TY  - CHAP
A1  - Dielmann, Klaus-Peter
T1  - Umsetzung Strom-/Gasmarkt nach der Liberalisierung
N2  - Neues Energierecht Strom Neues Energierecht Gas Emissionshandel in Europa - ein interessanter Markt?
KW  - Energierecht
KW  - Elektrizität
KW  - Gas
KW  - Emissionshandel
Y1  - 2001
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Mund, F.
A1  - Raupach, Michael
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
T1  - Improvement of textile reinforced concrete by polymer additives
T2  - ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch
Y1  - 2004
SN  - 3-00-013706-8
SP  - 469
EP  - 476
PB  - BAM
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Barroso de Aguiar, Jose
ED  - Jalali, Said
ED  - Camoes, Aires
ED  - Ferrera, Rui Miguel
T1  - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles
T2  - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal
Y1  - 2006
SN  - 972-99179-1-4
SP  - 185
EP  - 192
PB  - Universidade do Minho, Departamento de Engenharia Civil
CY  - Guimarães
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Chudoba, Rostislav
A1  - Konrad, Martin
ED  - Triantafillou, T. C.
T1  - Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics
T2  - Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007
Y1  - 2007
SN  - 9608969107
SP  - 456
EP  - 457
PB  - Univ.
CY  - Patras
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Hegger, Josef
A1  - Voss, Stefan
ED  - Reinhardt, Hans W.
T1  - Load-bearing behaviour of polymer-impregnated textiles in concrete
T2  - Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)
Y1  - 2007
SN  - 978-2-35158-046-2
SP  - 183
EP  - 192
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Möller, M.
A1  - Weichhold, O.
ED  - Hegger, Josef
T1  - Application of polymers in textile reinforced concrete : from the interface to construction elements
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 55
EP  - 64
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Dinghofer, Kai
A1  - Hartung, Frank
T1  - Analysis of Criteria for the Selection of Machine Learning Frameworks
T2  - 2020 International Conference on Computing, Networking and Communications (ICNC)
N2  - With the many achievements of Machine Learning in the past years, it is likely that the sub-area of Deep Learning will continue to deliver major technological breakthroughs [1]. In order to achieve best results, it is important to know the various different Deep Learning frameworks and their respective properties. This paper provides a comparative overview of some of the most popular frameworks. First, the comparison methods and criteria are introduced and described with a focus on computer vision applications: Features and Uses are examined by evaluating papers and articles, Adoption and Popularity is determined by analyzing a data science study. Then, the frameworks TensorFlow, Keras, PyTorch and Caffe are compared based on the previously described criteria to highlight properties and differences. Advantages and disadvantages are compared, enabling researchers and developers to choose a framework according to their specific needs.
Y1  - 2020
U6  - https://doi.org/10.1109/ICNC47757.2020.9049650
N1  - 2020 International Conference on Computing, Networking and Communications (ICNC), 17-20 February 2020, Big Island, HI, USA
SP  - 373
EP  - 377
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Donner, Ralf
A1  - Rabel, Matthias
A1  - Scholl, Ingrid
A1  - Ferrein, Alexander
A1  - Donner, Marc
A1  - Geier, Andreas
A1  - John, André
A1  - Köhler, Christian
A1  - Varga, Sebastian
T1  - Die Extraktion bergbaulich relevanter Merkmale aus 3D-Punktwolken eines untertagetauglichen mobilen Multisensorsystems
T2  - Tagungsband Geomonitoring
Y1  - 2019
U6  - https://doi.org/10.15488/4515
SP  - 91
EP  - 110
ER  - 
TY  - CHAP
A1  - Dowidat, Linda
A1  - König, Johannes Alexander
A1  - Wolf, Martin
T1  - The motivational competence developing game framework
T2  - Mensch und Computer 2017 - Tagungsband
N2  - Competence Developing Games (CDGs) are a new concept of how to think about games with serious intentions. In order to emphasize on this topic, a new framework has been developed. It basically relies on learning and motivation theories. This ‘motivational Competence Developing Game Framework’ demonstrates how it is possible to use these theories in a CDG development process. The theoretical derivation and use of the framework is explained in this paper.
KW  - Competence Developing Games
KW  - Serious Games
KW  - Gamification
KW  - motivation theories
KW  - learning theories
Y1  - 2017
U6  - https://doi.org/10.18420/muc2017-mci-0130
SP  - 15
EP  - 26
PB  - Gesellschaft für Informatik e.V.
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Droszez, Anna
A1  - Sanno, Maximilian
A1  - Goldmann, Jan-Peter
A1  - Albracht, Kirsten
A1  - Brüggemann, Gerd-Peter
A1  - Braunstein, Bjoern
T1  - Differences between take-off behavior during vertical jumps and two artistic elements
T2  - 34th International Conference of Biomechanics in Sport, Tsukuba, Japan, July 18-22, 2016
Y1  - 2016
SN  - 1999-4168
SP  - 577
EP  - 580
ER  - 
TY  - CHAP
A1  - Drumm, Christian
A1  - Lemcke, Jens
A1  - Oberle, Daniel
T1  - Integrating Semantic Web Services and Business Process Management: A Real Use Case
T2  - Proceedings of the ESWC 2006 Workshop Semantics for Business Process Management 2006 (SBPM 2006), June 2006
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Drumm, Christian
A1  - Schmitt, Matthias
A1  - Do, Hong-Hai
A1  - Rahm, Erhard
T1  - Quickmig: automatic schema matching for data migration projects
T2  - Proceedings of the 2007 ACM Conference on Information and Knowledge Management / CIKM'07, Lisboa, Portugal, Nov. 6 - 10, 2007
Y1  - 2007
SN  - 978-1-59593-803-9
U6  - https://doi.org/10.1145/1321440.1321458
SP  - 107
EP  - 116
ER  - 
TY  - CHAP
A1  - Duffner, Markus
A1  - Moorkamp, Wilfried
A1  - Peterson, Leif Arne
A1  - Uibel, Thomas
ED  - Kuhlmann, Ulrike
T1  - Untersuchungen zur Tragfähigkeit und Steifigkeit eines neuartigen Wandelements in Holzbauweisen
T2  - Doktorandenkolloquium Holzbau Forschung + Praxis : Stuttgart, 08./09. März 2018
Y1  - 2018
SP  - 131
EP  - 139
PB  - Universität Stuttgart, Institut für Konstruktion und Entwurf
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, N. H.
A1  - Staat, Manfred
T1  - Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Hunyh
A1  - Staat, Manfred
T1  - Finite Element Implementation of a 3D Fung-type Model
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Numerical stability enhancement of modeling hyperelastic materials
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Duprat, J.
A1  - Dachwald, Bernd
A1  - Hilchenbach, M.
A1  - Engrand, Cecile
A1  - Espe, C.
A1  - Feldmann, M.
A1  - Francke, G.
A1  - Görög, Mark
A1  - Lüsing, N.
A1  - Langenhorst, Falko
T1  - The MARVIN project: a micrometeorite harvester in Antarctic snow
T2  - 44th Lunar and Planetary Science Conference
N2  - MARVIN is an automated drilling and melting probe dedicated to collect pristine interplanetary dust particles (micrometeorites) from central Antarctica snow.
Y1  - 2013
N1  - 44th Lunar and Planetary Science Conference, March 18-22, 2013, The Woodlands, Texas
ER  - 
TY  - CHAP
A1  - Duran Paredes, Ludwin
A1  - Mottaghy, Darius
A1  - Herrmann, Ulf
A1  - Groß, Rolf Fritz
T1  - Online ground temperature and soil moisture monitoring of a shallow geothermal system with non-conventional components
T2  - EGU General Assembly 2020
N2  - We present first results from a newly developed monitoring station for a closed loop geothermal heat pump test installation at our campus, consisting of helix coils and plate heat exchangers, as well as an ice-store system. There are more than 40 temperature sensors and several soil moisture content sensors distributed around the system, allowing a detailed monitoring under different operating conditions.In the view of the modern development of renewable energies along with the newly concepts known as Internet of Things and Industry 4.0 (high-tech strategy from the German government), we created a user-friendly web application, which will connect the things (sensors) with the open network (www). Besides other advantages, this allows a continuous remote monitoring of the data from the numerous sensors at an arbitrary sampling rate.Based on the recorded data, we will also present first results from numerical simulations, taking into account all relevant heat transport processes.The aim is to improve the understanding of these processes and their influence on the thermal behavior of shallow geothermal systems in the unsaturated zone. This will in turn facilitate the prediction of the performance of these systems and therefore yield an improvement in their dimensioning when designing a specific shallow geothermal installation.
Y1  - 2020
N1  - EGU General Assembly 2020, Online, 4–8 May 2020
ER  - 
TY  - CHAP
A1  - Dylla, Frank
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - AllemaniACs 2003 team description
T2  - RoboCup 2003 : Robot Soccer World Cup VII
Y1  - 2003
SP  - 1
EP  - 3
ER  - 
TY  - CHAP
A1  - Dören, Horst-Peter
T1  - The examination of surfaces of cold rolled wire for gas-shielded arc-welding
T2  - WAI/BISPA joint conference : proceedings. Joint conference of Wire Association International and the British Independent Steel Producers Association (WAI/BISPA) : 26 - 27. 09. 1988, Stratford-upon-Avon
Y1  - 1988
SP  - 102
EP  - 112
CY  - Guilford, Conn.
ER  - 
TY  - CHAP
A1  - Dören, Horst-Peter
A1  - Kröschel, R.
ED  - Dilthey, Ulrich
T1  - Plasma-Spritzen
T2  - Schweisszusatzwerkstoffe : Fortschritte, Erfahrungen, Tendenzen. 2. Aachener Schweisstechnik-Kolloquium, 7. bis 8. März 1991
Y1  - 1991
SN  - 3-18-140802-6
SP  - 147
EP  - 167
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Dören, Horst-Peter
A1  - Lohrmann, G. R.
A1  - Wernicke, K.
T1  - Plasma-Auftragschweißen mit Metallpulvern und Einsatzmöglichkeiten in der Kerntechnik
T2  - Schweissen in der Kerntechnik : Vorträge : internationales Kolloquium. 5 = Welding in nuclear engineering: international conference. 5 = Le soudage dans la technique nucleaire: colloque international. 5 : Nürnberg, 26.11.86-28.11.86. DVS-Berichte. Bd. 106
Y1  - 1986
SN  - 3-87155-411-1
SP  - 129
EP  - 133
PB  - Dt. Verl. für Schweißtechnik
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Dören, Horst-Peter
A1  - Molitor, M.
A1  - Ertl, Karl-Heinz
ED  - Lugscheider, Erich
T1  - Problematik der Härtemessung an pulverflammgespritzten Verschleißschutzschichten mit Hilfe mobiler, dynamischer Härteprüfverfahren
T2  - Thermische Spritzkonferenz : TS 96 ; Vorträge und Posterbeiträge. Essen 6. bis 8. März 1996. DVS-Berichte. Bd. 175
Y1  - 1996
SN  - 3-87155-480-4
SP  - 249
EP  - 254
PB  - DVS-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Dören, Horst-Peter
A1  - Wernicke, K.
T1  - Auftragen von verschleißfesten stranggegossenen Hartlegierungen auf Kobaltbasis durch das WIG- und Gasschweißen
T2  - Schweißen und Schneiden '83 = Welding and Cutting '83. Vorträge der Großen Schweißtechnischen Tagung in Aachen vom 28. bis 30. September 1983. Veranst.: Deutscher Verband für Schweißtechnik (DVS). DVS-Berichte. 83
Y1  - 1983
SN  - 3-87155-388-3
SP  - 109
EP  - 113
PB  - Dt. Verl. für Schweißtechnik
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Feldmann, Markus
A1  - Kuhnhenne, Markus
T1  - An innovative thermally activated light-weight steel deck system - numerical investigations and practical tests
T2  - Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings
Y1  - 2007
SN  - 978-952-99898-2-9
SP  - 1
EP  - 8
CY  - Helsinki
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Feldmann, Markus
A1  - Kuhnhenne, Markus
A1  - Hellberg, Jan
T1  - Implementing a thermal activation system into a light-weight steel deck element
T2  - Eurosteel 2008 : 5th European Conference on Steel and Composite Structures ; research, practice, new materials ; 3rd to 5th September 2008, Graz, Austria / ed. by Robert Ofner ...
Y1  - 2008
SN  - 92-0147-000-90
SP  - 941
EP  - 946
PB  - ECCS, European Convention for Construction Steelwork
CY  - Brussels
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Kuhnhenne, Markus
A1  - Feldmann, Markus
T1  - Floor systems - key elements for sustainable multi-storey buildings
T2  - SB11 Helsinki World Sustainable Building Conference : 18. - 21.10.2011
Y1  - 2011
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Sedlacek, Gerhard
T1  - Improvement of thermal comfort in light weight buildings made of steel with new concepts for slab systems
T2  - 10th Nordic Steel Construction Conference, Copenhagen, Denmark 7-9. June 2004: NSCC 2004 : proceedings
Y1  - 2004
SP  - 35
EP  - 44
PB  - Danish Steel Inst.
CY  - Copenhagen
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Ziller, Claudia
A1  - Hortmanns, M.
T1  - Ventilation of double facades by external dynamic wind pressure
T2  - 11th International Conference on Wind Engineering. 1
Y1  - 2003
SP  - 721
EP  - 730
PB  - The Wind Science and Engineering Research Center
CY  - Lubbock, Tex.
ER  - 
TY  - CHAP
A1  - Dümmler, Andreas
A1  - Oetringer, Kerstin
A1  - Göttsche, Joachim
T1  - Auslegungstool zur energieeffizienten Kühlung von Gebäuden
T2  - DKV-Tagung 2020, AA IV
N2  - Thematisch widmet sich das Projekt Coolplan- AIR der Fortentwicklung und Feldvalidierung eines Berechnungs-  und Auslegungstools zur energieeffizienten Kühlung von Gebäuden mit luftgestützten Systemen. Neben dem Aufbau und der Weiterentwicklung von Simulationsmodellen erfolgen Vermessungen der Gesamtsysteme anhand von Praxisanlagen im Feld. Der Schwerpunkt des Projekts liegt auf der Vermessung, Simulation und Integration rein luftgestützter Kühltechnologien. Im Bereich der Kälteerzeugung wurden Luft‐ Luft‐ Wärmepumpen, Anlagen zur adiabaten Kühlung bzw. offene Kühltürme und VRF‐ Multisplit‐ Systeme (Variable Refrigerant Flow) im Feld bzw. auf dem Teststand der HSD vermessen. Die Komponentenmodelle werden in die Matlab/Simulink‐ Toolbox CARNOT integriert und anschließend auf Basis der zuvor erhaltenen Messdaten validiert.
Einerseits erlauben die Messungen das Betriebsverhalten von Anlagenkomponenten zu analysieren. Andererseits soll mit der Vermessung im Feld geprüft werden, inwieweit die Simulationsmodelle, welche im Vorgängerprojekt aus Prüfstandmessungen entwickelt wurden, auch für größere Geräteleistungen Gültigkeit besitzen. Die entwickelten und implementierten Systeme, bestehend aus verschiedensten Anlagenmodellen und Regelungskomponenten, werden geprüft und dahingehend qualifiziert, dass sie in Standard-  Auslegungstools zuverlässig verwendet werden können.
Zusätzlich wird ein energetisches Monitoring eines Hörsaalgebäudes am Campus Jülich durchgeführt, das u. a. zur Validierung der Kühllastberechnungen in gängigen Simulationsmodelle genutzt werden kann.
Y1  - 2020
N1  - Deutsche Kälte- und Klimatagung, 19-20 November 2020, online
SP  - 1109
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sesov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - Boundary effects on seismic analysis of multi-storey frames considering soil structure interaction phenomenon
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed
Y1  - 2014
SN  - 978-3-658-02809-1 (Print) ; 978-3-658-02810-7
U6  - https://doi.org/10.1007/978-3-658-02810-7_47
SP  - 569
EP  - 576
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sheshov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - New coupled finite-infinite element approach for wave propagation simulation of unbounded soil media
T2  - 2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 2
Y1  - 2014
SN  - 978-1-5108-1021-1
SP  - 1556
EP  - 1561
PB  - Curran Associates, Inc.
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
T1  - Understanding the acceptance of smart home-based insurances
T2  - Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm & Uppsala, Sweden, June 8-14, 2019
Y1  - 2019
SN  - 978-1-7336325-0-8
SP  - 1
EP  - 15
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
A1  - Chwallek, Constanze
A1  - Wollf, Frederik
T1  - The role of environmental factors for the success of digital start-ups
T2  - ECIS 2022 Research Papers
N2  - Digital start-ups are perceived as an engine for innovation and job promotor. While success factors for non-IT start-ups have already been extensively researched, this study sheds light on digital entrepreneurs, whose business model relies primarily on services based on digital technologies. Applying the Grounded Theory method, we identify relevant environmental success factors for digital entrepreneurs. The study’s research contribution is threefold. First, we provide 16 relevant and less relevant environmental success factors, which enables a comparison with prior identified factors. We found out that several prior environmental success factors, such as accessibility to transportation or the availability of land and facilities are less relevant for a digital entrepreneur. Second, we derive and discuss hypotheses for the influence of these factors on digital start-up success. Third, we present a theoretical model that lays the foundation for explaining the environmental influence on digital
entrepreneurship success.
KW  - Digital start-up
KW  - Entrepreneurship
KW  - Success Factors
KW  - Environment
KW  - Grounded Theory
Y1  - 2022
N1  - Thirtieth European Conference on Information Systems (ECIS 2022), 18.06.2022 - 24.06.2022, Timișoara, Romania.
Paper Number 1045
SP  - 1
EP  - 16
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
A1  - Dyong, Julian
T1  - Applying process mining in small and medium sized IT enterprises – challenges and guidelines
T2  - Business Process Management, 20th International Conference, BPM 2022, Proceedings
N2  - Process mining gets more and more attention even outside large enterprises and can be a major benefit for small and medium sized enterprises (SMEs) to gain competitive advantages. Applying process mining is challenging, particularly for SMEs because they have less resources and process maturity. So far, IS researchers analyzed process mining challenges with a focus on larger companies. This paper investigates the application of process mining by means of a case study and sheds light into the particular challenges of an IT SME. The results reveal 13 SME process mining challenges and seven guidelines to address them. In this way, the paper contributes to the understanding of process mining application in SME and shows similarities and differences to larger companies.
KW  - Process mining
KW  - Challenges
KW  - Guidelines
KW  - SME
KW  - Case Study
Y1  - 2022
SN  - 978-3-031-16103-2
U6  - https://doi.org/10.1007/978-3-031-16103-2_11
N1  - International Conference on Business Process Management (BPM 2022), Münster, Germany, Sept. 11-16, 2022
SP  - 125
EP  - 142
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
A1  - Edelbauer, Thomas Rudolf
T1  - Gamified Information Systems for Assisted Living Facilities - Relevant Design Guidelines, Affordances and Adoption Barriers
N2  - Gamification and gamified information systems (GIS) apply video game elements to encourage the work on boring and everyday tasks. Meanwhile, several research works provide evidence that gamification increases efficiency and effectivity of such tasks. The paper at hand investigates the health care sector, which is challenged with cost pressure and suffers in process efficiency. We hypothesize that GIS may improve the efficiency and quality of care processes. By applying an interview-based content analysis, the paper at hand evaluates gamification elements in an assisted living environment and provides three research contributions. First, insights into relevant GIS affordances and application examples for assisted living facilities are given. Second, assisted living experts evaluate GIS design guidelines. Both the relevant affordances and design principles comprise a basis for the development of a GIS for social workers in assisted living facilities. Third, potential adoption barriers and design guidelines for GIS in assisted living are presented.
Y1  - 2020
U6  - https://doi.org/10.30844/wi_2020_f3-eggert
N1  - 15. Internationale Tagung zur Wirtschaftsinformatik, 09. – 11.03.2020, Potsdam
PB  - GITO
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
A1  - Kriska, Melina
T1  - Gamification for software development processes – relevant affordances and design principles
T2  - Proceedings of the 55th Hawaii International Conference on System Sciences
N2  - A Gamified Information System (GIS) implements game concepts and elements, such as affordances and game design principles to motivate people. Based on the idea to develop a GIS to increase the motivation of software developers to perform software quality tasks, the research work at hand aims at investigating relevant requirements from that target group. Therefore, 14 interviews with software development experts are conducted and analyzed. According to the results, software developers prefer the affordances points, narrative storytelling in a multiplayer and a round-based setting. Furthermore, six design principles for the development of a GIS are derived.
Y1  - 2022
SN  - 978-0-9981331-5-7
U6  - https://doi.org/10.24251/HICSS.2022.200
N1  - Hawaii International Conference on System Sciences (HICSS) 2022, 04.01.2022 – 07.01.2022
SP  - 1614
EP  - 1623
PB  - HICSS Publishing
CY  - Honolulu
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
A1  - Schade, Maximilian
A1  - Bröhl, Florian
A1  - Moriz, Alexander
ED  - Mandviwalla, Munir
ED  - Söllner, Matthias
ED  - Tuunanen, Tuure
T1  - Generating synthetic LiDAR point cloud data for object detection using the Unreal Game Engine
T2  - Design Science Research for a Resilient Future (DESRIST 2024)
N2  - Object detection based on artificial intelligence is ubiquitous in today’s computer vision research and application. The training of the neural networks for object detection requires large and high-quality datasets. Besides datasets based on image data, datasets derived from point clouds offer several advantages. However, training datasets are sparse and their generation requires a lot of effort, especially in industrial domains. A solution to this issue offers the generation of synthetic point cloud data. Based on the design science research method, the work at hand proposes an approach and its instantiation for generating synthetic point cloud data based on the Unreal Engine. The point cloud quality is evaluated by comparing the synthetic cloud to a real-world point cloud. Within a practical example the applicability of the Unreal Game engine for synthetic point cloud generation could be successfully demonstrated.
Y1  - 2024
SN  - 978-3-031-61174-2 (Print)
SN  - 978-3-031-61175-9 (Online)
U6  - https://doi.org/10.1007/978-3-031-61175-9_20
N1  - 19th International Conference on Design Science Research in Information Systems and Technology, DESRIST 2024, Trollhättan, Sweden, June 3–5, 2024
SP  - 295
EP  - 309
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
A1  - Stanke, Max-Alexander
T1  - Adoption of Integrated Voice Assistants in Health Care– Requirements and Design Guidelines
N2  - Integrated voice assistants (IVA) receive more and more attention and are widespread for entertainment use cases, such as radio hearing or web searches. At the same time, the health care segment suffers in process inefficiency and missing staff, whereas the usage of IVA has the potential to improve caring processes and patient satisfaction. By applying a design science approach and based on a qualitative study, we identify IVA requirements, barriers and design guidelines for the health care sector. The results reveal three important IVA functions: the ability to set appointments with care service staff, the documentation of health history and the communication with service staff. Integration, system stability and volume control are the most important nonfunctional requirements. Based on the interview results and project experiences, six design and implementation guidelines are derived.
Y1  - 2020
U6  - https://doi.org/10.30844/wi_2020_k2-eggert
N1  - 15. Internationale Tagung zur Wirtschaftsinformatik, 09. – 11.03.2020, Potsdam
PB  - GITO
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
A1  - Weber, Jannik
T1  - What drives the purchase decision in Instagram stores?
T2  - ECIS 2023 Research Papers
N2  - The popularity of social media and particularly Instagram grows steadily. People use the different platforms to share pictures as well as videos and to communicate with friends. The potential of social media platforms is also being used for marketing purposes and for selling products. While for Facebook and other online social media platforms the purchase decision factors are investigated several times, Instagram stores remain mainly unattended so far. The present research work closes this gap and sheds light into decisive factors for purchasing products offered in Instagram stores. A theoretical research model, which contains selected constructs that are assumed to have a significant influence on Instagram user´s purchase intention, is developed. The hypotheses are evaluated by applying structural equation modelling on survey data containing 127 relevant participants. The results of the study reveal that ‘trust’, ‘personal recommendation’, and ‘usability’ significantly influences user’s buying intention in Instagram stores.
KW  - Instagram store
KW  - shopping behavior
KW  - purchase factor
KW  - PLS
KW  - structural equation model
Y1  - 2023
N1  - ECIS 2023, European Conference on Information Systems, Kristiansand, Norway, June 11.-16.
SP  - 1
EP  - 17
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
A1  - Winkelmann, Axel
A1  - Lohmann, Patrick
A1  - Knackstedt, Ralf
T1  - The Regulatory Influence On Management Information Systems - A Contingency Perspective
T2  - ECIS 2013 Completed Research. 9
Y1  - 2013
N1  - Proceedings of the 21st European Conference on Information Systems
ER  - 
TY  - CHAP
A1  - Eichenbaum, Julian
A1  - Nikolovski, Gjorgji
A1  - Mülhens, Leon
A1  - Reke, Michael
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - Towards a lifelong mapping approach using Lanelet 2 for autonomous open-pit mine operations
T2  - 2023 IEEE 19th International Conference on Automation Science and Engineering (CASE)
N2  - Autonomous agents require rich environment models for fulfilling their missions. High-definition maps are a well-established map format which allows for representing semantic information besides the usual geometric information of the environment. These are, for instance, road shapes, road markings, traffic signs or barriers. The geometric resolution of HD maps can be as precise as of centimetre level. In this paper, we report on our approach of using HD maps as a map representation for autonomous load-haul-dump vehicles in open-pit mining operations. As the mine undergoes constant change, we also need to constantly update the map. Therefore, we follow a lifelong mapping approach for updating the HD maps based on camera-based object detection and GPS data. We show our mapping algorithm based on the Lanelet 2 map format and show our integration with the navigation stack of the Robot Operating System. We present experimental results on our lifelong mapping approach from a real open-pit mine.
Y1  - 2023
SN  - 979-8-3503-2069-5 (Online)
SN  - 979-8-3503-2070-1 (Print)
U6  - https://doi.org/10.1109/CASE56687.2023.10260526
N1  - 19th International Conference on Automation Science and Engineering (CASE), 26-30 August 2023, Auckland, New Zealand.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Eichler, Fabian
A1  - Skupin, Marco
A1  - Thurn, Laura
A1  - Kasch, Susanne
A1  - Schmidt, Thomas
T1  - Operating limits for beam melting of glass materials
T2  - Modern Technologies in Manufacturing (MTeM 2019)
N2  - Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.
Y1  - 2019
U6  - https://doi.org/10.1051/matecconf/201929901004
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01004
ER  - 
TY  - CHAP
A1  - El Moussaoui, Noureddine
A1  - Kassmi, Khalil
A1  - Alexopoulos, Spiros
A1  - Schwarzer, Klemens
A1  - Chayeb, Hamid
A1  - Bachiri, Najib
T1  - Simulation studies on a new innovative design of a hybrid solar distiller MSDH alimented with a thermal and photovoltaic energy
T2  - Materialstoday: Proceedings
N2  - In this paper, we present the structure, the simulation the operation of a multi-stage, hybrid solar desalination system (MSDH), powered by thermal and photovoltaic (PV) (MSDH) energy. The MSDH system consists of a lower basin, eight horizontal stages, a field of four flat thermal collectors with a total area of 8.4 m2, 3 Kw PV panels and solar batteries. During the day the system is heated by thermal energy, and at night by heating resistors, powered by solar batteries. These batteries are charged by the photovoltaic panels during the day. More specifically, during the day and at night, we analyse the temperature of the stages and the production of distilled water according to the solar irradiation intensity and the electric heating power, supplied by the solar batteries. The simulations were carried out in the meteorological conditions of the winter month (February 2020), presenting intensities of irradiance and ambient temperature reaching 824 W/m2 and 23 °C respectively. The results obtained show that during the day the system is heated by the thermal collectors, the temperature of the stages and the quantity of water produced reach 80 °C and 30 Kg respectively. At night, from 6p.m. the system is heated by the electric energy stored in the batteries, the temperature of the stages and the quantity of water produced reach respectively 90 °C and 104 Kg for an electric heating power of 2 Kw. Moreover, when the electric power varies from 1 Kw to 3 Kw the quantity of water produced varies from 92 Kg to 134 Kg. The analysis of these results and their comparison with conventional solar thermal desalination systems shows a clear improvement both in the heating of the stages, by 10%, and in the quantity of water produced by a factor of 3.
Y1  - 2021
U6  - https://doi.org/10.1016/j.matpr.2021.03.115
SN  - 2214-7853
N1  - The Fourth edition of the International Conference on Materials & Environmental Science (ICMES 2020), virtual conference, November 18-28, 2020, Morocco
VL  - 45
IS  - 8
SP  - 7653
EP  - 7660
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - El-Deib, Khaled
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
A1  - Könke, Carsten
A1  - Bettzieche, Volker
T1  - Safety assessment of rockfill and masonry dams
T2  - Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ... Vol. 1
Y1  - 2002
SN  - 90-5809-510-X
SP  - 237
EP  - 242
PB  - Balkema
CY  - Lisse
ER  - 
TY  - CHAP
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Hot S-Parameter Measurement System for Plasma and Magnetron Applications
T2  - Proceedings of the 2020 German Microwave Conference
N2  - This paper presents the design, development and calibration procedures of a novel hot S-parameter measurement system for plasma and magnetron applications with power level up to 6 kW. Based on a vector network analyzer, a power amplifier and two directional couplers, the input matching hotS 11 and transmission hotS 21 of the device under test are measured at 2.45 GHz center frequency and 300MHz bandwidth, while the device is driven by the magnetron. This measurement system opens a new horizon to develop many new industrial applications such as microwave plasma jets, dryer systems, dryers and so forth. Furthermore, the developing, controlling and monitoring a 2kW 2.45GHz plasma jet and a dryer system using the measurement system are presented and explained.
Y1  - 2020
SN  - 978-3-9820397-1-8
N1  - 13th German Microwave Conference 2020, March 09–11, Cottbus
SP  - 124
EP  - 127
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Ellerweg, Roland
A1  - Ritz, Thomas
ED  - Roth, Jörg
T1  - Tool supported requirements analysis for the user centered development of mobile enterprise software
T2  - Proceeding of Wireless Applications and Computing 2008 and Telecommunications, Networks and Systems 2008 : MCCSIS '08 ; IADIS Multi Conference on Computer Science and Information Systems ; 22 - 24 July 2008, Amsterdam, The Netherlands
N2  - A user centered development method has proved satisfactory for the development of mobile enterprise software. To make use of this method, detailed information about the user and the place where the user interacts with his mobile device is required. This article describes how both can be modeled by a stereotypical and conceptual extended UML extension. Finally, a software tool is presented that supports the developed UML extension.
Y1  - 2008
SN  - 978-972-8924-62-1
SP  - 160
EP  - 162
PB  - IADIS Press
CY  - [Lisboa]
ER  - 
TY  - CHAP
A1  - Elsen, Ingo
T1  - A pixel based approach to view based object recognition with self-organizing neural networks
T2  - IECON'98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society
N2  - This paper addresses the pixel based classification of three dimensional objects from arbitrary views. To perform this task a coding strategy, inspired by the biological model of human vision, for pixel data is described. The coding strategy ensures that the input data is invariant against shift, scale and rotation of the object in the input domain. The image data is used as input to a class of self organizing neural networks, the Kohonen-maps or self-organizing feature maps (SOFM). To verify this approach two test sets have been generated: the first set, consisting of artificially generated images, is used to examine the classification properties of the SOFMs; the second test set examines the clustering capabilities of the SOFM when real world image data is applied to the network after it has been preprocessed to be invariant against shift, scale and rotation. It is shown that the clustering capability of the SOFM is strongly dependant on the invariance coding of the images.
Y1  - 1998
SN  - 0-7803-4503-7
U6  - https://doi.org/10.1109/IECON.1998.724032
N1  - Aachen, 31 August 1998 - 04 September 1998
SP  - 2040
EP  - 2044
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Elsen, Ingo
A1  - Hawari, Asma
A1  - Johnen, Uwe
ED  - Pietsch, Wolfram
ED  - Krams, Benedikt
T1  - Produktkernel in der Systemintegration (Erfahrungsbericht aus der Praxis)
T2  - Vom Projekt zum Produkt - Fachtagung des GI-Fachausschusses Management der Anwendungsentwicklung und -wartung im Fachbereich Wirtschaftsinformatik (WI-MAW), 1. - 3. Dezember 2010 in Aachen
N2  - In der Vergangenheit basierten große Systemintegrationsprojekte in der Regel auf Individualentwicklungen für einzelne Kunden. Getrieben durch Kostendruck steigt aber der Bedarf nach standardisierten Lösungen, die gleichzeitig die individuellen Anforderungen des jeweiligen Umfelds berücksichtigen. T-Systems GEI GmbH wird beiden Anforderungen mit Produktkerneln gerecht. Neben den technischen Aspekten der Kernelentwicklung spielen besonders organisatorische Aspekte eine Rolle, um Kernel effizient und qualitativ hochwertig zu entwickeln, ohne deren Funktionalitäten ins Uferlose wachsen zu lassen. Umgesetzt hat T-Systems dieses Konzept für Flughafeninformationssysteme. Damit kann dem wachsenden Bedarf der Flughafenbetreiber nach einer effizienten und kostengünstigen Softwarelösung zur Unterstützung Ihrer Geschäftsprozesse entsprochen werden.
Y1  - 2010
SN  - 9783885792727
SN  - 1617-5468
SP  - 93
EP  - 102
PB  - Gesellschaft für Informatik eV
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Elsen, Ingo
A1  - Kraiss, Karl-Friedrich
A1  - Krumbiegel, Dirk
T1  - Pixel based 3D object recognition with bidirectional associative memories
T2  - International Conference on Neural Networks 1997
N2  - This paper addresses the pixel based recognition of 3D objects with bidirectional associative memories. Computational power and memory requirements for this approach are identified and compared to the performance of current computer architectures by benchmarking different processors. It is shown, that the performance of special purpose hardware, like neurocomputers, is between one and two orders of magnitude higher than the performance of mainstream hardware. On the other hand, the calculation of small neural networks is performed more efficiently on mainstream processors. Based on these results a novel concept is developed, which is tailored for the efficient calculation of bidirectional associative memories. The computational efficiency is further enhanced by the application of algorithms and storage techniques which are matched to characteristics of the application at hand.
Y1  - 1997
SN  - 0-7803-4122-8
N1  - June 9 - 12, 1997, Westin Galleria Hotel Houston, Texas, USA.
SP  - 1679
EP  - 1684
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Elsen, Ingo
A1  - Schmalzbauer, Michael
ED  - Reussner, Ralf
ED  - Grund, Matthias
ED  - Andreas, Oberweis
ED  - Tichy, Walter
T1  - Messsystematik zur Steuerung der Produkt- und Prozessqualität in Systemintegrationsprojekten – ein Erfahrungsbericht
T2  - Software Engineering 2011 - Fachtagung des GI-Fachbereichs Softwaretechnik, 21. - 25. Februar 2011 in Karlsruhe
N2  - Der Erfolg eines Softwarenentwicklungsprojektes insbesondere eines Systemintegrationsprojektes wird mit der Erfüllung des „Teufelsdreiecks“, „In-Time“, „In-Budget“, „In-Quality“ gemessen. Hierzu ist die Kenntnis der Software- und Prozessqualität essenziell, um die Einhaltung der Qualitätskriterien festzustellen, aber auch, um eine Vorhersage hinsichtlich Termin- und Budgettreue zu treffen. Zu diesem Zweck wurde in der T-Systems Systems Integration ein System aus verschiedenen Key Performance Indikatoren entworfen und in der Organisation implementiert, das genau das leistet und die Kriterien für CMMI Level 3 erfüllt.
Y1  - 2011
SN  - 9783885792772
SN  - 1617-5468
PB  - Gesellschaft für Informatik eV
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Eltester, Niklas Sebastian
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - A smart factory setup based on the RoboCup logistics league
T2  - 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)
N2  - In this paper we present SMART-FACTORY, a setup for a research and teaching facility in industrial robotics that is based on the RoboCup Logistics League. It is driven by the need for developing and applying solutions for digital production. Digitization receives constantly increasing attention in many areas, especially in industry. The common theme is to make things smart by using intelligent computer technology. Especially in the last decade there have been many attempts to improve existing processes in factories, for example, in production logistics, also with deploying cyber-physical systems. An initiative that explores challenges and opportunities for robots in such a setting is the RoboCup Logistics League. Since its foundation in 2012 it is an international effort for research and education in an intra-warehouse logistics scenario. During seven years of competition a lot of knowledge and experience regarding autonomous robots was gained. This knowledge and experience shall provide the basis for further research in challenges of future production. The focus of our SMART-FACTORY is to create a stimulating environment for research on logistics robotics, for teaching activities in computer science and electrical engineering programmes as well as for industrial users to study and explore the feasibility of future technologies. Building on a very successful history in the RoboCup Logistics League we aim to provide stakeholders with a dedicated facility oriented at their individual needs.
Y1  - 2020
U6  - https://doi.org/10.1109/ICPS48405.2020.9274766
N1  - 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS), 10-12 June 2020, Tampere, Finland.
SP  - 297
EP  - 302
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Endress, Tim
A1  - Bragard, Michael
T1  - Recording of efficiency-maps of low-power electric drive systems using a flexible matlab-based test bench
T2  - 2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)
N2  - This paper introduces a hardware setup to measure efficiency maps of low-power electric motors and their associated inverters. Here, the power of the device under test (DUT) ranges from some Watts to a few hundred Watts. The torque and speed of the DUT are measured independent of voltage and current in multiple load points. A Matlab-based software approach in combination with an open Texas-Instruments (TI) hardware setup ensures flexibility. Exemplarily, the efficiency field of a Permanent Magnet Synchronous Machine (PMSM) is measured to proof the concept. Brushless-DC (BLDC) motors can be tested as well. The nomenclature in this paper is based on the new European standard DIN EN 50598. Special attention is paid to the calculation of the measurement error.
Y1  - 2017
SN  - 978-1-5386-3846-0
U6  - https://doi.org/10.1109/RTUCON.2017.8124775
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Engel, M.
A1  - Thieringer, J.
A1  - Tippkötter, Nils
T1  - Microbial electrosynthesis for sustainable biobutanol production
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 77
EP  - 78
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Engel, Mareike
A1  - Thieringer, Julia
A1  - Tippkötter, Nils
T1  - Linking bioprocess engineering and electrochemistry for sustainable biofuel production
T2  - Young Researchers Symposium, YRS 2016. Proceedings
N2  - Electromicrobial engineering is an emerging, highly interdisciplinary research area linking bioprocesses with electrochemistry. In this work, microbial electrosynthesis (MES) of biobutanol is carried out during acetone-butanol-ethanol (ABE) fermentations with Clostridium acetobutylicum. A constant electric potential of −600mV (vs. Ag/AgCl) with simultaneous addition of the soluble redox mediator neutral red is used in order to study the electron transfer between the working electrode and the bacterial cells. The results show an earlier initiation of solvent production for all fermentations with applied potential compared to the conventional ABE fermentation. The f inal butanol concentration can be more than doubled by the application of a negative potential combined with addition of neutral red. Moreover a higher biofilm formation on the working electrode compared to control cultivations has been observed. In contrast to previous studies, our results also indicate that direct electron transfer (DET) might be possible with C. acetobutylicum. The presented results make microbial butanol production economically attractive and therefore support the development of sustainable production processes in the chemical industry aspired by the “Centre for resource-efficient chemistry and raw material change” as well as the the project “NanoKat” working on nanostructured catalysts in Kaiserslautern.
Y1  - 2016
N1  - Young Researchers Symposium, YRS 2016, 14th - 15th April 2016, Fraunhofer-Zentrum Kaiserslautern
SP  - 49
EP  - 53
PB  - Fraunhofer Verlag
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Engels, Elmar
T1  - Industrieantriebe mit sercos Schnittstelle über MATLAB steuern
T2  - Tagungsband AALE 2013 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 10. Fachkonferenz, Stralsund
Y1  - 2013
SN  - 978-3-8356-3364-3
SP  - 223
EP  - 232
PB  - DIV Dt. Industrieverl.
CY  - München
ER  - 
TY  - CHAP
A1  - Engels, Elmar
T1  - A field bus library for MATLAB based on open core engineering
T2  - Proceedings to the 14th International Workshop on Research and Education in Mechatronics, REM 2013, Wien, 05.06.-06.06.2013.
Y1  - 2013
SN  - 978-3-90275-907-8
ER  - 
TY  - CHAP
A1  - Engels, Elmar
A1  - Gabler, T.
T1  - Universelle Programmierschnittstelle für Motion-Logic Systeme
T2  - Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz
Y1  - 2012
SN  - 978-3-8356-3305-6
N1  - AALE 2012
SP  - 37
EP  - 46
PB  - Oldenbourg Industrieverlag
CY  - München
ER  - 
TY  - CHAP
A1  - Engels, Elmar
A1  - Schnabel, Holger
T1  - Rapid-control-prototyping of industrial drives for the sercos automation bus
T2  - 13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan & 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)
N2  - This article describes the functionality of a MATLAB® library that can be used to develop motion-logic applications in MATLAB programming language for industrial drive and control systems using the well known sercos automation bus. Therewith MATLAB's functionality is extended to designing automation applications from single axis machines up to multi-kinematic robots.
KW  - MATLAB , MLPI , Motion control , Open Core , industrial drives , rapid control prototypin , sercos automation bus
Y1  - 2012
UR  - http://dx.doi.org/10.1109/MECATRONICS.2012.6451005
SN  - 978-1-4673-4771-6
SP  - 177
EP  - 181
ER  - 
TY  - CHAP
A1  - Engemann, Heiko
A1  - Badri, Sriram
A1  - Wenning, Marius
A1  - Kallweit, Stephan
T1  - Implementation of an Autonomous Tool Trolley in a Production Line
T2  - Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980
Y1  - 2019
SN  - 978-3-030-19648-6
U6  - https://doi.org/10.1007/978-3-030-19648-6_14
SP  - 117
EP  - 125
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Engemann, Heiko
A1  - Wiesen, Patrick
A1  - Kallweit, Stephan
A1  - Deshpande, Harshavardhan
A1  - Schleupen, Josef
T1  - Autonomous mobile manipulation using ROS
T2  - Advances in Service and Industrial Robotics
Y1  - 2018
SN  - 978-3-319-61276-8
U6  - https://doi.org/10.1007/978-3-319-61276-8_43
N1  - International Conference on Robotics in Alpe-Adria Danube Region RAAD 2017;
Mechanisms and Machince Science book series, Vol 49.
SP  - 389
EP  - 401
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Englhard, Markus
A1  - Weber, Tobias
A1  - Arent, Jan-Christoph
T1  - Efficiency enhancement for CFRP-Prepregautoclave manufacturing by means of simulation-assisted loading optimization
T2  - Proceedings of SAMPE Europe Conference 2021
N2  - A new method for improved autoclave loading within the restrictive framework of helicopter manufacturing is proposed. It is derived from experimental and numerical studies of the curing process and aims at optimizing tooling positions in the autoclave for fast and homogeneous heat-up. The mold positioning is based on two sets of information. The thermal properties of the molds, which can be determined via semi-empirical thermal simulation. The second information is a previously determined distribution of heat transfer coefficients inside the autoclave. Finally, an experimental proof of concept is performed to show a cycle time reduction of up to 31% using the proposed methodology.
Y1  - 2021
N1  - SAMPE Europe Conference 2021, Baden/Zürich, Schweiz, 29. bis 30. September 2021
ER  - 
TY  - CHAP
A1  - Enning, Manfred
A1  - Fratscher, René
T1  - Funk-Kommunikation für Güterwagen: Prinzipien und Anwendungsbeispiel
T2  - IRSA International Railway Symposium Aachen
Y1  - 2017
N1  - IRSA International Railway Symposium <2017, Aachen, Germany>
SP  - 1
EP  - 16
ER  - 
TY  - CHAP
A1  - Epple, U.
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Schnell, Michael
T1  - Receiver optimization for L-DACS1
T2  - IEEE/AIAA 28th Digital Avionics Systems Conference : 23-29 Oct. 2009 : Orlando, Fla.
Y1  - 2009
SN  - 978-1-4244-4078-8
SP  - 4B1-1
EP  - 4B1-12
ER  - 
TY  - CHAP
A1  - Ermelenko, Y.
A1  - Yoshinobu, T.
A1  - Mourzina, Y.
A1  - Schöning, Michael Josef
A1  - Vlasov, Y.
A1  - Iwasaki, H.
T1  - A multisensor based on laser scanned silicon transducer (LSST): development and properties
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 72
EP  - 73
ER  - 
TY  - CHAP
A1  - Eschler, Eric
A1  - Wozniak, Felix
A1  - Richter, Christoph
A1  - Drechsler, Klaus
T1  - Materialanalyse an lokal verstärkten Triaxialgeflechten
T2  - Leichtbau in Forschung und industrieller Anwendung von der Nano- bis zur Makroebene, LLC, Landshuter Leichtbau-Colloquium, 9
Y1  - 2019
SN  - 978-3-9818439-2-7
SP  - 120
EP  - 131
PB  - Leichtbau Cluster
CY  - Landshut
ER  - 
TY  - CHAP
A1  - Essingholt, Felix
A1  - Meyer, Frederic
A1  - Kuhn, Peter
A1  - Schmidt, Philip
A1  - Benkner, Thorsten
A1  - Grabmaier, Anton
T1  - Non-invasive heart beat measurement using microwave resonators
T2  - Proceedings, Vol. 2, Eurosensors 2018 Conference, Graz, Austria, 9–12 September 2018
Y1  - 2018
U6  - https://doi.org/10.3390/proceedings2131002
SN  - 2504-3900
SP  - 1002
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Evans, Benjamin
A1  - Braun, Sebastian
A1  - Ulmer, Jessica
A1  - Wollert, Jörg
T1  - AAS implementations - current problems and solutions
T2  - 20th International Conference on Mechatronics - Mechatronika (ME)
N2  - The fourth industrial revolution presents a multitude of challenges for industries, one of which being the increased flexibility required of manufacturing lines as a result of increased consumer demand for individualised products. One solution to tackle this challenge is the digital twin, more specifically the standardised model of a digital twin also known as the asset administration shell. The standardisation of an industry wide communications tool is a critical step in enabling inter-company operations. This paper discusses the current state of asset administration shells, the frameworks used to host them and their problems that need to be addressed. To tackle these issues, we propose an event-based server capable of drastically reducing response times between assets and asset administration shells and a multi-agent system used for the orchestration and deployment of the shells in the field.
KW  - Industry 4.0
KW  - Multi-agent Systems
KW  - Digital Twin
KW  - Asset Administration Shell
Y1  - 2022
SN  - 978-1-6654-1040-3
U6  - https://doi.org/10.1109/ME54704.2022.9982933
N1  - 20th International Conference on Mechatronics - Mechatronika (ME), 07-09 December 2022, Pilsen, Czech Republic
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Faber, Christian
T1  - Solare Großbäckerei in Burkina Faso als Beispiel eines solaren Prozesswärmesystems
T2  - 14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management
Y1  - 2004
SN  - 3-934681-33-6
SP  - 500
EP  - 505
PB  - OTTI-Energie-Kolleg
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Faber, Christian
T1  - Solare Meerwasser-Entsalzungsanlage mit mehrstufiger Wärmerückgewinnung
T2  - 14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management
Y1  - 2004
SN  - 3-934681-33-6
SP  - 154
EP  - 161
PB  - OTTI-Energie-Kolleg
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Faber, Christian
T1  - Einfache Systeme zur solaren Deckung des Wärmebedarfs zur Raumheizung, Brauchwassererwärmung und Essenszubereitung in Hochgebirgsregionen
T2  - 14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management
Y1  - 2004
SN  - 3-934681-33-6
SP  - 264
EP  - 271
PB  - OTTI-Energie-Kolleg
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Jewelry fabrication via selective laser melting of glass
T2  - ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications
N2  - Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.
Y1  - 2014
SN  - 978-0-7918-4583-7
U6  - https://doi.org/10.1115/ESDA2014-20380
SP  - V001T06A005
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Großmann, Agnes
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
T1  - Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant
T2  - International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Khosravi, Maziar
T1  - Experimental investigation of selective laser melting of lunar regolith for in-situ applications
T2  - ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15–21, 2013. Vol. 2A: Advanced manufacturing
Y1  - 2013
SN  - 978-0-7918-5618-5
SP  - V02AT02A008
PB  - ASME
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Renftle, Georg
T1  - Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces
T2  - International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA
N2  - The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Renftle, Georg
T1  - Additive manufacturing of drainage segments for cooling system of crucible melting furnaces
T2  - Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015
Y1  - 2015
U6  - https://doi.org/10.1002/9781119211662.ch14
SN  - 0196-6219
SP  - 123
EP  - 131
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Feldhusen, Jörg
A1  - Brezing, Alexander Nikolaus
A1  - Pütz, Claus
A1  - Wählisch, Georg
T1  - Multi-system CAD-teaching in large classes
T2  - When design education and design research meet : proceedings of the 12th International Conference on Engineering and Product Design Education, Norwegian University of Science and Technology (NTNU) Trondheim, Norway, 2nd - 3rd September 2010 ; [E&PDE]
Y1  - 2010
SN  - 978-1-904670-19-3
SP  - 204
EP  - 209
PB  - Design Society
CY  - Glasgow
ER  - 
TY  - CHAP
A1  - Feldmann, Markus
A1  - Pyschny, D.
A1  - Döring, Bernd
A1  - Kuhnhenne, Markus
T1  - Life cycle assessment of steel constructions
T2  - Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012
Y1  - 2012
SN  - 978-0-203-10336-4
SP  - 321
PB  - Taylor and Francis
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Fellin, Wolfgang
A1  - King, Julian
A1  - Kirsch, Ansgar
A1  - Oberguggenberger, Michael
T1  - Uncertainty modelling and sensitivity analysis of tunnel face stability
T2  - Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...
Y1  - 2009
SN  - 978-0-415-47557-0
SP  - 112
EP  - 114
PB  - CRC Pr.
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - CHAP
A1  - Fend, Thomas
A1  - Hoffschmidt, Bernhard
A1  - Reutter, Oliver
A1  - Sauerhering, Jörg
A1  - Pitz-Paal, Robert
T1  - Gas flow in hot porous materials: the solar air receiver and spin-off applications
T2  - Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland
Y1  - 2006
SN  - 0-7918-4760-8
SP  - 507
EP  - 514
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - 3D-Mapping von Straßentunneln
T2  - 16. Geokinematischer Tag, 07. und 08. Mai 2015 : Tagungsband / Technische Universität Bergakademie Freiberg
Y1  - 2015
N1  - Schriftenreihe des Instituts für Markscheidewesen und Geodsäsie an der Technischen Universität Bergakademie Freiberg
SP  - 31
EP  - 40
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Bharatheesha, Mukunda
A1  - Schiffer, Stefan
A1  - Corbato, Carlos Hernandez
T1  - TRROS 2018 :  Teaching Robotics with ROS Workshop at ERF 2018;  Proceedings of the Workshop on Teaching Robotics with ROS (held at ERF 2018), co-located with European Robotics Forum 2018 (ERF 2018), Tampere, Finland, March 15th, 2018
T2  - CEUR Workshop Proceedings
Y1  - 2019
SN  - 1613-0073
IS  - Vol-2329
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Lautermann, Mark
T1  - Towards an autonomous pilot system for a tunnel boring machine
T2  - 5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa
Y1  - 2012
SN  - 978-1-4673-5183-6
N1  - Robotics and Mechatronics Conference of South Africa <5, 2012, Johannesburg> ; ROBOMECH <5, 2012, Johannesburg>
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
A1  - Schiffer, Stefan
T1  - AllemaniACs@ home 2006 team description
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemueller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling Logistics Robots with the Action-based Language YAGI
T2  - Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemüller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling logistics robots with the action-based language YAGI
T2  - Intelligent Robotics and Applications: 9th International Conference, ICIRA 2016, Tokyo, Japan, August 22-24, 2016, Proceedings, Part I
Y1  - 2016
SN  - 978-3-319-43505-3 (Print)
SN  - 978-3-319-43506-0 (Online)
U6  - https://doi.org/10.1007/978-3-319-43506-0_46
N1  - Series: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
VL  - 9834
SP  - 525
EP  - 537
PB  - Springer
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Meeßen, Marcus
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
ED  - Lepuschitz, Wilfried
T1  - Compiling ROS schooling curricula via contentual taxonomies
T2  - Robotics in Education
N2  - The Robot Operating System (ROS) is the current de-facto standard in robot middlewares. The steadily increasing size of the user base results in a greater demand for training as well. User groups range from students in academia to industry professionals with a broad spectrum of developers in between. To deliver high quality training and education to any of these audiences, educators need to tailor individual curricula for any such training. In this paper, we present an approach to ease compiling curricula for ROS trainings based on a taxonomy of the teaching contents. The instructor can select a set of dedicated learning units and the system will automatically compile the teaching material based on the dependencies of the units selected and a set of parameters for a particular training. We walk through an example training to illustrate our work.
Y1  - 2021
SN  - 978-3-030-67411-3
U6  - https://doi.org/10.1007/978-3-030-67411-3_5
N1  - RiE: International Conference on Robotics in Education (RiE);
Advances in Intelligent Systems and Computing book series (AISC, volume 1316)
SP  - 49
EP  - 60
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Niemüller, Tim
A1  - Schiffer, Stefan
A1  - Lakemeyer, Gerhard
ED  - Boots, Byron
T1  - Lessons learnt from developing the embodied AI platform CAESAR for domestic service robotics
T2  - Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)
Y1  - 2013
SN  - 9781577356011
SP  - 21
EP  - 26
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Potgieter, Anet
A1  - Steinbauer, Gerald
T1  - Self-aware robots - What do we need from learning, deliberation, and reactive control?
T2  - HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009
Y1  - 2009
SP  - 1
EP  - 5
PB  - AAAI Pr.
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
A1  - Kallweit, Stephan
T1  - The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe
T2  - ROBOT 2017: Third Iberian Robotics Conference
Y1  - 2018
SN  - 978-3-319-70836-2
U6  - https://doi.org/10.1007/978-3-319-70836-2_31
N1  - Advances in Intelligent Systems and Computing, vol 694;
(AISC, volume 694)
SP  - 370
EP  - 381
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
A1  - Neumann, Tobias
A1  - Krückel, Kai
A1  - Schiffer, Stefan
T1  - A system for continuous underground site mapping and exploration
Y1  - 2019
U6  - https://doi.org/10.5772/intechopen.85859
ER  - 
TY  - CHAP
A1  - Feuerriegel, Uwe
A1  - Wittenhorst, Simon
A1  - Hoffmann, Ulrich
A1  - Pook, Michael
T1  - Simulation von Wärmeübertragungsprozessen
T2  - Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz
Y1  - 2012
SN  - 978-3-8356-3305-6
N1  - AALE 2012
SP  - 127
EP  - 136
PB  - Oldenbourg Industrieverlag
CY  - München
ER  - 
TY  - CHAP
A1  - Fiedler, Gerda
A1  - Gottschlich-Müller, Birgit
A1  - Melcher, Karin
ED  - Liu-Henke, Xiaobo
ED  - Durak, Umut
T1  - Online-Prüfungen mit STACK Aufgaben
T2  - Tagungsband ASIM Workshop STS/GMMS/EDU 2021
N2  - Wir stellen hier exemplarisch STACK Aufgaben vor, die frei von der Problematik sind, welche sich durch diverse Kommunikationswege und (webbasierte) Computer Algebra Systeme (CAS) ergibt. Daher sind sie insbesondere für eine Open-Book Online Prüfung geeignet, da eine faire Prüfungssituation gewährleistet werden kann.
Y1  - 2021
SN  - 978-3-901608-69-8
U6  - https://doi.org/10.11128/arep.45
N1  - Virtueller Workshop, ASIM STS/GMMS & EDU 2021, 11.-12. März 2021
SP  - 173
EP  - 178
PB  - ARGESIM Verlag
CY  - Wien
ER  - 
TY  - CHAP
A1  - Finger, Felix
T1  - Comparative Performance and Benefit Assessment of VTOL and CTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress (DLRK) 2016, 13.-15.9.2016
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Comparative assessment of parallel-hybrid-electric propulsion systems for four different aircraft
T2  - AIAA Scitech 2020 Forum
N2  - As battery technologies advance, electric propulsion concepts are on the edge of disrupting aviation markets. However, until electric energy storage systems are ready to allow fully electric aircraft, the combination of combustion engine and electric motor as a hybrid-electric propulsion system seems to be a promising intermediate solution. Consequently, the design space for future aircraft is expanded considerably, as serial-hybrid-, parallel-hybrid-, fully-electric, and conventional propulsion systems must all be considered. While the best propulsion system depends on a multitude of requirements and considerations, trends can be observed for certain types of aircraft and certain types of missions. This paper provides insight into some factors that drive a new design towards either conventional or hybrid propulsion systems. General aviation aircraft, VTOL air taxis, transport aircraft, and UAVs are chosen as case studies. Typical missions for each class are considered, and the aircraft are analyzed regarding their take-off mass and primary energy consumption. For these case studies, a high-level approach is chosen, using an initial sizing methodology. Results indicate that hybrid-electric propulsion systems should be considered if the propulsion system is sized by short-duration power constraints (e.g. take-off, climb). However, if the propulsion system is sized by a continuous power requirement (e.g. cruise), hybrid-electric systems offer hardly any benefit.
Y1  - 2020
U6  - https://doi.org/10.2514/6.2020-1502
N1  - AIAA Scitech 2020 Forum, Driving aerospace solutions for global challenges, Orlando, 06. - 10. January 2020
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Engine Failure Constraints on the Initial Sizing of Hybrid-Electric GA Aircraft
T2  - AIAA Scitech 2019 Forum
Y1  - 2019
U6  - https://doi.org/10.2514/6.2019-1812
N1  - AIAA Scitech Forum, 2019; San Diego; United States; 7 January 2019 through 11 January 2019
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - The Impact of Electric Propulsion on the Performance of VTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress 2017, DLRK , München
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - A Review of Configuration Design for Distributed Propulsion Transitioning VTOL Aircraft
T2  - Asia-Pacific International Symposium on Aerospace Technology 2017, APISAT 2017, Seoul, Korea
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - An Initial Sizing Methodology for Hybrid-Electric Light Aircraft
T2  - AIAA AVIATION Forum 2018 Aviation Technology, Integration, and Operations Conference, Atlanta, Georgia, June 25 - 29, 2018
Y1  - 2018
U6  - https://doi.org/10.2514/6.2018-4229
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Case studies in initial sizing for hybrid-electric general aviation aircraft
T2  - 2018 AIAA/IEEE Electric Aircraft Technologies Symposium, Cincinnati, Ohio
Y1  - 2018
U6  - https://doi.org/10.2514/6.2018-5005
ER  -