TY  - CHAP
A1  - Ziolko, C.
A1  - Schmitz, M.
A1  - Sattler, Johannes Christoph
A1  - Khedim, Ahmed
A1  - Hoffschmidt, Bernhard
T1  - AlSol - the open volumetric receiver technology moves to Africa
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 93
EP  - 94
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Walter, Michael
A1  - Gligorevic, Snjezana
A1  - Detert, Thorben
A1  - Schnell, Michael
T1  - UHF/VHF air-to-air propagation measurements
T2  - Proceedings of the Fourth European Conference on Antennas and Propagation (EuCAP) : 12 - 16 April 2010, Barcelona, Spain
Y1  - 2010
SN  - 978-1-4244-6431-9 ; 978-84-7653-472-4
SP  - 1
EP  - 5
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
ED  - Cecotti, A.
T1  - Determining Suitable Spacings and Distances for Self-tapping Screws by Experimental and Numerical Studies
T2  - Proceedings of the 11th World Conference on Timber Engineering, WCTE 2010 : World Conference on Timber Engineering; [June 20 - 24, 2010, Riva del Garda, Trento, Italy] . Vol. III, Riva del Garda, Italy 2010
Y1  - 2010
N1  - Extended abstract. Full paper: DVD, Session 55, ID 108, 9 Seiten
SP  - 669
EP  - 670
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - A new method to determine suitable spacings and distances for self-tapping screws
T2  - Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures
N2  - The determination of spacing, edge and end distance requirements for self-tapping screws requires numerous and comprehensive insertion tests. Yet the results of such tests cannot be transferred to other types of screws or even to screws of different diameter because of differences in shape or geometry. To reduce the effort of insertion tests a new method was developed which allows the estimation of required spacings, distances and timber thickness.
Y1  - 2010
SN  - 1864-1784
N1  - Paper 43-21-2
VL  - 43
PB  - Lehrstuhl für Ingenieurholzbau und Baukonstruktionen
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Shakedown analysis of two dimensional structures by an edge-based smoothed finite element method
Y1  - 2010
N1  - 4th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), ECCOMAS ECCM 2010, Paris, France, May 17 – 21, 2010
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Leidinger, R.
A1  - Wollert, Jörg
T1  - Simplified rapid-prototyping with automation technology
T2  - Automobiles and sustainable mobility : FISITA 2010 World Automotive Congress, 30 May - 4 June, Budapest, Hungary ; proceedings
Y1  - 2010
SN  - 978-963-9058-29-3
SP  - F2010C093
ER  - 
TY  - CHAP
A1  - Schwarzbözl, Peter
A1  - Pomp, Stefan
A1  - Koll, Gerrit
A1  - Hennecke, Klaus
A1  - Hartz, Thomas
A1  - Schmitz, Mark
A1  - Hoffschmidt, Bernhard
T1  - The solar tower Jülich - first operational experiences and test results
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 8
EP  - 9
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Chudoba, Rostislav
ED  - Fisher, Gregor
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - 8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings
Y1  - 2010
SN  - 9788778773012
SP  - 383
EP  - 388
PB  - Technical University of Denmark, Dept. of Civil Engineering
CY  - Lyngby
ER  - 
TY  - CHAP
A1  - Schnell, Michael
A1  - Franzen, Nico
A1  - Gligorevic, Snjezana
T1  - L-DACS1 laboratory demonstrator development and compatibility measurement set-up
T2  - IEEE/AIAA 29th Digital Avionics Systems Conference (DASC) : 3 - 7 Oct. 2010, Salt Lake City, Utah
Y1  - 2010
SN  - 9781424466160 ; 9781424466184
SP  - 3E3-1
EP  - 3E3-11
ER  - 
TY  - CHAP
A1  - Schmitt, Robert
A1  - Scholl, Ingrid
A1  - Cai, Yu
A1  - Xia, Ji
A1  - Dziwoki, Paul
A1  - Harding, Martin
A1  - Pavim, Alberto
T1  - Machine vision system for inline inspection in carbide insert production
T2  - Proceedings of the 36th International MATADOR Conference
N2  - In steps of the production chain of carbide inserts, such as unloading or packaging, the conformity test of the insert type is done manually, which causes a statistic increase of errors due to monotony and fatigue of the worker and the wide variety of the insert types. A machine vision system is introduced that captures digital frames of the inserts in the production line, analyses inspects automatically and measures four quality features: coating colour, edge radius, plate shape and chip-former geometry. This new method has been tested on several inserts of different types and has shown that the prevalent insert types can be inspected and robustly classified in real production environment and therefore improves the manufacturing automation.
Y1  - 2010
SN  - 978-1-84996-431-9
U6  - https://doi.org/10.1007/978-1-84996-432-6_77
N1  - 36th MATADOR Conference, University of Manchester, July 2010
SP  - 339
EP  - 342
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Rens, Gavin
A1  - Varzinczak, Ivan
A1  - Meyer, Thomas
A1  - Ferrein, Alexander
T1  - A Logic for Reasoning about Actions and Explicit Observations
T2  - AI 2010: Advances in Artificial Intelligence
N2  - We propose a formalism for reasoning about actions based on multi-modal logic which allows for expressing observations as first-class objects. We introduce a new modal operator, namely [o |α], which allows us to capture the notion of perceiving an observation given that an action has taken place. Formulae of the type [o |α]ϕ mean ’after perceiving observation o, given α was performed, necessarily ϕ’. In this paper, we focus on the challenges concerning sensing with explicit observations, and acting with nondeterministic effects. We present the syntax and semantics, and a correct and decidable tableau calculus for the logic
Y1  - 2010
U6  - https://doi.org/10.1007/978-3-642-17432-2_40
N1  - 23rd Australasian Joint Conference, Adelaide, Australia, December 7-10, 2010
SP  - 395
EP  - 404
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Keil, Allessandra
ED  - Brameshuber, Wolfgang
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ;  75)
Y1  - 2010
SN  - 978-2-35158-106-3
SP  - 153
EP  - 162
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Seismic design of masonry walls subject to out-of-plane bending
T2  - Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...
Y1  - 2010
SN  - 978-1-905088-36-2
U6  - https://doi.org/10.4203/ccp.93.348
SP  - Paper 348
PB  - Civil-Comp Press
CY  - Kippen
ER  - 
TY  - CHAP
A1  - Recker, Elmar
A1  - Bosschaerts, Walter
A1  - Wagemakers, Rolf
A1  - Hendrick, Patrick
A1  - Funke, Harald
A1  - Börner, Sebastian
T1  - Experimental study of a round jet in cross-flow at low momentum ratio
N2  - With the final objective of optimizing the "Micromix" hydrogen combustion principle, a round jet in a laminar cross-flow prior to its combustion is investigated experimentally using Stereoscopic Particle Image Velocimetry. Measurements are performed at a jet to cross-stream momentum ratio of 1 and a Reynolds number, based on the jet diameter and jet velocity, of 1600. The suitability to combine side, top and end views is analyzed statistically. The statistical theory of testing hypotheses, pertaining to the joint distribution of the averaged velocity along intersecting observation planes, is employed. Overall, the averaged velocity fields of the varying observation planes feature homogeneity at a 0.05 significance level. Minor discrepancies are related to the given experimental conditions. By use of image maps, averaged and instantaneous velocity fields, an attempt is made to elucidate the flow physics and a kinematically consistent vortex model is proposed. In the time-averaged flow field, the principal vortical systems were identified and the associated mixing visualized. The jet trajectory and physical dimensions scale with the momentum ratio times the jet diameter. The jet/cross-flow mixture converging upon the span-wise centre-line, the lifting action of the Counter Rotating Vortex Pair and the reversed flow region contribute to the high entrainment and mixedness. It is shown that the jet width is larger on the downstream side as compared to the upstream side of the centre-streamline. The deepest penetration of the particles on the outer boundary occurs in the centre-plane. Meanwhile, with increasing off-centre position, the boundaries all lay further from the centre-line position than does the boundary in the centre-plane, corresponding to a kidney-like shape of the flow cross-section. The generation of the Counter Rotating Vortex Pair and the instability mechanism is documented by instantaneous image maps and vector fields. The necessary circulation for the Counter Rotating Vortex Pair originates from a combined effect of steady in-hole, hanging and wake vortices. The strong cross-flow and jet interaction induces a three-dimensional waving, the stream-wise Counter Rotating Vortex Pair pair, leading to the formation of Ring Like Vortices. A secondary Counter Rotating Vortex Pair forms on top of the primary Counter Rotating Vortex Pair, resulting in mixing by "puffs". Overall, Stereoscopic Particle Image Velocimetry proofed capable of elucidating the Jet in Cross-Flow complex flow field. The gained insight in the mixing process will definitely contribute to the "Micromix" hydrogen combustion optimization.
Y1  - 2010
N1  - 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics Lisbon, Portugal, 05-08 July, 2010
ER  - 
TY  - CHAP
A1  - Poth, Sebastian
A1  - Monzon, Magaly
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Lignocellulosic biorefinery : process integration of hydrolysis and fermentation
T2  - Proceedings / 11th European Workshop on Lignocellulosics and Pulp : August 16 - 19, 2010, Hamburg, Germany
Y1  - 2010
SP  - 65
EP  - 68
PB  - vTi
CY  - Hamburg
ER  - 
TY  - CHAP
A1  - Pomp, Stefan
A1  - Schwarzbözl, Peter
A1  - Koll, Gerrit
A1  - Hennecke, Klaus
A1  - Schmitz, Mark
A1  - Hoffschmidt, Bernhard
T1  - Advanced concept for a solar thermal power plant with open volumetric air receiver
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 97
EP  - 98
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Vu, Khoi Duc
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - A primal-dual algorithm for shakedown analysis of elastic-plastic bounded linearly kinematic hardening bodies
Y1  - 2010
N1  - 4th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), ECCOMAS ECCM 2010, Paris, France, May 17 – 21, 2010
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An approach to adaptive control in the behavioural framework
T2  - UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)
Y1  - 2010
SN  - 978-1-62748-119-9
SP  - 833
EP  - 838
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Penne, Jochen
A1  - Profittlich, Martin
A1  - Ringbeck, Thorsten
A1  - Buxbaum, Bernd
ED  - D, Nicola D'Apuzzo
T1  - Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras
T2  - Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010
Y1  - 2010
SN  - 978-3-033-02714-5
SP  - 361
EP  - 369
PB  - Hometrica Consulting
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - A Lua-based behavior engine for controlling the humanoid robot Nao
T2  - RoboCup 2009: Robot Soccer World Cup XIII
N2  - The high-level decision making process of an autonomous robot can be seen as an hierarchically organised entity, where strategical decisions are made on the topmost layer, while the bottom layer serves as driver for the hardware. In between is a layer with monitoring and reporting functionality. In this paper we propose a behaviour engine for this middle layer which, based on formalism of hybrid state machines (HSMs), bridges the gap between high-level strategic decision making and low-level actuator control. The behaviour engine has to execute and monitor behaviours and reports status information back to the higher level. To be able to call the behaviours or skills hierarchically, we extend the model of HSMs with dependencies and sub-skills. These Skill-HSMs are implemented in the lightweight but expressive Lua scripting language which is well-suited to implement the behaviour engine on our target platform, the humanoid robot Nao.
Y1  - 2010
U6  - https://doi.org/10.1007/978-3-642-11876-0_21
N1  - 13th RoboCup International Symposium, Graz, Austria, June/July, 2009
SP  - 240
EP  - 251
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Ferrein, Alexander
A1  - Beck, Daniel
A1  - Lakemeyer, Gerhard
T1  - Design principles of the component-based robot software framework Fawkes
T2  - Simulation, Modeling, and Programming for Autonomous Robots
N2  - The idea of component-based software engineering was proposed more that 40 years ago, yet only few robotics software frameworks follow these ideas. The main problem with robotics software usually is that it runs on a particular platform and transferring source code to another platform is crucial. In this paper, we present our software framework Fawkes which follows the component-based software design paradigm by featuring a clear component concept with well-defined communication interfaces. We deployed Fawkes on several different robot platforms ranging from service robots to biped soccer robots. Following the component concept with clearly defined communication interfaces shows great benefit when porting robot software from one robot to the other. Fawkes comes with a number of useful plugins for tasks like timing, logging, data visualization, software configuration, and even high-level decision making. These make it particularly easy to create and to debug productive code, shortening the typical development cycle for robot software.
Y1  - 2010
U6  - https://doi.org/10.1007/978-3-642-17319-6_29
N1  - Second International Conference, SIMPAR 2010, Darmstadt, Germany, November 15-18, 2010
SP  - 300
EP  - 311
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Nguyen, N.-H.
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
T1  - A hyperelastic model of biological tissue materials in tubular organs
Y1  - 2010
N1  - 4th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), ECCOMAS ECCM 2010, Paris, France, May 17 – 21, 2010
ER  - 
TY  - CHAP
A1  - Matcha, Heike
A1  - Ljubas, Ante
T1  - Parametric Origami: Adaptable temporary buildings
T2  - Future cities: 28th eCAADe Conference Proceedings. eCAADe: Conferences. Zurich, Switzerland
Y1  - 2010
SN  - 978-0-9541183-7-2
SP  - 243
EP  - 251
ER  - 
TY  - CHAP
A1  - Magnor, D.
A1  - Soltau, N.
A1  - Bragard, Michael
A1  - Schmiegel, A.
A1  - De Doncker, R. W.
A1  - Sauer, D. U.
ED  - de Santi, Giovanni Frederigo
T1  - Analysis of the model dynamics for the battery and battery converter in a grid-connected 5 kW photovoltaic system
T2  - Proceedings / 25th European Photovoltaic Solar Energy Conference and Exhibition ; 5th World Conference on Photovoltaic Energy Conversion ; Feria Valencia, Convention & Exhibition Centre, Valencia, Spain, conference 6 - 10 September 2010, exhibition 6 - 9 September 2010 ; Joint World Conference of: 25th European Photovoltic Solar Energy Conference and Exhibition, 36th US IEEE Photovoltaic Specialists Conference, 20th Asia/Pacific PV Science and Engineering Conference
Y1  - 2010
SN  - 3-936338-26-4  (DVD-ROM)
N1  - EU PVSEC WCPEC
PB  - WIP Renewable Energies
CY  - [München]
ER  - 
TY  - CHAP
A1  - Lettini, Antonio
A1  - Havermann, Marc
A1  - Guidetti, Marco
A1  - Fornaciari, Andrea
T1  - Improved functionalities and energy saving potential on mobile machines combining electronics with flow sharing valve and variable displacement pump
T2  - 7th International Fluid Power Conference - Vol. 3 - Aachen Efficiency through Fluid Power Workshop Proceedings
Y1  - 2010
SN  - 978-3-940565-92-1
N1  - IFK, 7, Internationales Fluidtechnisches Kolloquium, 7., Aachen, DE, 2010-03-22 - 2010-03-24
SP  - 103
EP  - 114
PB  - Apprimus Verlag
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Kurulgan Demirci, Eylem
A1  - Linder, Peter
A1  - Demirci, Taylan
A1  - Gierkowski, Jessica R.
A1  - Digel, Ilya
A1  - Gossmann, Matthias
A1  - Temiz Artmann, Aysegül
T1  - rhAPC reduces the endothelial cell permeability via a decrease of cellular mechanical contractile tensions : [abstract]
N2  - In this study, the CellDrum technology quanitfying cellular mechanical tension on a pico-scale was used to investigate the effect of LPS (lipopolysaccharide) on HAoEC (Human Aortic Endothelial Cell) tension.
KW  - Endothelzelle
KW  - Sepsis
KW  - kontraktile Spannung
KW  - rhAPC
KW  - contractile tension
KW  - rhAPC
KW  - celldrum technology
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
A1  - Marcher, Thomas
T1  - Numerical prediction of time-dependent rock swelling based on an example of a major tunnel project in Ontario/Canada
T2  - Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...
Y1  - 2010
SN  - 978-0-415-59239-0
SP  - 297
EP  - 302
PB  - Taylor and Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
T1  - Numerical investigation of the face stability of shallow tunnels in sand
T2  - Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...
Y1  - 2010
SN  - 978-0-415-59239-0
SP  - 779
EP  - 784
PB  - Taylor and Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Kerpen, N. B.
A1  - Bung, Daniel Bernhard
A1  - Schlurmann, Torsten
ED  - Janssen, Robert
T1  - Physical model investigations of ships passing through a lock
T2  - Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010
Y1  - 2010
SN  - 9781742720159
SP  - 93
EP  - 100
PB  - School of Civil Engineeering, The University of Queensland
CY  - Brisbane
ER  - 
TY  - CHAP
A1  - Kerpen, N. B.
A1  - Bung, Daniel Bernhard
A1  - Schlurmann, Torsten
T1  - Physical model investigations of pressure distributions next to ships passing through a lock
T2  - 5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010
Y1  - 2010
SN  - 978-7-5618-3671-2
SP  - 514
EP  - 519
PB  - Univ. Press
CY  - Tianjin
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Schelthoff, Christof
A1  - Mathieu, Moritz
T1  - Probability of lightning strikes to air-terminations of structures using the electro-geometrical model theory and the statistics of lightning current parameters
N2  - Planning the air-terminations for a structure to be protected the use of the rolling-sphere method (electro-geometrical model) is the best way from the physics of lightning point-of-view. Therefore, international standards prefer this method. However, using the rolling-sphere method only results in possible point-of-strikes on a structure without giving information about the probability of strikes at the individual points compared to others.
KW  - atmospheric modeling
KW  - probability distribution
KW  - lightning protection
KW  - standards
KW  - planning
Y1  - 2010
SN  - 978-88-905519-0-1
U6  - https://doi.org/10.1109/ICLP.2010.7845757
N1  - 2010 30th International Conference on Lightning Protection (ICLP), 13-17 Sept. 2010, Cagliari, Italy
SP  - 750-1
EP  - 750-8
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Frentzel, Ralf
A1  - Behrens, Jörg
T1  - Simulation of the transient voltages in the auxiliary power network of a large power plant in case of a direct lightning strike to the high-voltage overhead transmission line
N2  - Large power plants can be endangered by lightning strikes with possible consequences regarding their safety and availability. A special scenario is a lightning strike to the HV overhead transmission line close to the power plant's connection to the power grid. If then additionally a so-called shielding failure of the overhead ground wire on top of the overhead transmission line is assumed, i.e. the lightning strikes directly into a phase conductor, this is an extreme electromagnetic disturbance. The paper deals with the numerical simulation of such a lightning strike and the consequences on the components of the power plant's auxiliary power network connected to different voltage levels.
KW  - power generation
KW  - surges
KW  - conductors
KW  - arresters
KW  - power transmission lines
KW  - lightning
Y1  - 2010
SN  - 978-88-905519-0-1
U6  - https://doi.org/10.1109/ICLP.2010.7845756
N1  - 2010 30th International Conference on Lightning Protection (ICLP), 13-17 Sept. 2010, Cagliari, Italy
SP  - 749-1
EP  - 749-7
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Kapoor, Hrshi
A1  - Braun, Carsten
A1  - Boller, Christian
ED  - Casciati, Fabio
T1  - Modelling and optimisation of maintenance intervals to realize structural health monitoring applications on aircraft
T2  - Structural health monitoring 2010 : proceedings of the Fifth European Workshop on Structural Health Monitoring held at Sorrento, Naples, Italy, June 28 - July 4, 2010 ; [EWSHM]
Y1  - 2010
SN  - 978-1-60595-024-2
SP  - 55
EP  - 63
PB  - DEStech Publ.
CY  - Lancaster, Pa.
ER  - 
TY  - CHAP
A1  - Kapoor, Hrshi
A1  - Boller, Christian
A1  - Giljohann, Sebastian
A1  - Braun, Carsten
T1  - Strategies for structural health monitoring implementation potential assessment in aircraft operational life extension considerations
T2  - 2nd International Symposium on NDT in Aerospace : November 22-24, 2010 Hamburg, Germany
Y1  - 2010
SN  - 978-3-940283-28-3
PB  - Dt. Gesellschaft für Zerstörungsfreie Prüfung
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Heinz, G.
A1  - Oertel, Mario
A1  - Bung, Daniel Bernhard
ED  - Janssen, Robert
T1  - Investigations on a cooling water system for a gas tubine facility concerning air vortexes and sediment transport
T2  - Hydraulic structures: useful water harvesting systems or relics? : Third International Junior Researcher and Engineer Workshop on Hydraulic Structures (IJREWHS'10) : Edinburgh, Scotland, U.K., 2-3 May 2010
Y1  - 2010
SN  - 9781742720159
SP  - 109
EP  - 116
PB  - School of Civil Engineering, The University of Queensland
CY  - Brisbane
ER  - 
TY  - CHAP
A1  - Havermann, Marc
A1  - Seiler, F.
A1  - Henning, P.
ED  - Dillmann, Andreas
ED  - Heller, Gerd
ED  - Klaas, Michael
ED  - Kreplin, Hans-Peter
ED  - Nitsche, Wolfgang
ED  - Schröder, Wolfgang
T1  - Shock Tunnel Experiments and CFD Simulation of Lateral Jet Interaction in Hypersonic Flows
T2  - New Results in Numerical and Experimental Fluid Mechanics VII; Contributions to the 16th STAB/DGLR Symposium Aachen, Germany 2008
Y1  - 2010
SN  - 9783642142437
U6  - https://doi.org/10.1007/978-3-642-14243-7_45
N1  - Notes on numerical fluid mechanics and multidisciplinary design 112
SP  - 365
EP  - 372
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Niendorf, Thoralf
A1  - Frauenrath, Tobias
A1  - Otten, Mario
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - 3D vocal fold geometry mapping using Magnetic Resonance Imaging
T2  - Fortschritte der Akustik : 36. Deutsche Jahrestagung für Akustik, Band 1
Y1  - 2010
SN  - 978-3-9808659-8-2
N1  - Fortschritte der Akustik : 36. Deutsche Jahrestagung für Akustik ; 15.-18. März 2010, Berlin
SP  - 271
EP  - 272
PB  - Deutsche Gesellschaft für Akustik
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Goldbach, Daniel
A1  - Ament, Christoph
ED  - Scharff, Peter
T1  - Stabilized reversing with vehicle trailer combinations
T2  - Crossing borders within the ABC : automation, biomedical engineering and computer science; proceedings; 55. IWK Internationales Wissenschaftliches Kolloquium; 13 - 17 September 2010, Ilmenau
Y1  - 2010
SN  - 978-3-938843-53-6
SP  - 352
EP  - 357
PB  - Verl. ISLE
CY  - Ilmenau
ER  - 
TY  - CHAP
A1  - Gligorevic, Snjezana
A1  - Pulini, Paola
T1  - Simplified airport surface channel model based on the WSSUS assumption
T2  - 2010 Integrated Communications, Navigation and Surveillance Conference (ICNS 2010) : Herndon, Virginia, USA, 11 - 13 May 2010
Y1  - 2010
SN  - 978-1-4244-7457-8
SN  - 2155-4943
SP  - F2-1
EP  - F2-11
ER  - 
TY  - CHAP
A1  - Gerhards, Michael
A1  - Belloum, Adam
A1  - Berretz, Frank
A1  - Sander, Volker
A1  - Skorupa, Sascha
T1  - A history-tracing XML-based provenance framework for workflows
T2  - The 5th Workshop on Workflows in Support of Large-Scale Science
N2  - The importance of validating and reproducing the outcome of computational processes is fundamental to many application domains. Assuring the provenance of workflows will likely become even more important with respect to the incorporation of human tasks to standard workflows by emerging standards such as WS-HumanTask. This paper addresses this trend by an actor-based workflow approach that actively support provenance. It proposes a framework to track and store provenance information automatically that applies for various workflow management systems. In particular, the introduced provenance framework supports the documentation of workflows in a legally binding way. The authors therefore use the concept of layered XML documents, i.e. history-tracing XML. Furthermore, the proposed provenance framework enables the executors (actors) of a particular workflow task to attest their operations and the associated results by integrating digital XML signatures.
KW  - workflow
KW  - provenance
KW  - framework
KW  - containers
KW  - humans
KW  - synchronization
KW  - libraries
KW  - history
KW  - concrete
KW  - XML
Y1  - 2010
SN  - 978-1-4244-8989-3
U6  - https://doi.org/10.1109/WORKS.2010.5671873
N1  - The 5th Workshop on Workflows in Support of Large-Scale Science, 14 Nov. 2010, New Orleans, USA
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Park, Jin
A1  - Butenweg, Christoph
T1  - Seismic safety verification of masonry structures
T2  - Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universität Dresden]. Ed. by: Wolfram Jäger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)
Y1  - 2010
SN  - 978-3-00-031381-3
SP  - 813
EP  - 822
PB  - ARGE 8IMC Dresden
CY  - Radebeul
ER  - 
TY  - CHAP
A1  - Geimer, Konstantin
A1  - Sauerborn, Markus
A1  - Hoffschmidt, Bernhard
A1  - Schmitz, Mark
A1  - Göttsche, Joachim
T1  - Test facility for absorber specimens of solar tower power plants
T2  - Advances in Science and Technology
N2  - The Solar-Institute Jülich (SIJ) has initiated the construction of the first and only German solar tower power plant and is now involved in the accompanying research. The power plant for experimental and demonstration purposes in the town of Jülich started supplying electric energy in the beginning of 2008. The central receiver plant features as central innovation an open volumetric receiver, consisting of porous ceramic elements that simultaneously absorb the concentrated sunlight and transfer the heat to ambient air passing through the pores so that an average temperature of 680°C is reached. The subsequent steam cycle generates up to 1.5 MWe. A main field of research at the SIJ is the optimization of the absorber structures. To analyze the capability of new absorber specimens a special test facility was developed and set up in the laboratory. A high-performance near-infrared radiator offers for single test samples a variable and repeatable beam with a power of up to 320 kW/m² peak. The temperatures achieved on the absorber surface can reach more than 1000°C. To suck ambient air through the open absorber - like on the tower - it is mounted on a special blower system. An overview about the test facility and some recent results will be presented.
Y1  - 2010
U6  - https://doi.org/10.4028/www.scientific.net/AST.74.266
N1  - 5th Forum on New Materials : CIMTEC 2010, Montecatini Terme, Italy 13-18 June 2010. Part C
VL  - 74
SP  - 266
EP  - 271
PB  - Trans Tech Publications
CY  - Baech
ER  - 
TY  - CHAP
A1  - Gall, Jan
A1  - Abel, Dirk
A1  - Ahlbrink, Nils
A1  - Pitz-Paal, Robert
A1  - Andersson, Joel A. E.
A1  - Diehl, M.
A1  - Teixeira Boura, Cristiano José
A1  - Schmitz, Mark
A1  - Hoffschmidt, Bernhard
T1  - Simulation and control of solar thermal power plants
T2  - International Conference on Renewable Energies and Power Quality : ICREPQ '10 : Granada 23rd - 25th March 2010
Y1  - 2010
SP  - 1
EP  - 5
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Robinson, A. E.
A1  - Hendrick, P.
A1  - Wagemakers, R.
T1  - Design and Testing of a Micromix Combustor With Recuperative Wall Cooling for a Hydrogen Fuelled µ-Scale Gas Turbine
T2  - Conference Proceedings ASME Turbo Expo 2010: Power for Land, Sea, and Air. Volume 5: Industrial and Cogeneration; Microturbines and Small Turbomachinery; Oil and Gas Applications; Wind Turbine Technology
N2  - For more than a decade up to now there is an ongoing interest in small gas turbines downsized to micro-scale. With their high energy density they offer a great potential as a substitute for today’s unwieldy accumulators, found in a variety of applications like laptops, small tools etc. But micro-scale gas turbines could not only be used for generating electricity, they could also produce thrust for powering small unmanned aerial vehicles (UAVs) or similar devices. Beneath all the great design challenges with the rotating parts of the turbomachinery at this small scale, another crucial item is in fact the combustion chamber needed for a safe and reliable operation. With the so called regular micromix burning principle for hydrogen successfully downscaled in an initial combustion chamber prototype of 10 kW energy output, this paper describes a new design attempt aimed at the integration possibilities in a μ-scale gas turbine. For manufacturing the combustion chamber completely out of stainless steel components, a recuperative wall cooling was introduced to keep the temperatures in an acceptable range. Also a new way of an integrated ignition was developed. The detailed description of the prototype’s design is followed by an in depth report about the test results. The experimental investigations comprise a set of mass flow variations, coupled with a variation of the equivalence ratio for each mass flow at different inlet temperatures and pressures. With the data obtained by an exhaust gas analysis, a full characterisation concerning combustion efficiency and stability of the prototype chamber is possible. Furthermore the data show a full compliance with the expected operating requirements of the designated μ-scale gas turbine.
Y1  - 2010
SN  - 978-0-7918-4400-7
U6  - https://doi.org/10.1115/GT2010-23453
N1  - ASME Turbo Expo 2010: Power for Land, Sea, and Air, June 14–18, 2010, Glasgow, UK
SP  - 587
EP  - 596
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Robinson, A.
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Low NOx H2 combustion for industrial gas turbines of various power ranges
Y1  - 2010
N1  - 5th International Gas Turbine Conference ETN-IGTC, ETN-2010-42, Brussels, Belgium, October 2010
ER  - 
TY  - CHAP
A1  - Fricke, Barbara
A1  - Hoffschmidt, Bernhard
T1  - Ecobalance of a solar thermal tower power plant with volumetric receiver
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 87
EP  - 88
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Frauenrath, Tobias
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Otten, Mario
A1  - Niendorf, Thoralf
T1  - 3D mapping of vocal fold geometry during articulatory maneuvers using ultrashort echo time imaging at 3.0 T
T2  - ISMRM-ESMRMB joint annual meeting 2010, Band 4
Y1  - 2010
SN  - 978-1-617-82008-3
N1  - ISMRM-ESMRMB joint annual meeting 2010 : Stockholm, Sweden, 1 - 7 May 2010
SP  - 3087
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - On the Way to High-Level Programming for Resource-Limited Embedded Systems with Golog
T2  - Simulation, Modeling, and Programming for Autonomous Robots
N2  - In order to allow an autonomous robot to perform non-trivial tasks like to explore a foreign planet the robot has to have deliberative capabilities like reasoning or planning. Logic-based approaches like the programming and planing language Golog and it successors has been successfully used for such decision-making problems. A drawback of this particular programing language is that their interpreter usually are written in Prolog and run on a Prolog back-end. Such back-ends are usually not available or feasible on resource-limited robot systems. In this paper we present our ideas and first results of a re-implementation of the interpreter based on the Lua scripting language which is available on a wide range of systems including small embedded systems.
Y1  - 2010
U6  - https://doi.org/10.1007/978-3-642-17319-6_23
N1  - Second International Conference, SIMPAR 2010, Darmstadt, Germany, November 15-18, 2010
SP  - 229
EP  - 240
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - golog.lua: Towards a non-prolog implementation of Golog for embedded systems
T2  - Dagstuhl Seminar Proceedings, Volume 10081
N2  - Among many approaches to address the high-level decision making problem for autonomous robots and agents, the robot program¬ming and plan language Golog follows a logic-based deliberative approach, and its successors were successfully deployed in a number of robotics applications over the past ten years. Usually, Golog interpreter are implemented in Prolog, which is not available for our target plat¬form, the bi-ped robot platform Nao. In this paper we sketch our first approach towards a prototype implementation of a Golog interpreter in the scripting language Lua. With the example of the elevator domain we discuss how the basic action theory is specified and how we implemented fluent regression in Lua. One possible advantage of the availability of a Non-Prolog implementation of Golog could be that Golog becomes avail¬able on a larger number of platforms, and also becomes more attractive for roboticists outside the Cognitive Robotics community.
Y1  - 2010
U6  - https://doi.org/10.4230/DagSemProc.10081.9
N1  - Dagstuhl Seminar 10081 "Cognitive Robotics", 21.02. to 26.02.2010, Schloss Dagstuhl - Leibniz Center for Informatics, Wadern, DE
SP  - 1
EP  - 15
ER  - 
TY  - CHAP
A1  - Feldhusen, Jörg
A1  - Brezing, Alexander Nikolaus
A1  - Pütz, Claus
A1  - Wählisch, Georg
T1  - Multi-system CAD-teaching in large classes
T2  - When design education and design research meet : proceedings of the 12th International Conference on Engineering and Product Design Education, Norwegian University of Science and Technology (NTNU) Trondheim, Norway, 2nd - 3rd September 2010 ; [E&PDE]
Y1  - 2010
SN  - 978-1-904670-19-3
SP  - 204
EP  - 209
PB  - Design Society
CY  - Glasgow
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Leimena, W.
A1  - Dachwald, Bernd
A1  - Linder, Peter
A1  - Porst, Dariusz
A1  - Kayser, Peter
A1  - Funke, O.
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
T1  - In-situ biological decontamination of an ice melting probe : [abstract]
N2  - The objective of our study was to investigate the efficacy of different in-situ decontamination protocols in the conditions of thermo-mechanical ice-melting.
KW  - Sonde
KW  - Dekontamination
KW  - Wasserstoffperoxid
KW  - Natriumhypochlorit
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Börner, Sebastian
A1  - Funke, Harald
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Control system modifications for a hydrogen fuelled gas-turbine
T2  - Proceedings of ISROMAC 13
Y1  - 2010
SN  - 978-1-617-38848-4
N1  - 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010 (ISROMAC-13), Honolulu, Hawaii, USA, April 4-7, 2010
SP  - 665
EP  - 670
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
A1  - Schlenkhoff, Andreas
T1  - Self-aerated skimming flow on embankment stepped spillways : the effect of additional micro-roughness on energy dissipation and oxygen transfer
T2  - Proceedings from first IAHR European congress : May 2010, Edinburgh
Y1  - 2010
SN  - 9780956595102
SP  - Artikelkennnummer HSIIId
PB  - Heriot-Watt University, School of the Built Environment
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
A1  - Oertel, M.
A1  - Schlenkhoff, A.
A1  - Schlurmann, Torsten
ED  - Obrusnik, Ivan
T1  - Flash flood awareness and prevention in Germany
T2  - Early warning for flash floods : international workshop, Praha 2011 : workshop proceedings
Y1  - 2010
SN  - 978-80-86690-91-9
SP  - 34
EP  - 40
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
T1  - A comparative study of self-aerated stepped spillway and smooth invert chute flow: the effect of step-induced macro roughness
T2  - 5th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : CG JOINT 2010
Y1  - 2010
SN  - 978-7-5618-3671-2
SP  - 451
EP  - 456
PB  - Univ. Press
CY  - Tianjin
ER  - 
TY  - CHAP
A1  - Buck, R.
A1  - Wurmhöringer, K.
A1  - Lehle, R.
A1  - Pfahl, A.
A1  - Göttsche, Joachim
A1  - Meyr, T.
T1  - Development of a 30m2 heliostat with hydraulic drive
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 74
EP  - 75
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Soltau, N.
A1  - De Doncker, R. W.
A1  - Schmiegel, A.
T1  - Design and implementation of a 5 kW photovoltaic system with li-ion battery and additional DC-DC converter
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - https://doi.org/10.1109/ECCE.2010.5618220
SP  - 2944
EP  - 2949
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Conrad, M.
A1  - De Doncker, R. W.
T1  - The integrated emitter turn-off thyristor (IETO) : an innovative thyristor based high power semiconductor device using MOS assisted turn-off
T2  - 2010 IEEE Energy Conversion Congress and Exposition (ECCE 2010) : Atlanta, Georgia, USA, 12 - 16 September 2010 / [sponsored by the IEEE Power Electronics and Industry Applications Societies]
Y1  - 2010
SN  - 978-1-4244-5286-6 (Print)
SN  - 978-1-4244-5287-3 (Online)
U6  - https://doi.org/10.1109/ECCE.2010.5618410
SP  - 4551
EP  - 4557
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bouquegneau, Christian
A1  - Kern, Alexander
A1  - Rousseau, Alain
T1  - Lightning safety guidelines
N2  - This paper introduces lightning to the layman, noting the right behaviour in front of thunderstorms as well as protective measures against lightning. It also contributes to the prevention of lightning injuries and damages. This report was prepared by the authors inside the AHG1 Group for IEC TC81 (Lightning Protection).
Y1  - 2010
N1  - Ground´2010 & 4th LPE, International Conference on Grounding and Earthing & 4th International Conference on Lightning Physics and Effects, Salvador - Brazil, November, 2010
ER  - 
TY  - CHAP
A1  - Borggräfe, Andreas
A1  - Dachwald, Bernd
T1  - Mission performance evaluation for solar sails using a refined SRP force model with variable optical coefficients
T2  - 2nd International Symposium on Solar Sailing
N2  - Solar sails provide ignificant advantages over other low-thrust propulsion systems because they produce thrust by the momentum exchange from solar radiation pressure (SRP) and thus do not consume any propellant.The force exerted on a very thin sail foil basically depends on the light incidence angle. Several analytical SRP force models that describe the SRP force acting on the sail have been established since the 1970s. All the widely used models use constant optical force coefficients of the reflecting sail material. In 2006,MENGALI et al. proposed a refined SRP force model that takes into account the dependancy of the force coefficients on the light incident angle,the sail’s distance from the sun (and thus the sail emperature) and the surface roughness of the sail material [1]. In this paper, the refined SRP force model is compared to the previous ones in order to identify the potential impact of the new model on the predicted capabilities of solar sails in performing low-cost interplanetary space missions. All force models have been implemented within InTrance, a global low-thrust trajectory optimization software utilizing evolutionary neurocontrol [2]. Two interplanetary rendezvous missions, to Mercury and the near-Earth asteroid 1996FG3, are investigated. Two solar sail performances in terms of characteristic acceleration are examined for both scenarios, 0.2 mm/s2 and 0.5 mm/s2, termed “low” and “medium” sail performance. In case of the refined SRP model, three different values of surface roughness are chosen, h = 0 nm, 10 nm and 25 nm. The results show that the refined SRP force model yields shorter transfer times than the standard model.
Y1  - 2010
N1  - 2nd International Symposium on Solar Sailing, ISSS 2010, 2010-07-20 - 2010-07-22. New York City College of Technology of the City University of New York, USA
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Bitz, Andreas
A1  - Kraff, O.
A1  - Orzada, S.
A1  - Maderwald, S.
A1  - Brote, I.
A1  - Ladd, M.
T1  - Experimental and Numerical Assessment of RF Safety of Transmit Coils at 7 Tesla
T2  - ISMRM workshop on MR safety 2010 : RF heating of the human in MRI : workshop series. The Washington County Historic Courthouse, Stillwater, Minnesota, USA, 15 - 17 October 2010
Y1  - 2010
SN  - 978-1-62276-088-6
SP  - 195
ER  - 
TY  - CHAP
A1  - Berretz, Frank
A1  - Skorupa, Sascha
A1  - Sander, Volker
A1  - Belloum, Adam
T1  - Towards an actor-driven workflow management system for grids
T2  - Proceedings of 2010 International Symposium on Collaborative Technologies and Systems
N2  - Currently, most workflow management systems in Grid environments provide push-oriented job distribution strategies, where jobs are explicitly delegated to resources. In those scenarios the dedicated resources execute submitted jobs according to the request of a workflow engine or Grid wide scheduler. This approach has various limitations, particularly if human interactions should be integrated in workflow execution. To support human interactions with the benefit of enabling inter organizational computation and community approaches, this poster paper proposes the idea of a pull-based task distribution strategy. Here, heterogeneous resources, including human interaction, should actively select tasks for execution from a central repository. This leads to special demands regarding security issues like access control. In the established push-based job execution the resources are responsible for granting access to workflows and job initiators. In general this is done by access control lists, where users are explicitly mapped to local accounts according to their policies. In the pull-based approach the resources actively apply for job executions by sending requests to a central task repository. This means that every resource has to be able to authenticate against the repository to be authorized for task execution. In other words the authorization is relocated from the resources to the repository. The poster paper introduces current work regarding to the mentioned security aspects in the pull-based approach within the scope of the project “HiX4AGWS”.
KW  - scheduling
KW  - engines
KW  - resource management
KW  - grid computing
KW  - access control
KW  - distribution strategy
KW  - authorization
KW  - security
KW  - humans
KW  - workflow management software
Y1  - 2010
SN  - 978-1-4244-6619-1
U6  - https://doi.org/10.1109/CTS.2010.5478458
N1  - 2010 International Symposium on Collaborative Technologies and Systems, 17-21 May 2010, Chicago, IL, USA
SP  - 611
EP  - 616
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Beging, Stefan
A1  - Poghossian, Arshak
A1  - Mlynek, D.
A1  - Hataihimakul, S.
A1  - Pedraza, A.
A1  - Dhawan, S.
A1  - Laube, N.
A1  - Kleinen, Lisa
A1  - Baldsiefen, Gerhard
A1  - Busch, Heinrich von
A1  - Schöning, Michael Josef
T1  - Ion-selective sensors for the determination of the risk of urinary stone formation
T2  - Micro- and Nanosystems in biochemical diagnosis : Principles and applications
Y1  - 2010
SP  - 74
EP  - 80
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Baumann, Torsten
A1  - Teixeira Boura, Cristiano José
A1  - Göttsche, Joachim
A1  - Hoffschmidt, Bernhard
A1  - O'Connell, Bryan
A1  - Schmitz, Stefan
A1  - Zunft, Stefan
T1  - Air/Sand heat exchanger design and materials for solar thermal power plant applications
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 146
EP  - 147
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Artmann, Gerhard
A1  - Stadler, Andreas M.
A1  - Embs, Jan P.
A1  - Zaccai, Giuseppe
A1  - Büldt, Georg
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
T1  - The crucial role of water in a phase transition of hemoglobin at body temperature : [abstract]
N2  - The observation of a temperature transition of hemoglobin occurring at a critical temperature close to body temperature
KW  - Hämoglobin
KW  - Erythrozyt
KW  - Körpertemperatur
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Anthrakidis, Anette
A1  - Rusack, Markus
A1  - Schwarzer, Klemens
T1  - Low effort measurement method of PTC-efficiency
T2  - SolarPACES 2010 : the CSP conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 48
EP  - 49
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
A1  - Rau, Christoph
A1  - Schmitz, M.
A1  - Schwarzbözl, P.
A1  - Pomp, Stefan
T1  - Simulation results for a hybridized operation of a gas turbine or a burner for a small solar tower power plant
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 82
EP  - 83
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Abel, Thomas
A1  - Bonin, Dominik
A1  - Albracht, Kirsten
A1  - Zeller, Sebastian
A1  - Brüggemann, Gert-Peter
A1  - Burkett, Brendan
A1  - Strüder, Heiko K.
T1  - Kinematic profile of the elite handcyclist
T2  - 28th  International Conference on Biomechanics in Sports, Marquette, Michigan, USA, July 19 – 23, 2010
Y1  - 2017
SN  - 1999-4168
SP  - 140
EP  - 141
ER  -