TY  - JOUR
A1  - Starke, Günther
A1  - Kampker, M.
T1  - Von der Großserienfertigung in die Werkstatt. Der Schlüssel für den Robotereinsatz in der Kleinserienfertigung liegt in der Programmierung
JF  - Produktion, Landsberg. 36 (1997), H. 38
Y1  - 1997
SN  - 0344-6166
N1  - Zeitschriftenkurzaufsatz
SP  - 3
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Merten, Sabine
A1  - Brill, Manfred
A1  - Picard, Antoni (u.a.)
T1  - Vom virtuellen Wafer zum realen Drucksensor: Information – Communication – Knowledge engineering education today
JF  - Schriftenreihe Ingenieurpädagogik : Hochschule für Bildungswissenschaften in Klagenfurt ; Band 49
Y1  - 2003
N1  - Referate des 32. Symposiums der Internationalen Gesellschaft für Ingenieurpädagogik,
SP  - 318
EP  - 321
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Merten, Sabine
A1  - Brill, Manfred
A1  - Picard, Antoni (u.a.)
T1  - Vom virtuellen Wafer zum realen Drucksensor: Bildungsnetzwerke verbessern die Ausbildung in Hochtechnologien.
JF  - Kooperation und Arbeit in vernetzten Welten : Tagungsband der GFA-Herbstkonferenz 2003, Aachen, 29. September - 01. Oktober 2003 / Holger Luczak (Hrsg.)
Y1  - 2003
SN  - 3-935089-71-6
N1  - Konferenz-Einzelbericht: GfA Herbstkonf, HerbstKonf. der Gesellschaft für Arbeitswissenschaft
SP  - 238
EP  - 241
PB  - Ergonomia-Verl.
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Enning, Manfred
T1  - Vom "König der Landstraße" zur "Ameise 4.0"
JF  - ETR - Eisenbahntechnische Rundschau
N2  - Auf Eisenbahn- und Logistikkonferenzen werden gelegentlich Videos von Blattschneiderameisen gezeigt, die effizient und selbstorganisiert große Mengen Material durch den Dschungel transportieren. Daran sollen wir uns ein Beispiel nehmen.
Y1  - 2017
SN  - 0013-2845
VL  - 66
IS  - 1/2
SP  - 3
PB  - DVV Media Group
CY  - Hamburg
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - Voll im Bilde : Marktreport - Industrielle Bildverarbeitung
JF  - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1  - 1997
SN  - 0013-5658
N1  - Printausg. in der Bibliothek vorhanden: 63 ZS 030
VL  - Bd. 46
IS  - H. 2
SP  - 62
EP  - 67
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Merten, Sabine
A1  - Brill, Manfred
A1  - Cassel, Detlev (u.a.)
T1  - Virtuelle Sensor-Fertigung: Hightech mit LabVIEW
JF  - Virtuelle Instrumente in der Praxis : Messtechnik, Automatisierung ; Begleitband zum Kongress VIP 2003 / Rahman Jamal ; Hans Jaschinski (Hrsg.)
Y1  - 2003
SN  - 3-7785-2908-0
N1  - Konferenz-Einzelbericht: Praxiswissen Elektronik-Industrie: Messtechnik -Automatisierung
SP  - 465
EP  - 470
PB  - Hüthig
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
T1  - Virtual welding equipment for simulation of GMAW processes with integration of power source regulation
JF  - Frontiers of materials science
Y1  - 2011
SN  - 2095-0268 (E-Journal); 2095-025X (Print)
VL  - Vol. 5
IS  - Iss. 2
SP  - 79
EP  - 89
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Starke, Günther
T1  - Virtual Reality und Simulation als integrierte Werkzeuge für die Entwicklung mechatronischer Systeme
JF  - VDI-Berichte. 1631 (2001)
Y1  - 2001
SN  - 0083-5560
N1  - Konferenz-Einzelbericht
SP  - 1
EP  - 17
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Virtual Reality oder Rapid Prototyping?
JF  - Zeitschrift für die gesamte Wertschöpfungskette Automobilwirtschaft (2002)
Y1  - 2002
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - Vierzig Jahre Software-Desaster : zehn Regeln als Rüstzeug, um die Herausforderung Software-Entwicklung zu meistern
JF  - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1  - 2002
SN  - 0013-5658
N1  - Printausg. in der Bibliothek vorhanden: 63 ZS 030; 23 Z 263
VL  - Bd. 51
IS  - H. 25
SP  - 110
EP  - 115
ER  - 
TY  - JOUR
A1  - Klocke, Martina
A1  - Richert, Vera
A1  - Sube, Maike
T1  - Vier Jahre „Guter Studienstart im Ingenieurbereich“: Entwicklung und Perspektiven des „Nullten Semesters“ in Aachen
JF  - Zeitschrift für Beratung und Studium
N2  - Bereits 2015 wurde in der Zeitschrift „Qualität in der Wissenschaft“ (QiW) über das Kooperationsprojekt „Guter Studienstart im Ingenieurbereich“, das Orientierungssemester von RWTH und FH Aachen, berichtet. In diesem Artikel legen wir den Schwerpunkt auf die Entwicklung des Projekts in den Jahren 2015 bis 2018 und geben eine Rückschau sowie einen Ausblick auf die Entwicklungsperspektiven nach dem offiziellen Projektende.
Y1  - 2018
SN  - 1860-3068
VL  - 13
IS  - 1
SP  - 17
EP  - 22
PB  - Universitätsverlag Webler
CY  - Bielefeld
ER  - 
TY  - JOUR
A1  - Gartzen, Johannes
A1  - Heil, G.
T1  - Verwertung von Verbundfolien-Materialien
JF  - Spektrum der Wissenschaft (1993)
Y1  - 1993
SN  - 0170-2971
SP  - 114
EP  - 116
ER  - 
TY  - JOUR
A1  - Knepper, Ludger
T1  - Verstaerkte materialflusstechnische Integration von Hochregallagern in Produktions- und Umschlaganlagen
Y1  - 1983
N1  - Konferenz-Einzelbericht : 4. Int. Logistik Kongress. Deutsche Ges. f. Logistik (DGfL), Dortmund,  7.-9.12.1983. Kongresshandbuch 1
SP  - 219
EP  - 224
ER  - 
TY  - JOUR
A1  - Starke, Günther
T1  - Verschleißerkennung und -darstellung für das automatisierte Reparaturschweißen
JF  - Qualitätsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)
Y1  - 1999
SN  - 0418-9639
SP  - 111
EP  - 127
ER  - 
TY  - JOUR
A1  - Grundmann, Reinhard
T1  - Vergleich von Geräuschmessung und -prognose nach VDI 3731
JF  - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 44 (1993), H. 8
Y1  - 1993
SN  - 0017-9906
SP  - 513
EP  - 516
ER  - 
TY  - JOUR
A1  - Heinrichs, Horst
T1  - Verbindung von CAD und CAE mittels der systemneutralen CAD I Schnittstelle
Y1  - 1989
N1  - Konferenz-Einzelbericht : FEM '89, International FEM-Congress, IKO Software Service, Baden-Baden,  D, 20.-21.11.1989
SP  - 391
EP  - 408
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Kampker, M.
T1  - Verbesserte Roboterprogrammierung für die werkstattorientierte Fertigung
JF  - DVS-Berichte. 199 (1999)
Y1  - 1999
SN  - 0418-9639
N1  - Konferenz-Einzelbericht
SP  - 84
EP  - 90
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Vakuumgiessen innerhalb der Produktentstehung
JF  - Form und Werkzeug (2002)
Y1  - 2002
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - UWB, ZigBee und Z-Wave in der Automatisierung : neue Konkurrenzsituation bei Short Range Wireless?
JF  - Elektronik : Fachmedium für industrielle Anwender und Entwickler
Y1  - 2007
SN  - 0013-5658
N1  - Printausgabe in der Bibliothek vorhanden: 23 Z 133; 63 ZS 035
VL  - Bd. 56
IS  - H. 2
SP  - 62
EP  - 65
ER  - 
TY  - JOUR
A1  - Haselgruber, Nikolaus
A1  - Mautner, Karin
A1  - Thiele, Jan
T1  - Usage Space Analysis for Reliability Testing
JF  - Quality and Reliability Engineering International
N2  - During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety.
Y1  - 2010
U6  - http://dx.doi.org/10.1002/qre.1155
SN  - 1099-1638
N1  - Special Issue: Business and Industrial Statistics: Developments and Industrial Practices in Quality and Reliability
VL  - 26
IS  - 8
SP  - 877
EP  - 885
PB  - Wiley
CY  - New York
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Untersuchungen zum thermodynamischen Verhalten des Sauerstoffs in Kupfer-Wismut-Schmelzen bei 1200°C
JF  - Zeitschrift für Physikalische Chemie
Y1  - 1982
SN  - 0942-9352
VL  - 133
IS  - 2
SP  - 167
EP  - 174
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Untersuchungen zum Lösungsverhalten von Sauerstoff in Metallschmelzen
JF  - Neue Hütte : metallurgisch-metallkundliche Fachzeitschrift für Forschung und Praxis
Y1  - 1986
SN  - 0028-3207
VL  - 31
IS  - 7
SP  - 255
EP  - 258
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schiebahn, Alexander
T1  - Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2013
SN  - 0036-7184
VL  - Bd. 65
IS  - H. 6
SP  - 309
EP  - 313
PB  - DVS Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Drews, P.
T1  - Universelles Roboterprogrammiersystem zur Fertigung von Großfahrzeugen
JF  - Schweißen und Schneiden. 47 (1995), H. 9
Y1  - 1995
SN  - 0036-7184
SP  - 707
EP  - 713
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets
JF  - Journal of materials processing technology
N2  - Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking–Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.
Y1  - 2010
U6  - http://dx.doi.org/http10.1016/j.jmatprotec.2010.08.003
SN  - 0924-0136
VL  - 210
IS  - 15
SP  - 2188
EP  - 2196
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Berg, Alexander-Karl
A1  - Schleser, Markus
A1  - Delidovich, Artem
A1  - Houben, Alexander
T1  - Ultraschallunterstützter Schmelzklebstoffauftrag
JF  - adhäsion KLEBEN & DICHTEN
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s35145-018-0089-z
VL  - Volume 62
IS  - Issue 12
SP  - 32
EP  - 37
PB  - Springer
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Kinoo, B.
A1  - Krüger, M.
A1  - Schloßer, A.
T1  - Turbodiesel fährt umweltfreundlich ins nächste Jahrtausend. Neue Regelungs- und Steuerungsverfahren verbessern Fahrdynamik und Emissionsverhalten / Enning, M. ; Kinoo, B. ; Krüger, M. ; Schloßer, A.
JF  - RWTH-Themen. 1999 (1999), H. 2
Y1  - 1999
N1  - RWTH-Themen 2/1999: Automobiltechnik
SP  - 86
EP  - 91
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - TSN – Schluss mit dem Feldbuskrieg?
JF  - Design & Elektronik
Y1  - 2018
SN  - 0933-8667
N1  - Echtzeit für Industrie 4.0. - Teil 3
IS  - 3
SP  - 26
EP  - 31
PB  - WEKA-Fachmedien
CY  - München
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Plum, H.D.
A1  - Mathar, W.
A1  - Wolf, M.
T1  - TrueForm - erste Anwendung des neuen Sintermaterials mit Vakuumgießen und Investmentgießen
Y1  - 1996
N1  - Konferenz-Einzelbericht : RPD, Internat. Conf. on Rapid Product Development, Proc., Stuttgart, DE,  Jun 10-11
SP  - 231
EP  - 236
ER  - 
TY  - JOUR
A1  - Bucur, Alexandru
A1  - Lazarescu, Lucian
A1  - Pop, Grigore Marian
A1  - Achimas, Gheorghe
A1  - Gebhardt, Andreas
T1  - Tribological performance of biodegradable lubricants under different surface roughness of tools
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 1
SP  - 172
EP  - 178
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 946
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Vanlanduit, S.
A1  - Vanherzeele, J.
A1  - Brouns, M.
T1  - Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.
JF  - PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007
Y1  - 2007
N1  - PIV, Internional Symposium on Particle Image Velocimetry, 7 ; Datei: Vanlanduit.pdf
SP  - 1
EP  - 14
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Wesner, D. A.
A1  - Güntherodt, G.
T1  - Thickness dependence of the spin- and angle-resolved photoemission of ultrathin, epitaxial Ni(111)/W(110) layers
JF  - Applied Physics A: Materials Science and Processing. 49 (1989), H. 6
Y1  - 1989
SN  - 1432-0630
SP  - 573
EP  - 578
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Thickness dependence of the electronic structure of ultrathin, epitaxial Ni(111)/W(110) layers.
JF  - Physical Review B. 38 (1988), H. 14
Y1  - 1988
SN  - 1095-3795
SP  - 9451
EP  - 9456
ER  - 
TY  - JOUR
A1  - Abdel-Latif, Lotfie Ahmed
A1  - Peeken, Heinz
A1  - Benner, Joachim
T1  - Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory)
JF  - Journal of tribology
Y1  - 1985
SN  - 0742-4787
SN  - 1528-8897
VL  - 107
IS  - 4
SP  - 527
EP  - 537
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the lead-antimony system at 1173 K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1987
SN  - 0044-2658
VL  - 40
IS  - 6
SP  - 316
EP  - 319
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the copper-antimony system at 1473K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1988
SN  - 0044-2658
VL  - 41
IS  - 10
SP  - 498
EP  - 501
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1984
SN  - 0940-483X
SN  - 0005-9021
VL  - 88
IS  - 8
SP  - 707
EP  - 710
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1987
SN  - 0940-483X
SN  - 0005-9021
VL  - 91
IS  - 7
SP  - 790
EP  - 794
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Thermodynamic relations between component activities and gas solubilities in binary metallic systems
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1985
SN  - 0940-483X
SN  - 0005-9021
VL  - 89
IS  - 2
SP  - 130
EP  - 134
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Kapoor, Madan Lal
A1  - Frohberg, Martin G.
T1  - Thermodynamic behaviour of oxygen in molten substitutional alloy solvents
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 1
SP  - 53
EP  - 58
ER  - 
TY  - JOUR
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Thermisches Direktfügen von Metall und Kusntstoff: eine Alternative zur Klebtechnik
JF  - Adhäsion : Kleben & Dichten
N2  - Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik für Hochlohnländer“ der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktfügen, das eine stoffschlüssige Verbindung zwischen Kunststoff und Metall ermöglicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.
Y1  - 2012
U6  - http://dx.doi.org/10.1007/s35145-012-0005-x
SN  - 0001-8198 (E-Journal); 0001-8198 (Print)
N1  - Printausg. in der Bibliothek der FH Aachen vorhanden: 63 Z 807-2012
VL  - 56
IS  - 11
SP  - 36
EP  - 40
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Brill, Manfred
A1  - Cassel, Detlef (u.a.)
T1  - The Virtual Cleanroom – a new tool in teaching MST process technologies
JF  - mst news International newsletter on micro - nano Integration (2003)
Y1  - 2003
SN  - 0948-3128
SP  - 35
EP  - 36
ER  - 
TY  - JOUR
A1  - Hanrath, Wilhelm
A1  - Plesken, Wilhelm
T1  - The lattices of six-dimensional euclidean space
JF  - Mathematics of computation. 43 (1984), H. 168
Y1  - 1984
SN  - 0025-5718
SP  - 573
EP  - 587
ER  - 
TY  - JOUR
A1  - Panc, Nicolae
A1  - Contiu, Glad
A1  - Bocanet, Vlad
A1  - Thurn, Laura
A1  - Sabau, Emilia
T1  - The influence of cutting technology on surface wear hardness
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 3
SP  - 205
EP  - 210
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - The influence of adsorbates on the spin-resolved photoemission of Ni(110). Schmitt, W.; Kämper, K.-P.; Güntherodt, G.
JF  - Surface Science. 189/190 (1987)
Y1  - 1987
SN  - 0039-6028
N1  - Proceedings of the Ninth European Conference on Surface Science
SP  - 741
EP  - 507
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The calculation of component activities of binary metallic melts from their gas solubilities
JF  - Zeitschrift für Metallkunde
Y1  - 1985
SN  - 0044-3093
VL  - 76
IS  - 2
SP  - 135
EP  - 137
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 10
SP  - 665
EP  - 666
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Temperature dependence of the exchange splitting of Ni along the -L line
JF  - Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8
Y1  - 1988
N1  - Proceedings of the International conference on Magnetism. Part 1. ICM 88, Paris, France, Juli 25-29, 1988
SP  - 39
EP  - 40
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Temperature and wave-vector dependence of the spin-split band structure of Ni(111) along the Γ-L line
JF  - Physical Review B. 42 (1990), H. 16
Y1  - 1990
SN  - 1095-3795
SP  - 10696
EP  - 10705
ER  - 
TY  - JOUR
A1  - Thomas, Axel
T1  - Technologiezentren in der Aachener Region – Retrospektiven und Perspektiven
JF  - VM Verwaltung und Management
Y1  - 2018
U6  - http://dx.doi.org/10.5771/0947-9856-2018-3-147
SN  - 0947-9856
VL  - 24
IS  - 3
SP  - 147
EP  - 156
PB  - Nomos
CY  - Baden-Baden
ER  - 
TY  - JOUR
A1  - Klocke, Martina
T1  - Study Units in the CIM-Oriented Study Factory
JF  - Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner
Y1  - 1995
SN  - 3-540-19971-3
SP  - 38
EP  - 51
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Henn, Gudrun
A1  - Polaczek, Christa
T1  - Studienerfolg in den Ingenieurwissenschaften
JF  - Das Hochschulwesen : HSW ; Forum für Hochschulforschung, -praxis und -politik
Y1  - 2007
SN  - 0018-2974
VL  - 55
IS  - 5
SP  - 144
EP  - 147
ER  - 
TY  - JOUR
A1  - Wilbring, Daniela
A1  - Enning, Manfred
T1  - Stromversorgung auf Güterwagen - Aktuelle Bemühungen zur Standardisierung
JF  - ETR - Eisenbahntechnische Rundschau
Y1  - 2019
SN  - 0013-2845
VL  - 68
IS  - 11
SP  - 64
EP  - 67
PB  - DVV Media Group
CY  - Hamburg
ER  - 
TY  - JOUR
A1  - Heinrichs, Horst
T1  - STEP bietet mehr
Y1  - 1992
N1  - Konferenz-Einzelbericht : FEM '92 Congress, Int. FEM-Congress, Baden-Baden, DE, 16.-17. Nov, 1992
SP  - 327
EP  - 344
PB  - IKOSS
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Statistical modeling of laser welding of DP/TRIP steel sheets
JF  - Optics and laser technology
N2  - In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box–Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.optlastec.2011.05.025
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 92
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kunkel, Maximilian Hugo
A1  - Gebhardt, Andreas
A1  - Mpofu, Khumbaulani
A1  - Kallweit, Stephan
T1  - Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel
JF  - The International Journal of Advanced Manufacturing Technology
N2  - The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s00170-018-2040-8
SN  - 0268-3768
VL  - 98
IS  - 5-8
SP  - 1409
EP  - 1431
PB  - Springer
CY  - London
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Drews, P.
T1  - Stand der Sensorentwicklung fuer Schutzgasschweissroboter
JF  - Schweissen und Schneiden. 36 (1984), H. 4
Y1  - 1984
SN  - 0036-7184
SP  - 166
EP  - 172
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Anik, Salahaddin
T1  - Stand der Schweißtechnik in der Türkei
JF  - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 1991
SN  - 0036-7184
VL  - 43
IS  - 3
SP  - 142
EP  - 145
ER  - 
TY  - JOUR
A1  - Gartzen, Johannes
T1  - Spätes Aufwachen aus dem Dornröschenschlaf: Ohne Energie läuft nichts
JF  - Aachener Nachrichten (2011)
Y1  - 2011
SP  - 22
PB  - Zeitungsverl. Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Kurzawa, R.
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Spin-resolved photoemission study of in situ grown epitaxial Fe layers on W(110). Kurzawa, R.; Kämper, K.-P.; Schmitt, W.; Güntherodt, G.
JF  - Solid State Communications. 60 (1986), H. 10
Y1  - 1986
SN  - 0038-1098
SP  - 777
EP  - 780
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Abraham, D. L.
A1  - Hopster, H.
T1  - Spin-polarized electron-energy-loss spectroscopy on epitaxial fcc Co layers on Cu(001)
JF  - Physical Review B. 45 (1992), H. 24
Y1  - 1992
SN  - 1095-3795
SP  - 14335
EP  - 14346
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Pappas, D. P.
A1  - Miller, B. P.
A1  - Hopster, H.
T1  - Spin-dependent electron attenuation by transmission through thin ferromagnetic films . Pappas, D. P.; Kämper,K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Brundle, C. R.; Luntz, A. C.; Shen, Z.-X.
JF  - Physical Review Letters. 66 (1991), H. 4
Y1  - 1991
SN  - 1079-7114
SP  - 504
EP  - 507
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Dues, M. W.
A1  - Siekmann, H. E.
T1  - Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps / Dues, M. W. ; Kallweit, S. D. ; Siekmann, H. E.
JF  - Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.
Y1  - 1994
N1  - International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 5, 1994, Kaanapali, Hawaii
SP  - 98
EP  - 112
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - Softwaretrends in der Automatisierungstechnik
JF  - Etz : Elektrotechnik & Automation ; Organ des VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. und der Energietechnischen Gesellschaft im VDE (ETG) und der VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)
Y1  - 2005
SN  - 0948-7387
N1  - Printausgabe in der Bibliothek vorhanden: 63 ZS 035; 23 Z 133
VL  - 126
IS  - S2
SP  - 74
EP  - 79
ER  - 
TY  - JOUR
A1  - Barth, Heiko
A1  - Wollert, Jörg
T1  - SMARTes Konzept - von Produkt zur Fabrik
JF  - Facility-Management : Integration, Planung, Gebäudemanagement
Y1  - 1998
SN  - 0948-0048
VL  - Bd. 4
IS  - H. August
SP  - 30
EP  - 35
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Zack, Y.
A1  - Friedrich, A.-P.
A1  - Drichel, E.
T1  - Simulationswerkzeug bei der Herstellung von mikroelektronischen Komponenten. Schnelles Beurteilen von Alternativen in der Produktionsplanung und im Fertigungsdesign
JF  - FB/IE - Zeitschrift für Unternehmensentwicklung und Industrial Engineering. 52 (2003), H. 5
Y1  - 2003
SN  - 1431-2271
SP  - 204
EP  - 212
ER  - 
TY  - JOUR
A1  - Knepper, Ludger
T1  - Simulation: Vom reinen Planungswerkzeug zum Betriebsführungs-Instrument
JF  - Foerdern und Heben. 46 (1996), H. 3
Y1  - 1996
SN  - 0341-2636
SP  - 158
EP  - 160
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - Simulation supported design of LIGA Microsystems. Kämper, K.-P.; Döpper, J.; Ehrfeld, W.; Hagemann, B.; Hill, S.D.J.; Lehr, H.
JF  - Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey
Y1  - 1995
SN  - 1-85312-390-0
SP  - 3
EP  - 10
PB  - Computational Mechanics Publ.
CY  - Southampton [u.a.]
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels
JF  - Applied surface science
N2  - The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.
Y1  - 2010
U6  - http://dx.doi.org/10.1016/j.apsusc.2010.08.042
SN  - 0169-4332 (E-Journal); 0169-4332 (Print)
VL  - 257
IS  - 5
SP  - 1401
EP  - 1406
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Mathar, W.
A1  - Plum, H.-D.
T1  - SFM-System Stereolithographie und selektives Lasersintern im Vergleich
Y1  - 1994
N1  - Konferenz-Einzelbericht : Solid freeform manufacturing/Intelligente Produktionssysteme,  Internationale Konferenz, Dresden, DE, 29.-30.9.1994
SP  - 85
EP  - 95
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Berg, U.
A1  - Begemann, M.
A1  - Hagemann, B. (u.a.)
T1  - Series production and testing of a micro motor. Serienfertigung und Prüfung eines Mikromotors
JF  - Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...
Y1  - 1998
SN  - 3-933339-00-6
N1  - Konferenz-Einzelbericht: ACTUATOR, Internat. Conf. on New Actuators
SP  - 552
EP  - 555
PB  - Messe Bremen
CY  - Bremen
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Mathar, W.
A1  - Plum, H-D.
A1  - Wolf, M.
T1  - Serienqualität und -stückzahlen durch Abformprozesse
Y1  - 1996
N1  - Konferenz-Einzelbericht : Produkt- und Prozeßentwicklung mit neuen Technologien, Intelligente  Produktionssysteme - Solid Freeform Manufacturing, 4. Anwendertagung,  Dresden, DE, 25.-26.09.1996
SP  - 147
EP  - 159
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Drews, P.
T1  - Sensorik für das Schutzgasschweißen mit Robotern
JF  - DVS-Berichte. 143 (1992)
Y1  - 1992
SN  - 0418-9639
N1  - Konferenz-Einzelbericht
SP  - 62
EP  - 66
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Drews, P.
T1  - Sensoren in der Schweisstechnik
JF  - Die Umschau. 84 (1985), H. 5
Y1  - 1985
SN  - 0041-6347
SP  - 296
EP  - 300
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Beckmann, L.-H.
A1  - Rogos, J.
A1  - Schmall, K-H. (u.a.)
T1  - Sensoren in der automatisierten Schweisstechnik
Y1  - 1987
N1  - Konferenz-Einzelbericht: Schweissen mit Robotern. Vortragsband zum Aachener Kolloquium, Schweissen mit Robotern, Aachen, 30.03.1987-31.03.1987
SP  - 61
EP  - 147
ER  - 
TY  - JOUR
A1  - Starke, Günther
T1  - Sensoren fuer Schutzgasschweissroboter: Problemstellung, Funktionsweise, Handhabung und Programmierung von praxiserprobten Systemen
Y1  - 1986
N1  - Konferenz-Einzelbericht : Kommtech '86. 3. Int. Kongressmesse fuer Technischr Automation. ONLINE Ges., Essen, D, 13.-16.5.1986
SP  - 1
EP  - 22
ER  - 
TY  - JOUR
A1  - Rieper, Harald
A1  - Gebhardt, Andreas
A1  - Stucker, Brent
T1  - Selective Laser Melting of the Eutectic Silver-Copper Alloy Ag 28 wt % Cu
JF  - RTejournal - Forum für Rapid Technologie
N2  - The aim of this work was to perform a detailed investigation of the use of Selective Laser Melting (SLM) technology to process eutectic silver-copper alloy Ag 28 wt. % Cu (also called AgCu28). The processing occurred with a Realizer SLM 50 desktop machine. The powder analysis (SEM-topography, EDX, particle distribution) was reported as well as the absorption rates for the near-infrared (NIR) spectrum. Microscope imaging showed the surface topography of the manufactured parts. Furthermore, microsections were conducted for the analysis of porosity. The Design of Experiments approach used the response surface method in order to model the statistical relationship between laser power, spot distance and pulse time.
KW  - SLM
KW  - Response Surface Method
KW  - Porositat
KW  - Eutectic Silver Copper alloy
KW  - Additive Manufacturing
Y1  - 2016
U6  - http://nbn-resolving.de/urn/resolver.pl?nbn:de:0009-2-44141
SN  - 1614-0923
VL  - 13
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Selective Laser Melting of Soda-Lime Glass Powder
JF  - International Journal of Applied Ceramic Technology
Y1  - 2015
U6  - http://dx.doi.org/10.1111/ijac.12338
SN  - 1744-7402
VL  - 12
IS  - 1
SP  - 53
EP  - 61
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Hötter, Jan-Steffen
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Selective laser melting of metals: desktop machines open up new chances even for small companies
JF  - Advanced materials research
N2  - Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.
Y1  - 2012
U6  - http://dx.doi.org/10.4028/www.scientific.net/AMR.622-623.461
SN  - 1662-8985 (E-Journal); 1022-6680 (Print)
VL  - 622-623
SP  - 461
EP  - 465
PB  - Trans Tech Publ.
CY  - Baech
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Dolls, S.
A1  - Brunberg, A.
T1  - Selbsteinstellverfahren für Temperiervorrichtungen mit Außenverrohrung / Dolls, S. ; Enning, M. ; Brunberg, A. ; Abel, D.
JF  - Automation 2009 : Automatisierungskongress in Deutschland ; Kongress Baden-Baden, 16. und 17. Juni 2009 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik
Y1  - 2009
SN  - 978-3-18-092067-2
N1  - Automatisierungskongress <2009, Baden-Baden> ; VDI-Berichte ; 2067
SP  - 429
EP  - 432
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Benner, Joachim
T1  - Schwingungsbelastung von drehzahlgeregelten Antrieben mit Stromrichtermotoren
JF  - Antriebstechnik : Konstruktion, Entwicklung und Anwendung von Antrieben und Steuerungen ; Organ der Forschungsvereinigung Antriebstechnik e.V.
Y1  - 1989
SN  - 0341-2652
VL  - 28
IS  - 12
SP  - 49
EP  - 54
PB  - Vereinigte Fachverl.
CY  - Mainz
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Strunz, U.
A1  - Spieß, C.
T1  - Schweißprozeßparameteroptimierung mit Fuzzy-Logik
JF  - Schweißen und Schneiden. 47 (1995), H. 6
Y1  - 1995
SN  - 0036-7184
SP  - 494
EP  - 503
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Guntermann, P.
A1  - Häming, L.
T1  - Schweißen mit dem Nd:YAG-Laser
JF  - Der Praktiker, Schweißen und Schneiden. 49 (1997), H. 4
Y1  - 1997
SN  - 0554-9965
SP  - 170
EP  - 172
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Schnell und flexibel zur Kleinserie. Effizienzsteigerung bei der Realisierung von Komponenten und Teilsystemen
JF  - Ingenieur-Werkstoffe. 8 (1999), H. 3
Y1  - 1999
SN  - 0935-5715
SP  - 8
EP  - 14
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - Schlaue Produktion von smarten Autos : hinter der Smart-Produktion steckt ein innovatives Logistikkonzept
JF  - Technica
Y1  - 1999
SN  - 0040-866X
VL  - Bd. 48
IS  - H. 4
SP  - 20
EP  - 23
ER  - 
TY  - JOUR
A1  - Babilon, Katharina
A1  - Wilbring, Daniela
A1  - Tappert, Tim
A1  - Pfaff, Raphael
A1  - Enning, Manfred
T1  - Schienenfahrzeugtechnik hands on – FH Aachen IMechE Railway Challenge
JF  - Ingenieurspiegel
Y1  - 2018
SN  - 1868-5919
IS  - 2
SP  - 20
EP  - 22
PB  - Public Verlag
CY  - Bingen
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Ahlbehrendt, Norbert
A1  - Bischoff, Rainer
A1  - Melzer, Harald
A1  - Sieber, Sven
A1  - Senk, Burkhard
A1  - Kramarczyk, Peter
T1  - RoboTOOL. Technologien für den ortsflexiblen Einsatz von Robotern bei temporären Arbeitsaufgaben in der Fertigung
JF  - wt Werkstattstechnik online
Y1  - 2009
SN  - 1436-4980
VL  - Bd. 99
IS  - H. 9
SP  - 661
EP  - 670
ER  - 
TY  - JOUR
A1  - Michaux, F.
A1  - Mattern, P.
A1  - Kallweit, Stephan
T1  - RoboPIV: how robotics enable PIV on a large industrial scale
JF  - Measurement Science and Technology
N2  - This work demonstrates how the interaction between particle image velocimetry (PIV) and robotics can massively increase measurement efficiency. The interdisciplinary approach is shown using the complex example of an automated, large scale, industrial environment: a typical automotive wind tunnel application. Both the high degree of flexibility in choosing the measurement region and the complete automation of stereo PIV measurements are presented. The setup consists of a combination of three robots, individually used as a 6D traversing unit for the laser illumination system as well as for each of the two cameras. Synchronised movements in the same reference frame are realised through a master-slave setup with a single interface to the user. By integrating the interface into the standard wind tunnel management system, a single measurement plane or a predefined sequence of several planes can be requested through a single trigger event, providing the resulting vector fields within minutes.

In this paper, a brief overview on the demands of large scale industrial PIV and the existing solutions is given. Afterwards, the concept of RoboPIV is introduced as a new approach. In a first step, the usability of a selection of commercially available robot arms is analysed. The challenges of pose uncertainty and importance of absolute accuracy are demonstrated through comparative measurements, explaining the individual pros and cons of the analysed systems. Subsequently, the advantage of integrating RoboPIV directly into the existing wind tunnel management system is shown on basis of a typical measurement sequence. In a final step, a practical measurement procedure, including post-processing, is given by using real data and results. Ultimately, the benefits of high automation are demonstrated, leading to a drastic reduction in necessary measurement time compared to non-automated systems, thus massively increasing the efficiency of PIV measurements.
Y1  - 2018
U6  - http://dx.doi.org/10.1088/1361-6501/aab5c1
SN  - 1361-6501
N1  - Special Section on the 12th International Symposium on Particle Image Velocimetry (PIV 2017)
VL  - 29
IS  - 7
SP  - 074009
PB  - IOP
CY  - Bristol
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Pappas, D. P.
A1  - Hopster, H.
T1  - Reversible transition between perpendicular and in-plane magnetization in ultrathin films. Pappas, D. P.; Kämper, K.-P.; Hopster, H.
JF  - Physical Review Letters. 64 (1990), H. 26
Y1  - 1990
SN  - 1079-7114
SP  - 3179
EP  - 3182
ER  - 
TY  - JOUR
A1  - Willms, Herbert
A1  - Beer, Stefan
A1  - Fröhlke, K.
A1  - Haidn, O.J.
A1  - [u.a.], 
T1  - Regelung eines Wasserstoff-/Sauerstoff-Dampferzeugers mit Hilfe eines modifizierten Zirkondioxid-Sensors
Y1  - 1993
N1  - Report: Deutsche Forschungsanstalt für Luft- und Raumfahrt, EN-CA/E (1993) Seite 1-17 (17 Seiten, 14 Bilder, 2 Tabellen, 14 Quellen)
ER  - 
TY  - JOUR
A1  - Willms, Herbert
T1  - Regelung eines H2/O2-Dampferzeugers mit Hilfe eines modifizierten Zirkondioxid-Sensors
JF  - Chemie Ingenieur Technik
Y1  - 1993
SN  - 0009-286X
VL  - 65
IS  - 8
SP  - 954
EP  - 956
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Willms, Herbert
A1  - Beer, Stefan
T1  - Regelung eines H(IND 2)/O(IND 2)-Dampferzeugers
Y1  - 1992
SN  - 0939-2963
N1  - Report: Regelung eines H(IND 2)/O(IND 2)-Dampferzeugers, Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Hardthausen am Kocher (DE). Inst. fuer Chemische Antriebe und Verfahrenstechnik, Sep 1992, (116 S. Gesamtumfang)
ER  - 
TY  - JOUR
A1  - Baatz, Udo
A1  - Butz, Hans-Werner
T1  - Rechnerunterstuetztes Konstruieren mit Symbolen
JF  - TZ für praktische Metallbearbeitung
Y1  - 1972
SN  - 0177-8900
VL  - 66
IS  - 9
SP  - 366
EP  - 370
PB  - Grossmann
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Heinrichs, Horst
A1  - Weck, M.
A1  - Heimann, A.
T1  - Rechnerunterstuetzte Aufbereitung von Finite-Elemente-Rechenmodellen-Erfassung der Bauteilgeometrie
JF  - Industrieanzeiger. 99 (1977), H. 78
Y1  - 1977
SP  - 1509
EP  - 1512
ER  - 
TY  - JOUR
A1  - Heinrichs, Horst
A1  - Weck, M.
T1  - Rechnerunterstuetzte Aufbereitung von Finite-Elemente-Rechenmodellen -Erstellen der FEM-Netzwerke
JF  - Industrieanzeiger. 99 (1977), H. 102
Y1  - 1977
SP  - 2059
EP  - 2061
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Kremer-Wasmuth, S.
T1  - Rechnergestützte Prozeßkontrolle und -dokumentation zur Qualitätsüberwachung beim Schweißen
JF  - Qualitätsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999)
Y1  - 1999
SN  - 0418-9639
N1  - Report
SP  - 49
EP  - 52
ER  - 
TY  - JOUR
A1  - Leidinger, Rafael
A1  - Noisten, Thomas
A1  - Wollert, Jörg
T1  - Realtime automation networks in moVing industrial environments
JF  - Journal of systemics, cybernetics and informatics
N2  - The radio-based wireless data communication has made the realization of new technical solutions possible in many fields of the automation technology (AT). For about ten years, a constant disproportionate growth of wireless technologies can be observed in the automation technology.
However, it shows that especially for the AT, conventional technologies of office automation are unsuitable and/or not manageable. The employment of mobile services in the industrial automation technology has the potential of significant cost and time savings. This leads to an increased productivity in various fields of the AT, for example in the factory and process automation or in production logistics. In this paper technologies and solutions for an automation-suited supply of mobile wireless services will be introduced under the criteria of real time suitability, IT-security and service orientation.
Emphasis will be put on the investigation and development of wireless convergence layers for different radio technologies, on the central provision of support services for an easy-to-use, central, backup enabled management of combined wired / wireless networks and on the study on integrability in a Profinet real-time Ethernet network.
KW  - PROFINET
KW  - Distributed Control Systems,
KW  - Industrial Automation Technology,
KW  - 802.15.4
KW  - Bluetooth
KW  - Wireless Networks
Y1  - 2012
SN  - 1690-4532
VL  - Vol. 10
IS  - Iss. 2
SP  - 52
EP  - 56
PB  - IIIC
CY  - Orlando
ER  - 
TY  - JOUR
A1  - Grundmann, Reinhard
T1  - Raumlufttechnik, Lüftungstechnik, Klimatechnik, Lärm
JF  - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 55 (2004), H. 12
Y1  - 2004
SN  - 0017-9906
SP  - 46
EP  - 49
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Rapid Tooling. Der schnelle Weg zum Spritzgießwerkzeug.
JF  - Kunststoffe, München. 88 (1998), H. 11
Y1  - 1998
SN  - 0023-5563
SP  - 1992
EP  - 2000
ER  -