TY - BOOK A1 - Pfeiffer, Johann T1 - Rechnergestützte Auslegung von Seiltrieben Y1 - 1993 N1 - Forschungsabschlussbericht der Fachhochschule Aachen, Fachbereich Maschinenbau und Mechatronik, Lehrgebiet Produktionslogistik PB - Fachhochsch. CY - Aachen ER - TY - BOOK A1 - Pfeiffer, Johann T1 - Rechnergestützte Auslegung von Seiltrieben - Praxisimplementierung Y1 - 1994 N1 - Forschungsabschlussbericht der Fachhochschule Aachen, Fachbereich Maschinenbau und Mechatronik, Lehrgebiet Produktionslogistik PB - Fachhochsch. CY - Aachen ER - TY - JOUR A1 - Starke, Günther A1 - Kremer-Wasmuth, S. T1 - Rechnergestützte Prozeßkontrolle und -dokumentation zur Qualitätsüberwachung beim Schweißen JF - Qualitätsorientierte Schweißtechnik als Wettbewerbsfaktor, DVS-Berichte. 196 (1999) Y1 - 1999 SN - 0418-9639 N1 - Report SP - 49 EP - 52 ER - TY - JOUR A1 - Heinrichs, Horst A1 - Weck, M. T1 - Rechnerunterstuetzte Aufbereitung von Finite-Elemente-Rechenmodellen -Erstellen der FEM-Netzwerke JF - Industrieanzeiger. 99 (1977), H. 102 Y1 - 1977 SP - 2059 EP - 2061 ER - TY - JOUR A1 - Heinrichs, Horst A1 - Weck, M. A1 - Heimann, A. T1 - Rechnerunterstuetzte Aufbereitung von Finite-Elemente-Rechenmodellen-Erfassung der Bauteilgeometrie JF - Industrieanzeiger. 99 (1977), H. 78 Y1 - 1977 SP - 1509 EP - 1512 ER - TY - JOUR A1 - Baatz, Udo A1 - Butz, Hans-Werner T1 - Rechnerunterstuetztes Konstruieren mit Symbolen JF - TZ für praktische Metallbearbeitung Y1 - 1972 SN - 0177-8900 VL - 66 IS - 9 SP - 366 EP - 370 PB - Grossmann CY - Stuttgart ER - TY - JOUR A1 - Willms, Herbert A1 - Beer, Stefan T1 - Regelung eines H(IND 2)/O(IND 2)-Dampferzeugers Y1 - 1992 SN - 0939-2963 N1 - Report: Regelung eines H(IND 2)/O(IND 2)-Dampferzeugers, Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Hardthausen am Kocher (DE). Inst. fuer Chemische Antriebe und Verfahrenstechnik, Sep 1992, (116 S. Gesamtumfang) ER - TY - BOOK A1 - Willms, Herbert A1 - Beer, Stefan T1 - Regelung eines H2/O2-Dampferzeugers Y1 - 1993 N1 - Forschungsbericht / Deutsche Forschungsanstalt für Luft- und Raumfahrt ; 93-02 ; als Ms. gedr. PB - DLR, Zentrale Allgemeine Dienste, Versand CY - Köln ER - TY - JOUR A1 - Willms, Herbert T1 - Regelung eines H2/O2-Dampferzeugers mit Hilfe eines modifizierten Zirkondioxid-Sensors JF - Chemie Ingenieur Technik Y1 - 1993 SN - 0009-286X VL - 65 IS - 8 SP - 954 EP - 956 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Willms, Herbert A1 - Beer, Stefan A1 - Fröhlke, K. A1 - Haidn, O.J. T1 - Regelung eines Wasserstoff-/Sauerstoff-Dampferzeugers mit Hilfe eines modifizierten Zirkondioxid-Sensors Y1 - 1993 N1 - Report: Deutsche Forschungsanstalt für Luft- und Raumfahrt, EN-CA/E (1993) Seite 1-17 (17 Seiten, 14 Bilder, 2 Tabellen, 14 Quellen) ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Pappas, D. P. A1 - Hopster, H. T1 - Reversible transition between perpendicular and in-plane magnetization in ultrathin films. Pappas, D. P.; Kämper, K.-P.; Hopster, H. JF - Physical Review Letters. 64 (1990), H. 26 Y1 - 1990 SN - 1079-7114 SP - 3179 EP - 3182 ER - TY - BOOK A1 - Thomas, Axel T1 - Rhetorische Knallfrösche - reloaded : Zitatensammlung für Politik und Wirtschaft Y1 - 2012 PB - Neck + Heyn CY - Aachen ER - TY - BOOK A1 - Thomas, Axel T1 - Rhetorische Knallfrösche : Zitatensammlung für Politik und Wirtschaft Y1 - 2010 SN - 978-3-00-033037-7 PB - Neck + Heyn CY - Aachen ER - TY - JOUR A1 - Michaux, F. A1 - Mattern, P. A1 - Kallweit, Stephan T1 - RoboPIV: how robotics enable PIV on a large industrial scale JF - Measurement Science and Technology N2 - This work demonstrates how the interaction between particle image velocimetry (PIV) and robotics can massively increase measurement efficiency. The interdisciplinary approach is shown using the complex example of an automated, large scale, industrial environment: a typical automotive wind tunnel application. Both the high degree of flexibility in choosing the measurement region and the complete automation of stereo PIV measurements are presented. The setup consists of a combination of three robots, individually used as a 6D traversing unit for the laser illumination system as well as for each of the two cameras. Synchronised movements in the same reference frame are realised through a master-slave setup with a single interface to the user. By integrating the interface into the standard wind tunnel management system, a single measurement plane or a predefined sequence of several planes can be requested through a single trigger event, providing the resulting vector fields within minutes. In this paper, a brief overview on the demands of large scale industrial PIV and the existing solutions is given. Afterwards, the concept of RoboPIV is introduced as a new approach. In a first step, the usability of a selection of commercially available robot arms is analysed. The challenges of pose uncertainty and importance of absolute accuracy are demonstrated through comparative measurements, explaining the individual pros and cons of the analysed systems. Subsequently, the advantage of integrating RoboPIV directly into the existing wind tunnel management system is shown on basis of a typical measurement sequence. In a final step, a practical measurement procedure, including post-processing, is given by using real data and results. Ultimately, the benefits of high automation are demonstrated, leading to a drastic reduction in necessary measurement time compared to non-automated systems, thus massively increasing the efficiency of PIV measurements. Y1 - 2018 U6 - https://doi.org/10.1088/1361-6501/aab5c1 SN - 1361-6501 N1 - Special Section on the 12th International Symposium on Particle Image Velocimetry (PIV 2017) VL - 29 IS - 7 SP - 074009 PB - IOP CY - Bristol ER - TY - CHAP A1 - Starke, Günther T1 - Robotertechnik für individuelle Automatisierungslösungen und unterschiedlichste Prozessanwendungen : 17. Internationale Fachmesse „Schweißen & Schneiden 2009“ – Stand und Entwicklungstendenzen T2 - Schweissen und Schneiden Y1 - 2009 SN - 0036-7184 (Print) SP - N 13 (nach Seite 716) PB - DVS - Deutscher Verband für Schweißen und Verwandte Verfahren e.V. ER - TY - JOUR A1 - Starke, Günther A1 - Ahlbehrendt, Norbert A1 - Bischoff, Rainer A1 - Melzer, Harald A1 - Sieber, Sven A1 - Senk, Burkhard A1 - Kramarczyk, Peter T1 - RoboTOOL. Technologien für den ortsflexiblen Einsatz von Robotern bei temporären Arbeitsaufgaben in der Fertigung JF - wt Werkstattstechnik online Y1 - 2009 SN - 1436-4980 VL - Bd. 99 IS - H. 9 SP - 661 EP - 670 ER - TY - CHAP A1 - Kallweit, Stephan A1 - Gottschalk, Michael A1 - Walenta, Robert T1 - ROS based safety concept for collaborative robots in industrial applications T2 - Advances in robot design and intelligent control : proceedings of the 24th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD). (Advances in intelligent systems and computing ; 371) N2 - The production and assembly of customized products increases the demand for flexible automation systems. One approach is to remove the safety fences that separate human and industrial robot to combine their skills. This collaboration possesses a certain risk for the human co-worker, leading to numerous safety concepts to protect him. The human needs to be monitored and tracked by a safety system using different sensors. The proposed system consists of a RGBD camera for surveillance of the common working area, an array of optical distance sensors to compensate shadowing effects of the RGBD camera and a laser range finder to detect the co-worker when approaching the work cell. The software for collision detection, path planning, robot control and predicting the behaviour of the co-worker is based on the Robot Operating System (ROS). A first prototype of the work cell shows that with advanced algorithms from the field of mobile robotics a very flexible safety concept can be realized: the robot not simply stops its movement when detecting a collision, but plans and executes an alternative path around the obstacle. KW - Collaborative robot KW - Human-Robot interaction KW - Safety concept KW - Workspace monitoring KW - Path planning Y1 - 2016 SN - 978-3-319-21289-0 (Print) ; 978-3-319-21290-6 (E-Book) U6 - https://doi.org/10.1007/978-3-319-21290-6_3 SP - 27 EP - 35 PB - Springer CY - Cham ER - TY - JOUR A1 - Babilon, Katharina A1 - Wilbring, Daniela A1 - Tappert, Tim A1 - Pfaff, Raphael A1 - Enning, Manfred T1 - Schienenfahrzeugtechnik hands on – FH Aachen IMechE Railway Challenge JF - Ingenieurspiegel Y1 - 2018 SN - 1868-5919 IS - 2 SP - 20 EP - 22 PB - Public Verlag CY - Bingen ER - TY - JOUR A1 - Wollert, Jörg T1 - Schlaue Produktion von smarten Autos : hinter der Smart-Produktion steckt ein innovatives Logistikkonzept JF - Technica Y1 - 1999 SN - 0040-866X VL - Bd. 48 IS - H. 4 SP - 20 EP - 23 ER - TY - JOUR A1 - Gebhardt, Andreas T1 - Schnell und flexibel zur Kleinserie. Effizienzsteigerung bei der Realisierung von Komponenten und Teilsystemen JF - Ingenieur-Werkstoffe. 8 (1999), H. 3 Y1 - 1999 SN - 0935-5715 SP - 8 EP - 14 ER -