TY  - CHAP
A1  - Tippkötter, Nils
A1  - Möhring, Sophie
A1  - Roth, Jasmine
A1  - Wulfhorst, Helene
T1  - Logistics of lignocellulosic feedstocks: preprocessing as a preferable option
T2  - Biorefineries
N2  - In comparison to crude oil, biorefinery raw materials are challenging in concerns of transport and storage. The plant raw materials are more voluminous, so that shredding and compacting usually are necessary before transport. These mechanical processes can have a negative influence on the subsequent biotechnological processing and shelf life of the raw materials. Various approaches and their effects on renewable raw materials are shown. In addition, aspects of decentralized pretreatment steps are discussed. Another important aspect of pretreatment is the varying composition of the raw materials depending on the growth conditions. This problem can be solved with advanced on-site spectrometric analysis of the material.
KW  - Analytics
KW  - Decentral
KW  - Mechanical
KW  - On-site
KW  - Pre-treatment
Y1  - 2019
SN  - 978-3-319-97117-9
SN  - 978-3-319-97119-3
U6  - https://doi.org/10.1007/10_2017_58
N1  - Advances in biochemical engineering/biotechnology ; Vol. 166
SP  - 43
EP  - 68
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Kazuki, Yasuhiro
A1  - Kobayashi, Kaoru
A1  - Hirabayashi, Masumi
A1  - Abe, Satoshi
A1  - Kajitani, Naoyo
A1  - Kazuki, Kanoko
A1  - Takehara, Shoko
A1  - Takiguchi, Masato
A1  - Satoh, Daisuke
A1  - Kuze, Jiro
A1  - Sakuma, Tetsushi
A1  - Kaneko, Takehito
A1  - Mashimo, Tomoji
A1  - Osamura, Minori
A1  - Hashimoto, Mari
A1  - Wakatsuki, Riko
A1  - Hirashima, Rika
A1  - Fujiwara, Ryoichi
A1  - Deguchi, Tsuneo
A1  - Kurihara, Atsushi
A1  - Tsukazaki, Yasuko
A1  - Senda, Naoto
A1  - Yamamoto, Takashi
A1  - Scheer, Nico
A1  - Oshimura, Mitsuo
T1  - Humanized UGT2 and CYP3A transchromosomic rats for improved prediction of human drug metabolism
T2  - PNAS Proceedings of the National Academy of Sciences of the United States of America
Y1  - 2019
U6  - https://doi.org/10.1073/pnas.1808255116
SN  - 1091-6490
VL  - 116
IS  - 8
SP  - 3072
EP  - 3081
ER  - 
TY  - JOUR
A1  - Leschinger, Tim
A1  - Birgel, Stefan
A1  - Hackl, Michael
A1  - Staat, Manfred
A1  - Müller, Lars Peter
A1  - Wegmann, Kilian
T1  - A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair
JF  - Computer Methods in Biomechanics and Biomedical Engineering
Y1  - 2019
U6  - https://doi.org/10.1080/10255842.2019.1572749
IS  - Early view
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Mataré, Victor
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
ED  - Steinbauer, Gerald
ED  - Ferrein, Alexander
T1  - golog++ : An integrative system design
T2  - CogRob 2018. Cognitive Robotics Workshop : Proceedings of the 11th Cognitive Robotics Workshop 2018 co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018) Tempe, AZ, USA, October 27th, 2018
Y1  - 2019
SN  - 1613-0073
SP  - 29
EP  - 35
ER  - 
TY  - JOUR
A1  - Lyons, W. Berry
A1  - Mikucki, Jill A.
A1  - German, Laura A.
A1  - Welch, Kathleen A.
A1  - Welch, Susan A.
A1  - Gardener, Christopher B.
A1  - Tulaczyk, Slawek M.
A1  - Pettit, Erin C.
A1  - Kowalski, Julia
A1  - Dachwald, Bernd
T1  - The Geochemistry of Englacial Brine from Taylor Glacier, Antarctica
JF  - Journal of Geophysical Research: Biogeosciences
Y1  - 2019
U6  - https://doi.org/10.1029/2018JG004411
SN  - 2169-8961
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - JOUR
A1  - Campen, R.
A1  - Kowalski, Julia
A1  - Lyons, W.B.
A1  - Tulaczyk, S.
A1  - Dachwald, Bernd
A1  - Pettit, E.
A1  - Welch, K. A.
A1  - Mikucki, J.A.
T1  - Microbial diversity of an Antarctic subglacial community and high‐resolution replicate sampling inform hydrological connectivity in a polar desert
JF  - Environmental Microbiology
Y1  - 2019
U6  - https://doi.org/10.1111/1462-2920.14607
SN  - 1462-2920
IS  - accepted article
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Vögele, Stefan
A1  - Rübbelke, Dirk
A1  - Govorukha, Kristina
A1  - Grajewski, Matthias
T1  - Socio-technical scenarios for energy-intensive industries: the future of steel production in Germany
JF  - Climatic Change
Y1  - 2019
U6  - https://doi.org/10.1007/s10584-019-02366-0
SN  - 0165-0009
SP  - 1
EP  - 16
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
T1  - Big Data Research - How to Structure the Changes of the Past Decade?
T2  - The Art of Structuring
N2  - In the past decade, many IS researchers focused on researching the phenomenon of Big Data. At the same time, the relevance of data protection gets more attention than ever before. In particular, since the enactment of the European General Data Protection Regulation in May 2018 Information Systems research should provide answers for protecting personal data. The article at hand presents a structuring framework for Big Data research outcome and the consideration of data protection. IS Researchers might use the framework in order to structure Big Data literature and to identify research gaps that should be addressed in the future.
Y1  - 2019
SN  - 978-3-030-06234-7
U6  - https://doi.org/10.1007/978-3-030-06234-7_26
SP  - 271
EP  - 281
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
T1  - Global optimization of continuous-thrust trajectories using evolutionary neurocontrol
T2  - Modeling and Optimization in Space Engineering
N2  - Searching optimal continuous-thrust trajectories is usually a difficult and time-consuming task. The solution quality of traditional optimal-control methods depends strongly on an adequate initial guess because the solution is typically close to the initial guess, which may be far from the (unknown) global optimum. Evolutionary neurocontrol attacks continuous-thrust optimization problems from the perspective of artificial intelligence and machine learning, combining artificial neural networks and evolutionary algorithms. This chapter describes the method and shows some example results for single- and multi-phase continuous-thrust trajectory optimization problems to assess its performance. Evolutionary neurocontrol can explore the trajectory search space more exhaustively than a human expert can do with traditional optimal-control methods. Especially for difficult problems, it usually finds solutions that are closer to the global optimum. Another fundamental advantage is that continuous-thrust trajectories can be optimized without an initial guess and without expert supervision.
Y1  - 2019
SN  - 978-3-030-10501-3
SN  - 978-3-030-10500-6
U6  - https://doi.org/10.1007/978-3-030-10501-3_2
N1  - Springer Optimization and Its Applications, vol 144
gedruckt unter der Signatur 21 ZSS 46 in der Bereichsbibliothek Eupener Str. vorhanden
SP  - 33
EP  - 57
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Siebigteroth, Ines
A1  - Zündorf, Albert
T1  - Schema Matching with Frequent Changes on Semi-Structured Input Files: A Machine Learning Approach on Biological Product Data
T2  - Proceedings of the 21st International Conference on Enterprise Information Systems - Volume 1: ICEIS
Y1  - 2019
SN  - 978-989-758-372-8
U6  - https://doi.org/10.5220/0007723602080215
SP  - 208
EP  - 215
ER  - 
TY  - JOUR
A1  - Kapelyukh, Yury
A1  - Henderson, Colin James
A1  - Scheer, Nico
A1  - Rode, Anja
A1  - Wolf, Charles Roland
T1  - Defining the contribution of CYP1A1 and CYP1A2 to drug metabolism using humanized CYP1A1/1A2 and Cyp1a1/Cyp1a2 KO mice
JF  - Drug Metabolism and Disposition
Y1  - 2019
U6  - https://doi.org/10.1124/dmd.119.087718
IS  - Early view
ER  - 
TY  - BOOK
A1  - Wagemann, Kurt
A1  - Tippkötter, Nils
T1  - Biorefineries / Kurt Wagemann, Nils Tippkötter (editors)
T3  - Advances in biochemical engineering/biotechnology book series (ABE)
Y1  - 2019
SN  - 978-3-319-97117-9
SN  - 978-3-319-97119-3
U6  - https://doi.org/10.1007/978-3-319-97119-3
PB  - Springer
CY  - Cham (Switzerland)
ER  - 
TY  - JOUR
A1  - Morais, Paulo V.
A1  - Silva, Anielle C. A.
A1  - Dantas, Noelio O.
A1  - Schöning, Michael Josef
A1  - Siqueira, José R., Jr.
T1  - Hybrid Layer‐by‐Layer Film of Polyelectrolytes‐Embedded Catalytic CoFe2O4 Nanocrystals as Sensing Units in Capacitive Electrolyte‐Insulator‐Semiconductor Devices
JF  - physica status solidi a : applications and materials sciences
Y1  - 2019
U6  - https://doi.org/10.1002/pssa.201900044
VL  - 216
IS  - 1900044
SP  - 1
EP  - 9
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Rietsch, Stefan H. G.
A1  - Brunheim, Sascha
A1  - Orzada, Stephan
A1  - Voelker, Maximilian N.
A1  - Maderwald, Stefan
A1  - Bitz, Andreas
A1  - Gratz, Marcel
A1  - Ladd, Mark E.
A1  - Quick, Harald H.
T1  - Development and evaluation of a 16-channel receive-only RF coil to improve 7T ultra-high field body MRI with focus on the spine
JF  - Magnetic Resonance in Medicine
Y1  - 2019
U6  - https://doi.org/10.1002/mrm.27731
SN  - 1522-2594
IS  - Early view
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Albanna, Walid
A1  - Lüke, Jan Niklas
A1  - Schubert, Gerrit Alexander
A1  - Dibué-Adjei, Maxine
A1  - Kotliar, Konstantin
A1  - Hescheler, Jürgen
A1  - Clusmann, Hans
A1  - Steiger, Hans-Jakob
A1  - Hänggi, Daniel
A1  - Kamp, Marcel A.
A1  - Schneider, Toni
A1  - Neumaier, Felix
T1  - Modulation of Ca v 2.3 channels by unconjugated bilirubin (UCB) – Candidate mechanism for UCB-induced neuromodulation and neurotoxicity
JF  - Molecular and Cellular Neuroscience
Y1  - 2019
U6  - https://doi.org/10.1016/j.mcn.2019.03.003
SN  - 1044-7431
VL  - 96
IS  - 4
SP  - 35
EP  - 46
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Meyer, Carolin
A1  - Gaalen, Kerstin van
A1  - Leschinger, Tim
A1  - Scheyerer, Max J.
A1  - Neiss, Wolfram F.
A1  - Staat, Manfred
A1  - Müller, Lars P.
A1  - Wegmann, Kilian
T1  - Kyphoplasty of Osteoporotic Fractured Vertebrae: A Finite Element Analysis about Two Types of Cement
JF  - BioMed Research International
Y1  - 2019
U6  - https://doi.org/10.1155/2019/9232813
SP  - Article ID 9232813
ER  - 
TY  - JOUR
A1  - Jan Thimo, Grundmann
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Boden, Ralf
A1  - Ceriotti, Matteo
A1  - Cordero, Federico
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Hercik, David
T1  - Capabilities of Gossamer-1 derived small spacecraft solar sails carrying Mascot-derived nanolanders for in-situ surveying of NEAs
JF  - Acta Astronautica
Y1  - 2019
U6  - https://doi.org/10.1016/j.actaastro.2018.03.019
SN  - 0094-5765
VL  - 156
IS  - 3
SP  - 330
EP  - 362
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Scheer, Nico
A1  - Henderson, Colin James
A1  - Kapelyukh, Yury
A1  - Rode, Anja
A1  - Mclaren, Aileen W.
A1  - MacLeod, Alastair Kenneth
A1  - Lin, De
A1  - Wright, Jayne
A1  - Stanley, Lesley
A1  - Wolf, C. Roland
T1  - An extensively humanised mouse model to predict pathways of drug disposition, drug/drug interactions, and to facilitate the design of clinical trials
JF  - Drug Metabolism and Disposition
Y1  - 2019
U6  - https://doi.org/10.1124/dmd.119.086397
IS  - Early view
ER  - 
TY  - JOUR
A1  - Jung, Alexander
A1  - Müller, Wolfram
A1  - Staat, Manfred
T1  - Optimization of the flight technique in ski jumping: the influence of wind
Y1  - 2019
U6  - https://doi.org/10.1016/j.jbiomech.2019.03.023
IS  - Early view
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Breuer, Lars
A1  - Pilas, Johanna
A1  - Guthmann, Eric
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Towards light-addressable flow control: responsive hydrogels with incorporated graphene oxide as laser-driven actuator structures within microfluidic channels
JF  - Sensor and Actuators B: Chemical
Y1  - 2019
U6  - https://doi.org/10.1016/j.snb.2019.02.086
SN  - 0925-4005
VL  - 288
SP  - 579
EP  - 585
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - An overview on dry low NOx micromix combustor development for hydrogen-rich gas turbine applications
JF  - International Journal of Hydrogen Energy
Y1  - 2019
U6  - https://doi.org/10.1016/j.ijhydene.2019.01.161
SN  - 0360-3199
VL  - 44
IS  - 13
SP  - 6978
EP  - 6990
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Franzen, Julian
A1  - Stecken, Jannis
A1  - Pfaff, Raphael
A1  - Kuhlenkötter, Bernd
T1  - Using the Digital Shadow for a Prescriptive Optimization of Maintenance and Operation : The Locomotive in the Context of the Cyber-Physical System
T2  - Advances in Production, Logistics and Traffic
N2  - In competition with other modes of transport, rail freight transport is looking for solutions to become more attractive. Short-term success can be achieved through the data-driven optimization of operations and maintenance as well as the application of novel strategies such as prescriptive maintenance. After introducing the concept of prescriptive maintenance, this paper aims to prove that vehicle-focused applications of this approach indeed have the potential to increase attractiveness. However, even greater advantages can be activated if data from the horizontal network of the vehicle is available. Drawing on the state of the art in research and technology in the field of cyber-physical systems (CPS) as well as digital twins and shadows, our work serves to design a system of systems for the horizontal interconnection of a rail vehicle and to conceptualize a draft for a digital twin of a locomotive.
Y1  - 2019
SN  - 978-3-030-13535-5
U6  - https://doi.org/10.1007/978-3-030-13535-5_19
SP  - 265
EP  - 276
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Cornelis, Peter
A1  - Givanoudi, Stella
A1  - Yongabi, Derick
A1  - Iken, Heiko
A1  - Duwé, Sam
A1  - Deschaume, Olivier
A1  - Robbens, Johan
A1  - Dedecker, Peter
A1  - Bartic, Carmen
A1  - Wübbenhorst, Michael
A1  - Schöning, Michael Josef
A1  - Heyndrickx, Marc
A1  - Wagner, Patrick
T1  - Sensitive and specific detection of E. coli using biomimetic receptors in combination with a modified heat-transfer method
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - https://doi.org/10.1016/j.bios.2019.04.026
SN  - 0956-5663
VL  - 136
SP  - 97
EP  - 105
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Geissler, Hanno
A1  - Schöning, Michael Josef
T1  - Rapid methods and sensors for milk quality monitoring and spoilage detection
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - https://doi.org/10.1016/j.bios.2019.04.040
SN  - 0956-5663
VL  - 140
IS  - Article 111272
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - BOOK
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Hinzen, Klaus-G.
A1  - Höffer, Rüdiger
T1  - Structural Dynamics with Applications in Earthquake and Wind Engineering
Y1  - 2019
SN  - 978-3-662-57550-5
U6  - https://doi.org/10.1007/978-3-662-57550-5
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Hinzen, Klaus-G.
A1  - Höffer, Rüdiger
T1  - Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.
KW  - Wind turbulence
KW  - Gust wind response
KW  - Spectral analysis
Y1  - 2019
SN  - 978-3-662-57550-5 (Online)
SN  - 978-3-662-57548-2 (Print)
U6  - https://doi.org/10.1007/978-3-662-57550-5_3
SP  - 153
EP  - 196
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
A1  - Oertel, Mario
T1  - Wave breaking over a submerged horizontal plate: Optical Flow, LES and RANS
T2  - E-proceedings of the 38th IAHR World Congress  September 1-6, 2019, Panama City, Panama
Y1  - 2019
U6  - https://doi.org/10.3850/38WC092019-0509
SP  - 3690
EP  - 3698
ER  - 
TY  - CHAP
A1  - Braun, Sebastian
A1  - Cheng, Chi-Tsun
A1  - Lai, Chow Yin
A1  - Wollert, Jörg
T1  - Microservice Architecture for Automation - Realization by the example of a model-factory’s manufacturing execution system
T2  - Proceedings of the 23rd World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI 2019
Y1  - 2019
SP  - 33
EP  - 37
ER  - 
TY  - JOUR
A1  - Limpert, Nicolas
A1  - Wiesen, Patrick
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Schiffer, Stefan
T1  - The ROSIN Project and its Outreach to South Africa
JF  - R&D Journal
Y1  - 2019
VL  - 35
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - Development and Testing of a FuelFlex Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications With Variable Hydrogen Methane Mixtures
T2  - ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition.  June 17–21, 2019 Phoenix, Arizona, USA. Volume 4A: Combustion, Fuels, and Emissions
Y1  - 2019
SN  - 978-0-7918-5861-5
U6  - https://doi.org/10.1115/GT2019-90095
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Uto, Takahiro
A1  - Uchiyama, Yuta
A1  - Wirsum, Manfred
A1  - Funke, Harald
A1  - Kusterer, Karsten
T1  - Application of Low NOx Micro-mix Hydrogen Combustion to 2MW Class Industrial Gas Turbine Combustor
T2  - Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan
Y1  - 2019
SN  - 978-4-89111-010-9
N1  - IGTC-2019-129
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
T1  - Flexible Fuel Operation of a Dry-Low-Nox Micromix Combustor with Variable Hydrogen Methane Mixtures
T2  - Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan
Y1  - 2019
SN  - 978-4-89111-010-9
N1  - IGTC-2019-013
ER  - 
TY  - JOUR
A1  - Slabu, Ioana
A1  - Roeth, Anjali A.
A1  - Engelmann, Ulrich M.
A1  - Wiekhorst, Frank
A1  - Buhl, Eva M.
A1  - Neumann, Ulf P.
A1  - Schmitz-Rode, Thomas
T1  - Modeling of magnetoliposome uptake in human pancreatic tumor cells in vitro
JF  - Nanotechnology
Y1  - 2019
U6  - https://doi.org/10.1088/1361-6528/ab033e
SN  - 1361-6528
VL  - 30
IS  - 18
SP  - 184004
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Shasha, Carolyn
A1  - Teeman, Eric
A1  - Slabu, Iona
A1  - Krishnan, Kannan M.
T1  - Predicting size-dependent heating efficiency of magnetic nanoparticles from experiment and stochastic Néel-Brown Langevin simulation
JF  - Journal of Magnetism and Magnetic Materials
Y1  - 2019
U6  - https://doi.org/10.1016/j.jmmm.2018.09.041
SN  - 0304-8853
VL  - 471
IS  - 1
SP  - 450
EP  - 456
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Seifert, Julian
A1  - Mues, Benedikt
A1  - Roitsch, Stefan
A1  - Ménager, Christine
A1  - Schmidt, Annette M.
A1  - Slabu, Ioana
T1  - Heating efficiency of magnetic nanoparticles decreases with gradual immobilization in hydrogels
JF  - Journal of Magnetism and Magnetic Materials
Y1  - 2019
U6  - https://doi.org/10.1016/j.jmmm.2018.09.113
SN  - 0304-8853
VL  - 471
IS  - 1
SP  - 486
EP  - 494
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Dantism, Shahriar
A1  - Röhlen, Desiree
A1  - Wagner, Torsten
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - A LAPS-based differential sensor for parallelized metabolism monitoring of various bacteria
JF  - Sensors
N2  - Monitoring the cellular metabolism of bacteria in (bio)fermentation processes is crucial to control and steer them, and to prevent undesired disturbances linked to metabolically inactive microorganisms. In this context, cell-based biosensors can play an important role to improve the quality and increase the yield of such processes. This work describes the simultaneous analysis of the metabolic behavior of three different types of bacteria by means of a differential light-addressable potentiometric sensor (LAPS) set-up. The study includes Lactobacillus brevis, Corynebacterium glutamicum, and Escherichia coli, which are often applied in fermentation processes in bioreactors. Differential measurements were carried out to compensate undesirable influences such as sensor signal drift, and pH value variation during the measurements. Furthermore, calibration curves of the cellular metabolism were established as a function of the glucose concentration or cell number variation with all three model microorganisms. In this context, simultaneous (bio)sensing with the multi-organism LAPS-based set-up can open new possibilities for a cost-effective, rapid detection of the extracellular acidification of bacteria on a single sensor chip. It can be applied to evaluate the metabolic response of bacteria populations in a (bio)fermentation process, for instance, in the biogas fermentation process.
Y1  - 2019
U6  - https://doi.org/10.3390/s19214692
SN  - 1424-8220
VL  - 19
IS  - 21
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Karschuck, T. L.
A1  - Filipov, Y.
A1  - Bollella, P.
A1  - Schöning, Michael Josef
A1  - Katz, E.
T1  - Not-XOR (NXOR) logic gate based on an enzyme-catalyzed reaction
JF  - International Journal of Unconventional Computing
N2  - Enzyme-catalyzed reactions have been designed to mimic various Boolean logic gates in the general framework of unconventional biomolecular computing. While some of the logic gates, particularly OR, AND, are easy to realize with biocatalytic reactions and have been reported in numerous publications, some other, like NXOR, are very challenging and have not been realized yet with enzyme reactions. The paper reports on a novel approach to mimicking the NXOR logic gate using the bell-shaped enzyme activity dependent on pH values. Shifting pH from the optimum value to the acidic or basic values by using acid or base inputs (meaning 1,0 and 0,1 inputs) inhibits the enzyme reaction, while keeping the optimum pH (assuming 0,0 and 1,1 input combinations) preserves a high enzyme activity. The challenging part of the present approach is the selection of an enzyme with a well-demonstrated bell-shape activity dependence on the pH value. While many enzymes can satisfy this condition, we selected pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase as this enzyme has the optimum pH center-located on the pH scale allowing the enzyme activity change by the acidic and basic pH shift from the optimum value corresponding to the highest activity. The present NXOR gate is added to the biomolecular “toolbox” as a new example of Boolean logic gates based on enzyme reactions.
Y1  - 2019
SN  - 1548-7199
VL  - 14
IS  - 3-4
SP  - 235
EP  - 242
PB  - Old City Publishing
CY  - Philadelphia
ER  - 
TY  - THES
A1  - Engelmann, Ulrich M.
T1  - Assessing magnetic fluid hyperthermia : magnetic relaxation simulation, modeling of nanoparticle uptake inside pancreatic tumor cells and in vitro efficacy
Y1  - 2019
SN  - 978-3-945954-58-4
N1  - Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2019
PB  - Infinite Science Publishing
CY  - Lübeck
ER  - 
TY  - JOUR
A1  - Finger, Felix
A1  - Bil, Cees
A1  - Braun, Carsten
T1  - Initial Sizing Methodology for Hybrid-Electric General Aviation Aircraft
JF  - Journal of Aircraft
Y1  - 2019
U6  - https://doi.org/10.2514/1.C035428
SN  - 1533-3868
VL  - 57
IS  - 2
SP  - 245
EP  - 255
ER  - 
TY  - CHAP
A1  - Luft, Angela
A1  - Gebhardt, Andreas
A1  - Balc, Nicolae
T1  - Challenges of additive manufacturing in production systems
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - https://doi.org/10.1051/matecconf/201929901003
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01003
ER  - 
TY  - CHAP
A1  - Abbas, Karim
A1  - Thurn, Laura
A1  - Kessler, Julia
A1  - Eichler, Fabian
T1  - Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - https://doi.org/10.1051/matecconf/201929901009
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01009
ER  - 
TY  - CHAP
A1  - Eichler, Fabian
A1  - Skupin, Marco
A1  - Thurn, Laura
A1  - Kasch, Susanne
A1  - Schmidt, Thomas
T1  - Operating limits for beam melting of glass materials
T2  - Modern Technologies in Manufacturing (MTeM 2019)
N2  - Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.
Y1  - 2019
U6  - https://doi.org/10.1051/matecconf/201929901004
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01004
ER  - 
TY  - CHAP
A1  - Baader, Fabian
A1  - Keller, Denis
A1  - Lehmann, Raphael
A1  - Gerber, Lukas
A1  - Reiswich, Martin
A1  - Dachwald, Bernd
A1  - Förstner, Roger
T1  - Operating melting probes for ice penetration under sublimation  conditions and in reduced gravity on a sounding rocket
T2  - Proceedings of the 24th ESA Symposium on European Rocket and Balloon Programmes and related Research
Y1  - 2019
SN  - 0379-6566
N1  - 24th PAC Symposium 2019
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Propulsion Technology Levels on the Sizing and Energy Consumption for Serial HybridElectric General Aviation Aircraft
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Rings, René
A1  - Ludowicy, Jonas
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Sensitivity Analysis of General Aviation Aircraft with Parallel Hybrid-Electric Propulsion Systems
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Gerhards, Benjamin
A1  - Schleser, Markus
A1  - Otten,, Christian
A1  - Schwarz, Alexander
A1  - Gebhardt, Andreas
T1  - Innovative Laser Beam Joining Technology for Additive Manufactured Parts
T2  - Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava
Y1  - 2019
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Gerhards, Benjamin
A1  - Schleser, Markus
A1  - Otten, Christian
T1  - Advancements of mobile vacuum laser welding for industrial thick sheet applications
T2  - Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava
Y1  - 2019
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Kramer, Matthias
A1  - Bung, Daniel Bernhard
A1  - Chanson, Hubert
T1  - A stochastic bubble generator for air-water flow research
T2  - E-proceedings of the 38th IAHR World Congress, September 1-6, 2019, Panama City, Panama
Y1  - 2019
U6  - https://doi.org/10.3850/38WC092019-0909
SP  - 5714
EP  - 5721
ER  - 
TY  - CHAP
A1  - Tullis, Blake P.
A1  - Crookston, Brian M.
A1  - Bung, Daniel Bernhard
T1  - Weir head-discharge relationships: A multi-lab exercise
T2  - E-proceedings of the 38th IAHR World Congress  September 1-6, 2019, Panama City, Panama
Y1  - 2019
SP  - 1
EP  - 15
ER  - 
TY  - JOUR
A1  - Engel, Mareike
A1  - Gemünde, Andre
A1  - Holtmann, Dirk
A1  - Müller-Renno, Christine
A1  - Ziegler, Christiane
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Clostridium acetobutylicum’s connecting world: cell appendage formation in bioelectrochemical systems
JF  - ChemElectroChem
N2  - Bacterial cell appendix formation supports cell-cell interaction, cell adhesion and cell movement. Additionally, in bioelectrochemical systems (BES), cell appendages have been shown to participate in extracellular electron transfer. In this work, the cell appendix formation of Clostridium acetobutylicum in biofilms of a BES are imaged and compared with conventional biofilms. Under all observed conditions, the cells possess filamentous appendages with a higher number and density in the BES. Differences in the amount of extracellular polymeric substance in the biofilms of the electrodes lead to the conclusion that the cathode can be used as electron donor and the anode as electron acceptor by C. acetobutylicum. When using conductive atomic force microscopy, a current response of about 15 nA is found for the cell appendages from the BES. This is the first report of conductivity for clostridial cell appendices and represents the basis for further studies on their role for biofilm formation and electron transfer.
Y1  - 2019
U6  - https://doi.org/10.1002/celc.201901656
SN  - 2196-0216
VL  - 7
IS  - 2
SP  - 414
EP  - 420
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Bil, C.
T1  - On Aircraft Design Under the Consideration of Hybrid-Electric Propulsion Systems
T2  - APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)
N2  - A hybrid-electric propulsion system combines the advantages of fuel-based systems and battery powered systems and offers new design freedom. To take full advantage of this technology, aircraft designers must be aware of its key differences, compared to conventional, carbon-fuel based, propulsion systems. This paper gives an overview of the challenges and potential benefits associated with the design of aircraft that use hybrid-electric propulsion systems. It offers an introduction of the most popular hybrid-electric propulsion architectures and critically assess them against the conventional and fully electric propulsion configurations. The effects on operational aspects and design aspects are covered. Special consideration is given to the application of hybrid-electric propulsion technology to both unmanned and vertical take-off and landing aircraft. The authors conclude that electric propulsion technology has the potential to revolutionize aircraft design. However, new and innovative methods must be researched, to realize the full benefit of the technology.
KW  - Hybrid-electric aircraft
KW  - Aircraft design
KW  - Design rules
KW  - Green aircraft
Y1  - 2019
SN  - 978-981-13-3305-7
U6  - https://doi.org/10.1007/978-981-13-3305-7_99
N1  - APISAT 2018 - Asia-Pacific International Symposium on Aerospace Technology. 16-18 October 2018. Chengdu, China.

Lecture Notes in Electrical Engineering (LNEE, volume 459)
SP  - 1261
EP  - 1272
PB  - Springer
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Havermann, Marc
A1  - Bil, C.
A1  - Gomez, F.
T1  - Empirical Correlations for Geometry Build-Up of Fixed Wing Unmanned Air Vehicles
T2  - APISAT 2018: The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018)
N2  - The results of a statistical investigation of 42 fixed-wing, small to medium sized (20 kg−1000 kg) reconnaissance unmanned air vehicles (UAVs) are presented. Regression analyses are used to identify correlations of the most relevant geometry dimensions with the UAV’s maximum take-off mass. The findings allow an empirical based geometry-build up for a complete unmanned aircraft by referring to its take-off mass only. This provides a bridge between very early design stages (initial sizing) and the later determination of shapes and dimensions. The correlations might be integrated into a UAV sizing environment and allow designers to implement more sophisticated drag and weight estimation methods in this process. Additional information on correlation factors for a rough drag estimation methodology indicate how this technique can significantly enhance the accuracy of early design iterations.
KW  - Unmanned Air Vehicle
KW  - Geometry
KW  - Correlations
KW  - Statistics
KW  - Drag
Y1  - 2019
SN  - 978-981-13-3305-7
U6  - https://doi.org/10.1007/978-981-13-3305-7_109
N1  - APISAT 2018 - Asia-Pacific International Symposium on Aerospace Technology. 16-18 October 2018. Chengdu, China.


Lecture Notes in Electrical Engineering (LNEE, volume 459)
SP  - 1365
EP  - 1381
PB  - Springer
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Holtschoppen, Britta
T1  - Seismic design of structures and components in industrial units
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - Industrial units consist of the primary load-carrying structure and various process engineering components, the latter being by far the most important in financial terms. In addition, supply structures such as free-standing tanks and silos are usually required for each plant to ensure the supply of material and product storage. Thus, for the earthquake-proof design of industrial plants, design and construction rules are required for the primary structures, the secondary structures and the supply structures. Within the framework of these rules, possible interactions of primary and secondary structures must also be taken into account. Importance factors are used in seismic design in order to take into account the usually higher risk potential of an industrial unit compared to conventional building structures. Industrial facilities must be able to withstand seismic actions because of possibly wide-ranging damage consequences in addition to losses due to production standstill and the destruction of valuable equipment. The chapter presents an integrated concept for the seismic design of industrial units based on current seismic standards and the latest research results. Special attention is devoted to the seismic design of steel thin-walled silos and tank structures.
KW  - Industrial units
KW  - Seismic design
KW  - Tanks
KW  - Silos
KW  - Components
Y1  - 2019
SN  - 978-3-662-57550-5
U6  - https://doi.org/10.1007/978-3-662-57550-5_5
SP  - 359
EP  - 481
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
T1  - Earthquake resistant design of structures according to Eurocode 8
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - The chapter initially provides a summary of the contents of Eurocode 8, its aim being to offer both to the students and to practising engineers an easy introduction into the calculation and dimensioning procedures of this earthquake code. Specifically, the general rules for earthquake-resistant structures, the definition of design response spectra taking behaviour and importance factors into account, the application of linear and non-linear calculation methods and the structural safety verifications at the serviceability and ultimate limit state are presented. The application of linear and non-linear calculation methods and corresponding seismic design rules is demonstrated on practical examples for reinforced concrete, steel and masonry buildings. Furthermore, the seismic assessment of existing buildings is discussed and illustrated on the example of a typical historical masonry building in Italy. The examples are worked out in detail and each step of the design process, from the preliminary analysis to the final design, is explained in detail.
KW  - Seismic design
KW  - Eurocode 8
KW  - Design examples
KW  - Response spectrum
KW  - Pushover analysis
Y1  - 2019
SN  - 978-3-662-57550-5 (Online)
SN  - 978-3-662-57548-2 (Print)
U6  - https://doi.org/10.1007/978-3-662-57550-5_4
SP  - 197
EP  - 358
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Chavez Bermudez, Victor Francisco
A1  - Wollert, Jörg
T1  - Gateway for Automation Controllers and Cloud based Voice Recognition Services
T2  - KommA, 10. Jahreskolloquium Kommunikation in der Automation
Y1  - 2019
SN  - 978-3-944722-85-6
SP  - 1
EP  - 8
PB  - Institut für Automation und Kommunikation
CY  - Magdeburg
ER  - 
TY  - JOUR
A1  - Rossi, Leonardo
A1  - Stupazzini, Marco
A1  - Parisi, Davide
A1  - Holtschoppen, Britta
A1  - Ruggieri, Gabriella
A1  - Butenweg, Christoph
T1  - Empirical fragility functions and loss curves for long-span-beam buildings based on the 2012 Emilia-Romagna earthquake official database
JF  - Bulletin of Earthquake Engineering
N2  - The 2012 Emilia-Romagna earthquake, that mainly struck the homonymous Italian region provoking 28 casualties and damage to thousands of structures and infrastructures, is an exceptional source of information to question, investigate, and challenge the validity of seismic fragility functions and loss curves from an empirical standpoint. Among the most recent seismic events taking place in Europe, that of Emilia-Romagna is quite likely one of the best documented, not only in terms of experienced damages, but also for what concerns occurred losses and necessary reconstruction costs. In fact, in order to manage the compensations in a fair way both to citizens and business owners, soon after the seismic sequence, the regional administrative authority started (1) collecting damage and consequence-related data, (2) evaluating information sources and (3) taking care of the cross-checking of various reports. A specific database—so-called Sistema Informativo Gestione Europa (SFINGE)—was devoted to damaged business activities. As a result, 7 years after the seismic events, scientists can rely on a one-of-a-kind, vast and consistent database, containing information about (among other things): (1) buildings’ location and dimensions, (2) occurred structural damages, (3) experienced direct economic losses and (4) related reconstruction costs. The present work is focused on a specific data subset of SFINGE, whose elements are Long-Span-Beam buildings (mostly precast) deployed for business activities in industry, trade or agriculture. With the available set of data, empirical fragility functions, cost and loss ratio curves are elaborated, that may be included within existing Performance Based Earthquake Engineering assessment toolkits.
KW  - Empirical fragility functions
KW  - Empirical consequence curves
KW  - Precast buildings
KW  - Emilia-Romagna earthquake
KW  - PBEE
Y1  - 2019
U6  - https://doi.org/10.1007/s10518-019-00759-1
SN  - 1573-1456
VL  - 18
SP  - 1693
EP  - 1721
PB  - Springer Nature
ER  - 
TY  - JOUR
A1  - Rossi, Leonardo
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
T1  - Official data on the economic consequences of the 2012 Emilia-Romagna earthquake: a first analysis of database SFINGE
JF  - Bulletin of Earthquake Engineering
Y1  - 2019
U6  - https://doi.org/10.1007%2Fs10518-019-00655-8
VL  - 17
IS  - 9
SP  - 4855
EP  - 4884
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames
JF  - Engineering Structures
Y1  - 2019
U6  - https://doi.org/10.1016/j.engstruct.2019.109435
SN  - 0141-0296
VL  - 197
IS  - Article 109435
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
A1  - Salatic, Ratko
T1  - Experimental results of reinforced concrete frames with masonry infills under combined quasi-static in-plane and out-of-plane seismic loading
JF  - Bulletin of Earthquake Engineering
Y1  - 2019
U6  - https://doi.org/10.1007/s10518-019-00602-7
SN  - 1573-1456
VL  - 17
SP  - 3397
EP  - 3422
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Rossi, Leonardo
A1  - Parisi, Davide
A1  - Casari, Chiara
A1  - Montanari, Luca
A1  - Ruggieri, Gabriella
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
T1  - Empirical Data about Direct Economic Consequences of Emilia-Romagna 2012 Earthquake on Long-Span-Beam Buildings
JF  - Earthquake Spectra
Y1  - 2019
U6  - https://doi.org/10.1193/100118EQS224DP
SN  - 1944-8201
VL  - 35
IS  - 4
SP  - 1979
EP  - 2001
ER  - 
TY  - CHAP
A1  - Hofmann, Till
A1  - Limpert, Nicolas
A1  - Mataré, Victor
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Winning the RoboCup Logistics League with Fast Navigation, Precise Manipulation, and Robust Goal Reasoning
T2  - RoboCup 2019: Robot World Cup XXIII. RoboCup
Y1  - 2019
SN  - 978-3-030-35699-6
U6  - https://doi.org/10.1007/978-3-030-35699-6_41
N1  - Lecture Notes in Computer Science, vol 11531
SP  - 504
EP  - 516
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
A1  - Hoetter, Jan-Steffen
T1  - Rapid Tooling
T2  - CIRP Encyclopedia of Production Engineering
Y1  - 2019
SN  - 978-3-662-53120-4
U6  - https://doi.org/10.1007/978-3-662-53120-4
SP  - 39
EP  - 52
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - JOUR
A1  - Valero, Daniel
A1  - Viti, Nicolo
A1  - Gualtieri, Carlo
T1  - Numerical Simulation of Hydraulic Jumps. Part 1: Experimental Data for Modelling Performance Assessment
JF  - Water
Y1  - 2019
U6  - https://doi.org/10.3390/w11010036
SN  - 2073-4441
VL  - 11
IS  - 1
SP  - Art. Nr. 36
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Viti, Nicolo
A1  - Valero, Daniel
A1  - Gualtieri, Carlo
T1  - Numerical Simulation of Hydraulic Jumps. Part 2: Recent Results and Future Outlook
JF  - Water
Y1  - 2019
U6  - https://doi.org/10.3390/w11010028
SN  - 2073-4441
VL  - 11
IS  - 1
SP  - Art. Nr. 28
ER  - 
TY  - JOUR
A1  - Bleilevens, Christian
A1  - Hill, Aileen
A1  - Grzanna, Tim
A1  - Fechter, Tamara
A1  - Bohnen, Melanie
A1  - Weber, Hans-Joachim
A1  - Beckers, Christian
A1  - Borosch, Sebastian
A1  - Zayat, Rashad
A1  - Benstoem, Carin
A1  - Rossaint, Rolf
A1  - Goetzenich, Andreas
T1  - In vitro head-to-head comparison of anticoagulation properties of two heparin brands in a human blood miniature mock loop
JF  - Interactive cardiovascular and thoracic surgery
Y1  - 2019
U6  - https://doi.org/10.1093/icvts/ivy206
SN  - 1569-9285
VL  - 28
IS  - 1
SP  - 120
EP  - 127
ER  - 
TY  - CHAP
A1  - Scholl, Ingrid
A1  - Bartella, Alex
A1  - Moluluo, Cem
A1  - Ertural, Berat
A1  - Laing, Frederic
A1  - Suder, Sebastian
T1  - MedicVR : Acceleration and Enhancement Techniques for Direct Volume Rendering in Virtual Reality
T2  - Bildverarbeitung für die Medizin 2019 : Algorithmen – Systeme – Anwendungen
Y1  - 2019
SN  - 978-3-658-25326-4
U6  - https://doi.org/10.1007/978-3-658-25326-4_32
SP  - 152
EP  - 157
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Dotzauer, Martin
A1  - Pfeiffer, Diana
A1  - Lauer, Markus
A1  - Pohl, Marcel
A1  - Mauky, Eric
A1  - Bär, Katharina
A1  - Sonnleitner, Matthias
A1  - Zörner, Wilfried
A1  - Hudde, Jessica
A1  - Schwarz, Björn
A1  - Faßauer, Burkhardt
A1  - Dahmen, Markus
A1  - Rieke, Christian
A1  - Herbert, Johannes
A1  - Thrän, Daniela
T1  - How to measure flexibility – Performance indicators for demand driven power generation from biogas plants
JF  - Renewable Energy
Y1  - 2019
U6  - https://doi.org/10.1016/j.renene.2018.10.021
SN  - 0960-1481
SP  - 135
EP  - 146
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Hüning, Felix
A1  - Hillgärtner, Michael
A1  - Reke, Michael
T1  - Rolling Labs – Teaching Vehicle Electronics from the Beginning
JF  - International Journal of Engineering Pedagogy (iJEP)
Y1  - 2019
U6  - https://doi.org/10.3991/ijep.v9i1.9241
SN  - 2192-4880
VL  - 9
IS  - 1
SP  - 34
EP  - 49
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Efficient Hashing Algorithm for NN Problem in HD Spaces
T2  - Lecture Notes in Computer Science
Y1  - 2019
SN  - 978-303005498-4
U6  - https://doi.org/10.1007/978-3-030-05499-1_6
N1  - 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018; Funchal; Portugal; 16 January 2018 through 18 January 2018; Code 222779
SP  - 101
EP  - 115
ER  - 
TY  - JOUR
A1  - Jung, Alexander
A1  - Staat, Manfred
T1  - Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue
JF  - GAMM - Mitteilungen der Gesellschaft für Angewandte Mathematik und Mechanik
Y1  - 2019
U6  - https://doi.org/10.1002/gamm.201900002
SN  - 1522-2608
VL  - 42
IS  - 4
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Arreola, Julio
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Toward an immobilization method for spore-based biosensors in oxidative environment
JF  - Electrochimica Acta
Y1  - 2019
U6  - https://doi.org/10.1016/j.electacta.2019.01.148
VL  - 302
SP  - 394
EP  - 401
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Abanteriba, Sylvester
T1  - Numerical and Experimental Evaluation of a Dual-Fuel Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications
JF  - Journal of Thermal Science and Engineering Applications
Y1  - 2019
U6  - https://doi.org/10.1115/1.4041495
SN  - 19485085
N1  - Paper No: GT2017-64795
VL  - 11
IS  - 1
SP  - 011015
PB  - ASME
CY  - New York
ER  - 
TY  - JOUR
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Jessing, Max P.
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Surface regeneration and reusability of label-free DNA biosensors based on weak polyelectrolyte-modified capacitive field-effect structures
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - https://doi.org/10.1016/j.bios.2018.11.019
SN  - 0956-5663
VL  - 126
SP  - 510
EP  - 517
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Panc, Nicolae
A1  - Contiu, Glad
A1  - Bocanet, Vlad
A1  - Thurn, Laura
A1  - Sabau, Emilia
T1  - The influence of cutting technology on surface wear hardness
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 3
SP  - 205
EP  - 210
ER  - 
TY  - CHAP
A1  - Rao, Deepak
A1  - Pathrose, Plato
A1  - Hüning, Felix
A1  - Sid, Jithin
T1  - An Approach for Validating Safety of Perception Software in Autonomous Driving Systems
T2  - Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16–18, 2019, Proceedings
N2  - The increasing complexity of Advanced Driver Assistance Systems (ADAS) presents a challenging task to validate safe and reliable performance of these systems under varied conditions. The test and validation of ADAS/AD with real test drives, although important, involves huge costs and time. Simulation tools provide an alternative with the added advantage of reproducibility but often use ideal sensors, which do not reflect real sensor output accurately. This paper presents a new validation methodology using fault injection, as recommended by the ISO 26262 standard, to test software and system robustness. In our work, we investigated and developed a tool capable of inserting faults at different software and system levels to verify its robustness. The scope of this paper is to cover the fault injection test for the Visteon’s DriveCore™ system, a centralized domain controller for Autonomous driving which is sensor agnostic and SoC agnostic. With this new approach, the validation of safety monitoring functionality and its behavior can be tested using real-world data instead of synthetic data from simulation tools resulting in having better confidence in system performance before proceeding with in-vehicle testing.
KW  - Advanced driver assistance systems (ADAS/AD)
KW  - ISO 26262
KW  - Safety-critical systems validation
KW  - Safety of the intended functionality (SOTIF)
Y1  - 2019
SN  - 978-3-030-32872-6
U6  - https://doi.org/10.1007/978-3-030-32872-6_20
SP  - 303
EP  - 316
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Schieren, Mark
A1  - Kleinschmidt, Joris
A1  - Schmutz, Axel
A1  - Loop, Torsten
A1  - Gatzweiler, Karl-Heinz
A1  - Staat, Manfred
A1  - Wappler, Frank
A1  - Defosse, Jerome
T1  - Comparison of forces acting on maxillary incisors during tracheal intubation with different laryngoscopy techniques: a blinded manikin study
JF  - Anaesthesia
Y1  - 2019
SN  - 1365-2044
U6  - https://doi.org/10.1111/anae.14815
N1  - Die Anhänge "Table S1 (Impact of sex and level of training on dental force. Results presented as median (IQR [range]) and n (%))" und 
"Appendix S1 (Measurement technique.)" stehen unter "Supporting Information" zum Download bereit.
VL  - 74
IS  - 12
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Linder, Peter
A1  - Beckler, Matthias
A1  - Doerr, Leo
A1  - Stoelzle-Feix, Sonja
A1  - Fertig, Niels
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Gossmann, Matthias
T1  - A new in vitro tool to investigate cardiac contractility under physiological mechanical conditions
JF  - Journal of Pharmacological and Toxicological Methods
Y1  - 2019
U6  - https://doi.org/10.1016/j.vascn.2019.05.162
SN  - 1056-8719
VL  - 99
IS  - Article number 106595
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Hüning, Felix
T1  - Complexity for heterogeneous classes: teaching embedded systems using an open project approach
T2  - Varietas delectat: Complexity is the new normality - 47th Annual Conference, Budapest, Hungary16th - 20th September 2019. SEFI 47th Annual Conference Proceedings
Y1  - 2019
SN  - 978-2-87352-018-2
SP  - 540
EP  - 549
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Analysis of volumetric solar radiation absorbers made of wire meshes
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - https://doi.org/10.1063/1.5117521
SN  - 0094243X
VL  - 2126
SP  - 030009-1
EP  - 030009-6
ER  - 
TY  - CHAP
A1  - Mahdi, Zahra
A1  - Rendón, Carlos
A1  - Schwager, Christian
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Novel concept for indirect solar-heated methane reforming
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - https://doi.org/10.1063/1.5117694
SN  - 0094-243X
VL  - 2126
SP  - 180014-1
EP  - 180014-7
PB  - AIP Publishing
CY  - Melville, NY
ER  - 
TY  - CHAP
A1  - May, Martin
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - Latzke, Markus
A1  - Bäumer, Klaus
A1  - Uhlig, Ralf
A1  - Söhn, Matthias
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Experimental facility for investigations of wire mesh absorbers for pressurized gases
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - https://doi.org/10.1063/1.5117547
SN  - 0094243X
VL  - 2126
SP  - 030035-1
EP  - 030035-9
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Alexopoulos, Spiros
A1  - Caminos, Ricardo Alexander Chico
A1  - Mitchell, John C.
A1  - Ruiz, Victor C.
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis K.
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - https://doi.org/10.1063/1.5117663
SN  - 0094243X
VL  - 2126
SP  - 150007-1
EP  - 150007-8
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Optimized Method for 3D Body Scanning Applications Based on KinectFusion
T2  - Communications in Computer and Information Science
Y1  - 2019
U6  - https://doi.org/10.1007/978-3-030-29196-9_6
SN  - 1865-0929
N1  - 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; Funchal; Portugal; 19 January 2018 through 21 January 2018
VL  - 1024
SP  - 100
EP  - 113
PB  - Springer
ER  - 
TY  - JOUR
A1  - Delaittre, Guillaume
T1  - Telechelic Poly(2-Oxazoline)s
JF  - European Polymer Journal
Y1  - 2019
U6  - https://doi.org/10.1016/j.eurpolymj.2019.109281
SN  - 0014-3057
IS  - In Press, Journal Pre-proof, 109281
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Savitskaya, I.S.
A1  - Kistaubayeva, A.S.
A1  - Ignatova, L.V.
A1  - Digel, Ilya
T1  - Antimicrobial and wound healing properties of a bacterial cellulose based material containing B. subtilis cells
JF  - Heliyon
Y1  - 2019
U6  - https://doi.org/10.1016/j.heliyon.2019.e02592
SN  - 2405-8440
VL  - 5
IS  - 10
SP  - Artikelnummer e02592
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Mennicken, Max
A1  - Peter, Sophia Katharina
A1  - Kaulen, Corinna
A1  - Simon, Ulrich
A1  - Karthäuser, Silvia
T1  - Controlling the Electronic Contact at the Terpyridine/Metal Interface
JF  - The Journal of Physical Chemistry C
Y1  - 2019
U6  - https://doi.org/10.1021/acs.jpcc.9b05865
SN  - 1932-7455
VL  - 123
IS  - 35
SP  - 21367
EP  - 21375
ER  - 
TY  - JOUR
A1  - Arreola, Julio
A1  - Keusgen, Michael
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Combined calorimetric gas- and spore-based biosensor array for online monitoring and sterility assurance of gaseous hydrogen peroxide in aseptic filling machines
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - https://doi.org/10.1016/j.bios.2019.111628
SN  - 0956-5663
VL  - 143
IS  - 111628
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schael, S.
A1  - Atanasyan, A.
A1  - Berdugo, J.
A1  - Bretz, T.
A1  - Czupalla, Markus
A1  - Dachwald, Bernd
A1  - Doetinchem, P. von
A1  - Duranti, M.
A1  - Gast, H.
A1  - Karpinski, W.
A1  - Kirn, T.
A1  - Lübelsmeyer, K.
A1  - Maña, C.
A1  - Marrocchesi, P.S.
A1  - Mertsch, P.
A1  - Moskalenko, I.V.
A1  - Schervan, T.
A1  - Schluse, M.
A1  - Schröder, K.-U.
A1  - Schultz von Dratzig, A.
A1  - Senatore, C.
A1  - Spies, L.
A1  - Wakely, S.P.
A1  - Wlochal, M.
A1  - Uglietti, D.
A1  - Zimmermann, J.
T1  - AMS-100: The next generation magnetic spectrometer in space – An international science platform for physics and astrophysics at Lagrange point 2
JF  - Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Y1  - 2019
U6  - https://doi.org/10.1016/j.nima.2019.162561
SN  - 0168-9002
VL  - 944
IS  - 162561
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Ernhardt, Selina
A1  - Drumm, Christian
A1  - van Gog, Tamara
A1  - Brand-Gruwel, Saskia
A1  - Jarodzka, Halszka
T1  - Through the eyes of a programmer : a research project on how to foster programming education with eye-tracking technology
T2  - Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule für Angewandte Wissenschaften Aachen
Y1  - 2019
SN  - 978-3-944330-62-4
SP  - 42
EP  - 47
PB  - Mana-Buch
CY  - Heide
ER  - 
TY  - JOUR
A1  - Krome, Cornelia
A1  - Höft, Jan
A1  - Sander, Volker
T1  - Clustering time series applied to energy markets
JF  - Energy Informatics
Y1  - 2019
U6  - https://doi.org/10.1186/s42162-019-0076-0
SN  - 2520-8942
VL  - 2
IS  - Article numer 17
SP  - 1
EP  - 20
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Solbach, Klaus
A1  - Gratz, Marcel
A1  - Brunheim, Sascha
A1  - Fiedler, Thomas M.
A1  - Johst, Sören
A1  - Bitz, Andreas
A1  - Shooshtary, Samaneh
A1  - Abuelhaija, Asjraf
A1  - Voelker, Maximilian N.
A1  - Rietsch, Stefan H. G.
A1  - Kraff, Oliver
A1  - Maderwald, Stefan
A1  - Flöser, Martina
A1  - Oehmingen, Mark
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
T1  - A 32-channel parallel transmit system add-on for 7T MRI
JF  - Plos one
Y1  - 2019
U6  - https://doi.org/10.1371/journal.pone.0222452
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Finger, Felix
A1  - Havermann, Marc
A1  - Braun, Carsten
A1  - Marino, Matthew
A1  - Bil, Cees
T1  - A highly automated method for simulating airfoil characteristics at low Reynolds number using a RANS - transition approach
T2  - Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany
Y1  - 2019
U6  - https://doi.org/10.25967/490026
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Mass, Primary Energy, and Cost - The Impact of Optimization Objectives on the Initial Sizing of Hybrid-Electric General Aviation Aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany
Y1  - 2019
U6  - https://doi.org/10.25967/490012
SP  - 1
EP  - 17
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Finger, Felix
T1  - Conceptual Design of a Modular 150 kg Vertical Take-off and Landing Unmanned Aerial Vehicle
T2  - Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany
Y1  - 2019
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Leschinger, Tim
A1  - Besch, Katharina
A1  - Aydin, Cansu
A1  - Staat, Manfred
A1  - Scaal, Martin
A1  - Müller, Lars Peter
A1  - Wegmann, Kilian
T1  - Irreparable rotator cuff tears: a biomechanical comparison of superior capsuloligamentous complex reconstruction techniques and an interposition graft technique
JF  - The Orthopaedic Journal of Sports Medicine
Y1  - 2019
U6  - https://doi.org/10.1177/2325967119864590
VL  - 7
IS  - 8
SP  - 1
EP  - 5
ER  - 
TY  - THES
A1  - Tran, Ngoc Trinh
T1  - Limit and Shakedown analysis of structures under stochastic conditions
Y1  - 2019
U6  - https://doi.org/10.24355/dbbs.084-201902121135-0
PB  - Technische Universität Braunschweig
CY  - Braunschweig
ER  - 
TY  - JOUR
A1  - Bhattarai, Aroj
A1  - Staat, Manfred
T1  - A computational study of organ relocation after laparoscopic pectopexy to repair posthysterectomy vaginal vault prolapse
JF  - Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization
Y1  - 2019
U6  - https://doi.org/10.1080/21681163.2019.1670095
SN  - 2168-1171
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Valero, D.
A1  - Bung, Daniel Bernhard
A1  - Crookston, B. M.
T1  - Closure to “Energy Dissipation of a Type III Basin under Design and Adverse Conditions for Stepped and Smooth Spillways”
JF  - Journal of Hydraulic Engineering
Y1  - 2019
U6  - https://doi.org/10.1061/(ASCE)HY.1943-7900.0001669
VL  - 146
IS  - 2
PB  - ASCE
CY  - Reston, Va.
ER  - 
TY  - JOUR
A1  - Roeth, A.A.
A1  - Slabu, I.
A1  - Kessler, A.
A1  - Engelmann, Ulrich M.
T1  - Local treatment of pancreatic cancer with magnetic nanoparticles
JF  - HPB
Y1  - 2019
U6  - https://doi.org/10.1016/j.hpb.2019.10.959
SN  - 1365-182X
VL  - 21
IS  - Supplement 3
SP  - S868
EP  - S869
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Cost Estimation Methods for Hybrid-Electric General Aviation Aircraft
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
SP  - 1
EP  - 13
ER  -