TY  - JOUR
A1  - Thoma, Andreas
A1  - Ravi, Sridhar
T1  - Significance of parallel computing on the performance of Digital Image Correlation algorithms in MATLAB
N2  - Digital Image Correlation (DIC) is a powerful tool used to evaluate displacements and deformations in a non-intrusive manner. By comparing two images, one of the undeformed reference state of a specimen and another of the deformed target state, the relative displacement between those two states is determined. DIC is well known and often used for post-processing analysis of in-plane displacements and deformation of specimen. Increasing the analysis speed to enable real-time DIC analysis will be beneficial and extend the field of use of this technique.
Here we tested several combinations of the most common DIC methods in combination with different parallelization approaches in MATLAB and evaluated their performance to determine whether real-time analysis is possible with these methods. To reflect improvements in computing technology different hardware settings were also analysed. We found that implementation problems can reduce the efficiency of a theoretically superior algorithm such that it becomes practically slower than a suboptimal algorithm. The Newton-Raphson algorithm in combination with a modified Particle Swarm algorithm in parallel image computation was found to be most effective. This is contrary to theory, suggesting that the inverse-compositional Gauss-Newton algorithm is superior. As expected, the Brute Force Search algorithm is the least effective method. We also found that the correct choice of parallelization tasks is crucial to achieve improvements in computing speed. A poorly chosen parallelisation approach with high parallel overhead leads to inferior performance. Finally, irrespective of the computing mode the correct choice of combinations of integerpixel and sub-pixel search algorithms is decisive for an efficient analysis. Using currently available hardware realtime analysis at high framerates remains an aspiration.
Y1  - 2019
SP  - 1
EP  - 17
ER  - 
TY  - JOUR
A1  - Bartella, Alexander K.
A1  - Kamal, Mohammad
A1  - Scholl, Ingrid
A1  - Schiffer, Stefan
A1  - Steegmann, Julius
A1  - Ketelsen, Dominik
A1  - Hölzle, Frank W.
A1  - Lethaus, Bernd
T1  - Virtual reality in preoperative imaging in maxillofacial surgery: implementation of “the next level”?
JF  - British Journal of Oral and Maxillofacial Surgery
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.bjoms.2019.02.014
SN  - 0266-4356
VL  - 57
IS  - 7
SP  - 644
EP  - 648
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
T1  - Understanding the acceptance of smart home-based insurances
T2  - Proceedings of the 27th European Conference on Information Systems (ECIS), Stockholm & Uppsala, Sweden, June 8-14, 2019
Y1  - 2019
SN  - 978-1-7336325-0-8
SP  - 1
EP  - 15
ER  - 
TY  - JOUR
A1  - Capri, Miriam
A1  - Morsiani, Cristina
A1  - Santoro, Aurelia
A1  - Moriggi, Manuela
A1  - Conte, Maria
A1  - Martucci, Morena
A1  - Bellavista, Elena
A1  - Fabbri, Cristina
A1  - Giampieri, Enrico
A1  - Albracht, Kirsten
A1  - Flück, Martin
A1  - Ruoss, Severin
A1  - Brocca, Lorenza
A1  - Canepari, Monica
A1  - Longa, Emanuela
A1  - Giulio, Irene Di
A1  - Bottinelli, Roberto
A1  - Cerretelli, Paolo
A1  - Salvioli, Stefano
A1  - Gelfi, Cecilia
A1  - Franceschi, Claudio
A1  - Narici, Marco
A1  - Rittweger, Jörn
T1  - Recovery from 6-month spaceflight at the International Space Station: muscle-related stress into a proinflammatory setting
JF  - The FASEB journal : official publication of the Federation of American Societies for Experimental Biology
Y1  - 2019
U6  - http://dx.doi.org/10.1096/fj.201801625R
VL  - 33
IS  - 4
SP  - 5168
EP  - 5180
ER  - 
TY  - JOUR
A1  - Schildt, Ph.
A1  - Braun, Carsten
A1  - Marzocca, P.
T1  - Metric evaluating potentials of condition-monitoring approaches for hybrid electric aircraft propulsion systems
JF  - CEAS Aeronautical Journal
Y1  - 2019
U6  - http://dx.doi.org/10.1007/s13272-019-00411-3
SN  - 1869-5590
SP  - 1
EP  - 14
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Galdi, Chiara
A1  - Hartung, Frank
A1  - Dugelay, Jean-Luc
T1  - Socrates: A database of realistic data for source camera recognition on smartphones
T2  - Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM
Y1  - 2019
SN  - 978-989-758-351-3
U6  - http://dx.doi.org/10.5220/0007403706480655
SP  - 648
EP  - 655
ER  - 
TY  - JOUR
A1  - Quittmann, Oliver J.
A1  - Abel, Thomas
A1  - Albracht, Kirsten
A1  - Strüder, Heiko K.
T1  - Reliability of muscular activation patterns and their alterations during incremental handcycling in able-bodied participants
JF  - Sports Biomechanics
Y1  - 2019
U6  - http://dx.doi.org/10.1080/14763141.2019.1593496
SN  - 1752-6116
IS  - Article in press
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Panc, Nicolae
A1  - Contiu, Glad
A1  - Bocanet, Vlad
A1  - Thurn, Laura
A1  - Sabau, Emilia
T1  - The influence of cutting technology on surface wear hardness
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 3
SP  - 205
EP  - 210
ER  - 
TY  - CHAP
A1  - Rao, Deepak
A1  - Pathrose, Plato
A1  - Hüning, Felix
A1  - Sid, Jithin
T1  - An Approach for Validating Safety of Perception Software in Autonomous Driving Systems
T2  - Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16–18, 2019, Proceedings
N2  - The increasing complexity of Advanced Driver Assistance Systems (ADAS) presents a challenging task to validate safe and reliable performance of these systems under varied conditions. The test and validation of ADAS/AD with real test drives, although important, involves huge costs and time. Simulation tools provide an alternative with the added advantage of reproducibility but often use ideal sensors, which do not reflect real sensor output accurately. This paper presents a new validation methodology using fault injection, as recommended by the ISO 26262 standard, to test software and system robustness. In our work, we investigated and developed a tool capable of inserting faults at different software and system levels to verify its robustness. The scope of this paper is to cover the fault injection test for the Visteon’s DriveCore™ system, a centralized domain controller for Autonomous driving which is sensor agnostic and SoC agnostic. With this new approach, the validation of safety monitoring functionality and its behavior can be tested using real-world data instead of synthetic data from simulation tools resulting in having better confidence in system performance before proceeding with in-vehicle testing.
KW  - Advanced driver assistance systems (ADAS/AD)
KW  - ISO 26262
KW  - Safety-critical systems validation
KW  - Safety of the intended functionality (SOTIF)
Y1  - 2019
SN  - 978-3-030-32872-6
U6  - http://dx.doi.org/10.1007/978-3-030-32872-6_20
SP  - 303
EP  - 316
PB  - Springer
CY  - Cham
ER  - 
TY  - BOOK
A1  - Krause, Thomas
A1  - Ulke, Bernd
T1  - Übungsaufgaben und Berechnungen für den Baubetrieb: Klausurvorbereitung mit ausführlichen Lösungen
Y1  - 2019
SN  - 978-3-658-23126-2
N1  - auch als Online-Ausgabe vorhanden https://doi.org/10.1007/978-3-658-23127-9
PB  - Springer Vieweg
CY  - Wiesbaden
ET  - 3., Auflage
ER  - 
TY  - JOUR
A1  - Schieren, Mark
A1  - Kleinschmidt, Joris
A1  - Schmutz, Axel
A1  - Loop, Torsten
A1  - Gatzweiler, Karl-Heinz
A1  - Staat, Manfred
A1  - Wappler, Frank
A1  - Defosse, Jerome
T1  - Comparison of forces acting on maxillary incisors during tracheal intubation with different laryngoscopy techniques: a blinded manikin study
JF  - Anaesthesia
Y1  - 2019
SN  - 1365-2044
U6  - http://dx.doi.org/10.1111/anae.14815
N1  - Die Anhänge "Table S1 (Impact of sex and level of training on dental force. Results presented as median (IQR [range]) and n (%))" und 
"Appendix S1 (Measurement technique.)" stehen unter "Supporting Information" zum Download bereit.
VL  - 74
IS  - 12
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Linder, Peter
A1  - Beckler, Matthias
A1  - Doerr, Leo
A1  - Stoelzle-Feix, Sonja
A1  - Fertig, Niels
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Gossmann, Matthias
T1  - A new in vitro tool to investigate cardiac contractility under physiological mechanical conditions
JF  - Journal of Pharmacological and Toxicological Methods
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.vascn.2019.05.162
SN  - 1056-8719
VL  - 99
IS  - Article number 106595
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Delaittre, Guillaume
T1  - Telechelic Poly(2-Oxazoline)s
JF  - European Polymer Journal
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.eurpolymj.2019.109281
SN  - 0014-3057
IS  - In Press, Journal Pre-proof, 109281
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Savitskaya, I.S.
A1  - Kistaubayeva, A.S.
A1  - Ignatova, L.V.
A1  - Digel, Ilya
T1  - Antimicrobial and wound healing properties of a bacterial cellulose based material containing B. subtilis cells
JF  - Heliyon
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.heliyon.2019.e02592
SN  - 2405-8440
VL  - 5
IS  - 10
SP  - Artikelnummer e02592
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Dantism, Shahriar
A1  - Röhlen, Desiree
A1  - Wagner, Torsten
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - A LAPS-based differential sensor for parallelized metabolism monitoring of various bacteria
JF  - Sensors
N2  - Monitoring the cellular metabolism of bacteria in (bio)fermentation processes is crucial to control and steer them, and to prevent undesired disturbances linked to metabolically inactive microorganisms. In this context, cell-based biosensors can play an important role to improve the quality and increase the yield of such processes. This work describes the simultaneous analysis of the metabolic behavior of three different types of bacteria by means of a differential light-addressable potentiometric sensor (LAPS) set-up. The study includes Lactobacillus brevis, Corynebacterium glutamicum, and Escherichia coli, which are often applied in fermentation processes in bioreactors. Differential measurements were carried out to compensate undesirable influences such as sensor signal drift, and pH value variation during the measurements. Furthermore, calibration curves of the cellular metabolism were established as a function of the glucose concentration or cell number variation with all three model microorganisms. In this context, simultaneous (bio)sensing with the multi-organism LAPS-based set-up can open new possibilities for a cost-effective, rapid detection of the extracellular acidification of bacteria on a single sensor chip. It can be applied to evaluate the metabolic response of bacteria populations in a (bio)fermentation process, for instance, in the biogas fermentation process.
Y1  - 2019
U6  - http://dx.doi.org/10.3390/s19214692
SN  - 1424-8220
VL  - 19
IS  - 21
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Karschuck, T. L.
A1  - Filipov, Y.
A1  - Bollella, P.
A1  - Schöning, Michael Josef
A1  - Katz, E.
T1  - Not-XOR (NXOR) logic gate based on an enzyme-catalyzed reaction
JF  - International Journal of Unconventional Computing
N2  - Enzyme-catalyzed reactions have been designed to mimic various Boolean logic gates in the general framework of unconventional biomolecular computing. While some of the logic gates, particularly OR, AND, are easy to realize with biocatalytic reactions and have been reported in numerous publications, some other, like NXOR, are very challenging and have not been realized yet with enzyme reactions. The paper reports on a novel approach to mimicking the NXOR logic gate using the bell-shaped enzyme activity dependent on pH values. Shifting pH from the optimum value to the acidic or basic values by using acid or base inputs (meaning 1,0 and 0,1 inputs) inhibits the enzyme reaction, while keeping the optimum pH (assuming 0,0 and 1,1 input combinations) preserves a high enzyme activity. The challenging part of the present approach is the selection of an enzyme with a well-demonstrated bell-shape activity dependence on the pH value. While many enzymes can satisfy this condition, we selected pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase as this enzyme has the optimum pH center-located on the pH scale allowing the enzyme activity change by the acidic and basic pH shift from the optimum value corresponding to the highest activity. The present NXOR gate is added to the biomolecular “toolbox” as a new example of Boolean logic gates based on enzyme reactions.
Y1  - 2019
SN  - 1548-7199
VL  - 14
IS  - 3-4
SP  - 235
EP  - 242
PB  - Old City Publishing
CY  - Philadelphia
ER  - 
TY  - CHAP
A1  - Hüning, Felix
T1  - Complexity for heterogeneous classes: teaching embedded systems using an open project approach
T2  - Varietas delectat: Complexity is the new normality - 47th Annual Conference, Budapest, Hungary16th - 20th September 2019. SEFI 47th Annual Conference Proceedings
Y1  - 2019
SN  - 978-2-87352-018-2
SP  - 540
EP  - 549
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Analysis of volumetric solar radiation absorbers made of wire meshes
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117521
SN  - 0094243X
VL  - 2126
SP  - 030009-1
EP  - 030009-6
ER  - 
TY  - CHAP
A1  - Mahdi, Zahra
A1  - Rendón, Carlos
A1  - Schwager, Christian
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Novel concept for indirect solar-heated methane reforming
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117694
SN  - 0094-243X
VL  - 2126
SP  - 180014-1
EP  - 180014-7
PB  - AIP Publishing
CY  - Melville, NY
ER  - 
TY  - CHAP
A1  - May, Martin
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - Latzke, Markus
A1  - Bäumer, Klaus
A1  - Uhlig, Ralf
A1  - Söhn, Matthias
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Experimental facility for investigations of wire mesh absorbers for pressurized gases
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117547
SN  - 0094243X
VL  - 2126
SP  - 030035-1
EP  - 030035-9
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Alexopoulos, Spiros
A1  - Caminos, Ricardo Alexander Chico
A1  - Mitchell, John C.
A1  - Ruiz, Victor C.
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis K.
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117663
SN  - 0094243X
VL  - 2126
SP  - 150007-1
EP  - 150007-8
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Optimized Method for 3D Body Scanning Applications Based on KinectFusion
T2  - Communications in Computer and Information Science
Y1  - 2019
U6  - http://dx.doi.org/10.1007/978-3-030-29196-9_6
SN  - 1865-0929
N1  - 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; Funchal; Portugal; 19 January 2018 through 21 January 2018
VL  - 1024
SP  - 100
EP  - 113
PB  - Springer
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Shasha, Carolyn
A1  - Teeman, Eric
A1  - Slabu, Iona
A1  - Krishnan, Kannan M.
T1  - Predicting size-dependent heating efficiency of magnetic nanoparticles from experiment and stochastic Néel-Brown Langevin simulation
JF  - Journal of Magnetism and Magnetic Materials
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.jmmm.2018.09.041
SN  - 0304-8853
VL  - 471
IS  - 1
SP  - 450
EP  - 456
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Seifert, Julian
A1  - Mues, Benedikt
A1  - Roitsch, Stefan
A1  - Ménager, Christine
A1  - Schmidt, Annette M.
A1  - Slabu, Ioana
T1  - Heating efficiency of magnetic nanoparticles decreases with gradual immobilization in hydrogels
JF  - Journal of Magnetism and Magnetic Materials
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.jmmm.2018.09.113
SN  - 0304-8853
VL  - 471
IS  - 1
SP  - 486
EP  - 494
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - THES
A1  - Engelmann, Ulrich M.
T1  - Assessing magnetic fluid hyperthermia : magnetic relaxation simulation, modeling of nanoparticle uptake inside pancreatic tumor cells and in vitro efficacy
Y1  - 2019
SN  - 978-3-945954-58-4
N1  - Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2019
PB  - Infinite Science Publishing
CY  - Lübeck
ER  - 
TY  - GEN
A1  - Engelmann, Ulrich M.
T1  - Gesprächsführungskompetenzen für Naturwissenschaftler und Ingenieure. Maßnahmen zur Förderung und curricularen Verankerung von Gesprächsführungskompetenzen an Fachhochschulen
T1  - Conversational Skills for Scientists and Engineers. - Measures for the Development and Curricular Promotion of Conversational Competences at German Universities of Applied Science
Y1  - 2019
U6  - http://dx.doi.org/10.13140/RG.2.2.34026.98248
PB  - Deutsche Gesellschaft für Sprechwissenschaft und Sprecherziehung (DGSS e.V.)
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Mennicken, Max
A1  - Peter, Sophia Katharina
A1  - Kaulen, Corinna
A1  - Simon, Ulrich
A1  - Karthäuser, Silvia
T1  - Controlling the Electronic Contact at the Terpyridine/Metal Interface
JF  - The Journal of Physical Chemistry C
Y1  - 2019
U6  - http://dx.doi.org/10.1021/acs.jpcc.9b05865
SN  - 1932-7455
VL  - 123
IS  - 35
SP  - 21367
EP  - 21375
ER  - 
TY  - JOUR
A1  - Arreola, Julio
A1  - Keusgen, Michael
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Combined calorimetric gas- and spore-based biosensor array for online monitoring and sterility assurance of gaseous hydrogen peroxide in aseptic filling machines
JF  - Biosensors and Bioelectronics
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.bios.2019.111628
SN  - 0956-5663
VL  - 143
IS  - 111628
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Herrmann, Ulf
A1  - Schwarzenbart, Marc
A1  - Dittmann-Gabriel, Sören
T1  - Speicher statt Kohle. Integration thermischer Stromspeicher in vorhandene Kraftwerksstandorte
JF  - BWK : Das Energie-Fachmagazin
Y1  - 2019
SN  - 1436-4883
VL  - 71
IS  - 4
SP  - 42
EP  - 45
PB  - Springer-VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Schael, S.
A1  - Atanasyan, A.
A1  - Berdugo, J.
A1  - Bretz, T.
A1  - Czupalla, Markus
A1  - Dachwald, Bernd
A1  - Doetinchem, P. von
A1  - Duranti, M.
A1  - Gast, H.
A1  - Karpinski, W.
A1  - Kirn, T.
A1  - Lübelsmeyer, K.
A1  - Maña, C.
A1  - Marrocchesi, P.S.
A1  - Mertsch, P.
A1  - Moskalenko, I.V.
A1  - Schervan, T.
A1  - Schluse, M.
A1  - Schröder, K.-U.
A1  - Schultz von Dratzig, A.
A1  - Senatore, C.
A1  - Spies, L.
A1  - Wakely, S.P.
A1  - Wlochal, M.
A1  - Uglietti, D.
A1  - Zimmermann, J.
T1  - AMS-100: The next generation magnetic spectrometer in space – An international science platform for physics and astrophysics at Lagrange point 2
JF  - Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.nima.2019.162561
SN  - 0168-9002
VL  - 944
IS  - 162561
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Wiesen, Andreas
A1  - Schleser, Markus
T1  - Entwicklung einer Qualitätssicherung für das Laserstrahlschweißen im Vakuum mittels Bildverarbeitung
T2  - Große Schweißtechnische Tagung
Y1  - 2019
SN  - 978-3-96144-066-5
N1  - DVS CONGRESS 2019, Große Schweißtechnische Tagung, DVS-Studentenkongress. 16. bis 17. September 2019, Düsseldorf. DVS-Berichte, Band 355
SP  - 1
EP  - 6
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Otten, Christian
A1  - Gerhards, Benjamin
A1  - Schleser, Markus
A1  - Schwarz, A.
A1  - Gebhardt, Andreas
T1  - Innovative Laserschweißtechnologie für additiv gefertigte Bauteile
T2  - Große Schweißtechnische Tagung
Y1  - 2019
SN  - 978-3-96144-066-5
N1  - DVS CONGRESS 2019, Große Schweißtechnische Tagung, DVS-Studentenkongress. 16. bis 17. September 2019, Düsseldorf. DVS-Berichte, Band 355
SP  - 150
EP  - 157
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - BOOK
A1  - Matcha, Heike
T1  - Wabentheke : elementiertes großformatiges Möbel in 3D-Druck
Y1  - 2019
SN  - 978-3-9820371-1-0
N1  - gedruckt in der Bereichsbibliothek Bayernallee unter der Signatur 11 WXG 156
PB  - Fachbereich Architektur, FH Aachen, University of Applied Science
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Sagymbay, Altynay
A1  - G.E., Nusupbaeva
A1  - N.Zh, Tleumbetova
A1  - A.S., Mutalieva
A1  - Nurpeisova, Ainur
A1  - D.B., Jussupova
A1  - Digel, Ilya
T1  - Molecular genetics features of the epidemic season 2017-2018 on the influenza in Kazakhstan
JF  - Eurasian Journal of  Ecology
Y1  - 2019
SN  - 2617-7358
VL  - 58
IS  - 1
SP  - 50
EP  - 60
ER  - 
TY  - BOOK
A1  - Gebhardt, Andreas
A1  - Kessler, Julia
A1  - Schwarz, Alexander
T1  - Produktgestaltung für die additive Fertigung
Y1  - 2019
SN  - 978-3-446-45285-5
N1  - gedruckt in der Bereichsbibliothek Eupener Str. unter der Signatur 21 ZHU 47
PB  - Hanser
CY  - München
ER  - 
TY  - JOUR
A1  - Finger, Felix
A1  - Bil, Cees
A1  - Braun, Carsten
T1  - Initial Sizing Methodology for Hybrid-Electric General Aviation Aircraft
JF  - Journal of Aircraft
Y1  - 2019
U6  - http://dx.doi.org/10.2514/1.C035428
SN  - 1533-3868
VL  - 57
IS  - 2
SP  - 245
EP  - 255
ER  - 
TY  - CHAP
A1  - Kerpen, Nils B.
A1  - Schoonees, Talia
A1  - Schlurmann, Torsten
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - waveSTEPS – Wellenauf- und Wellenüberlauf an getreppten Deckwerken
T2  - 24. KFKI-Seminar 2019, 21.11.2019
Y1  - 2019
ER  - 
TY  - BOOK
A1  - Pieper, Martin
T1  - Quantenmechanik : Einführung in die mathematische Formulierung
Y1  - 2019
SN  - 978-3-658-28329-2
U6  - http://dx.doi.org/10.1007/978-3-658-28329-2
N1  - auch gedruckt in der Bereichbibliothek Jülich unter der Signatur 61 UHH 41
PB  - Springer Spektrum
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Wilbring, Daniela
A1  - Enning, Manfred
T1  - Stromversorgung auf Güterwagen - Aktuelle Bemühungen zur Standardisierung
JF  - ETR - Eisenbahntechnische Rundschau
Y1  - 2019
SN  - 0013-2845
VL  - 68
IS  - 11
SP  - 64
EP  - 67
PB  - DVV Media Group
CY  - Hamburg
ER  - 
TY  - CHAP
A1  - Luft, Angela
A1  - Gebhardt, Andreas
A1  - Balc, Nicolae
T1  - Challenges of additive manufacturing in production systems
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901003
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01003
ER  - 
TY  - CHAP
A1  - Abbas, Karim
A1  - Thurn, Laura
A1  - Kessler, Julia
A1  - Eichler, Fabian
T1  - Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901009
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01009
ER  - 
TY  - CHAP
A1  - Eichler, Fabian
A1  - Skupin, Marco
A1  - Thurn, Laura
A1  - Kasch, Susanne
A1  - Schmidt, Thomas
T1  - Operating limits for beam melting of glass materials
T2  - Modern Technologies in Manufacturing (MTeM 2019)
N2  - Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901004
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01004
ER  - 
TY  - CHAP
A1  - Baader, Fabian
A1  - Keller, Denis
A1  - Lehmann, Raphael
A1  - Gerber, Lukas
A1  - Reiswich, Martin
A1  - Dachwald, Bernd
A1  - Förstner, Roger
T1  - Operating melting probes for ice penetration under sublimation  conditions and in reduced gravity on a sounding rocket
T2  - Proceedings of the 24th ESA Symposium on European Rocket and Balloon Programmes and related Research
Y1  - 2019
SN  - 0379-6566
N1  - 24th PAC Symposium 2019
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Propulsion Technology Levels on the Sizing and Energy Consumption for Serial HybridElectric General Aviation Aircraft
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Rings, René
A1  - Ludowicy, Jonas
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Sensitivity Analysis of General Aviation Aircraft with Parallel Hybrid-Electric Propulsion Systems
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - JOUR
A1  - Engel, Mareike
A1  - Gemünde, Andre
A1  - Holtmann, Dirk
A1  - Müller-Renno, Christine
A1  - Ziegler, Christiane
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Clostridium acetobutylicum’s connecting world: cell appendage formation in bioelectrochemical systems
JF  - ChemElectroChem
Y1  - 2019
U6  - http://dx.doi.org/10.1002/celc.201901656
SN  - 2196-0216
IS  - Accepted Article
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Slabu, Ioana
A1  - Roeth, Anjali A.
A1  - Engelmann, Ulrich M.
A1  - Wiekhorst, Frank
A1  - Buhl, Eva M.
A1  - Neumann, Ulf P.
A1  - Schmitz-Rode, Thomas
T1  - Modeling of magnetoliposome uptake in human pancreatic tumor cells in vitro
JF  - Nanotechnology
Y1  - 2019
U6  - http://dx.doi.org/10.1088/1361-6528/ab033e
SN  - 1361-6528
VL  - 30
IS  - 18
SP  - 184004
ER  - 
TY  - JOUR
A1  - Finkenberger, Isabel Maria
T1  - Bodenpolitik als Instrument strategischer Transformation
JF  - UrbanLab-Magazin : Fachzeitschrift für Stadt- und Quartierplanung
Y1  - 2019
VL  - 2019
IS  - 05
SP  - 18
EP  - 25
ER  - 
TY  - CHAP
A1  - Cordes, Sven
A1  - Gligorevic, Snjezana
A1  - Blicharski, Peter
T1  - Analysis of sine precision influence on DOA estimation using the MUSIC algorithm
T2  - 2019 20th International Radar Symposium (IRS)
Y1  - 2019
SN  - 978-3-7369-9860-5
U6  - http://dx.doi.org/10.23919/IRS.2019.8768162
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Turlybekuly, Amanzhol
A1  - Pogrebnjak, Alexander
A1  - Sukhodub, L. F.
A1  - Sukhodub, Liudmyla B.
A1  - Kistaubayeva, A. S.
A1  - Savitskaya, Irina
A1  - Shokatayeva, D. H.
A1  - Bondar, Oleksandr V.
A1  - Shaimardanov, Z. K.
A1  - Plotnikov, Sergey V.
A1  - Shaimardanova, B. H.
A1  - Digel, Ilya
T1  - Synthesis, characterization, in vitro biocompatibility and antibacterial properties study of nanocomposite materials based on hydroxyapatite-biphasic ZnO micro- and nanoparticles embedded in Alginate matrix
JF  - Materials Science and Engineering C
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.msec.2019.109965
VL  - 104
IS  - Article number 109965
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Engine Failure Constraints on the Initial Sizing of Hybrid-Electric GA Aircraft
T2  - AIAA Scitech 2019 Forum
Y1  - 2019
U6  - http://dx.doi.org/10.2514/6.2019-1812
N1  - AIAA Scitech Forum, 2019; San Diego; United States; 7 January 2019 through 11 January 2019
ER  - 
TY  - JOUR
A1  - Ermolaev, AP
A1  - Erichev, VP
A1  - Antonov, AA
A1  - Grigoryan, GL
A1  - Kotliar, Konstantin
A1  - Levitsky, YV
A1  - Hderi, K
A1  - Mazurova, YV
T1  - Assessing retinal photosensitivity in patients with central vision impairment using a portable perimeter (a preliminary report)
JF  - Vestnik oftalmologii
Y1  - 2019
U6  - http://dx.doi.org/10.17116/oftalma201913503146
N1  - Abstract in Englisch
VL  - 135
IS  - 3
SP  - 46
EP  - 54
ER  - 
TY  - JOUR
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Baltes, Klaus
A1  - Wagner, Patrick H.
A1  - Schöning, Michael Josef
T1  - Development of an in-line evaporation unit for the production of gas mixtures containing hydrogen peroxide – numerical modeling and experimental results
JF  - International Journal of Heat and Mass Transfer
N2  - Hydrogen peroxide (H2O2) is a typical surface sterilization agent for packaging materials used in the pharmaceutical, food and beverage industries. We use the finite-elements method to analyze the conceptual design of an in-line thermal evaporation unit to produce a heated gas mixture of air and evaporated H2O2 solution. For the numerical model, the required phase-transition variables of pure H2O2  solution and of the aerosol mixture are acquired from vapor-liquid equilibrium (VLE) diagrams derived from vapor-pressure formulations. This work combines homogeneous single-phase turbulent flow with heat-transfer physics to describe the operation of the evaporation unit. We introduce the apparent heat-capacity concept to approximate the non-isothermal phase-transition process of the H2O2-containing aerosol. Empirical and analytical functions are defined to represent the temperature- and pressure-dependent material properties of the aqueous H2O2 solution, the aerosol and the gas mixture. To validate the numerical model, the simulation results are compared to experimental data on the heating power required to produce the gas mixture. This shows good agreement with the deviations below 10%. Experimental observations on the formation of deposits due to the evaporation of stabilized H2O2 solution fits the prediction made from simulation results.
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.ijheatmasstransfer.2019.118519
SN  - 0017-9310
VL  - 143
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Leschinger, Tim
A1  - Besch, Katharina
A1  - Aydin, Cansu
A1  - Staat, Manfred
A1  - Scaal, Martin
A1  - Müller, Lars Peter
A1  - Wegmann, Kilian
T1  - Irreparable rotator cuff tears: a biomechanical comparison of superior capsuloligamentous complex reconstruction techniques and an interposition graft technique
JF  - The Orthopaedic Journal of Sports Medicine
Y1  - 2019
U6  - http://dx.doi.org/10.1177/2325967119864590
VL  - 7
IS  - 8
SP  - 1
EP  - 5
ER  - 
TY  - THES
A1  - Tran, Ngoc Trinh
T1  - Limit and Shakedown analysis of structures under stochastic conditions
Y1  - 2019
U6  - http://dx.doi.org/10.24355/dbbs.084-201902121135-0
PB  - Technische Universität Braunschweig
CY  - Braunschweig
ER  - 
TY  - CHAP
A1  - Schwager, Christian
A1  - Teixeira Boura, Cristiano José
A1  - Flesch, Robert
A1  - Alexopoulos, Spiros
A1  - Herrmann, Ulf
T1  - Improved efficiency prediction of a molten salt receiver based on dynamic cloud passage simulation
T2  - AIP Conference Proceedings
Y1  - 2019
SN  - 978-0-7354-1866-0
U6  - http://dx.doi.org/10.1063/1.5117566
VL  - 2126
IS  - 1
SP  - 030054-1
EP  - 030054-8
ER  - 
TY  - JOUR
A1  - Schmidt, Katharina
A1  - Forkmann, Katarina
A1  - Schultz, Heidrun
A1  - Gratz, Marcel
A1  - Bitz, Andreas
A1  - Wiech, Katja
A1  - Bingel, Ulrike
T1  - Enhanced Neural Reinstatement for Evoked Facial Pain Compared With Evoked Hand Pain
JF  - The  Journal of Pain
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.jpain.2019.03.003
SN  - 1526-5900
IS  - In Press, Corrected Proof
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Claer, Mario
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - Calibration of a Rotating or Revolving Platform with a LiDAR Sensor
JF  - Applied Sciences
Y1  - 2019
U6  - http://dx.doi.org/10.3390/app9112238
SN  - 2076-3417
VL  - Volume 9
IS  - issue 11, 2238
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Donner, Ralf
A1  - Rabel, Matthias
A1  - Scholl, Ingrid
A1  - Ferrein, Alexander
A1  - Donner, Marc
A1  - Geier, Andreas
A1  - John, André
A1  - Köhler, Christian
A1  - Varga, Sebastian
T1  - Die Extraktion bergbaulich relevanter Merkmale aus 3D-Punktwolken eines untertagetauglichen mobilen Multisensorsystems
T2  - Tagungsband Geomonitoring
Y1  - 2019
U6  - http://dx.doi.org/10.15488/4515
SP  - 91
EP  - 110
ER  - 
TY  - CHAP
A1  - Steinbauer, Gerald
A1  - Ferrein, Alexander
T1  - CogRob 2018 : 
Cognitive Robotics Workshop.
Proceedings of the 11th Cognitive Robotics Workshop 2018
co-located with 16th International Conference on Principles of Knowledge Representation and Reasoning (KR 2018).
Tempe, AZ, USA, October 27th, 2018.
T2  - CEUR workshop proceedings
Y1  - 2019
SN  - 1613-0073
N1  - edited by Gerald Steinbauer, Alexander Ferrein
IS  - Vol-2325
ER  - 
TY  - JOUR
A1  - Engel, Mareike
A1  - Bayer, Hendrik
A1  - Holtmann, Dirk
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Flavin secretion of Clostridium acetobutylicum in a bioelectrochemical system - Is an iron limitation involved?
JF  - Bioelectrochemistry
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.bioelechem.2019.05.014
SN  - 1567-5394
IS  - In Press, Accepted Manuscript
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Schiffer, Fabian
A1  - Bragard, Michael
T1  - Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - http://dx.doi.org/10.1109/REM.2019.8744101
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Sube, Maike
A1  - Schneider, Maike
A1  - Jungemann, Christoph
T1  - Introducing a Cross-University Bachelor’s Programme with Orientation Semester - Enabling a Permeable Academic Education System
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - http://dx.doi.org/10.1109/REM.2019.8744132
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
T1  - Aspects of the Quantum-Classical Connection Based on Statistical Maps
JF  - Foundations of Physics
Y1  - 2019
U6  - http://dx.doi.org/10.1007/s10701-019-00269-9
VL  - 49
IS  - 6
SP  - 677
EP  - 692
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Kopp, Alexander
A1  - Schmeets, Ralf
A1  - Gosau, Martin
A1  - Friedrich, Reinhard E.
A1  - Fuest, Sandra
A1  - Behbahani, Mehdi
A1  - Barbeck, Mike
A1  - Rutkowski, Rico
A1  - Burg, Simon
A1  - Kluwe, Lan
A1  - Henningsen, Anders
T1  - Production and Characterization of Porous Fibroin Scaffolds for Regenerative Medical Application
JF  - In Vivo
Y1  - 2019
U6  - http://dx.doi.org/10.21873/invivo.11536
SN  - 1791-7549
VL  - 33
IS  - 3
SP  - 757
EP  - 762
ER  - 
TY  - CHAP
A1  - Bayer, Robin
A1  - Hescheler, Jürgen
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Treating arterial hypertension in a cell culture well
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH AachenW
N2  - Hypertension describes the pathological increase of blood pressure, which is most commonly associated with the increase of vascular wall stiffness [1]. Referring to the “Deutsche Bluthochdruck Liga” this pathology shows a growing trend in our aging society. In order to find novel pharmacological and probably personalized treatments, we want to present a functional approach to study biomechanical properties of a human aortic vascular model.
In this method review we will give an overview of recent studies which were carried out with the CellDrum technology [2] and underline the added value to already existing standard procedures known from the field of physiology.
Herein described CellDrum technology is a system to measure functional mechanical properties of cell monolayers and thin tissue constructs in-vitro. Additionally, the CellDrum enables to elucidate the mechanical response of cells to pharmacological drugs, toxins and vasoactive agents. Due to its highly flexible polymer support, cells can also be mechanically stimulated by steady and cyclic biaxial stretching.
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - http://dx.doi.org/10.17185/duepublico/48750
SP  - 5
EP  - 6
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - JOUR
A1  - Krome, Cornelia
A1  - Höft, Jan
A1  - Sander, Volker
T1  - Clustering time series applied to energy markets
JF  - Energy Informatics
Y1  - 2019
U6  - http://dx.doi.org/10.1186/s42162-019-0076-0
SN  - 2520-8942
VL  - 2
IS  - Article numer 17
SP  - 1
EP  - 20
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Solbach, Klaus
A1  - Gratz, Marcel
A1  - Brunheim, Sascha
A1  - Fiedler, Thomas M.
A1  - Johst, Sören
A1  - Bitz, Andreas
A1  - Shooshtary, Samaneh
A1  - Abuelhaija, Asjraf
A1  - Voelker, Maximilian N.
A1  - Rietsch, Stefan H. G.
A1  - Kraff, Oliver
A1  - Maderwald, Stefan
A1  - Flöser, Martina
A1  - Oehmingen, Mark
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
T1  - A 32-channel parallel transmit system add-on for 7T MRI
JF  - Plos one
Y1  - 2019
U6  - http://dx.doi.org/10.1371/journal.pone.0222452
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Finger, Felix
A1  - Havermann, Marc
A1  - Braun, Carsten
A1  - Marino, Matthew
A1  - Bil, Cees
T1  - A highly automated method for simulating airfoil characteristics at low Reynolds number using a RANS - transition approach
T2  - Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany
Y1  - 2019
U6  - http://dx.doi.org/10.25967/490026
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Mass, Primary Energy, and Cost - The Impact of Optimization Objectives on the Initial Sizing of Hybrid-Electric General Aviation Aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany
Y1  - 2019
U6  - http://dx.doi.org/10.25967/490012
SP  - 1
EP  - 17
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Finger, Felix
T1  - Conceptual Design of a Modular 150 kg Vertical Take-off and Landing Unmanned Aerial Vehicle
T2  - Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany
Y1  - 2019
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Timme, Michael
T1  - Die Unwirksamkeit von auf Öffnungsklauseln in Gemeinschaftsordnungen fußenden Beschlüssen
JF  - Monatsschrift für deutsches Recht
Y1  - 2019
U6  - http://dx.doi.org/10.9785/mdtr-2019-731509
SN  - 0340-1812
IS  - 15
SP  - 904
EP  - 905
PB  - Verlag Dr. Otto Schmidt
CY  - Köln
ER  - 
TY  - JOUR
A1  - Bhattarai, Aroj
A1  - Staat, Manfred
T1  - A computational study of organ relocation after laparoscopic pectopexy to repair posthysterectomy vaginal vault prolapse
JF  - Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization
Y1  - 2019
U6  - http://dx.doi.org/10.1080/21681163.2019.1670095
SN  - 2168-1171
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Noureddine, Yacine
A1  - Kraff, Oliver
A1  - Ladd, Mark E.
A1  - Wrede, Karsten
A1  - Chen, Bixia
A1  - Quick, Harald H.
A1  - Schaefers, Georg
A1  - Bitz, Andreas
T1  - Radiofrequency induced heating around aneurysm clips using a generic birdcage head coil at 7 Tesla under consideration of the minimum distance to decouple multiple aneurysm clips
JF  - Magnetic Resonance in Medicine
Y1  - 2019
U6  - http://dx.doi.org/10.1002/mrm.27835
SN  - 1522-2594
IS  - Early view
SP  - 1
EP  - 17
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - BOOK
A1  - Krause, Thomas
A1  - Ulke, Bernd
A1  - Martin, Joachim
A1  - Lemke, Jörg
A1  - Sparla, Peter
A1  - Streit, Wilfried
ED  - Krause, Thomas
ED  - Ulke, Bernd
T1  - Übungsaufgaben und Berechnungen für den Baubetrieb: Klausurvorbereitung mit ausführlichen Lösungen
Y1  - 2019
SN  - 978-3-658-23126-2 (Print) 978-3-658-23127-9 (Online)
N1  - Vorangegangen ist Krause, Thomas Beispiele aus der Baubetriebspraxis
gedruckt in der Bereichsbibliothek Bayernallee unter der Signatur 11 XBS 90(3)
PB  - Springer Vieweg
CY  - Wiesbaden
ET  - 3. Auflage
ER  - 
TY  - CHAP
A1  - Martin, Joachim
T1  - Bemessung von Baukonstruktionen
T2  - Übungsaufgaben und Berechnungen für den Baubetrieb
Y1  - 2019
SN  - 978-3-658-23127-9
U6  - http://dx.doi.org/10.1007/978-3-658-23127-9_1
SP  - 1
EP  - 11
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Sparla, Peter
T1  - Vermessung
T2  - Übungsaufgaben und Berechnungen für den Baubetrieb
Y1  - 2019
SN  - 978-3-658-23127-9
U6  - http://dx.doi.org/10.1007/978-3-658-23127-9_2
SP  - 13
EP  - 61
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Ulke, Bernd
T1  - Der baurechtliche Vertrag
T2  - Übungsaufgaben und Berechnungen für den Baubetrieb
N2  - Anhand von kurzen theoretischen Einführungen werden anhand von Beispielen die wesentlichen Aspekte des baurechtlichen Vertrages erläutert. Nach einer Einführung über das Zustandekommen von (Bau-) Verträgen wird die für Streitfälle unerlässliche Dokumentation auf Baustellen erläutert. Hierbei werden Hinweise zur Erstellung von Protokollen, zum E-Mail bei Großprojekten und zur Dokumentation von Stundenlohnarbeiten gegeben. Des Weiteren wird eine Schriftverkehrsliste vorgestellt, die zur Nachverfolgung des Schriftverkehrs bei Großprojekten unerlässlich ist.

Anschließend werden die typischen Vertragsarten vorgestellt, die bei der Abwicklung von Großprojekten zu beachten sind und die Unterschiede werden durch Fallbeispiele erläutert.

Einen Schwerpunkt des Kapitels bilden auftragsnehmerseitige Verzüge sowie mangelbehaftete Leistungen. Hier werden Hinweise gegeben, wie in den entsprechenden Situationen zu reagieren ist.
Y1  - 2019
SN  - 978-3-658-23127-9
SP  - 63
EP  - 87
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Ulke, Bernd
T1  - Baukosten und Finanzierung
T2  - Übungsaufgaben und Berechnungen für den Baubetrieb
Y1  - 2019
SN  - 978-3-658-23127-9
U6  - http://dx.doi.org/10.1007/978-3-658-23127-9_4
SP  - 89
EP  - 100
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Krause, Thomas
T1  - Bauabrechnung und Mengenermittlung
T2  - Übungsaufgaben und Berechnungen für den Baubetrieb
Y1  - 2019
SN  - 978-3-658-23127-9
U6  - http://dx.doi.org/10.1007/978-3-658-23127-9_5
SP  - 101
EP  - 116
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Ulke, Bernd
T1  - Arbeitsvorbereitung und Ablaufplanung
T2  - Übungsaufgaben und Berechnungen für den Baubetrieb
Y1  - 2019
SN  - 978-3-658-23127-9
U6  - http://dx.doi.org/10.1007/978-3-658-23127-9_6
SP  - 117
EP  - 154
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Krause, Thomas
T1  - Baumaschinen
T2  - Übungsaufgaben und Berechnungen für den Baubetrieb
Y1  - 2019
SN  - 978-3-658-23127-9
U6  - http://dx.doi.org/10.1007/978-3-658-23127-9_7
SP  - 155
EP  - 163
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - BOOK
ED  - Wolf, Martin R.
ED  - Barton, Thomas
ED  - Herrmann, Frank
ED  - Meister, Vera G.
ED  - Müller, Christian
ED  - Seel, Christian
T1  - Angewandte Forschung in der Wirtschaftsinformatik
BT  - Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule für Angewandte Wissenschaften Aachen
Y1  - 2019
SN  - 978-3-944330-62-4
N1  - Buch ist in der Bereichsbibliothek Eupener Str. vorhanden. Signatur: 21 QGT 95-2019
PB  - Mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Ernhardt, Selina
A1  - Drumm, Christian
A1  - van Gog, Tamara
A1  - Brand-Gruwel, Saskia
A1  - Jarodzka, Halszka
T1  - Through the eyes of a programmer : a research project on how to foster programming education with eye-tracking technology
T2  - Tagungsband zur 32. AKWI-Jahrestagung vom 15.09.2019 bis 18.09.2019 an der Fachhochschule für Angewandte Wissenschaften Aachen
Y1  - 2019
SN  - 978-3-944330-62-4
SP  - 42
EP  - 47
PB  - Mana-Buch
CY  - Heide
ER  - 
TY  - BOOK
A1  - Drumm, Christian
A1  - Knigge, Marlene
A1  - Scheuermann, Bernd
A1  - Weidner, Stefan
T1  - Einstieg in SAP ERP: Geschäftsprozesse, Komponenten, Zusammenhänge : erklärt am Beispielunternehmen Global Bike
Y1  - 2019
SN  - 978-3-8362-6298-9
SN  - 978-3-8362-8206-2 E-ISBN
N1  - auch als E-Book verfügbar
PB  - Rheinwerk Publishing
CY  - Bonn
ET  - 1. Auflage
ER  - 
TY  - BOOK
A1  - Laack, Walter van
T1  - Weltbilder gestern und heute – Was bleibt und worüber lacht man morgen?
T3  - Vorträge & Einsichten, Lectures & Insights
Y1  - 2019
SN  - ISBN 978-3936624-44-1
IS  - Band 2
PB  - van Laack Buchverlag
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Finkenberger, Isabel Maria
A1  - Baumeister, Eva-Maria
A1  - Koch, Christian
T1  - Komplement und Verstärker : Wandel durch neue Allianzen
T1  - Amplifier and complement : creating change through new alliances
T2  - Komplement und Verstärker : zum Verhältnis von Stadtplanung, künstlerischen Praktiken und Kulturinstitutionen
Y1  - 2019
SN  - 978-3-86859-578-9
SP  - 10
EP  - 39
PB  - JOVIS Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Finkenberger, Isabel Maria
A1  - Baumeister, Eva-Maria
A1  - Koch, Christian
T1  - Komplement und Verstärker : der Diskurs geht weiter
T1  - Amplifier and complement : the discourse continues
T2  - Komplement und Verstärker : zum Verhältnis von Stadtplanung, künstlerischen Praktiken und Kulturinstitutionen
Y1  - 2019
SN  - 978-3-86859-578-9
SP  - 40
EP  - 49
PB  - JOVIS Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Finkenberger, Isabel Maria
A1  - Herbert, Saskia
A1  - Malorny, Thomas
A1  - Koch, Christian
T1  - Perforierte Wirklichkeit und mögliche Zukünfte : ein Gespräch
T1  - Perforated reality and possible futures : a conversation
T2  - Komplement und Verstärker : zum Verhältnis von Stadtplanung, künstlerischen Praktiken und Kulturinstitutionen
Y1  - 2019
SN  - 978-3-86859-578-9
SP  - 108
EP  - 129
PB  - JOVIS Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Finkenberger, Isabel Maria
A1  - Baumeister, Eva-Maria
A1  - Koch, Christian
T1  - Themen
T1  - Topics
T2  - Komplement und Verstärker: zum Verhältnis von Stadtplanung, künstlerischen Praktiken und Kulturinstitutionen
Y1  - 2019
SN  - 978-3-86859-578-9
SP  - 50
EP  - 57
PB  - JOVIS Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Hailer, Benjamin
A1  - Weber, Tobias
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for Autoclave-Produced Sandwich Structures
T2  - Proceedings of SAMPE Europe Conference 2019, Nantes, France
Y1  - 2019
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Hailer, Benjamin
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
T2  - Proceedings of SAMPE Europe Conference 2019, Nantes, France
Y1  - 2019
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Gronsfeld, Richard
A1  - Joachim, Klubert
A1  - Malecha, Hartmut
T1  - 3-D-Visualisierung von vorhandenen Staubauwerken zur holistischen Planung und Überwachung
JF  - Wasserwirtschaft
Y1  - 2019
U6  - http://dx.doi.org/10.1007/s35147-019-0075-x
SN  - 2192-8762
N1  - gedruckt in der Bereichsbibliothek Bayernallee unter der Signatur 13 Z 218 vorhanden
VL  - 109
IS  - 5
SP  - 82
EP  - 85
PB  - Springer
CY  - Berlin
ER  - 
TY  - PAT
A1  - Hojdis, Nils
A1  - Multhaupt, Hendrik
A1  - Recker, Carla
A1  - Wark, Michael
T1  - Schwefelvernetzbare Kautschukmischung, Vulkanisat der Kautschukmischung und Fahrzeugreifen
N2  - Die Erfindung betrifft eine schwefelvernetzbare Kautschukmischung, deren Vulkanisat und einen Fahrzeugreifen. Die erfindungsgemäße Kautschukmischung enthält wenigstens folgende Bestandteile: - Wenigstens einen Dienkautschuk; - wenigstens eine Kohle (HTC-Kohle), die mittels hydrothermaler Karbonisierung von wenigstens einer Ausgangssubstanz hergestellt ist. Der erfindungsgemäße Fahrzeugreifen weist in wenigstens einem Bauteil wenigstens ein erfindungsgemäßes Vulkanisat der Kautschukmischung auf.
Y1  - 2019
N1  - Patent EP3470457A1 17.04.2019
auch veröffentlicht unter WO2019072431A1
ER  - 
TY  - PAT
A1  - Dauer, David-Raphael
A1  - Hojdis, Nils
A1  - Müller, Norbert
A1  - Recker, Carla
A1  - Schax, Fabian
A1  - Schöffel, Julia
A1  - Tarantola, Gesa
A1  - Weber, Christine
T1  - Schwefelvernetzbare Kautschukmischung, Vulkanisat der Kautschukmischung und Fahrzeugreifen
N2  - Die Erfindung betrifft eine schwefelvernetzbare Kautschukmischung, deren Vulkanisat und einen Fahrzeugreifen. Die schwefelvernetzbare Kautschukmischung enthält wenigstens die folgenden Bestandteile: - wenigstens einen Dienkautschuk; und - 10 bis 300 phr wenigstens einer Kieselsäure; und - 1 bis 30 phf wenigstens eines Silans A mit der allgemeinen Summenformel A-I) A-I)(R1)oSi-R2-(S-R3)q-S-X; und - 0,5 bis 30 phf wenigstens eines Silans B mit der allgemeinen Summenformel B-I) B-I) (R1)oSi-R2-(S-R3)u-S-R2-Si(R1)o wobei q =1, 2 oder 3 ist; und u = 1, 2 oder 3 ist; und X ein Wasserstoffatom oder eine –C(=O)-R8 Gruppe ist wobei R8 ausgewählt ist aus Wasserstoff, C1-C20 Alkylgruppen, vorzugsweise C1-C17, C6-C20- Arylgruppen, vorzugsweise Phenyl, C2-C20-Alkenylgruppen und C7-C20-Aralkylgruppen.
Y1  - 2019
N1  - Patent WO2019105614A1 06.06.2019
auch veröffentlicht unter 
CN111386199A; DE102017221232A1; 
 TW201925306A
ER  - 
TY  - JOUR
A1  - Schiedermeier, Maximilian
A1  - Rettner, Cornelius
A1  - Heilmann, Marcel
A1  - Schneider, Felix
A1  - Marz, Martin
T1  - Interference of automotive HV-DC-systems by traction voltage-source-inverters (VSI)
JF  - 2019 IEEE Transportation Electrification Conference (ITEC-India)
Y1  - 2019
U6  - http://dx.doi.org/10.1109/ITEC-India48457.2019.ITECINDIA2019-37
SP  - 1
EP  - 6
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Kunkel, Maximilian Hugo
A1  - Gebhardt, Andreas
A1  - Mpofu, Khumbulani
A1  - Kallweit, Stephan
T1  - Quality assurance in metal powder bed fusion via deep-learning-based image classification
JF  - Rapid Prototyping Journal
Y1  - 2019
U6  - http://dx.doi.org/10.1108/RPJ-03-2019-0066
SN  - 1355-2546
VL  - 26
IS  - 2
SP  - 259
EP  - 266
ER  - 
TY  - PAT
A1  - Hojdis, Nils
T1  - Verfahren zum Bestimmen einer Sitzeinstellung eines Sitzes eines Kraftfahrzeugs, Computerprogrammprodukt, Servereinrichtung, Kommunikationsendgerät und Kraftfahrzeug
N2  - Die Erfindung betrifft ein Verfahren zum Bestimmen einer Sitzeinstellung (23) eines Sitzes (3) eines Kraftfahrzeugs (1), bei welchem folgende Schritte durchgeführt werden:- Bereitstellen einer Körperabmessung (12) eines Nutzers (6) des Kraftfahrzeugs (1);- Bereitstellen einer Sitzeigenschaft (13) des Sitzes (3) des Kraftfahrzeugs (1);- Bereitstellen eines mit zumindest einer Referenzsitzeigenschaft (20), zumindest einer Referenzkörperabmessung (21) und zumindest einer Referenzsitzeinstellung (22) trainiertes künstliches neuronales Netz (14); und- Bestimmen der Sitzeinstellung (23) durch Eingabe der Körperabmessung (12) und der Sitzeigenschaft (13) in das künstliche neuronale Netz (14).
Y1  - 2019
N1  - Patent DE102018211831A1 05.12.2019
ER  - 
TY  - PAT
A1  - Dauer, David-Raphael
A1  - Hojdis, Nils
A1  - Müller, Norbert
A1  - Recker, Carla
A1  - Schax, Fabian
A1  - Schöffel, Julia
A1  - Tarantola, Gesa
A1  - Weber, Christine
T1  - Schwefelvernetzbare Kautschukmischung, Vulkanisat der Kautschukmischung und Fahrzeugreifen
N2  - Die Erfindung betrifft eine schwefelvernetzbare Kautschukmischung, deren Vulkanisat und einen Fahrzeugreifen.Die schwefelvernetzbare Kautschukmischung enthält wenigstens die folgenden Bestandteile:- wenigstens einen Dienkautschuk; und- 10 bis 300 phr wenigstens einer Kieselsäure ; und- 1 bis 30 phf wenigstens eines Silans A mit der allgemeinen Summenformel A-I)und- 0,5 bis 30 phf wenigstens eines Silans B mit der allgemeinen Summenformel B-I)wobei u gleich 0, 1, 2 oder 3 und v gleich 0 oder 1 ist.
Y1  - 2019
N1  - Patent DE102017221236A1 29.05.2019
auch veröffentlicht unter CN111405987A; TW201925305A; WO2019105615A1
ER  - 
TY  - CHAP
A1  - Bedbur, Christian
A1  - Thull, J.
A1  - Moorkamp, Wilfried
A1  - Uibel, Thomas
T1  - Standardbrücken für Geh- und Radwege
T2  - Tagungsband 4. Aachener Holzbautagung 2019: 12. und 13. September an der FH Aachen
Y1  - 2020
SN  - 2197-4489
SP  - 34
EP  - 45
PB  - FH Aachen
CY  - Aachen
ER  -