TY  - CHAP
A1  - Wollert, Jörg
T1  - Wireless systems for machinery safety : Requirements and solutions for wireless real time systems
T2  - 16th International Conference on Research and Education in Mechatronics (REM), 2015
Y1  - 2015
SN  - 978-3-945728-01-7
U6  - http://dx.doi.org/10.1109/REM.2015.7380377
SP  - 88
EP  - 91
ER  - 
TY  - CHAP
A1  - Anthrakidis, Anette
A1  - Herrmann, Ulf
A1  - Schorn, Christian
A1  - Schwarzer, Klemens
A1  - Wedding, Philipp
T1  - Weiterentwicklung und Erprobung eines neuartigen Verfahrens zur Bestimmung der Effizienz von konzentrierenden solarthermischen Kollektoren
T2  - 25. OTTI Symposium Thermische Solarenergie
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Wallnöfer, Armin
A1  - Drath, Rainer
A1  - Hüning, Felix
T1  - Was ist Funktionales Engineering? Einordnung, Definition, Randbedingungen
T2  - Automation 2015 : 16. Branchentreff der Mess- und Automatisierungstechnik, 11. und 12. Juni 2015, Baden-Baden / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
Y1  - 2015
SN  - 978-3-18-092258-4
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Tewari, Udit
A1  - Neshvad, Surena
A1  - Goldbach, Daniel
A1  - Sachau, Jürgen
T1  - Verification and Implementation of Pseudo-Random-Binary-Sequences for Online Determination of Grid Impedance Spectrum
T2  - International Conference on Renewable Energies and Power Quality (ICREPQ´15), La Conuna, Spain, 25th to 27th March, 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Nakagawa, Masaki
A1  - Michaux, Frank
A1  - Kallweit, Stephan
A1  - Maeda, Kazuhiro
T1  - Unsteady flow measurements in the wake behind a wind-tunnel car model by using high-speed planar PIV
T2  - 11TH International Symposium on Particle Image Velocimetry – PIV15 Santa Barbara, California, September 14-16, 2015
N2  - This study investigates unsteady characteristics of the wake behind a 28%-scale car model in a wind tunnel using highspeed planar particle image velocimetry (PIV). The car model is based on a hatchback passenger car that is known to have relatively high fluctuations in its aerodynamic loads. This study primarily focuses on the lateral motion of the flow on the horizontal plane to determine the effect of the flow motion on the straight-line stability and the initial steering response of the actual car on a track. This paper first compares the flow fields in the wake behind the above mentioned model obtained using conventional and high-speed planar PIV, with sampling frequencies of 8 Hz and 1 kHz, respectively. Large asymmetrically coherent flow structures, which fluctuate at frequencies below 2 Hz, are observed in the results of highspeed PIV measurements, whereas conventional PIV is unable to capture these features of the flow owing to aliasing. This flow pattern with a laterally swaying motion is represented by opposite signs of cross-correlation coefficients of streamwise velocity fluctuations for the two sides of the car model. Effects of two aerodynamic devices that are known to reduce the
fluctuation levels of the aerodynamic loads are then extensively investigated. The correlation analyses reveal that these devices indeed reduce the fluctuation levels of the flow and the correlation values around the rear combination-lamp, but it is found that the effects of these devices are different around the c-pillar.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Sadeghfam, Arash
T1  - Universaler Plasmajet für verschiedene Behandlungsschritte der Klebetechnik
T2  - Tagungsband / 15. Kolloquium Gemeinsame Forschung in der Klebtechnik : 3. und 4. März 2015, Maternushaus, Köln / DECHEMA
Y1  - 2015
SP  - 85
EP  - 87
CY  - Köln
ER  - 
TY  - CHAP
A1  - Schänzle, Christian
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Pelz, Peter
T1  - TOR – Towards the energetically optimal ventilation system
KW  - Energy
KW  - Efficiency
KW  - Ventilation System
KW  - Discrete Optimisation
KW  - TGA
Y1  - 2015
N1  - EST 2015, Karlsruhe, 19-21 Mai 2015
ER  - 
TY  - CHAP
A1  - Gregorio, Fabrizio de
A1  - Fatigati, Giovanni
A1  - Kallweit, Stephan
T1  - Tiltrotor airframe flow field characterization by SPIV
T2  - 11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Booysen, Tracy
A1  - Mathew, Thomas
A1  - Knox, Greig
A1  - Fong, W. K.
A1  - Stüttgen, Marcel
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - The Scarab Project
T2  - ICRA 2015 Developing Countries Forum
N2  - Urban Search and Rescue (USAR) is an active research
field in the robotics community. Despite recent advances
for many open research questions, these kind of systems are
not widely used in real rescue missions. One reason is that such
systems are complex and not (yet) very reliable; another is that
one has to be an robotic expert to run such a system. Moreover,
available rescue robots are very expensive and the benefits of
using them are still limited.
In this paper, we present the Scarab robot, an alternative
design for a USAR robot. The robot is light weight, humanpackable
and its primary purpose is that of extending the
rescuer’s capability to sense the disaster site. The idea is that a
responder throws the robot to a certain spot. The robot survives
the impact with the ground and relays sensor data such as
camera images or thermal images to the responder’s hand-held
control unit from which the robot can be remotely controlled.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Ferrein, Alexander
A1  - Reuter, Sebastian
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - The RoboCup Logistics League as a Holistic Multi-Robot Smart Factory Benchmark
T2  - Proceedings of the IROS 2015 Open forum on evaluation of results, replication of experiments and benchmarking in robotics research
N2  - With autonomous mobile robots receiving increased
attention in industrial contexts, the need for benchmarks
becomes more and more an urgent matter. The RoboCup
Logistics League (RCLL) is one specific industry-inspired scenario
focusing on production logistics within a Smart Factory.
In this paper, we describe how the RCLL allows to assess the
performance of a group of robots within the scenario as a
whole, focusing specifically on the coordination and cooperation
strategies and the methods and components to achieve them.
We report on recent efforts to analyze performance of teams in
2014 to understand the implications of the current grading
scheme, and derived criteria and metrics for performance
assessment based on Key Performance Indicators (KPI) adapted
from classic factory evaluation. We reflect on differences and
compatibility towards RoCKIn, a recent major benchmarking
European project.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Lakemeyer, Gerhard
A1  - Ferrein, Alexander
ED  - Finzi, Alberto
T1  - The RoboCup Logistics League as a Benchmark for Planning in Robotics
T2  - Proceedings of the 3rd Workshop on Planning and Robotics (PlanRob-15); Jerusalem, Israel 7-8/6/2015
Y1  - 2015
SP  - 63
EP  - 68
ER  - 
TY  - CHAP
A1  - Göttsche, Joachim
A1  - Korn, Michael
A1  - Amato, Alexandre
T1  - The Passivhaus concept for the Arabian Peninsula – An energetic-economical evaluation considering the thermal comfort
T2  - QScience Proceedings: Vol 2015
N2  - The Passivhaus building standard is a concept developed for the realization of energy-efficient and economical buildings with a simultaneous high utilization comfort under European climate conditions. Major elements of the Passivhaus concept are a high thermal insulation of the external walls, the use of heat and/or solar shading glazing as well as an airtight building envelope in combination with energy-efficient technical building installations and heating or cooling generators, such as an efficient energy-recovery in the building air-conditioning. The objective of this research project is the inquiry to determine the parameters or constraints under which the Passivhaus concept can be implemented under the arid climate conditions in the Arabian Peninsula to achieve an energy-efficient and economical building with high utilization comfort. In cooperation between the Qatar Green Building Council (QGBC), Barwa Real Estate (BRE) and Kahramaa the first Passivhaus was constructed in Qatar and on the Arabian Peninsula in 2013. The Solar-Institut Jülich of Aachen University of Applied Science supports the Qatar Green Building Council with a dynamic building and equipment simulation of the Passivhaus and the neighbouring reference building. This includes simulation studies with different component configurations for the building envelope and different control strategies for heating or cooling systems as well as the air conditioning of buildings to find an energetic-economical optimum. Part of these analyses is the evaluation of the energy efficiency of the used energy recovery system in the Passivhaus air-conditioning and identification of possible energy-saving effects by the use of a bypass function integrated in the heat exchanger. In this way it is expected that on an annual basis the complete electricity demand of the building can be covered by the roof-integrated PV generator.
Y1  - 2015
U6  - http://dx.doi.org/10.5339/qproc.2015.qgbc.38
N1  - 10.5339/qproc.2015.qgbc.38 = abstract -
Qatar Green Building Conference 2015 - The Vision, 38.
ER  - 
TY  - CHAP
A1  - Lopes, Pedro
A1  - Bung, Daniel B.
A1  - Leandro, Jorge
A1  - Carvalho, Rita F.
T1  - The effect of cross-waves in physical stepped spillway models
T2  - E-proceedings of the 36th IAHR World Congress ; 28 June - 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Wolf, Martin
A1  - Lenz, Laura L.
T1  - The economic effectiveness of serious games in the healthcare environment : application and evaluation of the Comparative Transformation Model (CTM)
T2  - IEEE 3rd International Conference on Serious Games and Applications for Health : SeGAH 2014 ; Rio de Janeiro, Brazil, May 14 - 16
Y1  - 2015
SN  - 978-1-4799-4823-9
U6  - http://dx.doi.org/10.1109/SeGAH.2014.7067089
SP  - 135
EP  - 142
PB  - IEEE [u.a.]
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Gabrielli, Roland Antonius
A1  - Seelmann, Jürgen
A1  - Großmann, Agnes
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - System Architecture of a Lunar Industry Plant Using Regolith
T2  - Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Srivastava, Alok
A1  - Knolle, F.
A1  - Schnug, E.
A1  - Scherer, Ulrich W.
T1  - Study of Trace Elements in Water Bodies of the Harz Mts. Region, Germany using Total Reflection X Ray Fluorescence (TXRF)
T2  - DAE-BRNS 12th National Symposium on Nuclear and Radiochemistry NUCAR 2015, Feb. 9-13, Mumbai, India, Mumbai, India; 02/2015
Y1  - 2015
SP  - 355
EP  - 356
ER  - 
TY  - CHAP
A1  - Gabrielli, Roland Antonius
A1  - Mathies, Johannes
A1  - Großmann, Agnes
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith
T2  - International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Konstantinidis, K.
A1  - Kowalski, Julia
A1  - Martinez, C. F.
A1  - Dachwald, Bernd
A1  - Ewerhart, D.
A1  - Förstner, R.
T1  - Some necessary technologies for in-situ astrobiology on enceladus
T2  - Proceedings of the International Astronautical Congress
Y1  - 2015
SN  - 978-151081893-4
N1  - 6th International Astronautical Congress 2015: Space - The Gateway for Mankind's Future, IAC 2015; Jerusalem; Israel; 12 October 2015 through 16 October 2015
SP  - 1354
EP  - 1372
ER  - 
TY  - CHAP
A1  - Peloni, Alessandro
A1  - Ceriotti, Matteo
A1  - Dachwald, Bernd
T1  - Solar-Sailing Trajectory Design for Close-up NEA Observations Mission
T2  - 4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
N1  - IAA-PDC-15-P-19
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Lange, Caroline
A1  - Dachwald, Bernd
A1  - Grimm, Christian
A1  - Koch, Aaron
A1  - Ulamec, Stephan
T1  - Small Spacecraft in Planetary Defence Related Applications–Capabilities, Constraints, Challenges
T2  - IEEE Aerospace Conference
N2  - In this paper we present an overview of the characteristics and peculiarities of small spacecraft missions related to planetary defence applications. We provide a brief overview of small spacecraft missions to small solar system bodies. On this background we present recent missions and selected projects and related studies at the German Aerospace Center, DLR, that contribute to planetary defence related activities. These range from Earth orbit technology demonstrators to active science missions in interplanetary space. We provide a summary of experience from recently flown missions with DLR participation as well as a number of studies. These include PHILAE, the lander recently arrived on comet 67P/Churyumov-Gerasimenko aboard ESA’s ROSETTA comet rendezvous mission, and the Mobile Asteroid Surface Scout, MASCOT, now underway to near-Earth asteroid (162173) 1999 JU3 aboard the Japanese sample-return probe HAYABUSA-2. We introduce the differences between the conventional methods employed in the design, integration and testing of large spacecraft and the new approaches developed by small spacecraft projects. We expect that the practical experience that can be gained from projects on extremely
compressed timelines or with high-intensity operation phases on a newly explored small solar system body can contribute significantly to the study, preparation and realization of future planetary defence related missions. One is AIDA (Asteroid Impact & Deflection Assessment), a joint effort of ESA,JHU/APL, NASA, OCA and DLR, combining JHU/APL’s DART (Double Asteroid Redirection Test) and ESA’s AIM (Asteroid Impact Monitor) spacecraft in a mission towards
near-Eath binary asteroid (65803) Didymos.
KW  - small spacecraft
KW  - planetary defence
KW  - asteroid lander
KW  - solar sail
KW  - flotilla missions
Y1  - 2015
N1  - 2015 IEEE Aerospace Conference, 7.-13. Mar. 2015, Big Sky, Montana, USA.
SP  - 1
EP  - 18
ER  - 
TY  - CHAP
A1  - Kolditz, Melanie
A1  - Albin, Thivaharan
A1  - Fasse, Alessandro
A1  - Brüggemann, Gert-Peter
A1  - Abel, Dirk
A1  - Albracht, Kirsten
T1  - Simulative Analysis of Joint Loading During Leg Press Exercise for Control Applications
T2  - IFAC-PapersOnLine
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.ifacol.2015.10.179
N1  - IFAC-PapersOnLine 48-20;
Conference Paper Archive
VL  - 48
IS  - 20
SP  - 435
EP  - 440
ER  - 
TY  - CHAP
A1  - Behbahani, Mehdi
A1  - Rible, Sebastian
A1  - Moulinec, Charles
A1  - Fournier, Yvan
A1  - Nicolai, Mike
A1  - Crosetto, Paolo
T1  - Simulation of the FDA Centrifugal Blood Pump Using High Performance Computing
T2  - World Academy of Science, Engineering and Technology International Journal of Mechanical and Mechatronics Engineering
Y1  - 2015
VL  - 9
IS  - 5
ER  - 
TY  - CHAP
A1  - Kronhardt, Valentina
A1  - Alexopoulos, Spiros
A1  - Reißel, Martin
A1  - Latzke, Markus
A1  - Rendon, C.
A1  - Sattler, Johannes, Christoph
A1  - Herrmann, Ulf
T1  - Simulation of operational management for the Solar Thermal Test and Demonstration Power Plant Jülich using optimized control strategies of the storage system
T2  - Energy procedia
Y1  - 2015
SN  - 1876-6102
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Kremers, Alexander
A1  - Pieper, Martin
T1  - Simulation and Verification of Bionic Heat Exchangers with COMSOL Multiphysics® Software
T2  - COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France
Y1  - 2015
PB  - COMSOL
CY  - Göttingen ; Berlin
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
T1  - Simulating beating cardiomyocytes with electromechanical coupling
T2  - II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)
Y1  - 2015
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Michel, P.
A1  - Zilligen, H.
A1  - Rosin, J.
A1  - Butenweg, Christoph
T1  - Seismisches Verhalten pfahlgegründeter Tankbauwerke
T2  - Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Zürich. (Dokumentation / SIA ; D 0255)
Y1  - 2015
SN  - 978-3-03732-060-0
SP  - 181
EP  - 188
PB  - SGEB
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Schmitt, T.
A1  - Butenweg, Christoph
T1  - Seismische Einwirkungen auf erdverlegte Rohrleitungssysteme – Parameterstudie
T2  - Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Zürich. (Dokumentation / SIA ; D 0255)
Y1  - 2015
SN  - 978-3-03732-060-0
SP  - 199
EP  - 206
PB  - SGEB
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Stahlberg, Nadine
A1  - Barnat, Miriam
T1  - Schreiben in der didaktischen Diskussion zum Conceptual Change: Potenziale für das Lernen in MINT-Fächern
T2  - Minttendrin Lehre im Dialog : Tagungsband zum 2. HDMINT-Symposium 2015, 24./25. September, Technische Hochschule Nürnberg Georg Simon Ohm / Diz, Didaktikzentrum
Y1  - 2015
N1  - HDMINT Symposium <2., 2015, Nürnberg>
SP  - 169
EP  - 175
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - Robots: challenges, chances and risks for solving 21st century problems
T2  - President’s Invitation Lecture / South African Institute of Electrical Engineers : May 21 & 22, 2015, University of Johannesburg
Y1  - 2015
SP  - 1
EP  - 45
ER  - 
TY  - CHAP
A1  - Sirazitdinova, Y.
A1  - Dulzon, A.
A1  - Müller, Burghard
T1  - Project management practices in engineering university
T2  - 21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015; National Research Tomsk Polytechnic UniversityTomsk; Russian Federation; 5 October 2015 through 9 October 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1088/1757-899X/93/1/012080
N1  - IOP Conference Series: Materials Science and Engineering
Vol. 93, Issue 1
ER  - 
TY  - CHAP
A1  - Peloni, A.
A1  - Ceriotti, M.
A1  - Dachwald, Bernd
T1  - Preliminary trajectory design of a multiple NEO rendezvous mission through solar sailing
T2  - Proceedings of the International Astronautical Congress, IAC, Vol. 8, 2014
Y1  - 2015
SN  - 978-1-63439-986-9
SP  - 5352
EP  - 5366
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Taddei, Francesca
A1  - Lozana, Lara
A1  - Michel, Philipp
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
ED  - Papadrakakis, Manolis
ED  - Papadrakakis, M.
ED  - Papadopoulos, V.
ED  - Plevris, V.
T1  - Practical recommendations for the foundation design of onshore wind turbines including soil-structure interaction
T2  - 5th International Conference on Computational Methods in Structural , Hersonissos, Greece Dynamics and Earthquake Engineering, COMPDYN 2015, 25.05.2015-27.05.2015, Hersonissos, Greece.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Großmann, Agnes
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Overview of the MultiRob 3D Lunar Industrial Development Project
T2  - Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - Operational modal analysis of a cantilever in a wind tunnel using optical fiber bragg grating sensors
T2  - 6th International Operational Modal Analysis Conference. IOMAC´15. 2015 May 12-14 Gijon - Spain
Y1  - 2015
U6  - http://dx.doi.org/10.13140/RG.2.1.3753.0324
ER  - 
TY  - CHAP
A1  - Bischof, Michael
A1  - Ey, Ludger
A1  - Kuck, Alexander
A1  - Rahier, Michael
A1  - Ritz, Thomas
ED  - Weisbecker, Anette
T1  - Nutzerzentrierte Gestaltung und Entwicklung eines kontextsensitiven HMI
T2  - Mensch und Computer 2015 : Workshop
Y1  - 2015
SN  - 978-3-11-044333-2
SP  - 467
EP  - 474
PB  - De Gruyter Oldenbourg
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Balmes, Jan P.
A1  - Bung, Daniel B.
T1  - Numerical simulation of erosion processes on crossbar block ramps
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Theis, Jochen
A1  - Krisnamurthy, Hemanth Kumar
A1  - Schmitz, Günter
ED  - Jamal, Rahman
T1  - Modellbasierte Simulation und experimentelle Anwendung von mechatronischen Systemen in der Lehre in Verbindung mit NI myRIO und dem NI LabVIEW Interface Toolkit
T2  - Virtuelle Instrumente in der Praxis 2015 : Mess-, Steuer-, Regel- und Embedded-Systeme; Begleitband zum 20. VIP-Kongress
Y1  - 2015
SN  - 978-3-8007-3669-0
SP  - 362
EP  - 365
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, N. H.
A1  - Staat, Manfred
T1  - Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Bühler, P.
A1  - Leandro, J.
A1  - Bung, Daniel B.
A1  - Lopes, P.
A1  - Carvalho, R.
T1  - Measuring void fraction of a stepped spillway with non-intrusive methods using different image resolutions
T2  - 2nd International Workshop on Hydraulic Structures : Data Validation : Coimbra, Portugal, 8-9 May 2015
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Weber, Tobias
T1  - Manufacturing Process Simulation for Tooling Optimization: Reduction of Quality Issues During Autoclave Manufacturing of Composite Parts
T2  - Proceedings of SAMPE Europe Conference 2015, Amiens, France
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Hailer, Benjamin
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
T2  - Proceedings of SAMPE Europe Conference, Amiens , France
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Light-stimulated hydrogel actuators with incorporated graphene oxide for microfluidic applications
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P5.8
SP  - 206
EP  - 209
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Reichert, Walter
T1  - Learning to Program Mobile Robots in the ROS Summer School Series
T2  - Proceedings 6th International Conference on Robotics in Education (RiE 15)
N2  - The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Seefeldt, Patric
A1  - Bauer, Waldemar
A1  - Dachwald, Bernd
A1  - Grundmann, Jan Thimo
A1  - Straubel, Marco
A1  - Sznajder, Maciej
A1  - Tóth, Norbert
A1  - Zander, Martin E.
T1  - Large lightweight deployable structures for planetary defence: solar sail propulsion, solar concentrator payloads, large-scale photovoltaic power
T2  - 4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
N1  - IAA-PDC-15-P-20
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Bronder, Thomas
A1  - Wu, Chunsheng
A1  - Schöning, Michael Josef
T1  - Label-free sensing of biomolecules by their intrinsic molecular charge using field-effect devices
T2  - Semiconductor Micro- and Nanoelectonics : Proceedings of the tenth international conference, Yerevan, Armenia, September 11-13
Y1  - 2015
SN  - 978-5-8084-1991-9
SP  - 61
EP  - 63
ER  - 
TY  - CHAP
A1  - Billerbeck, Katrin
A1  - Ladwig, Tina
A1  - Salden, Peter
A1  - Barnat, Miriam
ED  - Kammasch, Gudrun
T1  - Kompetenzen visualisieren als Notenersatz? Annäherung an eine didaktische Herausforderung
T2  - Wie viel (Grundlagen) Wissen braucht technische Bildung? : Wege zu technischer Bildung : Referate der 9. Ingenieurpädagogischen Regionaltagung 2014 an der Universität Siegen, 6.-8. November 2014
Y1  - 2015
SN  - 978-3-00-049835-0
N1  - Ingenieurpädagogische Regionaltagung <9., 2014, Siegen>
SP  - 57
EP  - 63
PB  - Berlin
CY  - IPW
ER  - 
TY  - CHAP
A1  - Goldmann, Jan-Peter
A1  - Braunstein, Bjoern
A1  - Heinrich, Kai
A1  - Sanno, Maximilian
A1  - Stäudle, Benjamin
A1  - Ritzdorf, Wolfgang
A1  - Brüggemann, Gert-Peter
A1  - Albracht, Kirsten
T1  - Joint work of the take-off leg during elite high jump
T2  - Proceedings of the 33th International Conference on Biomechanics in Sports (ISBS)
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Krückel, Kai
A1  - Nolden, Florian
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - Intuitive visual teleoperation for UGVs using free-look augmented reality displays
T2  - 2015 IEEE International Conference on Robotics and Automation (ICRA), Seattle, WA
Y1  - 2015
U6  - http://dx.doi.org/10.1109/ICRA.2015.7139809
SP  - 4412
EP  - 4417
ER  - 
TY  - CHAP
A1  - Wiezik, P.
A1  - Hötter, Jan-Steffen
A1  - Gebhardt, Andreas
T1  - Integration des Laserpolierens in den SLM-Prozess
T2  - DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, Fügen von faserverstärkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vorträge der Veranstaltungen, Nürnberg, DE, 15.-17. Sep, 2015
Y1  - 2015
SN  - 978-3-945023-46-4
VL  - 315
SP  - 117
EP  - 120
PB  - Verl. für Schweißen und verwandte Verfahren, DVS-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Gebhardt, Andreas
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Tedjasukmana, Osmond Sanjaya
T1  - Improving additive manufacturing by image processing and robotic milling
T2  - 2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden
Y1  - 2015
U6  - http://dx.doi.org/10.1109/CoASE.2015.7294217
SP  - 924
EP  - 929
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
T1  - Image processing for bubble image velocimetry in self-aerated flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Bonney, Gregor
A1  - Höfken, Hans-Wilhelm
A1  - Paffen, Benedikt
A1  - Schuba, Marko
T1  - ICS/SCADA Security - Analysis of a Beckhoff CX5020 PLC
T2  - 1st International Conference on Information Systems Security and Privacy : ICISSP 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Hybrid investigation of air transport processes in moderately sloped stepped spillway flows
T2  - E-proceedings of the 36th IAHR World Congress 28 June – 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Nithiarasu, Perumal
T1  - Homogenization of a cardiac tissue construct
T2  - CMBE15 : 4th International Conference on Computational & Mathematical Biomedical Engineering ; 29th June - 1st July 2015 ; École Normale Supérieure de Cachan ; Cachan (Paris), France
Y1  - 2015
SN  - 2227-9385
N1  - Konferenzband unter:
http://www.compbiomed.net/getfile.php?type=12/site_documents&id=Proceedings_2227-9385_compressed.pdf
SP  - 645
EP  - 648
PB  - CMBE
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Pricking, Sebastian
A1  - Gebs, Raphael
A1  - Fleischhaker, Robert
A1  - Kleinbauer, Jochen
A1  - Budnicki, Aleksander
A1  - Sutter, Dirk
A1  - Killi, Alexander
A1  - Weiler, Sascha
A1  - Mielke, M.
A1  - Beaudou, B.
A1  - Debord, B.
A1  - Gerome, F.
A1  - Benabid, F.
ED  - Dorsch, Friedhelm
T1  - Hollow core fiber delivery of sub-ps pulses from a TruMicro 5000 Femto edition thin disk amplifier
T2  - High-power laser materials processing: Lasers, beam delivery, diagnostics, and applications IV : 7 Februar 2015, San Francisco, USA. - (SPIE proceedings series ; 9356)
Y1  - 2015
SN  - 978-162841446-2
U6  - http://dx.doi.org/10.1117/12.2079289
SN  - 0277-786X
SP  - 935602
PB  - SPIE, International Society for Optical Engineering
ER  - 
TY  - CHAP
A1  - Rosin, J.
A1  - Henneböhl, B.
A1  - Butenweg, Christoph
T1  - Globale Stabilitätsanalysen zylindrischer, seismisch belasteter Tanks auf numerischer Grundlage
T2  - Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Zürich. (Dokumentation / SIA ; D 0255)
Y1  - 2015
SN  - 978-3-03732-060-0
SP  - 173
EP  - 180
PB  - SGEB
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
T1  - Generative Fertigungsverfahren in der Produktentwicklung
T2  - Spritzgießen 2015
Y1  - 2015
SN  - 978-3-18-234336-3
SP  - 1
EP  - 19
PB  - VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Roosen, Petra
A1  - Feyerl, Günter
T1  - Gender-specific perception and utilization of personal use vehicles
T2  - FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1
Y1  - 2015
SN  - 978-1-5108-0209-4
SP  - 418
EP  - 425
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Cordero, Frederico
A1  - Dachwald, Bernd
A1  - Koncz, Alexander
A1  - Krause, Christian
A1  - Mikschl, Tobias
A1  - Montenegro, Sergio
A1  - Quantius, Dominik
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seefeldt, Patric
A1  - Tóth, Norbert
A1  - Wejmo, Elisabet
T1  - From Sail to Soil – Getting Sailcraft Out of the Harbour on a Visit to One of Earth’s Nearest Neighbours
T2  - 4th IAA Planetary Denfense Conference - PDC 2015,  13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Braun, Sebastian
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
A1  - Breuer, Michael
T1  - Forensische Sicherung von DSLRoutern
T2  - Proceedings of D-A-CH Security 2015. St. Augustin 8. und 9. September 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Kilic, S. A.
A1  - Raatschen, Hans-Jürgen
A1  - Astaneh-Asl, A.
A1  - Apaydin, N. M.
T1  - Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge
T2  - Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges
Y1  - 2015
SN  - 9781138027572
SP  - 1169
EP  - 1173
PB  - CRC Press
CY  - Leiden
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications
T2  - ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15–19, 2015
Y1  - 2015
SN  - 978-0-7918-5668-0
U6  - http://dx.doi.org/10.1115/GT2015-42043
SP  - V04AT04A008
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - CHAP
A1  - Kolditz, Melanie
A1  - Albracht, Kirsten
A1  - Fasse, Alessandro
A1  - Albin, Thivaharan
A1  - Brüggemann, Gert-Peter
A1  - Abel, Dirk
T1  - Evaluation of an industrial robot as a leg press training device
T2  - XV International Symposium on Computer Simulation in Biomechanics July 9th – 11th 2015, Edinburgh, UK
Y1  - 2015
SP  - 41
EP  - 42
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - Europe and South African collaboration on the Mechatronics and Robotics systems as part of the SA Robotics Center
T2  - ICRA 2015 Developing Countries Forum
N2  - Mechatronics consist of the integration of mechanical
engineering, electronic integration and computer science/
engineering. These broad fields are essential for robotic
systems, yet it makes it difficult for the researchers to specialize
and be experts in all these fields. Collaboration between
researchers allow for the integration of experience and specialization,
to allow optimized systems. Collaboration between the
European countries and South Africa is critical, as each country
has different resources available, which the other countries
might not have. Applications with the need for approval of
any restrictions, can also be obtained easier in some countries
compared to others, thus preventing the delays of research.
Some problems that have been experienced are discussed, with
the Robotics Center of South Africa as a possible solution.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fissabre, Anke
T1  - Die Augsburger Dachterrassen der Renaissance
T2  - Lutherstadt Wittenberg, Torgau und der Hausbau im 16. Jahrhundert : Bericht über die Tagung des Arbeitskreises für Hausforschung e.V. in der Lutherstadt Wittenberg vom 19.-13. Oktober 2011.
Y1  - 2015
SN  - 978-3-89445-517-0
N1  - Jahrbuch für Hausforschung ; 62
SP  - 571
EP  - 585
PB  - Jonas Verlag für Kunst und Literatur
CY  - Marburg
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Kazari, Masahide
A1  - Okada, Kunio
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haji Ayed, Anis
T1  - Developments of Hydrogen Dry Low Emission Combustion Technology
T2  - Annual Congress of Gas Turbine Society Japan, 2015
Y1  - 2015
N1  - Abstract in engl.; Text in japanisch
ER  - 
TY  - CHAP
A1  - Anthrakidis, Anette
A1  - Herrmann, Ulf
A1  - Schorn, Christian
A1  - Schwarzer, Klemens
A1  - Wedding, Philipp
A1  - Weis, Fabian
T1  - Development and Testing of a Novel Method for the Determination of the Efficiency of Concentrating Solar Thermal Collectors
T2  - Conference Proceedings Solar World Congress 2015, Daegu, Korea, 08 – 12 November 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Development and Testing of a Low NOx Micromix Combustion Chamber for an Industrial Gas Turbine
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0092
SP  - 131
EP  - 140
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Linguistic Terms in Golog
T2  - FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0074-1424-4
SN  - 1613-0073
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemueller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling Logistics Robots with the Action-based Language YAGI
T2  - Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Latzke, Markus
A1  - Alexopoulos, Spiros
A1  - Kronhardt, Valentina
A1  - Rendón, Carlos
A1  - Sattler, Johannes, Christoph
T1  - Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver
T2  - Energy Procedia
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.egypro.2015.03.142
SN  - 1876-6102
N1  - International Conference on Concentrating Solar Power and Chemical Energy Systems, SolarPACES 2014, Beijing, China
SP  - 1327
EP  - 1334
ER  - 
TY  - CHAP
A1  - Lindenlauf, Simon
A1  - Höfken, Hans-Wilhelm
A1  - Schuba, Marko
T1  - Cold Boot Attacks on DDR2 and DDR3 SDRAM
T2  - 10th International Conference on Availability, Reliability and Security (ARES) 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1109/ARES.2015.28
SP  - 287
EP  - 292
ER  - 
TY  - CHAP
A1  - Höfler, M.
A1  - Kneer, R.
A1  - Groß, Rolf Fritz
A1  - Kehrmann, K.
ED  - Vorobieff, P.
T1  - Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows
T2  - Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ;  Volume 89)
Y1  - 2015
SN  - 978-1-84564-946-3 (Print-Ausgabe)
SN  - 978-1-84564-947-0 (Online-Ausgabe)
SN  - 1746-4471
SP  - 89
EP  - 101
PB  - WIT Press
CY  - Southampton
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Berg, Tobias
A1  - Leicht-Scholten, Carmen
T1  - Breaking the habit – new approaches in engineering education
T2  - Proceedings of the 43rd Annual Conference of the European Society for Engineering Education
N2  - Within the framework of the project a genderand diversity-oriented teaching evaluation and modern, media-supported blended learning approaches were used in order to achieve the intended goals. First research results of the literature and status quo analysis were already implemented and tested in newly designed teaching approaches, for example in a multidisciplinary introductory lecture of civil engineering at RWTH Aachen University.
KW  - teaching
KW  - engineering education
KW  - gender and diversity
KW  - best practice
Y1  - 2015
SN  - 978-2-87352-012-0
N1  - Annual Conference of the European Society for Engineering Education , Orléans , France , SEFI , 2015-06-29 - 2015-07-02
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - Biomechanical study of the female pelvic floor dysfunction using the finite element method
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Kubalski, T.
A1  - Butenweg, Christoph
T1  - Ausfachungsmauerwerk unter kombinierter seismischer Beanspruchung
T2  - Erdbeben und bestehende Bauten : 14. D-A-C-H Tagung 20.08. - 21.08.2015, ETH Zürich. (Dokumentation / SIA ; D 0255)
Y1  - 2015
SN  - 978-3-03732-060-0
SP  - 117
EP  - 122
PB  - SGEB
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Pirovano, Laura
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Attitude and orbital modeling of an uncontrolled solar-sail experiment in low-Earth orbit
T2  - 25th International Symposium on Space Flight Dynamics ISSFD
N2  - Gossamer-1 is the first project of the three-step Gossamer roadmap, the purpose of which is to develop, prove and demonstrate that solar-sail technology is a safe and reliable propulsion technique for long-lasting and high-energy missions. This paper firstly presents the structural analysis performed on the sail to understand its elastic behavior. The results are then used in attitude and orbital simulations. The model considers the main forces and torques that a satellite experiences in low-Earth orbit coupled with the sail deformation. Doing the simulations for varying initial conditions in attitude and rotation rate, the results show initial states to avoid and maximum rotation rates reached for correct and faulty deployment of the sail. Lastly comparisons with the classic flat sail model are carried out to test the hypothesis that the elastic behavior does play a role in the attitude and orbital behavior of the sail
KW  - Solar sail
KW  - Gossamer structures
KW  - Attitude dynamics
KW  - Orbital dynamics
Y1  - 2015
N1  - 25th International Symposium on Space Flight Dynamics ISSFD
October 19 – 23, 2015, Munich, Germany
https://issfd.org/2015/
SP  - 1
EP  - 15
ER  - 
TY  - CHAP
A1  - Pirovano, Laura
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Attitude and Orbital Dynamics Modeling for an Uncontrolled Solar-Sail Experiment in Low-Earth Orbit
T2  - 25th International Symposium on Spaceflight Dynamics, 2015, Munich, Germany
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Schänzle, Christian
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
T1  - As good as it can be: Ventilation system design by a combined scaling and discrete optimization method
T2  - Proceedings of FAN 2015
N2  - The understanding that optimized components do not automatically lead to energy-efficient systems sets the attention from the single component on the entire technical system. At TU Darmstadt, a new field of research named Technical Operations Research (TOR) has its origin. It combines mathematical and technical know-how for the optimal design of technical systems. We illustrate our optimization approach in a case study for the design of a ventilation system with the ambition to minimize the energy consumption for a temporal distribution of diverse load demands. By combining scaling laws with our optimization methods we find the optimal combination of fans and show the advantage of the use of multiple fans.
Y1  - 2015
N1  - Proceedings of FAN 2015, Lyon (France), 15 – 17 April 2015
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Kazari, Masahide
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haj Ayed, Anis
T1  - Application of Low NOx Micro-Mix Hydrogen Combustion to Industrial Gas Turbine Combustor and Conceptual Design
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0238
SP  - 141
EP  - 146
ER  - 
TY  - CHAP
A1  - Wulfhorst, Helene
A1  - Merseburg, Johannes
A1  - Tippkötter, Nils
T1  - Analyse von Lignocellulose mittels dynamischer Differenzkalorimetrie und Infrarot – Spektrometrie
T2  - 12. Dresdner Sensor-Symposium 2015 2015-12-07 - 2015-12-09
Y1  - 2015
SN  - 978-3-9813484-9-1
U6  - http://dx.doi.org/10.5162/12dss2015/P6.2
SP  - 210
EP  - 215
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - An electromechanical model for cardiac tissue constructs
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Vergé, Angela
A1  - Pelz, Peter F.
T1  - Algorithmische Struktursynthese eines hydrostatischen Getriebes
T2  - Antriebssysteme 2015 : Elektrik, Mechanik, Fluidtechnik in der Anwendung
Y1  - 2015
SN  - 978-3-18-092268-3
N1  - Antriebssysteme 2015 - Elektrik, Mechanik, Fluidtechnik in der Anwendung. VDI/VDE-Fachtagung. 11.11.15-12.11.15, Aachen.

Veröffentlicht in der Reihe VDI-Berichte, Bandnummer 2268.
SP  - 145
EP  - 155
PB  - VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Otten, D.
A1  - Schmid, M.
A1  - Weber, Tobias
T1  - Advances In Sheet Metal-Forming: Reduction Of Tooling Cost By Methodical Optimization
T2  - Proceedings of SAMPE Europe Conference, Amiens , France
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Großmann, Agnes
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
T1  - Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant
T2  - International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Renftle, Georg
T1  - Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces
T2  - International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA
N2  - The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Renftle, Georg
T1  - Additive manufacturing of drainage segments for cooling system of crucible melting furnaces
T2  - Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1002/9781119211662.ch14
SN  - 0196-6219
SP  - 123
EP  - 131
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - A simplification for shakedown analysis of hardening structures
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Bagheri, Mohsen
A1  - Schleupen, Josef
A1  - Dahmann, Peter
A1  - Kallweit, Stephan
T1  - A multi-functional device applying for the safe maintenance at high-altitude on wind turbines
T2  - 20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A Local Planner for Ackermann-Driven Vehicles in ROS SBPL
T2  - Proceedings of the International Conference on Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech), 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1109/RoboMech.2015.7359518
SP  - 172
EP  - 177
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - 3D-Mapping von Straßentunneln
T2  - 16. Geokinematischer Tag, 07. und 08. Mai 2015 : Tagungsband / Technische Universität Bergakademie Freiberg
Y1  - 2015
N1  - Schriftenreihe des Instituts für Markscheidewesen und Geodsäsie an der Technischen Universität Bergakademie Freiberg
SP  - 31
EP  - 40
ER  -