TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel Bernhard
T1  - Characteristics of cross-bar block ramp flows
T2  - Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto
Y1  - 2012
SN  - 978-989-8509-01-7
ER  - 
TY  - CHAP
A1  - Schlurmann, Torsten
A1  - Bung, Daniel Bernhard
T1  - Experimental investigation of flow-induced radial gate vibrations at Lower Subansiri dam
T2  - Sixth Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : JOINT 2012 : 23.-29.9.2012, Keelung
Y1  - 2012
SP  - 7
EP  - 14
ER  - 
TY  - JOUR
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Caesar: an intelligent domestic service robot
JF  - Intelligent service robotics
N2  - In this paper we present CAESAR, an intelligent domestic service robot. In domestic settings for service robots complex tasks have to be accomplished. Those tasks benefit from deliberation, from robust action execution and from flexible methods for human–robot interaction that account for qualitative notions used in natural language as well as human fallibility. Our robot CAESAR deploys AI techniques on several levels of its system architecture. On the low-level side, system modules for localization or navigation make, for instance, use of path-planning methods, heuristic search, and Bayesian filters. For face recognition and human–machine interaction, random trees and well-known methods from natural language processing are deployed. For deliberation, we use the robot programming and plan language READYLOG, which was developed for the high-level control of agents and robots; it allows combining programming the behaviour using planning to find a course of action. READYLOG is a variant of the robot programming language Golog. We extended READYLOG to be able to cope with qualitative notions of space frequently used by humans, such as “near” and “far”. This facilitates human–robot interaction by bridging the gap between human natural language and the numerical values needed by the robot. Further, we use READYLOG to increase the flexible interpretation of human commands with decision-theoretic planning. We give an overview of the different methods deployed in CAESAR and show the applicability of a system equipped with these AI techniques in domestic service robotics
Y1  - 2012
U6  - https://doi.org/10.1007/s11370-012-0118-y
SN  - 1861-2776
N1  - Special Issue on Artificial Intelligence Techniques for Robotics: Sensing, Representation and Action, Part I
VL  - 5
IS  - 4
SP  - 259
EP  - 276
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Hoffschmidt, Bernhard
A1  - Alexopoulos, Spiros
A1  - Rau, Christoph
A1  - Sattler, Johannes Christoph
A1  - Anthrakidis, Anette
A1  - Teixeira Boura, Cristiano José
A1  - O'Connor, P.
A1  - Hilger, Patrick
T1  - Concentrating solar power
T2  - Comprehensive renewable energy / ed. Ali Sayigh. Vol. 3: Solar thermal systems: components and applications
Y1  - 2012
SN  - 978-0-08-087872-0
U6  - https://doi.org/10.1016/B978-0-08-087872-0.00319-X
VL  - 3
SP  - 595
EP  - 636
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Becker, Jörg
A1  - Delfmann, Patrick
A1  - Eggert, Mathias
A1  - Schwittay, Sebastian
T1  - Generalizability and Applicability of Model-Based Business Process Compliance-Checking Approaches — A State-of-the-Art Analysis and Research Roadmap
JF  - Business Research : BuR
N2  - With a steady increase of regulatory requirements for business processes, automation support of compliance management is a field garnering increasing attention in Information Systems research. Several approaches have been developed to support compliance checking of process models. One major challenge for such approaches is their ability to handle different modeling techniques and compliance rules in order to enable widespread adoption and application. Applying a structured literature search strategy, we reflect and discuss compliance-checking approaches in order to provide an insight into their generalizability and evaluation. The results imply that current approaches mainly focus on special modeling techniques and/or a restricted set of types of compliance rules. Most approaches abstain from real-world evaluation which raises the question of their practical applicability. Referring to the search results, we propose a roadmap for further research in model-based business process compliance checking.
Y1  - 2012
U6  - https://doi.org/10.1007/BF03342739
SN  - 1866-8658
VL  - 5
IS  - 2
SP  - 221
EP  - 247
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Lohse, Wolfram
A1  - Stroetmann, Richard
ED  - Vismann, Ulrich
T1  - Stahlbau
T2  - Wendehorst Bautechnische Zahlentafeln
Y1  - 2012
SN  - 978-3-8348-0960-5
U6  - https://doi.org/10.1007/978-3-8348-8613-2_13
N1  - Kapitel 13
SP  - 777
EP  - 1019
PB  - Vieweg + Teubner
CY  - Wiesbaden
ET  - 34
ER  - 
TY  - CHAP
A1  - Oertel, Mario
A1  - Bung, Daniel Bernhard
A1  - Schlenkhoff, Andreas
ED  - Carstensen, Dirk
T1  - Blocksteinrampen in Riegelbauweise : Neue Bemessungsansätze
T2  - Staubauwerke : planen, bauen, betreiben; 35. Dresdner Wasserbaukolloquium 2012, 08. - 09. März 2012
Y1  - 2012
SN  - 978-3-86780-261-1
SP  - 317
EP  - 326
PB  - Selbstverl. der Techn. Univ.
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Ritz, Thomas
A1  - Terhaar, Kristin
A1  - Wallenborn, Ramona
ED  - Reiterer, Harald
T1  - HMI für eCarSharing : ein Baustein für nachhaltige Mobilität
T2  - Mensch & Computer 2012 - Workshopband : 12. Fachübergreifende Konferenz für interaktive und kooperative Medien ; interaktiv informiert - allgegenwärtig und allumfassend!?
Y1  - 2012
SN  - 978-3-486-71990-1 (Print)
SN  - 978-3-486-71991-8 (E-Book)
U6  - https://doi.org/10.1524/9783486719918.341
N1  - Workshop Automotive HMI
SP  - 381
EP  - 388
PB  - Oldenbourg
CY  - München
ER  - 
TY  - JOUR
A1  - Bähr, Brigitte
T1  - [Gert Hoepner] im Interview zum Thema ; Verpackungspolitik - mehr als Hülle
JF  - Packaging journal : Technologie, Logistik, Marketing, Produkte
Y1  - 2012
SN  - 1610-0336
IS  - 5
SP  - 78
EP  - 80
PB  - Ella Verlag
CY  - Hürth
ER  - 
TY  - JOUR
A1  - Lempiäinen, Harri
A1  - Couttet, Philippe
A1  - Bolognani, Federico
A1  - Müller, Arne
A1  - Dubost, Valérie
A1  - Luisier, Raphaëlle
A1  - Rio-Espinola, Alberto del
A1  - Vitry, Veronique
A1  - Unterberger, Elif B.
A1  - Thomson, John P.
A1  - Treindl, Fridolin
A1  - Metzger, Ute
A1  - Wrzodek, Clemens
A1  - Hahne, Florian
A1  - Zollinger, Tulipan
A1  - Brasa, Sarah
A1  - Kalteis, Magdalena
A1  - Marcellin, Magali
A1  - Giudicelli, Fanny
A1  - Braeuning, Albert
A1  - Morawiec, Laurent
A1  - Zamurovic, Natasa
A1  - Längle, Ulrich
A1  - Scheer, Nico
A1  - Schübeler, Dirk
A1  - Goodman, Jay
A1  - Chibout, Salah-Dine
A1  - Marlowe, Jennifer
A1  - Theil, Dietlinde
A1  - Heard, David J.
A1  - Grenet, Olivier
A1  - Zell, Andreas
A1  - Templin, Markus F.
A1  - Meehan, Richard R.
A1  - Wolf, Roland C.
A1  - Elcombe, Clifford R.
A1  - Schwarz, Michael
A1  - Moulin, Pierre
A1  - Terranova, Rémi
A1  - Moggs, Jonathan G.
T1  - Identification of Dlk1-Dio3 imprinted gene cluster non-coding RNAs as novel candidate biomarkers for liver tumor promotion
JF  - Toxicological Sciences
N2  - The molecular events during nongenotoxic carcinogenesis and their temporal order are poorly understood but thought to include long-lasting perturbations of gene expression. Here, we have investigated the temporal sequence of molecular and pathological perturbations at early stages of phenobarbital (PB) mediated liver tumor promotion in vivo. Molecular profiling (mRNA, microRNA [miRNA], DNA methylation, and proteins) of mouse liver during 13 weeks of PB treatment revealed progressive increases in hepatic expression of long noncoding RNAs and miRNAs originating from the Dlk1-Dio3 imprinted gene cluster, a locus that has recently been associated with stem cell pluripotency in mice and various neoplasms in humans. PB induction of the Dlk1-Dio3 cluster noncoding RNA (ncRNA) Meg3 was localized to glutamine synthetase-positive hypertrophic perivenous hepatocytes, sug- gesting a role for β-catenin signaling in the dysregulation of Dlk1-Dio3 ncRNAs. The carcinogenic relevance of Dlk1-Dio3 locus ncRNA induction was further supported by in vivo genetic dependence on constitutive androstane receptor and β-catenin pathways. Our data identify Dlk1-Dio3 ncRNAs as novel candidate early biomarkers for mouse liver tumor promotion and provide new opportunities for assessing the carcinogenic potential of novel compounds.
Y1  - 2012
U6  - https://doi.org/10.1093/toxsci/kfs303
SN  - 1094-2025
VL  - 131
IS  - 2
SP  - 375
EP  - 386
PB  - Oxford University Press
CY  - Oxford
ER  - 
TY  - THES
A1  - Bragard, Michael
T1  - The integrated emitter turn-off thyristor : an innovative MOS-gated high-power device. - (Aachener Beiträge des ISEA ; 62)
N2  - This thesis introduces the Integrated Emitter Turn-Off (IETO) Thyristor as a new high-power device. Known state-of-the-art research activities like the Dual GCT, the ETO thyristor and the ICT were presented and critically reviewed. A comparison with commercialized solutions identifies the pros and cons of each type of device family. Based on this analysis, the IETO structure is proposed, covering most benefits of each device class. In particular the combination of a MOS-assisted turn-off with a thyristor-based device allows a voltage-controlled MOS switching and the low on-state voltage of the thyristors. The following synthesis of an IETO device stands on a three-dimensional field of optimization spanned by electric, mechanical and thermal aspects. From an electric point of view, the lowest possible parasitic inductance and resistance within the commutation path are optimization criteria. The mechanical construction has to withstand the required contact pressure of multiple kilo Newtons. Finally, thermal borders limit the maximum average current of the device. FEM simulations covering these three aspects are performed for several design proposals. An IETO prototype is constructed and measurements on various test benches attest thermal, mechanical and electric performance. A local decoupling of the external driver stage and the presspack housing is presented by a cable connection. This separation enables a thermal and mechanical independence, which is advantageous in terms of vibrations and thermal cycles including increased reliability. The electric pulse performance of the prototype device is a factor of 3.1 above today''s solutions. In single-pulse measurements, a current up to 1600 A was successfully turned off at 115°C with an active silicon area of 823 mm². One reason for this increased turn-off capability is the extremely low-inductive construction. Additional functionality of the IETO thyristor like over-current self-protection and defined short-circuit failure state are successfully verified.
Y1  - 2012
SN  - 978-3-8440-1152-4
N1  - Zugl.: Aachen, Techn. Hochsch., Diss., 2012
PB  - Shaker
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Fabo, Sabine
T1  - Die Kunst der Irritation und ihr Mehrwert
T2  - Vielen Dank für Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien
Y1  - 2012
SN  - 978-3-8376-2170-9
SP  - 112
EP  - 145
PB  - Transcript Verlag
CY  - Bielefeld
ER  - 
TY  - JOUR
A1  - Wolf, Martin R.
T1  - Von Security Awareness zum Secure Behaviour
JF  - Hakin9 Extra – IT-Forensik
N2  - Security Awareness ist derzeit ein viel diskutiertes Thema. Es reicht nicht, einfach nur ein paar technische Systeme (z.B. Firewalls) zu installieren, um ein angemessenes Schutzniveau zu erzielen. Neben einer guten Organisation von IT Security ist es auch notwendig, den Mitarbeiter einzubinden. Der vielzitierte "Faktor Mensch" ist derjenige, der die Technik korrekt anwenden muss und der durch falsches Verhalten technische und organisatorische Schutzmaßnahmen aushebeln kann. Deshalb reicht es nicht aus, wenn sich der Mitarbeiter der Gefahren bewusst ("aware") ist, er muss auch dementsprechend "sicher" handeln.
Y1  - 2012
SN  - 1733-7186
VL  - 2012
IS  - 5
SP  - 18
EP  - 19
PB  - Software Wydawnictwo
CY  - Warszawa
ER  - 
TY  - JOUR
A1  - Rigling, Andreas
A1  - Elkin, Ché
A1  - Dobbertin, Matthias
A1  - Eilmann, Britta
A1  - Giuggiola, Arnaud
A1  - Wohlgemuth, Thomas
A1  - Bugmann, Harald
T1  - Wald und Klimawandel in der inneralpinen Trockenregion Visp
JF  - Schweizerische Zeitschrift für Forstwesen
N2  - Der Temperaturanstieg der vergangenen Jahrzehnte war in Gebirgsregionen besonders ausgeprägt. Sollte sich dieser Temperaturtrend im 21. Jahrhundert fortsetzen, dann dürf-ten sich auch die Häufigkeit und Intensität von Niederschlä-gen und Trockenperioden verändern, was die Waldwirtschaft vor grosse Herausforderungen stellen wird. Trockenheit ist ein entscheidender Faktor für die Waldökosysteme der inner-alpinen Täler, wo seit Jahren trockenheitsbedingtes Baum-sterben festgestellt wird. Der vorliegende Beitrag hat zum Ziel, die Sensitivität der verschiedenen Waldökosysteme ge-genüber Klimawandel und alternative, teilweise extreme Bewirtschaftungsvarianten in der Region Visp zu testen. Me-thodische Ansätze wie Monitoring, Feldexperimente und dy-namische Modellierung wurden kombiniert, und es wurden verschiedene Ökosystemleistungen berücksichtigt, so Holz-produktion, Schutz vor Naturgefahren, Kohlenstoffspeiche-rung und Aspekte der Biodiversität. Die Resultate deuten da-rauf hin, dass auf den Trockenstandorten der Tieflagen die einheimischen Baumarten an ihre physiologischen Grenzen stossen und längerfristig über alternative Baumarten nach-gedacht werden sollte. In den mittleren Lagen dürften Tro-ckenheit und Schadinsekten wie die Borkenkäfer die zukünf-tige Waldentwicklung steuern. In den Hochlagen hingegen werden sich die Wälder ausdehnen und besser wachsen als heute. Alle untersuchten Ökosystemleistungen werden ge-bietsweise starken Veränderungen unterworfen sein. Die dis-kutierten Bewirtschaftungsvarianten scheinen dazu geeignet, die Wasserverfügbarkeit der Bestände, hauptsächlich in tief-eren Lagen, zu erhöhen und dadurch die Widerstandskraft der Bäume gegenüber Trockenperioden vorübergehend zu stärken. Es ist aber davon ausgehen, dass nur verhältnismäs-sig starke Eingriffe wesentliche Effekte erzielen können. Die Verknüpfung von Umweltmonitoring, Feldexperimenten und Modellierung unter Miteinbezug von Ökosystemleistungen ist vielversprechend, da sie eine differenzierte Abschätzung des zukünftigen Landschaftswandels und seiner Effekte auf die Waldleistungen ermöglicht.
Y1  - 2012
U6  - https://doi.org/10.3188/szf.2012.0481
SN  - 2235-1469 (Online)
SN  - 0036-7818 (Print)
VL  - 163
IS  - 12
SP  - 481
EP  - 492
PB  - Schweizerischer Forstverein
CY  - Zürich
ER  - 
TY  - GEN
A1  - Schumann, C.
A1  - Rogin, S.
A1  - Schneider, H.
A1  - Oster, J.
A1  - Tippkötter, Nils
A1  - Kampeis, P.
T1  - Steuerung von HGMS-Prozessen mittels Durchflusszytometrie
T2  - Chemie Ingenieur Technik
N2  - Die Hochgradientenmagnetseparation (HGMS) ist eine Methode zur Aufreinigung von biopharmazeutischen Produkten. Mit dieser Methode lässt sich in nur einem Schritt eine Fest/Fest/Flüssig-Trennung erzielen, was zu einer erheblichen Zeit- und Kostenersparnis im Downstreaming führt. Dennoch steht ihr industrieller Einsatz noch aus, was u. a. am Mangel an Analysenmethoden liegt, um die HGMS quantifizierbar zu machen. Gerade in der Pharmaproduktion werden Prozesse gebraucht, die gemäß den einschlägigen Vorschriften (cGMP) validiert und deren verfahrenstechnische Anlagenteile qualifiziert werden können. Die Schwierigkeit ist die Messung der magnetischen Mikrosorbentien in der Suspension, in der auch Zellen oder Zelltrümmer vorliegen. Im Rahmen eines Forschungsprojektes im „Zentralen Innovationsprogramm Mittelstand“ des BMWi wurden verschiedene Analysenmethoden untersucht. Die Durchflusszytometrie ermöglicht eine Charakterisierung von Partikeln und eine simultane quantitative Messung. Durch die multiparametrige Messung kann zwischen Zellen, Zelltrümmern und Magnetpartikeln unterschieden werden. Die At-line-Einbindung des Durchflusszytometers ist durch den Einsatz einer externen Pumpe möglich. Über eine automatisierte Messwertanalyse kann der HGMS-Prozess mittels der Durchflusszytometrie gesteuert werden.
Y1  - 2012
U6  - https://doi.org/10.1002/cite.201250125
SN  - 0009-286X
SN  - 1522-2640 (eISSN)
N1  - ProcessNet-Jahrestagung 2012 und 30. DECHEMA-Jahrestagung der Biotechnologen, 10. – 13. September 2012, Karlsruhe
N1  - Dieses Projekt wurde gefördert durch das Bundesministerium für Wirtschaft und Technologie
VL  - 84
IS  - 8
SP  - 1370
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - GEN
A1  - Lindel, Tomasz Dawid
A1  - Greiser, Andreas
A1  - Waxman, Patrick
A1  - Dietterle, Martin
A1  - Seifert, Frank
A1  - Fontius, Ulrich
A1  - Renz, Wolfgang
A1  - Dieringer, Matthias A.
A1  - Frauenrath, Tobias
A1  - Schulz-Menger, Jeanette
A1  - Niendorf, Thoralf
A1  - Ittermann, Bernd
T1  - Cardiac CINE MRI at 7 T using a transmit array
T2  - 2012 ISMRM Annual Meeting Proceedings
N2  - With its need for high SNR and short acquisition times, Cardiac MRI (CMR) is an intriguing target application for ultrahigh field MRI. Due to the sheer size of the upper torso, however, the known RF issues of 7T MRI are also most prominent in CMR. Recent years brought substantial progress but the full potential of the ultrahigh field for CMR is yet to be exploited. Parallel transmission (pTx) is a promising approach in this context and several groups have already reported B1 shimming for 7T CMR. In such a static pTx application amplitudes and phases of all Tx channels are adjusted individually but otherwise imaging techniques established in current clinical practice 1.5 T and 3 T are applied. More advanced forms of pTx as spatially selective excitation (SSE) using Transmit SENSE promise additional benefits like faster imaging with reduced fields of view or improved SAR control. SSE requires the full dynamic capabilities of pTx, however, and for the majority of today's implemented pTx hardware the internal synchronization of the Tx array does not easily permit external triggering as needed for CMR. Here we report a software solution to this problem and demonstrate the feasibility of CINE CMR at 7 T using a Tx array.
Y1  - 2012
SN  - 1545-4428
N1  - ISMRM 20th Annual Meeting & Exhibition, 5-11 May 2012, Melbourne, Australia
ER  - 
TY  - CHAP
A1  - Fabo, Sabine
T1  - Einführung
T2  - Vielen Dank für Ihren Einkauf : Konsumkultur aus Sicht von Design, Kunst und Medien
Y1  - 2012
SN  - 978-3-8376-2170-9
SP  - 9
EP  - 13
PB  - Transcript Verlag
CY  - Bielefeld
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Meyer, Thomas
T1  - A Brief Overview of Artificial Intelligence in South Africa
JF  - AI Magazine
N2  - South Africa in recent years is the establishment of a number of research hubs involved in AI activities ranging from mobile robotics and computational intelligence, to knowledge representation and reasoning, and human language technologies. In this survey we take the reader through a quick tour of the research being conducted at these hubs, and touch on an initiative to maintain and extend the current level of interest in AI research in the country.
Y1  - 2012
U6  - https://doi.org/10.1609/aimag.v33i1.2357
SN  - 0738-4602
VL  - 33
IS  - 1
SP  - 99
EP  - 101
PB  - AAAI
CY  - Menlo Park
ER  - 
TY  - JOUR
A1  - Bragard, Michael
A1  - van Hoek, H.
A1  - De Doncker, R. W.
T1  - A major design step in IETO concept realization that allows overcurrent protection and pushes limits of switching performance
JF  - IEEE transactions on power electronics
N2  - This paper presents the latest prototype of the integrated emitter turn-off thyristor concept, which potentially ranks among thyristor high-power devices like the gate turn-off thyristor and the integrated gate-commutated thyristor (IGCT). Due to modifications of the external driver stage and mechanical press-pack design optimization, this prototype allows for full device characterization. The turn-off capability was increased to 1600 A with an active silicon area of 823mm2 . This leads to a transient peak power of 672.1kW/cm² . Within this paper, measurements and concept assessment are presented and a comparison to state-of-the-art IGCT devices is provided.
Y1  - 2012
U6  - https://doi.org/10.1109/TPEL.2012.2189136
SN  - 0885-8993
VL  - 27
IS  - 9
SP  - 4163
EP  - 4171
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Rezension zu: Encyclopedia of Industrial Biotechnology, Vol. 1–7. By MC Flickinger.
JF  - Chemie Ingenieur Technik
Y1  - 2012
U6  - https://doi.org/10.1002/cite.201290052
SN  - 0009-286X
SN  - 1522-2640 (eISSN)
VL  - 6
IS  - 84
SP  - 936
PB  - Wiley-VCH
CY  - Weinheim
ER  -