TY  - CHAP
A1  - Butenweg, Christoph
A1  - Thierauf, Georg
T1  - Optimum cost design of reinforced concrete structures using parallel computing
T2  - Advances in computational mechanics with parallel and distributed processing : research papers presented at The First Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held at Lochinver, Scotland, between 26 April and 1 May 1997 / ed. by B. H. V. Topping
Y1  - 1997
SN  - 0-948749-47-4
SP  - 197
EP  - 202
PB  - Saxe-Coburg Publication
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Thierauf, Georg
T1  - Optimum design of reinforced concrete structures
T2  - Advances in computational structural mechanics : this volume contains a selection of papers presented at The First International Conference on Engineering Computational Technology and The Fourth International Conference on Computational Structures Technology, held in Edinburgh from 18-21 August 1998 / edited by B. H. V. Topping
Y1  - 1998
SN  - 0-948749-57-1
SP  - 447
EP  - 458
PB  - Civil-Comp Press
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Thierauf, G.
ED  - Papadrakakis, M.
ED  - Topping, B.H.V.
T1  - Automatic design of reinforced concrete structures with parallel computing
T2  - Innovative computational methods for structural mechanics
N2  - A concept for the analysis and optimal design of reinforced concrete structures is described. It is based on a nonlinear optimization algorithm and a finite element program for linear and nonlinear analysis of structures. With the aim of minimal cost design a two stage optimization using efficient gradient algorithm is developed. The optimization problems on global (structural) and local (crosssectional) level are formulated. A parallelization concept for solving the two stage optimization problem in minimal time is presented. Examples are included to illustrate the practical use and the effectively of the parallelization in the area of engineering design.
Y1  - 1999
SN  - 1-874672-05-9
U6  - http://dx.doi.org/10.4203/csets.1.14
SP  - 305
EP  - 318
PB  - Saxe-Coburg Publication
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gajewski, R.
A1  - Thierauf, Georg
T1  - A practical approach for the optimum design of reinforced concrete structures
T2  - Developments in computational mechanics with high performance computing : [papers presented at the Third Euro-Conference on Parallel and Distributed Computing for Computational Mechanics, held in Weimar, Germany between 20 - 25 March 1999] / ed. by B. H. V. Topping
Y1  - 1999
SN  - 0-94-8749-59-8
SP  - 245
EP  - 250
PB  - Civil-Comp Press
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - El-Deib, Khaled
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
A1  - Könke, Carsten
A1  - Bettzieche, Volker
T1  - Safety assessment of rockfill and masonry dams
T2  - Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ... Vol. 1
Y1  - 2002
SN  - 90-5809-510-X
SP  - 237
EP  - 242
PB  - Balkema
CY  - Lisse
ER  - 
TY  - CHAP
A1  - Holler, S.
A1  - Butenweg, Christoph
A1  - Noh, S.-Y.
A1  - Meskouris, Konstantin
T1  - Numerical simulation of textile-reinforced concrete structures
T2  - Proceedings of the Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002] / ed. by B. H. V. Topping and Z. Bittnar. (Civil-Comp Press books on computational engineering)
Y1  - 2002
SN  - 0-948749-83-0
SP  - 287
EP  - 288
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Kuhlmann, Wolfram
T1  - Technical information system for collaborative material research
T2  - Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002]
Y1  - 2002
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Wagner, R.
A1  - Noh, S.-Y.
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Seismic excited granular material silos
T2  - Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ...
Y1  - 2002
SN  - 90-5809-511-8
SP  - 253
EP  - 258
PB  - Balkema
CY  - Lisse
ER  - 
TY  - CHAP
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Pfeiffer, Frank
T1  - Textile reinforced concrete. Part I: Process model for collaborative research and development
T2  - Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universität Weimar. Ed.: K. Gürlebeck; L. Hempel; C. Könke
Y1  - 2003
SP  - 1
EP  - 8
PB  - IKM
CY  - Weimar
ER  - 
TY  - CHAP
A1  - Konrad, M.
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Bruckermann, O.
T1  - Textile reinforced concrete. Part II: Multi-level modeling concept
T2  - Digital proceedings / IKM 2003, proceedings 16th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering [Elektronische Ressource : 10. - 12. Juni 2003, Weimar] / Bauhaus-Universität Weimar. Ed.: K. Gürlebeck; L. Hempel; C. Könke
Y1  - 2003
SP  - 1
EP  - 11
PB  - IKM
CY  - Weimar
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kuhlmann, Winfried
A1  - Lopez, M.
A1  - Fernandez, S.
T1  - Seismic vulnerability assessment of the Aachen Cathedral based on measurements and numerical simulations
T2  - International Conference on Earthquake Engineering to mark 40 years from Catastrophic 1963 Skopje Earthquake, Skopje 2003
Y1  - 2003
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Peiffer, F.
T1  - Technical information system for collaborative material research
JF  - Advances in engineering software
Y1  - 2004
U6  - http://dx.doi.org/10.1016/j.advengsoft.2004.03.021
SN  - 1873-5339 (E-Journal); 0965-9978 (Print)
VL  - Volume 35
IS  - Issue 10-11
SP  - 747
EP  - 756
ER  - 
TY  - JOUR
A1  - Holler, S.
A1  - Butenweg, Christoph
A1  - Noh, S.-Y.
A1  - Meskouris, Konstantin
T1  - Computational model of textile-reinforced concrete structures
JF  - Computers & structures : an international journal
Y1  - 2004
U6  - http://dx.doi.org/10.1016/j.compstruc.2004.03.076
SN  - 1879-2243 (E-Journal); 0045-7949 (Print)
VL  - Volume 82
IS  - Issues 23-26
SP  - 1971
EP  - 1979
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Mistler, Michael
A1  - Kuhlmann, Wolfram
T1  - Seismic behaviour of historic masonry buildings
T2  - 7th National Congress on Mechanics : Chania, Crete, June 24 - 26, 2004 ; proceedings / ed. A. Kounadis ....
Y1  - 2004
SP  - 47
EP  - 49
PB  - Hellenic Society for Theoretical and Applied Mechanics
CY  - Chania
ER  - 
TY  - CHAP
A1  - Kuhlmann, Wolfram
A1  - Butenweg, Christoph
A1  - Lopez, Marijen
A1  - Fernandez, Sebastian
T1  - Seismic vulnerability assessment of the historic Aachen Cathedral
T2  - Conference proceedings / 13th World Conference on Earthquake Engineering [Vancouver, British Columbia, Canada, August 1 - 6, 2004] / [hosted by CAEE/ACGP, Canadian Association for Earthquake Engineering]
Y1  - 2004
SP  - 1
EP  - 14
PB  - CAEE
CY  - Vancouver
ER  - 
TY  - CHAP
A1  - Kob, Malte
A1  - Butenweg, Christoph
T1  - A finite element model of the interaction between intra-and extralaryngeal muscles
T2  - International Conference on Voice Physiology and Biomechanics, August 18-20, 2004, Marseille, France
Y1  - 2004
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Kalker, Ines
A1  - Toll, B.
A1  - Holler, Stefan
A1  - Butenweg, Christoph
A1  - Topping, B. H. V.
A1  - Mota Soares, C. A.
T1  - Capacity analysis of textile retrofitted unreinforced masonry
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping ...
Y1  - 2004
SN  - 0-948749-95-4
U6  - http://dx.doi.org/10.4203/ccp.79.194
SP  - 431
EP  - 432
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Mistler, M.
A1  - Butenweg, Christoph
A1  - Anthoine, A.
T1  - Evaluation of the failure criterion for masonry by homogenisation
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping and C.A. Mota Soares
Y1  - 2004
SN  - 0-948749-95-4
U6  - http://dx.doi.org/10.4203/ccp.79.201
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Rochefort, E. de
A1  - Verver, M.
A1  - Grunendahl, A.
A1  - Mooi, H.
A1  - Butenweg, Christoph
T1  - Detailed modelling of the lumbar spine for investigation of low back pain
T2  - Digital Human Modeling for Design and Engineering Symposium : Iowa City, Iowa June 14-16, 2005. (SAE technical papers series ; 2005-1-2716)
Y1  - 2005
U6  - http://dx.doi.org/10.4271/2005-01-2716
SN  - 0096-736X
SP  - 1
EP  - 11
PB  - SAE International
CY  - Warrendale, Pa.
ER  - 
TY  - JOUR
A1  - Rochefort, E. de
A1  - Verver, M.
A1  - Grunendahl, A.
A1  - Mooi, H.
A1  - Butenweg, Christoph
T1  - Detailed modelling of the lumbar spine for investigations of low back pain
JF  - SAE transactions : papers presented at Society and Section meetings / Society of Automotive Engineers
Y1  - 2005
SN  - 0096-736X
VL  - Volume 114
IS  - Part 7
SP  - 788
EP  - 796
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - Towards a complete finite-element model of human phonation: modeling phonatory maneuvers
T2  - 12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...
Y1  - 2005
SN  - 978-3-9806183-8-0
PB  - Univ., Dep. of Orthodontics
CY  - Ulm
ER  - 
TY  - CHAP
A1  - Karimi, Iman
A1  - Butenweg, Christoph
A1  - Toll, Britta
T1  - Vulnerability assessment of industrial facilities
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.34
SP  - 34, 73
EP  - 75
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Mistler, Michael
A1  - Butenweg, Christoph
T1  - A seismic design procedure for masonry buildings
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.193
SP  - 465
EP  - 467
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic vulnerability assessment system for bridges
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
SP  - 1
EP  - 14
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Grunendahl, A.
A1  - de Rochefort, E.
A1  - Butenweg, Christoph
T1  - Numerical models for investigating the causes of low back pain due to whole-body vibrations
T2  - 2nd International Conference on Computational Bioengineering : Lisbon, September 14-16 2005. Volume 2.
Y1  - 2005
SN  - 978-972-8469-37-3
SP  - 905
EP  - 914
PB  - IST Press
CY  - Lisbon
ER  - 
TY  - CHAP
A1  - Kalker, Ines
A1  - Neumann, M.
A1  - Butenweg, Christoph
A1  - Holler, Stefan
T1  - Modelling of textile strengthened masonry
T2  - Proceedings of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing : [Rome, Italy, 30. August - 2. September 2005] / ed. by B. H. V. Topping
Y1  - 2005
SN  - 1-905088-00-0
U6  - http://dx.doi.org/10.4203/ccp.81.184
SP  - 447
EP  - 448
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Krämer, Sebastian
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - A combined FE and multiple-mass model for numerical simulation of phonatory maneuvers
T2  - Proceedings / Forum Acusticum, Budapest, 29 Aug - 2 Sep, 2005 : [Acoustics: science and technology for knowledge based society and healthy environment] / ed. by: Fülöp Augusztinovicz ...
Y1  - 2005
SN  - 978-963-8241-68-9
SP  - 2759
EP  - 2764
PB  - OPAKFI Tud. Egyesület
CY  - Budapest
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
T1  - Seismic vulnerability assessment of bridges
T2  - First Munich Bridge Assessment Conference, MBAC 2005 : Munich, 20.-25. June 2005
Y1  - 2005
SP  - 1
EP  - 16
ER  - 
TY  - JOUR
A1  - Mistler, Michael
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Modelling methods of historic masonry buildings under seismic excitation
JF  - Journal of seismology
Y1  - 2006
U6  - http://dx.doi.org/10.1007/s10950-006-9033-z
SN  - 1383-4649 (Print) ; 1573-157X (E-Journal)
VL  - Volume 10
IS  - No. 4
SP  - 497
EP  - 510
ER  - 
TY  - CHAP
A1  - Kob, Malte
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Niendorf, Thoralf
T1  - Training of a combined model of larynx and vocal folds with data from MRI measurements
T2  - The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings
Y1  - 2006
SP  - 45
EP  - 46
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic resistance of unreinforced masonry buildings
T2  - Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...
Y1  - 2006
SN  - 1-905088-06-X
U6  - http://dx.doi.org/10.4203/ccp.83.9
SP  - Paper 9
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - JOUR
A1  - Mistler, Michael
A1  - Anthoine, A.
A1  - Butenweg, Christoph
T1  - In-plane and out-of-plane homogenisation of masonry
JF  - Computers & structures
Y1  - 2007
U6  - http://dx.doi.org/10.1016/j.compstruc.2006.08.087
SN  - 1879-2243 (E-Journal); 0045-7949 (Print)
VL  - Volume 85
IS  - Issues 17-18
SP  - 1321
EP  - 1330
ER  - 
TY  - JOUR
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Bolender, Katrin
A1  - Grunendahl, Arno
T1  - A muscle controlled finite-element model of laryngeal abduction and adduction
JF  - Computer methods in biomechanics and biomedical engineering
Y1  - 2007
SN  - 1476-8259 (E-Journal); 1025-5842 (Print)
VL  - Volume 10
IS  - Issue 5
SP  - 377
EP  - 388
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Kalker, Ines
A1  - Mistler, Michael
T1  - Numerical simulation of historic masonry buildings
T2  - Antike Erdbeben im alpinen und zirkumalpinen Raum : Befunde und Probleme in archäologischer, historischer und seismologischer Sicht ; Beiträge des Interdisziplinären Workshops Schloss Hohenkammer, 14./15. Mai 2004 = Earthquakes in antiquity in the alpine and circum-alpine region / Gerhard H. Waldherr ; Anselm Smolka (Hrsg.) (Geographica Historica ; 24)
Y1  - 2007
SN  - 978-3-515-09030-8 ; 3-515-09030-4
SP  - 171
EP  - 189
PB  - Franz Steiner Verlag
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Gömmel, A.
A1  - Butenweg, Christoph
A1  - Kob, M.
T1  - A fluid-structure interaction model of vocal fold oscillation
T2  - 5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007
N2  - Since fluid-structure interaction within the finite-element method is state of the art in many engineering fields, this method is used in voice analysis. A quasi two-dimensional model of the vocal folds including the ventricular folds is presented. First results of self-sustained vocal fold oscillation are presented and possibilities as well as limitations are discussed.
KW  - finite element method
KW  - fluid structure interaction
KW  - vocal fold oscillation
Y1  - 2007
SN  - 978-888453674-7
N1  - 5th International Workshop on Models and Analysis of Vocal Emissions for Biomedical Applications, MAVEBA 2007; Florence; Italy; 13 December 2007 through 15 December 2007
SP  - 127
EP  - 128
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Reindl, Lukas
T1  - Capacity design of masonry buildings under cyclic loading
T2  - Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Liège on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...
Y1  - 2008
SN  - 978-2-87456-063-7
SP  - 201
EP  - 208
PB  - Editions de l'Université de Liège
CY  - Liège
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - Displacement based design of masonry structures
T2  - Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...
Y1  - 2008
SN  - 978-19-2070-1-92-5
SP  - 1
EP  - 10
PB  - University of Newcastle
CY  - Callaghan
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Nonlinear behaviour of masonry under cyclic loading
T2  - 7th European Conference on Structural Dynamics, EURODYN 2008 : 7-9 July 2008, Southampton
Y1  - 2008
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Baumgartner, Werner
A1  - Fidler, Florian
A1  - Weth, Agnes
A1  - Habbecke, Martin
A1  - Jakob, Peter
A1  - Butenweg, Christoph
A1  - Böhme, Wolfgang
T1  - Investigating the locomotion of the sandfish in desert sand using NMR-Imaging
JF  - PLOS ONE
N2  - The sandfish (Scincus scincus) is a lizard having the remarkable ability to move through desert sand for significant distances. It is well adapted to living in loose sand by virtue of a combination of morphological and behavioural specializations. We investigated the bodyform of the sandfish using 3D-laserscanning and explored its locomotion in loose desert sand using fast nuclear magnetic resonance (NMR) imaging. The sandfish exhibits an in-plane meandering motion with a frequency of about 3 Hz and an amplitude of about half its body length accompanied by swimming-like (or trotting) movements of its limbs. No torsion of the body was observed, a movement required for a digging-behaviour. Simple calculations based on the Janssen model for granular material related to our findings on bodyform and locomotor behaviour render a local decompaction of the sand surrounding the moving sandfish very likely. Thus the sand locally behaves as a viscous fluid and not as a solid material. In this fluidised sand the sandfish is able to “swim” using its limbs.
KW  - magnetic resonance imaging
KW  - body limbs
KW  - swimming
KW  - lizards
KW  - deserts
Y1  - 2008
U6  - http://dx.doi.org/10.1371/journal.pone.0003309
SN  - 1932-6203
VL  - 3
IS  - 10
PB  - Plos
CY  - San Francisco, California, US
ER  - 
TY  - JOUR
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Seismic design of non-structural components in industrial facilities
JF  - International journal of engineering under uncertainty
Y1  - 2009
SN  - 0975-4806
VL  - Volume 1
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Kob, Malte
A1  - Niendorf, Thoralf
A1  - Butenweg, Christoph
T1  - An approach for numerical calculation of glottal flow during glottal closure
T2  - Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone
Y1  - 2009
SN  - 978-3-9808659-6-8
SP  - 1722
EP  - 1725
PB  - DEGA
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Holler, Stefan
A1  - Butenweg, Christoph
A1  - Meiners, Daniel
T1  - A multiphase model with hypoplastic formulation of the solid phase and its application to earthquake engineering problems
T2  - Computational structural dynamics and earthquake engineering / ed. by Manolis Papadrakakis .... (Structures and infrastructures series ; 2)
Y1  - 2009
SN  - 978-0-415-45261-8
U6  - http://dx.doi.org/10.1201/9780203881637.ch19
SP  - 293
EP  - 308
PB  - CRC Press
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - GEN
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Reindl, Lukas
A1  - Meskouris, Konstantin
T1  - A nonlinear method for the seismic safety verification of masonry buildings
N2  - In order for traditional masonry to stay a competitive building material in seismically active regions there is an urgent demand for modern, deformation-based verification procedures which exploit the nonlinear load bearing reserves. The Capacity Spectrum Method (CSM) is a widely accepted design approach in the field of reinforced concrete and steel construction. It compares the seismic action with the load-bearing capacity of the building considering nonlinear material behavior with its post-peak capacity. The bearing capacity of the building is calculated iteratively using single wall capacity curves. This paper presents a new approach for the bilinear approximation of single wall capacity curves in the style of EC6/EC8 respectively FEMA 306/FEMA 356 based on recent shear wall test results of the European Collective-Research Project “ESECMaSE”. The application of the CSM to masonry structures by using bilinear approximations of capacity curves as input is demonstrated on the example of a typical German residential home.
Y1  - 2009
N1  - COMPDYN 2009 - 2nd International Conference on Computational Methods in Structural Dynamics & Earthquake Engineering. Isles of Rhodes, Greece, June 22-24,2009.
PB  - National Technical University of Athens
CY  - Athen
ER  - 
TY  - JOUR
A1  - Frauenrath, Tobias
A1  - Hezel, Fabian
A1  - Heinrichs, Uwe
A1  - Kozerke, Sebastian
A1  - Utting, Jane
A1  - Kob, Malte
A1  - Butenweg, Christoph
A1  - Boesiger, Peter
A1  - Niendorf, Thoralf
T1  - Feasibility of Cardiac Gating Free of Interference With Electro-Magnetic Fields at 1.5 Tesla, 3.0 Tesla and 7.0 Tesla Using an MR-Stethoscope
JF  - Investigative Radiology
KW  - phonocardiogram
KW  - electrocardiogram
KW  - cardiac gating
KW  - high field MR imaging
KW  - cardiovascular MR imaging
Y1  - 2009
U6  - http://dx.doi.org/10.1097/RLI.0b013e3181b4c15e
SN  - 1536-0210 (online)
SN  - 0020-9996 (gedruckt)
VL  - 44
IS  - 9
SP  - 539
EP  - 547
PB  - Lippincott Williams & Wilkins ; (via Ovid)
CY  - Philadelphia, Pa
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Niendorf, Thoralf
A1  - Frauenrath, Tobias
A1  - Otten, Mario
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - 3D vocal fold geometry mapping using Magnetic Resonance Imaging
T2  - Fortschritte der Akustik : 36. Deutsche Jahrestagung für Akustik ; 15.-18. März 2010, [Berlin ; DAGA 2010] / DEGA ... Wiss. Ed. Michael Möser ... Band 1
Y1  - 2010
SN  - 978-3-9808659-8-2
SP  - 271
EP  - 272
PB  - Deutsche Gesellschaft für Akustik
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Frauenrath, Tobias
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Otten, Mario
A1  - Niendorf, Thoralf
T1  - 3D mapping of vocal fold geometry during articulatory maneuvers using ultrashort echo time imaging at 3.0 T
T2  - ISMRM-ESMRMB joint annual meeting 2010 : Stockholm, Sweden, 1 - 7 May 2010. Band 4
Y1  - 2010
SN  - 978-1-617-82008-3
SP  - 3087
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Park, Jin
A1  - Butenweg, Christoph
T1  - Seismic safety verification of masonry structures
T2  - Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universität Dresden]. Ed. by: Wolfram Jäger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)
Y1  - 2010
SN  - 978-3-00-031381-3
SP  - 813
EP  - 822
PB  - ARGE 8IMC Dresden
CY  - Radebeul
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Seismic design of masonry walls subject to out-of-plane bending
T2  - Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...
Y1  - 2010
SN  - 978-1-905088-36-2
U6  - http://dx.doi.org/10.4203/ccp.93.348
SP  - Paper 348
PB  - Civil-Comp Press
CY  - Kippen
ER  - 
TY  - JOUR
A1  - Becker, Meike
A1  - Frauenrath, Tobias
A1  - Hezel, Fabian
A1  - Krombach, Gabriele A.
A1  - Kremer, Ute
A1  - Koppers, Benedikt
A1  - Butenweg, Christoph
A1  - Goemmel, Andreas
A1  - Utting, Jane F.
A1  - Schulz-Menger, Jeanette
A1  - Niendorf, Thoralf
T1  - Comparison of left ventricular function assessment using phonocardiogram- and electrocardiogram-triggered 2D SSFP CINE MR imaging at 1.5 T and 3.0 T
JF  - European Radiology
N2  - Objective: As high-field cardiac MRI (CMR) becomes more widespread the propensity of ECG to interference from electromagnetic fields (EMF) and to magneto-hydrodynamic (MHD) effects increases and with it the motivation for a CMR triggering alternative. This study explores the suitability of acoustic cardiac triggering (ACT) for left ventricular (LV) function assessment in healthy subjects (n=14). Methods: Quantitative analysis of 2D CINE steady-state free precession (SSFP) images was conducted to compare ACT’s performance with vector ECG (VCG). Endocardial border sharpness (EBS) was examined paralleled by quantitative LV function assessment. Results: Unlike VCG, ACT provided signal traces free of interference from EMF or MHD effects. In the case of correct Rwave recognition, VCG-triggered 2D CINE SSFP was immune to cardiac motion effects—even at 3.0 T. However, VCG-triggered 2D SSFP CINE imaging was prone to cardiac motion and EBS degradation if R-wave misregistration occurred. ACT-triggered acquisitions yielded LV parameters (end-diastolic volume (EDV), endsystolic volume (ESV), stroke volume (SV), ejection fraction (EF) and left ventricular mass (LVM)) comparable with those derived fromVCG-triggered acquisitions (1.5 T: ESVVCG=(56± 17) ml, EDVVCG=(151±32)ml, LVMVCG=(97±27) g, SVVCG=(94± 19)ml, EFVCG=(63±5)% cf. ESVACT= (56±18) ml, EDVACT=(147±36) ml, LVMACT=(102±29) g, SVACT=(91± 22) ml, EFACT=(62±6)%; 3.0 T: ESVVCG=(55±21) ml, EDVVCG=(151±32) ml, LVMVCG=(101±27) g, SVVCG=(96±15) ml, EFVCG=(65±7)% cf. ESVACT=(54±20) ml, EDVACT=(146±35) ml, LVMACT= (101±30) g, SVACT=(92±17) ml, EFACT=(64±6)%). Conclusions: ACT’s intrinsic insensitivity to interference from electromagnetic fields renders
KW  - Magnetic resonance imaging (MRI)
KW  - MR-stethoscope
KW  - Magnetic field strength
KW  - Left ventriular function
KW  - Cardiovascular MRI
Y1  - 2010
U6  - http://dx.doi.org/10.1007/s00330-009-1676-z
SN  - 1432-1084 (Onlineausgabe)
SN  - 0938-7994 (Druckausgabe)
VL  - 20
SP  - 1344
EP  - 1355
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Park, Jin
A1  - El-Daib, Khaled
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - A novel macroelement approach for masonry walls
T2  - Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)
Y1  - 2011
SN  - 978-90-76019-31-4
SP  - 3281
EP  - 3286
PB  - K. U. Leuven, Dep. of Civil Engineering
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Butenweg, Christoph
A1  - Kubalski, Thomas
T1  - Numerical simulation of unreinforced masonry walls subject to dynamic out-of-plane loading
T2  - COMPDYN 2011 : ECCOMAS Thematic Conference ; Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering ; 25-28 May, 2011, Corfu, Greece / Eds.: M. Papadrakakis ...
Y1  - 2011
SN  - 978-960-99994-0-3
SP  - 1
EP  - 10
PB  - National Technical Univ. of Athens
CY  - Athen
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
A1  - Rosin, Julia
T1  - Seismic analysis of liquid storage tanks
T2  - Earthquake Geology and Archaeology: Science, Society and Critical facilities : proceedings ; 2nd INQUA-IGCP 567 International Workshop on Active Tectonics, Earthquake Geology, Archaeology and Engineering ; 19-24 September 2011, Corinth (Greece) / Eds.: C. Grützner ; R. Pérez-Lopez ; T. Fernández Steeger ; I. Papanikolaou ; K. Reicherter ; P. G. Silva ; A. Vött. Volume 2
Y1  - 2011
SN  - 978-960-466-093-3
SP  - 136
EP  - 139
PB  - The Natural hazards Laboratory, National and Kapodistrian University of Athens
CY  - Athens
ER  - 
TY  - CHAP
A1  - Taddei, Francesca
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Butenweg, Christoph
A1  - Karadogan, Faruk
T1  - Numerical investigation of AAC wall panels based on the damage plasticity constitutive law
T2  - Cement, Wapno, Beton ; 2011, 7, Special issue: 5th International Conference on Autoclaved Aerated Concrete 'Securing a sustainable future' to be held at Bydgoszcz to celebrate 60 years of AAC experience in Poland, Bydgoszcz, September 14-17, 2011
Y1  - 2011
SN  - 1425-8129
SP  - 86
EP  - 91
PB  - Stowarzyszenie Producentów Cementu i Wapna
CY  - Krakow
ER  - 
TY  - JOUR
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sesov, Vlatko
A1  - Cvetanovska, Julijana
A1  - Gjorgiev, Igor
T1  - Numerical simulation of geotechnical problems by coupled finite and infinite elements
JF  - Journal of civil engineering and architecture
Y1  - 2013
SN  - 1934-7359 (E-Journal)
VL  - 7
IS  - 1
SP  - 68
EP  - 77
PB  - David Publishing
CY  - Libertyville
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Kubalski, Thomas
T1  - Seismic response of conventional and base-isolated liquid storage tanks
T2  - International Conference on Earthquake Engineering : 29.-31.05.2013, Skopje, Mazedonien
Y1  - 2013
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kleemann, Anne
A1  - Altay, Okyay
A1  - Renault, Philippe
T1  - Simulation of impact-loads on reinforced concrete structural elements
T2  - 22nd International Conference on Structural Mechanics in Reactor Technology 2013 : (SMiRT 22) ; San Francisco, California, USA, 18 - 23 August 2013
Y1  - 2013
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Churilov, Sergej
A1  - Dumova-Jovanoska, Elena
A1  - Butenweg, Christoph
ED  - Adam, Christoph
ED  - Heuer, Rudolf
ED  - Lenhardt, Wolfgang
ED  - Schranz, Christian
T1  - Seismic verification of existing masonry buildings and strengthening with reinforced concrete jackets
T2  - Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)
N2  - A methodology for assessment, seismic verification and strengthening of existing masonry buildings is presented in this paper. The verification is performed using a calculation model calibrated with the results from ambient vibration measurements. The calibrated model serves as an input for a deformation-based verification procedure based on the Capacity Spectrum Method (CSM). The bearing capacity of the building is calculated from experimental capacity curves of the individual walls idealized with bilinear elastic-perfectly plastic curves. The experimental capacity curves were obtained from in-plane cyclic loading tests on unreinforced and strengthened masonry walls with reinforced concrete jackets. The seismic action is compared with the load-bearing capacity of the building considering non-linear material behavior with its post-peak capacity. The application of the CSM to masonry buildings and the influence of a traditional strengthening method are demonstrated on the example of a public school building in Skopje, Macedonia.
Y1  - 2013
SN  - 978-3-902749-04-8
N1  - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics, Vienna, Austria, Paper No. 523
13. D-A-CH Tagung ; Vienna, Austria, 29. - 30. August 2013
http://hdl.handle.net/20.500.12188/15830 (Error - Cannot Connect to Server)
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Norda, Hannah
ED  - Adam, Christoph
ED  - Heuer, Rudolf
ED  - Lenhardt, Wolfgang
ED  - Schranz, Christian
T1  - Nonlinear analysis of masonry structures according to Eurocode 8
T2  - Proceedings - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics 2013 (VEESD 2013)
Y1  - 2013
SN  - 978-3-902749-04-8
N1  - Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics, Vienna, Austria, Paper No. 523
13. D-A-CH Tagung ; Vienna, Austria, 29. - 30. August 2013
http://hdl.handle.net/20.500.12188/15830 (Error - Cannot Connect to Server)
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Vibration control of slender structures by semi-active tuned liquid column dampers
T2  - Conference of the ASCE Engineering Mechanics Institute , Evanston, IL , USA , EMI 2013 , 2013-08-04 - 2013-08-07
Y1  - 2013
N1  - http://www.emi2013.northwestern.edu/openconf/modules/request.php?module=oc_program&action=view.php&a=&id=213&type=1
Seite kann nicht gefunden werden.
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
ED  - Klinkel, Sven
ED  - Butenweg, Christoph
ED  - Lin, Gao
ED  - Holtschoppen, Britta
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities
N2  - Seismic excited liquid filled tanks are subjected to extreme loading due to hydrodynamic pressures, which can lead to nonlinear stability failure of the thinwalled cylindrical tanks, as it is known from past earthquakes. A significant reduction of the seismically induced loads can be obtained by the application of base isolation systems, which have to be designed carefully with respect to the modified hydrodynamic behaviour of the tank in interaction with the liquid. For this reason a highly sophisticated fluid-structure interaction model has to be applied for a realistic simulation of the overall dynamic system. In the following, such a model is presented and compared with the results of simplified mathematical models for rigidly supported tanks. Finally, it is examined to what extent a simple mechanical model can represent the behaviour of a base isolated tank in case of seismic excitation
Y1  - 2013
SN  - 978-3-658-02810-7
SN  - 978-3-658-02809-1
SN  - 978-3-658-14037-3
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_36
N1  - International Conference on Seismic Design of Industrial Facilities, Aachen, Germany, 26.-27.09.2013.
https://sedif-conference.jimdofree.com/
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Taddei, Francesca
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Vibration mitigation of wind turbine towers with tuned mass dampers
T2  - Wind turbine control and monitoring. (Advances in industrial control)
N2  - Because of its minor environmental impact, electricity generation using wind power is getting remarkable. The further growth of the wind industry depends on technological solutions to the challenges in production and construction of the turbines. Wind turbine tower vibrations, which limit power generation efficiency and cause fatigue problems with high maintenance costs, count as one of the main structural difficulties in the wind energy sector. To mitigate tower vibrations auxiliary measures are necessary. The effectiveness of tuned mass damper is verified by means of a numeric study on a 5 MW onshore reference wind turbine. Hereby, also seismic-induced vibrations and soil–structure interaction are considered. Acquired results show that tuned mass damper can effectively reduce resonant tower vibrations and improve the fatigue life of wind turbines. This chapter is also concerned with tuned liquid column damper and a semiactive application of it. Due to its geometric versatility and low prime costs, tuned liquid column dampers are a good alternative to other damping measures, in particular for slender structures like wind turbines.
Y1  - 2014
SN  - 978-3-319-08412-1 (Print) ; 978-3-319-08413-8 (E-Book)
U6  - http://dx.doi.org/10.1007/978-3-319-08413-8_12
SP  - 337
EP  - 373
PB  - Springer
CY  - Cham ; Heidelberg ; New York ; Dordrecht ; London
ER  - 
TY  - BOOK
A1  - Klinkel, Sven
A1  - Butenweg, Christoph
A1  - Lin, Gao
A1  - Holtschoppen, Britta
T1  - Seismic design of industrial facilities : Proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF) /  Sven Klinkel, Christoph Butenweg, Gao Lin, Britta Holtschoppen Editors
Y1  - 2014
SN  - 978-3-658-02809-1 (Print) ; 978-365-80281-0-7 (E-Book)
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - RPRT
A1  - Butenweg, Christoph
A1  - Kaiser, Diethelm
T1  - Seismic hazard harmonisation in Europe (SHARE) : DGEB-Workshop in Frankfurt a.M., Germany, 27. May 2014 / Christoph Butenweg, Diethelm Kaiser (editors)
Y1  - 2014
SN  - 3-930108-12-7
PB  - DGEB
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sheshov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - New coupled finite-infinite element approach for wave propagation simulation of unbounded soil media
T2  - 2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 2
Y1  - 2014
SN  - 978-1-5108-1021-1
SP  - 1556
EP  - 1561
PB  - Curran Associates, Inc.
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
A1  - Taddei, Francesca
T1  - Vibration mitigation of wind turbine towers by tuned liquid column dampers
T2  - Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)
Y1  - 2014
SN  - 978-972-752-165-4
SP  - 1531
EP  - 1538
CY  - Porto
ER  - 
TY  - CHAP
A1  - Dalguer, Luis A.
A1  - Churilov, Sergey
A1  - Butenweg, Christoph
A1  - Renault, Philippe
A1  - Hyun, An Jun
T1  - Dynamic analysis of a reinforced concrete electrical nuclear building of SMART 2013 project subjected to earthquake excitation using ABAQUS
T2  - Workshop SMART2013 : Paris, France, November 25th - 27th, 2014
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Seismic Design of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed.
Y1  - 2014
SN  - 978-3-658-02810-7 (E-Book) ; 978-3-658-02809-1 (Print)
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_36
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sesov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - Boundary effects on seismic analysis of multi-storey frames considering soil structure interaction phenomenon
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed
Y1  - 2014
SN  - 978-3-658-02809-1 (Print) ; 978-3-658-02810-7
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_47
SP  - 569
EP  - 576
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
A1  - Andreini, M.
A1  - De Falco, A.
A1  - Sassu, M.
T1  - Numerical calibration of a macro-element for vaultes system in historic churches
T2  - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
A1  - Andreini, M.
A1  - De Falco, A.
A1  - Sassu, M.
T1  - Macro-elements identification in historic chapels: the case of St. Venerio Chapel in Reggiolo - Emilia Romagna
T2  - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)
Y1  - 2014
SN  - 978-972-752-165-4
SP  - 3145
EP  - 3152
CY  - Porto
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Henneböhl, Benedickt
A1  - Butenweg, Christoph
T1  - Global buckling analysis of cylindrical liquid storage tanks under earthquake loading
T2  - 2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 6
Y1  - 2014
SN  - 978-1-5108-1021-1
SP  - 5270
EP  - 5281
PB  - Curran Associates, Inc.
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Vibration mitigation of wind turbine towers by a new semiactive Tuned Liquid Column Damper
T2  - 6. Word Congress on Structural Control and Monitoring, 15 - 17 July, 2014 Barcelona,Spain
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Rajan, Sreelakshmy
T1  - Design and construction techniques of AAC masonry buildings in earthquakes regions
T2  - 10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Meyer, Udo
A1  - Fehling, Ekkehard
T1  - INSYSME: first activities of the German partners
T2  - 9th International Masonry Conference 2014 in Guimaraes, Portugal, 2014
Y1  - 2014
ER  - 
TY  - JOUR
A1  - Taddei, Francesca
A1  - Butenweg, Christoph
A1  - Klinkel, S.
T1  - Parametric investigation of the soil-structure interaction effects on the dynamic behaviour of a shallow foundation supported wind turbine considering a layered soil
JF  - Wind energy : an international journal for progress and applications in wind power conversion technology
Y1  - 2015
U6  - http://dx.doi.org/10.1002/we.1703
SN  - 1099-1824 (E-Journal); 1095-4244 (Print)
VL  - Volume 18
IS  - Issue 3
SP  - 399
EP  - 417
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Taddei, Francesca
A1  - Lozana, Lara
A1  - Michel, Philipp
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
ED  - Papadrakakis, Manolis
ED  - Papadrakakis, M.
ED  - Papadopoulos, V.
ED  - Plevris, V.
T1  - Practical recommendations for the foundation design of onshore wind turbines including soil-structure interaction
T2  - 5th International Conference on Computational Methods in Structural , Hersonissos, Greece Dynamics and Earthquake Engineering, COMPDYN 2015, 25.05.2015-27.05.2015, Hersonissos, Greece.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Dalguer, Luis A.
A1  - Renault, Philippe
A1  - Churilov, Sergey
A1  - Butenweg, Christoph
T1  - Evaluation of fragility curves for a three-storey-reinforced-concrete mock-up of SMART 2013 project
T2  - Transactions, SMiRT-23 : 23rd Conference on Structural Mechanics in Reactor Technology : Manchester, United Kingdom - August 10-14, 2015
Y1  - 2016
SP  - 1
EP  - 9
ER  - 
TY  - JOUR
A1  - Mykoniou, Konstantin
A1  - Butenweg, Christoph
A1  - Holtschoppen, Britta
A1  - Klinkel, Sven
T1  - Seismic response analysis of adjacent liquid-storage tanks
JF  - Earthquake engineering and structural dynamics
N2  - A refined substructure technique in the frequency domain is developed, which permits consideration of the interaction effects among adjacent containers through the supporting deformable soil medium. The tank-liquid systems are represented by means of mechanical models, whereas discrete springs and dashpots stand for the soil beneath the foundations. The proposed model is employed to assess the responses of adjacent circular, cylindrical tanks for harmonic and seismic excitations over wide range of tank proportions and soil conditions. The influence of the number, spatial arrangement of the containers and their distance on the overall system's behavior is addressed. The results indicate that the cross-interaction effects can substantially alter the impulsive components of response of each individual element in a tank farm. The degree of this impact is primarily controlled by the tank proportions and the proximity of the predominant natural frequencies of the shell-liquid-soil systems and the input seismic motion. The group effects should be not a priori disregarded, unless the tanks are founded on shallow soil deposit overlying very stiff material or bedrock.
KW  - liquid-structure interaction
KW  - seismic response
KW  - impulsive effects
KW  - liquid-storage tank
KW  - structure-soil-structure interaction
Y1  - 2016
U6  - http://dx.doi.org/10.1002/eqe.2726
SN  - 1096-9845 (E-Journal); 0098-8847 (Print)
VL  - 45
IS  - 11
SP  - 1779
EP  - 1796
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
A1  - Kubalski, Thomas
A1  - Klinkel, Sven
T1  - Masonry infilled reinforced concrete frames under  horizontal  loading
T1  - Stahlbetonrahmen mit Ausfachungen aus Mauerwerk unter horizontalen Belastungen
JF  - Mauerwerk
N2  - The behaviour of infilled reinforced concrete frames under horizontal load has been widely investigated, both experimentally and numerically. Since experimental tests represent large investments, numerical simulations offer an efficient approach for a more comprehensive analysis. When RC frames with masonry infill walls are subjected to horizontal loading, their behaviour is highly non-linear after a certain limit, which makes their analysis quite difficult. The non-linear behaviour results from the complex inelastic material properties of the concrete, infill wall and conditions at the wall-frame interface. In order to investigate this non-linear behaviour in detail, a finite element model using a micro modelling approach is developed, which is able to predict the complex non-linear behaviour resulting from the different materials and their interaction. Concrete and bricks are represented by a non-linear material model, while each reinforcement bar is represented as an individual part installed in the concrete part and behaving elasto-plastically. Each brick is modelled individually and connected taking into account the non-linearity of a brick mortar interface. The same approach is followed using two finite element software packages and the results are compared with the experimental results. The numerical models show a good agreement with the experiments in predicting the overall behaviour, but also very good matching for strength capacity and drift. The results emphasize the quality and the valuable contribution of the numerical models for use in parametric studies, which are needed for the derivation of design recommendations for infilled frame structures.
Y1  - 2016
U6  - http://dx.doi.org/10.1002/dama.201600703
SN  - 1437-1022
VL  - 20
IS  - 4
SP  - 305
EP  - 312
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Kubalski, T.
A1  - Marinković, Marko
A1  - Butenweg, Christoph
ED  - Modena, Claudio
T1  - Numerical investigation of masonry infilled R.C. frames
T2  - Brick and Block Masonry. Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016
Y1  - 2016
SN  - 9781315374963
SP  - 1219
EP  - 1226
PB  - CRC Press
CY  - Leiden
ER  - 
TY  - CHAP
A1  - Rajan, Sreelakshmy
A1  - Holtschoppen, B.
A1  - Dalguer, L. A.
A1  - Klinkel, S.
A1  - Butenweg, Christoph
ED  - Sas, P.
T1  - Seismic fragility analysis of a non-conventional reinforced concrete structure considering different uncertainties
T2  - Proceedings of ISMA2016, International Conference on Noise and Vibration Engineering/USD2016, International Conference on Uncertainty in Structural Dynamics, / ISMA 2016, USD 2016
Y1  - 2016
SP  - 4213
EP  - 4225
PB  - KU Leuven
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Lu, S.
A1  - Beyer, K.
A1  - Bosiljkov, V.
A1  - Butenweg, Christoph
A1  - D’Ayala, D.
A1  - Degee, H.
A1  - Gams, M.
A1  - Klouda, J.
A1  - Lagomarsino, S.
A1  - Penna, A.
A1  - Mojsilovic, N.
A1  - da Porto, F.
A1  - Sorrentino, L.
A1  - Vintzileou, E.
ED  - Modena, Claudio
ED  - da Porto, F.
ED  - Valluzzi, M.R.
T1  - Next generation of Eurocode 8, masonry chapter
T2  - Brick and Block Masonry Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016
N2  - This paper describes the procedure on the evaluation of the masonry chapter for the next generation of Eurocode 8, the European Standard for earthquake-resistant design. In CEN, TC 250/SC8, working group WG 1 has been established to support the subcommittee on the topic of masonry on both design of new structures (EN1998-1) and assessment of existing structures (EN1998-3). The aim is to elaborate suggestions for amendments which fit the current state of the art in masonry and earthquake-resistant design. Focus will be on modelling, simplified methods, linear-analysis (q-values, overstrength-values), nonlinear procedures, out-of-plane design as well as on clearer definition of limit states. Beside these, topics related to general material properties, reinforced masonry, confined masonry, mixed structures and non-structural infills will be covered too. This paper presents the preliminary work and results up to the submission date.
Y1  - 2016
SN  - 978-1-138-02999-6 (Print)
SN  - 9781315374963 (E-Book)
SP  - 695
EP  - 700
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Rosin, J.
A1  - Mykoniou, K.
A1  - Butenweg, Christoph
T1  - Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables
the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by
employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical
component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results
manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.
KW  - liquid storage tank
KW  - seismic isolation
KW  - elastomeric bearing
KW  - friction pendulum bearing
KW  - simplified approach
Y1  - 2017
N1  - Paper No 2246
SP  - 1
EP  - 14
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Kubalski, T.
A1  - Butenweg, Christoph
A1  - Marinković, Marko
A1  - Klinkel, S.
T1  - Investigation Of The Seismic Behaviour Of Infill Masonry Using Numerical Modelling Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Masonry is a widely spread construction type which is used all over the world for different types of structures. Due to its simple and cheap construction, it is used as non-structural as well as structural element. In frame structures, such as
reinforced concrete frames, masonry may be used as infill. While the bare frame itself is able to carry the loads when it comes to seismic events, the infilled frame is not able to warp freely due to the constrained movement. This restraint results in a complex interaction between the infill and the surrounding frame, which may lead to severe damage to the infill as well as the surrounding frame. The interaction is studied in different projects and effective approaches for the description of the behavior are still lacking. Experimental programs are usually quite expensive, while numerical models, once validated, do offer an efficient approach for the investigation of the interaction when horizontally loaded. In order to study the numerous parameters influencing the seismic load bearing behavior, numerical models may be used. Therefore, this contribution presents a numerical approach for the simulation of infill masonry in reinforced concrete frames. Both parts, the surrounding frame as well as the infill are represented by micro modelling approaches to correctly take into account the different types of failure. The adopted numerical model describes the inelastic behavior of the system, as indicated by the obtained results of the overall structural response as well as the formation of damage in the infilled wall. Comparison of the numerical and experimental results highlights the valuable contribution of numerical simulations in the study and design of infilled frames. As damage of the infill masonry may occur in-plane due to the interaction as well as out-of-plane due to the low vertical load, both directions of loading are investigated.
Y1  - 2017
N1  - Paper No 3064
SP  - 1
EP  - 11
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - JOUR
A1  - Klein, Michel
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - The Influence of Soil-Structure-Interaction on the Fatigue Analysis in the Foundation Design of Onshore Wind Turbines
JF  - Procedia Engineering
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.proeng.2017.09.325
SN  - 1877-7058
VL  - 199
SP  - 3218
EP  - 3223
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Holler, Stefan
T1  - Analysis of cylindrical granular material silos under seismic excitation
JF  - Buildings
N2  - Silos generally work as storage structures between supply and demand for various goods, and their structural safety has long been of interest to the civil engineering profession. This is especially true for dynamically loaded silos, e.g., in case of seismic excitation. Particularly thin-walled cylindrical silos are highly vulnerable to seismic induced pressures, which can cause critical buckling phenomena of the silo shell. The analysis of silos can be carried out in two different ways. In the first, the seismic loading is modeled through statically equivalent loads acting on the shell. Alternatively, a time history analysis might be carried out, in which nonlinear phenomena due to the filling as well as the interaction between the shell and the granular material are taken into account. The paper presents a comparison of these approaches. The model used for the nonlinear time history analysis considers the granular material by means of the intergranular strain approach for hypoplasticity theory. The interaction effects between the granular material and the shell is represented by contact elements. Additionally, soil–structure interaction effects are taken into account.
KW  - granular silo
KW  - earthquake engineering
KW  - hypoplasticity
KW  - nonlinear transient analyses
Y1  - 2017
U6  - http://dx.doi.org/10.3390/buildings7030061
SN  - 2075-5309
VL  - 7
IS  - 3
SP  - 1
EP  - 12
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Rajan, S.
A1  - Butenweg, Christoph
A1  - Dalguer, L. A.
A1  - An, J. H.
A1  - Renault, P.
A1  - Klinkel, S.
T1  - Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013
T2  - 16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
Y1  - 2017
N1  - Paper No 2119
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Rajan, Sreelakshmy
A1  - Kubalski, Thomas
A1  - Altay, Okyay
A1  - Dalguer, Luis A
A1  - Butenweg, Christoph
T1  - Multi-dimensional fragility analysis of a RC building with components using response surface method
T2  - 24th International Conference on Structural Mechanics in Reactor Technology, Busan, Korea, 20-25 August, 2017
N2  - Conventional fragility curves describe the  vulnerability of the  main  structure under  external  hazards. However, in complex structures such as nuclear power plants, the safety or the risk depends also on the components associated with a system. The classical fault tree analysis gives an overall view of the failure and contains several subsystems to the main event, however, the interactions in the subsystems are not well  represented.  In  order  to  represent  the  interaction  of  the  components,  a  method  suggested  by Cimellaro et al. (2006) using multidimensional performance limit state functions to obtain the  system fragility curves is adopted. This approach gives the possibility of deriving the cumulative fragility taking into account the interaction of the response of different components. In this paper, this approach is used to evaluate seismic risk of a representative electrical building infrastructure, including the component, of a nuclear power plant. A simplified model of the structure, with nonlinear material behavior is employed for  the  analysis  in  Abaqus©. The  input  variables  considered  are  the  material parameters,  boundary conditions and the seismic input. The variability of the seismic input is obtained from selected ground motion time histories of  spectrum compatible  synthetic ccelerograms.  Unlike the  usual Monte  Carlo methods used for the probabilistic analysis of the structure, a computationally effective response surface method is used. This method reduces the computational effort of the calculations by reducing the required 
number of samples.
Y1  - 2017
SN  - 9781510856776
SP  - 3126
EP  - 3135
PB  - International Assn for Structural Mechanics in Reactor Technology (IASMiRT)
CY  - Raleigh, USA
ER  - 
TY  - JOUR
A1  - Giresini, Linda
A1  - Sassu, Mauro
A1  - Butenweg, Christoph
A1  - Alecci, Valerio
A1  - De Stefano, Mario
T1  - Vault macro-element with equivalent trusses in global seismic analyses
JF  - Earthquakes and Structures
N2  - This paper proposes a quick and simplified method to describe masonry vaults in global seismic analyses of buildings. An equivalent macro-element constituted by a set of six trusses, two for each transverse, longitudinal and diagonal direction, is introduced. The equivalent trusses, whose stiffness is calculated by fully modeled vaults of different geometry, mechanical properties and boundary conditions, simulate the vault in both global analysis and local analysis, such as kinematic or rocking approaches. A parametric study was carried out to investigate the influence of geometrical characteristics and mechanical features on the equivalent stiffness values. The method was numerically validated by performing modal and transient analysis on a three naves-church in the elastic range. Vibration modes and displacement time-histories were compared showing satisfying agreement between the complete and the simplified models. This procedure is particularly useful in engineering practice because it allows to assess, in a simplified way, the effectiveness of strengthening interventions for reducing horizontal relative displacements between vault supports.
KW  - vault
KW  - macro-element
KW  - equivalent stiffness
KW  - truss
KW  - churches
Y1  - 2017
U6  - http://dx.doi.org/10.12989/eas.2017.12.4.409
SN  - 2092-7614 (Print)
SN  - 2092-7622 (Online)
VL  - 12
IS  - 4
SP  - 409
EP  - 423
PB  - Techno-Press
CY  - Taejŏn
ER  - 
TY  - JOUR
A1  - Edip, K.
A1  - Sesov, V.
A1  - Butenweg, Christoph
A1  - Bojadjieva, J.
T1  - Development of coupled numerical model for simulation of multiphase soil
JF  - Computers and Geotechnics
N2  - In this paper, a coupled multiphase model considering both non-linearities of water retention curves and solid state modeling is proposed. The solid displacements and the pressures of both water and air phases are unknowns of the proposed model. The finite element method is used to solve the governing differential equations. The proposed method is demonstrated through simulation of seepage test and partially consolidation problem. Then, implementation of the model is done by using hypoplasticity for the solid phase and analyzing the fully saturated triaxial experiments. In integration of the constitutive law error controlling is improved and comparisons done accordingly. In this work, the advantages and limitations of the numerical model are discussed.
Y1  - 2018
U6  - http://dx.doi.org/10.1016/j.compgeo.2017.08.016
SN  - 0266-352X
VL  - 96
SP  - 118
EP  - 131
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Michel, Philipp
A1  - Butenweg, Christoph
A1  - Kinkel, Sven
T1  - Pile-grid foundations of onshore wind turbines considering soil-structure-interaction under seismic loading
JF  - Soil Dynamics and Earthquake Engineering
N2  - In recent years, many onshore wind turbines are erected in seismic active regions and on soils with poor load bearing capacity, where pile grids are inevitable to transfer the loads into the ground. In this contribution, a realistic multi pile grid is designed to analyze the dynamics of a wind turbine tower including frequency dependent soil-structure-interaction. It turns out that different foundations on varying soil configurations heavily influence the vibration response. While the vibration amplitude is mostly attenuated, certain unfavorable combinations of structure and soil parameters lead to amplification in the range of the system's natural frequencies. This testifies the need for overall dynamic analysis in the assessment of the dynamic stability and the holistic frequency tuning of the turbines.
Y1  - 2018
U6  - http://dx.doi.org/10.1016/j.soildyn.2018.03.009
SN  - 0267-7261
VL  - 109
SP  - 299
EP  - 311
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Boesen, Niklas
A1  - Gellert, Christoph
T1  - Evaluation of the Seismic Behavior of a Modern URM Building During the 2012 Northern Italy Earthquakes
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Anic, Filip
A1  - Penava, Davorin
A1  - Guljas, Ivica
A1  - Sarhosis, Vasilis
A1  - Abrahamczyk, Lars
A1  - Butenweg, Christoph
T1  - The Effect of Openings on Out-of-Plane Capacity of Masonry Infilled Reinforced Concrete Frames
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 10168
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Milkova, Kristina
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Dumova-Jovanoska, Elena
T1  - Development of Seismic Vulnerability Curves for Region Specific Masonry Buildings
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 10522
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Schmitt, Timo
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic Impact And Design Of Buried Pipelines
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
N2  - Seismic design of buried pipeline systems for energy and water supply is not only important for plant and operational safety but also for the maintenance of the supply infrastructure after an earthquake. The present paper shows special issues of the seismic wave impacts on buried pipelines, describes calculation methods, proposes approaches and gives calculation examples. This paper regards the effects of transient displacement differences and resulting tensions within the pipeline due to the wave propagation of the earthquake. However, the presented model can also be used to calculate fault rupture induced displacements. Based on a three-dimensional Finite Element Model parameter studies are performed to show the influence of several parameters such as incoming wave angle, wave velocity, backfill height and synthetic displacement time histories. The interaction between the pipeline and the surrounding soil is modeled with non-linear soil springs and the propagating wave is simulated affecting the pipeline punctually, independently in time and space. Special attention is given to long-distance heat pipeline systems. Here, in regular distances expansion bends are arranged to ensure movements of the pipeline due to high temperature. Such expansion bends are usually designed with small bending radii, which during the earthquake lead to high bending stresses in the cross-section of the pipeline. Finally, an interpretation of the results and recommendations are given for the most critical parameters.
Y1  - 2018
N1  - Paper No 10600
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Michel, Philipp
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Frequency Dependent Impedance Analysis of the Foundation-Soil-Systems of Onshore Wind Turbines
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11440
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
A1  - Fehling, Ekkehard
A1  - Pfetzing, Thomas
A1  - Kubalski, Thomas
T1  - Experimental and Numerical Investigations of Reinforced Concrete Frames with Masonry Infills under Combined In- and Out-of-plane Seismic Loading
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11477
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Innovative System for Earthquake Resistant Masonry Infill Walls
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11479
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Cacciatore, Pamela
A1  - Boesen, Niklas
T1  - Investigation of the seismic performance of modern masonry buildings during the Emilia Romagna  earthquake  series
T1  - Untersuchungen des seismischen Verhaltens von  modernen Mauerwerksbauten während der  Erdbebenserie in der Emilia Romagna
JF  - Mauerwerk
N2  - The article presents the investigation of the seismic behaviour of a modern URM building located in the municipality of Finale Emilia in province of Modena, Northern Italy. The building is situated in the centre of the series of the 2012 Northern Italy earthquakes and has not suffered any damage during the earthquake series in 2012. The observed earthquake resistance of the building is compared with predicted resistances based on linear and nonlinear design approaches according to Eurocode. Furthermore, probabilistic analyses based on nonlinear calculation models taking into account scattering of the most relevant input parameters are carried out to identify their influence to the results and to derive fragility curves.
Y1  - 2018
U6  - http://dx.doi.org/10.1002/dama.201800013
SN  - 1437-1022
VL  - 22
IS  - 4
SP  - 238
EP  - 250
PB  - Ernst & Sohn
CY  - Berlin
ER  -