TY  - JOUR
A1  - Iken, Heiko
A1  - Kirsanov, D.
A1  - Legin, A.
A1  - Schöning, Michael Josef
T1  - Novel Thin-Film Polymeric Materials for the Detection of Heavy Metals
JF  - Procedia Engineering
N2  - A variety of transition metals, e.g., copper, zinc, cadmium, lead, etc. are widely used in industry as components for wires, coatings, alloys, batteries, paints and so on. The inevitable presence of transition metals in industrial processes implies the ambition of developing a proper analytical technique for their adequate monitoring. Most of these elements, especially lead and cadmium, are acutely toxic for biological organisms. Quantitative determination of these metals at low activity levels in different environmental and industrial samples is therefore a vital task. A promising approach to achieve an at-side or on-line monitoring on a miniaturized and cost efficient way is the combination of a common potentiometric sensor array with heavy metal-sensitive thin-film materials, like chalcogenide glasses and polymeric materials, respectively.
Y1  - 2012
U6  - https://doi.org/10.1016/j.proeng.2012.09.148
SN  - 1877-7058
N1  - Part of special issue "26th European Conference on Solid-State Transducers, EUROSENSOR 2012"
IS  - 47
SP  - 322
EP  - 325
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
A1  - Thalayasingam, K.
T1  - Novel vector non-linear measurement system for intermodulation measurements  / Thalayasingam, K.; Heuermann, H.
JF  - European Microwave Conference, 2009 : EuMC 2009 ; Sept. 29, 2009 - Oct. 1, 2009, Rome, Italy ; part of European Microwave Week (EuMW) / sponsored by EuMA, European Microwave Association ... Endorsed by IEEE
Y1  - 2009
SN  - 978-1-4244-4748-0
N1  - European Microwave Conference ; (39 : ; 2009.09.29-10.01 : ; Rome)
SP  - 926
EP  - 929
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Monakhova, Yulia
A1  - Diehl, Bernd W.K.
T1  - Nuclear magnetic resonance spectroscopy as an elegant tool for a complete quality control of crude heparin material
JF  - Journal of Pharmaceutical and Biomedical Analysis
N2  - Nuclear magnetic resonance (NMR) spectrometric methods for the quantitative analysis of pure heparin in crude heparin is proposed. For quantification, a two-step routine was developed using a USP heparin reference sample for calibration and benzoic acid as an internal standard. The method was successfully validated for its accuracy, reproducibility, and precision. The methodology was used to analyze 20 authentic porcine heparinoid samples having heparin content between 4.25 w/w % and 64.4 w/w %. The characterization of crude heparin products was further extended to a simultaneous analysis of these common ions: sodium, calcium, acetate and chloride. A significant, linear dependence was found between anticoagulant activity and assayed heparin content for thirteen heparinoids samples, for which reference data were available. A Diffused-ordered NMR experiment (DOSY) can be used for qualitative analysis of specific glycosaminoglycans (GAGs) in heparinoid matrices and, potentially, for quantitative prediction of molecular weight of GAGs. NMR spectrometry therefore represents a unique analytical method suitable for the simultaneous quantitative control of organic and inorganic composition of crude heparin samples (especially heparin content) as well as an estimation of other physical and quality parameters (molecular weight, animal origin and activity).
KW  - NMR spectroscopy
KW  - Heparin
KW  - Crude heparin
KW  - USP
KW  - Ions
Y1  - 2022
U6  - https://doi.org/10.1016/j.jpba.2022.114915
SN  - 0731-7085
VL  - 219
IS  - Article number: 114915
PB  - Elsevier
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Stanley, Lesley A.
A1  - Horsburgh, Brian C.
A1  - Ross, Jillian
A1  - Scheer, Nico
A1  - Wolf, C. Roland
T1  - Nuclear Receptors which play a pivotal role in drug disposition and chemical toxicity
JF  - Drug Metabolism Reviews
Y1  - 2006
U6  - https://doi.org/10.1080/03602530600786232
SN  - 1097-9883
VL  - 38
IS  - 3
SP  - 515
EP  - 597
ER  - 
TY  - JOUR
A1  - Hoyler, Friedrich
A1  - Hoff, R. W.
A1  - Börner, H. G.
T1  - Nuclear structure of 170Tm from neutron-capture and (d,p)-reaction measurements / R. W. Hoff ; H. G. Börner ... F. Hoyler ...
JF  - Physical review / C. 54 (1996), H. 1
Y1  - 1996
SN  - 0556-2813
SP  - 78
EP  - 116
ER  - 
TY  - JOUR
A1  - Hoyler, Friedrich
A1  - White, D.H.
A1  - Hoff, R. W.
T1  - Nuclear structure of 241Pu from neutron-capture, (d,p)-, and (d,t)-reaction measurements / D. H. White ; R. W. Hoff ... F. Hoyler ...
JF  - Physical review / C. 57 (1998), H. 3
Y1  - 1998
SN  - 0556-2813
SP  - 1112
EP  - 1133
ER  - 
TY  - JOUR
A1  - Grajewski, Matthias
A1  - Köster, Michael
A1  - Turek, Stefam
T1  - Numerical analysis and implementational aspects of a new multilevel grid deformation method
JF  - Applied Numerical Mathematics
N2  - Recently, we introduced and mathematically analysed a new method for grid deformation (Grajewski et al., 2009) [15] we call basic deformation method (BDM) here. It generalises the method proposed by Liao et al. (Bochev et al., 1996; Cai et al., 2004; Liao and Anderson, 1992) [4], [6], [20]. In this article, we employ the BDM as core of a new multilevel deformation method (MDM) which leads to vast improvements regarding robustness, accuracy and speed. We achieve this by splitting up the deformation process in a sequence of easier subproblems and by exploiting grid hierarchy. Being of optimal asymptotic complexity, we experience speed-ups up to a factor of 15 in our test cases compared to the BDM. This gives our MDM the potential for tackling large grids and time-dependent problems, where possibly the grid must be dynamically deformed once per time step according to the user's needs. Moreover, we elaborate on implementational aspects, in particular efficient grid searching, which is a key ingredient of the BDM.
Y1  - 2010
U6  - https://doi.org/10.1016/j.apnum.2010.03.017
SN  - 0168-9274
VL  - 60
IS  - 8
SP  - 767
EP  - 781
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Grajewski, Matthias
A1  - Hron, Jaroslav
A1  - Turek, Stefan
T1  - Numerical analysis for a new non-conforming linear finite element on quadrilaterals
JF  - Journal of Computational and Applied Mathematics
Y1  - 2006
U6  - https://doi.org/10.1016/j.cam.2005.05.024
SN  - 0377-0427
VL  - 193
IS  - 1
SP  - 38
EP  - 50
ER  - 
TY  - JOUR
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Numerical analysis of the in-plane behaviour of decoupled masonry infilled RC frames
JF  - Engineering Structures
N2  - Damage of reinforced concrete (RC) frames with masonry infill walls has been observed after many earthquakes. Brittle behaviour of the masonry infills in combination with the ductile behaviour of the RC frames makes infill walls prone to damage during earthquakes. Interstory deformations lead to an interaction between the infill and the RC frame, which affects the structural response. The result of this interaction is significant damage to the infill wall and sometimes to the surrounding structural system too. In most design codes, infill walls are considered as non-structural elements and neglected in the design process, because taking into account the infills and considering the interaction between frame and infill in software packages can be complicated and impractical. A good way to avoid negative aspects arising from this behavior is to ensure no or low-interaction of the frame and infill wall, for instance by decoupling the infill from the frame. This paper presents the numerical study performed to investigate new connection system called INODIS (Innovative Decoupled Infill System) for decoupling infill walls from surrounding frame with the aim to postpone infill activation to high interstory drifts thus reducing infill/frame interaction and minimizing damage to both infills and frames. The experimental results are first used for calibration and validation of the numerical model, which is then employed for investigating the influence of the material parameters as well as infill’s and frame’s geometry on the in-plane behaviour of the infilled frames with the INODIS system. For all the investigated situations, simulation results show significant improvements in behaviour for decoupled infilled RC frames in comparison to the traditionally infilled frames.
KW  - Seismic loading
KW  - Earthquake
KW  - In-plane performance, isolation
KW  - Infill wall design
KW  - Numerical modelling
Y1  - 2022
U6  - https://doi.org/10.1016/j.engstruct.2022.114959
SN  - 0141-0296
VL  - 272
IS  - 1
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Abanteriba, Sylvester
T1  - Numerical and Experimental Evaluation of a Dual-Fuel Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications
JF  - Journal of Thermal Science and Engineering Applications
Y1  - 2019
U6  - https://doi.org/10.1115/1.4041495
SN  - 19485085
N1  - Paper No: GT2017-64795
VL  - 11
IS  - 1
SP  - 011015
PB  - ASME
CY  - New York
ER  - 
TY  - JOUR
A1  - Robinson, A. E.
A1  - Funke, Harald
A1  - Wagemakers, R.
A1  - Grossen, J.
A1  - Bosschaerts, W.
A1  - Hendrick, P.
T1  - Numerical and Experimental Investigation of a Micromix Combustor for a Hydrogen Fuelled μ-Scale Gas Turbine
JF  - Proceedings of the ASME Turbo Expo 2009 : : presented at the 2009 ASME Turbo Expo, June 8 - 12, 2009, Orlando, Florida, USA / sponsored by the International Gas Turbine Institute
Y1  - 2009
SN  - 9780791848869
N1  - GT2009-60061
SP  - 253
EP  - 262
PB  - ASME
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel
JF  - ISIJ international
Y1  - 2011
SN  - 1347-5460 (E-Journal); 0915-1559 (Print)
VL  - Vol. 51
IS  - No. 3
SP  - 429
EP  - 434
PB  - ISIJ
CY  - Tōkyō
ER  - 
TY  - JOUR
A1  - Bohn, Dieter
A1  - Funke, Harald
A1  - Heuer, Tom
A1  - Bütikofer, J.
T1  - Numerical and experimental investigations of the influence of different swirl-ratios on the temperature streak equalization in a 4-stage turbine
JF  - ASME Turbo Expo 2000 ; Munich, May 8-11 2000
Y1  - 2000
N1  - ASME-paper ; 2000-GT-250
CY  - Munich
ER  - 
TY  - JOUR
A1  - Bohn, Dieter
A1  - Funke, Harald
A1  - Sürken, Norbert
A1  - Kreitmeier, F.
T1  - Numerical and experimental investigations on endwall contouring in a four-stage turbine
JF  - ASME Turbo Expo Land Sea & Air 2001 : June 4 - 8, 2001, New Orleans, Louisiana / IGTI, International Gas Turbine Institute. American Society of Mechanical Engineers. International Gas Turbine Institute ..
Y1  - 2001
SN  - 0-7918-3528-6
N1  - ASME-Paper 2001-GT-0481
PB  - ASME
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Bohn, D.
A1  - Funke, Harald
A1  - Gier, J.
T1  - Numerical and Experimental Investigations on the Flow in a 4-Stage Turbine with Special Focus on the Development of a Radial Temperature Streak
JF  - ASME Turbo Expo 1999, Indianapolis, USA, 1999
Y1  - 1999
N1  - ASME-Paper 99-GT-027
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Mai, A.
A1  - Waluga, C.
A1  - Bergmann, B.
A1  - Tran, L.
A1  - Vonderstein, K.
A1  - Behr, M.
A1  - Mottaghy, K.
T1  - Numerical Modeling of Flow-Related Thrombus Formation under Physiological and Non-Physiological Flow Conditions
JF  - Acta Physiologica
Y1  - 2010
SN  - 1748-1716
N1  - Joint Congress of the Scandinavian and German Physiological Societies, Copenhagen, Denmark, March 27-30, 2010
VL  - 198
IS  - Supplement 677
SP  - 185
ER  - 
TY  - JOUR
A1  - Zastrow, Udo
T1  - Numerical plane stress analysis by integral equations based on the singularity method
JF  - SM archives . 10 (1985)
Y1  - 1985
SN  - 0376-7426
SP  - 113
EP  - 128
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Probst, M.
A1  - Mai, A.
A1  - Behr, M.
A1  - Tran, L.
A1  - Vonderstein, K.
A1  - Mottaghy, K.
T1  - Numerical Prediction of Blood Damage in Biomedical Devices
Y1  - 2010
N1  - Posterpresentation ; Biomedica Congress, Aachen, March 17-18, 2010
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Tran, L.
A1  - Jockenhövel, S.
A1  - Behr, M.
A1  - Mottaghy, K.
T1  - Numerical prediction of thrombocyte reactions for application to a vascular flow model
JF  - British Journal of Surgery
Y1  - 2011
SN  - 1365-2168
N1  - 46th Congress of the European Society for Surgical Research, Aachen, Germany, 25-28 May 2011 ; ESSR Abstracts 2011 ; Oral Sessions OP10-5
VL  - 98
IS  - S5
SP  - S17
PB  - Oxford University Press
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sesov, Vlatko
A1  - Cvetanovska, Julijana
A1  - Gjorgiev, Igor
T1  - Numerical simulation of geotechnical problems by coupled finite and infinite elements
JF  - Journal of civil engineering and architecture
Y1  - 2013
SN  - 1934-7359 (E-Journal)
VL  - 7
IS  - 1
SP  - 68
EP  - 77
PB  - David Publishing
CY  - Libertyville
ER  -