TY  - THES
A1  - Goßmann, Matthias
T1  - Entwicklung eines autokontraktilen Herzmuskelmodells zur funktionalen Medikamenten- und Toxinforschung
Y1  - 2015
N1  - Duisburg, Essen, Universität Duisburg-Essen, Diss., 2015
PB  - Universitätsbibliothek Duisburg-Essen
CY  - Duisburg ; Essen
ER  - 
TY  - JOUR
A1  - Hoeveler, Bastian
A1  - Janser, Frank
A1  - Bindewald, Thorsten
A1  - Gebhardt, Andreas
T1  - Entwurf, Fertigung und Untersuchung eines Windkanalmodells eines innovativen, senkrechtstartenden Kleinflugzeuges
JF  - RTejournal - Forum für Rapid Technologie
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-2-42921
SN  - 1614-0923
IS  - 12
SP  - 1
EP  - 5
PB  - Fachhochschule Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Katz, Evgeny
A1  - Schöning, Michael Josef
T1  - Enzyme logic AND-Reset and OR-Reset gates based on a field-effect electronic transducer modified with multi-enzyme membrane
JF  - Chemical Communications
N2  - Capacitive field-effect sensors modified with a multi-enzyme membrane have been applied for an electronic transduction of biochemical signals processed by enzyme-based AND-Reset and OR-Reset logic gates. The local pH change at the sensor surface induced by the enzymatic reaction was used for the activation of the Reset function for the first time.
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C5CC01362C
VL  - 51
SP  - 6564
EP  - 6567
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Heuer, R.
A1  - Wenk, T.
T1  - Erdbebeningenieurwesen und Baudynamik
T1  - Earthquake engineering and structural dynamics (editorial)
JF  - Bauingenieur
Y1  - 2015
SN  - 00056650
VL  - 90
IS  - 10
SP  - S1
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - GEN
A1  - Olbertz, Klaus
T1  - Ergänzende Vertragsauslegung bei nachträglicher Regelungslücke in Vergütungsabrede wegen Tarifsukzession
T2  - Gesellschafts- und Wirtschaftsrecht : GWR
Y1  - 2018
SN  - 1868-1816
N1  - Anm. zu BAG: Entscheidungsbesprechung zum Urteil v. 25.02.2015 - 5 AZR 481/13
SP  - 392
EP  - 392
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - Europe and South African collaboration on the Mechatronics and Robotics systems as part of the SA Robotics Center
T2  - ICRA 2015 Developing Countries Forum
N2  - Mechatronics consist of the integration of mechanical
engineering, electronic integration and computer science/
engineering. These broad fields are essential for robotic
systems, yet it makes it difficult for the researchers to specialize
and be experts in all these fields. Collaboration between
researchers allow for the integration of experience and specialization,
to allow optimized systems. Collaboration between the
European countries and South Africa is critical, as each country
has different resources available, which the other countries
might not have. Applications with the need for approval of
any restrictions, can also be obtained easier in some countries
compared to others, thus preventing the delays of research.
Some problems that have been experienced are discussed, with
the Robotics Center of South Africa as a possible solution.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Kolditz, Melanie
A1  - Albracht, Kirsten
A1  - Fasse, Alessandro
A1  - Albin, Thivaharan
A1  - Brüggemann, Gert-Peter
A1  - Abel, Dirk
T1  - Evaluation of an industrial robot as a leg press training device
T2  - XV International Symposium on Computer Simulation in Biomechanics July 9th – 11th 2015, Edinburgh, UK
Y1  - 2015
SP  - 41
EP  - 42
ER  - 
TY  - JOUR
A1  - Pöttgen, Philipp
A1  - Ederer, Thorsten
A1  - Altherr, Lena
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
T1  - Examination and optimization of a heating circuit for energy-efficient buildings
JF  - Energy Technology
N2  - The conference center darmstadtium in Darmstadt is a prominent example of energy efficient buildings. Its heating system consists of different source and consumer circuits connected by a Zortström reservoir. Our goal was to reduce the energy costs of the system as much as possible. Therefore, we analyzed its supply circuits. The first step towards optimization is a complete examination of the system: 1) Compilation of an object list for the system, 2) collection of the characteristic curves of the components, and 3) measurement of the load profiles of the heat and volume-flow demand. Instead of modifying the system manually and testing the solution by simulation, the second step was the creation of a global optimization program. The objective was to minimize the total energy costs for one year. We compare two different topologies and show opportunities for significant savings.
KW  - energy transfer
KW  - heating system
KW  - programming
KW  - system optimization
KW  - technical operations research
Y1  - 2015
SN  - 2194-4296
U6  - http://dx.doi.org/10.1002/ente.201500252
VL  - 4
IS  - 1
SP  - 136
EP  - 144
PB  - WILEY-VCH Verlag
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Noureddine, Yacine
A1  - Bitz, Andreas
A1  - Ladd, Mark E.
A1  - Thürling, Markus
A1  - Ladd, Susanne C.
A1  - Schaefers, Gregor
A1  - Kraff, Oliver
T1  - Experience with magnetic resonance imaging of human subjects with passive implants and tattoos at 7 T: a retrospective study
JF  - Magnetic Resonance Materials in Physics, Biology and Medicine
Y1  - 2015
U6  - http://dx.doi.org/10.1007/s10334-015-0499-y
SN  - 1352-8661
VL  - 28
IS  - 6
SP  - 577
EP  - 590
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - JOUR
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Striegan, Constantin
A1  - Bohn, D.
T1  - Experimental and numerical investigations of the dry-low-NOx hydrogen micromix combustion chamber of an industrial gas turbine
JF  - Propulsion and power research
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.jppr.2015.07.005
SN  - 2212-540X
VL  - Vol. 4
IS  - Iss. 3
SP  - 123
EP  - 131
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications
T2  - ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15–19, 2015
Y1  - 2015
SN  - 978-0-7918-5668-0
U6  - http://dx.doi.org/10.1115/GT2015-42043
SP  - V04AT04A008
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. 3. Aufl. Bd. 1
Y1  - 2015
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ET  - 3. Aufl.
ER  - 
TY  - JOUR
A1  - Mulhern, Colm
A1  - Bialonski, Stephan
A1  - Kantz, Holger
T1  - Extreme events due to localization of energy
JF  - Physical Review E
Y1  - 2015
U6  - http://dx.doi.org/10.1103/PhysRevE.91.012918
SN  - 2470-0053
VL  - 91
IS  - 1
SP  - 012918
ER  - 
TY  - JOUR
A1  - Takenaga, Shoko
A1  - Schneider, Benno
A1  - Erbay, E.
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
JF  - Physica status solidi (a)
N2  - A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201532053
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1347
EP  - 1352
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - RPRT
A1  - Funke, Harald
A1  - Keinz, Jan
T1  - FHprofUnt2012: Adaption und Optimierung des Dry-Low-NOx-Micromix-Verfahrens für hohe Energiedichten für Wasserstoff und H2-reiche Synthesegase (Kurztitel: DLN-H2-Syngas-Verbrennung) : Veröffentlichung der Ergebnisse von Forschungsvorhaben im BMBF-Programm : Projektlaufzeit: 01.08.2012 bis 30.04.2015 : Förderkennzeichen: 03FH019PX2
Y1  - 2015
U6  - http://dx.doi.org/10.2314/GBV:86689893X
ER  - 
TY  - CHAP
A1  - Kilic, S. A.
A1  - Raatschen, Hans-Jürgen
A1  - Astaneh-Asl, A.
A1  - Apaydin, N. M.
T1  - Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge
T2  - Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges
Y1  - 2015
SN  - 9781138027572
SP  - 1169
EP  - 1173
PB  - CRC Press
CY  - Leiden
ER  - 
TY  - CHAP
A1  - Braun, Sebastian
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
A1  - Breuer, Michael
T1  - Forensische Sicherung von DSLRoutern
T2  - Proceedings of D-A-CH Security 2015. St. Augustin 8. und 9. September 2015
Y1  - 2015
ER  - 
TY  - BOOK
A1  - Tünnemann, Thomas
T1  - Formine : Postament - a private view in Kooperation mit A Trans Galerie, Berlin
N2  - Workshop Formine 2015 mit Projekten von Antonia Zajgia, Arnoud Charoy, Laura Viktoria Koch, Kai Stein, Ferdinand Klopfer, Florian D. Heinz, Tobias Scholz, Moritz Gnädinger, Pablo Raphael, Franko Scheuplein, Thomas Tünnemann, René Großner, Anny Phung, Mylenne Jakob-Wendel, Kira Joerißen, Florian Erber, Julian Wesse und Isolde Nagel
Y1  - 2015
SN  - 978-3-9811003-7-2
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - GEN
A1  - Olbertz, Klaus
T1  - Formularmäßiger Verzicht auf die Erhebung einer Kündigungsschutzklage ohne Kompensation verstößt gegen § 307 I 1 BGB
T2  - Gesellschafts- und Wirtschaftsrecht : GWR
Y1  - 2018
SN  - 1868-1816
N1  - Anm. zu BAG: Entscheidungsbesprechung zum Urteil v. 25.09.2014 - 2 AZR 788/13
SP  - 146
EP  - 146
ER  - 
TY  - BOOK
A1  - Müller, Bodo
A1  - Rath, Walter
T1  - Formulierung von Kleb- und Dichtstoffen: das kompetente Lehrbuch für Studium und Praxis
Y1  - 2015
SN  - 978-3-86630-605-9
PB  - Vincentz Network
CY  - Hannover
ET  - 3., vollst. überarb. Aufl.
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Cordero, Frederico
A1  - Dachwald, Bernd
A1  - Koncz, Alexander
A1  - Krause, Christian
A1  - Mikschl, Tobias
A1  - Montenegro, Sergio
A1  - Quantius, Dominik
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seefeldt, Patric
A1  - Tóth, Norbert
A1  - Wejmo, Elisabet
T1  - From Sail to Soil – Getting Sailcraft Out of the Harbour on a Visit to One of Earth’s Nearest Neighbours
T2  - 4th IAA Planetary Denfense Conference - PDC 2015,  13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
ER  - 
TY  - GEN
A1  - Olbertz, Klaus
T1  - Für Erfordernis einer Massenentlassungsanzeige zählen vom Arbeitgeber veranlasste Aufhebungsverträge mit
T2  - Gesellschafts- und Wirtschaftsrecht : GWR
Y1  - 2018
SN  - 1868-1816
N1  - Anm. zu BAG: Entscheidungsbesprechung zum Urteil v. 19.03.2015 - 8 AZR 119/14
SP  - 372
EP  - 372
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Mayer, Dirk
A1  - Schöning, Michael Josef
T1  - Gating capacitive field-effect sensors by the charge of nanoparticle/molecule hybrids
JF  - Nanoscale
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C4NR05987E
SN  - 2040-3372 (E-Journal); 2040-3364 (Print)
SP  - 1023
EP  - 1031
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - GEN
A1  - Olbertz, Klaus
T1  - Geltung eines Haustarifvertrages nach Verschmelzung nur im bisherigen Anwendungsbereich
T2  - Gesellschafts- und Wirtschaftsrecht : GWR
Y1  - 2018
SN  - 1868-1816
N1  - Anm. zu LAG Baden-Württemberg: Entscheidungsbesprechung zum Urteil v. 29.09.2014 - 9 Sa 19/14
SP  - 86
EP  - 86
ER  - 
TY  - CHAP
A1  - Roosen, Petra
A1  - Feyerl, Günter
T1  - Gender-specific perception and utilization of personal use vehicles
T2  - FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1
Y1  - 2015
SN  - 978-1-5108-0209-4
SP  - 418
EP  - 425
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
T1  - Generative Fertigungsverfahren in der Produktentwicklung
T2  - Spritzgießen 2015
Y1  - 2015
SN  - 978-3-18-234336-3
SP  - 1
EP  - 19
PB  - VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Feiser, Johannes
ED  - Vismann, Ulrich
T1  - Geotechnik
T2  - Wendehorst Bautechnische Zahlentafeln / 35. Auflage
N2  - In der nationalen und der europäischen Normung werden die geotechnischen Aufgaben zwecks Mindestanforderungen an Baugrunduntersuchung, rechnerische Nachweise und Überwachung der Ausführung in drei Klassen (Kategorien) eingeteilt. Sie richten sich nach der zu erwartenden Reaktion des Baugrundes, nach dem geotechnischen Schwierigkeitsgrad des Tragwerks und seiner Einflüsse auf die Umgebung.

In DIN 4020 wurde die Einteilung bezüglich Art und Umfang der geotechnischen Untersuchungen bereits verbindlich eingeführt.
Y1  - 2015
SN  - 978-3-658-01688-3 (Print)
SN  - 978-3-658-01689-0 (Online)
U6  - http://dx.doi.org/10.1007/978-3-658-01689-0_17
SP  - 1019
EP  - 1101
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Feiser, Johannes
T1  - Geotechnik
T2  - Wendehorst Beispiele aus der Baupraxis. / 5. Auflage
Y1  - 2015
SN  - 978-3-658-01689-0 ; 978-3-410-24199-7
U6  - http://dx.doi.org/10.1007/978-3-658-01681-4_14
SP  - 547
EP  - 598
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Vitting, Eva
A1  - Schmitz, Timo
A1  - Lenz, Florian
A1  - Querg, David
ED  - Schuh, Günther
T1  - Gib mir ein Zeichen! Visualisierunskonzepte, die Entscheidungshilfe bieten und versteckte Potentiale aufzeigen
T2  - Ergebnisbericht des BMBF-Verbundprojektes PROSENSE : hochauflösende Produktionssteuerung auf Basis kybernetischer Unterstützungssysteme und intelligenter Sensorik
Y1  - 2015
SN  - 978-3-86359-346-9
N1  - BMBF-Förderkennzeichen 02PJ2490
SP  - 148
EP  - 174
PB  - Apprimus-Verl.
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Rosin, J.
A1  - Henneböhl, B.
A1  - Butenweg, Christoph
T1  - Globale Stabilitätsanalysen zylindrischer, seismisch belasteter Tanks auf numerischer Grundlage
T2  - Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Zürich. (Dokumentation / SIA ; D 0255)
Y1  - 2015
SN  - 978-3-03732-060-0
SP  - 173
EP  - 180
PB  - SGEB
CY  - Zürich
ER  - 
TY  - BOOK
A1  - Kurz, Melanie
T1  - Handwerk oder Design : zur Ästhetik des Handgemachten
N2  - Manuelle Herstellung ist sozial fair, ökologisch nachhaltig und schafft qualitätsvolle Erzeugnisse! Vorbote für eine großformatige Rückkehr zum Handwerk und zur eigenhändigen Fertigung ist die Maker-Bewegung! – Solche Thesen begegnen uns gegenwärtig oft. Journalistische Texte, Filmdokumentationen, Werbung oder die Ästhetik von Produkten sind ihre Vehikel. Doch wie ist es um die Wiederbelebung des Handwerks tatsächlich bestellt? Und in welchem Verhältnis steht das Design – ein durch und durch industriebasiertes Berufsfeld – zu vorindustriellen Produktionsweisen? Diesen Fragen geht das vorliegende Buch ebenso auf den Grund wie der seit Beginn der Industrialisierung auftretenden Handwerksromantik. Es untersucht zudem, wie aktuelles Design die Sehnsucht nach dem Ursprünglichen mit formalen Kodes beantwortet und wie die visuellen Erscheinungsformen des Handgemachten ihre Wirkung freisetzen.
Y1  - 2015
SN  - 978-3-7705-5943-5 (Druckausgabe)
SN  - 978-3-8467-5943-1 (E-Book)
U6  - http://dx.doi.org/10.30965/9783846759431
PB  - Fink
CY  - Paderborn
ER  - 
TY  - JOUR
A1  - Klinge, Uwe
A1  - Otto, Jens
A1  - Mühl, Thomas
T1  - High Structural Stability of Textile Implants Prevents Pore Collapse and Preserves Effective Porosity at Strain
JF  - BioMed Research International
Y1  - 2015
U6  - http://dx.doi.org/10.1155/2015/953209
SN  - 2314-6133 (Print)
SN  - 2314-6141 (Online)
N1  - Article ID: 953209
VL  - 2015
ER  - 
TY  - JOUR
A1  - Voigt, Birgit
A1  - Albrecht, Dirk
A1  - Sievers, Susanne
A1  - Becher, Dörte
A1  - Bongaerts, Johannes
A1  - Evers, Stefan
A1  - Schweder, Thomas
A1  - Maurer, Karl-Heinz
A1  - Hecker, Michael
T1  - High-resolution proteome maps of Bacillus licheniformis cells growing in minimal medium
JF  - Proteomics
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pmic.201400504
SN  - 1615-9861
VL  - 15
IS  - 15
SP  - 2629
EP  - 2633
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Pricking, Sebastian
A1  - Gebs, Raphael
A1  - Fleischhaker, Robert
A1  - Kleinbauer, Jochen
A1  - Budnicki, Aleksander
A1  - Sutter, Dirk
A1  - Killi, Alexander
A1  - Weiler, Sascha
A1  - Mielke, M.
A1  - Beaudou, B.
A1  - Debord, B.
A1  - Gerome, F.
A1  - Benabid, F.
ED  - Dorsch, Friedhelm
T1  - Hollow core fiber delivery of sub-ps pulses from a TruMicro 5000 Femto edition thin disk amplifier
T2  - High-power laser materials processing: Lasers, beam delivery, diagnostics, and applications IV : 7 Februar 2015, San Francisco, USA. - (SPIE proceedings series ; 9356)
Y1  - 2015
SN  - 978-162841446-2
U6  - http://dx.doi.org/10.1117/12.2079289
SN  - 0277-786X
SP  - 935602
PB  - SPIE, International Society for Optical Engineering
ER  - 
TY  - BOOK
A1  - Nebgen, Nikolaus
A1  - Peterson, Leif Arne
T1  - Holzbau kompakt nach Eurocode 5
N2  - "Holzbau kompakt" wurde sowohl für Studierende als auch Praktiker konzipiert und beschränkt sich nicht auf reine Holzbauaufgaben, sondern setzt sich ggf. auch mit der Tragwerkslehre auseinander. Die Neuauflage basiert auf dem Eurocode 5 und berücksichtigt zahlreiche neue Erkenntnisse aus Forschung und praxisnaher Entwicklung. Neben den Grundlagen der Bemessung, der Baustoffe, der Dauerhaftigkeit und des Brandschutzes konzentriert sich das Grundlagenwerk besonders auf das Konstruieren mit Holz und Holzwerkstoffen, anschaulich dargestellt an sehr ausführlichen Beispielen für Wohnhaus und Hallentragwerk.
Y1  - 2015
SN  - 978-3-410-25455-3
PB  - Beuth
CY  - Berlin
ET  - 5. Auflage
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Nithiarasu, Perumal
T1  - Homogenization of a cardiac tissue construct
T2  - CMBE15 : 4th International Conference on Computational & Mathematical Biomedical Engineering ; 29th June - 1st July 2015 ; École Normale Supérieure de Cachan ; Cachan (Paris), France
Y1  - 2015
SN  - 2227-9385
N1  - Konferenzband unter:
http://www.compbiomed.net/getfile.php?type=12/site_documents&id=Proceedings_2227-9385_compressed.pdf
SP  - 645
EP  - 648
PB  - CMBE
CY  - [s.l.]
ER  - 
TY  - JOUR
A1  - Geier, Christian
A1  - Bialonski, Stephan
A1  - Elger, Christian E.
A1  - Lehnertz, Klaus
T1  - How important is the seizure onset zone for seizure dynamics?
JF  - Seizure
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.seizure.2014.10.013
SN  - 1059-1311
VL  - 25
SP  - 160
EP  - 166
ER  - 
TY  - JOUR
A1  - Klettke, Tanja
A1  - Homburg, Carsten
A1  - Gell, Sebastian
T1  - How to measure analyst forecast effort
JF  - European Accounting Review
N2  - We introduce a new way to measure the forecast effort that analysts devote to their earnings forecasts by measuring the analyst's general effort for all covered firms. While the commonly applied effort measure is based on analyst behaviour for one firm, our measure considers analyst behaviour for all covered firms. Our general effort measure captures additional information about analyst effort and thus can identify accurate forecasts. We emphasise the importance of investigating analyst behaviour in a larger context and argue that analysts who generally devote substantial forecast effort are also likely to devote substantial effort to a specific firm, even if this effort might not be captured by a firm-specific measure. Empirical results reveal that analysts who devote higher general forecast effort issue more accurate forecasts. Additional investigations show that analysts' career prospects improve with higher general forecast effort. Our measure improves on existing methods as it has higher explanatory power regarding differences in forecast accuracy than the commonly applied effort measure. Additionally, it can address research questions that cannot be examined with a firm-specific measure. It provides a simple but comprehensive way to identify accurate analysts.
Y1  - 2015
U6  - http://dx.doi.org/10.1080/09638180.2014.909291
SN  - 0963-8180
VL  - 24
IS  - 1
SP  - 129
EP  - 146
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Hybrid investigation of air transport processes in moderately sloped stepped spillway flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - THES
A1  - Duong, Minh Tuan
T1  - Hyperelastic modeling and soft-tissue growth integrated with the smoothed finite element method - SFEM
Y1  - 2015
N1  - Aachen, Techn. Hochsch., Diss., 2014
PB  - RWTH Aachen University
ER  - 
TY  - CHAP
A1  - Bonney, Gregor
A1  - Höfken, Hans-Wilhelm
A1  - Paffen, Benedikt
A1  - Schuba, Marko
T1  - ICS/SCADA Security - Analysis of a Beckhoff CX5020 PLC
T2  - 1st International Conference on Information Systems Security and Privacy : ICISSP 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
T1  - Image processing for bubble image velocimetry in self-aerated flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Delle, Lotta E.
A1  - Huck, Christina
A1  - Bäcker, Matthias
A1  - Müller, Frank
A1  - Grandthyll, Samuel
A1  - Jacobs, Karin
A1  - Lilischkis, Rainer
A1  - Vu, Xuan T.
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
A1  - Thoelen, Roland
A1  - Weil, Maryam
A1  - Ingebrandt, Sven
T1  - Impedimetric immunosensor for the detection of histamine based on reduced graphene oxide
JF  - Physica status solidi (a)
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431863
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1327
EP  - 1334
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Striegan, Constantin
A1  - Bohn, D.
T1  - Improvement study for the dry-low-NOx hydrogen micromix combustion technology
JF  - Propulsion and power research
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.jppr.2015.07.003
SN  - 2212-540X
VL  - Vol. 4
IS  - Iss. 3
SP  - 132
EP  - 140
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Gebhardt, Andreas
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Tedjasukmana, Osmond Sanjaya
T1  - Improving additive manufacturing by image processing and robotic milling
T2  - 2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden
Y1  - 2015
U6  - http://dx.doi.org/10.1109/CoASE.2015.7294217
SP  - 924
EP  - 929
ER  - 
TY  - CHAP
A1  - Kümmell, Steffen
A1  - Hillgärtner, Michael
T1  - Inductive charging comfortable and nonvisible charging stations for urbanised areas
T2  - E-Mobility in Europe : trends and good practice
N2  - For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today’s state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles’ needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future’s inductive charging infrastructures, several field tests had been carried out and are planned in near future.
KW  - E-mobility
KW  - Inductive charging
KW  - Charging stations
KW  - Urban areas
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_16
SP  - 297
EP  - 309
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - JOUR
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Tran, Thanh Ngoc
A1  - Tolba, R. H.
A1  - Staat, Manfred
T1  - Influence of refrigerated storage on tensile mechanical properties of porcine liver and spleen
JF  - International biomechanics
Y1  - 2015
U6  - http://dx.doi.org/10.1080/23335432.2015.1049295
SN  - 2333-5432
VL  - Vol. 2
IS  - Iss. 1
SP  - 79
EP  - 88
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Rahier, Michael
A1  - Ritz, Thomas
A1  - Wallenborn, Ramona
T1  - Information and communication technology for integrated mobility concepts such as E-carsharing
T2  - E-Mobility in Europe : trends and good practice
N2  - During the past decade attitude towards sharing things has changed extremely. Not just personal data is shared (e.g. in social networks) but also mobility. Together with the increased ecological awareness of the recent years, new mobility concepts have evolved. E-carsharing has become a symbol for these changes of attitude. The management of a shared car fleet, the energy management of electric mobility and the management of various carsharing users with individual likes and dislikes are just some of the major challenges of e-carsharing. Weaving it into integrated mobility concepts, this raises complexity even further. These challenges can only be overcome by an appropriate amount of well-shaped information available at the right place and time. In order to gather, process and share the required information, fleet cars have to be equipped with modern information and communication technology (ICT) and become so-called fully connected cars. Ensuring the usability of these ICT systems is another challenge that is often neglected, even though it is usability that makes carsharing comfortable, attractive and supports users’ new attitudes. By means of an integrated and consistent concept for human-machine interaction (HMI), the usability of such systems can be raised tremendously.
KW  - Information and communication technology
KW  - Fully connected car
KW  - E-carsharing
KW  - Mobility management
KW  - Integrated mobility
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - http://dx.doi.org/10.1007/978-3-319-13194-8_17
SP  - 311
EP  - 326
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - BOOK
A1  - Janser, Frank
A1  - Havermann, Marc
T1  - Inkompressible Strömungen
Y1  - 2015
SN  - 978-3-86130-446-3
N1  - Strömungslehre
und Aerodynamik ; 1
PB  - Verlagshaus Mainz GmbH
CY  - Aachen
ET  - 3. Aufl.
ER  - 
TY  - RPRT
A1  - Chwallek, Constanze
A1  - Radach, Karina
A1  - Schieferdecker, Richard
T1  - Innovation im Mittelstand : Studie zur Innovationsfähigkeit  kleiner  und mittlerer Unternehmen in der Region Aachen
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Wiezik, P.
A1  - Hötter, Jan-Steffen
A1  - Gebhardt, Andreas
T1  - Integration des Laserpolierens in den SLM-Prozess
T2  - DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, Fügen von faserverstärkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vorträge der Veranstaltungen, Nürnberg, DE, 15.-17. Sep, 2015
Y1  - 2015
SN  - 978-3-945023-46-4
VL  - 315
SP  - 117
EP  - 120
PB  - Verl. für Schweißen und verwandte Verfahren, DVS-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Krückel, Kai
A1  - Nolden, Florian
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - Intuitive visual teleoperation for UGVs using free-look augmented reality displays
T2  - 2015 IEEE International Conference on Robotics and Automation (ICRA), Seattle, WA
Y1  - 2015
U6  - http://dx.doi.org/10.1109/ICRA.2015.7139809
SP  - 4412
EP  - 4417
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - IO-Link – für smarte Sensoren
JF  - elektroniknet.de
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Goldmann, Jan-Peter
A1  - Braunstein, Bjoern
A1  - Heinrich, Kai
A1  - Sanno, Maximilian
A1  - Stäudle, Benjamin
A1  - Ritzdorf, Wolfgang
A1  - Brüggemann, Gert-Peter
A1  - Albracht, Kirsten
T1  - Joint work of the take-off leg during elite high jump
T2  - Proceedings of the 33th International Conference on Biomechanics in Sports (ISBS)
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Abel, Thomas
A1  - Bonin, Dominik
A1  - Albracht, Kirsten
A1  - Zeller, Sebastian
A1  - Burkett, Brendan
T1  - Kinematische Untersuchung der Kurbelbewegung im Handcycling: Entwicklung einer sportartspezifischen Methode
T2  - Behindertensport 1951-2011 : Historische und aktuelle Aspekte im nationalen und internationalen Dialog
Y1  - 2015
SN  - 9783898997249
SP  - 82
EP  - 91
PB  - Meyer & Meyer
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Kroll-Ludwigs, Kathrin
ED  - Rauscher, Thomas
T1  - Kommentierung zu EU-EheGüterVO-E
T2  - Europäisches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV
Y1  - 2015
SN  - 978-3-504-38437-1
U6  - http://dx.doi.org/10.9785/9783504384371-007
SP  - 1081
EP  - 1146
PB  - Verlag Dr. Otto Schmidt
CY  - Köln
ET  - 4., neu bearbeitete Auflage
ER  - 
TY  - CHAP
A1  - Kroll-Ludwigs, Kathrin
ED  - Rauscher, Thomas
T1  - Kommentierung zu EU-LP-GüterVO
T2  - Europäisches Zivilprozess- und Kollisionsrecht EuZPR/EuIPR, Band IV
Y1  - 2015
SN  - 978-3-504-38437-1
U6  - http://dx.doi.org/10.9785/9783504384371-008
SP  - 1147
EP  - 1188
PB  - Verlag Dr. Otto Schmidt
CY  - Köln
ET  - 4., neu bearbeitete Auflage
ER  - 
TY  - CHAP
A1  - Billerbeck, Katrin
A1  - Ladwig, Tina
A1  - Salden, Peter
A1  - Barnat, Miriam
ED  - Kammasch, Gudrun
T1  - Kompetenzen visualisieren als Notenersatz? Annäherung an eine didaktische Herausforderung
T2  - Wie viel (Grundlagen) Wissen braucht technische Bildung? : Wege zu technischer Bildung : Referate der 9. Ingenieurpädagogischen Regionaltagung 2014 an der Universität Siegen, 6.-8. November 2014
Y1  - 2015
SN  - 978-3-00-049835-0
N1  - Ingenieurpädagogische Regionaltagung <9., 2014, Siegen>
SP  - 57
EP  - 63
PB  - Berlin
CY  - IPW
ER  - 
TY  - JOUR
A1  - Fissabre, Anke
T1  - Konstruktion und Raumform im Kirchenbau der Moderne : Die Längsbinderkirchen von Hans Herkommer
JF  - In situ : Zeitschrift für Architekturgeschichte
Y1  - 2015
SN  - 1866-959X
VL  - 7
IS  - 1
SP  - 117
EP  - 124
PB  - Wernersche Verlagsgesellschaft
CY  - Worms
ER  - 
TY  - JOUR
A1  - Timme, Michael
T1  - Kündigung - Die Vorhersehbarkeit eines zukünftigen Eigenbedarfs für den Vermieter
JF  - Monatsschrift für Deutsches Recht : MDR : Zeitschrift für die Zivilrechts-Praxis
Y1  - 2015
SN  - 0340-1812
VL  - 69
IS  - 9
SP  - 489
EP  - 490
PB  - Verlag Dr. Otto Schmidt
CY  - Köln
ER  - 
TY  - JOUR
A1  - Wu, Chunsheng
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Werner, Frederik
A1  - Schöning, Michael Josef
T1  - Label-free detection of DNA using light-addressable potentiometric sensor modified with a positively charged polyelectrolyte layer
JF  - Nanoscale
N2  - A multi-spot (16 spots) light-addressable potentiometric sensor (MLAPS) consisting of an Al–p-Si–SiO2 structure modified with a weak polyelectrolyte layer of PAH (poly(allylamine hydrochloride)) was applied for the label-free electrical detection of DNA (deoxyribonucleic acid) immobilization and hybridization by the intrinsic molecular charge for the first time. To achieve a preferentially flat orientation of DNA strands and thus, to reduce the distance between the DNA charge and MLAPS surface, the negatively charged probe single-stranded DNAs (ssDNA) were electrostatically adsorbed onto the positively charged PAH layer using a simple layer-by-layer (LbL) technique. In this way, more DNA charge can be positioned within the Debye length, yielding a higher sensor signal. The surface potential changes in each spot induced due to the surface modification steps (PAH adsorption, probe ssDNA immobilization, hybridization with complementary target DNA (cDNA), non-specific adsorption of mismatched ssDNA) were determined from the shifts of photocurrent–voltage curves along the voltage axis. A high sensor signal of 83 mV was registered after immobilization of probe ssDNA onto the PAH layer. The hybridization signal increases from 5 mV to 32 mV with increasing the concentration of cDNA from 0.1 nM to 5 μM. In contrast, a small signal of 5 mV was recorded in the case of non-specific adsorption of fully mismatched ssDNA (5 μM). The obtained results demonstrate the potential of the MLAPS in combination with the simple and rapid LbL immobilization technique as a promising platform for the future development of multi-spot light-addressable label-free DNA chips with direct electrical readout.
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C4NR07225A
VL  - 14
IS  - 7
SP  - 6143
EP  - 6150
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Bronder, Thomas
A1  - Wu, Chunsheng
A1  - Schöning, Michael Josef
T1  - Label-free sensing of biomolecules by their intrinsic molecular charge using field-effect devices
T2  - Semiconductor Micro- and Nanoelectonics : Proceedings of the tenth international conference, Yerevan, Armenia, September 11-13
Y1  - 2015
SN  - 978-5-8084-1991-9
SP  - 61
EP  - 63
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
ED  - Rowinski, Pawel
T1  - Laboratory models of free-surface flows
T2  - Rivers - physical, fluvial and environmental processes
N2  - Hydraulic modeling is the classical approach to investigate and describe complex fluid motion. Many empirical formulas in the literature used for the hydraulic design of river training measures and structures have been developed using experimental data from the laboratory. Although computer capacities have increased to a high level which allows to run complex numerical simulations on standard workstation nowadays, non-standard design of structures may still raise the need to perform physical model investigations. These investigations deliver insight into details of flow patterns and the effect of varying boundary conditions. Data from hydraulic model tests may be used for calibration of numerical models as well. As the field of hydraulic modeling is very complex, this chapter intends to give a short overview on capacities and limits of hydraulic modeling in regard to river flows and hydraulic structures only. The reader shall get a first idea of modeling principles and basic considerations. More detailed information can be found in the references.
KW  - Physical modeling
KW  - Similitude
KW  - Open channels
KW  - Hydraulic structures
Y1  - 2015
SN  - 978-3-319-17718-2 ; 978-3-319-17719-9
U6  - http://dx.doi.org/10.1007/978-3-319-17719-9_9
SP  - 213
EP  - 228
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Seefeldt, Patric
A1  - Bauer, Waldemar
A1  - Dachwald, Bernd
A1  - Grundmann, Jan Thimo
A1  - Straubel, Marco
A1  - Sznajder, Maciej
A1  - Tóth, Norbert
A1  - Zander, Martin E.
T1  - Large lightweight deployable structures for planetary defence: solar sail propulsion, solar concentrator payloads, large-scale photovoltaic power
T2  - 4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
N1  - IAA-PDC-15-P-20
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Reichert, Walter
T1  - Learning to Program Mobile Robots in the ROS Summer School Series
T2  - Proceedings 6th International Conference on Robotics in Education (RiE 15)
N2  - The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Wilke, Thomas
T1  - Lepautre
T2  - Allgemeines Künstler-Lexikon. Bd. 84
Y1  - 2015
SN  - 978-3-11-023189-2
N1  - unter besonderer Berücksichtigung von Antoine, Jean und Pierre Lepautre;
namentlich gekennzeichneter Lexikon-Eintrag
SP  - 157
EP  - 160
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Dantism, S.
A1  - Takenaga, S.
A1  - Wagner, P.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Light-addressable Potentiometric Sensor (LAPS) Combined with Multi-chamber Structures to Investigate the Metabolic Activity of Cells
JF  - Procedia Engineering
N2  - LAPS are field-effect-based potentiometric sensors which are able to monitor analyte concentrations in a spatially resolved manner. Hence, a LAPS sensor system is a powerful device to record chemical imaging of the concentration of chemical species in an aqueous solution, chemical reactions, or the growth of cell colonies on the sensor surface, to record chemical images. In this work, multi-chamber 3D-printed structures made out of polymer (PP-ABS) were combined with LAPS chips to analyse differentially and simultaneously the metabolic activity of Escherichia coli K12 and Chinese hamster ovary (CHO) cells, and the responds of those cells to the addition of glucose solution.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.647
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 384
EP  - 387
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Kirschbaum, M.
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, R.
A1  - Wagner, Torsten
T1  - Light-controllable polymeric material based on temperature-sensitive hydrogels with incorporated graphene oxide
JF  - Physica status solidi (a)
N2  - Poly(N-isopropylacrylamide) (PNIPAAm) hydrogel films with incorporated graphene oxide (GO) were developed and tested as light-stimulated actuators. GO dispersions were synthesized via Hummers method and characterized toward their optical properties and photothermal energy conversion. The hydrogels were prepared by means of photopolymerization. In addition, the influence of GO within the hydrogel network on the lower critical solution temperature (LCST) was investigated by differential scanning calorimetry (DSC). The optical absorbance and the response to illumination were determined as a function of GO concentration for thin hydrogel films. A proof of principle for the stimulation with light was performed.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431944
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1368
EP  - 1374
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Light-stimulated hydrogel actuators with incorporated graphene oxide for microfluidic applications
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P5.8
SP  - 206
EP  - 209
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Hailer, Benjamin
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
T2  - Proceedings of SAMPE Europe Conference, Amiens , France
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Weber, Tobias
T1  - Manufacturing Process Simulation for Tooling Optimization: Reduction of Quality Issues During Autoclave Manufacturing of Composite Parts
T2  - Proceedings of SAMPE Europe Conference 2015, Amiens, France
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Bühler, P.
A1  - Leandro, J.
A1  - Bung, Daniel B.
A1  - Lopes, P.
A1  - Carvalho, R.
T1  - Measuring void fraction of a stepped spillway with non-intrusive methods using different image resolutions
T2  - 2nd International Workshop on Hydraulic Structures : Data Validation : Coimbra, Portugal, 8-9 May 2015
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - PAT
A1  - Stadtmüller, Ralf
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Method for production of single-stranded macronucleotides
N2  - The invention relates to a method for production of single-stranded macronucleotides by amplifying and ligating an extended monomeric single-stranded target nucleic acid sequence (targetss) into a repetitive cluster of double-stranded target nucleic acid sequences (targetds), and subsequently cloning the construct into a vector (aptagene vector). The aptagene vector is transformed into host cells for replication of the aptagene and isolated in order to optain single-stranded target sequences (targetss). The invention also relates to single-stranded nucleic acids, produced by a method of the invention.
Y1  - 2015
N1  - Patent auch unter EP2774996, EP2774996, US2017145460 und US9944966 veröffentlicht.
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, N. H.
A1  - Staat, Manfred
T1  - Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Theis, Jochen
A1  - Krisnamurthy, Hemanth Kumar
A1  - Schmitz, Günter
ED  - Jamal, Rahman
T1  - Modellbasierte Simulation und experimentelle Anwendung von mechatronischen Systemen in der Lehre in Verbindung mit NI myRIO und dem NI LabVIEW Interface Toolkit
T2  - Virtuelle Instrumente in der Praxis 2015 : Mess-, Steuer-, Regel- und Embedded-Systeme; Begleitband zum 20. VIP-Kongress
Y1  - 2015
SN  - 978-3-8007-3669-0
SP  - 362
EP  - 365
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Modelling strategies for horizontally loaded infill masonry
T1  - Modellierungsansätze für horizontal beanspruchtes Ausfachungsmauerwerk
JF  - Mauerwerk : European journal of masonry
Y1  - 2015
U6  - http://dx.doi.org/10.1002/dama.201500675
VL  - Volume 19
IS  - Issue 5
SP  - 363
EP  - 369
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Czarnecki, Christian
T1  - Moderne Telekommunikationsprodukte erfordern standardisierte 
Geschäftsprozesse
JF  - Wirtschaft und Wissenschaft
Y1  - 2015
IS  - 2
SP  - 7
EP  - 7
PB  - Deutsche Telekom AG. Fachhochschule Leipzig
CY  - Leipzig
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, Maximillian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Monitoring of the Enzymatically Catalyzed Degradation of Biodegradable Polymers by Means of Capacitive Field-Effect Sensors
JF  - Analytical Chemistry
N2  - Designing novel or optimizing existing biodegradable polymers for biomedical applications requires numerous tests on the effect of substances on the degradation process. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) sensors have been applied for monitoring an enzymatically catalyzed degradation of polymers for the first time. The thin films of biodegradable polymer poly(d,l-lactic acid) and enzyme lipase were used as a model system. During degradation, the sensors were read-out by means of impedance spectroscopy. In order to interpret the data obtained from impedance measurements, an electrical equivalent circuit model was developed. In addition, morphological investigations of the polymer surface have been performed by means of in situ atomic force microscopy. The sensor signal change, which reflects the progress of degradation, indicates an accelerated degradation in the presence of the enzyme compared to hydrolysis in neutral pH buffer media. The degradation rate increases with increasing enzyme concentration. The obtained results demonstrate the potential of PMEIS sensors as a very promising tool for in situ and real-time monitoring of degradation of polymers.
Y1  - 2015
U6  - http://dx.doi.org/10.1021/acs.analchem.5b00617
SN  - 1520-6882
VL  - 87
IS  - 13
SP  - 6607
EP  - 6613
PB  - ACS Publications
CY  - Washington, DC
ER  - 
TY  - CHAP
A1  - Rebel, Sören
A1  - Hüning, Felix
A1  - Scholl, Ingrid
A1  - Ferrein, Alexander
T1  - MQOne: Low-cost design for a rugged-terrain robot platform
T2  - Intelligent robotics and applications : 8th International Conference, ICIRA 2015, Portsmouth, UK, August 24-27, 2015, Proceedings, Part II (Lecture notes in computer science : vol. 9245)
N2  - Rugged terrain robot designs are important for field robotics missions. A number of commercial platforms are available, however, at an impressive price. In this paper, we describe the hardware and software component of a low-cost wheeled rugged-terrain robot. The robot is based on an electric children quad bike and is modified to be driven by wire. In terms of climbing properties, operation time and payload it can compete with some of the commercially available platforms, but at a far lower price.
Y1  - 2015
SN  - 978-3-319-22875-4 (print) ; 978-3-319-22876-1 (E-Book)
U6  - http://dx.doi.org/10.1007/978-3-319-22876-1_19
SP  - 209
EP  - 221
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Reisert, Steffen
A1  - Kramer, Friederike
A1  - Begoyan, Vardges K.
A1  - Buniatyan, Vahe V.
A1  - Schöning, Michael Josef
T1  - Multi-parameter sensing using high-k oxide of barium strontium titanate
JF  - Physica status solidi (a)
N2  - High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors. In this work, a Si-based sensor chip containing Pt interdigitated electrodes covered with a thin BST layer (485 nm) has been developed for multi-parameter chemical sensing. The chip has been applied for the contactless measurement of the electrolyte conductivity, the detection of adsorbed charged macromolecules (positively charged polyelectrolytes of polyethylenimine) and the concentration of hydrogen peroxide (H2O2) vapor. The experimental results of functional testing of individual sensors are presented. The mechanism of the BST sensitivity to charged polyelectrolytes and H2O2 vapor has been proposed and discussed.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431911
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1259
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Pöttgen, Philipp
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
ED  - Pelz, Peter F.
ED  - Groche, Peter
T1  - Multicriterial optimization of technical systems considering multiple load and availability scenarios
JF  - Applied Mechanics and Materials
N2  - Cheap does not imply cost-effective -- this is rule number one of zeitgeisty system design. The initial investment accounts only for a small portion of the lifecycle costs of a technical system. In fluid systems, about ninety percent of the total costs are caused by other factors like power consumption and maintenance. With modern optimization methods, it is already possible to plan an optimal technical system considering multiple objectives. In this paper, we focus on an often neglected contribution to the lifecycle costs: downtime costs due to spontaneous failures. Consequently, availability becomes an issue.
KW  - sustainability
KW  - availability
KW  - energy efficiency
KW  - mixed-integer linear programming
KW  - system synthesis
Y1  - 2015
SN  - 1660-9336
U6  - http://dx.doi.org/10.4028/www.scientific.net/AMM.807.247
VL  - 807
SP  - 247
EP  - 256
ER  - 
TY  - JOUR
A1  - Reisert, Steffen
A1  - Geissler, H.
A1  - Weiler, C.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Multiple sensor-type system for monitoring the microbicidal effectiveness of aseptic sterilisation processes
JF  - Food control
N2  - The present work describes a novel multiple sensor-type system for the real-time analysis of aseptic sterilisation processes employing gaseous hydrogen peroxide (H2O2) as a sterilant. The inactivation kinetics of Bacillus atrophaeus by gaseous H2O2 have been investigated by means of a methodical calibration experiment, taking into account the process variables H2O2 concentration, humidity and gas temperature. It has been found that the microbicidal effectiveness at H2O2 concentrations above 2% v/v is largely determined by the concentration itself, while at lower H2O2 concentrations, the gas temperature and humidity play a leading role. Furthermore, the responses of different types of gas sensors towards the influencing factors of the sterilisation process have been analysed within the same experiment. Based on a correlation established between the inactivation kinetics and the sensor responses, a calorimetric H2O2 sensor and a metal-oxide semiconductor (MOX) sensor have been identified as possible candidates for monitoring the microbicidal effectiveness of aseptic sterilisation processes employing gaseous H2O2. Therefore, two linear models that describe the relationship between sensor response and microbicidal effectiveness have been proposed.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.foodcont.2014.07.063
SN  - 1873-7129 (E-Journal); 0956-7135 (Print)
VL  - 47
SP  - 615
EP  - 622
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Balmes, Jan P.
A1  - Bung, Daniel B.
T1  - Numerical simulation of erosion processes on crossbar block ramps
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Numerische Strömungssimulationen von Fließgewässern : Praxisanwendungen und zukünftige Entwicklungen
JF  - Korrespondenz Wasserwirtschaft : KW
Y1  - 2015
SN  - 1616-430X
VL  - 8
IS  - H. 3
SP  - 177
EP  - 182
PB  - Gesellschaft zur Förderung der Abwassertechnik
CY  - Hennef
ER  - 
TY  - CHAP
A1  - Bischof, Michael
A1  - Ey, Ludger
A1  - Kuck, Alexander
A1  - Rahier, Michael
A1  - Ritz, Thomas
ED  - Weisbecker, Anette
T1  - Nutzerzentrierte Gestaltung und Entwicklung eines kontextsensitiven HMI
T2  - Mensch und Computer 2015 : Workshop
Y1  - 2015
SN  - 978-3-11-044333-2
SP  - 467
EP  - 474
PB  - De Gruyter Oldenbourg
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Golland, Alexander
A1  - Engling, Christoph
T1  - Offene und geschlossene WLAN: Rechtliche Hürden bei Betrieb eines öffentlichen Internetzugangs
JF  - DSB Datenschutz-Berater
Y1  - 2015
SN  - 0170-7256
VL  - 39
IS  - 5
SP  - 102
EP  - 103
PB  - Beck
CY  - Gütersloh
ER  - 
TY  - JOUR
A1  - Baringhaus, Ludwig
A1  - Gaigall, Daniel
T1  - On an independence test approach to the goodness-of-fit problem
JF  - Journal of Multivariate Analysis
N2  - Let X₁,…,Xₙ be independent and identically distributed random variables with distribution F. Assuming that there are measurable functions f:R²→R and g:R²→R characterizing a family F of distributions on the Borel sets of R in the way that the random variables f(X₁,X₂),g(X₁,X₂) are independent, if and only if F∈F, we propose to treat the testing problem H:F∈F,K:F∉F by applying a consistent nonparametric independence test to the bivariate sample variables (f(Xᵢ,Xⱼ),g(Xᵢ,Xⱼ)),1⩽i,j⩽n,i≠j. A parametric bootstrap procedure needed to get critical values is shown to work. The consistency of the test is discussed. The power performance of the procedure is compared with that of the classical tests of Kolmogorov–Smirnov and Cramér–von Mises in the special cases where F is the family of gamma distributions or the family of inverse Gaussian distributions.
KW  - Goodness-of-fit test
KW  - Independence test
KW  - Parametric bootstrap
KW  - Vapnik–Čhervonenkis class
KW  - Gamma distribution
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.jmva.2015.05.013
SN  - 0047-259X
VL  - 2015
IS  - 140
SP  - 193
EP  - 208
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schneider, Felix
A1  - Tran, Duc Hung
T1  - On the relation between the fair value option and bid-ask spreads: descriptive evidence on the recognition of credit risk changes under IFRS
JF  - Journal of Business Economics
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s11573-015-0776-2
SN  - 1861-8928
VL  - 85
IS  - 9
SP  - 1049
EP  - 1081
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Yang, Peng-Fei
A1  - Kriechbaumer, Andreas
A1  - Albracht, Kirsten
A1  - Sanno, Maximilian
A1  - Ganse, Bergita
A1  - Koy, Timmo
A1  - Shang, Peng
A1  - Brüggemann, Gert-Peter
A1  - Müller, Lars Peter
A1  - Rittweger, Jörn
T1  - On the relationship between tibia torsional deformation and regional muscle contractions in habitual human exercises in vivo
JF  - Journal of Biomechanics
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.jbiomech.2014.12.031
SN  - 0021-9290
VL  - 48
IS  - 3
SP  - 456
EP  - 464
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - Operational modal analysis of a cantilever in a wind tunnel using optical fiber bragg grating sensors
T2  - 6th International Operational Modal Analysis Conference. IOMAC´15. 2015 May 12-14 Gijon - Spain
Y1  - 2015
U6  - http://dx.doi.org/10.13140/RG.2.1.3753.0324
ER  - 
TY  - JOUR
A1  - Hough, Lindsay B.
A1  - Nalwalk, Julia W.
A1  - Ding, Xinxin
A1  - Scheer, Nico
T1  - Opioid Analgesia in P450 Gene Cluster Knockout Mice: A Search for Analgesia-Relevant Isoforms
JF  - Drug Metabolism and Disposition
Y1  - 2015
U6  - http://dx.doi.org/10.1124/dmd.115.065490
SN  - 1521-009x
VL  - 43
IS  - 9
SP  - 1326
EP  - 1330
ER  - 
TY  - JOUR
A1  - Pilas, Johanna
A1  - Mariano, K.
A1  - Keusgen, M.
A1  - Selmer, Thorsten
A1  - Schöning, Michael Josef
T1  - Optimization of an Enzyme-based Multi-parameter Biosensor for Monitoring Biogas Processes
JF  - Procedia Engineering
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.702
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 532
EP  - 535
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bank, Bart L. van de
A1  - Orzada, Stephan
A1  - Smits, Frits
A1  - Lagemaat, Miriam W.
A1  - Rodgers, Christopher T.
A1  - Bitz, Andreas
A1  - Scheenen, Tom W. J.
T1  - Optimized (31) P MRS in the human brain at 7 T with a dedicated RF coil setup
JF  - NMR in Biomedicine
Y1  - 2015
U6  - http://dx.doi.org/10.1002/nbm.3422
SN  - 1099-1492
VL  - 28
IS  - 11
SP  - 1570
EP  - 1578
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Großmann, Agnes
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Overview of the MultiRob 3D Lunar Industrial Development Project
T2  - Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Taddei, Francesca
A1  - Butenweg, Christoph
A1  - Klinkel, S.
T1  - Parametric investigation of the soil-structure interaction effects on the dynamic behaviour of a shallow foundation supported wind turbine considering a layered soil
JF  - Wind energy : an international journal for progress and applications in wind power conversion technology
Y1  - 2015
U6  - http://dx.doi.org/10.1002/we.1703
SN  - 1099-1824 (E-Journal); 1095-4244 (Print)
VL  - Volume 18
IS  - Issue 3
SP  - 399
EP  - 417
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Matcha, Heike
ED  - Martens, B.
T1  - Parametrized Systems: Conceiving of Buildings as Assemblies of Varied Parts
JF  - Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015
Y1  - 2015
SP  - 143
EP  - 148
ER  - 
TY  - RPRT
A1  - Damm, Marc André
A1  - Anthrakidis, Anette
A1  - Fend, Thomas
T1  - Partikelminderungssystem mit einstellbarem Partikelrückhaltegrad : Varytrap : Schlussbericht : Laufzeit: 01.07.2010-28.02.2014
Y1  - 2015
U6  - http://dx.doi.org/10.2314/GBV:848651863
N1  - Report-Nr: 17012X10
CY  - Jülich
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Martens, D.
A1  - Liu, X.
A1  - Bienstman, P.
A1  - Fahlman, M.
A1  - Schöning, Michael Josef
A1  - Michiels, L.
A1  - Haenen, K.
A1  - Serpengüzel, A.
A1  - Wagner, Patrick
T1  - Photonic studies on polymer-coated sapphire-spheres : a model system for biological ligands
JF  - Sensors and actuators A: Physical
N2  - In this study we show an optical biosensor concept, based on elastic light scattering from sapphire microspheres. Transmitted and elastic scattering intensity of the microspheres (radius 500 μm, refractive index 1.77) on an optical fiber half coupler is analyzed at 1510 nm. The 0.43 nm angular mode spacing of the resonances is comparable to the angular mode spacing value estimated using the optical size of the microsphere. The spectral linewidths of the resonances are in the order of 0.01 nm, which corresponds to quality factors of approximately 105. A polydopamine layer is used as a functionalizing agent on sapphire microspherical resonators in view of biosensor implementation. The varying layer thickness on the microsphere is determined as a function of the resonance wavelength shift. It is shown that polymer functionalization has a minor effect on the quality factor. This is a promising step toward the development of an optical biosensor.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.sna.2014.11.024
SN  - 1873-3069 (E-Journal); 0924-4247 (Print)
VL  - 222
SP  - 212
EP  - 219
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
T1  - Physical response of hyperelastic models for composite materials and soft tissues
JF  - Asia pacific journal on computational engineering
Y1  - 2015
U6  - http://dx.doi.org/10.1186/s40540-015-0015-x
SN  - 2196-1166
VL  - 2
IS  - 3 (December 2015)
SP  - 1
EP  - 18
ER  -