TY  - JOUR
A1  - Haselgruber, Nikolaus
A1  - Mautner, Karin
A1  - Thiele, Jan
T1  - Usage Space Analysis for Reliability Testing
JF  - Quality and Reliability Engineering International
N2  - During the development process of a complex technical product, one widely used and important technique is accelerated testing where the applied stress on a component is chosen to exceed the reference stress, i.e. the stress encountered in field operation, in order to reduce the time to failure. For that, the reference stress has to be known. Since a complex technical product may fail regarding numerous failure modes, stress in general is highly dimensional rather than scalar. In addition, customers use their products individually, i.e. field operation should be described by a distribution rather than by one scalar stress value. In this paper, a way to span the customer usage space is shown. It allows the identification of worst case reference stress profiles in significantly reduced dimensions with minimal loss of information. The application example shows that even for a complex product like a combustion engine, stress information can be compressed significantly. With low measurement effort it turned out that only three reference stress cycles were sufficient to cover a broad range of customer stress variety.
Y1  - 2010
U6  - http://dx.doi.org/10.1002/qre.1155
SN  - 1099-1638
N1  - Special Issue: Business and Industrial Statistics: Developments and Industrial Practices in Quality and Reliability
VL  - 26
IS  - 8
SP  - 877
EP  - 885
PB  - Wiley
CY  - New York
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Baier, M.
T1  - Energetic and operational use of FlexCargoRail freight wagons in the single wagon load traffic / Baier, M. ; Enning, M.
JF  - Towards zero emission : EVS 24, the 24th  International  Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert Stüssi [Hrsg.]
Y1  - 2009
N1  - European Association of Electric Road Vehicles ; EVS ; (24 : ; 2009.05.13-16 : ; Stavanger)
CY  - Stavanger
ER  - 
TY  - CHAP
A1  - Chudoba, Rostislav
A1  - Konrad, Martin
A1  - Schleser, Markus
A1  - Meskouris, Konstantin
A1  - Reisgen, Uwe
ED  - Curbach, Manfred
T1  - Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns
T2  - Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009
Y1  - 2009
SN  - 978-3-86780-122-5
SP  - 87
EP  - 98
PB  - Techn. Univ.
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Gries, Thomas
A1  - Glowania, Michael
T1  - Impregnated textile reinforcements for concrete applications
T2  - European Coatings Congress : Nürnberg, Germany, 30.3. - 1.4. 2009
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Amdrej V.
ED  - Turichin, G.
T1  - Measurement method of electron beam plasma parameters by non-vacuum electron beam welding
T2  - Beam technologies & laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009
Y1  - 2009
SP  - 259
EP  - 267
PB  - Politechnical Univ.
CY  - Saint Petersburg
ER  - 
TY  - JOUR
A1  - Pfaff, Raphael
A1  - Burnham, Keith J.
T1  - On abstraction and interpretability: a behavioural perspective
JF  - Systems Science
Y1  - 2009
SN  - 0137-1223
VL  - Vol. 35
IS  - Iss. 2
SP  - 19
EP  - 26
ER  - 
TY  - JOUR
A1  - Seiler, Friedrich
A1  - Pichler, Alexander
A1  - Pfaff, Raphael
A1  - Srulijes, Julio
T1  - Novel processing tools for automated doppler picture velocimetry (DPV) evaluation
JF  - Journal of visualization
Y1  - 2009
SN  - 1343-8875
VL  - Vol. 12
IS  - Iss. 4
SP  - 323
EP  - 337
ER  - 
TY  - CHAP
A1  - Buschkühle, Peter
A1  - Schürmann, Volker
A1  - Wollert, Jörg
T1  - Abstraction of wireless communication by a convergence middleware in conjunction with a XML-configuration
T2  - Information technology and electrical engineering : devices and systems, materials and technologies for the future ; Ilmenau 07 - 10 September 2009 ; 54. IWK Internationales Wissenschaftliches Kolloquium
Y1  - 2009
SN  - 978-3-938843-44-4
SP  - 95
EP  - 96
PB  - Techn. Univ.
CY  - Ilmenau
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Keller, Alex
A1  - Wollert, Jörg
T1  - Internet based middleware approach for building services
T2  - Proceedings / IMETI 2009, the 2nd International Multi-Conference on Engineering and Technological Innovation : July 10 - 13, 2009 Orlando, Florida, USA ; vol. 1
Y1  - 2009
SN  - 1-934272-68-X ; 978-1-934272-68-8
SP  - 30
EP  - 34
PB  - IIIS
CY  - Winter Garden, Fla.
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Mann, Thorsten
A1  - Buda, Aurel
A1  - Wollert, Jörg
T1  - Integrating bluetooth localization into existing TCP/IP networks
T2  - IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2009 : IDAACS 2009 ; Rende, Cosenza, Italy, 21 - 23 Sept. 2009
Y1  - 2009
SN  - 978-1-4244-4882-1 ; ISBN: 978-1-4244-4901-9
U6  - http://dx.doi.org/10.1109/IDAACS.2009.5342903
SP  - 621
EP  - 624
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - GEN
A1  - Kämper, Klaus-Peter
T1  - Lecture notes Sensors and Actuators WS 2008/2009
N2  - Password necessarily. Access only for Students by Prof. Dr. Klaus-Peter Kämper. Winter semester 2008/2009. 488 pages (pdf) Contents 1. Introduction 2. Introduction to Sensors 3. Introduction to Microfabrication 4. Pressure Sensors 5. Acceleration Sensors 6. Angular Rate Sensors 7. Position Sensors 8. Flow Sensors 9. Piezoelectric Actuators 10. Magnetostrictive Actuators 11. Actuators based on Shape Memory Alloys 12. Actuators based on Electrorheological Fluids 13. Actuators based on Magnetorheological Fluids 14. Index
N2  - Kennwortgeschützter Zugang nur für Studierende bei Prof. Dr. Klaus-Peter Kämper. Wintersemester 2008/2009. 488 Seiten (pdf-Format)
KW  - Sensor
KW  - Aktor
KW  - Sensoren
KW  - Aktoren
KW  - Sensores
KW  - Actuators
KW  - Microfabrication
Y1  - 2008
ER  - 
TY  - JOUR
A1  - Mautner, Karin
A1  - Forster, Ralf
A1  - Kornhuber, Ralf
A1  - Sander, Oliver
T1  - Fast and Reliable Pricing of American Options with Local Volatility / Forster, Ralf ; Kornhuber, Ralf ; Mautner, Karin ; Sander, Oliver
JF  - Domain Decomposition Methods in Science and Engineering XVII
Y1  - 2008
SN  - 978-3-540-75198-4
N1  - Lecture Notes in Computational Sciece and Engineering ; 60
SP  - 383
EP  - 390
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, Radoslav
A1  - Rossi, Massimiliano
A1  - Morbiducci, Umberto
T1  - PIV Measurements of Flows in Artificial Heart Valves / Kaminsky, Radoslav ; Kallweit, Stephan ; Rossi, Massimiliano ; Morbiducci, Umberto ; Scalise, Lorenzo
JF  - Particle Image Velocimetry - New Developments and Recent Applications
Y1  - 2008
SN  - 978-3-540-73528-1
N1  - Topics in Applied Physics
SP  - 55
EP  - 72
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Willert, Chris
A1  - Dues, Michael
A1  - Müller, Ulrich
T1  - PIV for Volume Flow Metering / Kallweit, Stephan ; Willert, Chris ; Dues, Michael ; Müller, Ulrich ; Lederer, Thomas
Y1  - 2008
N1  - 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2008-07-07 - 2008-07-10, Lisbon (Portugal)
SP  - 6 S.
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts
JF  - Cement and concrete composites
Y1  - 2008
SN  - 0958-9465
VL  - Vol. 30
IS  - iss. 2
SP  - 82
EP  - 87
ER  - 
TY  - CHAP
A1  - Seiler, Friedrich
A1  - Pichler, Alexander
A1  - Pfaff, Raphael
A1  - George, Alfred
A1  - Srulijes, Julio
T1  - Improved Doppler picture velocimetry and new automated processing
T2  - 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics : Lisbon, Portugal, 7 - 10 July 2008
Y1  - 2008
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Burnham, Keith J.
T1  - On abstraction and interpretability: a behavioural perspective
T2  - 19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada
Y1  - 2008
SN  - 978-0-7695-3331-5 ; 978-0-7695-2719-2
SP  - 89
EP  - 94
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Schürmann, Volker
A1  - Buda, Aurel
A1  - Wollert, Jörg
T1  - XML-based Middleware approach for industrial wireless communication systems
T2  - IEEE International Conference on Emerging Technologies and Factory Automation, 2008 : ETFA 2008 ; 15 - 18 Sept., 2008, Hamburg, Germany
Y1  - 2008
SN  - 978-1-4244-1505-2
U6  - http://dx.doi.org/10.1109/ETFA.2008.4638463
SP  - 632
EP  - 639
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Vanlanduit, S.
A1  - Vanherzeele, J.
A1  - Brouns, M.
T1  - Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.
JF  - PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007
Y1  - 2007
N1  - PIV, Internional Symposium on Particle Image Velocimetry, 7 ; Datei: Vanlanduit.pdf
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Chudoba, Rostislav
A1  - Konrad, Martin
ED  - Triantafillou, T. C.
T1  - Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics
T2  - Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007
Y1  - 2007
SN  - 9608969107
SP  - 456
EP  - 457
PB  - Univ.
CY  - Patras
ER  - 
TY  - CHAP
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
A1  - Mund, F.
A1  - Böhm, Stefan
ED  - Czarnecki, Lech
ED  - Garbacz, Andrzej
T1  - Improvement of textile reinforced concrete by use of polymers
T2  - Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)
Y1  - 2007
SN  - 978-3-931681-89-0
SP  - 153
EP  - 162
PB  - Aedificatio Publ.
CY  - Freiburg
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Hegger, Josef
A1  - Voss, Stefan
ED  - Reinhardt, Hans W.
T1  - Load-bearing behaviour of polymer-impregnated textiles in concrete
T2  - Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)
Y1  - 2007
SN  - 978-2-35158-046-2
SP  - 183
EP  - 192
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Puterman, Moshe
T1  - Investigation and improvement of concrete reinforced with epoxy impregnated fabrics
T2  - Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007
Y1  - 2007
SN  - 978-89-9600450-9
SP  - 725
EP  - 733
PB  - Kangwoon National Univ.
CY  - Chancheon
ER  - 
TY  - THES
A1  - Pfaff, Raphael
T1  - Automated processing of the ISL Doppler images
Y1  - 2007
N1  - Hagen, Fernuniv., Bachelorarbeit, 2007
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Pichler, Alexander
A1  - George, Alfred
A1  - Seiler, Friedrich
T1  - Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007
T2  - PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620
Y1  - 2007
SP  - 1
EP  - 10
PB  - ISL
CY  - Saint Louis, France
ER  - 
TY  - GEN
A1  - Kämper, Klaus-Peter
T1  - Lecture notes Sensors and Actuators
N2  - Kennwortgeschützter Zugang nur für Studierende bei Prof. Dr. Klaus-Peter Kämper. Wintersemester 2007/2008. Version vom 30.08.2007. 472 Seiten (pdf-Format)
N2  - Password necessarily. Access only for Students by Prof. Dr. Klaus-Peter Kämper. Winter semester 2007/2008. Version 2007-08-30. 472 pages (pdf) Contents 1. Introduction 2. Introduction to Sensors 3. Introduction to Microfabrication 4. Pressure Sensors 5. Acceleration Sensors 6. Angular Rate Sensors 7. Position Sensors 8. Flow Sensors 9. Piezoelectric Actuators 10. Magnetostrictive Actuators 11. Actuators based on Shape Memory Alloys 12. Actuators based on Electrorheological Fluids 13. Actuators based on Magnetorheological Fluids
KW  - Sensor
KW  - Aktor
KW  - Sensoren
KW  - Aktoren
KW  - Sensores
KW  - Actuators
KW  - Microfabrication
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Kruse, Thomas
A1  - Wollert, Jörg
T1  - Development and performance evaluation of an antenna diversity module for industrial communication based on IEEE 802.15.4
T2  - 12th IEEE International Conference on Emerging Technologies and Factory Automation : ETFA 2007 : proceedings : 25-28 Sept. 2007, Patras, Greece
Y1  - 2007
SN  - 1424408261 ; 9781424408269
U6  - http://dx.doi.org/10.1109/EFTA.2007.4416769
SP  - 177
EP  - 186
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Buda, Aurel
A1  - Jozenfini, B.
A1  - Wollert, Jörg
T1  - Mobile ad-hoc Network for home automation based on ZigBee application framework
T2  - 1st European ZigBee Developer's Conference : June 18 - 20, 2007, Munich, Germany
Y1  - 2007
SP  - 1
EP  - 5
PB  - Design & Elektronik
CY  - Poing
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, A.
A1  - Schütze, A.
A1  - Wallach, D.
T1  - Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; Kämper, K.-P.; Schütze, A.; Wallach, D.; Walter, T.
JF  - Mst-News (2006)
Y1  - 2006
SN  - 0948-3128
SP  - 15, 16
EP  - u. 35
ER  - 
TY  - BOOK
A1  - Mautner, Karin
T1  - Numerical treatment of the Black-Scholes variational inequality in computational finance
Y1  - 2006
N1  - Humboldt-Univ., Diss
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Stützle, Thorsten
A1  - Viereck, Uwe
A1  - Stribersky, Anton
T1  - Creepage control for use in wheelslide protection systems / Stützle, Thorsten ; Viereck, Uwe ; Stribersky, Anton ; Rulka, Wolfgang ; Enning, Manfred ; Abel, Dirk
JF  - Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control
Y1  - 2006
SN  - 0742-5953
ER  - 
TY  - CHAP
A1  - Raupach, Michael
A1  - Orlowsky, Jeannette
A1  - Büttner, T.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Hegger, Josef
T1  - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 77
EP  - 88
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Pak, Daniel
A1  - Piegeler, D.
A1  - Feldmann, Markus
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
ED  - Hegger, Josef
T1  - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 181
EP  - 190
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Barroso de Aguiar, Jose
ED  - Jalali, Said
ED  - Camoes, Aires
ED  - Ferrera, Rui Miguel
T1  - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles
T2  - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal
Y1  - 2006
SN  - 972-99179-1-4
SP  - 185
EP  - 192
PB  - Universidade do Minho, Departamento de Engenharia Civil
CY  - Guimarães
ER  - 
TY  - JOUR
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilthey, Ulrich
T1  - Application of polymers for textile-reinforced concrete
JF  - Journal of materials in civil engineering : properties, applications, durability
Y1  - 2006
SN  - 0899-1561
VL  - 18
IS  - 5
SP  - 670
EP  - 676
ER  - 
TY  - JOUR
A1  - Feldmann, Markus
A1  - Pak, Daniel
A1  - Geßler, Achim
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - Bonded connections for textile reinforced concrete structures
JF  - Cailiao-gongcheng = Journal of materials engineering
Y1  - 2006
SN  - 1001-4381
IS  - Special iss.
SP  - 123
EP  - 127
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Möller, M.
A1  - Weichhold, O.
ED  - Hegger, Josef
T1  - Application of polymers in textile reinforced concrete : from the interface to construction elements
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 55
EP  - 64
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - THES
A1  - Pfaff, Raphael
T1  - Modelling of nonlinear systems using piecewise defined models
Y1  - 2006
N1  - Coventry, Univ., Masterarbeit, 2006
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Vinsonneau, B.
A1  - Burnham, K. J.
T1  - Multiple models for nonlinear systems
T2  - Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]
Y1  - 2006
SN  - 1-84600-013-0
SP  - 347
EP  - 352
ER  - 
TY  - CHAP
A1  - Merten, Sabine
A1  - Conrad, Thorsten
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Schütze, Andreas
T1  - Virtual Technology Labs - an efficient tool for the preparation of hands-on-MEMS-courses in training foundries
N2  - Hands-on-training in high technology areas is usually limited due to the high cost for lab infrastructure and equipment. One specific example is the field of MEMS, where investment and upkeep of clean rooms with microtechnology equipment is either financed by production or R&D projects greatly reducing the availability for education purposes. For efficient hands-on-courses a MEMS training foundry, currently used jointly by six higher education institutions, was established at FH Kaiserslautern. In a typical one week course, students manufacture a micromachined pressure sensor including all lithography, thin film and packaging steps. This compact and yet complete program is only possible because participants learn to use the different complex machines in advance via a Virtual Training Lab (VTL). In this paper we present the concept of the MEMS training foundry and the VTL preparation together with results from a scientific evaluation of the VTL over the last three years.
KW  - Virtuelles Laboratorium
KW  - Virtuelles Labor
KW  - Hand-on-training
KW  - Virtual Technology Lab
KW  - MEMS ; education and training foundry
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
T1  - Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006
N2  - Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education – Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education – Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company – Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone – Set up your own business 2.5 Level 5: Grow to be Strong – Develop your business 2.6 Level 6: Competitive and independent – Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion
KW  - Technologietransfer
KW  - technology transfer
KW  - technology diffusion
Y1  - 2006
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Generative Manufacturing of Ceramic Parts "Vision Rapid Prototyping"
N2  - Table of Contents Introduction 1. Generative Manufacturing Processes 2. Classification of Generative Manufacturing Processes 3. Application of Generative Processes on the Fabrication of Ceramic Parts 3.1 Extrusion 3.2 3D-Printing 3.3 Sintering – Laser Sintering 3.4 Layer-Laminate Processes 3.5 Stereolithography (sometimes written: Stereo Lithography) 4. Layer Milling 5. Conclusion - Vision
KW  - Rapid prototyping
KW  - Rapid Technologie
KW  - Rapid Prototyping
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
A1  - Buda, A.
A1  - Altrock, R.
T1  - The capability of bluetooth for real-time transmission in automation
T2  - Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand
Y1  - 2006
SP  - 168
EP  - 175
PB  - Acta Pr.
CY  - Anaheim, Calif.
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Zambou, N.
A1  - Abel, D.
T1  - Longitudinal Control of Following Vehicles within Platoon : A Model-Based Predictive Approach / Zambou, N. ; Enning, M. ; Abel, D.
JF  - Advances in automotive control 2004 : a proceedings volume from the IFAC symposium, Salerno, Italy, 19 - 23 April 2004 / ed. C. Pianese
Y1  - 2005
SN  - 0080442501
N1  - International Federation of Automatic Control ; Symposium on Advances in Automotive Control ; (4, 2004, Salerno)
SP  - 733
EP  - 738
PB  - Elsevier
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 946
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - 2D PIV Study of the flow downstream : Two prototypes of a ney monoleaflet artificial aortic heart valve prosthesis / Kaminsky, R. ; Kramm, K. ; Weber, H. J. ; Simons, A. P. ; Kallweit, S. ; Verdonck, P. R.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 921
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - 3D PIV measurements of prosthetic heart valve dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Castellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 868
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Scalise, L.
T1  - PIV Measurements with high temporal Resolution behind Artificial  Heart Valves  / Kaminsky, R. ; Rossi, M. ; Scalise, L. ; Kallweit, S. ; Verdonck, P.
JF  - Proceedings of the 6th International Symposium on Particle Image Velocimetry
Y1  - 2005
N1  - link zum abstract
PB  - Caltech
CY  - Pasadena, CA
ER  - 
TY  - CHAP
A1  - Kolkmann, Annette
A1  - Gries, Thomas
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
T1  - Innovative yarn structures and coatings for textile reinforced concrete
T2  - All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main
Y1  - 2005
CY  - Frankfurt a.M.
ER  - 
TY  - GEN
A1  - Gebhardt, Andreas
T1  - Short course on rapid prototyping
N2  - Rapid Prototyping Technology: Types of models, rapid prototyping processes, prototyper Fundamentals of rapid prototyping Industrial rapid prototyping technology: Stereolithography, (Selective) laser sintering ((S)LS), Layer laminate manufacturing (LLM), Fused layer modeling (FLM), Three dimensional printing (3DP)
KW  - Rapid Prototyping
KW  - Rapid Prototyping
Y1  - 2005
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
T1  - Service based Bluetooth dual-hop networks using CORBA
T2  - Proceedings of the IASTED International Conference on Artificial Intelligence and Applications : as part of the 23rd IASTED International Multi-Conference on Applied Informatics ; February 14 - 16, 2005, Innsbruck, Austria
Y1  - 2005
SN  - 0-88986-457-8
SP  - 724
EP  - 728
PB  - Acta Pr.
CY  - Anaheim, Calif.
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Rapid Prototyping
JF  - Landolt-Börnstein - Group VIII Advanced Materials and Technologies‡Vol. 1 Laser Physics and Applications‡Subvol. C  Laser Applications / authors: Bäuerle, D.  ...
Y1  - 2004
SN  - 3-540-00105-0
SP  - 105
EP  - 123
PB  - Heidelberg
CY  - Springer
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Zambou, Nathan
A1  - Abel, Dirk
T1  - Nonlinear spacing control of following vehicles within platoon a controlled lagrangian approach / Zambou, Nathan ; Enning, Manfred ; Abel, Dirk
JF  - NOLCOS, IFAC Symposium on Nonlinear Control Systems
Y1  - 2004
N1  - NOLCOS, 2004, IFAC Symposium on Nonlinear Control Systems, 6th, Stuttgart, DE, 2004-09-01 - 2004-09-03
SP  - 1211
EP  - 1216
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Mund, F.
A1  - Raupach, Michael
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
T1  - Improvement of textile reinforced concrete by polymer additives
T2  - ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch
Y1  - 2004
SN  - 3-00-013706-8
SP  - 469
EP  - 476
PB  - BAM
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Brandenburg, Annette
A1  - Schleser, Markus
T1  - Dispensing and application of unfilled adhesives in the micro range
JF  - Welding and cutting. 3 (2004), H. 4
Y1  - 2004
SN  - 1612-3433
SP  - 250
EP  - 254
ER  - 
TY  - CHAP
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilger, Klaus
A1  - Böhm, Stefan
A1  - Mundt, F.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete
T2  - Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Università degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction
Y1  - 2004
SP  - 150
EP  - 159
PB  - Liguori
CY  - Napoli
ER  - 
TY  - BOOK
A1  - Gebhardt, Andreas
T1  - Rapid Prototyping
Y1  - 2003
SN  - 3-446-21259-0
PB  - Hanser
CY  - Munich [u.a.]
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Brill, Manfred
A1  - Cassel, Detlef (u.a.)
T1  - The Virtual Cleanroom – a new tool in teaching MST process technologies
JF  - mst news International newsletter on micro - nano Integration (2003)
Y1  - 2003
SN  - 0948-3128
SP  - 35
EP  - 36
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
T1  - Education and Training in MST. Kämper, K.-P.; Picard, A.; Brill, M.; Cassel, D.; Jentsch, A.; Merten, S.; Rollwa, M.
JF  - Mst-News (2003)
Y1  - 2003
SN  - 0948-3128
SP  - 35
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Mann, S.
A1  - Bollig, A.
A1  - Kaierle, S.
T1  - Autonomous Production Cell for Laser Beam Welding / Mann S. ; Bollig, A. ; Kaierle, S. ; Abel, D. ; Poprawe, R.
Y1  - 2003
SN  - 0912035757
N1  - ICALEO 2003, Florida  ; Laser Materials Processing Conference ; (2003, Jacksonville, Fla.) ; ICALEO ; (22, 2003, Jacksonville, Fla.)
PB  - LIA
CY  - Orlando, Fla
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Schimpf, Axel
T1  - Photogrammetric Particle Image Velocimetry / Schimpf, Axel ; Kallweit, Stephan
JF  - Particle image velocimetry : recent improvements; proceedings of the Europiv 2 Workshop held in Zaragoza, Spain, March 31 - April 1, 2003 / edited by M. Stanislas ...
Y1  - 2003
SN  - 3-540-21423-2
SP  - 295
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Sedlacek, G.
A1  - Geßler, A.
A1  - Schleser, Markus
A1  - Mund, F.
A1  - Völling, B.
T1  - Verbindungen vorgefertigter Textilbetonbauteile
T2  - Textile reinforced structures : proceedings of the 2nd Colloquium on Textile Reinforced Structures (CTRS2), Dresden, Germany, 29.9. - 1.10.2003
Y1  - 2003
SN  - 3-86005-386-8
SP  - 481
EP  - 493
PB  - Techn. Univ.
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Brill, Manfred
A1  - Cassel, Detlev
A1  - Jentsch, Andreas
A1  - Merten, Sabine
A1  - Rollwa, Markus
T1  - The Virtual Clean Room - a new tool in teaching MST process technologies
N2  - The Virtual Clean Room - a new tool in teaching MST process technologies University education in high-technology fields like MST is not complete without intensive laboratory sessions. Students cannot fully grasp the complexity and the special problems related to the manufacturing of microsystems without a thorough hands-on experience in a MST clean room.
KW  - Virtuelle Maschine
KW  - VM
KW  - Mikrosystemtechnik
KW  - MST
KW  - virtual clean room
Y1  - 2003
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Schmidt, Frank-Michael
T1  - Practical experiences with making and finishing of coloured models using 3D printing
Y1  - 2002
N1  - International Conference on Rapid Prototyping and Manufacturing <2, 2002, Beijing>
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Rapid Prototyping and PIV
Y1  - 2001
N1  - Workshop on Industrial Applications of Particle Image Velocimetry <2001, Köln>
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Laserwelding with fillerwire
JF  - LIA handbook of laser material processing / Laser Institute of America
Y1  - 2001
SN  - 3-540-41770-2
N1  - Chapter 11.2.12
CY  - Orlando, Florida
ER  - 
TY  - BOOK
A1  - Gebhardt, Andreas
T1  - Rapid prototyping : Werkzeug für die schnelle Produktentstehung. - 2., völlig überarb. Aufl.
Y1  - 2000
SN  - 3-446-21242-6
PB  - Hanser
CY  - München [u.a.]
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Hücker, Jan
A1  - Jenayeh, Imad
A1  - Rake, Heinrich
T1  - A Parametric Identification Scheme for a Self-tuning Industrial Compact Controller - INTERKAMA 1999 / Hucker, Jan ; Jenayeh, Imad ; Enning, Manfred ; Rake, Heinrich
Y1  - 1999
N1  - ISA TP99UN139 ; Proceedings ISA-Tech Conference, Düsseldorf 1999
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Berg, U.
A1  - Begemann, M.
A1  - Hagemann, B. (u.a.)
T1  - Series production and testing of a micro motor. Serienfertigung und Prüfung eines Mikromotors
JF  - Actuator 98 : 6th International Conference on New Actuators ; 17 - 19 June, 1998, Bremen, Germany ; conference proceedings / ed.: Hubert Borgmann ...
Y1  - 1998
SN  - 3-933339-00-6
N1  - Konferenz-Einzelbericht: ACTUATOR, Internat. Conf. on New Actuators
SP  - 552
EP  - 555
PB  - Messe Bremen
CY  - Bremen
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Ehrfeld, W.
A1  - Oberbeck, S.
T1  - A self-filling low-cost membrane micropump
JF  - Proceedings : an investigation of micro structures, sensors, actuators, machines and systems / sponsored by the IEEE Robotics and Automation Society in cooperation with the ASME Dynamic Systems and Control Division
Y1  - 1998
SN  - 078034412X
N1  - International Workshop on Micro-Electro-Mechanical Systems <11, 1998, Heidelberg>
SP  - 432
EP  - 437
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Abraham, M.
A1  - Ehrfeld, W.
A1  - Hessel, V.
T1  - Microsystem technology: Between research and industrial application. Abraham, M.; Ehrfeld, W.; Hessel, V.; Kämper, K.-P.; Lacher, M.; Picard, A.
JF  - Microelectronic Engineering. 41-42 (1998)
Y1  - 1998
SN  - 0167-9317
N1  - International Conference on Micro- and Nanofarbication <Athens, Greece, 15 September - 18 September 1998>
SP  - 47
EP  - 52
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Jenayeh, I.
A1  - Müller, C.
A1  - Kositza, N.
T1  - Mechatronics in automating shunting processes in marshalling yards / Jenayeh, I. ; Müller, C.; Kositza, N. ; Enning, M. ; Rake, H.
JF  - Mechatronics  '98 : proceedings of the 6th UK Mechatronics Forum International Conference, Skövde, Sweden, 9-11 September 1998
Y1  - 1998
SN  - 0-08-043339-1
N1  - UK Mechatronics Forum International Conference (6 : 1998  : Skövde)
PB  - Pergamon
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Jenayeh, I.
A1  - Müller, C.
A1  - Kositza, N.
T1  - A New Approach for Automating Shunting Processes in Marshalling Yards / Jenayeh, I.;  Müller, C. ; Kositza, N. ; Enning, M. ; Rake, H.
JF  - Computational Engineering in Systems Applications : 2nd IMACS International Multiconference CESA'98; [abstracts; Nabeul-Hammamet, Tunisia, April 1 - 4, 1998] / ed. by Pierre Borne
Y1  - 1998
SP  - 338
EP  - 343
PB  - UCIS
CY  - Villeneuve d'Ascq
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Uchiyama, R.
A1  - Siekmann, H.
T1  - Fault Diagnostic Method for Pump Running Conditions Based on Process Modeling and Neural Network / Uchiyama, R. ; Kallweit, S. ; Siekmann, H.
JF  - International Journal of Rotating Machinery. 4 (1998), H. 1
Y1  - 1998
SN  - 1542-3034
SP  - 49
EP  - 59
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Clemens, M.
A1  - Ehrfeld, W.
T1  - Micro gear pumps for dosing of viscous fluids. / Döpper, J. (u.a.)
JF  - Journal of Micromechanics and Microengineering. 7 (1997), H. 3
Y1  - 1997
SN  - 0960-1317
SP  - 230
EP  - 232
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Ehrfeld, W.
A1  - Döpper, J.
A1  - Hessel, V.
T1  - Microfluidic components for biological and chemical microreactors. Kämper, K.-P.; Ehrfeld, W.; Döpper, J.; Hessel, V.; Lehr, H.; Löwe, H.; Richter, T.; Wolf, A.
JF  - Proceedings : an investigation of micro structures, sensors, actuators, machines and robots ; Nagoya, Japan, January 26 - 30, 1997 / IEEE Robotics and Automation Society ...
Y1  - 1997
SN  - 0-7803-3744-1
N1  - International Workshop on Micro-Electro-Mechanical Systems <10, 1997, Nagoya>
SP  - 338
EP  - 343
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Ehrfeld, W.
A1  - Hessel, V.
A1  - Lacher, M.
T1  - Market oriented development and production of microdevices. Ehrfeld, W.; Hessel, V.; Kämper, K.-P.; Lacher, M.; Picard, A.; Schmidt, M.; Schulz, C.
JF  - Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1
Y1  - 1997
SN  - 0-7803-3664-X
SP  - 71
EP  - 79
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - Development of micro and millimotors. Lehr, H.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Michel, F.; Schulz, C.; Thürigen C.
JF  - Minimally Invasive Therapy and Allied Technologies. 6 (1997)
Y1  - 1997
SN  - 1364-5706
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Jenayeh, I.
A1  - Müller, C.
A1  - Rake, Heinrich
T1  - Development and realization of a manipulator for automatic decoupling of freight cars in marshalling yards /  Jenayeh, I. ; Müller, C. ; Enning, Manfred ; Rake, Heinrich ; Peter, J.
Y1  - 1997
N1  - World Congress on Railway Research, Florenz, 16.-19.11.1997, 1997
ER  - 
TY  - BOOK
A1  - Engeln-Müllges, Gisela
A1  - Uhlig, Frank
T1  - Numeric Algorithms with Fortran
Y1  - 1996
SN  - 3-540-60529-0
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - BOOK
A1  - Engeln-Müllges, Gisela
A1  - Uhlig, Frank
T1  - Numerical algorithms with C
Y1  - 1996
SN  - 3-540-60530-0
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Abel, S.
A1  - Döpper, J.
T1  - Microactuators as driving units for microrobotic systems. Herstellung von Mikroaktoren mit dem LIGA-Verfahren für Mikroroboter  / Lehr, H.; Abel, S.; Döpper, J.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Michel, F.; Schulu, c.; Thürigen, C.
JF  - Proceedings of the SPIE - The International Society for Optical Engineering
Y1  - 1996
SN  - 0277-786X
N1  - Konferenz-Einzelbericht.
SP  - 202
EP  - 210
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
T1  - Development of low-cost injection moulded micropumps. Entwicklung von kostengünstigen, mittels Spritzguß hergestellten Mikropumpen / Döpper, J. (u.a.)
JF  - Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH
Y1  - 1996
N1  - Konferenz-Einzelbericht: ACTUATOR, Internat. Conf. on New Actuators, 5
SP  - 37
EP  - 40
CY  - Bremen
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Ehrfeld, W.
A1  - Hagemann, B.
A1  - Lehr, H.
T1  - Electromagnetic permanent magnet micromotor with integrated micro gear box. Kämper, K.-P.; Ehrfeld, W.; Hagemann, B.; Lehr, H.; Michel, F.; Schirling, A.; Thürigen, C.; Wittig, T.
JF  - Actuator 96 : Conference Proceedings ; 5th International Conference on New Actuators ; 26- 28 June, Bremen, Germany / Ed.: Hubert Borgmann. Publ. by: AXON Technology Consult GmbH
Y1  - 1996
N1  - International Conference on New Actuators <5, 1996, Bremen>
SP  - 429
CY  - Bremen
ER  - 
TY  - JOUR
A1  - Klocke, Martina
T1  - Study Units in the CIM-Oriented Study Factory
JF  - Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner
Y1  - 1995
SN  - 3-540-19971-3
SP  - 38
EP  - 51
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Abel, S.
A1  - Ehrfeld, W.
T1  - Assembly of Electromagnetic Milliactuators with LIGA Components. Lehr, H.; Abel, S.; Ehrfeld, W.; Hagemann, B.; Kämper, K.-P.; Michel, F.; Thürigen, C.
JF  - Proceedings 2nd Japan-France Congress on Mechatronics, Takamatsu (Kagawa, Japan) 1.-3. November 1994, 31 (1994)
Y1  - 1995
N1  - 2nd Japan-France Congress on mechatronics (1994 Nov : Takamatsu, Japan)
SP  - 31
EP  - 31
PB  - Fuji Technology Press
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - Simulation supported design of LIGA Microsystems. Kämper, K.-P.; Döpper, J.; Ehrfeld, W.; Hagemann, B.; Hill, S.D.J.; Lehr, H.
JF  - Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey
Y1  - 1995
SN  - 1-85312-390-0
SP  - 3
EP  - 10
PB  - Computational Mechanics Publ.
CY  - Southampton [u.a.]
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - An investigation of computer modelling for micro-injection moulding. Hill, S.D.J.; Kämper, K.-P.; Dasbach, U.; Döpper, J.; Ehrfeld, W.; Kaupert, M.
JF  - Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey
Y1  - 1995
SN  - 1-85312-390-0
SP  - 275
PB  - Computational Mechanics Publ.
CY  - Southampton [u.a.]
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Hagemann, B.
A1  - Lehr, H.
A1  - Michel, F.
T1  - LIGA Example 2: Electromagnetic Micromotor. Hagemann, B.; Kämper, K.-P.; Lehr, H.; Michel, F.; Thürigen, C.
JF  - LIGA technique / Hans-Dieter Bauer (ed.). [Developed by UETP-MEMS, University Training Partnership for Micro-Electro-Mechanical Systems ...]. - 2.ed.
Y1  - 1995
N1  - University Enterprise Training Partnership for Micro-Electro-Mechanical Systems
SP  - 100
EP  - 110
PB  - FSRM
CY  - Neuchatel
ER  - 
TY  - CHAP
A1  - Beer, Stefan
A1  - Haidn, O.J.
A1  - Willms, Herbert
ED  - Carvalho, Maria da Graça
T1  - Control of stoichiometric propellant supply in an H2/O2-spinning reserve system
T2  - Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)
Y1  - 1995
SN  - 2-88124-619-2
SP  - 825
EP  - 838
PB  - Gordon and Breach
CY  - Basel [u.a.]
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Drews, P.
T1  - Le soudage au siecle de l'informatique
JF  - Souder. 18 (1994), H. 6
Y1  - 1994
SN  - 0246-1900
SP  - 33
EP  - 44
ER  - 
TY  - JOUR
A1  - Starke, Günther
T1  - Welding in the century of information technology. Session 1
JF  - Welding in the World. 34 (1994), H. 9
Y1  - 1994
SN  - 0043-2288
SP  - 1
EP  - 20
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Lehr, H.
A1  - Ehrfeld, W.
A1  - Michel, F.
T1  - LIGA Components for the Construction of Milliactuators. Lehr, H.; Ehrfeld, W.; Kämper, K.-P.; Michel, F.; Schmidt, M.
JF  - 1994 IEEE Symposium on Emerging Technologies & Factory Automation : novel disciplines for the next century ; proceedings, November 6 - 10, 1994, Tokyo, Japan / ETFA '94. Hiroyuki Fujita [chairman] ... Sponsored by: Institute of Industrial Science, SEIKEN
Y1  - 1994
SN  - 0780321146
SP  - 43
EP  - 47
CY  - Piscataway, N.J.
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schulz, C.
A1  - Ehrfeld, W.
A1  - Erbel, R.
T1  - LIGA Fabricated Microsystems for Medical and Related Applications. Schulz, C.; Ehrfeld, W.; Erbel, R.; Kämper, K.-P.; Koch, L.; Lehr, H.; Roth, T.
JF  - 3-Day Course on Microengineering in Medicine and Biology and its Applications to Minimally Invasive Techniques for Therapy and Medical Diagnosis : EURO-BME 94; October 5, 6, and 7, 1994, Swiss Federal Institute of Technology, EPFL, Lausanne, Switzerland / [the 1994 EURO-BME Microengineering in Medicine and Biology Training Course. Staff: Christian D. Depeursinge ...]
Y1  - 1994
N1  - Microengineering in Medicine and Biology Training Course 1994, Lausanne
PB  - REPRO EPFL
CY  - Lausanne
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Bernhard, S.
A1  - Rake, H.
T1  - Automation of a laboratory plant for direct casting of thin steel strips / Bernhard, S. ; Enning, M. ; Rake, H.
JF  - Control Engineering Practice. 2 (1994), H. 6
Y1  - 1994
SN  - 0967-0661
SP  - 961
EP  - 967
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Dues, M. W.
A1  - Siekmann, H. E.
T1  - Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps / Dues, M. W. ; Kallweit, S. D. ; Siekmann, H. E.
JF  - Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.
Y1  - 1994
N1  - International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 5, 1994, Kaanapali, Hawaii
SP  - 98
EP  - 112
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Helbing, M.
A1  - Orglmeister, R.
A1  - Siekmann, H. E.
T1  - Image Processing Techniques with Neural Networks for Flow Visualization in Rotating Machinery / Helbing, M. ; Orgimeiste, R. [Orglmeister, R.] ; Kallweit, S. ; Siekmann, H. E. ; Dues, M. ; Cronemeyer, J.
JF  - FLUCOME '94 : the 4th Triennial International Symposium on Fluid Control, Measurement and Visualization; August 29 - September 1, 1994, Toulouse, France, International Congress Centre, DIGORA-Labège / CERT/ONERA. General chairman Patrick Hebrard
Y1  - 1994
SP  - 87
EP  - 94
CY  - Toulouse
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Dues, M.
A1  - Siekmann, H.
T1  - Particle-Image-Velocimetry (PIV) in rotierenden Maschinen / Dues, M. ; Kallweit, S. ; Siekmann, H.
JF  - Lasermethoden in der Strömungsmesstechnik, 3. Fachtagung der Deutschen Gesellschaft für Laser-Anemometrie (GALA), Bremen, DE, 5.-7. Sep, 1994
Y1  - 1994
SN  - 3-8265-0162-4
N1  - Lasermethoden in der Strömungsmesstechnik, Fachtagung, 3
SP  - 19.1
EP  - 19-5
PB  - Shaker
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Dues, M.
A1  - Gebhardt, Andreas
A1  - Kallweit, Stephan
A1  - Scheffler, T.
A1  - Siekmann, H.
A1  - Uchiyama, T.
T1  - Flow Visualization in a Cavitating Flow
JF  - Proceedings of the German-Japanese Symposium on Multi-Phase Flow : Karlsruhe, Germany, August 23 - 25, 1994 / comp. by U. Müller ...
Y1  - 1994
N1  - German Japanese Symposium on Multi-Phase Flow <1994, Karlsruhe> ; Kernforschungszentrum Karlsruhe ; 5389
SP  - 391
EP  - 402
PB  - Kernforschungszentrum Karlsruhe
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
A1  - Plessmann, K. W.
T1  - Controlling processes by operating-point based hybride observers
T2  - EUFIT '93 : September 7 - 10, 1993, Eurogress Aachen, Germany, proceedings / First European Congress on Fuzzy and Intelligent Technologies
Y1  - 1993
SN  - 3-86073-176-9
SP  - 1151
EP  - 1155
PB  - Verl. d. Augustinus Buchh.
CY  - Aachen
ER  -