TY  - CHAP
A1  - Kern, Alexander
A1  - Dikta, Gerhard
T1  - Probability of damage of electrical and electronic systems due to indirect lightning flashes - investigation of data from German insurance companies
N2  - In the presented paper data collected from the field related to damage statistics of electrical and electronic apparatus in household are reported and investigated. These damages (total number approx. 74000 cases), registered by five German insurance companies in 2005 and 2006, were adviced by customers as caused by lightning overvoltages. With the use of stochastical methods it is possible, to reasses the collected data and to distinguish between cases, which are with high probability caused by lightning overvoltages, and those, which are not. If there was an indication for a direct strike, this case was excluded, so the focus was only on indirect lightning flashes, i.e. only flashes to ground near the structure and flashes to or nearby an incoming service line were investigated. The data from the field contain the location of damaged apparatus (residence of the policy holder) and the distances of the nearest cloud-to-ground stroke to the location of the damage registered by the German lightning location network BLIDS at the date of damage. The statistical data along with some complementary numerical simulations allow to verify the correspondence of the Standards rules used for IEC 62305-2 with the field data and to define some correction needs. The results could lead to a better understanding whether a damage reported to an insurance company is really caused by indirect lightning, or not.
KW  - Blitzschutz
KW  - lightning flash
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Hardt, Arno
A1  - Abdel-Gawad, A
A1  - Martin, S.
A1  - Reich, J.
T1  - Design procedures for the Juelich QQDDQ high resolution spectrometer
T2  - Proceedings, 5th International Conference on Magnet Technology (MT-5) : Rome, Italy, April 21-25, 1975
Y1  - 1975
SP  - 45
EP  - 51
ER  - 
TY  - CHAP
A1  - Martin, S.
A1  - Berg, G.
A1  - Hardt, Arno
A1  - Hürlimann, W.
A1  - Köhler, M.
A1  - Meißberger, J.
A1  - Sagefka, T.
A1  - Schult, O. W. B.
ED  - Sanderson, N. E.
T1  - First experience with the magnet spectrometer 'BIG KARL'
T2  - Use of magnetic spectrometers in nuclear physics : proceedings of the Daresbury study weekend 10 - 11 March 1979
Y1  - 1979
SP  - 38
EP  - 42
PB  - Daresbury Lab.
CY  - Daresbury
ER  - 
TY  - CHAP
A1  - Dören, Horst-Peter
T1  - The examination of surfaces of cold rolled wire for gas-shielded arc-welding
T2  - WAI/BISPA joint conference : proceedings. Joint conference of Wire Association International and the British Independent Steel Producers Association (WAI/BISPA) : 26 - 27. 09. 1988, Stratford-upon-Avon
Y1  - 1988
SP  - 102
EP  - 112
CY  - Guilford, Conn.
ER  - 
TY  - CHAP
A1  - Haissig, M.
A1  - Dören, Horst-Peter
A1  - Stadler, P.
T1  - The horizontal continuous casting process of steel - a contribution to the economic production of unalloyed, alloyed and high alloyed steel
T2  - VOEST-Alpine Continuous Casting Conference : 12.-15. 10.1981, Johannes-Keppler-Universität Linz
Y1  - 1981
SP  - Vortrag 21
CY  - Linz
ER  - 
TY  - CHAP
A1  - Pfundt, H.
A1  - Vogelsang, D.
A1  - Gerling, Ulrich
T1  - Calculation of the crust profile in aluminium reduction cells by thermal computer modelling
T2  - Light metals 1989 : 118th annual meeting of the Minerals, Metals and Materials Society, Las Vegas, NV, Feb. 27 - Mar. 03. 1989
Y1  - 1988
SP  - 371
EP  - 377
PB  - Minerals, Metals and Materials Soc.
CY  - Warrendale, Pa.
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Hartung, I.
A1  - Dilger, Klaus
A1  - Böhm, Stefan
T1  - Quality assurance of manual guided joining and welding devices
T2  - Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore
Y1  - 2009
SN  - 9789810832605
SP  - 219
EP  - 222
PB  - International Institute of Welding
CY  - Roissy
ER  - 
TY  - CHAP
A1  - Goldbach, Daniel
A1  - Ament, Christoph
ED  - Scharff, Peter
T1  - Stabilized reversing with vehicle trailer combinations
T2  - Crossing borders within the ABC : automation, biomedical engineering and computer science; proceedings; 55. IWK Internationales Wissenschaftliches Kolloquium; 13 - 17 September 2010, Ilmenau
Y1  - 2010
SN  - 978-3-938843-53-6
SP  - 352
EP  - 357
PB  - Verl. ISLE
CY  - Ilmenau
ER  - 
TY  - CHAP
A1  - Hartung, I.
A1  - Dilger, Klaus
A1  - Hellmanns, Mark
A1  - Böhme, Stefan
T1  - Repair of non-weldable steel structures to extend the life cycle
T2  - Proceedings of the IIW International Conference on Advances in Welding and Allied Technologies : July 16 - 17, 2009, Singapore. (Welding in the world ; 53.2009, special issue)
Y1  - 2009
SN  - 978-981-08-3259-9
SP  - 569
EP  - 574
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Böhm, Stefan
A1  - Dilger, Klaus
T1  - Weight and noise reduction in power transmissions through epoxy resin foams
T2  - Proceedings of the 31st annual meeting of the Adhesion Society : 17. - 20.2.2008, Austin, Texas
Y1  - 2008
SP  - 291
EP  - 293
PB  - Adhesion Society
CY  - Blacksburg
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Böhm, Stefan
A1  - Dilger, Klaus
T1  - Implementation of a velocity controlled manual applicator for adhesives and sealants in the automotive industry in consideration of quality control
T2  - Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida
Y1  - 2006
SN  - 1086-9506
SP  - 68
EP  - 70
PB  - Adhesion Society
CY  - Blacksburg, Va.
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Böhm, Stefan
A1  - Dilger, Klaus
T1  - Progress of the manual application of adhesives
T2  - Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China
Y1  - 2006
SP  - 275
EP  - 277
PB  - Beijing Adhesion Society of China
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Böhm, Stefan
A1  - Hellmanns, Mark
A1  - Backes, Andreas
A1  - Dilger, Klaus
T1  - Lock-in thermography based NDT of automotive parts
T2  - Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China
Y1  - 2006
SP  - 382
EP  - 384
PB  - Beijing Adhesion Society of China
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Stollenwerk, Dominik
A1  - Kuvarakul, T.
A1  - Kuperjans, Isabel
T1  - Renewable energy supply for power dominated, energy intense production processes - a systematic conversion approach for the anodizing process
T2  - IOP conference series: Earth and environmental science (EES)
Y1  - 2013
SN  - 1755-1315
SN  - 1755-1307
VL  - Vol. 16
IS  - H. 1
SP  - 012142/1
EP  - 012142/4
ER  - 
TY  - CHAP
A1  - Takenaga, Shoko
A1  - Herrera, Cony F.
A1  - Werner, Frederik
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
A1  - Öhlschläger, Peter
A1  - Wagner, Torsten
T1  - Detection of the metabolic activity of cells by differential measurements based on a single light-addressable potentiometric sensor chip
T2  - 11. Dresdner Sensor-Symposium : 9.-11.12.2013
Y1  - 2013
SN  - 978-3-9813484-5-3
SP  - 63
EP  - 67
ER  - 
TY  - CHAP
A1  - Feldhusen, Jörg
A1  - Brezing, Alexander Nikolaus
A1  - Pütz, Claus
A1  - Wählisch, Georg
T1  - Multi-system CAD-teaching in large classes
T2  - When design education and design research meet : proceedings of the 12th International Conference on Engineering and Product Design Education, Norwegian University of Science and Technology (NTNU) Trondheim, Norway, 2nd - 3rd September 2010 ; [E&PDE]
Y1  - 2010
SN  - 978-1-904670-19-3
SP  - 204
EP  - 209
PB  - Design Society
CY  - Glasgow
ER  - 
TY  - CHAP
A1  - Kumaran, P.
A1  - Gopinathan, M.
A1  - Razali, N. M.
A1  - Kuperjans, Isabel
A1  - Hariffin, B.
A1  - Hamdan, H.
T1  - Preliminary evaluation of atomization characteristics of improved biodiesel for gas turbine application
T2  - IOP Conference Series: Earth and Environmental Science (EES)
Y1  - 2013
U6  - http://dx.doi.org/10.1088/1755-1315/16/1/012014
SN  - 1755-1315
VL  - 16
IS  - 1
SP  - 012014/1
EP  - 012014/4
PB  - Institute of Physics Publishing (IOP)
CY  - London [u.a.]
ER  - 
TY  - CHAP
A1  - Rens, Gavin
A1  - Ferrein, Alexander
A1  - Poel, Etienne van der
T1  - Extending DTGolog to deal with POMD-Ps
T2  - Proceedings of the Nineteenth Annual Symposium of the Pattern Recognition Association of South Africa (PRASA 2008)
Y1  - 2008
SP  - 49
EP  - 54
ER  - 
TY  - CHAP
A1  - Augenstein, Eckardt
A1  - Kuperjans, Isabel
A1  - Lucas, K.
ED  - Tsatsaronis,, Georgios
T1  - EUSEBIA - Decision-Support-System for Technical, Economical and Ecological Design and Evaluation of Industrial Energy Systems
T2  - ECOS 2002 : proceedings of the 15th International Conference on Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy Systems, Berlin, Germany July 3 - 5, 2002. - Vol. 1
Y1  - 2002
SN  - 3-00-009533-0
SP  - 446
EP  - 453
PB  - Techn. Univ., Inst. for Energy Engineering
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Augenstein, Eckardt
A1  - Herbergs, S.
A1  - Kuperjans, Isabel
A1  - Lucas, K.
ED  - Kjelstrup, Signe
T1  - Simulation of industrial energy supply systems with integrated cost optimization
T2  - Proceedings of ECOS 2005, the 18th International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems : Trondheim, Norway, June 20 - 22, 2005. - Vol. 2
Y1  - 2005
SN  - 82-519-2041-8
N1  - CD-ROM-Ausg. u.d.T.: Shaping our future energy systems
SP  - 627
EP  - 634
PB  - Tapir Academic Press
CY  - Trondheim
ER  - 
TY  - CHAP
A1  - Pieper, Martin
A1  - Schulz, Silvia
T1  - Teaching Simulation Methods with COMSOL Multiphysics
N2  - This paper describes two courses on
simulation methods for graduate students:
“Simulation Methods” and “Simulation and
Optimization in Virtual Engineering” The
courses were planned to teach young engineers
how to work with simulation software as well as
to understand the necessary mathematical background.
As simulation software COMSOL is
used. The main philosophy was to combine
theory and praxis in a way that motivates the
students. In addition “soft skills” should be
improved. This was achieved by project work as
final examination. As underlying didactical principle
the ideas of Bloom’s revised taxonomy
were followed. The paper basically focusses on
educational aspects, e.g. how to structure the
course, plan the exercises, organize the project
work and include practical COMSOL examples.
KW  - COMSOL Multiphysics
KW  - Optimization module
KW  - LiveLink for MATLAB
KW  - Bloom Taxonomy
KW  - education
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Wetter, Martin
A1  - Kern, Alexander
T1  - Number of lightning strikes to tall structures - comparison of calculations and measurements using a modern lightning monitoring system
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
Y1  - 2014
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Schelthoff, Christof
A1  - Mathieu, Moritz
T1  - Calculation of interception efficiencies for mesh-type air-terminations according to IEC 62305-3 using a dynamic electro-geometrical model
T2  - International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna
Y1  - 2012
SN  - 978-1-4673-1896-9 (E-Book) ; 978-1-4673-1898-3 (Print)
SP  - 1
EP  - 6
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Lo Piparo, G. B.
A1  - Kern, Alexander
A1  - Mazzetti, C.
T1  - Some masterpoints about risk due to lightning
T2  - International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna
Y1  - 2012
SN  - 978-1-4673-1896-9 (E-Book) ; 978-1-4673-1898-3 (Print)
SP  - 1
EP  - 6
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Rousseau, Alain
A1  - Kern, Alexander
T1  - How to deal with environmental risk in IEC 62305-2
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
N2  - The 2nd edition of the lightning risk management
standard (IEC 62305-2) considers structures, which may
endanger environment. In these cases, the loss is not limited to
the structure itself, which is valid for usual structures. In the past
(Edition 1) this danger was simply taken into account by a special
hazard factor, multiplying the existing risk for the structure with
a number. Now, in the edition 2, we add to the risk for the
structure itself a “second risk” due to the losses outside the
structure. The losses outside can be treated independently from
what occurs inside. This is a major advantage to analyze the risk
for sensitive structures, like chemical plants, nuclear plants, or
structures containing explosives, etc. In this paper, the existing
procedure given by the European version EN 62305-2 Ed.2 is
further developed and applied to a few structures.
Y1  - 2014
SP  - 521
EP  - 527
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Braun, Christian
T1  - Risk management according to IEC 62305-2 edition 2: 2010–12 assessment of structures with a risk of explosion
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
N2  - Risk management for structures with a risk of explosion should be considered very carefully when performing a risk analysis according to IEC 62305-2. In contrast to the 2006 edition of the standard, the 2010 edition describes the topic “Structures with a risk of explosion” in more detail. Moreover, in Germany separate procedures and parameters are defined for the risk analysis of structures with a risk of explosion (Supplement 3 of the German DIN EN 62305-2 standard). This paper describes the contents and the relevant calculations of this Supplement 3, together with a numerical example.
Y1  - 2014
SP  - 1237
EP  - 1242
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Krichel, Frank
A1  - Müller, Klaus-Peter
T1  - Lightning protection design of a renewable energy hybrid-system without power mains connection
N2  - In the year 2000 a direct lightning strike to the hybridsystem without power mains connection VATALI on the Greek island Crete results in the destruction and damage of some mechanical and electrical components. The hybrid-system VATALI was not lightning protected at that time. The hardware damage costs are approx. 60,000 €. The exposed site of the hybrid-system on top of a mountain was and still is the reason for a high risk of lightning strikes. Also in the future further lightning strikes have to be taken into consideration. In the paper a fundamental lightning protection design concept for renewable energy hybrid-systems without power mains connection and protection measures against direct strikes and overvoltages are shown in detail. The design concept was realized exemplarily for the hybrid-system VATALI. The hardware costs for the protection measures were about 15,000 €. About 50% of the costs are due to protection measures against direct strikes, 50% are due to overvoltage protection. Future extensions, new installations, or modifications have to be included into the lightning protection design concept of the hybrid-system.
KW  - Blitzschutz
KW  - Erneuerbare Energien
KW  - Hybridsystem
KW  - Lightning protection
KW  - Renewable energy
KW  - hybrid-system
Y1  - 2001
ER  - 
TY  - CHAP
A1  - Zischank, Wolfgang J.
A1  - Kern, Alexander
A1  - Frentzel, Ralf
A1  - Heidler, Fridolin
A1  - Seevers, M.
T1  - Assessment of the lightning transient coupling to control cables interconnecting structures in large industrial facilities and power plants
N2  - Large industrial facilities and power plants often require a huge number fo information and control cables between the differnet structures. These I&C-cables can be routed in reinforced concrete cable ducts or in isolated buried cable runs. KTA 2206 is the German lightning protection standard for nuclear power plants. During the last several years considerable effort has been made to revise this standard. Despite the well established principles and design guidelines for the construction of the lightning protection system, this standard puts special emphasis on the coupling of transient overvoltages to I&C-cables.
KW  - Blitzschutz
KW  - Elektromagnetische Kopplung
KW  - Überspannung
KW  - Kraftwerke
KW  - Industrieanlagen
KW  - Lightning
KW  - current distribution
KW  - electromagnetic coupling
KW  - overvoltages
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Surtees, A. J.
A1  - Gillespie, A.
A1  - Kern, Alexander
A1  - Rousseau, A.
T1  - DEVELOPMENT OF A RISK ASSESSMENT CALCULATOR BASED ON A SIMPLIFIED FORM OF THE IEC 62305-2 STANDARD ON LIGHTNING PROTECTION
N2  - Neue Blitzschutznorm IEC 62305. Entwicklung einer einfachen Software zur Risikoabwägung
N2  - IEC Technical Committee 81 is currently creating the new IEC 62305 series of standards on Lightning Protection. Working Group 9 is responsible for Part 2 of this series, which deals with the assessment and management of risk its CDV (Committee Draft for Voting) stage and has been circulated to National Committees for comment. The paper details the development of the Simplified IEC Risk Assessment Calculator software tool as described in Informative Annex J of IEC62305-2 Ed.1/CDV 2. This tool is intended as a simplified implementation of the more rigorous treatment of risk management found in the written document. It is designed to be relatively intuitive for users who wish to obtain an initial assessment of risk sensitivity, but should not be considered a substitute to a full understanding of the methods provided in the standard when dealing with more complicated structures or those where greater risks to personal or system operation are involved.
KW  - Risiko
KW  - Risikoabwägung
KW  - Blitzrisiko
KW  - Blitzschutz
KW  - Risk
KW  - Risk Management
KW  - Risk Assessment
KW  - Lightning Risk
KW  - Lightning Protection
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Heidler, Fridolin
A1  - Seevers, M.
A1  - Zischank, Wolfgang J.
T1  - Magnetic Fields and Induced Voltages in case of a Direct Strike - Comparison of Results obtained from Measurements at a Scaled Building to those of IEC 62305-4
N2  - In the paper the results obtained from experiments at a modelled reinforced building in case of a direct lightning strike are compared with calculations. The comparison includes peak values of the magnetic field Hmax, its derivative (dH/dt)max and of induced voltages umax in typical cable routings. The experiments are performed at a 1:6 scaled building and the results are extrapolated using the similarity relations theory. The calculations are based on the approximate formulae given in IEC 62305-4 and have to be supplemented by a rough estimation of the additional shielding effect of a second reinforcement layer. The comparison shows, that the measured peak values of the magnetic field and its derivative are mostly lower than the calculated. The induced voltages are in good agreement. Hence, calculations of the induced voltages based on IEC 62305-4 are a good method for lightning protection studies of buildings, where the reinforcement is used as a grid-like electromagnetic shield.
N2  - Auswirkungen eines direkten Blitzeinschlages auf ein Gebäude, Vergleich von experimentellen Ergebnissen und Berechnungen basierend auf einer Formel aus der IEC 62305-4
KW  - Blitz
KW  - Direkter Blitzschlag
KW  - Elektromagnetischer Schutzschild
KW  - Magnetische Felder
KW  - Induzierte Spannungen
KW  - Kalkulation
KW  - Direct lightning strike
KW  - electromagnetic shield
KW  - magnetic fields
KW  - induced voltages
KW  - calculations
Y1  - 2004
SN  - 0304-3886
N1  - Journal of electrostatics: Beitr. auf S. 379 - 385. doi:10.1016/j.elstat.2006.09.004
ER  - 
TY  - CHAP
A1  - Zischank, Wolfgang J.
A1  - Heidler, Fridolin
A1  - Wiesinger, J.
A1  - Stimper, K.
A1  - Kern, Alexander
A1  - Seevers, M.
T1  - Magnetic Fields and Induced Voltages inside LPZ 1 Measured at a 1:6 Scale Model Building
N2  - Laborexperimente zu Blitzschutzzonen in Stahlbetongebäuden anhand eines Modells im Maßstab 1:6
N2  - For the application of the concept of Lightning Protection Zones (LPZ), the knowledge of the magnetic fields and induced voltages inside a structure is necessary. Laboratory experiments have been conducted at a downscaled model of a building (scale factor 1:6) to determine these electromagnetic quantities in case of a direct strike to the structure. The model (3 m x 2 m x 2 m) represented a small industrial building using the reinforcement of the concrete as electromagnetic shield. The magnetic fields and magnetic field derivatives were measured at several location inside the scaled model. Further, the voltages induced on three typical cable routes inside the model was determined. The influence of the lightning current waveshape, point-of-strike, bonding of the cable routes, and bridging of an expansion joint in the middle of the building on these quantities was studied.
KW  - Blitzschlag
KW  - Elektromagnetischer Schutzschild
KW  - Stahlbeton
KW  - Maßstabsgetreues Modell
KW  - Lightning
KW  - electromagnetic shielding
KW  - reinforced concrete
KW  - scaled model
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Darveniza, M.
A1  - Flisowski, Z.
A1  - Kern, Alexander
A1  - Landers, E.-U.
A1  - LoPiparo, G.
A1  - Mazzetti, C.
A1  - Rousseau, A.
A1  - Sherlock, J.
T1  - Application problems of the probabilistic approach to the assessment of risk for structures and services
N2  - The paper deals with the development of the probabilistic approach to the assessment of risk due to lightning. Sources of damage, types of damage and types of loss are defined and, accordingly, the procedure for risk analysis and the way of assessment of different risk components is proposed. The way to evaluate the influence of different protection measures (lightning protection system; shielding of structure, cables and equipment; routing of internal wiring; surge protective device) in reducing such probabilities is considered. The paper has been prepared within the framework of the activity of IEC TC81-WG9/CLC TC81-WG4 directed to prepare the draft IEC 62305-2 Risk Management, in cooperation with the Secretary of IEC/CLC TC81.
KW  - Blitzschutz
KW  - Risikoabwägung
KW  - Lightning protection system
KW  - risk assessment
KW  - protection measures
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Krichel, Frank
T1  - Considerations about the lightning protection system of mains independent renewable energy hybrid-systems - practical experiences
N2  - In the paper a lightning protection design concept for renewable energy hybrid-systems without power mains connection is described. Based on a risk analysis protection measures against direct strikes and overvoltages are shown in an overview. The design concept is realized exemplarily for the hybrid-system VATALI on the Greek island Crete. VATALI, not lightning protected at that time, was a victim of a lightning strike in the year 2000 causing destructions and damages of some mechanical and electrical components with costs of approx. 60.000 €. The hardware costs for the protection measures were about 15.000 €: about 50% of the costs are due to protection measures against direct strikes, 50% are due to overvoltage protection.
KW  - Blitzschutz
KW  - Erneuerbare Energien
KW  - Hybridsystem
KW  - Photovoltaikanlage
KW  - Windenergieanlage
KW  - Lightning protection
KW  - renewable energy
KW  - hybrid system
KW  - photovoltaic system
KW  - wind turbine
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Zischank, Wolfgang J.
A1  - Heidler, Fridolin
A1  - Kern, Alexander
A1  - Metwally, I. A.
A1  - Wiesinger, J.
A1  - Seevers, M.
T1  - Laboratory simulation of direct lightning strokes to a modelled building - measurement of magnetic fields and induced voltages
N2  - In IEC 61312-2 equations for the assessment of the magnetic fields inside structures due to a direct lightning strike are given. These equations are based on computer simulations for shields consisting of a single-layer steel grid of a given mesh width. Real constructions, however, contain at least two layers of reinforcement steel grids. The objective of this study was to experimentally determine the additional shielding effectiveness of a second reinforcement layer compared to a single-layer grid. To this end, simulated structures were set up in the high current laboratory. The structures consisted of cubic cages of 2 m side length with one or with two reinforcement grids, respectively. The structures were exposed to direct lightning currents representing the variety of anticipated lightning current waveforms. The magnetic fields and their derivatives at several positions inside the structure as well as the voltage between “floor” and “roof” in the center were determined for different current injection points. From these data the improvement of the shielding caused by a second reinforcement layer is derived.
KW  - Direkter Blitzschlag
KW  - Elektromagnetischer Schutzschild
KW  - Magnetische Felder
KW  - Induzierte Spannungen
KW  - Stahlbetonkonstruktion
KW  - Lightning
KW  - electromagnetic shielding
KW  - magnetic field
KW  - reinforced concrete
KW  - induced voltage
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Dielmann, Klaus-Peter
A1  - Peters, Bernhard
T1  - Micro Turbine Using Different Gases and Liquid Fuels
N2  - Micro turbine using different gases and liquid fuels
KW  - Gasturbine
KW  - Mikrogasturbine
KW  - Micro turbine
Y1  - 2002
ER  - 
TY  - CHAP
A1  - Brüssermann, Klaus
T1  - Platform of Excellence in "Energy and Environment"
N2  - The Ministry of Science and Research in North Rhine-Westphalia created eight platforms of excellence, one in the research area „Energy and Environment“ in 2002 at ACUAS. This platform concentrates the research and development of 13 professors in Jülich and Aachen and of two scientific institutes with different topics: – NOWUM-Energy with emphasis on efficient and economic energy conversion – The Solar Institute Jülich – SIJ – being the largest research institute in the field of renewables at a University of Applied Sciences in Germany With this platform each possible energy conversion – nuclear, fossil, renewable- can be dealt with to help solving the two most important problems of mankind, energy and potable water. At the CSE are presented the historical development, some research results and the combined master studies in „Energy Systems“ and „Nuclear Applications“
KW  - Energietechnik
KW  - Kernenergie
KW  - Umwelt
KW  - Energy
KW  - environment
KW  - Energy Systems
KW  - Nuclear Applications
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Brüssermann, Klaus
A1  - Deuster, M.
T1  - Temperature measurement to optimise the burning process
N2  - One of the most important parameters in a burning chamber - in power stations, in waste to energy plants - is the temperature. This temperature is in the range of 700-1500 °C - one of the most advanced measuring methods being the acoustic pyrometry with the possibility of producing temperature mapping in one level of the burning chamber - comparable to computer tomography. The results of these measurements discussed in the presentation can be used - to fulfil the legal requirements in the FRG or in the EU - to equalise the temperature in one level of the burning chamber to optimise the steam production (better efficiency of the plant) and to minimise the production of temperature controlled flue gas components (NO, CO a. o.) - to control the SNCR-process if used.
KW  - Pyrometrie
KW  - Temperaturmessung
KW  - temperature measurement
KW  - acoustic pyrometry
KW  - steam production
KW  - flue gas components
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Ziegler, M.
A1  - Schüller, R.
A1  - Mottaghy, Darius
T1  - Numerical simulation of energy consumption of artificial ground freezing applications subject to water seepage
T1  - Simulation numérique de la consummation d´énergie des applications pour la congélation artificielle du sol soumise au flux de l´eau souterraine
T2  - Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris 2013
Y1  - 2013
SP  - 2985
EP  - 2988
ER  - 
TY  - CHAP
A1  - Sirazitdinova, Y.
A1  - Dulzon, A.
A1  - Müller, Burghard
T1  - Project management practices in engineering university
T2  - 21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015; National Research Tomsk Polytechnic UniversityTomsk; Russian Federation; 5 October 2015 through 9 October 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1088/1757-899X/93/1/012080
N1  - IOP Conference Series: Materials Science and Engineering
Vol. 93, Issue 1
ER  - 
TY  - CHAP
A1  - Tewari, Udit
A1  - Neshvad, Surena
A1  - Goldbach, Daniel
A1  - Sachau, Jürgen
T1  - Verification and Implementation of Pseudo-Random-Binary-Sequences for Online Determination of Grid Impedance Spectrum
T2  - International Conference on Renewable Energies and Power Quality (ICREPQ´15), La Conuna, Spain, 25th to 27th March, 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Latzke, Markus
A1  - Alexopoulos, Spiros
A1  - Kronhardt, Valentina
A1  - Rendón, Carlos
A1  - Sattler, Johannes, Christoph
T1  - Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver
T2  - Energy Procedia
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.egypro.2015.03.142
SN  - 1876-6102
N1  - International Conference on Concentrating Solar Power and Chemical Energy Systems, SolarPACES 2014, Beijing, China
SP  - 1327
EP  - 1334
ER  - 
TY  - CHAP
A1  - Rochefort, E. de
A1  - Verver, M.
A1  - Grunendahl, A.
A1  - Mooi, H.
A1  - Butenweg, Christoph
T1  - Detailed modelling of the lumbar spine for investigation of low back pain
T2  - Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)
Y1  - 2005
U6  - http://dx.doi.org/10.4271/2005-01-2716
SN  - 0096-736X
SP  - 1
EP  - 11
PB  - SAE International
CY  - Warrendale, Pa.
ER  - 
TY  - CHAP
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Pfeiffer, Frank
T1  - Textile reinforced concrete. Part I: Process model for collaborative research and development
T2  - Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universität Weimar. Ed.: K. Gürlebeck; L. Hempel; C. Könke
Y1  - 2003
SP  - 1
EP  - 8
PB  - IKM
CY  - Weimar
ER  - 
TY  - CHAP
A1  - Konrad, M.
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Bruckermann, O.
T1  - Textile reinforced concrete. Part II: Multi-level modeling concept
T2  - Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universität Weimar. Ed.: K. Gürlebeck; L. Hempel; C. Könke
Y1  - 2003
SP  - 1
EP  - 11
PB  - IKM
CY  - Weimar
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Mistler, Michael
A1  - Kuhlmann, Wolfram
T1  - Seismic behaviour of historic masonry buildings
T2  - 7th National Congress on Mechanics : Chania, Crete, June 24 - 26, 2004 ; proceedings / ed. A. Kounadis ....
Y1  - 2004
SP  - 47
EP  - 49
PB  - Hellenic Society for Theoretical and Applied Mechanics
CY  - Chania
ER  - 
TY  - CHAP
A1  - Kuhlmann, Wolfram
A1  - Butenweg, Christoph
A1  - Lopez, Marijen
A1  - Fernandez, Sebastian
T1  - Seismic vulnerability assessment of the historic Aachen Cathedral
T2  - Conference proceedings / 13th World Conference on Earthquake Engineering [Vancouver, British Columbia, Canada, August 1 - 6, 2004] / [hosted by CAEE/ACGP, Canadian Association for Earthquake Engineering]
Y1  - 2004
SP  - 1
EP  - 14
PB  - CAEE
CY  - Vancouver
ER  - 
TY  - CHAP
A1  - Dalguer, Luis A.
A1  - Renault, Philippe
A1  - Churilov, Sergey
A1  - Butenweg, Christoph
T1  - Evaluation of fragility curves for a three-storey-reinforced-concrete mock-up of SMART 2013 project
T2  - Transactions, SMiRT-23 : 23rd Conference on Structural Mechanics in Reactor Technology : Manchester, United Kingdom - August 10-14, 2015
Y1  - 2016
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - El-Deib, Khaled
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
A1  - Könke, Carsten
A1  - Bettzieche, Volker
T1  - Safety assessment of rockfill and masonry dams
T2  - Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ... Vol. 1
Y1  - 2002
SN  - 90-5809-510-X
SP  - 237
EP  - 242
PB  - Balkema
CY  - Lisse
ER  - 
TY  - CHAP
A1  - Holler, S.
A1  - Butenweg, Christoph
A1  - Noh, S.-Y.
A1  - Meskouris, Konstantin
T1  - Numerical simulation of textile-reinforced concrete structures
T2  - Proceedings of the Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002] / ed. by B. H. V. Topping and Z. Bittnar. (Civil-Comp Press books on computational engineering)
Y1  - 2002
SN  - 0-948749-83-0
SP  - 287
EP  - 288
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Kob, Malte
A1  - Niendorf, Thoralf
A1  - Butenweg, Christoph
T1  - An approach for numerical calculation of glottal flow during glottal closure
T2  - Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone
Y1  - 2009
SN  - 978-3-9808659-6-8
SP  - 1722
EP  - 1725
PB  - DEGA
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Niendorf, Thoralf
A1  - Frauenrath, Tobias
A1  - Otten, Mario
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - 3D vocal fold geometry mapping using Magnetic Resonance Imaging
T2  - Fortschritte der Akustik : 36. Deutsche Jahrestagung für Akustik ; 15.-18. März 2010, [Berlin ; DAGA 2010] / DEGA ... Wiss. Ed. Michael Möser ... Band 1
Y1  - 2010
SN  - 978-3-9808659-8-2
SP  - 271
EP  - 272
PB  - Deutsche Gesellschaft für Akustik
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Frauenrath, Tobias
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Otten, Mario
A1  - Niendorf, Thoralf
T1  - 3D mapping of vocal fold geometry during articulatory maneuvers using ultrashort echo time imaging at 3.0 T
T2  - ISMRM-ESMRMB joint annual meeting 2010 : Stockholm, Sweden, 1 - 7 May 2010. Band 4
Y1  - 2010
SN  - 978-1-617-82008-3
SP  - 3087
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Park, Jin
A1  - Butenweg, Christoph
T1  - Seismic safety verification of masonry structures
T2  - Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universität Dresden]. Ed. by: Wolfram Jäger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)
Y1  - 2010
SN  - 978-3-00-031381-3
SP  - 813
EP  - 822
PB  - ARGE 8IMC Dresden
CY  - Radebeul
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Seismic design of masonry walls subject to out-of-plane bending
T2  - Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...
Y1  - 2010
SN  - 978-1-905088-36-2
U6  - http://dx.doi.org/10.4203/ccp.93.348
SP  - Paper 348
PB  - Civil-Comp Press
CY  - Kippen
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - Towards a complete finite-element model of human phonation: modeling phonatory maneuvers
T2  - 12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...
Y1  - 2005
SN  - 978-3-9806183-8-0
PB  - Univ., Dep. of Orthodontics
CY  - Ulm
ER  - 
TY  - CHAP
A1  - Kob, Malte
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Niendorf, Thoralf
T1  - Training of a combined model of larynx and vocal folds with data from MRI measurements
T2  - The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings
Y1  - 2006
SP  - 45
EP  - 46
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic resistance of unreinforced masonry buildings
T2  - Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...
Y1  - 2006
SN  - 1-905088-06-X
U6  - http://dx.doi.org/10.4203/ccp.83.9
SP  - Paper 9
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Holler, Stefan
A1  - Butenweg, Christoph
A1  - Meiners, Daniel
T1  - A multiphase model with hypoplastic formulation of the solid phase and its application to earthquake engineering problems
T2  - Computational structural dynamics and earthquake engineering / ed. by Manolis Papadrakakis .... (Structures and infrastructures series ; 2)
Y1  - 2009
SN  - 978-0-415-45261-8
U6  - http://dx.doi.org/10.1201/9780203881637.ch19
SP  - 293
EP  - 308
PB  - CRC Press
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Reindl, Lukas
T1  - Capacity design of masonry buildings under cyclic loading
T2  - Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Liège on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...
Y1  - 2008
SN  - 978-2-87456-063-7
SP  - 201
EP  - 208
PB  - Editions de l'Université de Liège
CY  - Liège
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - Displacement based design of masonry structures
T2  - Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...
Y1  - 2008
SN  - 978-19-2070-1-92-5
SP  - 1
EP  - 10
PB  - University of Newcastle
CY  - Callaghan
ER  - 
TY  - CHAP
A1  - Kob, Malte
A1  - Butenweg, Christoph
T1  - A finite element model of the interaction between intra-and extralaryngeal muscles
T2  - International Conference on Voice Physiology and Biomechanics, August 18-20, 2004, Marseille, France
Y1  - 2004
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Kalker, Ines
A1  - Toll, B.
A1  - Holler, Stefan
A1  - Butenweg, Christoph
A1  - Topping, B. H. V.
A1  - Mota Soares, C. A.
T1  - Capacity analysis of textile retrofitted unreinforced masonry
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...
Y1  - 2004
SN  - 0-948749-95-4
U6  - http://dx.doi.org/10.4203/ccp.79.194
SP  - 431
EP  - 432
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Karimi, Iman
A1  - Butenweg, Christoph
A1  - Toll, Britta
T1  - Vulnerability assessment of industrial facilities
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.34
SP  - 34, 73
EP  - 75
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Mistler, Michael
A1  - Butenweg, Christoph
T1  - A seismic design procedure for masonry buildings
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.193
SP  - 465
EP  - 467
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic vulnerability assessment system for bridges
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
SP  - 1
EP  - 14
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Grunendahl, A.
A1  - de Rochefort, E.
A1  - Butenweg, Christoph
T1  - Numerical models for investigating the causes of low back pain due to whole-body vibrations
T2  - 2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2.
Y1  - 2005
SN  - 978-972-8469-37-3
SP  - 905
EP  - 914
PB  - IST Press
CY  - Lisbon
ER  - 
TY  - CHAP
A1  - Kalker, Ines
A1  - Neumann, M.
A1  - Butenweg, Christoph
A1  - Holler, Stefan
T1  - Modelling of textile strengthened masonry
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.184
SP  - 447
EP  - 448
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Krämer, Sebastian
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - A combined FE and multiple-mass model for numerical simulation of phonatory maneuvers
T2  - Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: Fülöp Augusztinovicz ...
Y1  - 2005
SN  - 978-963-8241-68-9
SP  - 2759
EP  - 2764
PB  - OPAKFI Tud. Egyesület
CY  - Budapest
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Thierauf, Georg
T1  - Optimum cost design of reinforced concrete structures using parallel computing
T2  - Advances in computational mechanics with parallel and distributed processing : research papers presented at The First Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held at Lochinver, Scotland, between 26 April and 1 May 1997 / ed. by B. H. V. Topping
Y1  - 1997
SN  - 0-948749-47-4
SP  - 197
EP  - 202
PB  - Saxe-Coburg Publication
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Thierauf, Georg
T1  - Optimum design of reinforced concrete structures
T2  - Advances in computational structural mechanics : this volume contains a selection of papers presented at The First International Conference on Engineering Computational Technology and The Fourth International Conference on Computational Structures Technology, held in Edinburgh from 18-21 August 1998 / edited by B. H. V. Topping
Y1  - 1998
SN  - 0-948749-57-1
SP  - 447
EP  - 458
PB  - Civil-Comp Press
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Kuhlmann, Wolfram
T1  - Technical information system for collaborative material research
T2  - Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002]
Y1  - 2002
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Wagner, R.
A1  - Noh, S.-Y.
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Seismic excited granular material silos
T2  - Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ...
Y1  - 2002
SN  - 90-5809-511-8
SP  - 253
EP  - 258
PB  - Balkema
CY  - Lisse
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kuhlmann, Winfried
A1  - Lopez, M.
A1  - Fernandez, S.
T1  - Seismic vulnerability assessment of the Aachen Cathedral based on measurements and numerical simulations
T2  - International Conference on Earthquake Engineering to mark 40 years from Catastrophic 1963 Skopje Earthquake, Skopje 2003
Y1  - 2003
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
T1  - Seismic vulnerability assessment of bridges
T2  - First Munich Bridge Assessment Conference, MBAC 2005 : Munich, 20.-25. June 2005
Y1  - 2005
SP  - 1
EP  - 16
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Nonlinear behaviour of masonry under cyclic loading
T2  - 7th European Conference on Structural Dynamics, EURODYN 2008 : 7-9 July 2008, Southampton
Y1  - 2008
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Kubalski, Thomas
T1  - Seismic response of conventional and base-isolated liquid storage tanks
T2  - International Conference on Earthquake Engineering : 29.-31.05.2013, Skopje, Mazedonien
Y1  - 2013
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kleemann, Anne
A1  - Altay, Okyay
A1  - Renault, Philippe
T1  - Simulation of impact-loads on reinforced concrete structural elements
T2  - 22nd International Conference on Structural Mechanics in Reactor Technology 2013 : (SMiRT 22) ; San Francisco, California, USA, 18 - 23 August 2013
Y1  - 2013
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Stollenwerk, Dominik
A1  - Rieke, C.
A1  - Dahmen, Markus
A1  - Pieper, Martin
T1  - Biogas Production Modelling : A Control System Engineering Approach
T2  - IOP Conference Series: Earth and Environmental Science. Bd. 32
Y1  - 2016
U6  - http://dx.doi.org/10.1088/1755-1315/32/1/012008
SN  - 1755-1315
N1  - ICARET 2016, International Conference on Advances in Renewable Energy and Technologies, Putrajaya, MY, Feb 23-25, 2016
SP  - 012008/1
EP  - 012008/4
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sheshov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - New coupled finite-infinite element approach for wave propagation simulation of unbounded soil media
T2  - 2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 2
Y1  - 2014
SN  - 978-1-5108-1021-1
SP  - 1556
EP  - 1561
PB  - Curran Associates, Inc.
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
A1  - Taddei, Francesca
T1  - Vibration mitigation of wind turbine towers by tuned liquid column dampers
T2  - Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)
Y1  - 2014
SN  - 978-972-752-165-4
SP  - 1531
EP  - 1538
CY  - Porto
ER  - 
TY  - CHAP
A1  - Dalguer, Luis A.
A1  - Churilov, Sergey
A1  - Butenweg, Christoph
A1  - Renault, Philippe
A1  - Hyun, An Jun
T1  - Dynamic analysis of a reinforced concrete electrical nuclear building of SMART 2013 project subjected to earthquake excitation using ABAQUS
T2  - Workshop SMART2013 : Paris, France, November 25th - 27th, 2014
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Seismic Design of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed.
Y1  - 2014
SN  - 978-3-658-02810-7 (E-Book) ; 978-3-658-02809-1 (Print)
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_36
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sesov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - Boundary effects on seismic analysis of multi-storey frames considering soil structure interaction phenomenon
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed
Y1  - 2014
SN  - 978-3-658-02809-1 (Print) ; 978-3-658-02810-7
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_47
SP  - 569
EP  - 576
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
A1  - Andreini, M.
A1  - De Falco, A.
A1  - Sassu, M.
T1  - Numerical calibration of a macro-element for vaultes system in historic churches
T2  - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
A1  - Andreini, M.
A1  - De Falco, A.
A1  - Sassu, M.
T1  - Macro-elements identification in historic chapels: the case of St. Venerio Chapel in Reggiolo - Emilia Romagna
T2  - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)
Y1  - 2014
SN  - 978-972-752-165-4
SP  - 3145
EP  - 3152
CY  - Porto
ER  - 
TY  - CHAP
A1  - Park, Jin
A1  - El-Daib, Khaled
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - A novel macroelement approach for masonry walls
T2  - Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)
Y1  - 2011
SN  - 978-90-76019-31-4
SP  - 3281
EP  - 3286
PB  - K. U. Leuven, Dep. of Civil Engineering
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Butenweg, Christoph
A1  - Kubalski, Thomas
T1  - Numerical simulation of unreinforced masonry walls subject to dynamic out-of-plane loading
T2  - COMPDYN 2011 : ECCOMAS Thematic Conference ; Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering ; 25-28 May, 2011, Corfu, Greece / Eds.: M. Papadrakakis ...
Y1  - 2011
SN  - 978-960-99994-0-3
SP  - 1
EP  - 10
PB  - National Technical Univ. of Athens
CY  - Athen
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
A1  - Rosin, Julia
T1  - Seismic analysis of liquid storage tanks
T2  - Earthquake Geology and Archaeology: Science, Society and Critical facilities : proceedings ; 2nd INQUA-IGCP 567 International Workshop on Active Tectonics, Earthquake Geology, Archaeology and Engineering ; 19-24 September 2011, Corinth (Greece) / Eds.: C. Grützner ; R. Pérez-Lopez ; T. Fernández Steeger ; I. Papanikolaou ; K. Reicherter ; P. G. Silva ; A. Vött. Volume 2
Y1  - 2011
SN  - 978-960-466-093-3
SP  - 136
EP  - 139
PB  - The Natural hazards Laboratory, National and Kapodistrian University of Athens
CY  - Athens
ER  - 
TY  - CHAP
A1  - Taddei, Francesca
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Butenweg, Christoph
A1  - Karadogan, Faruk
T1  - Numerical investigation of AAC wall panels based on the damage plasticity constitutive law
T2  - Cement, Wapno, Beton ; 2011, 7, Special issue: 5th International Conference on Autoclaved Aerated Concrete 'Securing a sustainable future' to be held at Bydgoszcz to celebrate 60 years of AAC experience in Poland, Bydgoszcz, September 14-17, 2011
Y1  - 2011
SN  - 1425-8129
SP  - 86
EP  - 91
PB  - Stowarzyszenie Producentów Cementu i Wapna
CY  - Krakow
ER  - 
TY  - CHAP
A1  - Höfler, M.
A1  - Kneer, R.
A1  - Groß, Rolf Fritz
A1  - Kehrmann, K.
ED  - Vorobieff, P.
T1  - Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows
T2  - Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ;  Volume 89)
Y1  - 2015
SN  - 978-1-84564-946-3 (Print-Ausgabe)
SN  - 978-1-84564-947-0 (Online-Ausgabe)
SN  - 1746-4471
SP  - 89
EP  - 101
PB  - WIT Press
CY  - Southampton
ER  - 
TY  - CHAP
A1  - Birkl, Josef
A1  - Diendorfer, Gerhard
A1  - Kern, Alexander
A1  - Thern, Stephan
T1  - Extremely high lightning peak currents
T2  - 34th International Conference on Ligntning Protection, 02-07 September 2018
Y1  - 2018
SN  - 978-1-5386-6635-7
ER  - 
TY  - CHAP
A1  - Gorzalka, Philip
A1  - Dahlke, Dennis
A1  - Göttsche, Joachim
A1  - Israel, Martin
A1  - Patel, Dhruvkumar
A1  - Prahl, Christoph
A1  - Schmiedt, Jacob Estevam
A1  - Frommholz, Dirk
A1  - Hoffschmidt, Bernhard
A1  - Linkiewicz, Magdalena
T1  - Building Tomograph–From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input
T2  - EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Analysis of volumetric solar radiation absorbers made of wire meshes
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117521
SN  - 0094243X
VL  - 2126
SP  - 030009-1
EP  - 030009-6
ER  - 
TY  - CHAP
A1  - Mahdi, Zahra
A1  - Rendón, Carlos
A1  - Schwager, Christian
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Novel concept for indirect solar-heated methane reforming
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117694
SN  - 0094-243X
VL  - 2126
SP  - 180014-1
EP  - 180014-7
PB  - AIP Publishing
CY  - Melville, NY
ER  - 
TY  - CHAP
A1  - May, Martin
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - Latzke, Markus
A1  - Bäumer, Klaus
A1  - Uhlig, Ralf
A1  - Söhn, Matthias
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Experimental facility for investigations of wire mesh absorbers for pressurized gases
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117547
SN  - 0094243X
VL  - 2126
SP  - 030035-1
EP  - 030035-9
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Alexopoulos, Spiros
A1  - Caminos, Ricardo Alexander Chico
A1  - Mitchell, John C.
A1  - Ruiz, Victor C.
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis K.
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117663
SN  - 0094243X
VL  - 2126
SP  - 150007-1
EP  - 150007-8
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Leicht-Scholten, Carmen
ED  - Tipurić, Darko
ED  - Hruška, Domagoj
T1  - Diversity- and innovation management in complex engineering organizations
T2  - 7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia
N2  - Diversity is increasingly being addressed as an innovation-promoting factor. For this reason, companies and institutions tackle the integration of a diversity management approach that enables a heterogenic perspective on innovation development. However, system-theoretical frameworks state that the implementation of diversity measures that are not tailored to the needs of the organization often leads to a rejection or reactivity with regard to the management approach. In this context, especially organizations, which are characterized by a specific hierarchical structure, a dominant habitus or specialist culture, must face the challenge of realizing a sustainable change of the corporate culture that sets the basis for implementing diversity management approaches. The presented research project focuses on analyzing the situation in a huge scientific collaborative project - so called Cluster of Excellence (CoE) - with the aim to implement a diversity - and innovation management strategy. Considering the influencing determinants, the CoE is characterized by its embeddedness in the scientific system, a complex organizational structure, and a high fluctuation rate. The paper presents a systemic approach of reflecting these factors in order to develop a diversity- and innovation management strategy. In this frame, the results of a quantitative survey of CoE employees and derived mindset-types are presented. The results show a need for taking different mindset-types into account, to be able to develop a tailored management strategy. The aim of the project is to give recommendations for developing a sustainable management concept that promotes both diversity and innovation by drawing on the persisting mindsets of organization members while reflecting top down as well as bottom up factors of implementation processes as well as the psychology of change. This paper addresses all who are concerned with the management of human resources in innovation processes and are striving for a cultural change within the framework of complex organizations.
KW  - Change Management
KW  - Corporate Culture
KW  - Diversity Management
KW  - Engineering
KW  - Innovation Management
Y1  - 2019
SP  - 136
EP  - 157
PB  - Governance Research and Development Centre (CIRU)
CY  - Zagreb
ER  - 
TY  - CHAP
A1  - Philipp, Brauner
A1  - Brillowski, Florian Sascha
A1  - Dammers, Hannah
A1  - Königs, Peter
A1  - Kordtomeikel, Frauke Carole
A1  - Petruck, Henning
A1  - Schaar, Anne Kathrin
A1  - Schmitz, Seth
A1  - Steuer-Dankert, Linda
A1  - Mertens, Alexander
A1  - Gries, Thomas
A1  - Leicht-Scholten, Carmen
A1  - Nagel, Saskia K.
A1  - Nitsch, Verena
A1  - Schuh, Günther
A1  - Ziefle, Martina
ED  - Mrugalska, Beata
ED  - Trzcielinski, Stefan
ED  - Karwowski, Waldemar
ED  - Nicolantonio, Massimo Di
ED  - Roossi, Emilio
T1  - A research framework for human aspects in the internet of production: an intra-company perspective
T2  - Advances in Manufacturing, Production Management and Process Control:  Proceedings of the AHFE 2020 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 16–20, 2020, USA
N2  - Digitalization in the production sector aims at transferring concepts and methods from the Internet of Things (IoT) to the industry and is, as a result, currently reshaping the production area. Besides technological progress, changes in work processes and organization are relevant for a successful implementation of the “Internet of Production” (IoP). Focusing on the labor organization and organizational procedures emphasizes to consider intra-company factors such as (user) acceptance, ethical issues, and ergonomics in the context of IoP approaches. In the scope of this paper, a research approach is presented that considers these aspects from an intra-company perspective by conducting studies on the shop floor, control level and management level of companies in the production area. Focused on four central dimensions—governance, organization, capabilities, and interfaces—this contribution presents a research framework that is focused on a systematic integration and consideration of human aspects in the realization of the IoP.
KW  - Human factors
KW  - Digitalization
KW  - Acceptance
KW  - Ethics
KW  - Human-robot collaboration
Y1  - 2020
SN  - 978-3-030-51980-3
U6  - http://dx.doi.org/10.1007/978-3-030-51981-0_1
SP  - 3
EP  - 17
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Mertens, Alexander
A1  - Pütz, Sebastian
A1  - Brauner, Philipp
A1  - Brillowski, Florian Sascha
A1  - Buczak, Nadine
A1  - Dammers, Hannah
A1  - van Dyck, Marc
A1  - Kong, Iris
A1  - Königs, Peter
A1  - Kortomeikel, Frauke Carole
A1  - Rodemann, Niklas
A1  - Schaar, Anne Kathrin
A1  - Steuer-Dankert, Linda
A1  - Wlecke, Shari
A1  - Gries, Thomas
A1  - Leicht-Scholten, Carmen
A1  - Nagel, Saskia K.
A1  - Piller, Frank Thomas
A1  - Schuh, Günther
A1  - Ziefle, Martina
A1  - Nitsch, Verena
T1  - Human digital shadow: Data-based modeling of users and usage in the internet of production
T2  - 14th International Conference on Human System Interaction : 8-10 July 2021. Gdańsk, Poland
N2  - Digital Shadows as the aggregation, linkage and abstraction of data relating to physical objects are a central vision for the future of production. However, the majority of current research takes a technocentric approach, in which the human actors in production play a minor role. Here, the authors present an alternative anthropocentric perspective that highlights the potential and main challenges of extending the concept of Digital Shadows to humans. Following future research methodology, three prospections that illustrate use cases for Human Digital Shadows across organizational and hierarchical levels are developed: human-robot collaboration for manual work, decision support and work organization, as well as human resource management. Potentials and challenges are identified using separate SWOT analyses for the three prospections and common themes are emphasized in a concluding discussion.
KW  - digital shadow
KW  - cyber physical production system
KW  - user & usage
KW  - internet of production
Y1  - 2021
U6  - http://dx.doi.org/10.1109/HSI52170.2021.9538729
SP  - 1
EP  - 8
PB  - IEEE
ER  -