TY  - CHAP
A1  - Blaß, Hans Joachim
A1  - Uibel, Thomas
ED  - Moosbrugger, Thomas
T1  - Forschung an der Universität Karlsruhe - Stiftförmige Verbindungsmittel in Brettsperrholz
T2  - Brettsperrholz : ein Blick auf Forschung und Entwicklung ; 5. Grazer Holzbau-Fachtagung ; 5. GraHFT' 06; Tagungsband ; Graz, am 29. September 2006 / Institut für Holzbau und Holztechnologie ... [Tagungsband: Thomas Moosbrugger ...]
Y1  - 2006
SN  - 3-902020-32-6
N1  - Grazer Holzbau-Fachtagung ; (5 ; 2006.09.29 ; Graz); Institut für Holzbau und Holztechnologie
SP  - I-6
EP  - I-16
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-10.3.3
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Ballmann, Josef
A1  - Dafnis, Athanasios
A1  - Braun, Carsten
A1  - Korsch, Helge
A1  - Reimerdes, Hans-Günther
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - The HIRENASD project: High Reynolds number aerostructural dynamics experiments in the European Transonic Wind Tunnel (ETW)
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-5.11.2
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Korsch, Helge
A1  - Dafnis, Athanasios
A1  - Reimerdes, Hans-Günther
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Dynamic qualification of the HIRENASD elastic wing model
T2  - Motto: Luft- und Raumfahrt: Lehre, Forschung, Industrie - gemeinsam innovativ. Deutscher Luft- und Raumfahrtkongress 2006 : Braunschweig, 06. bis 09. November 2006. Jahrbuch / Deutsche Gesellschaft für Luft- und Raumfahrt. 2006
Y1  - 2006
SP  - 1441
EP  - 1450
PB  - Dt. Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth (DGLR)
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Müller, Karsten
A1  - Fischer, Benedikt
A1  - Lehmann, Thomas
T1  - Einsatzmöglichkeiten von Bilderkennungsverfahren zur Zustandserfassung von Kanalisationen
T2  - 7. Kölner Kanal Kolloquium : 06. und 07. September 2006 im Maternushaus, Köln / hrsg. von J. Pinnekamp. Aachener Schriften zur Stadtentwässerung. Bd. 9
Y1  - 2006
SN  - 3-938996-02-1
SP  - 16/1
EP  - 16/18
PB  - Ges. zur Förderung der Siedlungswasserwirtschaft an der RWTH Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Pinnekamp, Johannes
A1  - Müller, Karsten
T1  - Kanalisation und Gewässerschutz
T2  - 7. Kölner Kanal Kolloquium : 06. und 07. September 2006 im Maternushaus, Köln / hrsg. von Johannes Pinnekamp. Aachener Schriften zur Stadtentwässerung. Bd. 9
Y1  - 2006
SN  - 3-938996-02-1
SP  - 1/1
EP  - 1/16
PB  - Ges. zur Förderung der Siedlungswasserwirtschaft an der RWTH Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Schwarzer, Klemens
T1  - Solarthermisches Entsalzungssystem mit Wärmerückgewinnung - Erste Feldtestergebnisse
T2  - 16. Symposium Thermische Solarenergie : 17. bis 19. Mai 2006, Kloster Banz, Bad Staffelstein
Y1  - 2006
SN  - 3-934681-45-X
SP  - 173
EP  - 178
PB  - Ostbayer. Technologie-Transfer-Inst.
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Raupach, Michael
A1  - Orlowsky, Jeannette
A1  - Büttner, T.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Hegger, Josef
T1  - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 77
EP  - 88
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Pak, Daniel
A1  - Piegeler, D.
A1  - Feldmann, Markus
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
ED  - Hegger, Josef
T1  - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 181
EP  - 190
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Barroso de Aguiar, Jose
ED  - Jalali, Said
ED  - Camoes, Aires
ED  - Ferrera, Rui Miguel
T1  - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles
T2  - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal
Y1  - 2006
SN  - 972-99179-1-4
SP  - 185
EP  - 192
PB  - Universidade do Minho, Departamento de Engenharia Civil
CY  - Guimarães
ER  - 
TY  - CHAP
A1  - Fend, Thomas
A1  - Hoffschmidt, Bernhard
A1  - Reutter, Oliver
A1  - Sauerhering, Jörg
A1  - Pitz-Paal, Robert
T1  - Gas flow in hot porous materials: the solar air receiver and spin-off applications
T2  - Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland
Y1  - 2006
SN  - 0-7918-4760-8
SP  - 507
EP  - 514
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Hoffschmidt, Bernhard
A1  - Schwarzer, Klemens
A1  - Späte, Frank
A1  - Kötter, Jens
A1  - Ebert, Miriam
A1  - Sierck, Olaf
T1  - Development of a small modular parabolic trough collector
T2  - 13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain
Y1  - 2006
SN  - 8478345191
PB  - SolarPaces
CY  - [o.O.]
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Möller, M.
A1  - Weichhold, O.
ED  - Hegger, Josef
T1  - Application of polymers in textile reinforced concrete : from the interface to construction elements
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 55
EP  - 64
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Böhm, Stefan
A1  - Dilger, Klaus
T1  - Implementation of a velocity controlled manual applicator for adhesives and sealants in the automotive industry in consideration of quality control
T2  - Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida
Y1  - 2006
SN  - 1086-9506
SP  - 68
EP  - 70
PB  - Adhesion Society
CY  - Blacksburg, Va.
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Böhm, Stefan
A1  - Dilger, Klaus
A1  - Welters, T.
T1  - Neue Möglichkeiten der Klebstoffverarbeitung durch geschwindigkeitsproportionalen Handauftrag
T2  - Adhesive bonding and hybrid bonding in body-in-white shop and assembly : proceedings, 25/26 April 2006, Bad Nauheim/Frankfurt
Y1  - 2006
SP  - 81
PB  - Technik & Kommunikation Verl.-GmbH
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Böhm, Stefan
A1  - Dilger, Klaus
T1  - Progress of the manual application of adhesives
T2  - Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China
Y1  - 2006
SP  - 275
EP  - 277
PB  - Beijing Adhesion Society of China
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Böhm, Stefan
A1  - Hellmanns, Mark
A1  - Backes, Andreas
A1  - Dilger, Klaus
T1  - Lock-in thermography based NDT of automotive parts
T2  - Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China
Y1  - 2006
SP  - 382
EP  - 384
PB  - Beijing Adhesion Society of China
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
A1  - Schiffer, Stefan
T1  - AllemaniACs@ home 2006 team description
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Augenstein, Eckardt
A1  - Herbergs, S.
A1  - Kuperjans, Isabel
T1  - Planung und Bewertung der Gebäudeenergieversorgung mit TOP-Energy
T2  - Heizungs- und Raumlufttechnik : 1. Fachtagung Leonberg, 31. Januar bis 1. Februar 2006. - (VDI-Berichte ; Nr. 1921)
Y1  - 2006
SN  - 3-18-091921-3
N1  - Posterbeitrag
SP  - 57
EP  - 60
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Pauksztat, Anja
A1  - Kuperjans, Isabel
A1  - de Hesselle, M.
T1  - Referenzformeln für Energiebedarf und CO2-Emissionen in der Glasindustrie
T2  - Energieeffizienz - Chancen für die Zukunft : Tagung Berlin, 14. und 15. November 2006. - (VDI-Berichte ; 1951)
Y1  - 2006
SN  - 3-18-091951-5
SP  - 179
EP  - 190
PB  - VDI-Verl.
CY  - Düsseldorf
ET  - Nichtred. Ms.-Dr.
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Vinsonneau, B.
A1  - Burnham, K. J.
T1  - Multiple models for nonlinear systems
T2  - Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]
Y1  - 2006
SN  - 1-84600-013-0
SP  - 347
EP  - 352
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Poghossian, Arshak
A1  - Platen, J.
A1  - Yoshinobu, T.
A1  - Koudelka-Hep, M.
A1  - Schöning, Michael Josef
T1  - Multi-parameter sensing of both physical and (bio-)chemical quantities using the same transducer principle
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 172
EP  - 181
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Schubert, J.
A1  - Ermelenko, Y.
A1  - Vlasov, Y. G.
A1  - Bratov, A.
A1  - Schöning, Michael Josef
T1  - Thin-film sensors with chalcogenide glass materials – a general survey
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 92
EP  - 97
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abouzar, Maryam H.
A1  - Wagner, Torsten
A1  - Näther, Niko
A1  - Rolka, David
A1  - Yoshinobu, Tatsuo
A1  - Kloock, Joachim P.
A1  - Turek, Monika
A1  - Ingebrandt, Sven
A1  - Poghossian, Arshak
T1  - A semiconductor-based field-effect platform for (bio-)chemical and physical sensors: From capacitive EIS sensors and LAPS over ISFETs to nano-scale devices
T2  - MRS Proceedings
Y1  - 2006
U6  - http://dx.doi.org/10.1557/PROC-0952-F08-02
N1  - Vol. 952 - Symposium F - Integrated Nanosensors
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abouzar, Maryam H.
A1  - Han, Y.
A1  - Ingebrandt, S.
A1  - Offenhäusser, A.
A1  - Poghossian, Arshak
T1  - Markierungsfreie DNA-Detektion mit Silizium-Feldeffektsensoren – Messeffekte oder Artefakte?
T2  - Sensoren und Mess-Systeme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau
Y1  - 2006
SN  - 3-8007-2939-3
SP  - 443
EP  - 446
PB  - VDE Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Platen, J.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Präparation von selbstjustierenden Nanostrukturen mittels Schichtausdehnungstechnik
T2  - Sensoren und Mess-Systeme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau
Y1  - 2006
SN  - 3-8007-2939-3
SP  - 277
EP  - 280
PB  - VDE Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Otto, R.
A1  - Rao, C.
A1  - Molina, R.
A1  - Schöning, Michael Josef
T1  - Licht-adressierbare potentiometrische Sensorsysteme – Konzepte und Anwendungen
T2  - Sensoren und Mess-Systeme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau
Y1  - 2006
SN  - 3-8007-2939-3
SP  - 165
EP  - 168
PB  - VDE Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Langzeitstatistische Untersuchungen zur Qualität von Funkkanälen für das industrielle Umfeld
T2  - Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund ( Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)
Y1  - 2006
SN  - 3-18-377210-8
SP  - 165
EP  - 176
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Grundlagen Wireless - Was kann von Funktechnik erwartet werden?
T2  - Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund / Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)
Y1  - 2006
SN  - 3-18-377210-8
SP  - 314
EP  - 323
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Moreno, Lia
A1  - Dosev, D.
A1  - Bratov, A.
A1  - Dominguez, C.
A1  - Schöning, Michael Josef
A1  - Kloock, Joachim P.
T1  - Effect of electrical properties of the surrounding medium on the response of an interdigitated electrode array with chalcogenide glass film
T2  - XX Eurosensors : 20th anniversary ; Göteborg, Sweden, 17 - 20 September 2006 ; [proceedings]. - Vol. 1
Y1  - 2006
SN  - 978-91-631-9280-7
N1  - Paper number: T1A-P22
SP  - 384
EP  - 385
CY  - Göteborg
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
A1  - Buda, A.
A1  - Altrock, R.
T1  - The capability of bluetooth for real-time transmission in automation
T2  - Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand
Y1  - 2006
SP  - 168
EP  - 175
PB  - Acta Pr.
CY  - Anaheim, Calif.
ER  - 
TY  - CHAP
A1  - Vedral, A.
A1  - Wollert, Jörg
T1  - Analysis of error and time behavior of the IEEE 802.15.4 PHY-layer in an industrial environment
T2  - Proceedings / 2006 IEEE International Workshop on Factory Communication Systems : June 28th - 30th, 2006
Y1  - 2006
SN  - 1-4244-0379-0
SP  - 119
EP  - 124
PB  - IEEE Operations Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Vredal, Andreas
A1  - Wollert, Jörg
T1  - Praktische Untersuchungen zur Reduzierung der Restfehlerrate von Funksystemen
T2  - Wireless Automation : Chancen, Lösungen, Risiken ; Tagung Darmstadt, 8. und 9. Mai 2006. (VDI-Berichte ; 1939)
Y1  - 2006
SN  - 3-18-091939-6
SP  - 135
EP  - 146
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
T1  - Die Analyse industrieller funkgestützter Kommunikationskanäle
T2  - Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse & Kongress, 28. - 30. Nov. 2006, Nürnberg
Y1  - 2006
SN  - 9783800729944
SP  - 279
EP  - 288
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
T1  - Praktische Untersuchungen zum zeitlichen Übertragungs- und Bündelfehlerverhalten der IEEE 802.15.4
T2  - ZigBee & Co. - drahtlose Nahbereichsnetzwerke : 04. April 2006, München
Y1  - 2006
PB  - Design&Elektronik
CY  - Poing
ER  - 
TY  - CHAP
A1  - Herrmann, Ulf
A1  - Worringer, S.
A1  - Graeter, F.
A1  - Nava, P.
ED  - Romero, Manuel
T1  - Three Years of Operation Experience of the SKAL-ET Collector Loop at SEGS V
T2  - 13th International Symposium Concentrated Solar Power and Chemical Energy Technologies, June 20 - 23, 2006, Seville, Spain
Y1  - 2006
SN  - 84-7834-519-1
PB  - SolarPACES [u.a.]
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Pietsch, Wolfram
A1  - Herzwurm, Georg
A1  - Zander, Dietmar
T1  - Assuring quality of QFD-education in Germany
T2  - ISQFD'06: 12th International Symposium on QFD : Tokyo, 07.-09.2006
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Ingebrandt, S.
A1  - Platen, J.
A1  - Schöning, Michael Josef
T1  - Field-effect sensors with charged macromolecules – from micro towards nano aspects
T2  - Biochemical Sensing Utilisation of Micro-and                       Nanotechnologies, Warschau, Nov. 2005 : Lecture Notes of the                       ICB Seminar / ed.: M. Mascini, W. Torbicz
Y1  - 2006
SP  - 74
EP  - 81
PB  - Polish Academy Sciences Press
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Baudynamische Untersuchung von Brückenbauwerken im Kölner Raum
T2  - Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941)
Y1  - 2006
SN  - 3-18-091941-8
SP  - 121
EP  - 140
PB  - VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Mistler, Michael
A1  - Butenweg, Christoph
T1  - Mauerwerksbauten unter Erdbebenbelastung
T2  - Numerische Methoden zur Problemlösung im konstruktiven Bauwesen : 34. Aachener Baustofftag ; 02. Februar 2006
Y1  - 2006
PB  - IBAC
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Kob, Malte
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Niendorf, Thoralf
T1  - Training of a combined model of larynx and vocal folds with data from MRI measurements
T2  - The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings
Y1  - 2006
SP  - 45
EP  - 46
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic resistance of unreinforced masonry buildings
T2  - Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...
Y1  - 2006
SN  - 1-905088-06-X
U6  - http://dx.doi.org/10.4203/ccp.83.9
SP  - Paper 9
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Deterding, A.
A1  - Tippkötter, Nils
A1  - Ulber, R.
ED  - Beckmann, Dieter
T1  - Online-Essigsäureanalytik in Fermentationsbrühen mittels Fließdiffusionstechnik (FDT)
T2  - Technische Systeme für Biotechnologie und Umwelt : 13. Heiligenstädter Kolloquium, Heilbad Heiligenstadt, 25.09. - 27.09.2006
Y1  - 2006
SN  - 978-3-00-018621-9
SP  - 273
EP  - 280
CY  - Heiligenstadt
ER  - 
TY  - CHAP
A1  - Schuh, G.
A1  - Gottschalk, S.
A1  - Höhne, Tim
A1  - Cloots, M.
ED  - Wenzel, Sigrid
T1  - Parametrierung einer Schlupfregelung in der simulativen Produktionsplanung
T2  - Simulation in Produktion und Logistik 2006 : Tagungsband zur 12. Fachtagung, Kassel, 26. - 27. September 2006
Y1  - 2006
SN  - 3-936150-48-6
N1  - ASIM-Mitteilung ; 104
SP  - 233
EP  - 243
ER  - 
TY  - CHAP
A1  - Drumm, Christian
A1  - Lemcke, Jens
A1  - Oberle, Daniel
T1  - Integrating Semantic Web Services and Business Process Management: A Real Use Case
T2  - Proceedings of the ESWC 2006 Workshop Semantics for Business Process Management 2006 (SBPM 2006), June 2006
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Loeb, Horst W.
A1  - Schartner, Karl-Heinz
A1  - Seboldt, Wolfgang
A1  - Dachwald, Bernd
A1  - Streppel, Joern
A1  - Meusemann, Hans
A1  - Schülke, Peter
T1  - SEP for a lander mission to the jovian moon europa
T2  - 57th International Astronautical Congress
N2  - Under DLR-contract, Giessen University and DLR Cologne are studying solar-electric propulsion missions (SEP) to the outer regions of the solar system. The most challenging reference mission concerns the transport of a 1.35-tons chemical lander spacecraft into an 80-RJ circular orbit around Jupiter, which would enable to place a 375 kg lander with 50 kg of scientific instruments on the surface of the icy moon "Europa". Thorough analyses show that the best solution in terms of SEP launch mass times thrusting time would be a two-stage EP module and a triple-junction solar array with concentrators which would be deployed step by step. Mission performance optimizations suggest to propel the spacecraft in the first EP stage by 6 gridded ion thrusters, running at 4.0 kV of beam voltage, which would save launch mass, and in the second stage by 4 thrusters with 1.25 to 1.5 kV of positive high voltage saving thrusting time. In this way, the launch mass of the spacecraft would be kept within 5.3 tons. Without a launcher's C3 and interplanetary gravity assists, Jupiter might be reached within about 4 yrs. The spiraling-down into the parking orbit would need another 1.8 yrs. This "large mission" can be scaled down to a smaller one, e.g., by halving all masses, the solar array power, and the number of thrusters. Due to their reliability, long lifetime and easy control, RIT-22 engines have been chosen for mission analysis. Based on precise tests, the thruster performance has been modeled.
Y1  - 2006
U6  - http://dx.doi.org/10.2514/6.IAC-06-C4.4.04
N1  - 57th International Astronautical Congress, 02 October 2006 - 06 October 2006, Valencia, Spain.
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Kahle, Ralph
A1  - Wie, Bong
T1  - Solar sail Kinetic Energy Impactor (KEI) mission design tradeoffs for impacting and deflecting asteroid 99942 Apophis
T2  - AIAA/AAS Astrodynamics Specialist Conference and Exhibit
N2  - Near-Earth asteroid 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several so-called gravitational keyholes during its 2029-encounter. Several pre-2029-deflection scenarios to prevent Apophis from doing this have been investigated so far. Because the keyholes are less than 1 km in size, a pre-2029 kinetic impact is clearly the best option because it requires only a small change in Apophis' orbit to nudge it out of a keyhole. A single solar sail Kinetic Energy Impactor (KEI) spacecraft that impacts Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages at about 0.75 AU would be a feasible option to do this. The spacecraft consists of a 160 m x 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. In this paper, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, solar sail Kinetic Energy Impactor (KEI) spacecraft are still a feasible option to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value. In this paper, we elaborate potential pre- and post-2029 KEI impact scenarios for a launch in 2020, and investigate tradeoffs between different mission parameters.
KW  - Solar Sail
KW  - Asteroid Deflection
KW  - Planetary Protection
KW  - Trajectory Optimization
Y1  - 2006
U6  - http://dx.doi.org/10.2514/6.2006-6178
N1  - AIAA/AAS Astrodynamics Specialist Conference and Exhibit, 21 August 2006 - 24 August 2006, Keystone, Colorado(USA).
SP  - 1
EP  - 20
ER  - 
TY  - CHAP
A1  - Huth, Thomas
A1  - Elsen, Olaf
A1  - Hartwig, Christoph
A1  - Esch, Thomas
T1  - Innovative modular valve trains for 2015 - logistic benefits by EMVT
T2  - IFAC Proceedings Volumes, Volume 39, Issue 3
N2  - In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary.
Y1  - 2006
U6  - http://dx.doi.org/10.3182/20060517-3-FR-2903.00172
N1  - Part of special issue "12th IFAC Symposium on Information Control Problems in Manufacturing"
SP  - 315
EP  - 320
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
ED  - König-Ries, Brigitta
T1  - Die benutzerzentrierte Entwicklung mobiler Unternehmenssoftware
T2  - MMS 2007: Mobilität und mobile Informationssysteme : 2nd conference of GI-Fachgruppe MMS ; March 6th, 2007 in Aachen, Germany
Y1  - 2007
SN  - 978-3-88579-198-0
SP  - 23
EP  - 35
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - Bartelt, Perry
A1  - McElwaine, J.
T1  - Two-phase debris flow modeling
T2  - Geophysical Research Abstracts
Y1  - 2007
N1  - A-08119
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - Edge Joints with Dowel Type Fasteners in Cross Laminated Timber
T2  - Proceedings. CIB-W18 Meeting 2007, Bled, Slovenia 2007
Y1  - 2007
SN  - 0945-6996
N1  - Paper 40-7-2
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Ringbeck, Thorsten
A1  - Hagebeuker, Bianca
ED  - Grün, Armin
T1  - A 3D time of flight camera of object detection
T2  - Optical 3-D measurement techniques VIII : applications in GIS, mapping, manufacturing, quality control, robotics, navigation, mobile mapping, medical imaging, cultural heritage, VR generation and animation; papers presented to the conference organized at ETH Zurich, Switzerland, July 9 - 12, 2007. - Vol. 1
Y1  - 2007
SN  - 3-906467-67-8 (Gesamtwerk)
N1  - Conference on Optical 3-D Measurement Techniques <8, 2007, Zürich>
SP  - 1
EP  - 16
PB  - ETH
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Hagebeuker, Bianca
A1  - Ringbeck, Thorsten
A1  - Frydlewicz, Paul
A1  - Jesorsky, Oliver
A1  - Sünkel, Thomas
ED  - Grote, Caspar
T1  - PMD-Sensoren als Schlüsselkomponenten für die mehrdimensionale Umfelderfassung des Fahrzeuginnenraums
T2  - Begleittexte zum Entwicklerforum KFZ-Elektronik & FlexRay Solution Day : 15.Mai 2007, Ludwigsburg
Y1  - 2007
N1  - Entwicklerforum Kfz-Elektronik <2007, Ludwigsburg> ; FlexRay Solution Day <2007, Ludwigsburg>
SP  - 287
EP  - 296
PB  - WEKA-Fachzeitschr.-Verl.
CY  - Poing
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Chen, B.-H.
A1  - Ballmann, Josef
T1  - Computational aeroelastic analysis and design of the HIRENASD wind tunnel wing model and tests
T2  - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics : June 18 - 21, 2007, Stockholm, Sweden
Y1  - 2007
PB  - KTH
CY  - Stockholm
ER  - 
TY  - CHAP
A1  - Wellmer, Georg
A1  - Chen, B.-H.
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Numerical prediction of aeroelastic effects on twin-sting-rig mounted models for rear fuselage and empennage flow investigation in transonic windtunnel
T2  - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics, June 18 - 21, 2007, Stockholm, Sweden
Y1  - 2007
PB  - KTH
CY  - Stockholm
ER  - 
TY  - CHAP
A1  - Stepkes, Hermann
A1  - Zimmermann, J.
A1  - Müller, Karsten
A1  - Siekmann, Marko
A1  - Pinnekamp, Josef
T1  - Economical rehabilitation of sewer systems by ground penetration radar investigations
T2  - Strategic asset management of water supply and wastewater infrastructures : invited papers from the 2nd IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October [17 - 19] 2007 / ed. by Helene Alegre and Maria do Céu Almeida
Y1  - 2007
SN  - 9781843391869
SP  - 501
EP  - 520
PB  - IWA Publ.
CY  - London
ER  - 
TY  - CHAP
A1  - Müller, Karsten
T1  - Strategien zur Zustandserfassung von Kanalisationen
T2  - Integration in der Abwasserentsorgung : Tagungsband Dresden, 04.10.2007 / Dresdner Kolloquium zur Siedlungswasserwirtschaft / Hrsg.: Peter Krebs. Dresdner Berichte. 29
Y1  - 2007
SP  - 39
EP  - 50
PB  - Inst. für Siedlungs- und Industriewasserwirtschaft
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Jacobs, Stephan
ED  - Bleek, Wolf-Gideon
T1  - Towards integration driven design : experience report
T2  - Software Engineering 2007 : Beiträge zu den Workshops ; Fachtagung des GI-Fachbereichs Softwaretechnik ; 27. - 30.03.2007 in Hamburg. - (GI-Edition : Proceedings ; 106)
Y1  - 2007
SN  - 978-3-88579-200-0
SP  - 143
EP  - 150
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
T1  - Fluid flow in porous ceramic multichannel crossflower filter modules
Y1  - 2007
PB  - COMSOL Inc.
CY  - Burlington, Mass.
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Chudoba, Rostislav
A1  - Konrad, Martin
ED  - Triantafillou, T. C.
T1  - Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics
T2  - Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007
Y1  - 2007
SN  - 9608969107
SP  - 456
EP  - 457
PB  - Univ.
CY  - Patras
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Hegger, Josef
A1  - Voss, Stefan
ED  - Reinhardt, Hans W.
T1  - Load-bearing behaviour of polymer-impregnated textiles in concrete
T2  - Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)
Y1  - 2007
SN  - 978-2-35158-046-2
SP  - 183
EP  - 192
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Kuhnhenne, Markus
A1  - Feldmann, Markus
A1  - Döring, Bernd
A1  - Spranger, Sascha
T1  - Luftdichtheit im Stahlleichtbau - Gebäudehüllen in Sandwichbauweise
T2  - Dichte Gebäudehülle, Thermografie und Wohnungslüftung : 2. Europäisches BlowerDoor-Symposium : 16.3. - 17.3. 2007, Kassel
Y1  - 2007
SP  - 121
EP  - 134
PB  - Energie + Umwelt-Zentrum
ER  - 
TY  - CHAP
A1  - Spasov, Yulian
A1  - Döring, Bernd
A1  - Griffin, Allan
T1  - Exploiting the thermal mass in an energy efficient building - a comparison exercise between IES Apache and TRNSYS models
T2  - Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings
Y1  - 2007
SN  - 978-952-99898-2-9
SP  - 1
EP  - 7
CY  - Helsinki
ER  - 
TY  - CHAP
A1  - Döring, Bernd
A1  - Feldmann, Markus
A1  - Kuhnhenne, Markus
T1  - An innovative thermally activated light-weight steel deck system - numerical investigations and practical tests
T2  - Clima 2007 WellBeing Indoors: 9th Rehva World Congress, 10-14 June 2007, Helsinki, Finland : proceedings
Y1  - 2007
SN  - 978-952-99898-2-9
SP  - 1
EP  - 8
CY  - Helsinki
ER  - 
TY  - CHAP
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Schnell, Michael
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schlereth, Armin
A1  - Rihacek, Christoph
T1  - Final assessment of the B-VHF overlay concept
T2  - IEEE Aerospace Conference : 3-10 March 2007, Big Sky, Mont.
Y1  - 2007
SN  - 1-4244-0525-4
SP  - 1
EP  - 18
ER  - 
TY  - CHAP
A1  - Sajatovic, Miodrag
A1  - Rihacek, Christoph
A1  - Haindl, Bernhard
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
T1  - Broadband VHF (B-VHF) project achievements and follow-on activities
T2  - Integrated Communications, Navigation and Surveillance Conference : Herndon, VA, 1 - 3 May 2007
Y1  - 2007
SN  - 1-4244-1216-1
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC a system for future broadband aeronautical multi-carrier communications in the L-BAND
T2  - IEEE/AIAA 26th Digital Avionics Systems Conference ; DASC '07 ; 21 - 25 Oct. 2007, Dallas, Texas
Y1  - 2007
SN  - 978-1-4244-1108-5
SP  - 4D2-1
EP  - 4D2-13
ER  - 
TY  - CHAP
A1  - Rokitansky, Carl-Herbert
A1  - Ehammer, Max
A1  - Gräupl, Thomas
A1  - Schnell, Michael
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Rihacek, Christoph
A1  - Sajatovic, Miodrag
T1  - B-AMC – Aeronautical Broadband Communication in the L-Band
T2  - First CEAS European Air and Space Conference : Motto: century perspectives : Deutscher Luft-und Raumfahrtkongress 2007 : 10-13 September 2007 in Berlin, Germany. (Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2007 ; Bd. 1-5. - Enth.: Jahrbuch der Deutschen Gesellschaft für Luft- und Raumfahrt 2006 ; Bd. 3)
Y1  - 2007
SN  - 0070-4083
SP  - 487
EP  - 496
PB  - Deutschen Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Pichler, Alexander
A1  - George, Alfred
A1  - Seiler, Friedrich
T1  - Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007
T2  - PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620
Y1  - 2007
SP  - 1
EP  - 10
PB  - ISL
CY  - Saint Louis, France
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Schöning, Michael Josef
T1  - Heavy metal detection with semiconductor devices based on PLD-prepared chalcogenide glass thin films
T2  - Armenian Journal of Physics
Y1  - 2007
SN  - 1829-1171
SP  - 95
EP  - 98
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Köllensperger, P.
A1  - De Doncker, R. W.
ED  - Dmowski, Antoni
T1  - Der Internally Commutated Thyristor (ICT) : ein neuartiger GCT mit integrierter Ausschalteinheit
T2  - "Nowoczesne urządzenia zasilające w energetyce" : X międzynarodowa konferencja naukowo techniczna, Zakopane, 14-16 marca 2007 r. : materiały konferencyjne
Y1  - 2007
SN  - 83-918709-7-9
SP  - 7.1
EP  - 7.9
PB  - APS Energia
CY  - Warszawa
ER  - 
TY  - CHAP
A1  - Köllensperger, P.
A1  - Bragard, Michael
A1  - Plum, T.
A1  - De Doncker, R. W.
T1  - The dual GCT : a new high-power device using optimized GCT technology
T2  - Conference record of the 2007 IEEE Industry Applications Conference : 42. IAS annual meeting ; September 23 - 27, 2007, New Orleans, Louisiana, USA
Y1  - 2007
SN  - 978-1-4244-1260-0 (Online)
SN  - 978-1-4244-1259-4 (Print)
U6  - http://dx.doi.org/10.1109/07IAS.2007.76
SP  - 358
EP  - 365
PB  - IEEE Operations Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Mobility - Integration von Offboard-Devices in Fahrzeugen
T2  - Begleittexte zum Entwicklerforum Kfz-Elektronik & FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...
Y1  - 2007
SP  - 47
EP  - 54
PB  - Design & Elektronik
CY  - Poing
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Fahrzeug-Umwelt Kommunikation? Chancen und Herausforderungen
T2  - Begleittexte zum Entwicklerforum Kfz-Elektronik & FlexRay Solution Day : 15. Mai 2007, Ludwigsburg / hrsg. von Caspar Grote ...
Y1  - 2007
SP  - 39
EP  - 46
PB  - Design & Elektronik
CY  - Poing
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Kruse, Thomas
A1  - Wollert, Jörg
T1  - Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4
T2  - 12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece
Y1  - 2007
SN  - 1424408261 ; 9781424408269
U6  - http://dx.doi.org/10.1109/EFTA.2007.4416769
SP  - 177
EP  - 186
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Buda, Aurel
A1  - Vredal, Andreas
A1  - Wollert, Jörg
ED  - Wollert, Jörg
T1  - Einfache Integration von funkgestützten Kommunikationssystemen in der Automation
T2  - Wireless Technologies : 9. Kongress, 18. - 19. September 2007, Stuttgart ; von der Technologie zur Anwendung
Y1  - 2007
SN  - 978-3-89838-084-3
SP  - 189
EP  - 198
PB  - Aka
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Buda, Aurel
A1  - Jozenfini, B.
A1  - Wollert, Jörg
T1  - Mobile ad-hoc Network for home automation based on ZigBee application framework
T2  - 1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany
Y1  - 2007
SP  - 1
EP  - 5
PB  - Design & Elektronik
CY  - Poing
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
A1  - Blioumi, A.
A1  - Fellin, Wolfgang
A1  - Kolymbas, Dimitrios
T1  - Modelling anisotropic squeezing as a process in time
T2  - ECCOMAS Thematic Conference on Computational Methods in Tunneling ; August 27 - 29, 2007, Vienna, Austria : EURO:TUN 2007 : proceedings
Y1  - 2007
SN  - 3-9501554-7-3 ; 978-3-9501554-7-1
CY  - Wien
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
A1  - Kolymbas, Dimitrios
A1  - Fellin, Wolfgang
T1  - Modellierung von druckhaftem anisotropem Fels
T2  - 6. Österreichische Geotechniktagung : mit "Vienna - Terzaghi Lecture" ; Tagungsbeiträge 18. und 19. Jänner 2007 / Österreichischer Ingenieur- und Architekten-Verein
Y1  - 2007
SN  - 978-3-902450-58-6
SP  - 487
EP  - 498
CY  - Wien
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
T1  - Nachweis der Erdbebensicherheit von Silos aus Stahl unter Erdbebenbelastung
T2  - D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna
Y1  - 2007
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Tippkötter, Nils
A1  - Stückmann, H.
A1  - Winkelmann, G.
A1  - Noack, U.
A1  - Beutel, S.
A1  - Scheper, T.
A1  - Ulber, R.
T1  - Optimisation of antibody-labelling of gold colloids for their application in an immunchromatographic assay for microcystin-LR
T2  - European BioPerspectives : celebrating the 25th DECHEMA annual convention of biotechnologists ; 30 May - 1 June 2007, Cologne, Germany ; book of abstracts ; abstracts, poster programme
Y1  - 2007
SP  - 126
PB  - Dechema
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Schuh, Günther
A1  - Gottschalk, Sebastian Friedrich
A1  - Narr, Claus
A1  - Höhne, Tim
ED  - Zäh, Michael F.
T1  - Adaptive logistics : information management for planning and control of small series assembly
T2  - 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2007), Toronto, Ontario, Canada, 22-24 July 2007 : Book of Abstracts
Y1  - 2007
SN  - 978-0-9783187-0-3
SP  - 212
EP  - 221
ER  - 
TY  - CHAP
A1  - Drumm, Christian
A1  - Schmitt, Matthias
A1  - Do, Hong-Hai
A1  - Rahm, Erhard
T1  - Quickmig: automatic schema matching for data migration projects
T2  - Proceedings of the 2007 ACM Conference on Information and Knowledge Management / CIKM'07, Lisboa, Portugal, Nov. 6 - 10, 2007
Y1  - 2007
SN  - 978-1-59593-803-9
U6  - http://dx.doi.org/10.1145/1321440.1321458
SP  - 107
EP  - 116
ER  - 
TY  - CHAP
A1  - Weber, Ingo
A1  - Markovic, Ivan
A1  - Drumm, Christian
T1  - A conceptual framework for composition in business process management
T2  - Business Information Systems : 10th International Conference, BIS 2007, Poznan, Poland, April 25-27, 2007. Proceedings
Y1  - 2007
SN  - 978-3-540-72035-5
U6  - http://dx.doi.org/10.1007/978-3-540-72035-5_5
SP  - 54
EP  - 66
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - CHAP
A1  - Matcha, Heike
T1  - Parametric possibilities: designing with parametric modelling
T2  - Predicting the Future [25th eCAADe Conference Proceedings]
Y1  - 2007
SN  - 978-0-9541183-6-5
SP  - 849
EP  - 856
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
T1  - Low-Thrust Mission Analysis and Global Trajectory Optimization Using Evolutionary Neurocontrol: New Results
T2  - European Workshop on Space Mission Analysis ESA/ESOC, Darmstadt, Germany 10 { 12 Dec 2007
N2  - Interplanetary trajectories for low-thrust spacecraft are often characterized by multiple revolutions around the sun. Unfortunately, the convergence of traditional trajectory optimizers that are based on numerical optimal control methods depends strongly on an adequate initial guess for the control function (if a direct method is used) or for the starting values of the adjoint vector (if an indirect method is used). Especially when many revolutions around the sun are re-
quired, trajectory optimization becomes a very difficult and time-consuming task that involves a lot of experience and expert knowledge in astrodynamics and optimal control theory, because an adequate initial guess is extremely hard to find. Evolutionary neurocontrol (ENC) was proposed as a smart method for low-thrust trajectory optimization that fuses artificial neural networks and evolutionary algorithms to so-called evolutionary neurocontrollers (ENCs) [1]. Inspired by natural archetypes, ENC attacks the trajectoryoptimization problem from the perspective of artificial intelligence and machine learning, a perspective that is quite different from that of optimal control theory. Within the context of ENC, a trajectory is regarded as the result of a spacecraft steering strategy that maps permanently the actual spacecraft state and the actual target state onto the actual spacecraft control vector. This way, the problem of searching the optimal spacecraft trajectory is equivalent to the problem of searching (or "learning") the optimal spacecraft steering strategy. An artificial neural network is used to implement such a spacecraft steering strategy. It can be regarded as a parameterized function (the network function) that is defined by the internal network parameters. Therefore, each distinct set of network parameters defines a different network function and thus a different steering strategy. The problem of searching the optimal steering strategy is now equivalent to the problem of searching the optimal set of network parameters. Evolutionary algorithms that work on a population of (artificial) chromosomes are used to find the optimal network parameters, because the parameters can be easily mapped onto a chromosome. The trajectory optimization problem is solved when the optimal chromosome is found. A comparison of solar sail trajectories that have been published by others [2, 3, 4, 5] with ENC-trajectories has shown that ENCs can be successfully applied for near-globally optimal spacecraft control [1, 6] and that they are able to find trajectories that are closer to the (unknown) global optimum, because they explore the trajectory search space more exhaustively than a human expert can do. The obtained trajectories are fairly accurate with respect to the terminal constraint. If a more accurate trajectory is required, the ENC-solution can be used as an initial guess for a local trajectory optimization method. Using ENC, low-thrust trajectories can be optimized without an initial guess and without expert attendance.
Here, new results for nuclear electric spacecraft and for solar sail spacecraft are presented and it will be shown that ENCs find very good trajectories even for very difficult problems. Trajectory optimization results are presented for 1. NASA's Solar Polar Imager Mission, a mission to attain a highly inclined close solar orbit with a solar sail [7] 2. a mission to de ect asteroid Apophis with a solar sail from a retrograde orbit with a very-high velocity impact [8, 9] 3. JPL's \2nd Global Trajectory Optimization Competition", a grand tour to visit four asteroids from different classes with a NEP spacecraft
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
A1  - Loeb, Horst W.
A1  - Schartner, Karl-Heinz
T1  - A comparison of SEP and NEP for a main belt asteroid sample return mission
T2  - 7th International Symposium on Launcher Technologies, Barcelona, Spain, 02-05 April 2007
N2  - Innovative interplanetary deep space missions, like a main belt asteroid sample
return mission, require ever larger velocity increments (∆V s) and thus ever
more demanding propulsion capabilities. Providing much larger exhaust velocities than chemical high-thrust systems, electric low-thrust space-propulsion
systems can significantly enhance or even enable such high-energy missions. In
1995, a European-Russian Joint Study Group (JSG) presented a study report
on “Advanced Interplanetary Missions Using Nuclear-Electric Propulsion”
(NEP). One of the investigated reference missions was a sample return (SR)
from the main belt asteroid (19) Fortuna. The envisaged nuclear power plant,
Topaz-25, however, could not be realized and also the worldwide developments
in space reactor hardware stalled. In this paper, we investigate, whether such
a mission is also feasible using a solar electric propulsion (SEP) system and
compare our SEP results to corresponding NEP results.
Y1  - 2007
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Kahle, Ralph
A1  - Wie, Bong
T1  - Head-on impact deflection of NEAs: a case study for 99942 Apophis
T2  - Planetary Defense Conference 2007
N2  - Near-Earth asteroid (NEA) 99942 Apophis provides a typical example for the evolution of asteroid orbits that lead to Earth-impacts after a close Earth-encounter that results in a resonant return. Apophis will have a close Earth-encounter in 2029 with potential very close subsequent Earth-encounters (or even an impact) in 2036 or later, depending on whether it passes through one of several less than 1 km-sized gravitational keyholes during its 2029-encounter. A pre-2029 kinetic impact is a very favorable option to nudge the asteroid out of a keyhole. The highest impact velocity and thus deflection can be achieved from a trajectory that is retrograde to Apophis orbit. With a chemical or electric propulsion system, however, many gravity assists and thus a long time is required to achieve this. We show in this paper that the solar sail might be the better propulsion system for such a mission: a solar sail Kinetic Energy Impactor (KEI) spacecraft could impact Apophis from a retrograde trajectory with a very high relative velocity (75-80 km/s) during one of its perihelion passages. The spacecraft consists of a 160 m × 160 m, 168 kg solar sail assembly and a 150 kg impactor. Although conventional spacecraft can also achieve the required minimum deflection of 1 km for this approx. 320 m-sized object from a prograde trajectory, our solar sail KEI concept also allows the deflection of larger objects. For a launch in 2020, we also show that, even after Apophis has flown through one of the gravitational keyholes in 2029, the solar sail KEI concept is still feasible to prevent Apophis from impacting the Earth, but many KEIs would be required for consecutive impacts to increase the total Earth-miss distance to a safe value
Y1  - 2007
N1  - Planetary Defense Conference 2007, Wahington D.C., USA, 05-08 March 2007
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Loeb, Horst Wolfgang
A1  - Schartner, Karl-Heinz
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
T1  - SEP-Sample return from a main belt asteroid
T2  - 30th International Electric Propulsion Conference
N2  - By DLR-contact, sample return missions to the large main-belt asteroid “19, Fortuna” have been studied. The mission scenario has been based on three ion thrusters of the RIT-22 model, which is presently under space qualification, and on solar arrays equipped with triple-junction GaAs solar cells. After having designed the spacecraft, the orbit-to-orbit trajectories for both, a one-way SEP mission with a chemical sample return and an all-SEP return mission, have been optimized using a combination of artificial neural networks with evolutionary algorithms. Additionally, body-to-body trajectories have been
investigated within a launch period between 2012 and 2015. For orbit-to-orbit calculation, the launch masses of the hybrid mission and of the all-SEP mission resulted in 2.05 tons and 1.56 tons, respectively, including a scientific payload of 246 kg. For the related transfer
durations 4.14 yrs and 4.62 yrs were obtained. Finally, a comparison between the mission scenarios based on SEP and on NEP have been carried out favouring clearly SEP.
Y1  - 2007
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Mengali, Giovanni
A1  - Quarta, Alessandro A
A1  - Macdonald, Malcolm
A1  - McInnes, Colin R
T1  - Optical solar sail degradation modelling
T2  - 1st International Symposium on Solar Sailing
N2  - We propose a simple parametric OSSD model that describes the variation of the sail film's optical coefficients with time, depending on the sail film's environmental history, i.e., the radiation dose. The primary intention of our model is not to describe the exact behavior of specific film-coating combinations in the real space environment, but to provide a more general parametric framework for describing the general optical degradation behavior of solar sails.
Y1  - 2007
N1  - 1st International Symposium on Solar Sailing 27–29 June 2007, Herrsching, Germany
SP  - 1
EP  - 27
ER  - 
TY  - CHAP
A1  - Gömmel, A.
A1  - Butenweg, Christoph
A1  - Kob, M.
T1  - A fluid-structure interaction model of vocal fold oscillation
T2  - 5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007
N2  - Since fluid-structure interaction within the finite-element method is state of the art in many engineering fields, this method is used in voice analysis. A quasi two-dimensional model of the vocal folds including the ventricular folds is presented. First results of self-sustained vocal fold oscillation are presented and possibilities as well as limitations are discussed.
KW  - finite element method
KW  - fluid structure interaction
KW  - vocal fold oscillation
Y1  - 2007
SN  - 978-888453674-7
N1  - 5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007; Florence; Italy; 13 December 2007 through 15 December 2007
SP  - 127
EP  - 128
ER  - 
TY  - CHAP
A1  - Weiss, Alexander
A1  - Abanteriba, Sylvester
A1  - Esch, Thomas
T1  - Investigation of Flow Separation Inside a Conical Rocket Nozzle With the Aid of an Annular Cross Flow
T2  - Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B
N2  - Flow separation is a phenomenon that occurs in all kinds of supersonic nozzles sometimes during run-up and shut-down operations. Especially in expansion nozzles of rocket engines with large area ratio, flow separation can trigger strong side loads that can damage the structure of the nozzle. The investigation presented in this paper seeks to establish measures that may be applied to alter the point of flow separation. In order to achieve this, a supersonic nozzle was placed at the exit plane of the conical nozzle. This resulted in the generation of cross flow surrounding the core jet flow from the conical nozzle. Due to the entrainment of the gas stream from the conical nozzle the pressure in its exit plane was found to be lower than that of the ambient. A Cold gas instead of hot combustion gases was used as the working fluid. A mathematical simulation of the concept was validated by experiment. Measurements confirmed the simulation results that due to the introduction of a second nozzle the pressure in the separated region of the conical nozzle was significantly reduced. It was also established that the boundary layer separation inside the conical nozzle was delayed thus allowing an increased degree of overexpansion. The condition established by the pressure measurements was also demonstrated qualitatively using transparent nozzle configurations.
Y1  - 2007
SN  - 0-7918-4288-6
U6  - http://dx.doi.org/10.1115/FEDSM2007-37387
N1  - Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B. San Diego, California, USA. July 30–August 2, 2007
SP  - 1861
EP  - 1871
PB  - American Society of Mechanical Engineers (ASME)
CY  - New York
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Fuchs, Britta
ED  - Breitner, Michael
T1  - Kosten-Nutzen-Bewertungen bei mobilen Anwendungen
T2  - Mobile und Ubiquitäre Informationssysteme - Technologien, Prozesse, Marktfahigkeit. Proceedings zur 3. Konferenz Mobile und Ubiquitäre Informationssysteme (MMS 2008) 26. - 28. Februar 2008, München, Germany. - (GI-Edition : Proceedings ; 123) Breitner, Michael H. [Hrsg.]
Y1  - 2008
SN  - 978-3-88579-217-8
SP  - 164
EP  - 177
PB  - Ges. für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Kurz, Melanie
ED  - Feijs, Loe
T1  - On the benefit of moving images for the evaluation of form in virtual space : reflections in model theory
T2  - Design and semantics of form and movement : DeSForM 2008 ; [Hochschule für Gestaltung Offenbach am Main, 6.-7.11.2008]
Y1  - 2008
SN  - 978-90-809801-2-9
SP  - 31
EP  - 34
PB  - Philips
CY  - Eindhoven
ER  - 
TY  - CHAP
A1  - Kurz, Melanie
T1  - Theses on the significance of the model in the form-finding process
T2  - "Focused" - Current Design Research Projects and Methods : Swiss Design Network Symposium 2008, 30 - 31 May 2008 Mount Gurten, Berne Switzerland
Y1  - 2008
SN  - 978-3-9523138-0-0
N1  - Swiss Design Network Symposium 2008, Bern
SP  - 115
EP  - 127
PB  - SwissDesignNetwork, SDN
CY  - Genf
ER  - 
TY  - CHAP
A1  - Christen, Marc
A1  - Bartelt, Perry
A1  - Kowalski, Julia
A1  - Stoffel, Lukus
T1  - Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation programm RAMMS
T2  - Proceedings ISSW 2008 ; International Snow Science Workshop. Whistler 2008
N2  - Numerical models have become an essential part of snow avalanche engineering. Recent
advances in understanding the rheology of flowing snow and the mechanics of entrainment and
deposition have made numerical models more reliable. Coupled with field observations and historical
records, they are especially helpful in understanding avalanche flow in complex terrain. However, the
application of numerical models poses several new challenges to avalanche engineers. A detailed
understanding of the avalanche phenomena is required to specify initial conditions (release zone
dimensions and snowcover entrainment rates) as well as the friction parameters, which are no longer
based on empirical back-calculations, rather terrain roughness, vegetation and snow properties. In this
paper we discuss these problems by presenting the computer model RAMMS, which was specially
designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged
equations governing avalanche flow with first and second-order numerical solution schemes. A
tremendous effort has been invested in the implementation of advanced input and output features.
Simulation results are therefore clearly and easily visualized to simplify their interpretation. More
importantly, RAMMS has been applied to a series of well-documented avalanches to gauge model
performance. In this paper we present the governing differential equations, highlight some of the input
and output features of RAMMS and then discuss the simulation of the Gatschiefer avalanche that
occurred in April 2008, near Klosters/Monbiel, Switzerland.
KW  - snow
KW  - avalanche
Y1  - 2008
SP  - 709
EP  - 716
ER  - 
TY  - CHAP
A1  - Kowalski, Julia
A1  - McElwaine, J.
T1  - Two-phase debris flow modeling
T2  - Geophysical Research Abstracts
Y1  - 2008
N1  - A-01048
ER  - 
TY  - CHAP
A1  - Lindner, Marvin
A1  - Kolb, Andreas
A1  - Ringbeck, Thorsten
T1  - New insights into the calibration of ToF-sensors
T2  - 2008 IEEE Computer Society Conference on Computer Vision and Pattern Recognition workshops : Anchorage, AK, 23 - 28 June 2008
N2  - Time-of-flight (ToF) sensors have become an alternative to conventional distance sensing techniques like laser scanners or image based stereo. ToF sensors provide full range distance information at high frame-rates and thus have a significant impact onto current research in areas like online object recognition, collision prevention or scene reconstruction. However, ToF cameras like the photonic mixer device (PMD) still exhibit a number of challenges regarding static and dynamic effects, e.g. systematic distance errors and motion artefacts, respectively. Sensor calibration techniques reducing static system errors have been proposed and show promising results. However, current calibration techniques in general need a large set of reference data in order to determine the corresponding parameters for the calibration model. This paper introduces a new calibration approach which combines different demodulation techniques for the ToF- camera 's reference signal. Examples show, that the resulting combined demodulation technique yields improved distance values based on only two required reference data sets.
Y1  - 2008
SN  - 978-1-4244-2339-2
SN  - 978-1-4244-2340-8
SP  - 1
EP  - 5
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Braun, Carsten
T1  - Ein modulares Verfahren für die numerische aeroelastische Analyse von Luftfahrzeugen
T2  - Motto: Wissen und Visionen für ein nachhaltiges Wachstum : Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23. bis 25. September 2008 / Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR). DGLR-Jahrbuch. 2008
Y1  - 2008
SP  - 787
EP  - 796
PB  - DGLR
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Müller, Karsten
A1  - Hüben, Susanne
T1  - From rehabilitation strategy up to formation of lots : implementation of a computer-aided decision support system
T2  - 11th International Conference on Urban Drainage, Edinburgh, Scotland, UK, 31st August to 5th September 2008
Y1  - 2008
ER  -