TY  - CHAP
A1  - Eggert, Mathias
A1  - Dyong, Julian
T1  - Applying process mining in small and medium sized IT enterprises – challenges and guidelines
T2  - International Conference on Business Process Management (BPM 2022)
N2  - Process mining gets more and more attention even outside large enterprises and can be a major benefit for small and medium sized enterprises (SMEs) to gain competitive advantages. Applying process mining is challenging, particularly for SMEs because they have less resources and process maturity. So far, IS researchers analyzed process mining challenges with a focus on larger companies. This paper investigates the application of process mining by means of a case study and sheds light into the particular challenges of an IT SME. The results reveal 13 SME process mining challenges and seven guidelines to address them. In this way, the paper contributes to the understanding of process mining application in SME and shows similarities and differences to larger companies.
KW  - Process mining
KW  - Challenges
KW  - Guidelines
KW  - SME
KW  - Case Study
Y1  - 2022
SN  - 978-3-031-16103-2
U6  - http://dx.doi.org/10.1007/978-3-031-16103-2_11
SP  - 125
EP  - 142
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Stieglitz, Kristian
A1  - Wollert, Jörg
T1  - Approach of using ultra-wideband-radio in industrial real-time ethernet networks
T2  - The 4th International Multi-Conference on Engineering and Technological Innovation : IMETI : July 19th - July 22nd, 2011, Orlando, Florida, USA
Y1  - 2011
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Pawelke, Siegfried
ED  - Ciesielski, Zbigniew
T1  - Approximationstheorie mit Hilfe von Jacobi-Polynomen und Kugelfunktionen
T2  - Proceedings of the conference jointly organized by the Mathematical Institute of the Polish Academy of Sciences and the Institute of Mathematics of the Adam Mickiewicz University, held in Poznan, 22-26 August, 1972
Y1  - 1975
SN  - 90-277-0483-X
SP  - 157
EP  - 173
PB  - Reichel
CY  - Dordrecht
ER  - 
TY  - CHAP
A1  - Matcha, Heike
A1  - Karzel, Rüdiger
A1  - Quasten, Gero
T1  - Architectural Design with Parametric Modeling & Customized Mass Production: Explorations and Case Studies in Architectural Design and Production Methods
T2  - Language and the Scientific Imagination. The 11th International Conference of ISSEI, Language Centre, University of Helsinki (Finland) 28 July - 2 August 2008
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Damm, Sebastian
A1  - Rahier, Michael
A1  - Ritz, Thomas
A1  - Schäfer, Thomas
ED  - Davoli, Renzo
T1  - Architecture for platform- and hardware-independent mesh networks : how to unify the channels
T2  - ICSNC 2013 : The Eighth International Conference on Systems and Networks Communications ; October 27, 2013 to October 31, 2013, Venice Italy
N2  - This paper will prove that mesh networks among different platforms and hardware channels can help to channel valuable information even if public telecommunication infrastructure is not available due to arbitrary reasons. Therefore, results of a simulation for mesh networks on mass events will be provided, followed by the developed architecture and an outlook on future research. The developed architecture is currently being implemented and field tested on mass events.
Y1  - 2013
SN  - 978-1-61208-305-6
N1  - IARIA Conference
SP  - 131
EP  - 134
PB  - Curran Associates
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Chavez Bermudez, Victor Francisco
A1  - Wollert, Jörg
T1  - Arduino based Framework for Rapid Application Development of a Generic IO-Link interface
T2  - Kommunikation und Bildverarbeitung in der Automation
N2  - The implementation of IO-Link in the automation industry has increased over the years. Its main advantage is it offers a digital point-to-point plugand-play interface for any type of device or application. This simplifies the communication between devices and increases productivity with its different features like self-parametrization and maintenance. However, its complete potential is not always used.

The aim of this paper is to create an Arduino based framework for the development of generic IO-Link devices and increase its implementation for rapid prototyping. By generating the IO device description file (IODD) from a graphical user interface, and further customizable options for the device application, the end-user can intuitively develop generic IO-Link devices. The peculiarity of this framework relies on its simplicity and abstraction which allows to implement any sensor functionality and virtually connect any type of device to an IO-Link master. This work consists of the general overview of the framework, the technical background of its development and a proof of concept which demonstrates the workflow for its implementation.
Y1  - 2020
SN  - 978-3-662-59895-5
SN  - 978-3-662-59894-8
U6  - http://dx.doi.org/10.1007/978-3-662-59895-5_2
N1  - Teil der Buchserie "Technologien für die intelligente Automation" (TIA,volume 12)
SP  - 21
EP  - 33
PB  - Springer Vieweg
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Thurn, Laura
A1  - Gebhardt, Andreas
T1  - Arousing Enthusiasm for STEM: Teaching 3D Printing Technology
T2  - Conference Proceedings: New Perspectives in Science Education
Y1  - 2017
SN  - 978-88-6292-847-2
SP  - 87
EP  - 92
PB  - liberiauniversitaria.it
CY  - Padua
ER  - 
TY  - CHAP
A1  - Stöbe, Rolf
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
A1  - Breuer, Michael
T1  - Artificial ageing of mobile devices using a simulated GSM/GPRS network
T2  - Eighth International Conference on Availability, Reliability and Security (ARES) : 2-6 Sept. 2013, Regensburg
Y1  - 2013
SP  - 493
EP  - 497
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Schänzle, Christian
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
T1  - As good as it can be: Ventilation system design by a combined scaling and discrete optimization method
T2  - Proceedings of FAN 2015
N2  - The understanding that optimized components do not automatically lead to energy-efficient systems sets the attention from the single component on the entire technical system. At TU Darmstadt, a new field of research named Technical Operations Research (TOR) has its origin. It combines mathematical and technical know-how for the optimal design of technical systems. We illustrate our optimization approach in a case study for the design of a ventilation system with the ambition to minimize the energy consumption for a temporal distribution of diverse load demands. By combining scaling laws with our optimization methods we find the optimal combination of fans and show the advantage of the use of multiple fans.
Y1  - 2015
N1  - Proceedings of FAN 2015, Lyon (France), 15 – 17 April 2015
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Niemüller, Tim
A1  - Lakemeyer, Gerhard
A1  - Ferrein, Alexander
T1  - Aspects of integrating diverse software into robotic systems extended abstract
T2  - ICRA 2013 - 8th Workshop on Software Development and Integration in Robotics (SDIR), Karlsruhe, Germany
Y1  - 2013
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Lorenz, Imke-Sophie
A1  - Altherr, Lena
A1  - Pelz, Peter F.
ED  - Neufeld, Janis S.
ED  - Buscher, Udo
ED  - Lasch, Rainer
ED  - Möst, Dominik
ED  - Schönberger, Jörn
T1  - Assessing and Optimizing the Resilience of Water Distribution Systems Using Graph-Theoretical Metrics
T2  - Operations Research Proceedings 2019
N2  - Water distribution systems are an essential supply infrastructure for cities. Given that climatic and demographic influences will pose further challenges for these infrastructures in the future, the resilience of water supply systems, i.e. their ability to withstand and recover from disruptions, has recently become a subject of research. To assess the resilience of a WDS, different graph-theoretical approaches exist. Next to general metrics characterizing the network topology, also hydraulic and technical restrictions have to be taken into account. In this work, the resilience of an exemplary water distribution network of a major German city is assessed, and a Mixed-Integer Program is presented which allows to assess the impact of capacity adaptations on its resilience.
KW  - OR 2019
KW  - business analytics
KW  - decision analytics
KW  - digital economy
KW  - mathematical optimization
Y1  - 2020
SN  - 978-3-030-48439-2
SN  - 978-3-030-48438-5
U6  - http://dx.doi.org/10.1007/978-3-030-48439-2_63
N1  - Annual International Conference of the German Operations Research Society (GOR), Dresden, Germany, September 4-6, 2019
SP  - 521
EP  - 527
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
A1  - Haunert, Martina
T1  - Assessing the effectiveness of price cap regimes for the regulation of fixed telephony markets: has it been successful in achieving competition? : preliminary draft / by Markus Fredebeul-Krein and Martina Haunert. 19th European Regional ITS Conference of the International Telecommunications Society, September 17–19, 2008 Rome, Italy
N2  - 1. Introduction 2. Tariff regulation, rebalancing and price caps 3. Price cap regimes in selected European countries 4. Has price cap regulation been successful? 5. Regulatory implications for other countries
KW  - Telekommunikationsmarkt
KW  - Telekommunikationsmarkt
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Bitz, Andreas
A1  - Kraff, O.
A1  - Orzada, S.
A1  - Maderwald, S.
A1  - Brote, I.
A1  - Johst, S.
A1  - Ladd, E.
T1  - Assessment of RF Safety of Transmit Coils at 7 Tesla by Experimental and Numerical Procedures (490.)
T2  - 19th annual ISMRM scientific meeting and exhibition 2011 : Montreal, Quebec, Canada, 7 - 13 May 2011
Y1  - 2012
SN  - 978-1-61839-284-8
IS  - Volume 1
SP  - 475
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Zischank, Wolfgang J.
A1  - Kern, Alexander
A1  - Frentzel, Ralf
A1  - Heidler, Fridolin
A1  - Seevers, M.
T1  - Assessment of the lightning transient coupling to control cables interconnecting structures in large industrial facilities and power plants
N2  - Large industrial facilities and power plants often require a huge number fo information and control cables between the differnet structures. These I&C-cables can be routed in reinforced concrete cable ducts or in isolated buried cable runs. KTA 2206 is the German lightning protection standard for nuclear power plants. During the last several years considerable effort has been made to revise this standard. Despite the well established principles and design guidelines for the construction of the lightning protection system, this standard puts special emphasis on the coupling of transient overvoltages to I&C-cables.
KW  - Blitzschutz
KW  - Elektromagnetische Kopplung
KW  - Überspannung
KW  - Kraftwerke
KW  - Industrieanlagen
KW  - Lightning
KW  - current distribution
KW  - electromagnetic coupling
KW  - overvoltages
Y1  - 2000
ER  - 
TY  - CHAP
A1  - Pietsch, Wolfram
A1  - Herzwurm, Georg
A1  - Zander, Dietmar
T1  - Assuring quality of QFD-education in Germany
T2  - ISQFD'06: 12th International Symposium on QFD : Tokyo, 07.-09.2006
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Tepecik, Atakan
ED  - Digel, Ilya
ED  - Staat, Manfred
ED  - Trzewik, Jürgen
ED  - Sielemann, Stefanie
ED  - Erni, Daniel
ED  - Zylka, Waldemar
T1  - AstroBioLab: Review of technical and bioanalytical approaches
T2  - 4th YRA MedTech Symposium 2024 : February 1 / 2024 / FH Aachen
N2  - This study presents the concept of AstroBioLab, an autonomous astrobiological field laboratory tailored for the exploration of (sub)glacial habitats. AstroBioLab is an integral component of the TRIPLE (Technologies for Rapid Ice Penetration and subglacial Lake Exploration) DLR-funded project, aimed at advancing astrobiology research through the development and deployment of innovative technologies. AstroBioLab integrates diverse measurement techniques such as fluorescence microscopy, DNA sequencing and fluorescence spectrometry, while leveraging microfluidics for efficient sample delivery and preparation.
Y1  - 2024
SN  - 978-3-940402-65-3
U6  - http://dx.doi.org/10.17185/duepublico/81475
SP  - 33
EP  - 34
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Pirovano, Laura
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Attitude and Orbital Dynamics Modeling for an Uncontrolled Solar-Sail Experiment in Low-Earth Orbit
T2  - 25th International Symposium on Spaceflight Dynamics, 2015, Munich, Germany
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Pirovano, Laura
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Attitude and orbital modeling of an uncontrolled solar-sail experiment in low-Earth orbit
T2  - 25th International Symposium on Space Flight Dynamics ISSFD
N2  - Gossamer-1 is the first project of the three-step Gossamer roadmap, the purpose of which is to develop, prove and demonstrate that solar-sail technology is a safe and reliable propulsion technique for long-lasting and high-energy missions. This paper firstly presents the structural analysis performed on the sail to understand its elastic behavior. The results are then used in attitude and orbital simulations. The model considers the main forces and torques that a satellite experiences in low-Earth orbit coupled with the sail deformation. Doing the simulations for varying initial conditions in attitude and rotation rate, the results show initial states to avoid and maximum rotation rates reached for correct and faulty deployment of the sail. Lastly comparisons with the classic flat sail model are carried out to test the hypothesis that the elastic behavior does play a role in the attitude and orbital behavior of the sail
KW  - Solar sail
KW  - Gossamer structures
KW  - Attitude dynamics
KW  - Orbital dynamics
Y1  - 2015
N1  - 25th International Symposium on Space Flight Dynamics ISSFD
October 19 – 23, 2015, Munich, Germany
https://issfd.org/2015/
SP  - 1
EP  - 15
ER  - 
TY  - CHAP
A1  - Fabo, Sabine
T1  - Audio-visual hybrids : between immersion and detachment
N2  - Close interrelations between sound and image are not a mere phenomenon of today’s multimedia technology. The idea of the synthesis of different media lies at the core of the concept of the Gesamtkunstwerk in the second half of the 19th century and it can also be traced back to the synaesthesia debate at the beginning of the 20th century [...].
KW  - Elektronische Kunst
KW  - Klangkunst
KW  - Hybride Kunst
KW  - Medienkunst
KW  - Hybrid Art
KW  - Sound Art
KW  - Audio-visual Art
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Dören, Horst-Peter
A1  - Wernicke, K.
T1  - Auftragen von verschleißfesten stranggegossenen Hartlegierungen auf Kobaltbasis durch das WIG- und Gasschweißen
T2  - Schweißen und Schneiden '83 = Welding and Cutting '83. Vorträge der Großen Schweißtechnischen Tagung in Aachen vom 28. bis 30. September 1983. Veranst.: Deutscher Verband für Schweißtechnik (DVS). DVS-Berichte. 83
Y1  - 1983
SN  - 3-87155-388-3
SP  - 109
EP  - 113
PB  - Dt. Verl. für Schweißtechnik
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Razen, Manfred
A1  - Späte, Frank
A1  - Meliß, Michael
A1  - Breuer, Maria
A1  - Hubrich, Jörg
A1  - Rischert, Christa
T1  - Aus-, Fort- und Weiterbildung am Solar-Institut Jülich
T2  - Deutschlands Weg in eine solare Zukunft : Tagungsband; 26. - 30. Juni 1998 Fachhochschule Köln / 11. Internationales Sonnenforum
Y1  - 1998
SP  - 1071
EP  - 1078
PB  - Solar Promotion
CY  - München
ER  - 
TY  - CHAP
A1  - Kubalski, T.
A1  - Butenweg, Christoph
T1  - Ausfachungsmauerwerk unter kombinierter seismischer Beanspruchung
T2  - Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Zürich. (Dokumentation / SIA ; D 0255)
Y1  - 2015
SN  - 978-3-03732-060-0
SP  - 117
EP  - 122
PB  - SGEB
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Pflug, J.
A1  - Wahle, Michael
ED  - Bürger, Gudrun
T1  - Auslegung der CFK-Sandwich-Rumpfstruktur eines Hubschraubers mit der Methode der Finiten Elemente
T2  - Basistechnologien für neue Herausforderungen in der Luft- und Raumfahrt : DGLR-Jahrestagung / Deutscher Luft- und Raumfahrt-Kongress 1994, Erlangen, 04.- 07. Oktober 1994. - (Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt ; 1994,3)
Y1  - 1994
SP  - 1135
EP  - 1144
PB  - DGLR
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Dümmler, Andreas
A1  - Oetringer, Kerstin
A1  - Göttsche, Joachim
T1  - Auslegungstool zur energieeffizienten Kühlung von Gebäuden
T2  - DKV-Tagung 2020, AA IV
Y1  - 2020
N1  - Deutsche Kälte- und Klimatagung 2020 online
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Veettil, Yadu Krishna Morassery
A1  - Rakshit, Shantam
A1  - Schopen, Oliver
A1  - Kemper, Hans
A1  - Esch, Thomas
A1  - Shabani, Bahman
ED  - Bin Abdollah, Mohd Fadzli
ED  - Amiruddin, Hilmi
ED  - Singh, Amrik Singh Phuman
ED  - Munir, Fudhail Abdul
ED  - Ibrahim, Asriana
T1  - Automated Control System Strategies to Ensure Safety of PEM Fuel Cells Using Kalman Filters
T2  - Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia
N2  - Having well-defined control strategies for fuel cells, that can efficiently detect errors and take corrective action is critically important for safety in all applications, and especially so in aviation. The algorithms not only ensure operator safety by monitoring the fuel cell and connected components, but also contribute to extending the health of the fuel cell, its durability and safe operation over its lifetime. While sensors are used to provide peripheral data surrounding the fuel cell, the internal states of the fuel cell cannot be directly measured. To overcome this restriction, Kalman Filter has been implemented as an internal state observer.
Other safety conditions are evaluated using real-time data from every connected sensor and corrective actions automatically take place to ensure safety. The algorithms discussed in this paper have been validated thorough Model-in-the-Loop (MiL) tests as well as practical validation at a dedicated test bench.
KW  - control system
KW  - PEM fuel cells
KW  - Kalman filter
Y1  - 2022
SN  - 978-981-19-3178-9
SN  - 978-981-19-3179-6 (E-Book)
U6  - http://dx.doi.org/10.1007/978-981-19-3179-6_55
SN  - 2195-4356
N1  - The 7th International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2021) was organized by Universiti Teknikal Malaysia Melaka (UTeM), Malaysia, in association with the Universitas Sebelas Maret (UNS), Indonesia, on 23 November 2021
SP  - 296
EP  - 299
PB  - Springer Nature
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Ayed, Anis Haj
A1  - Striegan, Constantin J. D.
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Kazari, M.
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
T1  - Automated design space exploration of the hydrogen fueled "Micromix" combustor technology
N2  - Combined with the use of renewable energy sources for
its production, Hydrogen represents a possible alternative gas
turbine fuel for future low emission power generation. Due to
its different physical properties compared to other fuels such
as natural gas, well established gas turbine combustion
systems cannot be directly applied for Dry Low NOx (DLN)
Hydrogen combustion. This makes the development of new
combustion technologies an essential and challenging task
for the future of hydrogen fueled gas turbines.
The newly developed and successfully tested “DLN
Micromix” combustion technology offers a great potential to
burn hydrogen in gas turbines at very low NOx emissions.
Aiming to further develop an existing burner design in terms
of increased energy density, a redesign is required in order to
stabilise the flames at higher mass flows and to maintain low
emission levels.
For this purpose, a systematic design exploration has
been carried out with the support of CFD and optimisation
tools to identify the interactions of geometrical and design
parameters on the combustor performance. Aerodynamic
effects as well as flame and emission formation are observed
and understood time- and cost-efficiently. Correlations
between single geometric values, the pressure drop of the
burner and NOx production have been identified as a result.
This numeric methodology helps to reduce the effort of
manufacturing and testing to few designs for single
validation campaigns, in order to confirm the flame stability
and NOx emissions in a wider operating condition field.
Y1  - 2017
N1  - Proceedings of the 1st Global Power and Propulsion Forum
GPPF 2017, Jan 16-18, 2017, Zurich, Switzerland
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Sildatke, Michael
A1  - Karwanni, Hendrik
A1  - Kraft, Bodo
A1  - Schmidts, Oliver
A1  - Zündorf, Albert
T1  - Automated Software Quality Monitoring in Research Collaboration Projects
T2  - ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops
Y1  - 2020
U6  - http://dx.doi.org/10.1145/3387940.3391478
SP  - 603
EP  - 610
ER  - 
TY  - CHAP
A1  - Blaneck, Patrick Gustav
A1  - Bornheim, Tobias
A1  - Grieger, Niklas
A1  - Bialonski, Stephan
T1  - Automatic readability assessment of german sentences with transformer ensembles
T2  - Proceedings of the GermEval 2022 Workshop on Text Complexity Assessment of German Text
N2  - Reliable methods for automatic readability assessment have the potential to impact a variety of fields, ranging from machine translation to self-informed learning. Recently, large language models for the German language (such as GBERT and GPT-2-Wechsel) have become available, allowing to develop Deep Learning based approaches that promise to further improve automatic readability assessment. In this contribution, we studied the ability of ensembles of fine-tuned GBERT and GPT-2-Wechsel models to reliably predict the readability of German sentences. We combined these models with linguistic features and investigated the dependence of prediction performance on ensemble size and composition. Mixed ensembles of GBERT and GPT-2-Wechsel performed better than ensembles of the same size consisting of only GBERT or GPT-2-Wechsel models. Our models were evaluated in the GermEval 2022 Shared Task on Text Complexity Assessment on data of German sentences. On out-of-sample data, our best ensemble achieved a root mean squared error of 0:435.
Y1  - 2022
U6  - http://dx.doi.org/10.48550/arXiv.2209.04299
N1  - Proceedings of the 18th Conference on Natural Language
Processing/Konferenz zur Verarbeitung natürlicher
Sprache (KONVENS 2022)
12-15 September, 2022
University of Potsdam
Potsdam, Germany
SP  - 57
EP  - 62
PB  - Association for Computational Linguistics
CY  - Potsdam
ER  - 
TY  - CHAP
A1  - Buda, Aurel
A1  - Schürmann, Volker
A1  - Wollert, Jörg
T1  - Automatische Generierung von Automatisierungsobjekten nach IEC 61131-3 zur einfachen Integration von Funkkomponenten in übergeordnete Steuerungssysteme
T2  - Wireless automation : funkgestützte Kommunikation in der industriellen Automatisierungstechnik ; Tagung Berlin, 28. und 29. Februar 2008. (VDI-Berichte ; 2010)
Y1  - 2008
SN  - 978-3-18-092010-8  ; 3-18-092010-8
SP  - 75
EP  - 84
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Engemann, Heiko
A1  - Wiesen, Patrick
A1  - Kallweit, Stephan
A1  - Deshpande, Harshavardhan
A1  - Schleupen, Josef
T1  - Autonomous mobile manipulation using ROS
T2  - Advances in Service and Industrial Robotics
Y1  - 2018
SN  - 978-3-319-61276-8
U6  - http://dx.doi.org/10.1007/978-3-319-61276-8_43
N1  - International Conference on Robotics in Alpe-Adria Danube Region RAAD 2017;
Mechanisms and Machince Science book series, Vol 49.
SP  - 389
EP  - 401
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC a system for future broadband aeronautical multi-carrier communications in the L-BAND
T2  - IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas
Y1  - 2007
SN  - 978-1-4244-1108-5
SP  - 4D2-1
EP  - 4D2-13
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC – Aeronautical Broadband Communication in the L-Band
T2  - First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2006 ; Bd. 3)
Y1  - 2007
SN  - 0070-4083
SP  - 487
EP  - 496
PB  - Deutschen Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
T1  - B-AMC — broadband aeronautical multi-carrier communications
T2  - Integrated Communications, Navigation and Surveillance Conference : [ICNS 2008] ; Bethesda, Md., 5 - 7 May 2008
Y1  - 2008
SN  - 978-1-4244-2303-3 ; 978-1-4244-2304-0
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Gligorevic, Snjezana
A1  - Brandes, Sinja
A1  - Cosovic, I.
A1  - Schnell, Michael
T1  - B-VHF, ein 'Overlay'-System für die ATC Kommunikation im VHF Band
T2  - Motto: Luft- und Raumfahrt - Grenzen überwinden, Horizonte erweitern : Deutscher Luft- und Raumfahrtkongress 2005, Friedrichshafen, 26. bis 29. September 2005
Y1  - 2005
SP  - 951
EP  - 958
PB  - DGLR
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Bitz, Andreas
A1  - Alaydrus, M.
A1  - Streckert, J.
A1  - Hansen, V.W.
T1  - Base station antennas embedded in complex environments: rf exposure in controlled areas
T2  - 23rd BEMS Annual Meeting, St. Paul, Minnesota, USA, 49-50, June 2001
Y1  - 2001
SP  - 49
EP  - 50
PB  - Bioelectromagnetics Society
CY  - Frederick, MD
ER  - 
TY  - CHAP
A1  - Frantz, Cathy
A1  - Binder, Matthias
A1  - Busch, Konrad
A1  - Ebert, Miriam
A1  - Heinrich, Andreas
A1  - Kaczmarkiewicz, Nadine
A1  - Schlögl-Knothe, Bärbel
A1  - Kunze, Tobias
A1  - Schuhbauer, Christian
A1  - Stetka, Markus
A1  - Schwager, Christian
A1  - Spiegel, Michael
A1  - Teixeira Boura, Cristiano José
A1  - Bauer, Thomas
A1  - Bonk, Alexander
A1  - Eisen, Stefan
A1  - Funck, Bernhard
T1  - Basic Engineering of a High Performance Molten Salt Tower Receiver System
T2  - Solar Paces 2020
Y1  - 2020
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Abbas, Karim
A1  - Thurn, Laura
A1  - Kessler, Julia
A1  - Eichler, Fabian
T1  - Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901009
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01009
ER  - 
TY  - CHAP
A1  - Kessler, Julia
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Abbas, Karim
T1  - Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings
T2  - The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16
Y1  - 2017
U6  - http://dx.doi.org/10.1051/matecconf/20179403008
N1  - MATEC Web Conf. Vol 94, 2017, 03008
MATEC Web of Conferences 94, 03008 (2017)
ET  - Vol. 94
ER  - 
TY  - CHAP
A1  - Kessler, Julia
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
T1  - Basic research on lattice structures focused on the strut shape and welding beads
T2  - Physics Procedia
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.phpro.2016.08.086
SN  - 1875-3884
N1  - Laser Assisted Net Shape Engineering 
9th International Conference on Photonic Technologies Proceedings of the LANE 2016
VL  - Vol. 83
SP  - 833
EP  - 838
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Baudynamische Untersuchung von Brückenbauwerken im Kölner Raum
T2  - Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941)
Y1  - 2006
SN  - 3-18-091941-8
SP  - 121
EP  - 140
PB  - VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Plenz, Michael
T1  - Baurevision und Unternehmensberatung, Tätigkeit als öffentlich bestellter und vereidigter Sachverständiger
N2  - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 19-20. Zusammenfassung des Vortrags: Prozessanalyse und Revision beim Umbau des Flughafens Hamburg, Beratung von Bauunternehmen, Sachverständigentätigkeit
KW  - Öffentlich bestellter Sachverständiger
KW  - Baurevision
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Karvanek, Eva
A1  - Butenweg, Christoph
A1  - Ebenau, Carsten
T1  - Bautechnische Prüfung und Bauüberwachung der Arena „Auf Schalke“
T2  - Berichte der Fachtagung Baustatik - Baupraxis 8 am 21. und 22. März 2002 in Braunschweig / Hrsg. Dieter Dinkler
Y1  - 2002
SN  - 3-926031-95-6
SP  - 237
EP  - 245
PB  - TU Braunschweig, Institut für Statik
CY  - Braunschweig
ER  - 
TY  - CHAP
A1  - Peeken, Heinz
A1  - Benner, Joachim
T1  - Beeinträchtigung des Druckaufbaus in Gleitlagern durch Schmierstoffverschäumung
T2  - Gleit- und Wälzlagerungen : Gestaltung, Berechnung, Einsatz; Tagung Neu-Ulm, 14. und 15. März 1985 / VDI-Ges. Entwicklung, Konstruktion, Vertrieb. - (VDI-Berichte ; 549)
Y1  - 1985
SN  - 3-18-090549-2
SN  - 0083-5560
SP  - 373
EP  - 397
ER  - 
TY  - CHAP
A1  - Morandi, Paolo
A1  - Butenweg, Christoph
A1  - Breis, Khaled
A1  - Beyer, Katrin
A1  - Magenes, Guido
ED  - Arion, Christian
ED  - Scupin, Alexandra
ED  - Ţigănescu, Alexandru
T1  - Behaviour factor q for the seismic design of URM buildings
T2  - The Third European Conference on Earthquake Engineering and Seismology September 4 – September 9, 2022, Bucharest
N2  - Recent earthquakes showed that low-rise URM buildings following codecompliant seismic design and details behaved in general very well without substantial damages. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. Values of q-factors are derived for low-rise URM buildings with rigid diaphragms, with reference to modern structural configurations realized in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0 to 3.0 are proposed.
KW  - unreinforced masonry buildings
KW  - modern constructions
KW  - seismic design
KW  - linear elastic analysis;
KW  - behaviour factor q
Y1  - 2022
SN  - 978-973-100-533-1
SP  - 1184
EP  - 1194
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Thierauf, Georg
T1  - Bemessung und Kostenoptimierung von Stahlbetontragwerken
T2  - Berichte der 7. Fachtagung "Baustatik - Baupraxis" : Aachen, Deutschland, 18. - 19. März 1999 / Hrsg.: Konstantin Meskouris. (Baustatik Baupraxis ; 7)
Y1  - 1999
SN  - 90-5809-044-2
SP  - 213
EP  - 220
PB  - Balkema
CY  - Rotterdam
ER  - 
TY  - CHAP
A1  - Damm, Sebastian
A1  - Ritz, Thomas
A1  - Strauch, Jakob
ED  - Klink, Stefan
T1  - Benutzerzentrierte Anforderungsanalyse für die Produktlinien-Entwicklung mobiler Unternehmenssoftware
T2  - EMISA 2010 : Einflussfaktoren auf die Entwicklung flexibler, integrierter Informationssysteme ; Beiträge des Workshops der GI-Fachgruppe Entwicklungsmethoden für Informationssysteme und deren Anwendung (EMISA), 07. - 08.10.2010 in Karlsruhe, Germany. - (GI-Edition : Proceedings ; 172)
Y1  - 2010
SN  - 978-3-88579-266-6
SP  - 117
EP  - 130
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Michel, Philipp
A1  - Alder, Philipp
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Berechnung der Fluid-Struktur-Interaktion für flexibel gelagerte Flüssigkeitstanks
T2  - 16. D-A-CH Tagung Erdbebeningenieurwesen & Baudynamik: 26. und 27. September 2019, Universität Innsbruck
Y1  - 2019
SN  - 978-3-200-06454-6
ER  - 
TY  - CHAP
A1  - Wahle, Michael
A1  - Zeleny, R.
T1  - Berechnung von Elastomer-Bauteilen bei quasistatischer Belastung unter Berücksichtigung von Eigenkontakt und äußeren Reibungseinflüssen
T2  - 13. CAD-FEM Users' Meeting : FEM-Technologietage, 25. - 27. Oktober 1995 in Bad Wildungen bei Kassel / [Hrsg.: CAD-FEM GmbH]
Y1  - 1995
N1  - CAD-FEM Users' Meeting <13, 1995, Wildungen> ; CADFEM GmbH <Grafing>
SP  - 5
EP  - 6
CY  - Grafing b. München [u.a.]
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Berechnungsansatz für basisisolierte Tankbauwerke
T2  - Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universität München / Hrsg. Kai-Uwe Bletzinger ...
Y1  - 2014
SN  - 978-3-00-041256-1
SP  - 103
EP  - 112
PB  - Lehrstuhl für Statik, Techn. Univ. München
CY  - München
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
T1  - Beurteilung der Spaltgefahr beim Eindrehen von selbstbohrenden Holzschrauben
T2  - Forum Holz/Bau Garmisch 09 : Internationales Holzbauforum (IHF) ; Congress Centrum, Garmisch-Partenkirchen, 2. - 4. Dezember 2009 ; aus der Praxis - für die Praxis, Wirtschaft, Markt, Ökologie, Energieeffizienz, Architektur, Tragwerke, Realisierungen
Y1  - 2009
SN  - 978-3-8167-8187-5
N1  - Internationales Holzbauforum ; (15 ; 2009.12.02-04 ; Garmisch-Partenkirchen)
PB  - Fraunhofer IRB
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Huck, Christina
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Bifunktionaler Sensorchip für den Nachweis von Gelöstwasserstoff
Y1  - 2011
SN  - 978-3942710-53-4
U6  - http://dx.doi.org/10.5162/10dss2011/16.10
SP  - 325
EP  - 328
ER  - 
TY  - CHAP
A1  - Tippkötter, Nils
A1  - Schünemann, V.
A1  - Christmann, R.
A1  - Pasteur, A.
A1  - Schweizer, J.
A1  - Ulber, R.
ED  - Beckmann, Dieter
T1  - Bioaffinity Layering magnetisierbarer Mikro- und Nanopartikel
T2  - Technische Systeme für die Lebenswissenschaften : 14. Heiligenstädter Kolloquium, Heilbad Heiligenstadt, 22.09. - 24.09.2008
Y1  - 2008
SN  - 978-3-00-025695-0
SP  - 97
EP  - 98
CY  - Heiligenstadt
ER  - 
TY  - CHAP
A1  - Stollenwerk, Dominik
A1  - Rieke, C.
A1  - Dahmen, Markus
A1  - Pieper, Martin
T1  - Biogas Production Modelling : A Control System Engineering Approach
T2  - IOP Conference Series: Earth and Environmental Science. Bd. 32
Y1  - 2016
U6  - http://dx.doi.org/10.1088/1755-1315/32/1/012008
SN  - 1755-1315
N1  - ICARET 2016, International Conference on Advances in Renewable Energy and Technologies, Putrajaya, MY, Feb 23-25, 2016
SP  - 012008/1
EP  - 012008/4
ER  - 
TY  - CHAP
A1  - Kasper, Katharina
A1  - Schiffels, Johannes
A1  - Krafft, Simone
A1  - Kuperjans, Isabel
A1  - Elbers, Gereon
A1  - Selmer, Thorsten
T1  - Biogas Production on Demand Regulated by Butyric Acid Addition
T2  - IOP Conference Series: Earth and Environmental Science. Bd. 32
Y1  - 2016
U6  - http://dx.doi.org/10.1088/1755-1315/32/1/012009
SN  - 1755-1315
N1  - ICARET 2016, International Conference on Advances in Renewable Energy and Technologies, Putrajaya, MY, Feb 23-25, 2016
VL  - 32
SP  - 012009/1
EP  - 012009/4
ER  - 
TY  - CHAP
A1  - Meliß, Michael
T1  - Biomasse-Potential
T2  - Energie aus Biomasse : Erfahrungen mit verschiedenen technischen Lösungen und Zukunftsaussichten; Tagungsbericht; [Fachtagung, 18. - 19. November 1985, Freising]
Y1  - 1985
SP  - 1
EP  - 30
PB  - Techn. Univ.
CY  - München
ER  - 
TY  - CHAP
A1  - Kahmann, Stephanie Lucina
A1  - Uschok, Stephan
A1  - Wegmann, Kilian
A1  - Müller, Lars-P.
A1  - Staat, Manfred
T1  - Biomechanical multibody model with refined kinematics of the elbow
T2  - 6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK
N2  - The overall objective of this study is to develop a new external fixator, which closely maps the native kinematics of the elbow to decrease the joint force resulting in reduced rehabilitation time and pain. An experimental setup was designed to determine the native kinematics of the elbow during flexion of cadaveric arms. As a preliminary study, data from literature was used to modify a published biomechanical model for the calculation of the joint and muscle forces. They were compared to the original model and the effect of the kinematic refinement was evaluated. Furthermore, the obtained muscle forces were determined in order to apply them in the experimental setup. The joint forces in the modified model differed slightly from the forces in the original model. The muscle force curves changed particularly for small flexion angles but their magnitude for larger angles was consistent.
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Jabbari, Medisa
A1  - Bhattarai, Aroj
A1  - Anding, Ralf
A1  - Staat, Manfred
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Biomechanical simulation of different prosthetic meshes for repairing uterine/vaginal vault prolapse
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 118
EP  - 119
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - Biomechanical study of the female pelvic floor dysfunction using the finite element method
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Artmann, Gerhard
A1  - Digel, Ilya
A1  - Linder, Peter
A1  - Temiz Artmann, Aysegül
T1  - Biophysical and Engineering Contributions to Plant Research
N2  - Tests with palm tree leaves have just started yet and scan data are in the process to be analyzed. The final goal of future project for palm tree gender and species recognition will be to develop optical scanning technology to be applied to date palm tree leaves for in–situ screening purposes. Depending on the software used and the particular requirements of the users the technology potentially shall be able to identify palm tree diseases, palm tree gender, and species of young date palm trees by scanning leaves.
KW  - Pflanzenphysiologie
KW  - Dattel
KW  - Pflanzenscanner
KW  - plant scanner
KW  - date palm tree
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Schusser, Sebastian
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - Biopolymer-degradation monitoring by chip-­based impedance spectroscopy technique
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 47
EP  - 47
ER  - 
TY  - CHAP
A1  - Lei, Yu
A1  - Mulchandani, Priti
A1  - Chen, Wilfred
A1  - Mulchandani, Ashok
T1  - Biosensor for direct determination of fenitrothion and EPN using recombinant Pseudomonas putida JS444 with surface expressed organophosphorus hydrolase. 1. modified clark oxygen electrode
N2  - This paper reports a first microbial biosensor for rapid and cost-effective determination of organophosphorus pesticides fenitrothion and EPN. The biosensor consisted of recombinant PNP-degrading/oxidizing bacteria Pseudomonas putida JS444 anchoring and displaying organophosphorus hydrolase (OPH) on its cell surface as biological sensing element and a dissolved oxygen electrode as the transducer. Surfaceexpressed OPH catalyzed the hydrolysis of fenitrothion and EPN to release 3-methyl-4-nitrophenol and p-nitrophenol, respectively, which were oxidized by the enzymatic machinery of Pseudomonas putida JS444 to carbon dioxide while consuming oxygen, which was measured and correlated to the concentration of organophosphates. Under the optimum operating conditions, the biosensor was able to measure as low as 277 ppb of fenitrothion and 1.6 ppm of EPN without interference from phenolic compounds and other commonly used pesticides such as carbamate pesticides, triazine herbicides and organophosphate pesticides without nitrophenyl substituent. The applicability of the biosensor to lake water was also demonstrated.
KW  - Biosensor
KW  - Organophosphorus
KW  - fenitrothion
KW  - EPN
KW  - biosensor
KW  - Pseudomonas putida
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1573
ER  - 
TY  - CHAP
A1  - Tippkötter, Nils
T1  - Biotechnologische Gewinnung von Wertstoffen aus Molke : BiobasedWorld - Innovation in food
T2  - Biotechnica 2013 : European biotechnology science & industry news
Y1  - 2013
VL  - 12
IS  - 9, special
SP  - 33
EP  - 50
ER  - 
TY  - CHAP
A1  - Fuchs, Britta
A1  - Ritz, Thomas
ED  - Bick, Markus
T1  - Blended Shopping
T2  - Mobile und ubiquitäre Informationssysteme - Entwicklung, Implementierung und Anwendung : Proceedings zur 4. Konferenz Mobile und Ubiquitäre Informationssysteme (MMS 2009), 3. März 2009 in Münster, Germany. - (GI-Edition : Proceedings ; 146)
Y1  - 2009
SN  - 978-3-88579-240-6
N1  - Link führt zum ganzen Konferenzband.
SP  - 109
EP  - 122
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Fuchs, Britta
A1  - Ritz, Thomas
A1  - Halbach, Bastian
A1  - Hartl, Florian
ED  - Marca, David A.
T1  - Blended shopping : interactivity and individualization
T2  - Proceedings of the International Conference on e-Business : Seville, Spain, 18 - 21 July 2011 ; [... integrated in the ICETE (International Conference on e-Business and Telecommunications) joint conference]
Y1  - 2011
SN  - 978-989-8425-70-6
SP  - 47
EP  - 52
PB  - SciTePress
CY  - [Lissabon]
ER  - 
TY  - CHAP
A1  - Tomic, Igor
A1  - Penna, Andrea
A1  - DeJong, Matthew
A1  - Butenweg, Christoph
A1  - Senaldi, Ilaria
A1  - Guerrini, Gabriele
A1  - Malomo, Daniele
A1  - Beyer, Katrin
T1  - Blind predictions of shake table testing of aggregate masonry buildings
T2  - 17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021.
N2  - In many historical centers in Europe, stone masonry is part of building aggregates, which developed when the layout of the city or village was densified. The analysis of such building aggregates is very challenging and modelling guidelines missing. Advances in the development of analysis methods have been impeded by the lack of experimental data on the seismic response of such aggregates. The SERA project AIMS (Seismic Testing of Adjacent Interacting Masonry Structures) provides such experimental data by testing an aggregate of two buildings under two horizontal components of dynamic excitation. With the aim to advance the modelling of unreinforced masonry aggregates, a blind prediction competition is organized before the experimental campaign. Each group has been provided a complete set of construction drawings, material properties, testing sequence and the list of measurements to be reported. The applied modelling approaches span from equivalent frame models to Finite Element models using shell elements and discrete element models with solid elements. This paper compares the first entries, regarding the modelling approaches, results in terms of base shear, roof displacements, interface openings, and the failure modes.
KW  - Historical centres
KW  - Stone masonry
KW  - Adjacent buildings
KW  - Shake table test
KW  - Blind prediction competition
Y1  - 2020
N1  - Die Konferenz war ursprünglich für den 13-18 September 2020 angesetzt.
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Krämer, Heinz-Josef
T1  - Blitzschutzkonzept für eine bauliche Anlage mit Stahlkonstruktion und metallenen Wänden
N2  - Bauliche Anlagen mit Stahlkonstruktionen (bzw. auch Stahlbetonskelett- Konstruktionen) und metallenen Wänden sind bereits in sehr großer Zahl errichtet. Dazu gehören kleinere bis größere Lagerhallen ebenso wie Einkaufszentren. Sie zeichnen sich durch große Flexibilität, einfache Planung, kurze Bauzeit und rel. geringe Kosten aus. Auch in der nahen Zukunft ist deshalb mit Planung und Errichtung weiterer solcher baulicher Anlagen zu rechnen. Abhängig von der Nutzung der Hallen sind auch mehr oder weniger umfangreiche elektrische und elektronische Systeme vorhanden, die wichtige Funktionen sicherstellen müssen. Der Blitzschutz für diese baulichen Anlagen sollte sich also nicht nur im „klassischen“ Gebäude-Blitzschutz nach DIN V 0185-3 VDE V 0185 Teil 3 [1] erschöpfen; ein Ergänzung hin zu einem sinnvollen Grundschutz der elektrischen und elektronischen Systeme nach DIN V 0185-4 VDE V 0185 Teil 4 [2] ist anzuraten. Im folgenden Beitrag wird ein Konzept vorgestellt, mit dem ein hochwertiger Blitzschutz sowohl der baulichen Anlage und der darin befindlichen Personen, als auch der elektrischen und elektronischen Systeme verwirklicht werden kann. Insbesondere bei großflächigen Hallen stellen sich dabei besondere Anforderungen. Das Konzept und die zugehörigen blitzschutz-technischen Maßnahmen können drei Hauptbereichen zugeordnet werden: - Äußerer Blitzschutz; - Innerer Blitzschutz; - weitergehende besondere Maßnahmen. Das Konzept sowie die Maßnahmen werden allgemein beschrieben und teilweise anhand einer ausgeführten Anlage mit Fotos beispielhaft dokumentiert.
KW  - Blitzschutz
KW  - Stahlbetonkonstruktion
KW  - Lightning protection
KW  - reinforced concrete
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Neskakis, Apostolos
A1  - Müller, Klaus-Peter
T1  - Blitzschutzkonzept für eine netz-autarke Hybridanlage am Beispiel der Anlage VATALI auf Kreta
N2  - Netz-autarke Anlagen bestehen üblicherweise aus einer oder mehreren Photovoltaik- (PV-) Anlagen, ggf. auch Solarthermie- (ST-) Anlagen und einem oder mehreren kleineren Windgeneratoren (sie werden deshalb auch als Hybridanlagen bezeichnet) und werden vor allem in Gegenden mit sehr schlechter öffentlicher Energieversorgung eingesetzt, d.h. insbesondere in rel. dünn bewohnten Gebieten und in Entwicklungsländern. Der Blitzschutz von netz-autarken Hybridanlagen ist ein bislang noch vergleichsweise unzureichend bearbeitetes Fachgebiet. Für große Windenergie-Anlagen (WEA) wurde in den letzten Jahren eine Zahl von FuE-Projekten durchgeführt, zum Großteil finanziert durch die öffentliche Hand, zum kleineren Teil auch durch die Industrie, d.h. die WEAHersteller. Dabei wurden bestehende Defizite im Design der WEA festgestellt und Maßnahmen vorgeschlagen, die vor den mechanischen Zerstörungen insbesondere des Rotors und vor den Störungen und Zerstörungen an den elektrischen / elektronischen Systemen der WEA weitgehend Schutz bieten [1, 2, 3]. Der Stand-der- Normung ist im Entwurf DIN VDE 0127 Teil 24 „Blitzschutz für Windenergieanlagen“ (dt. Übersetzung des internationalen Drafts IEC 61400-24 „Wind turbine generator systems; Part 24: Lightning Protection“) dokumentiert [4]. Die Maßnahmen sind allerdings insbesondere für größere WEA vorgesehen; im Falle kleinerer WEA lassen sie sich nur bedingt umsetzen. Trotzdem sind auch kleinere WEA rel. stark blitzeinschlaggefährdet, wenn sie auf einer Bergkuppe o.ä. platziert werden. Für solche kleinere WEA, wie sie bei Hybridanlagen üblicherweise Verwendung finden, müssen die Blitzschutzmaßnahmen aus der DIN VDE 0127 Teil 24 angepasst werden. Für PV- und ST-Anlagen ist eine entsprechende Blitzschutz-Norm noch nicht in Sicht. Hier ist vor allem der Schutz gegen direkte Blitzeinschläge in die Anlage bzw. die Gebäude noch nicht ausreichend beachtet. Blitzfangeinrichtungen sind oft nicht vorgesehen. In aller Regel hat man dabei bisher eine Ausführungsform des Blitzschutzes realisiert, die primär einen Ferneinschlag berücksichtigt und die dabei entstehenden induzierten, rel. energieschwachen Überspannungen durch schwächere Schutzelemente wie Rückstromdioden, Bypassdioden und zum Teil thermisch überwachte Varistoren begrenzt [5, 6, 7]. Diese Schutzelemente können allerdings bei Naheinschlägen bzw. Direkteinschlägen überlastet und damit zerstört werden. Darüber hinaus können Nahoder Direkteinschläge auch zur Schwächung der elektrischen Festigkeit der PVModulisolierung führen. Die Folge davon sind lokale extreme Wärmeentwicklungen, die sogar ein Schmelzen von Glas (sekundärer Langzeiteffekt) hervorrufen könnten. Bei einem Blitzeinschlag in die netz-autarke Hybridanlage VATALI auf Kreta im Jahre 2000 wurden sowohl einige mechanische wie auch elektrische Komponenten der Anlage zerstört bzw. zum Teil schwer beschädigt. Die Anlage VATALI besaß zum Zeitpunkt des Blitzeinschlags keinen wirksamen Blitzschutz. Der Gesamtschaden der Hardware belief sich auf ca. 60.000,- EURO. Die exponierte Stellung der Anlage auf einer Bergspitze stellte und stellt nach wie vor ein enormes Blitzeinschlag-Risiko dar, so dass auch zukünftig mit Blitzeinwirkungen gerechnet werden muss. Die Anlage wurde inspiziert, blitzschutz-technische Erfordernisse definiert und daraus Ertüchtigungsmaßnahmen abgeleitet, die mit überschaubarem Aufwand realisierbar sind.
KW  - Blitzschutz
KW  - Hybridanlage
KW  - Regenerative Energieanlagen
KW  - Lightning protection
KW  - renewable energy
KW  - hybrid system
Y1  - 2001
ER  - 
TY  - CHAP
A1  - Krichel, Frank
A1  - Kern, Alexander
A1  - Krämer, Heinz-Josef
A1  - Wettingfeld, Jürgen
A1  - Reetz, Josef
A1  - Kienlein, Manfred
T1  - Blitzschutzmaßnahmen für Photovoltaik- und kleine Windenergieanlagen – Einige Beispiele
T1  - Lightning Protection for photovoltaic and small wind energy power plants
N2  - Ein von der Arbeitsgemeinschaft (AG) Solar NRW und diversen Industriepartnern gefördertes und an der Fachhochschule Aachen, Abt. Jülich durchgeführtes Forschungsprojekt „Blitzschutz für netz-autarke Hybridanlagen“ machte es möglich, sich mit dem Blitzschutz speziell solcher Anlagen näher zu beschäftigen. Vermehrt bekannt gewordene Schadensfälle an nicht netz-gekoppelten Hybridanlagen waren der Auslöser, den Schutz zu überdenken. Definiertes Ziel war es, für netz-autarke energietechnische Anlagen ein Konzept zum Schutz vor Blitzeinwirkungen zu erstellen. Diese Anlagen bestehen üblicherweise aus einer oder mehreren Photovoltaikanlagen, ggf. auch Solarthermieanlagen und einem oder mehreren kleineren Windgeneratoren (sie werden deshalb auch als Hybridanlagen bezeichnet). Zur Erhöhung der Versorgungssicherheit kann noch ein Dieselaggregat dazukommen. Hybridanlagen werden vor allem in Gebieten mit sehr schlechter öffentlicher Energieversorgung eingesetzt, d.h. insbesondere in relativ dünn bewohnten Gebieten und in Entwicklungsländern. Dem Blitzschutz von Hybridanlagen kommt dabei eine steigende Bedeutung zu. Besonderes Augenmerk in dem genannten Forschungsprojekt sollte dabei auf die technisch/wirtschaftliche Ausgewogenheit des Schutzes gelegt werden: • die Schutzmaßnahmen sollen nur in solchen Fällen eingesetzt werden, wo dies als Ergebnis von Risikoanalysen sinnvoll erscheint; • für typische netz-autarke Hybridanlagen sollen die Schutzmaßnahmen ohne deutliche Verteuerung realisierbar sein (es soll also kein absoluter Schutz realisiert werden; ggf. soll lediglich der auftretende Schaden soweit möglich minimiert werden). Dazu wurde in einem ersten Schritt zunächst eine Aufnahme des Iststandes einiger typischer netz-autarker Hybridanlagen und deren einzelnen Komponenten durchgeführt. Aufgrund dessen wurde eine umfassende Risikoanalyse zur Blitzbedrohung dieser Anlagen auf der Basis von VDE V 0185 Teil 2:2002-11 [1] erstellt. Die Ergebnisse mündeten in ein technisch/wirtschaftlich ausgewogenes Konzept für den Anlagen- Blitzschutz (d.h. insbesondere dem Schutz vor direkten Blitzeinschlägen und deren unmittelbaren Auswirkungen) nach VDE V 0185 Teil 3:2002-11 [2] und für den Elektronik-Blitzschutz (d.h. für den Schutz vor Überspannungen durch direkte, insbesondere aber auch indirekte Blitzeinschläge) nach VDE V 0185 Teil 4:2002-11 [3]. Aufgrund der gesammelten Ergebnisse konnten dabei allgemeine Empfehlungen für den Äußeren und Inneren Blitzschutz von regenerativen Energieerzeugungssystemen erstellt werden. Diese sollen in Schulungen einmünden, die für Hersteller und Betreiber von Hybridanlagen angeboten werden. Durch die Anwendung wird der Schutz der Anlagen vor Blitzeinwirkung und elektromagnetischen Störungen verbessert, was sich in einer reduzierten Ausfallwahrscheinlichkeit bzw. erhöhten Verfügbarkeit wiederspiegelt. An einigen ausgewählten Anlagen werden mit Hilfe der im Projekt involvierten Industriepartner die Schutzmaßnahmen realisiert. Hierbei entstanden den Eigentümern bzw. Betreibern der Anlagen keine Kosten. In diesem Beitrag werden beispielhaft drei Anlagenprojekte detailliert gezeigt. Es handelt sich dabei um eine Schweinezuchtfarm in Magallón (Spanien, Zaragozza), das bioklimatische Haus (Kreta, Heraklion) und die Tegernseer- Hütte (Deutschland, Lenggries).
KW  - Blitzschutz
KW  - Photovoltaikanlagen
KW  - Windenergieanlagen
KW  - Lightning protection
KW  - photovoltaic system
KW  - wind turbine
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel B.
A1  - Schlenkhoff, Andreas
ED  - Carstensen, Dirk
T1  - Blocksteinrampen in Riegelbauweise : Neue Bemessungsansätze
T2  - Staubauwerke : planen, bauen, betreiben; 35. Dresdner Wasserbaukolloquium 2012, 08. - 09. März 2012
Y1  - 2012
SN  - 978-3-86780-261-1
SP  - 317
EP  - 326
PB  - Selbstverl. der Techn. Univ.
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
A1  - Vedral, Andreas
T1  - Bluetooth - Integrationstechnologie für automotive Anwendungen
T2  - Begleittexte zum Entwicklerforum ZigBee & Co. - Drahtlose Nahbereichsnetzwerke : 20. April 2005, München-Dornach
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Bluetooth in Embedded-Anwendungen in der Automatisierungstechnik
T2  - Tagungsband / SPS IPC Drives 2002 : 13. Fachmesse und Kongress, 26. - 28. November 2002 Nürnberg; elektrische Automatisierung - Systeme und Komponenten. (Praxiswissen IEE - Automatisierung)
Y1  - 2002
SN  - 3-7785-2863-7
SP  - 28
EP  - 37
PB  - Hüthig
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Hildebrandt, Arndt
A1  - Oertel, Mario
A1  - Schlenkhoff, Andreas
A1  - Schlurmann, Torsten
ED  - McKee Smith, Jane
T1  - Bore propagation over a submerged horizontal plate by physical and numerical simulation
T2  - Coastal engineering 2008 : proceedings of the 31st international conference; Hamburg, Germany, 31 August - 5 September 2008 ; Vol. 4
Y1  - 2008
SN  - 9814277401 ; 9789814277402
SP  - 3542
EP  - 3553
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sesov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - Boundary effects on seismic analysis of multi-storey frames considering soil structure interaction phenomenon
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed
Y1  - 2014
SN  - 978-3-658-02809-1 (Print) ; 978-3-658-02810-7
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_47
SP  - 569
EP  - 576
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Berg, Tobias
A1  - Leicht-Scholten, Carmen
T1  - Breaking the habit – new approaches in engineering education
T2  - Proceedings of the 43rd Annual Conference of the European Society for Engineering Education
N2  - Within the framework of the project a genderand diversity-oriented teaching evaluation and modern, media-supported blended learning approaches were used in order to achieve the intended goals. First research results of the literature and status quo analysis were already implemented and tested in newly designed teaching approaches, for example in a multidisciplinary introductory lecture of civil engineering at RWTH Aachen University.
KW  - teaching
KW  - engineering education
KW  - gender and diversity
KW  - best practice
Y1  - 2015
SN  - 978-2-87352-012-0
N1  - Annual Conference of the European Society for Engineering Education , Orléans , France , SEFI , 2015-06-29 - 2015-07-02
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
T1  - Brettsperrholz – Verbindungen mit mechanischen Verbindungsmitteln
T2  - Ingenieurholzbau, Karlsruher Tage 2007 : Forschung für die Praxis; 4. und 5. Oktober 2007; Tagungsband / Universität Karlsruhe (TH), Lehrstuhl für Ingenieurholzbau und Baukonstruktionen
Y1  - 2007
SP  - 62
EP  - 73
PB  - Bruder-Verlag
CY  - Köln
ER  - 
TY  - CHAP
A1  - Sajatovic, Miodrag
A1  - Rihacek, Christoph
A1  - Haindl, Bernhard
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
T1  - Broadband VHF (B-VHF) project achievements and follow-on activities
T2  - Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007
Y1  - 2007
SN  - 1-4244-1216-1
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Siegert, Petra
A1  - Iding, Hans
A1  - Baumann, Martin
A1  - McLeish, Michael J.
A1  - Kenyon, George L.
A1  - Pohl, Martina
T1  - Broadening of the substrate spectra of two ThDP-dependent decarboxylases using site-directed-mutagenesis
T2  - Proceedings of the 4th International Congress on Biochemical Engineering : 17 and 18 February 2000, Stuttgart
Y1  - 2000
SN  - 3-8167-5570-4
SP  - 38
EP  - 42
ER  - 
TY  - CHAP
A1  - Gorzalka, Philip
A1  - Dahlke, Dennis
A1  - Göttsche, Joachim
A1  - Israel, Martin
A1  - Patel, Dhruvkumar
A1  - Prahl, Christoph
A1  - Schmiedt, Jacob Estevam
A1  - Frommholz, Dirk
A1  - Hoffschmidt, Bernhard
A1  - Linkiewicz, Magdalena
T1  - Building Tomograph–From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input
T2  - EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Christen, Marc
A1  - Bartelt, Perry
A1  - Kowalski, Julia
A1  - Stoffel, Lukus
T1  - Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS
T2  - Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008
N2  - Numerical models have become an essential part of snow avalanche engineering. Recent
advances in understanding the rheology of flowing snow and the mechanics of entrainment and
deposition have made numerical models more reliable. Coupled with field observations and historical
records, they are especially helpful in understanding avalanche flow in complex terrain. However, the
application of numerical models poses several new challenges to avalanche engineers. A detailed
understanding of the avalanche phenomena is required to specify initial conditions (release zone
dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer
based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this
paper we discuss these problems by presenting the computer model RAMMS, which was specially
designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged
equations governing avalanche flow with first and second-order numerical solution schemes. A
tremendous effort has been invested in the implementation of advanced input and output features.
Simulation results are therefore clearly and easily visualized to simplify their interpretation. More
importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model
performance. In this paper we present the governing differential equations, highlight some of the input
and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that
occurred in April 2008, near Klosters/Monbiel, Switzerland.
KW  - snow
KW  - avalanche
Y1  - 2008
SP  - 709
EP  - 716
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Schelthoff, Christof
A1  - Mathieu, Moritz
T1  - Calculation of interception efficiencies for mesh-type air-terminations according to IEC 62305-3 using a dynamic electro-geometrical model
T2  - International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna
Y1  - 2012
SN  - 978-1-4673-1896-9 (E-Book) ; 978-1-4673-1898-3 (Print)
SP  - 1
EP  - 6
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Calculation of load carrying capacity of shell structures with elasto-plastic material by direct methods
N2  - Proceedings of the International Conference on Material Theory and Nonlinear Dynamics. MatDyn. Hanoi, Vietnam, Sept. 24-26, 2007, 8 p. In this paper, a method is introduced to determine the limit load of general shells using the finite element method. The method is based on an upper bound limit and shakedown analysis with elastic-perfectly plastic material model. A non-linear constrained optimisation problem is solved by using Newton’s method in conjunction with a penalty method and the Lagrangean dual method. Numerical investigation of a pipe bend subjected to bending moments proves the effectiveness of the algorithm.
KW  - Finite-Elemente-Methode
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Birgel, Stefan
A1  - Leschinger, Tim
A1  - Wegmann, Kilian
A1  - Staat, Manfred
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Calculation of muscle forces and joint reaction loads in shoulder area via an OpenSim based computer calculation
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
N1  - In der Druckausgabe des Abstractbandes ist dieser Beitrag lose als Erratum beigefügt.
SP  - 116
EP  - 117
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Pfundt, H.
A1  - Vogelsang, D.
A1  - Gerling, Ulrich
T1  - Calculation of the crust profile in aluminium reduction cells by thermal computer modelling
T2  - Light metals 1989 : 118th annual meeting of the Minerals, Metals and Materials Society, Las Vegas, NV, Feb. 27 - Mar. 03. 1989
Y1  - 1988
SP  - 371
EP  - 377
PB  - Minerals, Metals and Materials Soc.
CY  - Warrendale, Pa.
ER  - 
TY  - CHAP
A1  - Wahle, Michael
T1  - Calculation of the response of heat exchanger tubes with regard to nonlinear and prestressing effects
T2  - Vibration in nuclear plant : proceedings of the 3rd International Conference on Vibration in Nuclear Plant held on 11 - 14 May 1982, Keswick ; vol. 1
Y1  - 1983
SN  - 0-7277-0192-4 (Druckausg.)
SN  - 978-0-7277-5270-3 (E-Book)
N1  - International Conference on Vibration in Nuclear Plant <3, 1982, Keswick>
N1  - Paper 1.10 (Log No. 71)
SP  - 162
EP  - 183
PB  - British Nuclear Energy Society
CY  - London
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Beierl, Ottmar
A1  - Zischank, Wolfgang
T1  - Calculation of the separation distance according to IEC 62305-3: 2006-10 - Remarks for the application and simplified methods
N2  - [Paper of the X International Symposium on Lightning Protection 9th - 13th November, 2009 - Curitiba, Brazil. 6 pages] The international standard IEC 62305-3, published in 2006, requires as an integral part of the lightning protection system (LPS) the consideration of a separation distance between the conductors of the LPS and metal and electrical installations inside the structure to be protected. IEC 62305-3 gives two different methods for this calculation: a standard, simplified approach and a more detailed approach, which differ especially regarding the treatment of the current sharing effect on the LPS conductors. Hence, different results for the separation distance are possible, leading to some discrepancies in the use of the standard. The standard approach defined in the main part (Clause 6.3) and in Annex C of the standard in some cases may lead to a severe oversizing of the required separation distance. The detailed approach described in Annex E naturally gives more correct results. However, a calculation of the current sharing amongst all parts of the air-termination and downconductor network is necessary, in many cases requiring the use of network analysis programs. In this paper simplified methods for the assessment of the current sharing are presented, which are easy to use as well as sufficiently adequate.
KW  - Blitzschutz
KW  - Lightning protection
Y1  - 2009
N1  - Paper in: [10. International Symposium on Lightning Protection 9. 13. November 2009, Curitiba, Brasilien. 6 Seiten]
ER  - 
TY  - CHAP
A1  - Kalker, Ines
A1  - Toll, B.
A1  - Holler, Stefan
A1  - Butenweg, Christoph
A1  - Topping, B. H. V.
A1  - Mota Soares, C. A.
T1  - Capacity analysis of textile retrofitted unreinforced masonry
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...
Y1  - 2004
SN  - 0-948749-95-4
U6  - http://dx.doi.org/10.4203/ccp.79.194
SP  - 431
EP  - 432
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Reindl, Lukas
T1  - Capacity design of masonry buildings under cyclic loading
T2  - Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Liège on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...
Y1  - 2008
SN  - 978-2-87456-063-7
SP  - 201
EP  - 208
PB  - Editions de l'Université de Liège
CY  - Liège
ER  - 
TY  - CHAP
A1  - Schiffer, Fabian
A1  - Bragard, Michael
T1  - Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - http://dx.doi.org/10.1109/REM.2019.8744101
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Case studies in initial sizing for hybrid-electric general aviation aircraft
T2  - 2018 AIAA/IEEE Electric Aircraft Technologies Symposium, Cincinnati, Ohio
Y1  - 2018
U6  - http://dx.doi.org/10.2514/6.2018-5005
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of heterogeneous and volatile product data
T2  - DATA 2020: Data Management Technologies and Applications
N2  - The integration of frequently changing, volatile product data from different manufacturers into a single catalog is a significant challenge for small and medium-sized e-commerce companies. They rely on timely integrating product data to present them aggregated in an online shop without knowing format specifications, concept understanding of manufacturers, and data quality. Furthermore, format, concepts, and data quality may change at any time. Consequently, integrating product catalogs into a single standardized catalog is often a laborious manual task. Current strategies to streamline or automate catalog integration use techniques based on machine learning, word vectorization, or semantic similarity. However, most approaches struggle with low-quality or real-world data. We propose Attribute Label Ranking (ALR) as a recommendation engine to simplify the integration process of previously unknown, proprietary tabular format into a standardized catalog for practitioners. We evaluate ALR by focusing on the impact of different neural network architectures, language features, and semantic similarity. Additionally, we consider metrics for industrial application and present the impact of ALR in production and its limitations.
Y1  - 2021
SN  - 978-3-030-83013-7
U6  - http://dx.doi.org/10.1007/978-3-030-83014-4_7
N1  - International Conference on Data Management Technologies and Applications, DATA 2020, 7-9 July
SP  - 134
EP  - 153
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schmidts, Oliver
A1  - Kraft, Bodo
A1  - Winkens, Marvin
A1  - Zündorf, Albert
T1  - Catalog integration of low-quality product data by attribute label ranking
T2  - Proceedings of the 9th International Conference on Data Science, Technology and Applications - Volume 1: DATA
Y1  - 2020
SN  - 978-989-758-440-4
U6  - http://dx.doi.org/10.5220/0009831000900101
SP  - 90
EP  - 101
ER  - 
TY  - CHAP
A1  - Schulte-Fischedick, Jan
A1  - Tamme, Rainer
A1  - Herrmann, Ulf
T1  - CFD Analysis of the Cool Down Behaviour of Molten Salt Thermal Storage Systems
T2  - ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences, ASME 2008 2nd International Conference on Energy Sustainability, Jacksonville, Florida, USA, August 10–14, 2008. - Vol. 2
Y1  - 2009
SN  - 978-0-7918-4320-8
U6  - http://dx.doi.org/doi:10.1115/ES2008-54101
N1  - Paper No. ES2008-54101
SP  - 515
EP  - 524
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Luft, Angela
A1  - Gebhardt, Andreas
A1  - Balc, Nicolae
T1  - Challenges of additive manufacturing in production systems
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901003
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01003
ER  - 
TY  - CHAP
A1  - Reisert, Steffen
A1  - Geissler, H.
A1  - Flörke, R.
A1  - Weiler, C.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - Characterisation of aseptic sterilisation processes using an electronic nose
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 45
EP  - 45
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Characteristics of cross-bar block ramp flows
T2  - Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto
Y1  - 2012
SN  - 978-989-8509-01-7
ER  - 
TY  - CHAP
A1  - Roth, J.
A1  - Möhring, S.
A1  - Tippkötter, Nils
T1  - Characterization and evaluation of lignocellulosic biomass 130 hydrolysates for ABE fermentation
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 130
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Tellis, Jane J.
A1  - Duhovic, Miro
T1  - Characterization of tool-part-interaction an interlaminar friction for manufacturing process simulation
T2  - ECCM 17, 17th European Conference on Composite Materials, München, DE, Jun 26-30, 2016
Y1  - 2016
SN  - 978-3-00-053387-7
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Kaspar, K.
A1  - Groebel, Simone
A1  - Kuperjans, Isabel
A1  - Dielmann, Klaus-Peter
A1  - Selmer, Thorsten
T1  - Charakterisierung der Biozönose von Biogasfermentern in Abhängigkeit verschiedener Substrate
T2  - Biogas 2013 : 6. Innovationskongress, 23. - 24.05.2013, Osnabrück, Tagungsband
Y1  - 2013
SN  - 978-3-9813776-3-7
SP  - 69
EP  - 74
PB  - Profair Consult+Project
CY  - Hildesheim
ER  - 
TY  - CHAP
A1  - Buxbaum, Bernd
A1  - Schwarte, Rudolf
A1  - Xu, Zhanping
A1  - Ringbeck, Thorsten
A1  - [u.a.], 
T1  - Charge Transfer Simulation in PMD-Structures
T2  - Sensor 99 : proceedings / 9th Int'l Fair and Conference for Sensors, Transducers & Systems, May 18 - 20, 1999, Exhibition Centre Nürnberg/Germany. - Vol. 2
Y1  - 1999
N1  - International Fair and Conference for Sensors, Transducers and Systems <9, 1999, Nürnberg> ; Internationale Messe mit Kongress für Sensoren, Messaufnehmer und Systeme  <9, 1999, Nürnberg>
SP  - 427
EP  - 432
PB  - AMA Service GmbH
CY  - Wunsdorf
ER  - 
TY  - CHAP
A1  - Höfler, M.
A1  - Kneer, R.
A1  - Groß, Rolf Fritz
A1  - Kehrmann, K.
ED  - Vorobieff, P.
T1  - Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows
T2  - Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ;  Volume 89)
Y1  - 2015
SN  - 978-1-84564-946-3 (Print-Ausgabe)
SN  - 978-1-84564-947-0 (Online-Ausgabe)
SN  - 1746-4471
SP  - 89
EP  - 101
PB  - WIT Press
CY  - Southampton
ER  -