TY - JOUR
A1 - Janz, Norbert
A1 - Ebling, Günther
A1 - Gottschalk, Sandra
A1 - Niggemann, Hiltrud
T1 - The Mannheim Innovation Panels (MIP and MIP-S) of the Centre for European Economic Research (ZEW) / Janz, N., G. Ebling, S. Gottschalk und H. Niggemann
JF - Schmollers Jahrbuch : Zeitschrift für Wirtschafts- und Sozialwissenschaften ; journal of applied social science studies. 121 (2001)
Y1 - 2001
SN - 0342-1783
SP - 123
EP - 129
ER -
TY - JOUR
A1 - Janz, Norbert
A1 - Lööf, Hans
A1 - Peters, Bettina
T1 - Firm Level Innovation and Productivity, Is there a Common Story Across Countries?
JF - Problems and Perspectives in Management (2004)
Y1 - 2004
SN - ISSN 1727-7051
N1 - online download: http://businessperspectives.org/files/ppm/PPM_EN_2004_02_Janz.pdf
SP - 184
EP - 204
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Lööf, Hans
A1 - Peters, Bettina
T1 - Firm Level Innovation and Productivity, Is there a Common Story Across Countries?
Y1 - 2003
SN - ISSN 1727-7051
N1 - ZEW Diskussion Paper. No 03-26 Online : ftp://ftp.zew.de/pub/zew-docs/dp/dp0326.pdf
PB - Zentrum für Europäische Wirtschaftsforschung ZEW
CY - Mannheim
ER -
TY - JOUR
A1 - Grundmann, Reinhard
T1 - Design Criteria for Aeroacoustic Wind Tunnels
Y1 - 1992
N1 - Konferenzeinzelbericht : DGLR-workshop : Joint meeting of the Specialists Groups Test Facilities/Aeroacoustics - Flight Noise . Deutsche Gesellschaft für Luft- und Raumfahrt. Test Facilities Specialist Group ; Deutsche Gesellschaft für Luft- und Raumfahr
ER -
TY - JOUR
A1 - Jacobs, Stephan
T1 - The Teamwork Approach in Requirements Engineering
JF - The nature of requirements engineering / Matthias Jarke ... (Hrsg.)
Y1 - 1999
SN - 3-8265-6174-0
PB - Shaker
CY - Aachen
ER -
TY - JOUR
A1 - Heinrichs, Horst
A1 - Weck, H.
T1 - Efficient finite-element structural analysis by interactive graphic mesh generation
JF - CIRP Annals. 30 (1981), H. 1
Y1 - 1981
SP - 279
EP - 284
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Ebling, Günther
A1 - Gottschalk, Sandra
A1 - Peters, Bettina
T1 - Innovation Activities in the German Economy: Report on indicators from the Innovation Survey 2001 (english translation) / Janz, N., G. Ebling, S. Gottschalk, B. Peters und T. Schmidt
Y1 - 2002
PB - ZEW Zentrum für Europäische Wirtschaftsforschung
CY - Mannheim
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Gottschalk, Sandra
A1 - Hempell, Thomas
A1 - Peters, Bettina
T1 - Innovation Activities in the German Economy. Report on Indicators from the Innovation Survey 2000 (English translation) / Janz, N., S. Gottschalk, T. Hempell, B. Peters, G. Ebling und H. Niggemann
Y1 - 2002
PB - ZEW Zentrum für Europäische Wirtschaftsforschung
CY - Mannheim
ER -
TY - JOUR
A1 - Reichert, Gerhard
A1 - De Lucchi, Michele
T1 - Diffuse Reflexe / Des. Michele De Lucchi, Gerhard Reichert
JF - MD - Internatioal magazine of design (2001)
Y1 - 2001
SN - 0343-0642
N1 - Außenleuchte "Palme"
SP - 26
EP - 27
ER -
TY - JOUR
A1 - Janz, Norbert
T1 - Innovative Power of German Manufacturing Industry Slows Down
JF - ZEW news. English edition. 4 (2002), H. 2002
Y1 - 2002
SP - 5
EP - 5
ER -
TY - JOUR
A1 - Janz, Norbert
T1 - Innovations in Germany: Market Novelties Gain Greater Importance
JF - ZEW news. English edition (2001)
Y1 - 2001
SP - 3
EP - 3
ER -
TY - JOUR
A1 - Starke, Günther
A1 - Kuhne, A.H.
A1 - Frassek, B.
T1 - Components for the automated GMAW process. Bestandteile des automatischen Metall-Schutzgas-Schweissverfahrens
JF - Welding Journal. 63 (1984), H. 1
Y1 - 1984
SN - 0043-2296
SP - 31
EP - 34
ER -
TY - JOUR
A1 - Blome, Hans-Joachim
A1 - Wilson, Thomas L.
T1 - The quantum temperature of accelerating cosmological models of an entangled Universe
JF - Advances in Space Research. 35 (2005), H. 1
Y1 - 2005
SN - 0273-1177
SP - 111
EP - 115
ER -
TY - JOUR
A1 - Blome, Hans-Joachim
A1 - Priester, Wolfgang
T1 - Vacuum energy in cosmic dynamics
JF - Astrophysics and Space Science. 117 (1985), H. 2
Y1 - 1985
SN - 0004-640X
SP - 327
EP - 335
ER -
TY - JOUR
A1 - Pietsch, Wolfram
A1 - Kurbel, Karl
T1 - A Cooperative Work Environment for Evolutionary Software Development / Kurbel, K., Pietsch, W.
JF - Multi-user interfaces and applications : proceedings of the IFIP WG 8.4 Conference on Multi-User Interfaces and Applications, Heraklion, Crete, Greece, 24 - 26 September, 1990 / ed. by Simon Gibbs ...
Y1 - 1990
SN - 0-444-88760-1
N1 - Conference on Multi-User Interfaces and Applications <1990, Hērakleion>
SP - 115
EP - 127
PB - North-Holland Publ.
CY - Amsterdam [u.a.]
ER -
TY - JOUR
A1 - Pietsch, Wolfram
A1 - Steinbauer, Dieter
T1 - Business Process Reengineering
JF - Wirtschaftsinformatik. 36 (1994), H. 5
Y1 - 1994
SN - 0937-6429
SP - 502
EP - 505
ER -
TY - JOUR
A1 - Pietsch, Wolfram
A1 - Herzwurm, G.
T1 - QFD for Customer-Focused Requirements Engineering / Herzwurm, G., Pietsch, W.
JF - Proceedings : 8 - 12 September 2003, Monterey Bay, California, USA / sponsored by IEEE Computer Society Technical Council on Software Engineering (TCSE) ... In cooperation with ACM SigSOFT
Y1 - 2003
SN - 0769519806
N1 - International Requirements Engineering Conference ; (11, 2003, Monterey, Calif.)
SP - 330
EP - 338
PB - IEEE Computer Society
CY - Los Alamitos, Calif. [u.a.]
ER -
TY - JOUR
A1 - Pietsch, Wolfram
T1 - Risk-based Deployment of Standard Software Rollout Processes - a pragmatic approach
JF - QFD : transactions from the Eleventh Symposium on Quality Function Deployment, [June 12 - 18, 1999, Novi, Michigan] / QFD Institute
Y1 - 1999
SN - 1889477117
N1 - Symposium on Quality Function Deployment ; (11, 1999, Novi, Mich.) Online unter: http://www.herzwurm.de/Publikationen/daten/lit/deployment.pdf
SP - 349
EP - 359
PB - QFD Institute
CY - Ann Arbor, Mich.
ER -
TY - BOOK
A1 - Pietsch, Wolfram
T1 - Software quality management III : [... held in Seville in April 1995] / [Third International Conference on Software Quality Management]. Ed.: M. Ross
Y1 - 1995
SN - 1853123099
N1 - International Conference on Software Quality Management ; (3, 1995, Sevilla)
PB - Computational Mechanics Publ.
CY - Southampton [u.a.]
ER -
TY - JOUR
A1 - Pietsch, Wolfram
A1 - Kurbel, Karl
A1 - Jung, R.
T1 - Modeling Knowledge about Long-term IS-Integration and Integration-oriented Reengineering with KADS / Kurbel, K., Jung, R., Pietsch, W.
JF - Distributed information systems in business / W. König ... (eds.)
Y1 - 1996
SN - 3-540-61094-4
PB - Springer
CY - Berlin [u.a.]
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Licht, Georg
T1 - Innovation Activities and European Patenting of German Firms. A Panel Data Analysis / Janz, N., G. Licht
Y1 - 2002
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Peters, Bettina
T1 - Innovation and Innovation Success in the German Manufacturing Sector. Econometric Evidence at Firm Level / Janz, N. and Peters, B.
Y1 - 2002
ER -
TY - JOUR
A1 - Pietsch, Wolfram
A1 - Taudes, A.
T1 - Groupware Support for Interorganizational Courseware-Development. A Case Study / Pietsch, W. , Taudes, A.
JF - IM : die Fachzeitschrift für Information Management & Consulting (1994)
Y1 - 1994
SN - 0930-5181, 1616-1017
SP - 12
EP - 18
ER -
TY - JOUR
A1 - Pietsch, Wolfram
A1 - Kurbel, K.
A1 - Labentz, M.
T1 - Prototyping und Projektmanagement bei großen Entwicklungsteams / Kurbel, K., Labentz, M., Pietsch, W.
JF - Information management : IM ; Praxis, Ausbildung u. Forschung d. Wirtschaftsinformatik. 2 (1987), H. 1
Y1 - 1987
SN - 0930-5181
SP - 6
EP - 15
ER -
TY - JOUR
A1 - Pietsch, Wolfram
A1 - Kurbel, Karl
T1 - A Portable Implementation of Index Sequential Input-Output [Part 1] / Kurbel, Karl; Pietsch, W.
JF - Ada letters. 6 (1986), H. 2
Y1 - 1986
SN - 0736-721X
SP - 29
EP - 40
ER -
TY - JOUR
A1 - Pietsch, Wolfram
A1 - Kurbel, Karl
T1 - A Portable Implementation of Index Sequential Input-Output [Part 2] / Kurbel, Karl; Pietsch, W.
JF - Ada letters. 6 (1986), H. 3
Y1 - 1986
SN - 0736-721X
SP - 6
EP - 13
ER -
TY - JOUR
A1 - Blome, Hans-Joachim
A1 - Priester, W.
T1 - Big Bounce in the very early Universe
JF - Astronomy and Astrophysics. 250 (1991), H. 1
Y1 - 1991
SN - 0004-6361
SP - 43
EP - 49
ER -
TY - JOUR
A1 - Bullerschen, Klaus-Gerd
A1 - Wilhelmi, Herbert
A1 - Wimmer, W.
T1 - Influence of non-uniform material properties and water cooling on current density and temperature profiles in arc furnace elektrodes
JF - Steel Research. 56 (1985), H. 11
Y1 - 1985
SN - 0177-4832
SP - 559
EP - 564
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Ebling, Günther
A1 - Niggemann, Hiltrud
A1 - Stahl, Harald
T1 - 2nd Community Innovation Survey. 1st Interim Report. Report prepared for Eurostat / Ebling, G., N. Janz, H. Niggemann und H. Stahl
Y1 - 1998
PB - ZEW Zentrum für Europäische Wirtschaftsförderung
CY - Mannheim
ER -
TY - BOOK
A1 - Gottschalk, Sandra
A1 - Janz, Norbert
A1 - Rennings, Klaus
T1 - Characteristics and Performance of Eco-Innovative Firms in the German Service Sector
Y1 - 1998
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Ebling, Günther
A1 - Göggerle, J.
A1 - Licht, Georg
T1 - The Longitudinal Aspect of Innovation Surveys / G. Ebling, J. Göggerle, N. Janz, G. Licht und H. Stahl
Y1 - 1998
PB - ZEW Zentrum für Europäische Wirtschaftsförderung
CY - Mannheim
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Gottschalk, Sandra
T1 - Innovation Dynamics and Endogenours Market Structue. An Econometric Investigation with Aggregated Innovation Survey Data / Gottschalk, S. und N. Janz
Y1 - 2001
N1 - ZEW-Discussion Paper 01-39 online unter ftp://ftp.zew.de/pub/zew-docs/dp/dp0139.pdf
PB - ZEW Zentrum für Europäische Wirtschaftsförderung
CY - Mannheim
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Ebling, Günther
T1 - Export and Innovation Activities in the German Service Sector. Empirical Evidence at the Firm Level / Ebling, G.. und N. Janz
Y1 - 1999
N1 - ZEW-Discussion Paper 99-53 online unter ftp://ftp.zew.de/pub/zew-docs/dp/dp5399.pdf
PB - ZEW Zentrum für Europäische Wirtschaftsförderung
CY - Mannheim
ER -
TY - BOOK
A1 - Janz, Norbert
T1 - Interpreting Estimation Result of Euler Equation Investment Models when Factor Markets are Imperfectly Competitive
Y1 - 1997
N1 - ZEW-Discussion Paper 97-29 online unter ftp://ftp.zew.de/pub/zew-docs/dp/dp2997.pdf
PB - ZEW Zentrum für Europäische Wirtschaftsforschung
CY - Mannheim
ER -
TY - JOUR
A1 - Starke, Günther
A1 - Drews, P.
T1 - Development approaches for advanced control in automated arc welding
Y1 - 1985
N1 - Konferenz-Einzelbericht: Automation and robotisation in welding and allied processes. International conference on automation and robotisation in welding and allied processes, Strasbourg, FR, 02.09.1985-03.09.1985
SP - 115
EP - 124
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Ebling, Günther
A1 - Gottschalk, Sandra
A1 - Niggemann, Hiltrud
T1 - Prospects of the German Economy: Innovation Activities in the Manufacturing Sector. Survey 1999 Report to the Federal Ministry of Education and Research (English translation) / Janz, N., G. Ebling, S. Gottschalk und H. Niggemann
Y1 - 2000
PB - ZEW Zentrum für Europäische Wirtschaftsforschung
CY - Mannheim
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Ebling, Günther
A1 - Gottschalk, Sandra
A1 - Niggemann, Hiltrud
T1 - Services in the Future: Innovation Activities in the Service Sector. Survey 1999 (English translation) / Janz, N., G. Ebling, S. Gottschalk und H. Niggemann
Y1 - 2000
PB - ZEW Zentrum für Europäische Wirtschaftsforschung
CY - Mannheim
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Ebling, Günther
A1 - Gottschalk, Sandra
A1 - Niggemann, Hiltrud
T1 - 2nd Community Innovation Survey. Final Report. Report prepared for Eurostat / Ebling, G. , S. Gottschalk, N. Janz und H. Niggemann
Y1 - 1999
PB - ZEW Zentrum für Europäische Wirtschaftsforschung
CY - Mannheim
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Ebling, Günther
A1 - Gottschalk, Sandra
A1 - Niggemann, Hiltrud
T1 - 2nd Community Innovation Survey. 2nd Interim Report. Report prepared for Eurostat / Ebling, G. , S. Gottschalk, N. Janz und H. Niggemann
Y1 - 1999
PB - ZEW Zentrum für Europäische Wirtschaftsforschung
CY - Mannheim
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Ebling, Günther
A1 - Gottschalk, Sandra
A1 - Licht, Georg
T1 - Prospects of the German Economy: Innovation Activities in the Manufacturing Sector. Survey 1998 (English translation) / Janz, N., G. Ebling, S. Gottschalk, G. Licht und H. Niggemann
Y1 - 1999
PB - ZEW Zentrum für Europäische Wirtschaftsforschung
CY - Mannheim
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Ebling, Günther
A1 - Gottschalk, Sandra
A1 - Licht, Georg
T1 - Services in the Future. Innovation Activities in the Service Sector. Survey 1998 (English translation) / Janz, N., G. Ebling, S. Gottschalk, G. Licht und H. Niggemann
Y1 - 1999
PB - ZEW Zentrum für Europäische Wirtschaftsforschung
CY - Mannheim
ER -
TY - BOOK
A1 - Janz, Norbert
A1 - Licht, Georg
A1 - Ebling, Günther
A1 - Niggemann, Hiltrud
T1 - Innovation in the Service Sector. Selected Facts and Some Policy Conclusions / Licht, G., G. Ebling, N. Janz, H. Niggemann
Y1 - 1999
PB - European Commission
CY - Luxembourg
ER -
TY - JOUR
A1 - Starke, Günther
A1 - Drews, P.
T1 - Le soudage au siecle de l'informatique
JF - Souder. 18 (1994), H. 6
Y1 - 1994
SN - 0246-1900
SP - 33
EP - 44
ER -
TY - JOUR
A1 - Starke, Günther
T1 - Welding in the century of information technology. Session 1
JF - Welding in the World. 34 (1994), H. 9
Y1 - 1994
SN - 0043-2288
SP - 1
EP - 20
ER -
TY - JOUR
A1 - Blome, Hans-Joachim
T1 - The scale of the universe: a unit of length
JF - Comments on astrophysics. 17 (1994)
Y1 - 1994
SN - 0146-2970
SP - 327
EP - 335
ER -
TY - JOUR
A1 - Blome, Hans-Joachim
A1 - Kundt, Wolfgang
T1 - Leptonic jets from young stellar objects?
JF - Astrophysics and Space Science. 148 (1988), H. 2
Y1 - 1988
SN - 0004-640X
SP - 343
EP - 361
ER -
TY - JOUR
A1 - Blome, Hans-Joachim
A1 - Chu, Y.
A1 - Hoell, J
A1 - Priester, W.
T1 - On the observational discrimination of Friedmann-Lemaître models
JF - Large Scale Structures of the Universe: Proceedings of the 130th Symposium of the International Astronomical Union, dedicated to the memory of Marc A. Aaronson (1950-1987) held in Balatonfured, Hungary, June 15-20, 1987. Edited by Jean Audouze, Marie-Christine Pelletan and Sandor Szalay.
Y1 - 1988
SN - 90-277-2742-2
N1 - International Astronomical Union. Symposium no. 130
SP - 517
PB - Kluwer Academic Publishers
CY - Dordrecht
ER -
TY - JOUR
A1 - Blome, Hans-Joachim
A1 - Wilson, Thomas L.
T1 - The entangled Universe
JF - Relativistic Astrophysics and Cosmology, Proceedings of the 13th Course of the International School of Cosmic Ray Astrophysics, held in Erice, Italy, 2-14 June 2002 / edited by Maurice M. Shapiro ... [et al.]
Y1 - 2004
SN - 981-238-727-7
SP - 23
EP - 38
PB - World Scientific Publishing
CY - New Jersey, NJ
ER -
TY - JOUR
A1 - Blome, Hans-Joachim
A1 - Kundt, W.
T1 - Hypersonic Jets from Young Stars in Molecular Clouds
JF - Circumstellar matter : proceedings of the 122nd symposium of the Internat. Astronom. Union held in Heidelberg, FRG, June 23 - 27, 1986 / ed. by I. Appenzeller ...
Y1 - 1987
SN - 90-277-2511-X
SP - 73
EP - 74
PB - Reidel
CY - Dordrecht u.a.
ER -
TY - JOUR
A1 - Blome, Hans-Joachim
A1 - Priester, Wolfgang
T1 - The problem of the primeval explosion: 'Big bang' or 'big bounce'? I
JF - Sterne und Weltraum. 26 (1987)
Y1 - 1987
SN - 0039-1263
SP - 83
EP - 89
ER -
TY - JOUR
A1 - Esch, Thomas
T1 - Optimized design of the lubrication system of modern combustion engines. Verbesserte Ausführung von Schmierungssystemen bei modernen Verbrennungsmotoren
Y1 - 1991
SN - 0148-7191
U6 - https://doi.org/10.4271/912407
N1 - Konferenz-Einzelbericht : SAE technical papers / Society of Automotive Engineers, Paper-Nr. 912407
SP - 1
EP - 11
ER -
TY - BOOK
A1 - Schürmann, Wilhelm
A1 - Müller, Christian Philipp
T1 - Temporary translation(s) - Sammlung Schürmann. Kunst der Gegenwart und Fotografie / Gestaltung der Seiten ...: Christian Philipp Müller...
Y1 - 1994
SN - 3-89479-067-9
N1 - Katalogbuch zur Ausstellung Temporary Translation(s), Deichtorhallen Hamburg, 10.XII.1994 - 12.II.1995
PB - Ars Nicolai
CY - Berlin
ER -
TY - JOUR
A1 - Pietschmann, Bernd P.
A1 - Vahs, Dietmar
T1 - Change Management - Wie Sie Ihr Unternehmen fit für die Zukunft machen. Teil 1: Erfolgsfaktoren von Veränderungsprozessen
JF - News / ASU ; BJU : von Unternehmern für Unternehmer. Ausgabe Baden-Württemberg. 13 (1996), H. 5
Y1 - 1996
SP - 76
EP - 79
ER -
TY - JOUR
A1 - Pietschmann, Bernd P.
A1 - Vahs, Dietmar
T1 - Change Management - Wie Sie Ihr Unternehmen fit für die Zukunft machen. Teil 2: Prozeßmanagement - Von starren Strukturen zu flexiblen Prozessen
JF - News / ASU ; BJU : von Unternehmern für Unternehmer. Ausgabe Baden-Württemberg. 13 (1996), H. 6
Y1 - 1996
SP - 84
EP - 86
ER -
TY - JOUR
A1 - Gerhardt, Hans Joachim
A1 - Kramer, C.
T1 - Aerodynamsiche RA-Optimierung
JF - Zentralblatt fuer Industriebau. 31 (1985), H. 5
Y1 - 1985
SN - 0044-4227
SP - 358
EP - 362
ER -
TY - JOUR
A1 - Gerhardt, Hans Joachim
A1 - Kramer, C.
A1 - Janssen, L.-J.
T1 - Flow studies of an open jet wind tunnel and comparison with closed and slotted walls
Y1 - 1985
N1 - Konferenz-Einzelbericht: 6th Colloquium on Industrial Aerodynamics, Road Vehicle Aerodynamics, Fachhochschule Aachen, 19.-21.6.1985
SP - 7
EP - 28
ER -
TY - JOUR
A1 - Gerhardt, Hans Joachim
A1 - Cooper, K.-R.
A1 - Whitbread, R.
A1 - Gary, K.-P. (u.a.)
T1 - A comparison of aerodynamic drag measurements on model trucks in closed-jet and open-jet wind tunnels
Y1 - 1985
N1 - Konferenz-Einzelbericht : 6th Colloquium on Industrial Aerodynamics, Road Vehicle Aerodynamics, Fachhochschule Aachen, 19.-21.6.1985
SP - 261
EP - 274
ER -
TY - JOUR
A1 - Pietschmann, Bernd P.
A1 - Ruhtz, Vanessa
T1 - Knowledge Management
JF - Personal : Zeitschrift für Human Resource Management. 53 (2001), H. 5
Y1 - 2001
SN - 0031-5605
SP - 242
EP - 249
ER -
TY - JOUR
A1 - Biener, Ernst
A1 - Bethke, H.
A1 - Sasse, T.
A1 - Wernhoff, T.
T1 - Alternative landfill capping using locally available recycled material
JF - Land contamination & reclamation. 14 (2003), H. 4
Y1 - 2003
SN - 0967-0513
SP - 419
EP - 427
ER -
TY - JOUR
A1 - Biener, Ernst
A1 - Sasse, T.
A1 - Wernhoff, T.
T1 - Using harbour dredged material for combination sealing of the former Bockhorner Weg disposal site in Bremen, Germany
JF - Proceedings of the International Harbour Congress. 13 (2003)
Y1 - 2003
N1 - International Harbour Congress <13, 2003, Antwerpen>
SP - 101
EP - 109
ER -
TY - JOUR
A1 - Hirschberg, Rainer
T1 - Computer-Aided-Engineering in der Technischen Gebäudeausrüstung
JF - computer spezial (1994)
Y1 - 1994
N1 - Beil. zu: Tiefbau, Ingenieurbau, Strassenbau (1994)Nr.5
SP - 32
EP - 37
ER -
TY - JOUR
A1 - Höttges, Jörg
T1 - Turbulence and Mixing Mechanics in Compound Open Channel Flow / Arnold, Uwe; Höttges, Jörg; Rouvé, Gerhard
JF - On cutoff ratios of curved channels : paper presented at the 23rd Congress of the IAHR, Ottawa, Canada, August 21 - 25, 1989 / G. J. Klaassen; B. H. J.van Zanten
Y1 - 1990
N1 - Congress of the IAHR ; (23 : ; 1989.08.21-25 : ; Ottawa)
PB - Delft Hydraulics
CY - Delft
ER -
TY - JOUR
A1 - Höttges, Jörg
A1 - Arnold, Uwe
A1 - Rouvé, Gerhard
T1 - Profiles of Mixing Coefficient in Compound Open Channel
JF - Flow modeling and turbulence measurements : [... a collection of lectures and papers presented at the Fourth International Symposium on Refined Flow Modelling and Turbulence Measurements held in Wuhan, People's Republic of China, on September 20-23, 1990]
Y1 - 1992
SN - 1-56032-209-8
N1 - International Symposium on Refined Flow Modelling and Turbulence Measurements <4, 1990, Wuhan>
PB - Hemisphere Publ. Corp.
CY - Washington, DC [u.a.]
ER -
TY - JOUR
A1 - Höttges, Jörg
T1 - A Full Finite Element Solution for the Unsteady Advection-Diffusion Equation
JF - Computational methods in water resources : [proceedings of the Ninth International Conference on Computational Methods in Water Resources held at the University of Colorado at Denver, U.S.A., in June 1992] / ed.: T. F. Russell
Y1 - 1992
SN - 185312169X
N1 - International Conference on Computational Methods in Water Resources ; (9, 1992, Denver, Colo.)
PB - Computational Mechanics Publications [u.a.]
CY - Southampton [u.a.]
ER -
TY - JOUR
A1 - Höttges, Jörg
A1 - Feldhaus, R.
A1 - Brockhaus, T.
A1 - Rouvé, Gerhard
T1 - Finite Element Simulation of Flow and Pollution Transport applied to a Part of the River Rhine / Feldhaus, R.; J. Höttges, T. Brockhaus; G. Rouvé
JF - Hydraulic and environmental modelling : proceedings of the Second International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine, and River Waters / [IAHR-AIRH]. Ed. by R. A. Falconer
Y1 - 1992
N1 - International Conference on Hydraulic and Environmental Modelling of Coastal, Estuarine, and River Waters ; (2, 1992, Bradford)
PB - Ashgate
CY - Aldershot, Hants, UK [u.a.]
ER -
TY - JOUR
A1 - Höttges, Jörg
A1 - Arnold, Uwe
A1 - Rouvé, Gerhard
T1 - Measurement of transverse mixing using digital image acquisition
JF - Mixing and transport in the environment : a memorial volume for Catherine M. Allen (1954-1991) / ed. by Keith J. Beven
Y1 - 1994
SN - 0471941425
PB - Wiley
CY - Chichester [u.a.]
ER -
TY - BOOK
A1 - Kettern, Jürgen
T1 - Mechanical and biological treatment of waste after separate collection / R. Damiecki; J.T. Kettern. Italian Ministry of Enviroment
Y1 - 1993
N1 - SARDINIA 93 ; 2 ; International Landfill Symposium ; (4. : ; 1993.10.11-15 : ; S. Margherita di Pula)
PB - Eigenverlag
CY - Caglieri
ER -
TY - JOUR
A1 - Höttges, Jörg
A1 - Ritterbach, E.
A1 - Els, H.
T1 - Optical Improvement of LDV-Measurement in Pipe Flow / Ritterbach, E.; J. Höttges; H. Els
JF - Laser anemometry : advances and applications; proceedings of the 2. International Conference, Strathclyde, Scotland, 21st to 23rd September 1987 / ed. by John Turner ... UK LDA Users Group
Y1 - 1987
SN - 3540187561
PB - Springer
CY - Berlin [u.a.]
ER -
TY - JOUR
A1 - Höttges, Jörg
A1 - Arnold, Uwe
A1 - Rouvé, Gerhard
T1 - Combined Digital Image and Finite Element Analysis of Mixing in Compound Open Channel Flow / Arnold, U.; J. Höttges; G. Rouvé
JF - Refined flow modelling and turbulence measurements : proceedings of the Third International Symposium Tokyo, Japan 26 - 28 July, 1988 / ed. by Y. Iwasa. Scientific Organizing Committee of the Third International Symposium on Refined Flow Modelling and Tur
Y1 - 1989
SN - 4-946443-03-7
N1 - International Symposium on Refined Flow Modelling and Turbulence Measurements <3, 1988, Tōkyō>
SP - 569
EP - 576
PB - Universal Acad. Press
CY - Tokyo
ER -
TY - JOUR
A1 - Biener, Ernst
A1 - Sasse, T.
T1 - Construction and rehabilitation of landfill shafts
JF - Sardinia 93 : Fourth International Landfill Symposium "Barrier systems, environmental aspects, upgrading and remediation, siting, monofills, effects of waste pretreatment, landfilling in developing countries" ; 11 - 15 October 1993, S. Margherita di Pula (Cagliari), Sardinia, Italy ; proceedings / coord. by Thomas H. Christensen ... - Bd. 1
Y1 - 1993
N1 - International Landfill Symposium <4, 1993, Santa Margherita, Pula>
SP - 451
EP - 460
PB - CISA, Environmental Sanitary Engineering Centre
CY - Cagliari
ER -
TY - JOUR
A1 - Gossla, Ulrich
A1 - Sato, R.
T1 - Present production circumstances of aggregate in Germany / Sato, R.; Gossla, U.
JF - Cement & Concrete (1998)
Y1 - 1998
N1 - auf Japanisch
SP - 146
EP - 153
ER -
TY - CHAP
A1 - Schöning, Michael Josef
A1 - Abdelghani, Adnane
T1 - Nanoscale Science and Technology (NS&T’12) : Proceedings Book Humboldt Kolleg <2012, Tunisia> ; Tunisia, 17-19 March, 2012 / ed. by Michael J. Schöning ; Adnane Abdelghani
N2 - Proceedings of the 2nd Humboldt Kolleg, Hammamet, Tunisia Organizer: Alexander von Humboldt Stiftung, Germany. pdf 184 p. Welcome Address Dear Participants, Welcome to the 2nd Humboldt Kolleg in “Nanoscale Science and Technology” (NS&T’12) in Tunisia, sponsored by the "Alexander von Humboldt" foundation. The NS&T’12 multidisciplinary scientific program includes seven "hot" topics dealing with "Nanoscale Science and Technology" covering basic and application-oriented research as well as industrial (market) aspects: - Molecular Biophyics, Spectroscopy Techniques, Imaging Microscopy - Nanomaterials Synthesis for Medicine and Bio-chemical Sensors - Nanostructures, Semiconductors, Photonics and Nanodevices - New Technologies in Market Industry - Environment, Electro-chemistry, Bio-polymers and Fuel Cells - Nanomaterials, Photovoltaic, Modelling, Quantum Physics - Microelectronics, Sensors Networks and Embedded Systems We are deeply indebted to all members of the Scientific Committee and General Chairs for joint Sessions and to all speakers and chairmen, who have dedicated invaluable time and efforts for the realization of this event. On behalf of the Organizing Committee, we are cordially inviting you to join the conference and hope that your stay will be fruitful, rewarding and enjoyable. Prof. Dr. Michael J. Schöning, Prof. Dr. Adnane Abdelghani
KW - Biosensor
KW - Nanotechnologie
KW - Nanomaterial
KW - Nano Materials
KW - Bio-Sensors
Y1 - 2012
U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-3544
ER -
TY - GEN
A1 - Kämper, Klaus-Peter
T1 - Lecture notes Sensors and Actuators WS 2008/2009
N2 - Password necessarily. Access only for Students by Prof. Dr. Klaus-Peter Kämper. Winter semester 2008/2009. 488 pages (pdf) Contents 1. Introduction 2. Introduction to Sensors 3. Introduction to Microfabrication 4. Pressure Sensors 5. Acceleration Sensors 6. Angular Rate Sensors 7. Position Sensors 8. Flow Sensors 9. Piezoelectric Actuators 10. Magnetostrictive Actuators 11. Actuators based on Shape Memory Alloys 12. Actuators based on Electrorheological Fluids 13. Actuators based on Magnetorheological Fluids 14. Index
N2 - Kennwortgeschützter Zugang nur für Studierende bei Prof. Dr. Klaus-Peter Kämper. Wintersemester 2008/2009. 488 Seiten (pdf-Format)
KW - Sensor
KW - Aktor
KW - Sensoren
KW - Aktoren
KW - Sensores
KW - Actuators
KW - Microfabrication
Y1 - 2008
ER -
TY - CHAP
A1 - Mertens, Josef
T1 - Laminar leading edges: manufacturing, contamination, and operational aspects - results from the German RaWid programme
N2 - RaWid was the German national technology programme on transonic aerodynamics and supporting technologies, lasting from 1995 to 1998. One of the main topics was laminar wing development. Besides aerodynamic design work, many operational aspects were investigated. A manufacturing concept was developed to be applied to operational laminar wings and empennages. It was built in a large scale manufacturing demonstrator with the aerodynamic shape of a 1,5 m section of the A320 fin nose. Tolerances in shape and roughness fulfilled all requirements. The construction can easily be adapted to varying stiffness and strength requirements. Weight and manufacturing costs are comparable to common nose designs. The mock-up to be designed in ALTTA is based on this manufacturing principle. Another critical point is contamination of suction surfaces. Several tests were performed to investigate perforated titanium suction surfaces at realistic operational conditions: - a one year flight test with a suction plate in the stagnation area of the Airbus "Beluga" - a one year test of several suction plates in a ground test near the airport - a one year test of a working suction ground test installation at all weather conditions. No critical results were found. There is no long term suction degradation visible. Icing conditions and ground de-icing fluids used on airports did not pose severe problems. Some problems detected require only respection of weak design constraints.
KW - Laminare Strömung
KW - Ansaugsystem
KW - Profilumströmung
KW - Laminarprofil
KW - RaWid
KW - hybrid laminar flow
KW - suction systems
KW - suction structure
KW - contamination
KW - operational aspects
Y1 - 2000
ER -
TY - CHAP
A1 - Kern, Alexander
A1 - Dikta, Gerhard
T1 - Probability of damage of electrical and electronic systems due to indirect lightning flashes - investigation of data from German insurance companies
N2 - In the presented paper data collected from the field related to damage statistics of electrical and electronic apparatus in household are reported and investigated. These damages (total number approx. 74000 cases), registered by five German insurance companies in 2005 and 2006, were adviced by customers as caused by lightning overvoltages. With the use of stochastical methods it is possible, to reasses the collected data and to distinguish between cases, which are with high probability caused by lightning overvoltages, and those, which are not. If there was an indication for a direct strike, this case was excluded, so the focus was only on indirect lightning flashes, i.e. only flashes to ground near the structure and flashes to or nearby an incoming service line were investigated. The data from the field contain the location of damaged apparatus (residence of the policy holder) and the distances of the nearest cloud-to-ground stroke to the location of the damage registered by the German lightning location network BLIDS at the date of damage. The statistical data along with some complementary numerical simulations allow to verify the correspondence of the Standards rules used for IEC 62305-2 with the field data and to define some correction needs. The results could lead to a better understanding whether a damage reported to an insurance company is really caused by indirect lightning, or not.
KW - Blitzschutz
KW - lightning flash
Y1 - 2009
ER -
TY - CHAP
A1 - Schöning, Michael Josef
A1 - Abdelghani, Adnane
T1 - Advancements in Nanotechnology and Microelectronics (ANM '09) <2009, Tunisia>: Proceedings book ; Tunisia, November, 13 & 14, 2009 / Humboldt Kolleg. Ed. by Michael J. Schöning ; Adnane Abdelghani
N2 - The ANM’09 multi-disciplinary scientific program includes topics in the fields of "Nanotechnology and Microelectronics" ranging from "Bio/Micro/Nano Materials and Interfacing" aspects, "Chemical and Bio-Sensors", "Magnetic and Superconducting Devices", "MEMS and Microfluidics" over "Theoretical Aspects, Methods and Modelling" up to the important bridging "Academics meet Industry".
KW - Nanopartikel
KW - Biosensor
KW - Supraleiter
KW - MEMS
KW - Biophoton
KW - Nanotechnology ; Microelectronics ; Biosensors ; Superconductor ; MEMS
Y1 - 2009
U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-3113
ER -
TY - CHAP
A1 - Kirchhof, M.
A1 - Kraft, Bodo
T1 - UML-based modeling of architectural knowledge and design
N2 - IASSE-2004 - 13th International Conference on Intelligent and Adaptive Systems and Software Engineering eds. W. Dosch, N. Debnath, pp. 245-250, ISCA, Cary, NC, 1-3 July 2004, Nice, France We introduce a UML-based model for conceptual design support in civil engineering. Therefore, we identify required extensions to standard UML. Class diagrams are used for elaborating building typespecific knowledge: Object diagrams, implicitly contained in the architect’s sketch, are validated against the defined knowledge. To enable the use of industrial, domain-specific tools, we provide an integrated conceptual design extension. The developed tool support is based on graph rewriting. With our approach architects are enabled to deal with semantic objects during early design phase, assisted by incremental consistency checks.
KW - UML
KW - UML
KW - Unified Modeling Language
KW - UML
KW - Unified Modeling Language
Y1 - 2004
ER -
TY - CHAP
A1 - Kraft, Bodo
A1 - Schneider, Gerd
T1 - Semantic Roomobjects for Conceptual Design Support : A Knowledge-based Approach
N2 - In: Computer Aided Architectural Design Futures 2005 2005, Part 4, 207-216, DOI: http://dx.doi.org/10.1007/1-4020-3698-1_19 The conceptual design at the beginning of the building construction process is essential for the success of a building project. Even if some CAD tools allow elaborating conceptual sketches, they rather focus on the shape of the building elements and not on their functionality. We introduce semantic roomobjects and roomlinks, by way of example to the CAD tool ArchiCAD. These extensions provide a basis for specifying the organisation and functionality of a building and free architects being forced to directly produce detailed constructive sketches. Furthermore, we introduce consistency analyses of the conceptual sketch, based on an ontology containing conceptual relevant knowledge, specific to one class of buildings.
KW - CAD
KW - CAD
KW - Bauingenieurwesen
KW - CAD
KW - civil engineering
Y1 - 2005
SN - 978-1-4020-3460-2
ER -
TY - CHAP
A1 - Kraft, Bodo
A1 - Wilhelms, Nils
T1 - Visual Knowledge Specification for Conceptual Design
N2 - Proc. of the 2005 ASCE Intl. Conf. on Computing in Civil Engineering (ICCC 2005) eds. L. Soibelman und F. Pena-Mora, Seite 1-14, ASCE (CD-ROM), Cancun, Mexico, 2005 Current CAD tools are not able to support the fundamental conceptual design phase, and none of them provides consistency analyses of sketches produced by architects. To give architects a greater support at the conceptual design phase, we develop a CAD tool for conceptual design and a knowledge specification tool allowing the definition of conceptually relevant knowledge. The knowledge is specific to one class of buildings and can be reused. Based on a dynamic knowledge model, different types of design rules formalize the knowledge in a graph-based realization. An expressive visual language provides a user-friendly, human readable representation. Finally, consistency analyses enable conceptual designs to be checked against this defined knowledge. In this paper we concentrate on the knowledge specification part of our project.
KW - CAD
KW - CAD
KW - Bauingenieurwesen
KW - CAD
KW - civil engineering
Y1 - 2005
ER -
TY - CHAP
A1 - Kraft, Bodo
A1 - Retkowitz, Daniel
T1 - Rule-Dependencies for Visual Knowledge Specification in Conceptual Design
N2 - In: Proc. of the 11th Intl. Conf. on Computing in Civil and Building Engineering (ICCCBE-XI) ed. Hugues Rivard, Montreal, Canada, Seite 1-12, ACSE (CD-ROM), 2006 Currently, the conceptual design phase is not adequately supported by any CAD tool. Neither the support while elaborating conceptual sketches, nor the automatic proof of correctness with respect to effective restrictions is currently provided by any commercial tool. To enable domain experts to store the common as well as their personal domain knowledge, we develop a visual language for knowledge formalization. In this paper, a major extension to the already existing concepts is introduced. The possibility to define rule dependencies extends the expressiveness of the knowledge definition language and contributes to the usability of our approach.
KW - CAD
KW - CAD
KW - Bauingenieurwesen
KW - CAD
KW - civil engineering
Y1 - 2006
ER -
TY - JOUR
A1 - Kraft, Bodo
A1 - Nagl, Manfred
T1 - Visual Knowledge Specification for Conceptual Design: Definition and Tool Support
N2 - In: Advanced Engineering Informatics. Vol 21, Issue 1, 2007, Pages 67-83 http://dx.doi.org/10.1016/j.aei.2006.10.001 eds. J.C. Kunz, I.F.C. Smith and T. Tomiyama, Elsevier, Seite 1-22 Current CAD tools are not able to support the conceptual design phase, and none of them provides a consistency analysis for sketches produced by architects. This phase is fundamental and crucial for the whole design and construction process of a building. To give architects a better support, we developed a CAD tool for conceptual design and a knowledge specification tool. The knowledge is specific to one class of buildings and it can be reused. Based on a dynamic and domain-specific knowledge ontology, different types of design rules formalize this knowledge in a graph-based form. An expressive visual language provides a user-friendly, human readable representation. Finally, a consistency analysis tool enables conceptual designs to be checked against this formal conceptual knowledge. In this article, we concentrate on the knowledge specification part. For that, we introduce the concepts and usage of a novel visual language and describe its semantics. To demonstrate the usability of our approach, two graph-based visual tools for knowledge specification and conceptual design are explained.
KW - CAD
KW - CAD
KW - Bauingenieurwesen
KW - CAD
KW - civil engineering
Y1 - 2007
ER -
TY - CHAP
A1 - Fredebeul-Krein, Markus
T1 - Encouraging competition and investment into next generation access networks: The case of long term risk sharing contracts
N2 - Working paper distributed at 2nd Annual Next Generation Telecommunications Conference 2009, 13th – 14th October 2009, Brussels 14 pages Abstract Governments all over Europe are in the process of adopting new broadband strategies. The objective is to create modern telecommunications networks based on powerful broadband infrastructures". In doing so, they aim for innovative and investment-friendly concepts. For instance, in a recently published consultation paper on the subject the German regulator BNetzA declared that it will take “greater account of … reducing risks, securing the investment and innovation power, providing planning certainty and transparency – in order to support and advance broadband rollout in Germany”. It further states that when regulating wholesale rates it has to be ensured that “… adequate incentives for network rollout are provided on the one hand, while sustainable and fair competition is ensured on the other”. Also an EC draft recommendation on regulated network access is about to set new standards for the regulation of next generation access networks. According to the recommendation the prices of new assets shall be based on costs plus a projectspecific risk premium to be included in the costs of capital for the investment risk incurred by the operator. This approach has been criticised from various sides. In particular it has been questioned whether such an approach is adequate to meet the objectives of encouraging both competition and investment into next generation access networks. Against this background, the concept of “long term risk sharing contracts” has been proposed recently as an approach which does not only incorporate the various additional risks involved in the deployment of NGA infrastructure, but has several other advantages. This paper will demonstrate that the concept allows for competition to evolve at both the retail and wholesale level on fair, objective, non-discriminatory and transparent terms and conditions. Moreover, it ensures the highest possible investment incentive in line with socially desirable outcome. The paper is organised as follows: The next section will briefly outline the importance of encouraging competition and investment in an NGA-environment. The third section will specify the design of long term risk sharing contracts in view of achieving these objectives. The fourth section will examine potential problems associated with the concept. In doing so a way of how to deal with them will be elaborated. The last section will look at arguments against long term risk sharing contracts. It will be shown that these arguments are not strong enough to build a case against introducing such contracts.
KW - Electronic Commerce
KW - Breitband Markt
KW - Regulierung
KW - Internet
KW - Bundesnetzagentur
KW - broadband market
KW - regulation
KW - Internet
KW - next generation access networks
KW - risk sharing
Y1 - 2009
ER -
TY - CHAP
A1 - Kraft, Bodo
A1 - Meyer, Oliver
A1 - Nagl, Manfred
T1 - Graph technology support for conceptual design in civil engineering
N2 - In: Advances in intelligent computing in engineering : proceedings of the 9.International EG-ICE Workshop ; Darmstadt, (01 - 03 August) 2002 / Martina Schnellenbach-Held ... (eds.) . - Düsseldorf: VDI-Verl., 2002 .- Fortschritt-Berichte VDI, Reihe 4, Bauingenieurwesen ; 180 ; S. 1-35 The paper describes a novel way to support conceptual design in civil engineering. The designer uses semantical tools guaranteeing certain internal structures of the design result but also the fulfillment of various constraints. Two different approaches and corresponding tools are discussed: (a) Visually specified tools with automatic code generation to determine a design structure as well as fixing various constraints a design has to obey. These tools are also valuable for design knowledge specialist. (b) Extensions of existing CAD tools to provide semantical knowledge to be used by an architect. It is sketched how these different tools can be combined in the future. The main part of the paper discusses the concepts and realization of two prototypes following the two above approaches. The paper especially discusses that specific graphs and the specification of their structure are useful for both tool realization projects.
KW - CAD
KW - CAD ;
KW - CAD
KW - civil engineering
Y1 - 2002
SN - 3-18-318004-9
ER -
TY - CHAP
A1 - Kraft, Bodo
T1 - Conceptual design tools for civil engineering
N2 - Applications of Graph Transformations with Industrial Relevance Lecture Notes in Computer Science, 2004, Volume 3062/2004, 434-439, DOI: http://dx.doi.org/10.1007/978-3-540-25959-6_33 This paper gives a brief overview of the tools we have developed to support conceptual design in civil engineering. Based on the UPGRADE framework, two applications, one for the knowledge engineer and another for architects allow to store domain specific knowledge and to use this knowledge during conceptual design. Consistency analyses check the design against the defined knowledge and inform the architect if rules are violated.
KW - CAD
KW - CAD
KW - Bauingenieurwesen
KW - CAD
KW - civil engineering
Y1 - 2004
ER -
TY - CHAP
A1 - Kraft, Bodo
A1 - Nagl, Manfred
T1 - Semantic tool support for conceptual design
N2 - ITCE-2003 - 4th Joint Symposium on Information Technology in Civil Engineering ed Flood, I., Seite 1-12, ASCE (CD-ROM), Nashville, USA In this paper we discussed graph based tools to support architects during the conceptual design phase. Conceptual Design is defined before constructive design; the used concepts are more abstract. We develop two graph based approaches, a topdown using the graph rewriting system PROGRES and a more industrially oriented approach, where we extend the CAD system ArchiCAD. In both approaches, knowledge can be defined by a knowledge engineer, in the top-down approach in the domain model graph, in the bottom-up approach in the in an XML file. The defined knowledge is used to incrementally check the sketch and to inform the architect about violations of the defined knowledge. Our goal is to discover design error as soon as possible and to support the architect to design buildings with consideration of conceptual knowledge.
KW - CAD
KW - CAD
KW - Bauingenieurwesen
KW - CAD
KW - civil engineering
Y1 - 2003
ER -
TY - CHAP
A1 - Kraft, Bodo
A1 - Wilhelms, N.
T1 - Interactive distributed knowledge support for conceptual building design
N2 - In: Net-distributed Co-operation : Xth International Conference on Computing in Civil and Building Engineering, Weimar, June 02 - 04, 2004 ; proceedings / [ed. by Karl Beuke ...] . - Weimar: Bauhaus-Univ. Weimar 2004. - 1. Aufl. . Seite 1-14 ISBN 3-86068-213-X International Conference on Computing in Civil and Building Engineering <10, 2004, Weimar> Summary In our project, we develop new tools for the conceptual design phase. During conceptual design, the coarse functionality and organization of a building is more important than a detailed worked out construction. We identify two roles, first the knowledge engineer who is responsible for knowledge definition and maintenance; second the architect who elaborates the conceptual de-sign. The tool for the knowledge engineer is based on graph technology, it is specified using PROGRES and the UPGRADE framework. The tools for the architect are integrated to the in-dustrial CAD tool ArchiCAD. Consistency between knowledge and conceptual design is en-sured by the constraint checker, another extension to ArchiCAD.
KW - CAD
KW - CAD
KW - Bauingenieurwesen
KW - CAD
KW - civil engineering
Y1 - 2004
SN - 3-86068-213-X
ER -
TY - JOUR
A1 - Kurowski, A.
A1 - Schultze, J.
A1 - Lüth, H.
A1 - Schöning, Michael Josef
T1 - Micro- and nanopatterning of sensor chips by means of macroporous silicon.
JF - Sensors and Actuators B. 83 (2002), H. 1-3
Y1 - 2002
SN - 0925-4005
N1 - Selected Papers from TRANSDUCERS '01 EUROSENSORS XV
SP - 123
EP - 128
ER -
TY - JOUR
A1 - Ermelenko, Y.
A1 - Yoshinobu, T.
A1 - Mourzina, Y.
A1 - Furuichi, K.
A1 - Levichev, S.
A1 - Vlasov, Y.
A1 - Schöning, Michael Josef
A1 - Iwasaki, H.
T1 - Lithium sensor based on the laser scanning semiconductor transducer
JF - Analytica Chimica Acta. 459 (2002), H. 1
Y1 - 2002
SN - 0378-4304
SP - 1
EP - 9
ER -
TY - JOUR
A1 - Schöning, Michael Josef
A1 - Schroth, Peter
A1 - Lüth, Hans
A1 - Hummel, Hans E.
A1 - Schütz, Stefan
T1 - Insect chemoreceptors coupled to silicon transistors as innovative biosensors
JF - Proceedings of SPIE. 4205 (2001)
Y1 - 2001
SP - 152
EP - 162
ER -
TY - JOUR
A1 - Schöning, Michael Josef
A1 - Schubert, Jürgen
A1 - Zander, Willy
A1 - Müller-Veggian, Mattea
T1 - Pulsed laser deposition as a novel preparation technique for chemical microsensors
JF - Proceedings of SPIE 3857, Chemical Microsenors and Applications II, 124 (November 18, 1999). 3857 (1999)
Y1 - 1999
SP - 124
EP - 134
ER -
TY - JOUR
A1 - Schöning, Michael Josef
A1 - Glück, O.
A1 - Kordos, P.
A1 - Lüth, H.
A1 - Emons, H.
T1 - Thin film electrodes for trace metal analysis by dc resistance changes
JF - Proceedings of SPIE. 3857 (1999)
Y1 - 1999
SP - 135
EP - 143
ER -
TY - JOUR
A1 - Schöning, Michael Josef
A1 - Thust, M.
A1 - Müller-Veggian, Mattea
A1 - Kordos, P.
T1 - A novel silicon-based sensor array with capacitive EIS structures
JF - Sensors and Actuators B. 47 (1998), H. 1-3
Y1 - 1998
SN - 0925-4005
SP - 225
EP - 230
ER -
TY - JOUR
A1 - Schöning, Michael Josef
A1 - Sauke, M.
A1 - Steffen, A.
A1 - Marso, M. (u.a.)
T1 - Ion-sensitive field-effect transistors with ultrathin Langmuir-Blodgett membranes
JF - Sensors and Actuators B. 27 (1995), H. 1-3
Y1 - 1995
SN - 0925-4005
SP - 325
EP - 328
ER -
TY - JOUR
A1 - Schöning, Michael Josef
A1 - Simonis, Anette
A1 - Ruge, Christian
A1 - Ecken, Holger
A1 - Müller-Veggian, Mattea
A1 - Lüth, Hans
T1 - A (bio-)chemical Field-effect Sensor with Macroporous Si as Substrate Material and a SiO₂ / LPCVD-Si₃N₄ Double Layer as pH Transducer
JF - Sensors. 2 (2002), H. 1
N2 - Macroporous silicon has been etched from n-type Si, using a vertical etching cell where no rear side contact on the silicon wafer is necessary. The resulting macropores have been characterised by means of Scanning Electron Microscopy (SEM). After etching, SiO₂ was thermally grown on the top of the porous silicon as an insulating layer and Si₃N₄ was deposited by means of Low Pressure Chemical Vapour Deposition (LPCVD) as transducer material to fabricate a capacitive pH sensor. In order to prepare porous biosensors, the enzyme penicillinase has been additionally immobilised inside the porous structure. Electrochemical measurements of the pH sensor and the biosensor with an Electrolyte/Insulator/Semiconductor (EIS) structure have been performed in the Capacitance/Voltage (C/V) and Constant capacitance (ConCap) mode.
Y1 - 2002
SN - 1424-8220
U6 - https://doi.org/10.3390/s20100011
SP - 11
EP - 22
ER -
TY - JOUR
A1 - Simonis, A.
A1 - Krings, T.
A1 - Lüth, H.
A1 - Wang, J.
A1 - Schöning, Michael Josef
T1 - A „hybrid“ thin-film pH sensor with integrated thick-film reference
JF - Sensors. 1 (2001), H. 6
Y1 - 2001
SN - 1424-8220
SP - 183
EP - 192
ER -
TY - JOUR
A1 - Schöning, Michael Josef
T1 - Microelectronics contacts (bio-)chemistry – Semiconductor-based sensors
JF - Biologi Italiani. 8 (2001)
Y1 - 2001
SN - 0392-2510
SP - 5
EP - 10
ER -
TY - JOUR
A1 - Artmann, Gerhard
A1 - Burns, Laura
A1 - Canaves, Jaume M.
A1 - Temiz Artmann, Aysegül
T1 - Circular dichroism spectra of human hemoglobin reveal a reversible structural transition at body temperature
JF - European Biophysics Journal. 33 (2004), H. 6
Y1 - 2004
SN - 1432-1017
SP - 490
EP - 496
ER -
TY - JOUR
A1 - Artmann, Gerhard
A1 - Shi, Young de
A1 - Agosti, R.
A1 - Longhini, E.
T1 - A modified casson equation to characterize blood rheology for hypertension. Shi, Young de; Artmann, Gerhard Michael; Agosti, R.; Longhini, E.
JF - Clinical Hemorheology Microcirculation. 19 (1998), H. 2
Y1 - 1998
SN - 1386-0291
SP - 115
EP - 127
ER -
TY - JOUR
A1 - Li, Anlan
A1 - Shi, Young de
A1 - Landsmann, B.
A1 - Schankowski-Bouvier, P.
A1 - Dikta, Gerhard
A1 - Bauer, U.
A1 - Artmann, Gerhard
T1 - Hemorheology and walking distance of Peripheral Arterial Occlusive Disease patients during treatment with Ginkgo-biloba extract
JF - Acta Pharmacologica Sinica = ZHONGUO YAOLI XUEBAO. 19 (1998), H. 5
Y1 - 1998
SN - 1745-7254
N1 - ISSN der parallelen Ausgabe 1671-4083; China-Zs.-Code: CN31-1347 abstract frei unter
SP - 417
EP - 421
ER -
TY - JOUR
A1 - Schöning, Michael Josef
A1 - Buß, G.
A1 - Lüth, H.
A1 - Schultze, J.W.
T1 - Modifications and characterization of a silicon-based microelectrode array
JF - Electrochimica Acta. 44 (1999), H. 21-22
Y1 - 1999
SN - 0013-4686
SP - 3899
EP - 3910
ER -