach for flexible assembly cells consisting of a macro-positioner covering a large workspace and a compact micromanipulator with camera attached to the positioner. In order to make full use of available models from computer-aided design (CAD) and optical simulation, sensor systems at different levels of accuracy are used for matching perceived information with model data. This approach is named "chain of refined perception", and it allows for automated planning of complex assembly tasks along all major phases of assembly such as collision-free path planning, part feeding, and active and passive alignment. The focus of the paper is put on the in-process image-based metrology and information extraction used for identifying and calibrating local coordinate systems as well as the exploitation of that information for a part feeding process for micro-optics. Results will be presented regarding the processes of automated calibration of the robot camera as well as the local coordinate systems of part feeding area and robot base.
Y1  - 2014
U6  - http://dx.doi.org/10.5194/jsss-3-87-2014
SN  - 2194-878X
VL  - 3
IS  - 1
SP  - 87
EP  - 95
PB  - Copernicus Publ.
CY  - Göttingen
ER  - 
TY  - JOUR
A1  - Serror, Martin
A1  - Hack, Sacha
A1  - Henze, Martin
A1  - Schuba, Marko
A1  - Wehrle, Klaus
T1  - Challenges and Opportunities in Securing the Industrial Internet of Things
JF  - IEEE Transactions on Industrial Informatics
Y1  - 2021
U6  - http://dx.doi.org/10.1109/TII.2020.3023507
SN  - 1941-0050
VL  - 17
IS  - 5
SP  - 2985
EP  - 2996
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Scholl, Ingrid
A1  - Aach, Til
A1  - Deserno, Thomas M.
A1  - Kuhlen, Torsten
T1  - Challenges of medical image processing
JF  - Computer Science - Research and Development
Y1  - 2011
SN  - 1865-2042
VL  - 26
IS  - 1-2
SP  - 5
EP  - 13
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Holtrup, S.
A1  - Sadeghfam, Arash
A1  - Heuermann, Holger
A1  - Awakowicz, P.
T1  - Characterization and optimization technique for microwave-driven high-intensity discharge lamps using hot S-parameters
JF  - IEEE transactions on microwave theories and techniques
N2  - High-intensity discharge lamps can be driven by radio-frequency signals in the ISM frequency band at 2.45 GHz, using a matching network to transform the impedance of the plasma to the source impedance. To achieve an optimal operating condition, a good characterization of the lamp in terms of radio frequency equivalent circuits under operating conditions is necessary, enabling the design of an efficient matching network. This paper presents the characterization technique for such lamps and presents the design of the required matching network. For the characterization, a high-intensity discharge lamp was driven by a monofrequent large signal at 2.45 GHz, whereas a frequency sweep over 300 MHz was performed across this signal to measure so-called small-signal hot S-parameters using a vector network analyzer. These parameters are then used as an equivalent load in a circuit simulator to design an appropriate matching network. Using the measured data as a black-box model in the simulation results in a quick and efficient method to simulate and design efficient matching networks in spite of the complex plasma behavior. Furthermore, photometric analysis of high-intensity discharge lamps are carried out, comparing microwave operation to conventional operation.
Y1  - 2014
U6  - http://dx.doi.org/10.1109/TMTT.2014.2342652
SN  - 0018-9480
VL  - 62
IS  - 10
SP  - 2471
EP  - 2480
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Schwarte, Rudolf
A1  - Xu, Zhanping
A1  - Ringbeck, Thorsten
A1  - [u.a.], 
T1  - Charge Transfer Simulation in PMD-Structures
T2  - Sensor 99 : proceedings / 9th Int'l Fair and Conference for Sensors, Transducers & Systems, May 18 - 20, 1999, Exhibition Centre Nürnberg/Germany. - Vol. 2
Y1  - 1999
N1  - International Fair and Conference for Sensors, Transducers and Systems <9, 1999, Nürnberg> ; Internationale Messe mit Kongress für Sensoren, Messaufnehmer und Systeme  <9, 1999, Nürnberg>
SP  - 427
EP  - 432
PB  - AMA Service GmbH
CY  - Wunsdorf
ER  - 
TY  - JOUR
A1  - Prume, Klaus
A1  - Tyholdt, F.
A1  - Calame, F.
A1  - Raeder, H.
T1  - Chemically derived seeding layer for {100}-textured PZT thin films   / Tyholdt, F. ; Calame, F. ; Prume, K. ; Raeder, H. ; Muralt, P.
JF  - Journal of Electroceramics. 19 (2007), H. 4
Y1  - 2007
SN  - 1385-3449
SP  - 311
EP  - 314
ER  - 
TY  - JOUR
A1  - Siepmann, Thomas
A1  - Rupietta, D.
T1  - Closer to the customer with computerized  product support
JF  - Technische Mitteilungen Krupp (1993)
Y1  - 1993
CY  - Essen
ER  - 
TY  - CHAP
A1  - Dey, Thomas
A1  - Elsen, Ingo
A1  - Ferrein, Alexander
A1  - Frauenrath, Tobias
A1  - Reke, Michael
A1  - Schiffer, Stefan
ED  - Makedon, Fillia
T1  - CO2 Meter: a do-it-yourself carbon dioxide measuring device for the classroom
T2  - PETRA 2021: The 14th PErvasive Technologies Related to Assistive Environments Conference
N2  - In this paper we report on CO2 Meter, a do-it-yourself carbon dioxide measuring device for the classroom. Part of the current measures for dealing with the SARS-CoV-2 pandemic is proper ventilation in indoor settings. This is especially important in schools with students coming back to the classroom even with high incidents rates. Static ventilation patterns do not consider the individual situation for a particular class. Influencing factors like the type of activity, the physical structure or the room occupancy are not incorporated. Also, existing devices are rather expensive and often provide only limited information and only locally without any networking. This leaves the potential of analysing the situation across different settings untapped. Carbon dioxide level can be used as an indicator of air quality, in general, and of aerosol load in particular. Since, according to the latest findings, SARS-CoV-2 can be transmitted primarily in the form of aerosols, carbon dioxide may be used as a proxy for the risk of a virus infection. Hence, schools could improve the indoor air quality and potentially reduce the infection risk if they actually had measuring devices available in the classroom. Our device supports schools in ventilation and it allows for collecting data over the Internet to enable a detailed data analysis and model generation. First deployments in schools at different levels were received very positively. A pilot installation with a larger data collection and analysis is underway.
KW  - embedded hardware
KW  - sensor networks
KW  - information systems
KW  - education
KW  - do-it-yourself
Y1  - 2021
SN  - 9781450387927
U6  - http://dx.doi.org/10.1145/3453892.3462697
N1  - PETRA '21: The 14th PErvasive Technologies Related to Assistive Environments Conference Corfu Greece 29 June 2021- 2 July 2021
SP  - 292
EP  - 299
PB  - Association for Computing Machinery
CY  - New York
ER  - 
TY  - CHAP
A1  - Steinbauer, Gerald
A1  - Ferrein, Alexander
T1  - CogRob 2018 : 
Cognitive Robotics Workshop.
Proceedings of the 11th Cognitive Robotics Workshop 2018
co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018).
Tempe, AZ, USA, October 27th, 2018.
T2  - CEUR workshop proceedings
Y1  - 2019
SN  - 1613-0073
N1  - edited by Gerald Steinbauer, Alexander Ferrein
IS  - Vol-2325
ER  - 
TY  - CHAP
A1  - Lindenlauf, Simon
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
T1  - Cold Boot Attacks on DDR2 and DDR3 SDRAM
T2  - 10th International Conference on Availability, Reliability and Security (ARES) 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1109/ARES.2015.28
SP  - 287
EP  - 292
ER  - 
TY  - JOUR
A1  - Hagemann, Hans-Jürgen
A1  - Backhaus, U.
A1  - Goessner, S.
T1  - Collaborative eLearning Concepts for University Level Online Laboratory Courses in Engineering. U. Backhaus, S. Goessner, H. J. Hagemann
JF  - Proceedings Online Educa Berlin: 8th International Conference on Technology Supported Learning & Training. 2002
Y1  - 2002
N1  - Online Educa <2002, Berlin>
SP  - 62
EP  - 66
ER  - 
TY  - CHAP
A1  - Bitz, Andreas
A1  - Alaydrus, M.
A1  - Streckert, J.
A1  - Hansen, V.
T1  - Combination of the hybrid/sup [2]/-method and the FDTD-method for solution of boundary value problems with electrically large and high-resolution bodies
T2  - IEEE Antennas and Propagation Society International Symposium (IEEE Cat. No.02CH37313) 2002 : San Antonio, TX, USA, 16-21 June
Y1  - 2002
SN  - 0-7803-7330-8
U6  - http://dx.doi.org/10.1109/APS.2002.1018209
SP  - 278
EP  - 281
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Schubert, Nicole
A1  - Scholl, Ingrid
T1  - Comparing GPU-based multi-volume ray casting techniques
JF  - Computer Science - Research and Development
Y1  - 2011
SN  - 1865-2042
VL  - 26
IS  - 12
SP  - 39
EP  - 50
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Hermanns, Lutz
A1  - Lakemeyer, Gerhard
T1  - Comparing Sensor Fusion Techniques for Ball Position Estimation / Ferrein, Alexander ; Hermanns, Lutz ; Lakemeyer, Gerhard
JF  - RoboCup 2005: Robot Soccer World Cup IX
Y1  - 2006
SN  - 978-3-540-35437-6
N1  - Lecture Notes in Computer Science ; 4020
SP  - 154
EP  - 165
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Leise, Philipp
A1  - Simon, Nicolai
A1  - Altherr, Lena
T1  - Comparison of Piecewise Linearization Techniques to Model Electric Motor Efficiency Maps: A Computational Study
T2  - Operations Research Proceedings 2019
N2  - To maximize the travel distances of battery electric vehicles such as cars or buses for a given amount of stored energy, their powertrains are optimized energetically. One key part within optimization models for electric powertrains is the efficiency map of the electric motor. The underlying function is usually highly nonlinear and nonconvex and leads to major challenges within a global optimization process. To enable faster solution times, one possibility is the usage of piecewise linearization techniques to approximate the nonlinear efficiency map with linear constraints. Therefore, we evaluate the influence of different piecewise linearization modeling techniques on the overall solution process and compare the solution time and accuracy for methods with and without explicitly used binary variables.
KW  - MINLP
KW  - Powertrain
KW  - Piecewise linearization
KW  - Efficiency optimization
Y1  - 2020
SN  - 978-3-030-48439-2
SN  - 978-3-030-48438-5
U6  - http://dx.doi.org/10.1007/978-3-030-48439-2_55
N1  - Annual International Conference of the German Operations Research Society (GOR), Dresden, Germany, September 4-6, 2019
SP  - 457
EP  - 463
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Prume, Klaus
A1  - Roelofs, Andreas
A1  - Schmitz, Thorsten
A1  - Reichenberg, Bernd
T1  - Compensation of the Parasitic Capacitance of a Scanning Force Microscope Cantilever Used for Measurements on Ferroelectric Capacitors of Submicron Size by Means of Finite Element Simulations / Prume, Klaus ; Roelofs, Andreas ; Schmitz, Thorsten ; Reichenb
JF  - Japanese Journal of Applied Physics. 41 (2002), H. 11B
Y1  - 2002
SN  - 0021-4922
SP  - 7198
EP  - 7201
ER  - 
TY  - BOOK
A1  - Faßbender, Heinz
A1  - Gladtz, Katia
A1  - Vogler, Heiko
T1  - Compiler based implementation of syntax directed functional programming
Y1  - 1991
N1  - (Aachener Informatik-Berichte ; 91,10)
PB  - RWTH, Fachgruppe Informatik
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Meeßen, Marcus
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
ED  - Lepuschitz, Wilfried
T1  - Compiling ROS Schooling Curricula via Contentual Taxonomies
T2  - Robotics in Education
Y1  - 2021
SN  - 978-3-030-67411-3
U6  - http://dx.doi.org/10.1007/978-3-030-67411-3_5
N1  - RiE: International Conference on Robotics in Education (RiE);
Advances in Intelligent Systems and Computing book series (AISC, volume 1316)
SP  - 49
EP  - 60
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Land, Ingmar
A1  - A., Peter
A1  - Gligorevic, Snjezana
T1  - Computation of symbol-wise mutual information in transmission systems with logAPP decoders and application to EXIT charts
T2  - 5th International ITG Conference on Source and Channel Coding (SCC) : January 14 - 16, 2004, Erlangen ; conference record. (ITG-Fachbericht ; 181)
Y1  - 2004
SN  - 3-8007-2802-8
SP  - 195
EP  - 202
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Hüning, Felix
A1  - Eifert, T.
A1  - Handrick, K.
A1  - Neuhausen, U.
T1  - Computational Magnetochemistry: Complementary Quantum Mechanical Tools / Eifert, T. ; Handrick, K. ; Hüning, F. ; Neuhausen, U. ; Schilder, H. ; Lueken, H.
JF  - Zeitschrift für Anorganische und Allgemeine Chemie (ZAAC) - Journal of Inorganic and General Chemistry . 632 (2006), H. 4
Y1  - 2006
SN  - 1521-3749
SP  - 521
EP  - 529
PB  - -
ER  - 
TY  - JOUR
A1  - Hüning, Felix
A1  - Eifert, T.
A1  - Handrick, K.
A1  - Neuhausen, U.
T1  - Computational Magnetochemistry: Complementary Quantum Mechanical Tools / Eifert, T. ; Handrick, K. ; Hüning, F. ; Neuhausen, U. ; Schilder, H. ; Lueken, H.
JF  - 20 Jahre Wilhelm-Klemm-Stiftung / Kuratorium der Wilhelm-Klemm-Stiftung (Hrsg.)
Y1  - 2006
SN  - 978-3-8322-5520-6
SP  - 193ff
PB  - Shaker
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Wolf, Martin
A1  - Luczak, Holger
T1  - Computer Supported Communication and Cooperation – Making Information Aware / Luczak, H. ; Wolf, M.
JF  - Human-computer interaction : proceedings of HCI International '99 (the 8th International Conference on Human-Computer Interaction), Munich, Germany, August 22 - 26, 1999
Y1  - 1999
N1  - HCI - International Conference on Human-Computer Interaction ; 8 (Munich, Germany) : 1999.08.22-26 ; in 2 Bänden
SP  - 298
EP  - 302
PB  - Erlbaum
CY  - Mahwah, NJ
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
A1  - Peters, N.
A1  - Schmitz, T.
A1  - Sadeghfam, Arash
T1  - Concept of Balanced Antennas with Load-Invariant Base Impedance Using a Two Element LC-Coupler. Peters, N., Schmitz, Th., Sadeghfam, A., Heuermann, H.
JF  - Proceedings of the European microwave association : journal of the European microwave association
Y1  - 2005
SP  - 117
EP  - 122
PB  - PLUS
CY  - Pisa
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Izquierdo Tello, César
A1  - Damm, Sebastian
T1  - Connecting a pedelec to the cloud as basis for gamification in multi modal mobility planning
T2  - MobileCloud 2014 : 2nd IEEE International Conference on Mobile Cloud Computing, Services, and Engineering Oxford, United Kingdom 7-10 April 2014
Y1  - 2014
SN  - 978-1-4799-2504-9
U6  - http://dx.doi.org/10.1109/MobileCloud.2014.25
SP  - 101
EP  - 108
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Hofmann, Till
A1  - Mataré, Victor
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Constraint-based online transformation of abstract plans into executable robot actions
T2  - Proceedings of the 2018 AAAI Spring Symposium on Integrating Representation, Reasoning, Learning, and Execution for Goal Directed Autonomy
Y1  - 2018
SP  - 549
EP  - 553
ER  - 
TY  - JOUR
A1  - Umutlu, Lale
A1  - Bitz, Andreas
A1  - Maderwald, Stefan
A1  - Orzada, Stephan
A1  - Kinner, Sonja
A1  - Kraff, Oliver
A1  - Brote, Irina
A1  - Ladd, Susanne C.
A1  - Schroeder, Tobias
A1  - Forsting, Michael
T1  - Contrast-enhanced ultra-high-field liver MRI: a feasibility trial
JF  - European Journal of Radiology
Y1  - 2013
U6  - http://dx.doi.org/10.1016/j.ejrad.2011.07.004
SN  - 0720-048X
VL  - 82
IS  - 5
SP  - 760
EP  - 767
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemueller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling Logistics Robots with the Action-based Language YAGI
T2  - Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemüller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling logistics robots with the action-based language YAGI
T2  - Intelligent Robotics and Applications: 9th International Conference, ICIRA 2016, Tokyo, Japan, August 22-24, 2016, Proceedings, Part I
Y1  - 2016
SN  - 978-3-319-43505-3 (Print)
SN  - 978-3-319-43506-0 (Online)
U6  - http://dx.doi.org/10.1007/978-3-319-43506-0_46
N1  - Series: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
VL  - 9834
SP  - 525
EP  - 537
PB  - Springer
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Jacobs, Stefan
A1  - Lakemeyer, Gerhard
T1  - Controlling Unreal Tournament 2004 Bots with the logic-based action language Golog / Jacobs, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard
JF  - Proceedings of the First AAAI Conference on Artificial Intelligence and Interactive Digital Entertainment (AIIDE).
Y1  - 2005
SP  - 151
EP  - 152
ER  - 
TY  - JOUR
A1  - Hartung, Frank
A1  - Girod, Bernd
T1  - Copyright protection in video delivery networks by watermarking of pre-compressed video / Hartung, Frank ; Girod, Bernd
JF  - Multimedia Applications, Services and Techniques - EMAST ´97 : Second European Conference Milan, Italy, May 21-23, 1997 Proceedings / Fdida, Serge ; Morganti, Michele
Y1  - 1997
N1  - Lecture Notes in Computer Science ; 1242
SP  - 423
EP  - 436
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Chen, Bixia
A1  - Schoemberg, Tobias
A1  - Kraff, Oliver
A1  - Dammann, Philipp
A1  - Bitz, Andreas
A1  - Schlamann, Marc
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
A1  - Sure, Ulrich
A1  - Wrede, Karsten H.
T1  - Cranial fixation plates in cerebral magnetic resonance imaging: a 3 and 7 Tesla in vivo image quality study
JF  - Magnetic Resonance Materials in Physics, Biology and Medicine
N2  - Objective
This study assesses and quantifies impairment of postoperative magnetic resonance imaging (MRI) at 7 Tesla (T) after implantation of titanium cranial fixation plates (CFPs) for neurosurgical bone flap fixation.

Materials and methods
The study group comprised five patients who were intra-individually examined with 3 and 7 T MRI preoperatively and postoperatively (within 72 h/3 months) after implantation of CFPs. Acquired sequences included T₁-weighted magnetization-prepared rapid-acquisition gradient-echo (MPRAGE), T₂-weighted turbo-spin-echo (TSE) imaging, and susceptibility-weighted imaging (SWI). Two experienced neurosurgeons and a neuroradiologist rated image quality and the presence of artifacts in consensus reading.

Results
Minor artifacts occurred around the CFPs in MPRAGE and T2 TSE at both field strengths, with no significant differences between 3 and 7 T. In SWI, artifacts were accentuated in the early postoperative scans at both field strengths due to intracranial air and hemorrhagic remnants. After resorption, the brain tissue directly adjacent to skull bone could still be assessed. Image quality after 3 months was equal to the preoperative examinations at 3 and 7 T.

Conclusion
Image quality after CFP implantation was not significantly impaired in 7 T MRI, and artifacts were comparable to those in 3 T MRI.
Y1  - 2016
U6  - http://dx.doi.org/10.1007/s10334-016-0548-1
SN  - 1352-8661
VL  - 29
IS  - 3
SP  - 389
EP  - 398
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - CRVM: Circular Random Variable-based Matcher - A Novel Hashing Method for Fast NN Search in High-dimensional Spaces
T2  - Proceedings of the 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018
Y1  - 2018
SN  - 978-989-758-276-9
U6  - http://dx.doi.org/10.5220/0006692802140221
SP  - 214
EP  - 221
ER  - 
TY  - JOUR
A1  - Benkner, Thorsten
T1  - CS+: A Novel Self-Adaptive Slot Assignment Scheme for ATDMA
JF  - Mobile technology for the human race / 1996 IEEE 46th Vehicular Technology Conference, Atlanta, Georgia, USA, April 28 - May 1, 1996
Y1  - 1996
SN  - 0-7803-3158-3
N1  - Vehicular Technology Conference <46, 1996, Atlanta, Ga.>
PB  - IEEE Service Center
CY  - Piscataway, NY
ER  - 
TY  - CHAP
A1  - Stephan, Achim
A1  - Heuermann, Holger
A1  - Prantner, Michael
T1  - Cutting human tissue with novel atmospheric-pressure microwave plasma jet
T2  - 46th European Microwave Conference (EuMC)
Y1  - 2016
SN  - 978-2-87487-043-9
U6  - http://dx.doi.org/10.1109/EuMC.2016.7824490
SP  - 902
EP  - 905
PB  - IEEE
ER  - 
TY  - JOUR
A1  - Hagemann, Hans-Jürgen
A1  - Bachmann, P.K.
A1  - Lade, H.
A1  - Leers, D.
T1  - CVD Diamond Growth: Gas Compositions and Film Properties / P.K. Bachmann, H.J. Hagemann, H. Lade, D. Leers, D.U. Wiechert and H. Wilson
JF  - Advanced materials '94 : proceedings of the NIRIM International Symposium on Advanced Materials '94, Tsukuba, Japan, March 13 - 17, 1994 / National Institute for Research in Inorganic Materials. Ed. by M. Kamo ...
Y1  - 1994
N1  - NIRIM International Symposium on Advanced Materials ; 1994 (Tsukuba) : 1994.03.13-17
SP  - 115
EP  - 120
PB  - International Communications Specialists
CY  - Tokyo
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Zwilling, Frederik
A1  - Lakemeyer, Gerhard
A1  - Löbach, Matthias
A1  - Reuter, Sebastian
A1  - Jeschke, Sabina
A1  - Ferrein, Alexander
T1  - Cyber-Physical System Intelligence
T2  - Industrial Internet of Things
N2  - Cyber-physical systems are ever more common in manufacturing industries. Increasing their autonomy has been declared an explicit goal, for example, as part of the Industry 4.0 vision. To achieve this system intelligence, principled and software-driven methods are required to analyze sensing data, make goal-directed decisions, and eventually execute and monitor chosen tasks. In this chapter, we present a number of knowledge-based approaches to these problems and case studies with in-depth evaluation results of several different implementations for groups of autonomous mobile robots performing in-house logistics in a smart factory. We focus on knowledge-based systems because besides providing expressive languages and capable reasoning techniques, they also allow for explaining how a particular sequence of actions came about, for example, in the case of a failure.
KW  - Smart factory
KW  - Industry 4.0
KW  - Multi-robot systems
KW  - Autonomous mobile robots
KW  - RoboCup
Y1  - 2017
SN  - 978-3-319-42559-7
U6  - http://dx.doi.org/10.1007/978-3-319-42559-7_17
N1  - Springer Series in Wireless Technology
SP  - 447
EP  - 472
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - König, Johannes Alexander
A1  - Wolf, Martin
T1  - Cybersecurity awareness training provided by the competence developing game GHOST
T2  - ACHI 2018 : The Eleventh International Conference on Advances in Computer-Human Interactions
N2  - This paper introduces a Competence Developing Game (CDG) for the purpose of a cybersecurity awareness training for businesses. The target audience will be discussed in detail to understand their requirements. It will be explained why and how a mix of business simulation and serious game meets these stakeholder requirements. It will be shown that a tablet and touchscreen based approach is the most suitable solution. In addition, an empirical study will be briefly presented. The study was carried out to examine how an interaction system for a 3D-tablet based CDG has to be designed, to be manageable for non-game experienced employees. Furthermore, it will be explained which serious content is necessary for a Cybersecurity awareness training CDG and how this content is wrapped in the game
KW  - Awareness
KW  - CDG
KW  - Serious Game
KW  - tablet game
KW  - business simulation
Y1  - 2018
SN  - 978-1-61208-616-3
N1  - Proceeding of the Eleventh International Conference on Advances in Computer-Human Interactions (ACHI 2018), Rome, Italy.
SP  - 81
EP  - 87
ER  - 
TY  - JOUR
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Fuzzy Notions in GOLOG
JF  - International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems
N2  - In this paper we present an extension of the action language Golog that allows for using fuzzy notions in non-deterministic argument choices and the reward function in decision-theoretic planning. Often, in decision-theoretic planning, it is cumbersome to specify the set of values to pick from in the non-deterministic-choice-of-argument statement. Also, even for domain experts, it is not always easy to specify a reward function. Instead of providing a finite domain for values in the non-deterministic-choice-of-argument statement in Golog, we now allow for stating the argument domain by simply providing a formula over linguistic terms and fuzzy uents. In Golog’s forward-search DT planning algorithm, these formulas are evaluated in order to find the agent’s optimal policy. We illustrate this in the Diner Domain where the agent needs to calculate the optimal serving order.
Y1  - 2016
U6  - http://dx.doi.org/10.1142/S0218488516400134
SN  - 1793-6411
VL  - 24
IS  - Issue Suppl. 2
SP  - 123
EP  - 143
PB  - World Scientific
CY  - Singapur
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Linguistic Terms in Golog
T2  - FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0074-1424-4
SN  - 1613-0073
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Reuter, Sebastian
A1  - Ewert, Daniel
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - Decisive Factors for the Success of the Carologistics RoboCup Team in the RoboCup Logistics League 2014
T2  - RoboCup 2014: Robot World Cup XVIII
Y1  - 2015
SN  - 978-3-319-18615-3
N1  - Lecture Notes in Computer Science ; 8992
SP  - 155
EP  - 167
PB  - Springer
ER  - 
TY  - JOUR
A1  - Hartung, Frank
A1  - Horn, Uwe
A1  - Huschke, Jörg
A1  - Kampmann, Markus
T1  - Delivery of Broadcast Services in 3G Networks / Hartung, Frank ; Horn, Uwe ; Jörg Huschke ; Kampmann, Markus ; Lohmar, Thorsten ; Lundevall, Magnus
JF  - IEEE Transactions on Broastcasting. 53 (2007), H. 1 Part: 2
Y1  - 2007
SN  - 0018-9316
N1  - campusweit: http://dx.doi.org/10.1109/TBC.2007.891711
SP  - 188
EP  - 199
ER  - 
TY  - JOUR
A1  - Hartung, Frank
A1  - Kampmann, M.
A1  - Horn, U.
A1  - Huschke, J.
T1  - Delivery of Mobile TV services in 3G cellular networks / Kampmann, M. ; Hartung, F.  ; Horn, U. ; Huschke, J. ; Lohmar, T.
JF  - Elektronische Medien : Vorträge des 12. Dortmunder Fernsehseminars vom 20. bis 21. März 2007 in Dortmund / Veranst.: ITG-FKTG-Fachbereich 3 ... Wiss. Tagungsleitung: R. Kays
Y1  - 2007
SN  - 978-3-8007-3019-3
N1  - ITG-Fachbericht ; 199
SP  - 49
EP  - 52
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Schulte-Tigges, Joschua
A1  - Matheis, Dominik
A1  - Reke, Michael
A1  - Walter, Thomas
A1  - Kaszner, Daniel
ED  - Krömker, Heidi
T1  - Demonstrating a V2X enabled system for transition of control and minimum risk manoeuvre when leaving the operational design domain
T2  - HCII 2023: HCI in Mobility, Transport, and Automotive Systems
N2  - Modern implementations of driver assistance systems are evolving from a pure driver assistance to a independently acting automation system. Still these systems are not covering the full vehicle usage range, also called operational design domain, which require the human driver as fall-back mechanism. Transition of control and potential minimum risk manoeuvres are currently research topics and will bridge the gap until full autonomous vehicles are available. The authors showed in a demonstration that the transition of control mechanisms can be further improved by usage of communication technology. Receiving the incident type and position information by usage of standardised vehicle to everything (V2X) messages can improve the driver safety and comfort level. The connected and automated vehicle’s software framework can take this information to plan areas where the driver should take back control by initiating a transition of control which can be followed by a minimum risk manoeuvre in case of an unresponsive driver. This transition of control has been implemented in a test vehicle and was presented to the public during the IEEE IV2022 (IEEE Intelligent Vehicle Symposium) in Aachen, Germany.
KW  - V2X
KW  - Transiton of Control
KW  - Minimum Risk Manoeuvre
KW  - Operational Design Domain
KW  - Connected Automated Vehicle
Y1  - 2023
SN  - 978-3-031-35677-3 (Print)
SN  - 978-3-031-35678-0 (Online)
U6  - http://dx.doi.org/10.1007/978-3-031-35678-0_12
N1  - 5th International Conference, MobiTAS 2023, Held as Part of the 25th HCI International Conference, HCII 2023, Copenhagen, Denmark, July 23–28, 2023.
SP  - 200
EP  - 210
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Hot S-Parameter Measurement System for Plasma and Magnetron Applications
T2  - 2020 German Microwave Conference (GeMiC), Cottbus, Germany, 2020
Y1  - 2020
SN  - 978-3-9820397-1-8
SP  - 124
EP  - 127
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Soltau, N.
A1  - De Doncker, R. W.
A1  - Schmiegel, A.
T1  - Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - http://dx.doi.org/10.1109/ECCE.2010.5618220
SP  - 2944
EP  - 2949
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Gottschlich, J.
A1  - De Doncker, R. W.
T1  - Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure
T2  - 2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE & ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]
Y1  - 2011
SN  - 978-1-61284-958-4 (Print)
SN  - 978-1-61284-956-0 (Online)
U6  - http://dx.doi.org/10.1109/ICPE.2011.5944661
SP  - 1182
EP  - 1189
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Davrajh, Shaniel
A1  - Ferrein, Alexander
T1  - Design considerations of the duo fugam dual rotor UAV
T2  - 2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)
Y1  - 2017
SN  - 978-1-5386-2314-5
U6  - http://dx.doi.org/10.1109/RoboMech.2017.8261115
SP  - 7
EP  - 13
ER  - 
TY  - JOUR
A1  - Hillgärtner, Michael
A1  - Peier, Dirk
T1  - Design of a Measurement Setup for the Impedance of Low-Resistance Plate-Conductors in the RF-Range
JF  - Proceedings of the 10th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM '06, Bra&#351;ov, May 18 - 20, 2006 / ed. by The Transilvania University of Bra&#351;ov, Faculty of Electrical Engineering and Computer Science. [Ed. Mihai Cernat .&#804;] . -  Vol. 1: Keynote addresses, electrotechnics
Y1  - 2006
SN  - 978-973-635703-9
N1  - International Conference on Optimization of Electrical and Electronic Equipment <10, 2006, Bra&#351;ov>; OPTIM <10, 2006, Bra&#351;ov>
SP  - 59
EP  - 64
CY  - Bra&#351;ov
ER  - 
TY  - JOUR
A1  - Hillgärtner, Michael
A1  - Stonies, R.
A1  - Peier, D.
A1  - Voges, E.
T1  - Design of Low Cost Antennas for Reverberation Chambers
JF  - Proceedings of the 16th International Zurich Symposium on Electromagnetic Compatibility : [EMC Week 2005, Zurich, Switzerland, February 13 - 18 ; technical exhibition on EMC and RF/microwave Measurements and Instrumentation (February 15 - 17)] / [Laboratory for Electromagnetic Fields and Microwave Electronics, Swiss Federal Institute of Technology Zurich]
Y1  - 2005
SN  - 3-9521199-9-7
N1  - Nebent.: EMC Zurich 2005 Symposium proceedings. - International Zurich Symposium and Technical Exhibition on Electromagnetic Compatibility <16, 2005, Zürich>  Institut für Feldtheorie und Höchstfrequenztechnik <Zürich>
PB  - ETH-Zentrum-IFH
CY  - Zürich
ER  - 
TY  - JOUR
A1  - Niemüller, Tim
A1  - Ferrein, Alexander
A1  - Beck, Daniel
A1  - Lakemeyer, Gerhard
T1  - Design Principles of the Component-Based Robot Software Framework Fawkes
JF  - Simulation, Modeling, and Programming for Autonomous Robots
Y1  - 2010
N1  - Lecture Notes in Computer Science ; 6472 ; Second International Conference, SIMPAR 2010, Darmstadt, Germany, November 15-18, 2010. Proceedings
SP  - 300
EP  - 311
ER  - 
TY  - CHAP
A1  - Ostkotte, Sebastian
A1  - Peters, Constantin
A1  - Hüning, Felix
A1  - Bragard, Michael
T1  - Design, implementation and verification of an rotational incremental position encoder based on the magnetic Wiegand effect
T2  - 2022 ELEKTRO (ELEKTRO)
N2  - This paper covers the use of the magnetic Wiegand effect to design an innovative incremental encoder. First, a theoretical design is given, followed by an estimation of the achievable accuracy and an optimization in open-loop operation.
Finally, a successful experimental verification is presented. For this purpose, a permanent magnet synchronous machine is controlled in a field-oriented manner, using the angle information of the prototype.
KW  - Position Encoder
KW  - Rotational Encoder
KW  - Wiegand Effect
KW  - Angle Sensor
KW  - Incremental Encoder
Y1  - 2022
SN  - 978-1-6654-6726-1
SN  - 978-1-6654-6727-8
U6  - http://dx.doi.org/10.1109/ELEKTRO53996.2022.9803477
SN  - 2691-0616
N1  - 2022 ELEKTRO (ELEKTRO), 23-26 Mai 2022, Krakow, Poland.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
A1  - Pöttgen, Philipp
ED  - Lübbecke, Marco E.
ED  - Koster, Arie
ED  - Letmathe, Peter
ED  - Madlener, Reihard
ED  - Preis, Britta
ED  - Walther, Grit
T1  - Designing a feedback control system via mixed-integer programming
T2  - Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research
N2  - Pure analytical or experimental methods can only find a control strategy for technical systems with a fixed setup. In former contributions we presented an approach that simultaneously finds the optimal topology and the optimal open-loop control of a system via Mixed Integer Linear Programming (MILP). In order to extend this approach by a closed-loop control we present a Mixed Integer Program for a time discretized tank level control. This model is the basis for an extension by combinatorial decisions and thus for the variation of the network topology. Furthermore, one is able to appraise feasible solutions using the global optimality gap.
KW  - Optimal Topology
KW  - Controller Parameter
KW  - Level Control System
KW  - Technical Operation Research
KW  - Optimal Closed Loop
Y1  - 2016
SN  - 978-3-319-28695-2
U6  - http://dx.doi.org/10.1007/978-3-319-28697-6_18
SP  - 121
EP  - 127
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Bitz, Andreas
A1  - Felder, Jorg
A1  - Wittig, Tilmann
T1  - Designing MRI Coils with Aid of Simulation
JF  - Microwaves & RF
Y1  - 2013
SN  - 0745-2993
VL  - 52
IS  - 7
SP  - 56
PB  - Penton
CY  - Cleveland, Ohio
ER  - 
TY  - JOUR
A1  - Schopp, Christoph
A1  - Rohrbach, Felix
A1  - Langer, Luc
A1  - Heuermann, Holger
T1  - Detection of welding wire length by active S11 measurement
JF  - IEEE Transactions on Plasma Science
N2  - A novel method to determine the extruded length of a metallic wire for a directed energy deposition (DED) process using a microwave (MW) plasma jet with a straight-through wire feed is presented. The method is based on the relative comparison of the measured frequency response obtained by the large-signal scattering parameter (Hot-S) technique. In the practical working range, repeatability of less than 6% for a nonactive plasma and 9% for the active plasma state is found. Measurements are conducted with a focus on a simple solution to decrease the processing time and reduce the integration time of the process into the existing hardware. It is shown that monitoring a single frequency for magnitude and phase changes is sufficient to achieve good accuracy. A combination of different measurement values to determine the length is possible. The applicability to different diameter of the same material is shown as well as a contact detection of the wire and metallic substrate.
KW  - Circuit simulation
KW  - Hot S-parameter
KW  - Modeling
KW  - Plasma
KW  - Plasma diagnostics
Y1  - 2024
U6  - http://dx.doi.org/10.1109/TPS.2024.3356659
SN  - 0093-3813 (Print)
SN  - 1939-9375 (Online)
IS  - Early Access
SP  - 1
EP  - 6
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Tischbein, Franziska
A1  - Kean, Kilian
A1  - Vertgewall, Chris Martin
A1  - Ulbig, Andreas
A1  - Altherr, Lena
T1  - Determination of the topology of low-voltage distribution grids using cluster methods
T2  - 27th International Conference on Electricity Distribution (CIRED 2023)
N2  - Due to the decarbonization of the energy sector, the electric distribution grids are undergoing a major transformation, which is expected to increase the load on the operating resources due to new electrical loads and distributed energy resources. Therefore, grid operators need to gradually move to active grid management in order to ensure safe and reliable grid operation. However, this requires knowledge of key grid variables, such as node voltages, which is why the mass integration of measurement technology (smart meters) is necessary. Another problem is the fact that a large part of the topology of the distribution grids is not sufficiently digitized and models are partly faulty, which means that active grid operation management today has to be carried out largely blindly. It is therefore part of current research to develop methods for determining unknown grid topologies based on measurement data. In this paper, different clustering algorithms are presented and their performance of topology detection of low voltage grids is compared. Furthermore, the influence of measurement uncertainties is investigated in the form of a sensitivity analysis.
Y1  - 2023
SN  - 978-1-83953-855-1
U6  - http://dx.doi.org/10.1049/icp.2023.0478
N1  - 27th International Conference on Electricity Distribution (CIRED 2023), 12-15 June 2023, Rome, Italy.
SP  - 1
EP  - 5
PB  - IEEE
ER  - 
TY  - JOUR
A1  - Rietsch, Stefan H. G.
A1  - Brunheim, Sascha
A1  - Orzada, Stephan
A1  - Voelker, Maximilian N.
A1  - Maderwald, Stefan
A1  - Bitz, Andreas
A1  - Gratz, Marcel
A1  - Ladd, Mark E.
A1  - Quick, Harald H.
T1  - Development and evaluation of a 16-channel receive-only RF coil to improve 7T ultra-high field body MRI with focus on the spine
JF  - Magnetic Resonance in Medicine
Y1  - 2019
U6  - http://dx.doi.org/10.1002/mrm.27731
SN  - 1522-2594
IS  - Early view
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Wolf, Martin
A1  - Foltz, Christian
A1  - Schlick, Christopher
A1  - Luczak, Holger
T1  - Development and evaluation of a groupware system to support chemical design processes / Wolf, Martin ; Foltz, Christian ; Schlick, Christopher ; Luczak, Holger
JF  - International Journal of Human-Computer Interaction . 14 (2002), H. 2
Y1  - 2002
SN  - 1044-7318
SP  - 181
EP  - 198
PB  - -
ER  - 
TY  - CHAP
A1  - Nursinski-Stolberg, André
A1  - Gangatharan, Kiritharan
A1  - Czarnecki, Christian
ED  - Mayr, Heinrich C.
ED  - Pinzger, Martin
T1  - Development of a subject-oriented reference process model for the telecommunications industry
T2  - GI Edition Proceedings Band 259 INFORMATIK 2016
N2  - Generally the usage of reference models can be structured top-down or bottom-up. The practical need of agile change and flexible organizational implementation requires a consistent mapping to an operational level. In this context, well-established reference process models are typically structured top-down. The subject-oriented Business Process Management (sBPM) offers a modeling concept that is structured bottom-up and concentrates on the process actors on an
operational level. This paper applies sBPM to the enhanced Telecom Operations Map (eTOM), a well-accepted reference process model in the telecommunications industry. The resulting design artifact is a concrete example for a combination of a bottom-up and top-down developed reference model. The results are evaluated and confirmed in practical context through the involvement of the industry body TMForum.
KW  - Subject-oriented Business Process Management
KW  - Reference Process Model
KW  - eTOM
KW  - Telecommunications Industry.
Y1  - 2016
SN  - 9783885796534
SN  - 1617-5468
N1  - 26.-30. September 2016, Klagenfurt.
SP  - 699
EP  - 712
PB  - Gesellschaft für Informatik e.V.
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Grund, Raphael M.
A1  - Altherr, Lena
ED  - Reiff-Stephan, Jörg
ED  - Jäkel, Jens
ED  - Schwarz, André
T1  - Development of an open source energy disaggregation tool for the home automation platform Home Assistant
T2  - Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel
N2  - In order to reduce energy consumption of homes, it is important to make transparent which devices consume how much energy. However, power consumption is often only monitored aggregated at the house energy meter. Disaggregating this power consumption into the contributions of individual devices can be achieved using Machine Learning. Our work aims at making state of the art disaggregation algorithms accessibe for users of the open source home automation platform Home Assistant.
KW  - Home Automation Platform
KW  - Home Assistant
KW  - Open Source
KW  - Machine Learning
KW  - Energy Disaggregation
Y1  - 2023
SN  - 978-3-910103-01-6
U6  - http://dx.doi.org/10.33968/2023.02
N1  - 19. AALE-Konferenz. Luxemburg, 08.03.-10.03.2023.
BTS Connected Buildings & Cities Luxemburg
(Tagungsband unter https://doi.org/10.33968/2023.01)
SP  - 11
EP  - 20
PB  - le-tex publishing services GmbH
CY  - Leipzig
ER  - 
TY  - CHAP
A1  - Leise, Philipp
A1  - Breuer, Tim
A1  - Altherr, Lena
A1  - Pelz, Peter F.
T1  - Development, validation and assessment of a resilient pumping system
T2  - Proceedings of the Joint International Resilience Conference, JIRC2020
N2  - The development of resilient technical systems is a challenging task, as the system should adapt automatically to unknown disturbances and component failures. To evaluate different approaches for deriving resilient technical system designs, we developed a modular test rig that is based on a pumping system. On the basis of this example
system, we present metrics to quantify resilience and an algorithmic approach to improve resilience. This approach enables the pumping system to automatically react on unknown disturbances and to reduce the impact of component failures. In this case, the system is able to automatically adapt its topology by activating additional valves. This enables the system to still reach a minimum performance, even in case of failures. Furthermore, timedependent disturbances are evaluated continuously, deviations from the original state are automatically detected and anticipated in the future. This allows to reduce the impact of future disturbances and leads to a more resilient
system behaviour.
KW  - water supply system
KW  - fault detection
KW  - anticipation strategy
Y1  - 2020
SN  - 978-90-365-5095-6
N1  - Proceedings of the Joint International Resilience Conference 2020.
Interconnected: Resilience Innovations for Sustainable Development Goals. 23 - 27 November, 2020
SP  - 97
EP  - 100
ER  - 
TY  - JOUR
A1  - Hagemann, Hans-Jürgen
A1  - Bachmann, P.K.
A1  - Lade, H.
A1  - Leers, D.
T1  - Diamond chemical vapor deposition: gas compositions and film properties / Bachmann, P.K.; Hagemann, H.-J.; Lade, H; Leers, D.; Picht, F.; Wiechert, D.U.; Wilson, H.
JF  - Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. ...
Y1  - 1994
SN  - 1-55899-239-1
N1  - Materials Research Society symposium proceedings ; 339
SP  - 267
EP  - 277
CY  - Pittsburgh, Penn.
ER  - 
TY  - JOUR
A1  - Hagemann, Hans-Jürgen
A1  - Cassidy, Wiliam D.
T1  - Diamond growth rates and quality: dependence on gas phase cpmposition / William D. Cassidy [...], Hans-Jurgen Hagemann
JF  - Diamond, SiC and nitride wide bandgap semiconductors : symposium held April 4 - 8, 1994, San Francisco, California, U.S.A. / ed.: Calvin H. Carter, Jr. ....
Y1  - 1994
SN  - 1-55899-239-1
N1  - Materials Research Society symposium proceedings ; 339
SP  - 285
EP  - 291
CY  - Pittsburgh, Penn. ,
ER  - 
TY  - JOUR
A1  - Krause, Gregor
A1  - Möller, K.
A1  - Meurer, D.
T1  - Dielectric phenomena in semicrystalline polymers
JF  - IEEE Transaction on Electrical Insulation. Vol. 24 (1989), H. No. 2
Y1  - 1989
N1  - Digital Object Identifier 10.1109/14.90276
SP  - 215
EP  - 222
ER  -