TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
T1  - Verbundverhalten der polymeren Interphase in textibewehrtem Beton
T2  - 2. Doktorandenseminar Klebtechnik : Vorträge der gleichnamigen Veranstaltung in Dresden am 5. und 6. September 2011. (DVS-Berichte ; 292)
Y1  - 2012
SN  - 978-3-87155-599-2
SP  - 50
EP  - 56
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
A1  - Füssel, Uwe
A1  - Schnick, Michael
A1  - Hertel, Martin
A1  - Jaeckel, Sebastian
T1  - Modelling and visualisation of the GMA process
JF  - Welding and Cutting
Y1  - 2012
SN  - 1612-3433
VL  - 11
IS  - 4
SP  - 242
EP  - 249
PB  - DVS Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Andrej
T1  - Application of electron beam welding to fabrication of steel-aluminium dissimilar joint
T2  - Beam technologies & laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012
Y1  - 2012
SP  - 265
EP  - 279
PB  - Publ. House
CY  - Saint Petersburg
ER  - 
TY  - THES
A1  - Hellmanns, Mark
T1  - Qualitätssicherung von handgeführten Applikationsprozessen durch Nachverfolgung der Handhabungseinheit. (Fortschrittsberichte aus der Produktionstechnik ; 1)
Y1  - 2012
SN  - 978-3-8440-1379-5
N1  - Zugl.: Kassel, Univ., Diss., 2012
PB  - Aachen
CY  - Shaker
ER  - 
TY  - CHAP
A1  - Goldbach, Daniel
T1  - Zuverlässigkeitsanalyse zur Verifikation der Einhaltung von quantitativen Sicherheitsanforderungen.
T2  - Diagnose in mechatronischen Fahrzeugsystemen V : neue Verfahren für Test, Prüfung und Diagnose von E/E-Systemen im Kfz ; [anlässlich der 6. Tagung "Diagnose in Mechatronischen Fahrzeugsystemen" in Dresden]. Bernard Bäker ... (Hrsg.)
Y1  - 2012
SN  - 978-3-8169-3149-2
SP  - 116
EP  - 132
PB  - Expert Verlag
CY  - Renningen
ER  - 
TY  - JOUR
A1  - Borgmeier, Claudia
A1  - Bongaerts, Johannes
A1  - Meinhardt, Friedhelm
T1  - Genetic analysis of the Bacillus licheniformis degSU operon and the impact of regulatory mutations on protease production
JF  - Journal of biotechnology
N2  - Disruption experiments targeted at the Bacillus licheniformis degSU operon and GFP-reporter analysis provided evidence for promoter activity immediately upstream of degU. pMutin mediated concomitant introduction of the degU32 allele – known to cause hypersecretion in Bacillus subtilis – resulted in a marked increase in protease activity. Application of 5-fluorouracil based counterselection through establishment of a phosphoribosyltransferase deficient Δupp strain eventually facilitated the marker-free introduction of degU32 leading to further protease enhancement achieving levels as for hypersecreting wild strains in which degU was overexpressed. Surprisingly, deletion of rapG – known to interfere with DegU DNA-binding in B. subtilis – did not enhance protease production neither in the wild type nor in the degU32 strain. The combination of degU32 and Δupp counterselection in the type strain is not only equally effective as in hypersecreting wild strains with respect to protease production but furthermore facilitates genetic strain improvement aiming at biological containment and effectiveness of biotechnological processes.
KW  - Marker-free mutagenesis
KW  - Extracellular enzymes
KW  - Uracil-phosphoribosyltransferase
KW  - Hypersecretion
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.jbiotec.2012.02.011
SN  - 1873-4863 (E-Journal); 0168-1656 (Print)
VL  - 159
IS  - 1-2
SP  - 12
EP  - 20
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Boettcher, Martin
A1  - Haselhuhn, Angelika
A1  - Jakse, Gerhard
A1  - Brehmer, Bernhard
A1  - Kirschner-Hermanns, Ruth
T1  - Overactive bladder syndrome: an underestimated long-term problem after treatment of patients with localized prostate cancer?
JF  - BJU international
N2  - In this study we observed courses of micturition symptoms and differentiated degrees of symptoms for each point in time while also considering the impact of bothersomeness. Our data show that not only significantly more patients who have undergone BT suffer from OAB than those who have undergone RP, but also that those affected show significantly higher values for severity of OAB symptoms throughout the whole observation period of 36 months. Our data analysis further shows that variability of OAB symptoms as well as fluctuation of severity of OAB symptoms vary to a significantly higher degree after BT than after RP. Looking only at mean figures at a given point in time clearly underestimates the underlying problem. This fact is not reflected in the literature.
KW  - quality of life
KW  - prostate cancer
KW  - prostatectomy
KW  - incontinence
KW  - brachytherapy
Y1  - 2012
U6  - http://dx.doi.org/10.1111/j.1464-410X.2011.10623.x
SN  - 1365-2176 (E-Journal); 1464-410X (E-Journal); 0007-1331 (Print); 1464-4096 (Print)
VL  - 109
IS  - 12
SP  - 1824
EP  - 1830
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Initial stage of two-dimensional dam-break waves: laboratory versus VOF
JF  - Journal of hydraulic research
N2  - Since several decades, dam-break waves have been of main research interest. Mathematical approaches have been developed by analytical, physical and numerical models within the past 120 years. During the past 10 years, the number of research investigations has increased due to improved measurement techniques as well as significantly increased computer memories and performances. In this context, the present research deals with the initial stage of two-dimensional dam-break waves by comparing physical and numerical model results as well as analytical approaches. High-speed images and resulting particle image velocimetry calculations are thereby compared with the numerical volume-of-fluid (VOF) method, included in the commercial code FLOW-3D. Wave profiles and drag forces on placed obstacles are analysed in detail. Generally, a good agreement between the laboratory and VOF results is found.
KW  - VOF
KW  - PIV
KW  - physical model
KW  - numerical model
KW  - drag force
KW  - dam-break
Y1  - 2012
U6  - http://dx.doi.org/10.1080/00221686.2011.639981
SN  - 1814-2079 (E-Journal); 0022-1686 (Print)
VL  - 50
IS  - 1
SP  - 89
EP  - 97
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Feldmann, Markus
A1  - Pyschny, D.
A1  - Döring, Bernd
A1  - Kuhnhenne, Markus
T1  - Life cycle assessment of steel constructions
T2  - Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012
Y1  - 2012
SN  - 978-0-203-10336-4
SP  - 321
PB  - Taylor and Francis
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Kuhnhenne, Markus
A1  - Döring, Bernd
A1  - Pyschny, Dominik
A1  - Feldmann, Markus
T1  - Energy efficient sandwich construction
T2  - Proceedings of the VI International Congress on Architectural Envelopes : 20.6. - 22.6.2012, San Sebastian, Spain
Y1  - 2012
SP  - 277
EP  - 285
PB  - ICAE
ER  - 
TY  - CHAP
A1  - Achenbach, Timm
A1  - Geimer, Konstantin
A1  - Lynen, Arthur
A1  - Göttsche, Joachim
A1  - Hoffschmidt, Bernhard
T1  - Simulation of thermo-mechanical processes in open volumetric absorber modules
T2  - SolarPaces 2012 : concentrating solar power and chemical energy systems : Sept. 11 - 14 2012, Marrakech, Marokko
Y1  - 2012
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Hötter, Jan-Steffen
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Selective laser melting of metals: desktop machines open up new chances even for small companies
JF  - Advanced materials research
N2  - Additive manufacturing (AM) of metal parts by using Selective Laser Melting (SLM) has become a powerful tool mostly in the area of automotive, aerospace engineering and others. Especially in the field of dentistry, jewelry and related branches that require individualized or even one-of-a-kind products, the direct digital manufacturing process opens up new ways of design and manufacturing. In these fields, mostly small and medium sized businesses (SME) are operating which do not have sufficient human and economic resources to invest in this technology. But to stay competitive, the application of AM can be regarded as a necessity. In this situation a new desktop machine (Realizer SLM 50) was introduced that cost about 1/3 of a shop floor SLM machine and promises small quality parts. To find out whether the machine really is an alternative for SMEs the University of Applied Science, Aachen, Germany, designed, build and optimized typical parts from the dentistry and the jewelry branches using CoCr and silver material, the latter being new with this application. The paper describes the SLM procedure and how to find and optimize the most important parameters. The test is accompanied by digital simulation in order to verify the build parameters and to plan future builds. The procedure is shown as well as the resulting parts made from CoCr and silver material.
Y1  - 2012
U6  - http://dx.doi.org/10.4028/www.scientific.net/AMR.622-623.461
SN  - 1662-8985 (E-Journal); 1022-6680 (Print)
VL  - 622-623
SP  - 461
EP  - 465
PB  - Trans Tech Publ.
CY  - Baech
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Sun, Q.
A1  - Meireles, I.
A1  - Matos, J.
A1  - Viseu, T.
T1  - USBR type III stilling basin performance for steep stepped spillways
T2  - Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto
Y1  - 2012
SN  - 978-989-8509-01-7
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel B.
T1  - Characteristics of cross-bar block ramp flows
T2  - Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto
Y1  - 2012
SN  - 978-989-8509-01-7
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
T1  - Sensitivity of phase detection techniques in aerated chute flows to hydraulic design parameters
T2  - 2nd European IAHR congress : 27. - 29. June 2012, München
Y1  - 2012
SN  - 978-3-943683-03-5
SP  - Artikelkennnummer: B15
PB  - Lehrstuhl u. Versuchsanst. für Wasserbau u. Wasserwirtschaft d. TU München
CY  - München
ER  - 
TY  - CHAP
A1  - Schlurmann, Torsten
A1  - Bung, Daniel B.
T1  - Experimental investigation of flow-induced radial gate vibrations at Lower Subansiri dam
T2  - Sixth Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : JOINT 2012 : 23.-29.9.2012, Keelung
Y1  - 2012
SP  - 7
EP  - 14
ER  - 
TY  - BOOK
A1  - Wählisch, Georg
T1  - Technisches Zeichnen : Lösungsvorschläge für das Selbststudium. (Berichte aus dem Maschinenbau)
Y1  - 2012
SN  - 978-3-8440-1159-3
PB  - Shaker
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Knüppel, Mark
ED  - Federmann, Rudolf
ED  - Kußmaul, Heinz
ED  - Müller, Stefan
T1  - Außerbilanzielle Korrekturen
JF  - Handbuch der Bilanzierung online
Y1  - 2012
SN  - 0172-0392
SP  - Artikel HI 1380074
PB  - Haufe
CY  - Freiburg
ER  - 
TY  - BOOK
A1  - Thomas, Axel
T1  - Rhetorische Knallfrösche - reloaded  : Zitatensammlung für Politik und Wirtschaft
Y1  - 2012
PB  - Neck + Heyn
CY  - Aachen
ER  - 
TY  - PAT
A1  - Ahlborn, Kristina
A1  - Gerlach, Frank
A1  - Iken, Heiko
A1  - Schöning, Michael Josef
A1  - Vonau, Winfried
T1  - Miniaturisierte, potentiometrische Indikatorelektrode und Verfahren zu deren Herstellung : Offenlegungsschrift
Y1  - 2012
ER  -