TY - JOUR A1 - Richter, L. A1 - Wichern, M. A1 - Grömping, Markus A1 - Robecke, U. A1 - Haberkamp, J. T1 - Ammonium recovery from process water of digested sludge dewatering by membrane contactors JF - Water Practice and Technology N2 - Membrane contactors are a promising alternative for nitrogen removal and recovery from process water compared to other physicochemical and biological sidestream treatment processes. Münster wastewater treatment plant (WWTP) is the first municipal WWTP in Germany operating a full-scale membrane contactor system to improve the nitrogen elimination and recovery efficiency. Factors influencing the operation and membrane performance are investigated in an accompanying research project. Additional operational aspects of the applied membrane modules are investigated in detail using a bench-scale membrane contactor. First results of the full-scale application demonstrate a high nitrogen removal efficiency of >95%. Y1 - 2020 U6 - https://doi.org/10.2166/wpt.2020.002 SN - 1751-231X VL - 15 IS - 1 SP - 84 EP - 91 PB - IWA Publishing CY - London ER - TY - BOOK A1 - Rick, Heino T1 - Insolvenzrechtliche und steuerliche Ansätze zur Lösung des Finanzierungsproblems in einem insolvenzrechtlichen Reorganisationsverfahren Y1 - 1985 N1 - Europäische Hochschulschriften : Reihe 5, Volks- und Betriebswirtschaft ; 612; Zugl.: Aachen, Techn. Hochsch., Diss., 1984 PB - Lang CY - Frankfurt am Main [u.a.] ER - TY - BOOK A1 - Rick, Heino T1 - Steuerreform 1990 : alle Änderungen u. Auswirkungen für Unternehmen u. Selbständige ; Änderungen u. Auswirkungen nach Problem- u. Sachbereichen ; Gesetzestext ; Was ist neu? ; Auswirkungen u. Beisp., Modellabrechnungen Y1 - 1989 PB - WEKA-Fachverl., Fachverl. für Geschäftsführung u. Management CY - Kissing [u.a.] ER - TY - JOUR A1 - Rick, Heino T1 - Insolvenzrechtsreform und Sanierungsrücklage nach § 6d EStG. Teil 1 JF - Der Betrieb. 38 (1985), H. 44 Y1 - 1985 SP - 2257 EP - 2261 ER - TY - JOUR A1 - Rick, Heino T1 - Insolvenzrechtsreform und Sanierungsrücklage nach § 6d EStG. Teil 2 JF - Der Betrieb. 38 (1985), H. 45 Y1 - 1985 SP - 2309 EP - 2312 ER - TY - JOUR A1 - Rick, Heino T1 - Neuregelungen zum häuslichen Arbeitszimmer JF - DN-Woche (1995) Y1 - 1995 N1 - Ausgabe 29.11.1995 ER - TY - JOUR A1 - Rick, Heino T1 - Erben und Steuerbelastung JF - DN-Woche (1995) Y1 - 1995 N1 - Ausgabe 13.12.1995 ER - TY - JOUR A1 - Rick, Heino T1 - Privatnutzung von Firmenfahrzeugen JF - DN-Woche (1996) Y1 - 1996 N1 - Ausgabe 28.02.1996 ER - TY - JOUR A1 - Rick, Heino T1 - Steuerliche Aspekte zum Vertragsarztrechtsänderungsgesetz (VÄndG) 2007 JF - BVGD-Info : Mitteilungen des Bundesverbandes Gastroenterologie Deutschland. 2 (2007), H. 4 Y1 - 2007 SP - 91 EP - 92 ER - TY - BOOK A1 - Rick, Heino A1 - Rautenberg, Hans Günter T1 - Die Prüfung zum vereidigten Buchprüfer in 1000 [tausend] Fragen und Antworten / hrsg. von Gustav Wrenger . Bd. 2 : Betriebswirtschaftslehre / von Hans Günter Rautenberg ; Heino Rick Y1 - 1987 SN - 3-88606-115-9 PB - Deubner CY - Köln ER - TY - JOUR A1 - Rick, Heino A1 - Rautenberg, Hans Günter T1 - Grundlagen der Bilanztheorie und Unternehmenserhaltungskonzeptionen JF - Das Examen zum vereidigten Buchprüfer und Wirtschaftsprüfer : d. neuen Zusatzqualifikationen d. Steuerberaters u. Rechtsanwaltes nach d. Bilanzrichtlinien-Gesetz / hrsg. von Klaus-Jürgen Lehwald u. Helmut Bausch unter Mitarb. von Peter Meier ... Y1 - 1986 N1 - Kapitel 7/4.1. PB - WEKA-Verlag, Verlag für Steuerfachliteratur CY - Kissing [u.a.] ER - TY - JOUR A1 - Rick, Heino A1 - Rautenberg, Hans Günter T1 - Grundzüge der Unternehmensbewertung JF - Das Examen zum vereidigten Buchprüfer und Wirtschaftsprüfer : d. neuen Zusatzqualifikationen d. Steuerberaters u. Rechtsanwaltes nach d. Bilanzrichtlinien-Gesetz / hrsg. von Klaus-Jürgen Lehwald u. Helmut Bausch unter Mitarb. von Peter Meier ... Y1 - 1986 N1 - Kapitel 7/4.6. PB - WEKA-Verlag, Verlag für Steuerfachliteratur CY - Kissing [u.a.] ER - TY - JOUR A1 - Rick, Heino A1 - Rautenberg, Hans Günter T1 - Beurteilung und Analyse von Jahresabschlüssen JF - Das Examen zum vereidigten Buchprüfer und Wirtschaftsprüfer : d. neuen Zusatzqualifikationen d. Steuerberaters u. Rechtsanwaltes nach d. Bilanzrichtlinien-Gesetz / hrsg. von Klaus-Jürgen Lehwald u. Helmut Bausch unter Mitarb. von Peter Meier ... Y1 - 1986 SN - 3-8111-2600-8 N1 - Kapitel 7/2.5. PB - WEKA-Verlag, Verlag für Steuerfachliteratur CY - Kissing [u.a.] ER - TY - CHAP A1 - Ricker, Marcus A1 - Ulke, Bernd ED - Krause, Thomas ED - Ulke, Bernd ED - Ferger, Martin T1 - Baustoffe T2 - Zahlentafeln für den Baubetrieb N2 - In diesem Kapitel werden die Eigenschaften der Baustoffe Bitumen, Beton und Mauerwerk insbesondere unter dem Aspekt der Anwendung im Baustellenbetrieb dargestellt. Y1 - 2024 SN - 978-3-658-41329-3 (Print) SN - 978-3-658-41330-9 (eBook) U6 - https://doi.org/10.1007/978-3-658-41330-9_2 SP - 61 EP - 148 PB - Springer Vieweg CY - Wiesbaden ER - TY - JOUR A1 - Riedel, Marc A1 - Kartchemnik, Julia A1 - Schöning, Michael Josef A1 - Lisdat, Fred T1 - Impedimetric DNA detection – steps forward to sensorial application JF - Analytical chemistry N2 - This study describes a label-free impedimetric sensor based on short ssDNA recognition elements for the detection of hybridization events. We concentrate on the elucidation of the influence of target length and recognition sequence position on the sensorial performance. The impedimetric measurements are performed in the presence of the redox system ferri-/ferrocyanide and show an increase in charge transfer resistance upon hybridization of ssDNA to the sensor surface. Investigations on the impedimetric signal stability demonstrate a clear influence of the buffers used during the sensor preparation and the choice of the passivating mercaptoalcanol compound. A stable sensor system has been developed, enabling a reproducible detection of 25mer target DNA in the low nanomolar range. After hybridization, a sensor regeneration can be reached with deionized water by adjustment of effective convection conditions, ensuring a sensor reusability. By investigations of longer targets with overhangs exposed to the solution, we can demonstrate applicability of the impedimetric detection for longer ssDNA. However, a decreasing charge transfer resistance change (ΔRct) is found by extending the overhang. As a strategy to increase the impedance change for longer target strands, the position of the recognition sequence can be designed in a way that a small overhang is exposed to the electrode surface. This is found to result in an increase in the relative Rct change. These results suggest that DNA and consequently negative charge near the electrode possess a larger impact on the impedimetric signal than DNA further away. Y1 - 2014 U6 - https://doi.org/10.1021/ac501800q SN - 1520-6882 (E-Journal); 0003-2700 (Print); 0096-4484 (Print) VL - 86 (2014) IS - 15 SP - 7867 EP - 7874 PB - ACS Publications CY - Columbus ER - TY - THES A1 - Riederer, Estella Charlotte T1 - ITFS : Redesign des Erscheinungsbildes des Internationalen Trickfilm-Festival Stuttgart N2 - Film ab! Das Internationale Trickfilm-Festival Stuttgart ist seit 30 Jahren ein fester Bestandteil der internationalen Film- und Animations-Branche und zählt zu einer der renommiertesten Veranstaltungen. Das Festival ist ein Ort der Inspiration und des Austausches – die neusten Animationsfilme werden hier präsentiert, junge Talente entdeckt und gefördert. Im Fokus des neugestalteten Corporate Design steht die eigens entwickelte Schrift, welche den einzigartigen Charakter des Festivals widerspiegelt und so zum Trickfilm der Typografie wird. Das medienübergreifende Erscheinungsbild, in animierter oder statischer Form, kommuniziert so die qualitativ hochwertigen Inhalte des Festivals. Durch die dynamische und plakative Gestaltung wird das Festival zu einem unvergesslichen Erlebnis für alle Besucher:innen. KW - Redesign KW - Corporate Design KW - ITFS KW - Trickfilm-Festival KW - Stuttgart Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Rieke, Christian A1 - Stollenwerk, Dominik A1 - Dahmen, Markus A1 - Pieper, Martin T1 - Modeling and optimization of a biogas plant for a demand-driven energy supply JF - Energy N2 - Due to the Renewable Energy Act, in Germany it is planned to increase the amount of renewable energy carriers up to 60%. One of the main problems is the fluctuating supply of wind and solar energy. Here biogas plants provide a solution, because a demand-driven supply is possible. Before running such a plant, it is necessary to simulate and optimize the process. This paper provides a new model of a biogas plant, which is as accurate as the standard ADM1 model. The advantage compared to ADM1 is that it is based on only four parameters compared to 28. Applying this model, an optimization was installed, which allows a demand-driven supply by biogas plants. Finally the results are confirmed by several experiments and measurements with a real test plant. Y1 - 2018 U6 - https://doi.org/10.1016/j.energy.2017.12.073 SN - 0360-5442 VL - 145 SP - 657 EP - 664 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Riemer, A. A1 - Schroth, P. A1 - Schütz, S. A1 - Hummel, Hans E. A1 - Lüth, H. A1 - Kohl, C.-D. A1 - Schöning, Michael Josef T1 - The future of fire detection: Biological sensors? – Die Zukunft der Brandgassensorik: Biologische Sensoren? JF - Gassensorik in der Brandmeldetechnik : [VdS-Fachtagung, am 15. und 16. November 2000 in Köln] = Gas sensors for fire detection / VdS Schadenverhütung Y1 - 2000 N1 - Fachtagung Gassensorik in der Brandmeldetechnik ; (2000, Köln) SP - 1 EP - 7 PB - VdS Schadenverhütung CY - Köln ER - TY - JOUR A1 - Rieper, Harald A1 - Gebhardt, Andreas A1 - Stucker, Brent T1 - Selective Laser Melting of the Eutectic Silver-Copper Alloy Ag 28 wt % Cu JF - RTejournal - Forum für Rapid Technologie N2 - The aim of this work was to perform a detailed investigation of the use of Selective Laser Melting (SLM) technology to process eutectic silver-copper alloy Ag 28 wt. % Cu (also called AgCu28). The processing occurred with a Realizer SLM 50 desktop machine. The powder analysis (SEM-topography, EDX, particle distribution) was reported as well as the absorption rates for the near-infrared (NIR) spectrum. Microscope imaging showed the surface topography of the manufactured parts. Furthermore, microsections were conducted for the analysis of porosity. The Design of Experiments approach used the response surface method in order to model the statistical relationship between laser power, spot distance and pulse time. KW - SLM KW - Response Surface Method KW - Porositat KW - Eutectic Silver Copper alloy KW - Additive Manufacturing Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?nbn:de:0009-2-44141 SN - 1614-0923 VL - 13 ER - TY - CHAP A1 - Rieper, Harald A1 - Gebhardt, Andreas A1 - Stucker, Brent T1 - Process parameters for Selective Laser Melting of AgCu7 T2 - DDMC, Fraunhofer Direct Digital Manufacturing Conference, 3 Y1 - 2016 SN - 978-3-8396-1001-5 N1 - DDMC, 2016, Fraunhofer Direct Digital Manufacturing Conference, 3rd, Berlin, DE, 2016-03-16 - 2016-03-17 SP - 171 EP - 176 PB - Fraunhofer-Verlag CY - Stuttgart ER -