TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemueller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling Logistics Robots with the Action-based Language YAGI
T2  - Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Meeßen, Marcus
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
ED  - Lepuschitz, Wilfried
T1  - Compiling ROS schooling curricula via contentual taxonomies
T2  - Robotics in Education
N2  - The Robot Operating System (ROS) is the current de-facto standard in robot middlewares. The steadily increasing size of the user base results in a greater demand for training as well. User groups range from students in academia to industry professionals with a broad spectrum of developers in between. To deliver high quality training and education to any of these audiences, educators need to tailor individual curricula for any such training. In this paper, we present an approach to ease compiling curricula for ROS trainings based on a taxonomy of the teaching contents. The instructor can select a set of dedicated learning units and the system will automatically compile the teaching material based on the dependencies of the units selected and a set of parameters for a particular training. We walk through an example training to illustrate our work.
Y1  - 2021
SN  - 978-3-030-67411-3
U6  - https://doi.org/10.1007/978-3-030-67411-3_5
N1  - RiE: International Conference on Robotics in Education (RiE);
Advances in Intelligent Systems and Computing book series (AISC, volume 1316)
SP  - 49
EP  - 60
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Hofmann, Till
A1  - Mataré, Victor
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Constraint-based online transformation of abstract plans into executable robot actions
T2  - Proceedings of the 2018 AAAI Spring Symposium on Integrating Representation, Reasoning, Learning, and Execution for Goal Directed Autonomy
Y1  - 2018
SP  - 549
EP  - 553
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Davrajh, Shaniel
A1  - Ferrein, Alexander
T1  - Design considerations of the duo fugam dual rotor UAV
T2  - 2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)
Y1  - 2017
SN  - 978-1-5386-2314-5
U6  - https://doi.org/10.1109/RoboMech.2017.8261115
SP  - 7
EP  - 13
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
ED  - Almeida, Luis
T1  - Evaluation of the RoboCup Logistics League and Derived Criteria for Future Competitions
T2  - RoboCup 2015: Robot World Cup XIX
Y1  - 2016
SN  - 978-3-319-29339-4
U6  - https://doi.org/10.1007/978-3-319-29339-4_3
N1  - Lecture Notes in Computer Science ; 9513
SP  - 31
EP  - 43
PB  - Springer International Publishing
CY  - Cham
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Neumann, Tobias
A1  - Henke, Christoph
A1  - Schönitz, Sebastian
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - Improvements for a robust production in the RoboCup logistics league 2016
T2  - RoboCup 2016: Robot World Cup XX. RoboCup 2016.
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - https://doi.org/10.1007/978-3-319-68792-6_49
SP  - 589
EP  - 600
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Hofmann, Till
A1  - Limpert, Nicolas
A1  - Mataré, Victor
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Winning the RoboCup Logistics League with Fast Navigation, Precise Manipulation, and Robust Goal Reasoning
T2  - RoboCup 2019: Robot World Cup XXIII. RoboCup
Y1  - 2019
SN  - 978-3-030-35699-6
U6  - https://doi.org/10.1007/978-3-030-35699-6_41
N1  - Lecture Notes in Computer Science, vol 11531
SP  - 504
EP  - 516
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Khalsa, R.
A1  - Kreyer, Jörg
A1  - Mayntz, Joscha
A1  - Braun, Carsten
A1  - Dahmann, Peter
A1  - Esch, Thomas
A1  - Kemper, Hans
A1  - Schmitz, O.
A1  - Bragard, Michael
T1  - An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt
N2  - In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Fuchs, Britta
ED  - Breitner, Michael
T1  - Kosten-Nutzen-Bewertungen bei mobilen Anwendungen
T2  - Mobile und Ubiquitäre Informationssysteme - Technologien, Prozesse, Marktfahigkeit. Proceedings zur 3. Konferenz Mobile und Ubiquitäre Informationssysteme (MMS 2008) 26. - 28. Februar 2008, München, Germany. - (GI-Edition : Proceedings ; 123) Breitner, Michael H. [Hrsg.]
Y1  - 2008
SN  - 978-3-88579-217-8
SP  - 164
EP  - 177
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Niemüller, Tim
A1  - Schiffer, Stefan
A1  - Lakemeyer, Gerhard
ED  - Boots, Byron
T1  - Lessons learnt from developing the embodied AI platform CAESAR for domestic service robotics
T2  - Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)
Y1  - 2013
SN  - 9781577356011
SP  - 21
EP  - 26
ER  - 
TY  - CHAP
A1  - Leingartner, Max
A1  - Maurer, Johannes
A1  - Steinbauer, Gerald
A1  - Ferrein, Alexander
T1  - Evaluation of sensors and mapping approaches for disasters in tunnels
T2  - IEEE International Symposium on Safety, Security, and Rescue Robotics : SSRR : 21-26 Oct. 2013, Linkoping, Sweden
Y1  - 2013
SN  - 978-1-4799-0879-0
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Ewert, Daniel
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - The Carologistics RoboCup Logistics Team 2013
T2  - RoboCup 2013 : Eindhoven
Y1  - 2013
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
A1  - Schiffer, Stefan
T1  - AllemaniACs@ home 2006 team description
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Sadeghfam, Arash
A1  - Finger, Torsten
T1  - Alternative ignition system based on microwave plasma
T2  - Advanced ignition systems for gasoline engines : [Vorträge der 1st International Conference Advanced Ignition Systems for Gasoline Engines - 1. Internationale Tagung Zündsysteme für Ottomotoren, 12.-13. November 2012, Berlin]
Y1  - 2013
SN  - 9783816931904
SP  - 95
EP  - 103
PB  - Expert-Verl.
CY  - Renningen
ER  - 
TY  - CHAP
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Hot S-Parameter Measurement System for Plasma and Magnetron Applications
T2  - Proceedings of the 2020 German Microwave Conference
N2  - This paper presents the design, development and calibration procedures of a novel hot S-parameter measurement system for plasma and magnetron applications with power level up to 6 kW. Based on a vector network analyzer, a power amplifier and two directional couplers, the input matching hotS 11 and transmission hotS 21 of the device under test are measured at 2.45 GHz center frequency and 300MHz bandwidth, while the device is driven by the magnetron. This measurement system opens a new horizon to develop many new industrial applications such as microwave plasma jets, dryer systems, dryers and so forth. Furthermore, the developing, controlling and monitoring a 2kW 2.45GHz plasma jet and a dryer system using the measurement system are presented and explained.
Y1  - 2020
SN  - 978-3-9820397-1-8
N1  - 13th German Microwave Conference 2020, March 09–11, Cottbus
SP  - 124
EP  - 127
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Weber, Niklas
A1  - Wolf, Martin R.
ED  - Barton, Thomas
T1  - Datenerhebung für die CDG-Forschung
T2  - Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)
Y1  - 2017
SN  - 978-3-944330-56-3
SP  - 218
EP  - 227
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Ögun, Celal Mohan
A1  - Kling, Rainer
A1  - Heuermann, Holger
A1  - Gräser, Ulrich
A1  - Schopp, Christoph
T1  - Elektrodenlose quecksilberfreie Niederdrucklampen betrieben mit Mikrowellen
T2  - Licht 2014 [Elektronische Ressource] : Den Haag, Holland ; 21. Gemeinschaftstagung, 21. bis 24. September 2014 ; Tagungsband
Y1  - 2014
PB  - Nederlandse Stichting voor Verlichtingskunde
CY  - Ede
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
ED  - Zabel, Armin
T1  - Produktion von kundenindividuellen Informationsdienstleistungen
T2  - Workshop Internetbasierte Vertriebsunterstützung in der Praxis : 26. April 2001, Institutszentrum Stuttgart der Fraunhofer-Gesellschaft (IZS) / Fraunhofer Institut Arbeitswirtschaft und Organisation
Y1  - 2001
N1  - Bei dem Beitrag im Tagungsband handelt es sich um einen Ausdruck von  PowerPoint-Folien.
PB  - Fraunhofer IAO
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
A1  - Kallweit, Stephan
T1  - The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe
T2  - ROBOT 2017: Third Iberian Robotics Conference
Y1  - 2018
SN  - 978-3-319-70836-2
U6  - https://doi.org/10.1007/978-3-319-70836-2_31
N1  - Advances in Intelligent Systems and Computing, vol 694;
(AISC, volume 694)
SP  - 370
EP  - 381
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Reke, Michael
A1  - Peter, Daniel
A1  - Schulte-Tigges, Joschua
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Walter, Thomas
A1  - Matheis, Dominik
T1  - A Self-Driving Car Architecture in ROS2
T2  - 2020 International SAUPEC/RobMech/PRASA Conference, Cape Town, South Africa
N2  - In this paper we report on an architecture for a self-driving car that is based on ROS2. Self-driving cars have to take decisions based on their sensory input in real-time, providing high reliability with a strong demand in functional safety. In principle, self-driving cars are robots. However, typical robot software, in general, and the previous version of the Robot Operating System (ROS), in particular, does not always meet these requirements. With the successor ROS2 the situation has changed and it might be considered as a solution for automated and autonomous driving. Existing robotic software based on ROS was not ready for safety critical applications like self-driving cars. We propose an architecture for using ROS2 for a self-driving car that enables safe and reliable real-time behaviour, but keeping the advantages of ROS such as a distributed architecture and standardised message types. First experiments with an automated real passenger car at lower and higher speed-levels show that our approach seems feasible for autonomous driving under the necessary real-time conditions.
Y1  - 2020
SN  - 978-1-7281-4162-6
U6  - https://doi.org/10.1109/SAUPEC/RobMech/PRASA48453.2020.9041020
N1  - 2020 International SAUPEC/RobMech/PRASA Conference, 29-31 Jan. 2020, Cape Town, South Africa
SP  - 1
EP  - 6
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Conzen, Max
A1  - Elsen, Ingo
A1  - Frauenrath, Tobias
A1  - Lyrmann, Andreas
ED  - Reiff-Stephan, Jörg
ED  - Jäkel, Jens
ED  - Schwarz, André
T1  - Sensor retrofitting of existing buildings in an interdisciplinary teaching project at university level
T2  - Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel
N2  - Existing residential buildings have an average lifetime of 100 years. Many of these buildings will exist for at least another 50 years. To increase the efficiency of these buildings while keeping costs at reasonable rates, they can be retrofitted with sensors that deliver information to central control units for heating, ventilation and electricity. This retrofitting process should happen with minimal intervention into existing infrastructure and requires new approaches for sensor design and data transmission. At FH Aachen University of Applied Sciences, students of different disciplines work together to learn how to design, build, deploy and operate such sensors. The presented teaching project already created a low power design for a combined CO2, temperature and humidity measurement device that can be easily integrated into most home automation systems
KW  - Building Automation
KW  - Smart Building
KW  - CO2
KW  - Carbon Dioxide
KW  - Education
Y1  - 2023
SN  - 978-3-910103-01-6
U6  - https://doi.org/10.33968/2023.04
N1  - 19. AALE-Konferenz. Luxemburg, 08.03.-10.03.2023.
BTS Connected Buildings & Cities Luxemburg
(Tagungsband unter https://doi.org/10.33968/2023.01)
SP  - 31
EP  - 40
PB  - le-tex publishing services GmbH
CY  - Leipzig
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Neumann, Tobias
A1  - Henke, Christoph
A1  - Schönitz, Sebastian
A1  - Reuter, Sebastian
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - International Harting Open Source Award 2016: Fawkes for the RoboCup Logistics League
T2  - RoboCup 2016: RoboCup 2016: Robot World Cup XX. RoboCup 2016
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - https://doi.org/10.1007/978-3-319-68792-6_53
N1  - Lecture Notes in Computer Science, LNCS, Vol 9776
SP  - 634
EP  - 642
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
A1  - Marso, Michel
T1  - Multiphysical Study of an Atmospheric Microwave Argon Plasma Jet
T2  - IEEE Transactions on Plasma Science
Y1  - 2017
U6  - https://doi.org/10.1109/TPS.2017.2692735
SN  - 1939-9375
VL  - 45
IS  - 6
SP  - 932
EP  - 937
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Krückel, Kai
A1  - Nolden, Florian
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - Intuitive visual teleoperation for UGVs using free-look augmented reality displays
T2  - 2015 IEEE International Conference on Robotics and Automation (ICRA), Seattle, WA
Y1  - 2015
U6  - https://doi.org/10.1109/ICRA.2015.7139809
SP  - 4412
EP  - 4417
ER  - 
TY  - CHAP
A1  - Neumann, Tobias
A1  - Dülberg, Enno
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A rotating platform for swift acquisition of dense 3D point clouds
T2  - Intelligent Robotics and Applications: 9th International Conference, ICIRA 2016, Tokyo, Japan, August 22-24, 2016, Proceedings, Part I
Y1  - 2016
SN  - 978-3-319-43505-3 (Print)
SN  - 978-3-319-43506-0 (Online)
U6  - https://doi.org/10.1007/978-3-319-43506-0_22
N1  - Series: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
VL  - 9834
SP  - 257
EP  - 268
PB  - Springer
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Finger, Torsten
T1  - 2.45 GHz Plasma Powered Spark Plug by Thermal and EM-Optimization
Y1  - 2014
N1  - Ansys High Frequency Simulation Conference - AHFSC 2014, Munich; 02/2014
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
A1  - Holtrup, S.
T1  - Investigation on efficacy optimization of RF-driven automotive D-lamps
T2  - 44th European Microwave Conference (EuMC),2014, Rome
Y1  - 2014
U6  - https://doi.org/10.1109/EuMC.2014.6986645
SP  - 1154
EP  - 1157
ER  - 
TY  - CHAP
A1  - Neumann, Tobias
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
T1  - Towards a mobile mapping robot for underground mines
T2  - 7th Conference of Robotics and Mechatronics : RobMech 2014 : 27th and 28th Nov. 2014, Cape Town
Y1  - 2014
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Neth, Jannik
A1  - Schuba, Marko
A1  - Brodkorb, Karsten
A1  - Neugebauer, Georg
A1  - Höner, Tim
A1  - Hack, Sacha
T1  - Digital forensics triage app for android
T2  - ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security
N2  - Digital forensics of smartphones is of utmost importance in many criminal cases. As modern smartphones store chats, photos, videos etc. that can be relevant for investigations and as they can have storage capacities of hundreds of gigabytes, they are a primary target for forensic investigators. However, it is exactly this large amount of data that is causing problems: extracting and examining the data from multiple phones seized in the context of a case is taking more and more time. This bears the risk of wasting a lot of time with irrelevant phones while there is not enough time left to analyze a phone which is worth examination. Forensic triage can help in this case: Such a triage is a preselection step based on a subset of data and is performed before fully extracting all the data from the smartphone. Triage can accelerate subsequent investigations and is especially useful in cases where time is essential. The aim of this paper is to determine which and how much data from an Android smartphone can be made directly accessible to the forensic investigator – without tedious investigations. For this purpose, an app has been developed that can be used with extremely limited storage of data in the handset and which outputs the extracted data immediately to the forensic workstation in a human- and machine-readable format.
KW  - Android
KW  - Digital triage
KW  - Triage-app
Y1  - 2023
SN  - 9798400707728
U6  - https://doi.org/10.1145/3600160.3605017
N1  - ARES 2023: The 18th International Conference on Availability, Reliability and Security. August 29 - September 1, 2023. Benevento, Italy.
PB  - ACM
ER  - 
TY  - CHAP
A1  - Neugebauer, Georg
A1  - Brutschy, Lucas
A1  - Meyer, Ulrike
A1  - Wetzel, Susanne
ED  - Garcia-Alfaro, Joaquin
ED  - Lioudakis, Georgios
ED  - Cuppens-Boulahia, Nora
ED  - Foley, Simon
ED  - Fitzgerald, William M.
T1  - Privacy-preserving multi-party reconciliation secure in the malicious model
T2  - DPM 2013, SETOP 2013: Data Privacy Management and Autonomous Spontaneous Security
N2  - The problem of fair and privacy-preserving ordered set reconciliation arises in a variety of applications like auctions, e-voting, and appointment reconciliation. While several multi-party protocols have been proposed that solve this problem in the semi-honest model, there are no multi-party protocols that are secure in the malicious model so far. In this paper, we close this gap. Our newly proposed protocols are shown to be secure in the malicious model based on a variety of novel non-interactive zero-knowledge-proofs. We describe the implementation of our protocols and evaluate their performance in comparison to protocols solving the problem in the semi-honest case.
KW  - Privacy-enhancing technologies
KW  - Secure multi-party computation
KW  - Cryptographic protocols
KW  - Zero-knowledge proofs
KW  - Malicious model
Y1  - 2014
SN  - 978-3-642-54567-2 (Print)
SN  - 978-3-642-54568-9 (Online)
U6  - https://doi.org/10.1007/978-3-642-54568-9_12
N1  - 8th International Workshop, DPM 2013, and 6th International Workshop, SETOP 2013, Egham, UK, September 12-13, 2013.

Part of the Lecture Notes in Computer Science book series (LNSC,volume 8247)
SP  - 178
EP  - 193
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Chircu, Alina
A1  - Czarnecki, Christian
A1  - Friedmann, Daniel
A1  - Pomaskow, Johanna
A1  - Sultanow, Eldar
T1  - Towards a Digital Twin of Society
T2  - Proceedings of the 56th Hawaii International Conference on System Sciences 2023
N2  - This paper describes the potential for developing a digital twin of society- a dynamic model that can be used to observe, analyze, and predict the evolution of various societal aspects. Such a digital twin can help governmental agencies and policy makers in interpreting trends, understanding challenges, and making decisions regarding investments or policies necessary to support societal development and ensure future prosperity. The paper reviews related work regarding the digital twin paradigm and its applications. The paper presents a motivating case study- an analysis of opportunities and challenges faced by the German federal employment agency, Bundesagentur f¨ur Arbeit (BA), proposes solutions using digital twins, and describes initial proofs of concept for such solutions.
KW  - Digital twin
KW  - Digital transformation
KW  - Prototype
KW  - Society
KW  - Stress testing
Y1  - 2023
SN  - 978-0-9981331-6-4
N1  - 56th Hawaii International Conference on System Sciences, HICSS 2023, Maui, Hawaii, USA, January 3-6, 2023
SP  - 6748
EP  - 6757
PB  - University of Hawai'i
CY  - Honolulu
ER  - 
TY  - CHAP
A1  - Stender, Michael
A1  - Ritz, Thomas
T1  - Modeling of business-to-business mobile commerce processes
T2  - Electronic proceedings / ICPR 17, 17th International Conference on Production Research [Blacksburg, Virginia, USA, August 3 - 7, 2003]
Y1  - 2003
SN  - 0-9721257-3-6
CY  - Blacksburg, Va.
ET  - CD-ROM-Ausg.
ER  - 
TY  - CHAP
A1  - Stender, Michael
A1  - Ritz, Thomas
ED  - Uhr, Wolfgang
T1  - Überbetriebliche Ad-hoc-Anwendungsintegration im Mobile Business
T2  - Wirtschaftsinformatik 2003 : Medien, Märkte, Mobilität: - Bd. 1
Y1  - 2003
SN  - 3-7908-0111-9
SP  - 103
EP  - 118
PB  - Physica-Verl.
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Terhaar, Kristin
A1  - Wallenborn, Ramona
ED  - Reiterer, Harald
T1  - HMI für eCarSharing : ein Baustein für nachhaltige Mobilität
T2  - Mensch & Computer 2012 - Workshopband : 12. Fachübergreifende Konferenz für interaktive und kooperative Medien ; interaktiv informiert - allgegenwärtig und allumfassend!?
Y1  - 2012
SN  - 978-3-486-71990-1 (Print)
SN  - 978-3-486-71991-8 (E-Book)
U6  - https://doi.org/10.1524/9783486719918.341
N1  - Workshop Automotive HMI
SP  - 381
EP  - 388
PB  - Oldenbourg
CY  - München
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Buxbaum, Bernd
T1  - Layoutoptimierte PMD-Strukturen für die schnelle 3D-Erfassung
T2  - Messen in der Fertigung : 3D-Meßtechnik in Produktion und Entwicklung ; Fachtagung Optische Formerfassung ; Stuttgart, 5. - 6. Oktober 1999. - (Berichtsband / Deutsche Gesellschaft für Zerstörungsfreie Prüfung ; 70)
Y1  - 1999
SN  - 3-931381-30-7
N1  - Fachtagung Optische Formerfassung <1999, Stuttgart>
SP  - 233
EP  - 243
PB  - DGfZP
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Döring, Bernd
A1  - Frauenrath, Tobias
A1  - Groß, Rolf
A1  - Mohan, Nijanthan
A1  - Oyen, Marc
A1  - Schnittcher, Lukas
A1  - Voß, Norbert
ED  - Reiff-Stephan, Jörg
ED  - Jäkel, Jens
ED  - Schwarz, André
T1  - DiggiTwin: ein interdisziplinäres Projekt zur Nutzung digitaler Zwillinge auf dem Weg zu einem klimaneutralen Gebäudebestand
T2  - Tagungsband AALE 2024 : Fit für die Zukunft: praktische Lösungen für die industrielle Automation
N2  - Im Hinblick auf die Klimaziele der Bundesrepublik Deutschland konzentriert sich das Projekt Diggi Twin auf die nachhaltige Gebäudeoptimierung. Grundlage für eine ganzheitliche Gebäudeüberwachung und -optimierung bildet dabei die Digitalisierung und Automation im Sinne eines Smart Buildings. Das interdisziplinäre Projekt der FH Aachen hat das Ziel, ein bestehendes Hochschulgebäude und einen Neubau an klimaneutrale Standards anzupassen. Im Rahmen des Projekts werden bekannte Verfahren, wie das Building Information Modeling (BIM), so erweitert, dass ein digitaler Gebäudezwilling entsteht. Dieser kann zur Optimierung des Gebäudebetriebs herangezogen werden, sowie als Basis für eine Erweiterung des Bewertungssystems Nachhaltiges Bauen (BNB) dienen. Mithilfe von Sensortechnologie und künstlicher Intelligenz kann so ein präzises Monitoring wichtiger Gebäudedaten erfolgen, um ungenutzte Energieeinsparpotenziale zu erkennen und zu nutzen. Das Projekt erforscht und setzt methodische Erkenntnisse zu BIM und digitalen Gebäudezwillingen praxisnah um, indem es spezifische Fragen zur Energie- und Ressourceneffizienz von Gebäuden untersucht und konkrete Lösungen für die Gebäudeoptimierung entwickelt.
KW  - Anomalieerkennung
KW  - IoT
KW  - Überwachung & Optimierung
KW  - DiggiTwin
KW  - BIM
KW  - Smart Building
KW  - Digitalisierung
Y1  - 2024
SN  - 978-3-910103-02-3
U6  - https://doi.org/10.33968/2024.67
N1  - 20. AALE-Konferenz. Bielefeld, 06.03.-08.03.2024
(Tagungsband unter https://doi.org/10.33968/2024.29)
SP  - 341
EP  - 346
PB  - le-tex publishing services GmbH
CY  - Leipzig
ER  - 
TY  - CHAP
A1  - Kallweit, Stephan
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
A1  - Reichert, Walter
T1  - Mobile Autonome Systeme in der Lehre, am Beispiel der ROS Summer School
T2  - Tagungsband AALE 2014 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 11. Fachkonferenz, Regensburg ; [11. Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung / Ostbayerische Technische Hochschule Regensburg; VFAALE, Verein der Freunde und Förderer der Angewandten Automatisierungstechnik]
Y1  - 2014
SN  - 978-3-8356-7142-3
N1  - Die Textverteilung der elektronischen Zweitveröffentlichung entspricht nicht der der o.g. Verlagsausgabe.
SP  - 157
EP  - 163
PB  - Dt. Industrieverl.
CY  - München
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Schwarte, Rudolf
A1  - Ringbeck, Thorsten
ED  - Korevaar, Eric John
T1  - PMD-PLL: receiver structure for incoherent communication and ranging systems
T2  - Optical wireless communications II / [SPIE Conference on Optical Wireless Communications II], 22 September 1999, Boston, Massachusetts. - (SPIE proceedings series ; 3850)
Y1  - 1999
SN  - 0-8194-3443-4
SN  - 0038-7355
SN  - 0277-786X
N1  - Conference on Optical Wireless Communications <2, 1999, Boston, Mass.>
SP  - 116
EP  - 130
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Wallnöfer, Armin
A1  - Drath, Rainer
A1  - Hüning, Felix
T1  - Was ist Funktionales Engineering? Einordnung, Definition, Randbedingungen
T2  - Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
Y1  - 2015
SN  - 978-3-18-092258-4
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Köllensperger, P.
A1  - Bragard, Michael
A1  - Plum, T.
A1  - De Doncker, R. W.
T1  - The dual GCT : a new high-power device using optimized GCT technology
T2  - Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA
Y1  - 2007
SN  - 978-1-4244-1260-0 (Online)
SN  - 978-1-4244-1259-4 (Print)
U6  - https://doi.org/10.1109/07IAS.2007.76
SP  - 358
EP  - 365
PB  - IEEE Operations Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Wallenborn, Ramona
ED  - Boll-Westermann, Susanne
T1  - HMI mobiler Apps zur Organisation multimodaler Mobilität
T2  - Mensch & Computer 2013 - Workshopband : 13. fachübergreifende Konferenz für interaktive und kooperative Medien
Y1  - 2013
SN  - 978-3-486-77855-7 (Print)
SN  - 978-3-486-78123-6 (E-Book)
U6  - https://doi.org/10.1524/9783486781236
SP  - 103
EP  - 109
PB  - Oldenbourg
CY  - München
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Ronge, C.
A1  - De Doncker, R. W.
T1  - Sandwich design of high-power thyristor based devices with integrated MOSFET structure
T2  - Proceedings of the 2011 - 14th - European Conference on Power Electronics and Applications (EPE 2011) : Aug. 30, 2011 - Sept. 1, 2011, Birmingham, United Kingdom
Y1  - 2011
SN  - 978-1-61284-167-0 (Print)
SN  - 978-90-75815-15-3 (Online)
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Wolf, Martin R.
A1  - Lenz, Laura L.
T1  - The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)
T2  - IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16
Y1  - 2015
SN  - 978-1-4799-4823-9
U6  - https://doi.org/10.1109/SeGAH.2014.7067089
SP  - 135
EP  - 142
PB  - IEEE [u.a.]
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Schwarte, Rudolf
A1  - Buxbaum, Bernd
ED  - Korevaar, Eric John
T1  - Introduction of a new opto-electrical phase-locked loop in CMOS technology: the PMD-PLL
T2  - Optical wireless communications II / [SPIE Conference on Optical Wireless Communications II], 22 September 1999, Boston, Massachusetts. - (SPIE proceedings series ; 3850)
Y1  - 1999
SN  - 0-8194-3443-4
SN  - 0038-7355
SN  - 0361-0748
SN  - 0277-786X
N1  - Conference on Optical Wireless Communications <2, 1999, Boston, Mass.
SP  - 108
EP  - 116
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Gottschlich, J.
A1  - De Doncker, R. W.
T1  - Design and realization of a credit card size driver stage for high power thyristor based devices with integrated MOS structure
T2  - 2011 IEEE 8th International Conference on Power Electronics and ECCE Asia (ICPE & ECCE 2011) : Jeju, South Korea, 30 May 2011 - 3 June 2011 / [co-sponsored by the Korean Institute of Power Electronics ...]
Y1  - 2011
SN  - 978-1-61284-958-4 (Print)
SN  - 978-1-61284-956-0 (Online)
U6  - https://doi.org/10.1109/ICPE.2011.5944661
SP  - 1182
EP  - 1189
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Losse, Ann-Kathrin
A1  - Gehrke, Melanie
A1  - Ullrich, André
A1  - Czarnecki, Christian
A1  - Sultanow, Eldar
A1  - Breithaupt, Carsten
A1  - Koch, Christian
T1  - Entwicklung einer Open-Data-Referenzarchitektur für die Luftfahrtindustrie
T2  - INFORMATIK 2022 - Informatik in den Naturwissenschaften, Proceedings
N2  - Open Data impliziert die freie Zugänglichkeit, Verfügbarkeit und Wiederverwendbarkeit von Datensätzen. Obwohl hochwertige Datensätze öffentlich verfügbar sind, ist der Zugang zu diesen und die Transparenz über die Formate nicht immer gegeben. Dies mindert die optimale Nutzung des Potenzials zur Wertschöpfung, trotz der vorherrschenden Einigkeit über ihre Chancen. Denn Open Data ermöglicht das Vorantreiben von Compliance-Themen wie Transparenz und Rechenschaftspflicht bis hin zur Förderung von Innovationen. Die Nutzung von Open Data erfordert Mut und eine gemeinsame Anstrengung verschiedener Akteure und Branchen. Im Rahmen des vorliegenden Beitrags werden auf Grundlage des Design Science-Ansatzes eine Open Data Capability Map sowie darauf aufbauend eine Datenarchitektur für Open Data in der Luftfahrtindustrie an einem Beispiel entwickelt.
Y1  - 2022
SN  - 978-3-88579-720-3
U6  - https://doi.org/10.18420/inf2022_103
SN  - 1617-5468
N1  - INFORMATIK 2022, 26. - 30. September 2022, Hamburg
SP  - 1203
EP  - 1209
PB  - GI - Gesellschaft für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Penne, Jochen
A1  - Profittlich, Martin
A1  - Ringbeck, Thorsten
A1  - Buxbaum, Bernd
ED  - D, Nicola D'Apuzzo
T1  - Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras
T2  - Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010
Y1  - 2010
SN  - 978-3-033-02714-5
SP  - 361
EP  - 369
PB  - Hometrica Consulting
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Schwarte, Rudolf
A1  - Buxbaum, Bernd
A1  - Heinol, Horst-Guenther
A1  - Xu, Zhanping
A1  - Ringbeck, Thorsten
A1  - Zang, Zhigang
T1  - Novel 3D-vision systems based on layout optimized PMD-structures
T2  - Proceedings / OPTO 98, Internationaler Kongress und Fachausstellung für Optische Sensorik, Messtechnik und Elektronik, 18. - 20. Mai 1998, Kongreßzentrum Erfurt
Y1  - 1998
N1  - Internationaler Kongress und Fachausstellung für Optische Sensorik, Messtechnik & Elektronik <3, 1998, Erfurt> ; International Congress and Exhibition on Optoelectronics, Optical Sensors and Measuring Techniques <3, 1998, Erfurt> ; OPTO <3, 1998, Erfurt>
SP  - 197
EP  - 202
PB  - ACS Organisations GmbH
CY  - Wunsdorf
ER  - 
TY  - CHAP
A1  - Lenz, Laura L.
A1  - Wolf, Martin R.
ED  - Kritz, Willy Christian
T1  - Economic evaluation of serious games with the comparative assessment framework COSEGA
T2  - The shift from teaching to learning : individual, collective and organizational learning through gaming simulation ; proceedings of the 45th conference of the International Simulation and Gaming Association, Dornbirn 2014
Y1  - 2014
SN  - 978-3-7639-5422-3
SP  - 374
EP  - 386
PB  - Bertelsmann
CY  - [Bielefeld]
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Izquierdo Tello, César
A1  - Damm, Sebastian
T1  - Connecting a pedelec to the cloud as basis for gamification in multi modal mobility planning
T2  - MobileCloud 2014 : 2nd IEEE International Conference on Mobile Cloud Computing, Services, and Engineering Oxford, United Kingdom 7-10 April 2014
Y1  - 2014
SN  - 978-1-4799-2504-9
U6  - https://doi.org/10.1109/MobileCloud.2014.25
SP  - 101
EP  - 108
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Wittig, M.
A1  - Rütters, René
A1  - Bragard, Michael
ED  - Reiff-Stephan, Jörg
ED  - Jäkel, Jens
ED  - Schwarz, André
T1  - Application of RL in control systems using the example of a rotatory inverted pendulum
T2  - Tagungsband AALE 2024 : Fit für die Zukunft: praktische Lösungen für die industrielle Automation
N2  - In this paper, the use of reinforcement learning (RL) in control systems is investigated using a rotatory inverted pendulum as an example. The control behavior of an RL controller is compared to that of traditional LQR and MPC controllers. This is done by evaluating their behavior under optimal conditions, their disturbance behavior, their robustness and their development process. All the investigated controllers are developed using MATLAB and the Simulink simulation environment and later deployed to a real pendulum model powered by a Raspberry Pi. The RL algorithm used is Proximal Policy Optimization (PPO). The LQR controller exhibits an easy development process, an average to good control behavior and average to good robustness. A linear MPC controller could show excellent results under optimal operating conditions. However, when subjected to disturbances or deviations from the equilibrium point, it showed poor performance and sometimes instable behavior. Employing a nonlinear MPC Controller in real time was not possible due to the high computational effort involved. The RL controller exhibits by far the most versatile and robust control behavior. When operated in the simulation environment, it achieved a high control accuracy. When employed in the real system, however, it only shows average accuracy and a significantly greater performance loss compared to the simulation than the traditional controllers. With MATLAB, it is not yet possible to directly post-train the RL controller on the Raspberry Pi, which is an obstacle to the practical application of RL in a prototyping or teaching setting. Nevertheless, RL in general proves to be a flexible and powerful control method, which is well suited for complex or nonlinear systems where traditional controllers struggle.
KW  - Rotatory Inverted Pendulum
KW  - MPC
KW  - LQR
KW  - PPO
KW  - Reinforcement Learning
Y1  - 2024
SN  - 978-3-910103-02-3
U6  - https://doi.org/10.33968/2024.53
N1  - 20. AALE-Konferenz. Bielefeld, 06.03.-08.03.2024.
(Tagungsband unter https://doi.org/10.33968/2024.29)
SP  - 241
EP  - 248
PB  - le-tex publishing services GmbH
CY  - Leipzig
ER  - 
TY  - CHAP
A1  - Kramer, Pia
A1  - Bragard, Michael
A1  - Ritz, Thomas
A1  - Ferfer, Ute
A1  - Schiffers, Tim
T1  - Visualizing, Enhancing and Predicting Students’ Success through ECTS Monitoring
T2  - 2024 IEEE Global Engineering Education Conference (EDUCON)
N2  - This paper serves as an introduction to the ECTS monitoring system and its potential applications in higher education. It also emphasizes the potential for ECTS monitoring to become a proactive system, supporting students by predicting academic success and identifying groups of potential dropouts for tailored support services. The use of the nearest neighbor analysis is suggested for improving data analysis and prediction accuracy.
KW  - Monitoring
KW  - Engineering education
KW  - Data visualization
KW  - Accuracy
KW  - Data analysis
Y1  - 2024
U6  - https://doi.org/10.1109/EDUCON60312.2024.10578652
SN  - 2165-9559
SN  - 2165-9567 (eISSN)
N1  - 2024 IEEE Global Engineering Education Conference (EDUCON), 08-11 May 2024, Kos Island, Greece
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Hess, Holger
A1  - Ringbeck, Thorsten
ED  - Voges, Edgar
T1  - The photonic mixer device : new perspectives in optical wireless communication
T2  - International Workshop on Optical MEMS and Integrated Optics : Universität Dortmund, Universitätskolleg Bommerholz, 11. & 12. June 2001
Y1  - 2001
N1  - International Workshop on Optical MEMS and Integrated Optics <2001, Dortmund>
SP  - (12)1
EP  - (12)5
PB  - Univ.
CY  - Dortmund
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Albrecht, M.
A1  - Frey, J.
ED  - Lerch, Reinhard
T1  - Time-of-Flight 3D-camera for autonomous navigation and industrial automation
T2  - Proceedings : 11th international conference, 13 - 15 May 2003, Exhibition Centre Nuremberg, Germany ; an event of the Association for Sensor Technology, AMA
Y1  - 2003
N1  - Internationale Messe mit Kongress Sensor <Nürnberg>
PB  - AMA Service
CY  - Wunstorf/Germany
ET  - CD-ROM-Ausg.
ER  - 
TY  - CHAP
A1  - Hagebeuker, Bianca
A1  - Ringbeck, Thorsten
A1  - Frydlewicz, Paul
A1  - Jesorsky, Oliver
A1  - Sünkel, Thomas
ED  - Grote, Caspar
T1  - PMD-Sensoren als Schlüsselkomponenten für die mehrdimensionale Umfelderfassung des Fahrzeuginnenraums
T2  - Begleittexte zum Entwicklerforum KFZ-Elektronik & FlexRay Solution Day : 15.Mai 2007, Ludwigsburg
Y1  - 2007
N1  - Entwicklerforum Kfz-Elektronik <2007, Ludwigsburg> ; FlexRay Solution Day <2007, Ludwigsburg>
SP  - 287
EP  - 296
PB  - WEKA-Fachzeitschr.-Verl.
CY  - Poing
ER  - 
TY  - CHAP
A1  - Grothof, M.
A1  - Schwarte, Rudolf
A1  - Buxbaum, Bernd
A1  - Ringbeck, Thorsten
ED  - Wagner, Elmar
T1  - Product monitoring with MSM-PMD-Array
T2  - Proceedings / OPTO 2002 : an event of the Association for Sensor Technology AMA ; 14 - 16 May 2002, Exhibition Centre Erfurt, Germany / International Conference Optoelectronics, Optical Sensors & Measuring Techniques
Y1  - 2002
N1  - OPTO <5, 2002, Erfurt> ; International Conference Optoelectronics, Optical Sensors & Measuring Techniques
SP  - 41
EP  - 47
PB  - AMA Service GmbH
CY  - Wunsdorf
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Schwarte, Rudolf
A1  - Ringbeck, Thorsten
A1  - Grothof, Markus
A1  - Sluiter, A.
A1  - Frey, Jochen
A1  - Hildebrand, M.
A1  - David, Klaus
ED  - Korevaar, Eric John
T1  - Wireless LAN based on optical CDMA using a new high-speed correlation receiver (MSM-PMD)
T2  - Optical wireless communications IV : 21-22 August, 2001, Denver, USA. - (SPIE proceedings series ; 4530)
Y1  - 2001
SN  - 0-8194-4254-2
U6  - https://doi.org/10.1117/12.449808
N1  - Optical Wireless Communications Conference <4, 2001, Denver, Colo.>
SP  - 168
EP  - 178
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Nötzold, K.
A1  - Uphues, A.
A1  - Wegener, R.
A1  - Fink, K.
A1  - Bragard, Michael
A1  - Griessel, R.
A1  - Soter, S.
T1  - Inverter based test setup for LVRT verification of a full-scale 2 MW wind power converter
T2  - 15th European Conference on Power Electronics and Applications (EPE), 2013 : 2 - 6 Sept. 2013, Lille, France / [EPE Association; PELS, IEEE Power Electronics Society]
Y1  - 2013
SN  - 978-1-4799-0115-9 (Online-Ausg.)
U6  - https://doi.org/10.1109/EPE.2013.6634752
SP  - 1037
EP  - 1042
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Ellerweg, Roland
A1  - Ritz, Thomas
ED  - Roth, Jörg
T1  - Tool supported requirements analysis for the user centered development of mobile enterprise software
T2  - Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands
N2  - A user centered development method has proved satisfactory for the development of mobile enterprise software. To make use of this method, detailed information about the user and the place where the user interacts with his mobile device is required. This article describes how both can be modeled by a stereotypical and conceptual extended UML extension. Finally, a software tool is presented that supports the developed UML extension.
Y1  - 2008
SN  - 978-972-8924-62-1
SP  - 160
EP  - 162
PB  - IADIS Press
CY  - [Lisboa]
ER  - 
TY  - CHAP
A1  - Lindner, Marvin
A1  - Kolb, Andreas
A1  - Ringbeck, Thorsten
T1  - New insights into the calibration of ToF-sensors
T2  - 2008 IEEE Computer Society Conference on Computer Vision and Pattern Recognition workshops : Anchorage, AK, 23 - 28 June 2008
N2  - Time-of-flight (ToF) sensors have become an alternative to conventional distance sensing techniques like laser scanners or image based stereo. ToF sensors provide full range distance information at high frame-rates and thus have a significant impact onto current research in areas like online object recognition, collision prevention or scene reconstruction. However, ToF cameras like the photonic mixer device (PMD) still exhibit a number of challenges regarding static and dynamic effects, e.g. systematic distance errors and motion artefacts, respectively. Sensor calibration techniques reducing static system errors have been proposed and show promising results. However, current calibration techniques in general need a large set of reference data in order to determine the corresponding parameters for the calibration model. This paper introduces a new calibration approach which combines different demodulation techniques for the ToF- camera 's reference signal. Examples show, that the resulting combined demodulation technique yields improved distance values based on only two required reference data sets.
Y1  - 2008
SN  - 978-1-4244-2339-2
SN  - 978-1-4244-2340-8
SP  - 1
EP  - 5
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Soltau, N.
A1  - De Doncker, R. W.
A1  - Schmiegel, A.
T1  - Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - https://doi.org/10.1109/ECCE.2010.5618220
SP  - 2944
EP  - 2949
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Conrad, M.
A1  - De Doncker, R. W.
T1  - The integrated emitter turn-off thyristor (IETO) : an innovative thyristor based high power semiconductor device using MOS assisted turn-off
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - https://doi.org/10.1109/ECCE.2010.5618410
SP  - 4551
EP  - 4557
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - Personalized information services : an electronic information commodity and its production
T2  - Electronic publishing '01 : 2001 in the digital publishing odyssey ; proceedings of an ICCC/IFIP conference held at the University of Kent at Canterbury, Kent, United Kingdom, 5 - 7 July, 2001 ; [proceedings of the Fifth Conference on Electronic Publishing]
Y1  - 2001
SN  - 1-58603-191-0
SP  - 48
EP  - 58
PB  - IOS Press [u.a.]
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Hofmann, Till
A1  - Mataré, Victor
A1  - Neumann, Tobias
A1  - Schönitz, Sebastian
A1  - Henke, Christoph
A1  - Limpert, Nicolas
A1  - Niemueller, Tim
A1  - Ferrein, Alexander
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - Enhancing Software and Hardware Reliability for a Successful Participation in the RoboCup Logistics League 2017
Y1  - 2018
SN  - 978-3-030-00308-1
U6  - https://doi.org/10.1007/978-3-030-00308-1_40
N1  - Lecture Notes in Computer Science, vol 11175
SP  - 486
EP  - 497
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - 3D-Mapping von Straßentunneln
T2  - 16. Geokinematischer Tag, 07. und 08. Mai 2015 : Tagungsband / Technische Universität Bergakademie Freiberg
Y1  - 2015
N1  - Schriftenreihe des Instituts für Markscheidewesen und Geodsäsie an der Technischen Universität Bergakademie Freiberg
SP  - 31
EP  - 40
ER  - 
TY  - CHAP
A1  - Hüning, Felix
A1  - Heuermann, Holger
A1  - Wache, Franz-Josef
T1  - Wireless CAN
T2  - Tagungsband AALE 2018 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 15. Fachkonferenz, Regensburg ; [15. Konferenz für Angewandte Automatisierungstechnik in Lehre und Entwicklung / TH Köln; VFAALE, Verein der Freunde und Förderer der Angewandten Automatisierungstechnik]
N2  - Das vorgestellte System zu Wireless CAN bietet die Möglichkeit, CAN kabellos zu übertragen. Beide vorgestellten und entwickelten Konzepte funktionieren korrekt und ermöglichen den Auf-bau von kabellosen CAN Schnittstellen. Durch den kleinen Aufbau kann diese Technologie auch für eingebettete Systeme verwendet werden. Zudem bietet dieser Ansatz die Möglichkeit, durch die Entwicklung von geeigneten ICs die Größe des Systems bis auf Bauteilgröße zu reduzieren, um eine noch bessere Integration in eingebettete Systeme zu ermöglichen. Dadurch wird die Technologie attraktiv für Einsatzgebiete, wo die oben aufgelisteten Vorteile zum Tragen kommen können. Diese Einsatzgebiete können sowohl im Automobil als auch im Industriebereich liegen.
Y1  - 2018
SP  - 135
EP  - 144
PB  - VDE Verlag
ER  - 
TY  - CHAP
A1  - Becker, Willi
A1  - Wolf, Martin R.
T1  - Entwicklung eines Einführungskonzepts für IT-Service-Management in KMU
T2  - Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian Müller, Christian Seel
N2  - Obwohl es eine Vielzahl von Einführungskonzepten für ITSM gibt, hat sich bisher keines dieser Konzepte auf breiter Linie durchgesetzt. Das gilt in erhöhtem Maße für ITSM-Einführungskonzepte für KMU, wohl nicht zuletzt aufgrund der Tatsache, dass der Mehrwert von ITSM für KMU aufgrund der geringeren Größe der IT-Organisationen nur entsprechend schwieriger generiert werden kann.
Mit diesem Beitrag wird ein Einführungskonzept für ITSM in KMU systematisch hergeleitet. Dafür wurden zunächst die Treiber und Barrieren von ITSM untersucht, um daraus ein umfassendes Wirkmodell zu entwickeln. Da mit diesem Wirkungsmodell die Einflussfaktoren auf den Erfolg von ITSM in KMU deutlich werden, konnte auf dieser Basis ein Einführungskonzept abgeleitet werden, welches insbesondere die positiven Effekte unterstützt bzw.
verstärkt.
Y1  - 2019
SN  - 978-3-944330-62-4
SP  - 129
EP  - 137
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Wolf, Martin R.
A1  - Barton, Thomas
A1  - Herrmann, Frank
A1  - Meister, Vera G.
A1  - Müller, Christian
A1  - Seel, Christian
T1  - Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule für Angewandte Wissenschaften Aachen / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian Müller, Christian Seel
N2  - Tagungsbeiträge aus den Bereichen Projektmanagement, Didaktik in der Wirtschaftsinformatik, IT-Sicherheit, Anwendungsfälle, Reifegradmodelle, Plattformen für Geschäftsprozesse und Prototypen.
Y1  - 2019
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:526-opus4-13026
SN  - 978-3-944330-62-4
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Arndt, Tobias
A1  - Conzen, Max
A1  - Elsen, Ingo
A1  - Ferrein, Alexander
A1  - Galla, Oskar
A1  - Köse, Hakan
A1  - Schiffer, Stefan
A1  - Tschesche, Matteo
T1  - Anomaly detection in the metal-textile industry for the reduction of the cognitive load of quality control workers
T2  - PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments
N2  - This paper presents an approach for reducing the cognitive load for humans working in quality control (QC) for production processes that adhere to the 6σ -methodology. While 100% QC requires every part to be inspected, this task can be reduced when a human-in-the-loop QC process gets supported by an anomaly detection system that only presents those parts for manual inspection that have a significant likelihood of being defective. This approach shows good results when applied to image-based QC for metal textile products.
KW  - Datasets
KW  - Neural networks
KW  - Anomaly detection
KW  - Quality control
KW  - Process optimization
Y1  - 2023
SN  - 9798400700699
U6  - https://doi.org/10.1145/3594806.3596558
N1  - PETRA '23: Proceedings of the 16th International Conference on PErvasive Technologies Related to Assistive Environments, Corfu, Greece, July 5 - 7, 2023
SP  - 535
EP  - 542
PB  - ACM
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Efficient Hashing Algorithm for NN Problem in HD Spaces
T2  - Lecture Notes in Computer Science
Y1  - 2019
SN  - 978-303005498-4
U6  - https://doi.org/10.1007/978-3-030-05499-1_6
N1  - 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018; Funchal; Portugal; 16 January 2018 through 18 January 2018; Code 222779
SP  - 101
EP  - 115
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Sadeghfam, Arash
T1  - Analog Amplitude-Locked Loop Circuit to Support RF Energy Solutions
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2016
SN  - 978-150900698-4
U6  - https://doi.org/10.1109/MWSYM.2016.7540092
ER  - 
TY  - CHAP
A1  - Damm, Sebastian
A1  - Ritz, Thomas
A1  - Strauch, Jakob
ED  - Höpfner, Hagen
T1  - Muster und Cloud Computing als Plattformstrategie für mobile Unternehmenssoftware
T2  - Mobile und ubiquitäre Informationssysteme : MMS 2011 ; proceedings der 6. Konferenz, 28. Februar 2011 in Kaiserslautern, Deutschland. - (GI-Edition lecture notes in informatics ; 185)
Y1  - 2011
SN  - 978-3-88579-279-6
SP  - 91
EP  - 104
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Stender, Michael
ED  - Pousttchi, Key
T1  - Modellierung von Business-to-Business Geschäftsprozessen im Mobile Commerce
T2  - Mobile Commerce - Anwendung und Perspektiven : [proceedings zum] 3. Workshop Mobile Commerce, Universität Augsburg, 04.02.2003. - (GI-Edition : Proceedings ; 25)
Y1  - 2003
SN  - 3-88579-354-7
SP  - 27
EP  - 41
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Nachtrodt, Frederik
A1  - Heuermann, Holger
A1  - Scherer, Ulrich W.
A1  - Mostacci, Domiziano
A1  - Finger, Torsten
A1  - Tietsch, Wolfgang
T1  - A novel 2.45 GHz/200 W Microwave Plasma Jet for High Temperature Applications above 3600 K
T2  - Journal of Physics : Conference Series
Y1  - 2012
SN  - 1742-6596
VL  - 406
IS  - 012029
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Lakemeyer, Gerhard
A1  - Ferrein, Alexander
T1  - Aspects of integrating diverse software into robotic systems extended abstract
T2  - ICRA 2013 - 8th Workshop on Software Development and Integration in Robotics (SDIR), Karlsruhe, Germany
Y1  - 2013
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Harzheim, Thomas
A1  - Mühmel, Marc
T1  - A maritime harmonic radar search and rescue system using passive and active tags
T2  - 2020 17th European Radar Conference (EuRAD)
N2  - This article introduces a new maritime search and rescue system based on S-band illumination harmonic radar (HR). Passive and active tags have been developed and tested attached to life jackets and a rescue boat. This system was able to detect and range the active tags up to a range of 5800 m in tests on the Baltic Sea with an antenna input power of only 100 W. All electronic GHz components of the system, excluding the S-band power amplifier, were custom developed for this purpose. Special attention is given to the performance and conceptual differences between passive and active tags used in the system and integration with a maritime X-band navigation radar is demonstrated.
KW  - Harmonic Radar
KW  - Rescue System
KW  - Frequency Doubler
KW  - Transponder
KW  - Tag
Y1  - 2021
SN  - 978-2-87487-061-3
U6  - https://doi.org/10.1109/EuRAD48048.2021.00030
N1  - 17th European Radar Conference, 13th - 15th January 2021, Utrecht, Netherlands
SP  - 73
EP  - 76
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - CRVM: Circular Random Variable-based Matcher - A Novel Hashing Method for Fast NN Search in High-dimensional Spaces
T2  - Proceedings of the 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018
Y1  - 2018
SN  - 978-989-758-276-9
U6  - https://doi.org/10.5220/0006692802140221
SP  - 214
EP  - 221
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - Optimized KinectFusion Algorithm for 3D Scanning Applications
T2  - Proceedings of the 11th International Joint Conference on Biomedical Engineering Systems and Technologies - Volume 2: BIOIMAGING
Y1  - 2018
SN  - 978-989-758-278-3
U6  - https://doi.org/10.5220/0006594700500057
SP  - 50
EP  - 57
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - Robots: challenges, chances and risks for solving 21st century problems
T2  - President’s Invitation Lecture / South African Institute of Electrical Engineers : May 21 & 22, 2015, University of Johannesburg
Y1  - 2015
SP  - 1
EP  - 45
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
ED  - König-Ries, Brigitta
T1  - Die benutzerzentrierte Entwicklung mobiler Unternehmenssoftware
T2  - MMS 2007: Mobilität und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany
Y1  - 2007
SN  - 978-3-88579-198-0
SP  - 23
EP  - 35
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
T1  - DISMED - an innovation portal for printing and media industry
T2  - CRIS 2000 : the fifth conference on Current Research Information Systems in Europe, in Helsinki (Finland), 25-27 May 2000
Y1  - 2001
N1  - Programmpunkt: Cybercafé.
PB  - CORDIS Archive
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Sadeghfam, Arash
T1  - Universaler Plasmajet für verschiedene Behandlungsschritte der Klebetechnik
T2  - Tagungsband / 15. Kolloquium Gemeinsame Forschung in der Klebtechnik : 3. und 4. März 2015, Maternushaus, Köln / DECHEMA
Y1  - 2015
SP  - 85
EP  - 87
CY  - Köln
ER  - 
TY  - CHAP
A1  - Moll, Florian
A1  - Köhler, Klemens
A1  - Wolf, Martin R.
T1  - Konzeption von IT-Sicherheitslösungen unter ethischen Gesichtspunkten am Beispiel einer Monitoring-App für mobile Endgeräte
T2  - Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung
N2  - Die steigende Popularität von mobilen Endgeräten im privaten und geschäftlichen Umfeld geht mit einem Anstieg an Sicherheitslücken und somit potentiellen Angriffsflächen einher. Als ein Element der technischen und organisatorischen Maßnahmen zum Schutz eines Netzwerkes können Monitoring-Apps dienen, die unerwünschtes Verhalten und Angriffe erkennen. Die automatisierte Überwachung von Endgeräten ist jedoch rechtlich und ethisch komplex. Dies in Kombination mit einer hohen Sensibilität der Nutzer und Nutzerinnen dieser Geräte in Bezug auf Privatsphäre, kann zu einer geringen Akzeptanz und Compliance führen. Eine datenschutzrechtlich und ethisch einwandfreie Konzeption solcher Apps bereits im Designprozess führt zu höherer Akzeptanz und verbessert so die Effizienz. Diese Analyse beschreibt Möglichkeiten zur Umsetzung.
Y1  - 2019
SN  - 978-3-944330-62-4
SP  - 61
EP  - 72
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Strauch, Jakob
ED  - Bick, Markus
T1  - „Offline Strategie"-Patterns für mobile SOA Prozesse
T2  - Mobile und ubiquitäre Informationssysteme : Technologien, Anwendungen und Dienste zur Unterstützung von mobiler Kollaboration ; Proceedings zur 5. Konferenz Mobile und Ubiquitäre Informationssysteme (MMS 2010) ; 23. - 25. Februar 2010 in Göttingen, Germany. - (GI-Edition : Proceedings ; 163)
Y1  - 2010
SN  - 978-3-88579-257-4
SP  - 174
EP  - 180
PB  - Gesellschaft für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Bischof, Michael
A1  - Ey, Ludger
A1  - Kuck, Alexander
A1  - Rahier, Michael
A1  - Ritz, Thomas
ED  - Weisbecker, Anette
T1  - Nutzerzentrierte Gestaltung und Entwicklung eines kontextsensitiven HMI
T2  - Mensch und Computer 2015 : Workshop
Y1  - 2015
SN  - 978-3-11-044333-2
SP  - 467
EP  - 474
PB  - De Gruyter Oldenbourg
CY  - Berlin
ER  - 
TY  - CHAP
A1  - König, Johannes Alexander
A1  - Wolf, Martin R.
ED  - Stephanidis, C.
T1  - The pyramid assessment framework for ‘competence developing games’
T2  - Communications in Computer and Information Science
Y1  - 2016
SN  - 978-331940541-4
U6  - https://doi.org/10.1007/978-3-319-40542-1_37
SN  - 1865-0929
N1  - 18th International Conference on Posters’ Extended Abstracts, HCI International 2016; Toronto; Canada; 17 July 2016 through 22 July 2016
VL  - 618
SP  - 232
EP  - 237
PB  - Springer
ER  - 
TY  - CHAP
A1  - Marco, Heather G.
A1  - Ferrein, Alexander
T1  - AGNES: The African-German Network of Excellence in Science
T2  - Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017
Y1  - 2017
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Fuchs, Britta
A1  - Ritz, Thomas
T1  - Usability for Blended Shopping - Solving Major Flaws by Applying Usability Engineering and Proven Integration Technologies
T2  - Proceedings of the 11th International Conference on e-Business, ICE-B 2014, Vienna, Austria
Y1  - 2014
SN  - 978-989-758-043-7
U6  - https://doi.org/10.5220/0005113502160223
SP  - 216
EP  - 223
ER  - 
TY  - CHAP
A1  - Harzheim, Thomas
A1  - Heuermann, Holger
T1  - Phase Repeatable Synthesizers as a New Harmonic Phase Standard for Nonlinear Network Analysis
T2  - IEEE Transactions on Microwave Theory and Techniques
Y1  - 2018
U6  - https://doi.org/10.1109/TMTT.2018.2817513
SP  - 1
EP  - 8
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Küppers, Malte
A1  - Schuba, Marko
A1  - Neugebauer, Georg
A1  - Höner, Tim
A1  - Hack, Sacha
T1  - Security analysis of the KNX smart building protocol
T2  - ARES '23: Proceedings of the 18th International Conference on Availability, Reliability and Security
N2  - KNX is a protocol for smart building automation, e.g., for automated heating, air conditioning, or lighting. This paper analyses and evaluates state-of-the-art KNX devices from manufacturers Merten, Gira and Siemens with respect to security. On the one hand, it is investigated if publicly known vulnerabilities like insecure storage of passwords in software, unencrypted communication, or denialof-service attacks, can be reproduced in new devices. On the other hand, the security is analyzed in general, leading to the discovery of a previously unknown and high risk vulnerability related to so-called BCU (authentication) keys.
Y1  - 2023
U6  - https://doi.org/10.1145/3600160.3605167
N1  - ARES 2023: The 18th International Conference on Availability, Reliability and Security. August 29 - September 1, 2023. Benevento, Italy.

Article No.: 87
SP  - 1
EP  - 7
PB  - ACM
ER  - 
TY  - CHAP
A1  - Stephan, Achim
A1  - Heuermann, Holger
A1  - Prantner, Michael
T1  - Cutting human tissue with novel atmospheric-pressure microwave plasma jet
T2  - 46th European Microwave Conference (EuMC)
Y1  - 2016
SN  - 978-2-87487-043-9
U6  - https://doi.org/10.1109/EuMC.2016.7824490
SP  - 902
EP  - 905
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Eltester, Niklas Sebastian
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - A smart factory setup based on the RoboCup logistics league
T2  - 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)
N2  - In this paper we present SMART-FACTORY, a setup for a research and teaching facility in industrial robotics that is based on the RoboCup Logistics League. It is driven by the need for developing and applying solutions for digital production. Digitization receives constantly increasing attention in many areas, especially in industry. The common theme is to make things smart by using intelligent computer technology. Especially in the last decade there have been many attempts to improve existing processes in factories, for example, in production logistics, also with deploying cyber-physical systems. An initiative that explores challenges and opportunities for robots in such a setting is the RoboCup Logistics League. Since its foundation in 2012 it is an international effort for research and education in an intra-warehouse logistics scenario. During seven years of competition a lot of knowledge and experience regarding autonomous robots was gained. This knowledge and experience shall provide the basis for further research in challenges of future production. The focus of our SMART-FACTORY is to create a stimulating environment for research on logistics robotics, for teaching activities in computer science and electrical engineering programmes as well as for industrial users to study and explore the feasibility of future technologies. Building on a very successful history in the RoboCup Logistics League we aim to provide stakeholders with a dedicated facility oriented at their individual needs.
Y1  - 2020
U6  - https://doi.org/10.1109/ICPS48405.2020.9274766
N1  - 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS), 10-12 June 2020, Tampere, Finland.
SP  - 297
EP  - 302
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Potgieter, Anet
A1  - Steinbauer, Gerald
T1  - Self-aware robots - What do we need from learning, deliberation, and reactive control?
T2  - HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009
Y1  - 2009
SP  - 1
EP  - 5
PB  - AAAI Pr.
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Köllensperger, P.
A1  - De Doncker, R. W.
ED  - Dmowski, Antoni
T1  - Der Internally Commutated Thyristor (ICT) : ein neuartiger GCT mit integrierter Ausschalteinheit
T2  - "Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne
Y1  - 2007
SN  - 83-918709-7-9
SP  - 7.1
EP  - 7.9
PB  - APS Energia
CY  - Warszawa
ER  - 
TY  - CHAP
A1  - Pisarczyk, Rafael
A1  - Ritz, Thomas
A1  - Sachtleben, Johanna
ED  - Boll-Westermann, Susanne
T1  - KMU-taugliche Modelle zur Entwicklung gebrauchstauglicher mobiler Unternehmenssoftware
T2  - Mensch & Computer 2013 - Workshopband : 13. fachübergreifende Konferenz für interaktive und kooperative Medien
Y1  - 2013
SN  - 978-3-486-77855-7 (Print)
SN  - 978-3-486-78123-6 (E-Book)
U6  - https://doi.org/10.1524/9783486781236
SP  - 29
EP  - 38
PB  - Oldenbourg
CY  - München
ER  - 
TY  - CHAP
A1  - Grund, Raphael M.
A1  - Altherr, Lena
ED  - Reiff-Stephan, Jörg
ED  - Jäkel, Jens
ED  - Schwarz, André
T1  - Development of an open source energy disaggregation tool for the home automation platform Home Assistant
T2  - Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel
N2  - In order to reduce energy consumption of homes, it is important to make transparent which devices consume how much energy. However, power consumption is often only monitored aggregated at the house energy meter. Disaggregating this power consumption into the contributions of individual devices can be achieved using Machine Learning. Our work aims at making state of the art disaggregation algorithms accessibe for users of the open source home automation platform Home Assistant.
KW  - Home Automation Platform
KW  - Home Assistant
KW  - Open Source
KW  - Machine Learning
KW  - Energy Disaggregation
Y1  - 2023
SN  - 978-3-910103-01-6
U6  - https://doi.org/10.33968/2023.02
N1  - 19. AALE-Konferenz. Luxemburg, 08.03.-10.03.2023.
BTS Connected Buildings & Cities Luxemburg
(Tagungsband unter https://doi.org/10.33968/2023.01)
SP  - 11
EP  - 20
PB  - le-tex publishing services GmbH
CY  - Leipzig
ER  - 
TY  - CHAP
A1  - Hüning, Felix
A1  - Mund, Cindy
T1  - Integration of agile development in standard labs
T2  - 51st Annual Conference of the European Society for Engineering Education (SEFI)
N2  - In addition to the technical content, modern courses at university should also teach professional skills to enhance the competencies of students towards their future work. The competency driven approach including technical as well as professional skills makes it necessary to find a suitable way for the integration into the corresponding module in a scalable and flexible manner. Agile development, for example, is essential for the development of modern systems and applications and makes use of dedicated professional skills of the team members, like structured group dynamics and communication, to enable the fast and reliable development. This paper presents an easy to integrate and flexible approach to integrate Scrum, an agile development method, into the lab of an existing module. Due to the different role models of Scrum the students have an individual learning success, gain valuable insight into modern system development and strengthen their communication and organization skills. The approach is implemented and evaluated in the module Vehicle Systems, but it can be transferred easily to other technical courses as well. The evaluation of the implementation considers feedback of all stakeholders, students, supervisor and lecturers, and monitors the observations during project lifetime.
KW  - professional skills
KW  - active learning
KW  - lab work
KW  - Agile development
Y1  - 2023
U6  - https://doi.org/10.21427/NK4Z-WS73
N1  - 51st Annual Conference of the European Society for Engineering Education, Technological University Dublin, 10th-14th September, 2023
ER  - 
TY  - CHAP
A1  - Schmiegel, A.
A1  - Koch, K.
A1  - Dittmer, M.
A1  - Braun, M.
A1  - Landau, M.
A1  - Dick, C.
A1  - Bragard, Michael
A1  - [u.a.], 
T1  - Das Sol-ion System : ein System zur Optimierung des Eigenverbrauchs von PV-Strom
T2  - Photovoltaische Solarenergie : 25. Symposium ; 03. - 05. März 2010, Kloster Banz, Bad Staffelstein. - (Wissen für Profis)
Y1  - 2010
SN  - 978-3-941785-23-6
SP  - 354
EP  - 359
PB  - OTTI, Ostbayerisches Technologie-Transfer-Inst.
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Hagebeuker, Bianca
ED  - Grün, Armin
T1  - A 3D time of flight camera of object detection
T2  - Optical 3-D measurement techniques VIII : applications in GIS, mapping, manufacturing, quality control, robotics, navigation, mobile mapping, medical imaging, cultural heritage, VR generation and animation; papers presented to the conference organized at ETH Zurich, Switzerland, July 9 - 12, 2007. - Vol. 1
Y1  - 2007
SN  - 3-906467-67-8 (Gesamtwerk)
N1  - Conference on Optical 3-D Measurement Techniques <8, 2007, Zürich>
SP  - 1
EP  - 16
PB  - ETH
CY  - Zürich
ER  -