TY  - JOUR
A1  - Staat, Manfred
A1  - Vu, Duc Khoi
T1  - Limit analysis of flaws in pressurized pipes and cylindrical vessels Part II: Circumferential defects
JF  - Engineering Fracture Mechanics ; 97(2013), H. 1
N2  - Upper and lower bound theorems of limit analyses have been presented in part I of the paper. Part II starts with the finite element discretization of these theorems and demonstrates how both can be combined in a primal–dual optimization problem. This recently proposed numerical method is used to guide the development of a new class of closed-form limit loads for circumferential defects, which show that only large defects contribute to plastic collapse with a rapid loss of strength with increasing crack sizes. The formulae are compared with primal–dual FEM limit analyses and with burst tests. Even closer predictions are obtained with iterative limit load solutions for the von Mises yield function and for the Tresca yield function. Pressure loading of the faces of interior cracks in thick pipes reduces the collapse load of circumferential defects more than for axial flaws. Axial defects have been treated in part I of the paper.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.engfracmech.2012.05.017
SN  - 0013-7944
VL  - 97
SP  - 314
EP  - 333
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Trenz, Eva
A1  - Lohmann, Philipp
A1  - Frotscher, Ralf
A1  - Klinge, Uwe
A1  - Tabaza, Ruth
A1  - Kirschner-Hermanns, Ruth
T1  - New measurements to compare soft tissue anchoring systems in pelvic floor surgery
JF  - Journal of Biomedical Materials Research Part B: Applied Biomaterials
N2  - Suburethral slings as well as different meshes are widely used treating stress urinary incontinence and prolaps in women. With the development of MiniSlings and special meshes using less alloplastic material anchorage systems become more important to keep devices in place and to put some tension especially on the MiniSlings. To date, there are many different systems of MiniSlings of different companies on the market which differ in the structure of the used meshes and anchors. A new objective measurement method to compare different properties of MiniSling systems (mesh and anchor) is presented in this article. Ballistic gelatine acts as soft tissue surrogate. Significant differences in parameters like pull-out strength of anchors or shrinkage of meshes under loading conditions have been determined. The form and size of the anchors as well as the structural stability of the meshes are decisive for a proper integration. The tested anchorings sytems showed markedly different mechanical function at their respective load bearing capacity. As the stable fixation of the device in tissue is a prerequisite for a permanet reinforcement, the proposed test system permits further optimisation of anchor and mesh devices to improve the success of the surgical treatment
Y1  - 2012
U6  - http://dx.doi.org/10.1002/jbm.b.32654
SN  - 1552-4981
VL  - 100B
IS  - 4
SP  - 924
EP  - 933
PB  - Wiley
CY  - Hoboken, NJ
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Tran, Thanh Ngoc
A1  - Kreißig, R.
T1  - Load bearing capacity of thin shell structures made of elastoplastic material by direct methods
JF  - Technische Mechanik. 28 (2008), H. 3-4
Y1  - 2008
SP  - 299
EP  - 309
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Sponagel, Stefan
A1  - Nguyen, Nhu Huynh
T1  - Experiment and material model for soft tissue materials
JF  - Constitutive  models for rubber VI : proceedings of the sixth European Conference on Constitutive Models for Rubber, Dresden, Germany, 7 - 10 September 2009 / eds. Gert Heinrich ...
Y1  - 2010
SN  - 978-0-415-56327-7
SP  - 465
EP  - 470
PB  - CRC Press
CY  - Boca Raton [u.a.]
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Schwartz, M.
A1  - Lang, H.
A1  - Wirtz, K.
A1  - Heitzer, M.
T1  - Design by Analysis of Pressure Components by non-linear Optimization
JF  - The 10th International Conference on Pressure Vessel Technology, July 7-10, 2003, Vienna, Austria, Proceedings ICPVT-10 / Zeman, J. L. [ed]
Y1  - 2003
SN  - 3950152814
SP  - 59
EP  - 65
PB  - ÖGS, Österreichische Gesellschaft für Schweißtechnik
CY  - Wien
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Kühn, R.
A1  - Hauger, W.
A1  - Sponagel, Stefan
T1  - An Interpretation of Wolff’s Law
JF  - Biomedizinische Technik. 49 (2004)
Y1  - 2004
SN  - 0932-4666
N1  - Ergänzungsband 2, Teil 2
SP  - 1020
EP  - 1021
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
A1  - Reiners, H.
A1  - Schubert, F.
T1  - Shakedown and ratchetting under tension–torsion loadings: analysis and experiments
JF  - Nuclear Engineering and Design. 225 (2003), H. 1
Y1  - 2003
SN  - 0029-5493
SP  - 11
EP  - 26
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
A1  - Lang, H.
A1  - Wirtz, K.
T1  - Direct Finite Element Route for Design-by-Analysis of Pressure Components
JF  - International Journal of Pressure Vessels and Piping. 82 (2005), H. 1
Y1  - 2005
SN  - 0308-0161
SP  - 61
EP  - 67
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
A1  - Hicken, E.F.
T1  - LISA, ein europäisches Projekt zur direkten Berechnung der Tragfähigkeit duktiler Strukturen.
Y1  - 1998
N1  - PERMAS–Benutzertagung, 8.–9.10.1998, Stuttgart (1998)
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Limit and Shakedown Analysis for Plastic Safety of Complex Structures
JF  - Transactions of the 14th International Conference on Structural Dynamics in Reactor Technology (SMiRT-14) / Livolant, M. [ed]
Y1  - 1997
N1  - Vol. B, Paper B02/2
SP  - 33
EP  - 40
CY  - Lyon
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Limit and Shakedown Analysis Using a General Purpose Finite Element Code
JF  - Proceedings of NAFEMS World Congress '97 on Design, Simulation & Optimisation : reliability & applicability of computational methods ; Stuttgart, Germany, 9 - 11 April 1997
Y1  - 1997
SN  - 1-87437-620-4
SP  - 522
EP  - 533
PB  - NAFEMS
CY  - Glasgow
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Traglastanalyse - ein strukturmechanisches Verfahren zur Beurteilung von gerissenen Bauteilen und Verbindungen
JF  - Festigkeits- und Bruchverhalten von Fügeverbindungen : 32. Tagung des DVM-Arbeitskreises Bruchvorgänge ; 22. und 23. Februar 2000 in Berlin / Richard, H. A. [Hrsg]
Y1  - 2000
N1  - DVM-Bericht 232
SP  - 183
EP  - 192
PB  - Deutscher Verband für Materialforschung und -prüfung
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Reliability Analysis of Elasto-Plastic Structures under Variable Loads
JF  - Inelastic analysis of structures under variable loads : theory and engineering applications / Maier, G.; Weichert, D. [ed]
Y1  - 2000
SN  - 0-7923-6645-X
SP  - 269
EP  - 288
PB  - Kluwer Academic Publ.
CY  - Dordrecht
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Direct FEM approach to design-by-analysis of pressurized components
JF  - Achema 2000 : Sonderausgabe / Linde.  [Hrsg.: Linde AG. Red.: Volker R. Leski]
Y1  - 2000
SP  - 79
EP  - 81
PB  - Linde AG
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Structural Reliability Analysis of Elasto-Plastic Structures
JF  - Safety and reliability : proceedings of ESREL '99, the Tenth European Conference on Safety and Reliability, Munich-Garching, Germany, 13 - 17 September 1999 / Schuëller, G. I.; Kafka, P. [eds]
Y1  - 1999
SN  - 90-5809-109-0
SP  - 513
EP  - 518
PB  - Balkema
CY  - Rotterdam
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Limit and Shakedown Analysis with Uncertain Data
JF  - Stochastic optimization techniques : numerical methods and technical applications / Marti, K. [ed]
Y1  - 2002
SN  - 3-540-42889-5
SP  - 241
EP  - 254
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Probabilistic limit and shakedown problems
JF  - Numerical Methods for Limit and Shakedown Analysis. Deterministic and Probabilistic Approach. NIC Series Vol. 15 / Ed. by Staat, M; Heitzer, M.
Y1  - 2003
SN  - 3-00-010001-6
SP  - 217
EP  - 268
PB  - John von Neumann Institute for Computing (NIC)
CY  - Jülich
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - FEM-computation of load carrying capacity of highly loaded passive components by direct methods. Heitzer, M. ; Staat, M.
JF  - Nuclear Engineering and Design. 193 (1999), H. 3
Y1  - 1999
SN  - 0029-5493
SP  - 349
EP  - 358
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Fiorini, G. L.
A1  - Lensa, W. von
A1  - Burgazzi, L.
T1  - Reliability Methods for Passive Safety Functions
JF  - Proceedings of the SMiRT 14 Post Conference Seminar No 18 on Passive Safety Features in Nuclear Installations
Y1  - 1997
CY  - Pisa
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Baroud, G.
A1  - Topcu, M.
A1  - Sponagel, Stefan
T1  - Soft Materials in Technology and Biology – Characteristics, Properties, and Parameter Identification
JF  - Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)
Y1  - 2008
SN  - 978-3-540-75408-4
SP  - 253
EP  - 315
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Ballmann, J.
T1  - Computation of impacts on elastic solids by methods of bicharacteristics
JF  - Computational Mechanics '88 : theory and applications ; proceedings of the International Conference on Computational Engineering Science April 10-14, 1988, Atlanta, GA, USA ; vol. 2
N2  - Shock waves, explosions, impacts or cavitation bubble collapses may generate stress waves in solids causing cracks or unexpected dammage due to focussing, physical nonlinearity or interaction with existing cracks. There is a growing interest in wave propagation, which poses many novel problems to experimentalists and theorists.
KW  - Bicharakteristikenverfahren
KW  - Elastizität
KW  - elastic solids
KW  - bicharacteristics
Y1  - 1988
SP  - 1719
EP  - 1722
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Ballmann, J.
T1  - Zur Problematik tensorieller Verallgemeinerungen einachsiger nichtlinearer Materialgesetze
JF  - Zeitschrift für angewandte Mathematik und Mechanik : ZAMM. 69 (1989), H. 2
Y1  - 1989
SN  - 0946-8463
U6  - http://dx.doi.org/10.1515/9783112553169-006
SP  - 73
EP  - 81
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Ballmann, J.
T1  - Wave Propagation and Focussing in Plates
JF  - Impact loading and dynamic behaviour of materials : Papers presented at the International Conference on Impact Loading and Dynamic Behaviour of Materials, Vol. 2 /  Chiem, C. Y.; Kunze, L. (u.a.) [eds]
Y1  - 1988
PB  - DGM Informationsges.
CY  - Oberursel
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Ballmann, J.
T1  - Anisotrope Ausbreitung und Fokussierung von Beschleunigungswellen in vorgespannten nichtlinearelastischen Scheiben
JF  - Wellenfokussierung, Kolloquium des SFB 27, RWTH Aachen
Y1  - 1985
SP  - 140
EP  - 158
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Problems and Chances for Probabilistic Fracture Mechanics in the Analysis of Steel Pressure Boundary Reliability
JF  - Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in Jülich, 21-24 November 1994
Y1  - 1996
N1  - IAEA-TECDOC-920 ; Onlinezugriff erfolgt auf die überarb. Ausg. 2006
SP  - 43
EP  - 55
CY  - Vienna
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Sensitivity of and Influences on the Reliability of an HTR-Module Primary Circuit Pressure Boundary
JF  - Transactions of the 12th International Conference on Structural Mechanics in Reactor Technology (SMiRT-12) / Kussmaul, K. [ed]
Y1  - 1993
SN  - 0-444-81515-5
N1  - Vol. M, Paper MG10/2
SP  - 147
EP  - 152
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Reliability of the Primary Circuit Pressure Boundary of an HTR-Module under Accident Conditions
JF  - Safety and reliability assessment : an integral approach ; ESREL'93 ; proceedings of the European Safety and Reliability Conference, Munich, Germany, May 10th - 12th 1993 / Kafka, P. [ed]
Y1  - 1993
SN  - 0-444-81561-9
SP  - 331
EP  - 342
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Probabilistische Bewertung des bruchmechanischen Verhaltens der Primärkreisdruckumschließung eines HTR-Moduls
Y1  - 1992
N1  - 18. MPA-Seminar : Sicherheit und Verfügbarkeit in der Anlagentechnik mit dem Schwerpunkt Kernenergie. Stuttgart (1992), 27.1-27.18
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Versagenswahrscheinlichkeit der Primärkreisdruckumschließung eines HTR-Moduls zur Prozeßwärmegewinnung unter Störfallbedingungen bei verschiedenen Versagensmoden
Y1  - 1991
N1  - 17. MPA-Seminar : Sicherheit und Verfügbarkeit in der Anlagentechnik mit dem Schwerpunkt Kerntechnik, Stuttgart (1991), 22.1-22.20
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Some Achievements of the European Project LISA for FEM Based Limit and Shakedown Analysis
JF  - Computational mechanics : developments and applications, 2002 : presented at the 2002 ASME Pressure Vessels and Piping Conference, Vancouver, British Columbia, Canada, August 5 - 9. / Badie, N. [ed]
Y1  - 2002
SN  - 0791846520
N1  - Serie PVP ; vol. 441.
SP  - 177
EP  - 185
PB  - American Society of Mechanical Engineers
CY  - New York
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Versagenswahrscheinlichkeit der Primärkreisdruckumschließung eines HTR-Moduls zur Prozeßwärmegewinnung unter Störfallbedingungen
JF  - Jahrestagung Kerntechnik '91 / Kerntechnische Gesellschaft e.V. ; Deutsches Atomforum e.V
Y1  - 1991
SP  - 123
EP  - 126
PB  - INFORUM
CY  - Bonn
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Anisotrope Wellenausbreitung in isotropen hyperelastischen Scheiben
JF  - Zeitschrift für angewandte Mathematik und Mechanik : ZAMM. 67 (1987), H. 4
Y1  - 1987
SN  - 0946-8463
SP  - T241
EP  - T243
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Plastic collapse analysis of longitudinally flawed pipes and vessels
JF  - Nuclear Engineering and Design. 234 (2004), H. 1-3
Y1  - 2004
SN  - 0029-5493
SP  - 25
EP  - 43
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Local and global collapse pressure of longitudinally flawed pipes and cylindrical vessels
JF  - International Journal of Pressure Vessels and Piping. 82 (2005), H. 3
Y1  - 2005
SN  - 0308-0161
SP  - 217
EP  - 225
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Failure probabilities of the primary circuit pressure boundary of an HTR-Module for process heat generation under accident conditions for different failure modes
JF  - Nuclear Engineering and Design. 144 (1993), H. 1
Y1  - 1993
SN  - 0029-5493
SP  - 53
EP  - 67
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Reliability of an HTR-module primary circuit pressure boundary Influences, sensitivity, and comparison with a PWR
JF  - Nuclear Engineering and Design. 158 (1995), H. 2-3
Y1  - 1995
SN  - 0029-5493
SP  - 333
EP  - 340
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Probabilistic assessment of the fracture mechanics behaviour of an HTR-module primary circuit pressure boundary
JF  - Nuclear Engineering and Design. 160 (1996), H. 1-2
Y1  - 1996
SN  - 0029-5493
SP  - 221
EP  - 236
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Limit and shakedown analysis under uncertainty
JF  - International journal of computational methods : IJCM
Y1  - 2013
SN  - 0219-8762
SP  - Publ. online
PB  - World Scientific Publishing
CY  - Singapore
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Plastic collapse analysis of longitudinally flawed pipes and vessels
N2  - Improved collapse loads of thick-walled, crack containing pipes and vessels are suggested. Very deep cracks have a residual strength which is better modelled by a global limit load. In all burst tests, the ductility of pressure vessel steels was sufficiently high whereby the burst pressure could be predicted by limit analysis with no need to apply fracture mechanics. The relative prognosis error increases however, for long and deep defects due to uncertainties of geometry and strength data.
KW  - Druckbehälter
KW  - Stahl
KW  - Druckbelastung
KW  - Druckbeanspruchung
KW  - Rohr
KW  - Rohrbruch
KW  - Druckbehälter
KW  - Stahl
KW  - Druckbelastung
KW  - Druckbeanspruchung
KW  - Rohrbruch
KW  - Fehlerstellen
KW  - pipes
KW  - vessels
KW  - load limit
KW  - burst tests
KW  - burst pressure
KW  - flaw
Y1  - 2004
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Cyclic plastic deformation tests to verify FEM-based shakedown analyses
N2  - Fatigue analyses are conducted with the aim of verifying that thermal ratcheting is limited. To this end it is important to make a clear distintion between the shakedown range and the ratcheting range (continuing deformation). As part of an EU-supported research project, experiments were carried out using a 4-bar model. The experiment comprised a water-cooled internal tube, and three insulated heatable outer test bars. The system was subjected to alternating axial forces, superimposed with alternating temperatures at the outer bars. The test parameters were partly selected on the basis of previous shakedown analyses. During the test, temperatures and strains were measured as a function of time. The loads and the resulting stresses were confirmed on an ongoing basis during performance of the test, and after it. Different material models were applied for this incremental elasto-plastic analysis using the ANSYS program. The results of the simulation are used to verify the FEM-based shakedown analysis.
KW  - Materialermüdung
KW  - Einspielen <Werkstoff>
KW  - Materialermüdung
KW  - shakedown analyses
KW  - thermal ratcheting
KW  - fatigue analyses
Y1  - 2001
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Local and global collapse pressure of longitudinally flawed pipes and cylindrical vessels
N2  - Limit loads can be calculated with the finite element method (FEM) for any component, defect geometry, and loading. FEM suggests that published long crack limit formulae for axial defects under-estimate the burst pressure for internal surface defects in thick pipes while limit loads are not conservative for deep cracks and for pressure loaded crack-faces. Very deep cracks have a residual strength, which is modelled by a global collapse load. These observations are combined to derive new analytical local and global collapse loads. The global collapse loads are close to FEM limit analyses for all crack dimensions.
KW  - Finite-Elemente-Methode
KW  - Grenzwertberechnung
KW  - Axialbelastung
KW  - FEM
KW  - Grenzwertberechnung
KW  - Axialbelastung
KW  - Traglastanalyse
KW  - Limit analysis
KW  - Global and local collapse
KW  - Axially cracked pipe
KW  - Pressure loaded crack-face
Y1  - 2005
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Direct finite element route for design-by-analysis of pressure components
N2  - In the new European standard for unfired pressure vessels, EN 13445-3, there are two approaches for carrying out a Design-by-Analysis that cover both the stress categorization method (Annex C) and the direct route method (Annex B) for a check against global plastic deformation and against progressive plastic deformation. This paper presents the direct route in the language of limit and shakedown analysis. This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for mechanical and thermal actions. One observation from the examples is that the so-called 3f (3Sm) criterion fails to be a reliable check against progressive plastic deformation. Precise conditions are given, which greatly restrict the applicability of the 3f criterion.
KW  - Einspielen <Werkstoff>
KW  - Plastizität
KW  - Deformation
KW  - Analytischer Zulaessigkeitsnachweis
KW  - Einspiel-Analyse
KW  - fortschreitende plastische Deformation
KW  - alternierend Verformbarkeit
KW  - Einspiel-Kriterium
KW  - Design-by-analysis
KW  - Shakedown analysis
KW  - Progressive plastic deformation
KW  - Alternating plasticity
KW  - Shakedown criterion
Y1  - 2005
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Shakedown and ratchetting under tension-torsion loadings: analysis and experiments
N2  - Structural design analyses are conducted with the aim of verifying the exclusion of ratchetting. To this end it is important to make a clear distinction between the shakedown range and the ratchetting range. The performed experiment comprised a hollow tension specimen which was subjected to alternating axial forces, superimposed with constant moments. First, a series of uniaxial tests has been carried out in order to calibrate a bounded kinematic hardening rule. The load parameters have been selected on the basis of previous shakedown analyses with the PERMAS code using a kinematic hardening material model. It is shown that this shakedown analysis gives reasonable agreement between the experimental and the numerical results. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis.
KW  - Einspielen <Werkstoff>
KW  - Einspielen
KW  - Ratchetting
KW  - Zug-Druck Belastung
KW  - shakedown
KW  - ratchetting
KW  - tension–torsion loading
Y1  - 2003
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Basis Reduction for the Shakedown Problem for Bounded Kinematic Hardening Material
N2  - Limit and shakedown analysis are effective methods for assessing the load carrying capacity of a given structure. The elasto–plastic behavior of the structure subjected to loads varying in a given load domain is characterized by the shakedown load factor, defined as the maximum factor which satisfies the sufficient conditions stated in the corresponding static shakedown theorem. The finite element dicretization of the problem may lead to very large convex optimization. For the effective solution a basis reduction method has been developed that makes use of the special problem structure for perfectly plastic material. The paper proposes a modified basis reduction method for direct application to the two-surface plasticity model of bounded kinematic hardening material. The considered numerical examples show an enlargement of the load carrying capacity due to bounded hardening.
KW  - Finite-Elemente-Methode
KW  - Einspielen <Werkstoff>
KW  - Basis Reduktion
KW  - konvexe Optimierung
KW  - FEM
KW  - Druckgeräte
KW  - Basis reduction
KW  - Convex optimization
KW  - FEM
KW  - Shakedown analysis
Y1  - 2000
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - LISA - a European project for FEM-based limit and shakedown analysis
N2  - The load-carrying capacity or the safety against plastic limit states are the central questions in the design of structures and passive components in the apparatus engineering. A precise answer is most simply given by limit and shakedown analysis. These methods can be based on static and kinematic theorems for lower and upper bound analysis. Both may be formulated as optimization problems for finite element discretizations of structures. The problems of large-scale analysis and the extension towards realistic material modelling will be solved in a European research project. Limit and shakedown analyses are briefly demonstrated with illustrative examples.
KW  - Einspielen <Werkstoff>
KW  - Traglast
KW  - Finite-Elemente-Methode
KW  - Traglastanalyse
KW  - Einspielanalyse
KW  - FEM
KW  - limit analysis
KW  - shakedown analysis
Y1  - 2001
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Direct FEM Limit and Shakedown Analysis with Uncertain Data
N2  - The structural reliability with respect to plastic collapse or to inadaptation is formulated on the basis of the lower bound limit and shakedown theorems. A direct definition of the limit state function is achieved which permits the use of the highly effective first order reliability methods (FORM) is achieved. The theorems are implemented into a general purpose FEM program in a way capable of large-scale analysis. The limit state function and its gradient are obtained from a mathematical optimization problem. This direct approach reduces considerably the necessary knowledge of uncertain technological input data, the computing time, and the numerical error, leading to highly effective and precise reliability analyses.
KW  - Finite-Elemente-Methode
KW  - Einspielen <Werkstoff>
KW  - FEM
KW  - Einspielanalyse
KW  - shakedown
KW  - limit load
KW  - reliability analysis
KW  - FEM
KW  - direct method
Y1  - 2000
ER  - 
TY  - JOUR
A1  - Staat, Manfred
T1  - Limit and shakedown analysis under uncertainty
JF  - Tap chi Khoa hoc & ung dung - Dai hoc Ton Duc Thang
Y1  - 2012
N1  - = Journal of Applied Sciences - Ton Duc Thang University
VL  - 19
SP  - 45
EP  - 47
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Unger, J.
A1  - Spies, K. H.
T1  - Härtebegriff im Zusammenhang mit Vernetzung, Bruchdehnung und Dauerfestigkeit eines Elastomers
JF  - Kautschuk Gummi Kunststoffe. 56 (2003), H. 11
Y1  - 2003
SN  - 0948-3276
SP  - 608
EP  - 613
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Unger, J.
T1  - Organisation und Strukturierung technischer Messungen
JF  - Werkstattstechnik. 88 (1998), H. 5
Y1  - 1998
SN  - 1436-5006
SP  - 223
EP  - 226
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Spaltofski, R.
A1  - Steinhilper, W.
T1  - Hochmolekulare Additive für die Gleitlagerschmierung. Spaltofski, R.; Sponagel, S.; Steinhilper, W.
JF  - Tribologie und Schmierungstechnik. 35 (1988), H. 5
Y1  - 1988
SN  - 0036-6218
SP  - 236
EP  - 241
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Spaltofski, R.
T1  - Hochmolekulare Zusätze verbessern die Leichtlaufeigenschaft und die Tragfähigkeit von Schmierfilmen / Sponagel, S.  ; Spaltofski, R.
JF  - Mineralöltechnik. 32 (1987), H. 3
Y1  - 1987
SN  - 0341-1893
SP  - 28 S.
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Müller, H.
T1  - Exakte instationäre Lösungen der Navier-Stokes-Gleichung. H. Müller, S. Sponagel
JF  - Zeitschrift für angewandte Mathematik und Mechanik: ZAMM. 63 (1983)
Y1  - 1983
SN  - 0044-2267
N1  - weitere ISSN: 0946-8463
SP  - T273
EP  - T275
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Lutz, Th.
T1  - Ein Beitrag zur Bestimmung der Haertewerte von Elastomeren
JF  - Kautschuk Gummi Kunststoffe. 43 (1990), H. 10
Y1  - 1990
SN  - 0022-9520
SP  - 861
EP  - 865
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Lutz, T.
T1  - Aggregatelager
JF  - Kautschuk Gummi Kunststoffe. 43 (1990), H. 5
Y1  - 1990
SN  - 0022-9520
SP  - 397
EP  - 406
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Kilthau, G.
A1  - Spies, K. H.
T1  - Sealing mechanism of lip seals
JF  - Eleventh 11th International Conference on Fluid Sealing : proceedings of the 11th Internat. Conference on Fluid Sealing, held at Cannes, France 8 - 10 April, 1987 / organised and sponsored by BHRA, the Fluid Engineering Centre. Ed. B. S. Nau
Y1  - 1987
SN  - 3-540-51383-3
N1  - International Conference on Fluid Sealing <11, 1987, Cannes>
SP  - 748
EP  - 772
PB  - Elsevier
CY  - London
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Groling, G.
T1  - Eine Bemerkung zum Beweis des &#960; Theorems. G. Groling, S. Sponagel
JF  - Zeitschrift für angewandte Mathematik und Mechanik: ZAMM. 63 (1983)
Y1  - 1983
SN  - 0044-2267
N1  - weitere ISSN: 0946-8463
SP  - T258
EP  - T259
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Becker, E.
T1  - Reibungsfreie, ebene Diffusorströmung mit beliebigem Einlaufprofil. E. Becker, S. Sponagel
JF  - Zeitschrift für angewandte Mathematik und Mechanik: ZAMM. 64 (1984)
Y1  - 1984
SN  - 0044-2267
N1  - weitere ISSN: 0946-8463
SP  - T174
EP  - T177
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Baroud, G.
A1  - Steffen, T.
A1  - Wu, J.
T1  - Parameter identification for cement infiltration of osteoporotic bone
JF  - Poromechanics II : Proceedings of the Second Biot Conference on Poromechanics Grenoble, France 26 - 28 August 2002 / ed. by J.-L. Auriault ...
Y1  - 2002
SN  - 90-5809-394-8
SP  - 55
EP  - 58
PB  - Balkema
CY  - Lisse [u.a.]
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Baroud, G.
A1  - Falk, R.
A1  - Crookshank, M.
T1  - Experimental and theoretical investigation of directional permeability of human vertebral cancellous bone for cement infiltration. G. Baroud, R. Falk, M. Crookshank, S. Sponagel, T. Steffen
JF  - Journal of Biomechanics. 37 (2004), H. 2
Y1  - 2004
SN  - 0021-9290
SP  - 189
EP  - 196
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Baroud, G.
A1  - Falk, R.
A1  - Crookshank, M.
T1  - Corrigendum to “Experimental and theoretical investigation of directional permeability of human vertebral cancellous bone for cement infiltration”. Baroud, G.; Falk, R.; Crookshank, M.; Sponagel, S.; Steffen, T.
JF  - Journal of Biomechanics. 37 (2004), H. 2
Y1  - 2004
SN  - 0021-9290
SP  - 1802
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Akbay, U.
A1  - Becker, E.
A1  - Krozer, S.
T1  - Instability of slow viscometric flow
JF  - Mechanics Research Communications. 7 (1980), H. 4
Y1  - 1980
SN  - 0093-6413
SP  - 199
EP  - 204
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Akbay, U.
A1  - Becker, E.
T1  - Instability of plane Couette flow of viscoelastic liquids
JF  - Journal of non-Newtonian fluid mechanics. 18 (1985), H. 2
Y1  - 1985
SN  - 0377-0257
SP  - 123
EP  - 141
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Akbay, U.
T1  - Über den Mechanismus der Oberflächeninstabilität viskosimetrischer Strömungen
JF  - Rheologica Acta. 23 (1984), H. 2
Y1  - 1984
SN  - 0035-4511
SP  - 185
EP  - 188
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Akbay, U.
T1  - Über den Relaxationseinfluß auf die Stabilität der ebenen Couette-Strömung. Akbay, U. ; Sponagel, S.
JF  - Rheologica Acta. 23 (1984), H. 2
Y1  - 1984
SN  - 0035-4511
SP  - 177
EP  - 184
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Akbay, S.
T1  - Über die Stabilität viskometrischer Strömungen
JF  - Rheologica acta. 20 (1981), H. 6
Y1  - 1981
SN  - 0035-4511
SP  - 579
EP  - 590
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Adbay, U.
A1  - Becker, E.
A1  - Krozer, S.
T1  - A possible cause of viscoelastic turbulence
JF  - Rheology : proceedings of the 8th International Congress of Rheology, held in Naples, Italy, September 1 - 5, 1980 / Hrsg. von Giovanni Astarita, Vol. 2
Y1  - 1980
SN  - 0-306-40465-6
SP  - 79
EP  - 84
PB  - Plenum Pr.
CY  - New York
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
T1  - Analytische Berechnung von Gummi- Metall- Verbindungen
JF  - Konstruktion : Zeitschrift für Produktentwicklung. 39 (1987), H. 4
Y1  - 1987
SN  - 0373-3300
SP  - 151
EP  - 158
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
T1  - Der Mensch als Läufer
JF  - Orthopädie und Sport : [Bericht zum Stolberger Orthopädietag, 13. Juni 1998]
Y1  - 1999
SN  - 978-3-89124-540-8
N1  - Inhaltsverzeichnis unter http://www.m-m-sports.com/mm_objects/previews/978-3-89124-540-8p.pdf
SP  - 15
EP  - 21
PB  - Meyer & Meyer
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Spelthahn, Heiko
A1  - Schubert, Jürgen
A1  - Schöning, Michael Josef
T1  - Dünnschichtsensoren für die Schwermetallanalytik
JF  - GIT : Labor-Fachzeitschrift
N2  - Die Detektion von Schadstoffen repräsentiert in der Umweltanalytik eine wichtige Aufgabenstellung. Gerade die Abwasser- bzw. Brauchwasseranalytik sowie die Prozesskontrolle haben einen hohen Stellenwert. Siliziumbasierte Dünnschichtsensoren bieten eine kostengünstige Möglichkeit, „online“-Messungen bzw. Vor-Ort-Messungen zeitnah durchzuführen. In dieser Arbeit wird ein potentiometrisches Sensorarray auf der Basis von Chalkogenidgläsern zur Detektion von Schwermetallen in wässrigen Medien vorgestellt.
Y1  - 2012
SN  - 0016-3538
VL  - 56
IS  - 4
SP  - 285
EP  - 287
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Spelthahn, Heiko
A1  - Schubert, Jürgen
A1  - Schöning, Michael Josef
T1  - Dünnschichtsensoren für die Schwermetallanalytik : Mikroelektroden auf Chalkogenidglasbasis
JF  - GIT Labor-Fachzeitschrift
N2  - Die Detektion von Schadstoffen repräsentiert in der Umweltanalytik eine wichtige Aufgabenstellung. Gerade die Abwasser- bzw. Brauchwasseranalytik sowie die Prozesskontrolle haben einen hohen Stellenwert. Siliziumbasierte Dünnschichtsensoren bieten eine kostengünstige Möglichkeit, „online“-Messungen bzw. Vor-Ort-Messungen zeitnah durchzuführen. In dieser Arbeit wird ein potentiometrisches Sensorarray auf der Basis von Chalkogenidgläsern zur Detektion von Schwermetallen in wässrigen Medien vorgestellt.
Y1  - 2012
IS  - 4
SP  - 285
EP  - 287
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Spelthahn, Heiko
A1  - Schaffrath, Sophie
A1  - Coppe, Thomas
A1  - Rufi, Frederic
A1  - Schöning, Michael Josef
T1  - Development of an electrolyte-insulator-semiconductor (EIS) based capacitive heavy metal sensor for the detection of Pb2+ und Cd2+ ions
JF  - Physica status solidi (a) : applications and material science. 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 930
EP  - 934
ER  - 
TY  - JOUR
A1  - Spelthahn, Heiko
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Self-aligned nanogaps and nanochannels via conventional photolithography and pattern-size reduction technique
JF  - Electrochimica Acta. 54 (2009), H. 25 Sp. Iss. SI
Y1  - 2009
SN  - 0013-4686
SP  - 6010
EP  - 6014
ER  - 
TY  - JOUR
A1  - Spelthahn, Heiko
A1  - Kirsanov, Dmitry
A1  - Legin, Andrey
A1  - Osterrath, Thomas
A1  - Schubert, Jürgen
A1  - Zander, Willi
A1  - Schöning, Michael Josef
T1  - Development of a thin-film sensor array for analytical monitoring of heavy metals in aqueous solutions
JF  - Physica Status Solidi (a)
N2  - In industrial processes there is a variety of heavy metals (e.g., copper, zinc, cadmium, and lead) in use for wires, coatings, paints, alloys, batteries, etc. Since the application of these transition metals for industry is inevitable, it is a vital task to develop proper analytical techniques for their monitoring at low activity levels, especially because most of these elements are acutely toxic for biological organisms. The determination of ions in solution by means of a simple and inexpensive sensor array is, therefore, a promising task. In this work, a sensor array with heavy metal-sensitive chalcogenide glass membranes for the simultaneous detection of the four ions Ag⁺, Cu2⁺, Cd2⁺, and Pb2⁺ in solution is realized. The results of the physical characterization by means of microscopy, profilometry, Rutherford backscattering spectroscopy (RBS), and scanning electron microscopy (SEM) as well as the electrochemical characterization by means of potentiometric measurements are presented. Additionally, the possibility to expand the sensor array by polymeric sensor membranes is discussed.
Y1  - 2012
SN  - 1862-6319
U6  - http://dx.doi.org/10.1002/pssa.201100733
VL  - 209
IS  - 5
SP  - 885
EP  - 891
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Sousa, Marcos A. M.
A1  - Siqueira, Jose R. Jr.
A1  - Vercik, Andres
A1  - Schöning, Michael Josef
A1  - Oliveira, Osvaldo N. Jr.
T1  - Determining the optimized layer-by-layer film architecture with dendrimer/carbon nanotubes for field-effect sensors
JF  - IEEE Sensors Journal
N2  - The capacitive electrolyte–insulator–semiconductor (EIS) structure is a typical device based on a field-effect sensor platform. With a simple silicon-based structure, EIS have been useful for several sensing applications, especially with incorporation of nanostructured films to modulate the ionic transport and the flat-band potential. In this paper, we report on ion transport and changes in flat-band potential in EIS sensors made with layer-by-layer films containing poly(amidoamine) (PAMAM) dendrimer and single-walled carbon nanotubes (SWNTs) adsorbed on p-Si/SiO 2 /Ta 2 O 5 chips with an Al ohmic contact. The impedance spectra were fitted using an equivalent circuit model, from which we could determine parameters such as the double-layer capacitance. This capacitance decreased with the number of bilayers owing to space charge accumulated at the electrolyte–insulator interface, up to three PAMAM/SWNTs bilayers, after which it stabilized. The charge-transfer resistance was also minimum for three bilayers, thus indicating that this is the ideal architecture for an optimized EIS performance. The understanding of the influence of nanostructures and the fine control of operation parameters pave the way for optimizing the design and performance of new EIS sensors.
Y1  - 2017
U6  - http://dx.doi.org/10.1109/JSEN.2017.2653238
SN  - 1558-1748
VL  - 17
IS  - 6
SP  - 1735
EP  - 1740
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Slabu, Ioana
A1  - Roeth, Anjali A.
A1  - Engelmann, Ulrich M.
A1  - Wiekhorst, Frank
A1  - Buhl, Eva M.
A1  - Neumann, Ulf P.
A1  - Schmitz-Rode, Thomas
T1  - Modeling of magnetoliposome uptake in human pancreatic tumor cells in vitro
JF  - Nanotechnology
Y1  - 2019
U6  - http://dx.doi.org/10.1088/1361-6528/ab033e
SN  - 1361-6528
VL  - 30
IS  - 18
SP  - 184004
ER  - 
TY  - JOUR
A1  - Siqueira, José R. Jr.
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Zucolotto, Valtencir
A1  - Oliveira, Osvaldo N. Jr.
A1  - Schöning, Michael Josef
T1  - Associating biosensing properties with the morphological structure of multilayers containing carbon nanotubes on field-effect devices
JF  - Physica status solidi (a). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 781
EP  - 786
ER  - 
TY  - JOUR
A1  - Siqueira, José R. Jr.
A1  - Abouzar, Maryam H.
A1  - Poghossian, Arshak
A1  - Zucolotto, Valtencir
A1  - Oliveira, Osvaldo N. Jr.
A1  - Schöning, Michael Josef
T1  - Penicillin biosensor based on a capacitive field-effect structure functionalized with a dendrimer/carbon nanotube multilayer
JF  - Biosensors and Bioelectronics. 25 (2009), H. 2
Y1  - 2009
SN  - 0956-5663
SP  - 497
EP  - 501
ER  - 
TY  - JOUR
A1  - Siqueira, José R. Jr.
A1  - Abouzar, Maryam H.
A1  - Bäcker, Matthias
A1  - Zucolotto, Valtencir
A1  - Poghossian, Arshak
A1  - Oliveira, Osvaldo N. Jr.
A1  - Schöning, Michael Josef
T1  - Carbon nanotubes in nanostructured films: Potential application as amperometric and potentiometric field-effect (bio-)chemical sensors
JF  - physica status solidi (a) . 206 (2009), H. 3
Y1  - 2009
SN  - 1862-6319
N1  - Special Issue: Engineering of Functional Interfaces (EnFI 08)
SP  - 462
EP  - 467
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Siqueira, Jose R.
A1  - Werner, Frederik
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Zucolotto, Valtencir
A1  - Oliveira, Osvaldo N. Jr.
A1  - Schöning, Michael Josef
T1  - Layer-by-Layer Assembly of Carbon Nanotubes Incorporated in Light-Addressable Potentiometric Sensors
JF  - Journal of Physical Chemistry C. 113 (2009), H. 33
Y1  - 2009
SN  - 1932-7455
SP  - 14765
EP  - 14770
PB  - American Chemical Society
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Siqueira, Jose R.
A1  - Molinnus, Denise
A1  - Beging, Stefan
A1  - Schöning, Michael Josef
T1  - Incorporating a hybrid urease-carbon nanotubes sensitive nanofilm on capacitive field-effect sensors for urea detection
JF  - Analytical chemistry
N2  - The ideal combination among biomolecules and nanomaterials is the key for reaching biosensing units with high sensitivity. The challenge, however, is to find out a stable and sensitive film architecture that can be incorporated on the sensor’s surface. In this paper, we report on the benefits of incorporating a layer-by-layer (LbL) nanofilm of polyamidoamine (PAMAM) dendrimer and carbon nanotubes (CNTs) on capacitive electrolyte-insulator-semiconductor (EIS) field-effect sensors for detecting urea. Three sensor arrangements were studied in order to investigate the adequate film architecture, involving the LbL film with the enzyme urease: (i) urease immobilized directly onto a bare EIS [EIS-urease] sensor; (ii) urease atop the LbL film over the EIS [EIS-(PAMAM/CNT)-urease] sensor; and (iii) urease sandwiched between the LbL film and another CNT layer [EIS-(PAMAM/CNT)-urease-CNT]. The surface morphology of all three urea-based EIS biosensors was investigated by atomic force microscopy (AFM), while the biosensing abilities were studied by means of capacitance–voltage (C/V) and dynamic constant-capacitance (ConCap) measureaments at urea concentrations ranging from 0.1 mM to 100 mM. The EIS-urease and EIS-(PAMAM/CNT)-urease sensors showed similar sensitivity (∼18 mV/decade) and a nonregular signal behavior as the urea concentration increased. On the other hand, the EIS-(PAMAM/CNT)-urease-CNT sensor exhibited a superior output signal performance and higher sensitivity of about 33 mV/decade. The presence of the additional CNT layer was decisive to achieve a urea based EIS sensor with enhanced properties. Such sensitive architecture demonstrates that the incorporation of an adequate hybrid enzyme-nanofilm as sensing unit opens new prospects for biosensing applications using the field-effect sensor platform.
Y1  - 2014
U6  - http://dx.doi.org/10.1021/ac500458s
SN  - 1520-6882 (E-Journal); 0003-2700 (Print); 0096-4484 (Print)
VL  - 86
IS  - 11
SP  - 5370
EP  - 5375
PB  - ACS Publications
CY  - Columbus
ER  - 
TY  - JOUR
A1  - Siqueira, Jose R.
A1  - Maki, Rafael M.
A1  - Paulovich, Fernando V.
A1  - Werner, Frederik
A1  - Poghossian, Arshak
A1  - Oliveira, Maria C. F. de
A1  - Zucolotto, Valtencir
A1  - Oliveira, Osvaldo N. Jr.
A1  - Schöning, Michael Josef
T1  - Use of Information Visualization Methods Eliminating Cross Talk in Multiple Sensing Units Investigated for a Light-Addressable Potentiometric Sensor
JF  - Analytical Chemistry  (2010)
Y1  - 2010
SN  - 0003-2700
SP  - 61
EP  - 65
ER  - 
TY  - JOUR
A1  - Simonis, A.
A1  - Ruge, C.
A1  - Müller-Veggian, Mattea
A1  - Lüth, H.
A1  - Schöning, Michael Josef
T1  - A long-term stable macroporoustype EIS structure for electrochemical sensor applications
JF  - Sensors and Actuators B. 91 (2003), H. 1-3
Y1  - 2003
SN  - 0925-4005
SP  - 21
EP  - 25
ER  - 
TY  - JOUR
A1  - Simonis, A.
A1  - Lüth, H.
A1  - Wang, J.
A1  - Schöning, Michael Josef
T1  - Miniaturisierte Referenzelektroden in Siliziumtechnologie für elektrochemische Sensoranwendungen
JF  - Sensoren und Messsysteme 2004 : Tagung Ludwigsburg, 15. und 16. März 2004 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik
Y1  - 2004
SN  - 3-18-091829-2
N1  - Auch erschienen als: VDI-Berichte ; 1829
SP  - 847
EP  - 850
PB  - VDI
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Simonis, A.
A1  - Lüth, H.
A1  - Wang, J.
A1  - Schöning, Michael Josef
T1  - New concepts of miniaturised reference electrodes in silicon technology for potentiometric sensor systems
JF  - Sensors and Actuators B. 103 (2004), H. 1-2
Y1  - 2004
SN  - 0925-4005
SP  - 429
EP  - 435
ER  - 
TY  - JOUR
A1  - Simonis, A.
A1  - Lüth, H.
A1  - Wang, J.
A1  - Schöning, Michael Josef
T1  - Strategies of miniaturised reference electrodes integrated in a silicon-based „one chip“ pH sensor
JF  - Sensors. 3 (2003), H. 9
Y1  - 2003
SN  - 1424-8220
SP  - 330
EP  - 339
ER  - 
TY  - JOUR
A1  - Simonis, A.
A1  - Krings, T.
A1  - Lüth, H.
A1  - Wang, J.
A1  - Schöning, Michael Josef
T1  - A „hybrid“ thin-film pH sensor with integrated thick-film reference
JF  - Sensors. 1 (2001), H. 6
Y1  - 2001
SN  - 1424-8220
SP  - 183
EP  - 192
ER  - 
TY  - JOUR
A1  - Simonis, A.
A1  - Dawgul, M.
A1  - Lüth, H.
A1  - Schöning, Michael Josef
T1  - Miniaturised reference electrodes for field-effect sensors compatible to silicon chip technology
JF  - Electrochimica Acta. 51 (2005), H. 5
Y1  - 2005
SN  - 0013-4686
U6  - http://dx.doi.org/10.1016/j.electacta.2005.04.063
SP  - 930
EP  - 937
ER  - 
TY  - JOUR
A1  - Sildatke, Michael
A1  - Karwanni, Hendrik
A1  - Kraft, Bodo
A1  - Zündorf, Albert
T1  - A distributed microservice architecture pattern for the automated generation of information extraction pipelines
JF  - SN Computer Science
N2  - Companies often build their businesses based on product information and therefore try to automate the process of information extraction (IE). Since the information source is usually heterogeneous and non-standardized, classic extract, transform, load techniques reach their limits. Hence, companies must implement the newest findings from research to tackle the challenges of process automation. They require a flexible and robust system that is extendable and ensures the optimal processing of the different document types. This paper provides a distributed microservice architecture pattern that enables the automated generation of IE pipelines. Since their optimal design is individual for each input document, the system ensures the ad-hoc generation of pipelines depending on specific document characteristics at runtime. Furthermore, it introduces the automated quality determination of each available pipeline and controls the integration of new microservices based on their impact on the business value. The introduced system enables fast prototyping of the newest approaches from research and supports companies in automating their IE processes. Based on the automated quality determination, it ensures that the generated pipelines always meet defined business requirements when they come into productive use.
KW  - Architectural design
KW  - Model-driven software engineering
KW  - Software and systems modeling
KW  - Enterprise information systems
KW  - Information extraction
Y1  - 2023
U6  - http://dx.doi.org/10.1007/s42979-023-02256-4
SN  - 2661-8907
N1  - Corresponding authors: Michael Sildatke, Hendrik Karwanni
IS  - 4, Article number: 833
PB  - Springer Singapore
CY  - Singapore
ER  - 
TY  - JOUR
A1  - Seynnes, O. R.
A1  - Bojsen-Moller, J.
A1  - Albracht, Kirsten
A1  - Arndt, A.
A1  - Cronin, N. J.
A1  - Finni, T.
A1  - Magnusson, S. P.
T1  - Ultrasound-based testing of tendon mechanical properties: a critical evaluation
JF  - Journal of Applied Physiology
Y1  - 2015
U6  - http://dx.doi.org/10.1152/japplphysiol.00849.2014
SN  - 8750-7587
VL  - 118
IS  - 2
SP  - 133
EP  - 141
ER  - 
TY  - JOUR
A1  - Seifarth, Volker
A1  - Schehl, D.
A1  - Linder, Peter
A1  - Gossmann, Matthias
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Porst, Dariusz
A1  - Preiß, C.
A1  - Kayser, Peter
A1  - Pack, O.
A1  - Temiz Artmann, Aysegül
T1  - Ureplace: development of a bioreactor for in vitro culturing of cell seeded tubular vessels on collagen scaffolds
N2  - The demand of replacements for inoperable organs exceeds the amount of available organ transplants. Therefore, tissue engineering developed as a multidisciplinary field of research for autologous in-vitro organs. Such three dimensional tissue constructs request the application of a bioreactor. The UREPLACE bioreactor is used to grow cells on tubular collagen scaffolds OPTIMAIX Sponge 1 with a maximal length of 7 cm, in order to culture in vitro an adequate ureter replacement. With a rotating unit, (urothelial) cells can be placed homogeneously on the inner scaffold surface. Furthermore, a stimulation is combined with this bioreactor resulting in an orientation of muscle cells. These culturing methods request a precise control of several parameters and actuators. A combination of a LabBox and the suitable software LabVision is used to set and conduct parameters like rotation angles, velocities, pressures and other important cell culture values. The bioreactor was tested waterproof successfully. Furthermore, the temperature controlling was adjusted to 37 °C and the CO2 - concentration regulated to 5 %. Additionally, the pH step responses of several substances showed a perfect functioning of the designed flow chamber. All used software was tested and remained stable for several days.
KW  - Tissue Engineering
KW  - Bioreaktor
KW  - Organkultur
KW  - Harnleiter
Y1  - 2011
ER  - 
TY  - JOUR
A1  - Seidova, Seid-Fatima
A1  - Kotliar, Konstantin
A1  - Foerger, Frauke
A1  - Klopfer, Matthias
A1  - Lanzl, Ines
T1  - Functional retinal changes in Gaucher disease
JF  - Documenta Ophthalmologica
Y1  - 2009
SN  - 1573-2622
VL  - 118
IS  - 2
SP  - 151
EP  - 154
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Schütz, S.
A1  - Weißbecker, G.
A1  - Schroth, P.
A1  - Schöning, Michael Josef
T1  - Linkage of inanimate structures to biological systems – smart materials in biological micro- nanosystems
JF  - Smart materials : proceedings of the 1st Caesarium, Bonn, November 17 - 19, 1999 / Karl-Heinz Hoffmann ed.
Y1  - 2001
SN  - 3-540-67957-X
SP  - 149
EP  - 157
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Schütz, S.
A1  - Weißbecker, B.
A1  - Hummel, Hans E.
A1  - Schöning, Michael Josef
A1  - Riemer, A.
A1  - Kordos, P.
A1  - Lüth, H.
T1  - Field effect transistor-insect antenna junction
JF  - Naturwissenschaften
Y1  - 1997
SN  - 1432-1904
VL  - 84
SP  - 86
EP  - 88
ER  - 
TY  - JOUR
A1  - Schütz, S.
A1  - Schöning, Michael Josef
A1  - Schroth, P.
A1  - Weißbecker, B.
A1  - Kordos, P.
A1  - Lüth, H.
A1  - Hummel, Hans E.
T1  - An insectbased BioFET as a bioelectronic nose
JF  - Sensors and Actuators B. 65 (2000), H. 1-3
Y1  - 2000
SN  - 0925-4005
SP  - 291
EP  - 295
ER  - 
TY  - JOUR
A1  - Schütz, S.
A1  - Schöning, Michael Josef
A1  - Schroth, P.
A1  - Weißbecker, B.
A1  - Kordos, P.
A1  - Lüth, H.
A1  - Hummel, Hans E.
T1  - An insectbased BioFET as a bioelectronic nose
JF  - Proceedings of the Seventh International Meeting on Chemical Sensors : 27 - 30 July, 1998, Beijing, P. R. China / ed. Zhi-Gang Zhou
Y1  - 1998
N1  - International Meeting on Chemical Sensors ; (7, 1998, Beijing) ; International Meeting on Chemical Sensors (IMCS) ; (7 : ; 1998.07.27-30 : ; Beijing)
SP  - 314
EP  - 316
PB  - Elsevier
CY  - Amsterdam [u.a.]
ER  - 
TY  - JOUR
A1  - Schütz, S.
A1  - Hummel, Hans E.
A1  - Schöning, Michael Josef
A1  - Schroth, P.
A1  - Kordos, P.
A1  - Lüth, H.
A1  - Zimmermann, S.
A1  - Schwarz, A.
A1  - Kohl, C.-D.
A1  - Koczan, D.
T1  - Applications and perspectives of biosensors based on insect olfaction
JF  - Sensor 99 : proceedings / 9th International Fair and Conference for Sensors, Transducers & Systems, May 18 - 20, 1999, Exhibition Centre Nürnberg/Germany
Y1  - 1999
N1  - Internationale Messe mit Kongreß für Sensoren, Meßaufnehmer & Systeme ; (9, 1999, Nürnberg)
SP  - 99
EP  - 104
PB  - AMA Service
CY  - Wunstorf
ER  - 
TY  - JOUR
A1  - Schütz, S.
A1  - Czynski, J.
A1  - Hummel, Hans E.
A1  - Schöning, Michael Josef
A1  - Schroth, P.
A1  - Kordos, P.
A1  - Lüth, H.
T1  - Insect meets microelectronics: A BioFET as a first step to bioelectronic microsystems
JF  - Transducers '99 : proceedings of the Tenth International Conference on Solid-State Sensors and Actuators ; 7 - 10 June, 1999, Sendai, Japan / ed.: S. Middelhoek
Y1  - 2000
N1  - International Conference on Solid State Sensors and Actuators <10, 1999, Sendai, Miyagi-ken> ; Transducers '99 ; (10 : ; 1999.06.07-10 : ; Sendai)
SP  - 1104
EP  - 1107
PB  - Elsevier
CY  - Amsterdam [u.a.]
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
A1  - Schubert, J.
A1  - Steffen, A.
A1  - Lüth, H.
T1  - Innovative Schichttechniken und Messprinzipien für kapazitive Feldeffektsensoren
JF  - Sensoren und Mess-Systeme : Vorträge der 11. ITG/GMA-Fachtagung vom 11. bis 12. März 2002 in Ludwigsburg / Veranst.: Informationstechnische Gesellschaft im VDE (ITG) ... Wiss. Tagungsleitung: C. D. Kohl ....
Y1  - 2002
SN  - 3-8007-2675-0
N1  - Sensoren und Mess-Systeme 2002
SP  - 151
EP  - 154
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Weidenbrück, B.
A1  - Thust, M.
A1  - Kordos, P.
A1  - Lüth, H.
T1  - A silicon-based sensor array with capacitive EIS structures
JF  - Proceedings of the 11th European Conference on Solid-State Transducers / Eurosensors XI, September 21 - 24, 1997, Warsaw, Poland. [Organised by] Warsaw University of Technology. Vol 2.
Y1  - 1997
SN  - 83-908335-0-6
N1  - Eurosensors ; (11, 1997, Warszawa) ; Eurosensors - European Conference on Solid-State Transducers ; (11 : ; 1997.09.21-24 : ; Warsaw)
SP  - 871
EP  - 874
PB  - Sensor Lab Sp.
CY  - Warsaw
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Wang, Josepf
A1  - Krause, Robin
A1  - Block, Kirstin
A1  - Musameh, Mustafa
A1  - Mulchandani, Ashok
A1  - Mulchandani, Priti
A1  - Chen, Wilfred
T1  - Dual amperometric-potentiometric biosensor detection system for monitoring organophosphorus neurotoxins
JF  - Analyica Chimica Acta. 469 (2002), H. 2
Y1  - 2002
SN  - 0378-4304
SP  - 197
EP  - 203
ER  -