TY  - JOUR
A1  - Roth, Jasmine
A1  - Tippkötter, Nils
T1  - Evaluation of lignocellulosic material for butanol production using enzymatic hydrolysate medium
JF  - Cellulose Chemistry and Technology
N2  - Butanol is a promising gasoline additive and platform chemical that can be readily produced via acetone-butanolethanol (ABE) fermentation from pretreated lignocellulosic materials. This article examines lignocellulosic material from beech wood for ABE fermentation, using Clostridium acetobutylicum. First, the utilization of both C₅₋ (xylose) and C₆₋ (glucose) sugars as sole carbon source was investigated in static cultivation, using serum bottles and synthetic medium. The utilization of pentose sugar resulted in a solvent yield of 0.231 g·g_sugar⁻¹, compared to 0.262 g·g_sugar⁻¹ using hexose. Then, the Organosolv pretreated crude cellulose fibers (CF) were enzymatically decomposed, and the resulting hydrolysate medium was analyzed for inhibiting compounds (furans, organic acids, phenolics) and treated with ionexchangers for detoxification. Batch fermentation in a bioreactor using CF hydrolysate medium resulted in a total solvent yield of 0.20 gABE·g_sugar⁻¹.
Y1  - 2016
VL  - 50
IS  - 3-4
SP  - 405
EP  - 410
PB  - Editura Academiei Romane
CY  - Bukarest
ER  - 
TY  - GEN
A1  - Roth, J.
A1  - Tippkötter, Nils
T1  - New Approach for Enzymatic Hydrolysis of Lignocellulose with Selective Diffusion Separation of the Monosaccharide Products
T2  - Chemie Ingenieur Technik
N2  - Enzymatic hydrolysis of lignocellulosic material plays an important role in the classical biorefinery approach. Apart from the pretreatment of the raw material, hydrolysis is the basis for the conversion of the cellulose and hemicellulose fraction into fermentable sugars. After hydrolysis, usually a solid-liquid separation takes place, in order to separate the residual plant material from the sugar-rich fraction, which can be subsequently used in a fermentation step. In order to factor out the separation step, the usage of in alginate immobilized crude cellulose fiber beads (CFBs) were evaluated. Pretreated cellulose fibers are incorporated in an alginate matrix together with the relevant enzymes. In doing so, sugars diffuse trough the alginate matrix, allowing a simplified delivery into the surrounding fluid. This again reduces product inhibition of the glucose on the enzyme catalysts. By means of standardized bead production the hydrolysis in lab scale was possible. First results show that liberation of glucose and xylose is possible, allowing a maximum total sugar yield of 75 %.
Y1  - 2016
U6  - https://doi.org/10.1002/cite.201650301
SN  - 0009-286X
SN  - 1522-2640 (eISSN)
N1  - ProcessNet-Jahrestagung 2016 und 32. DECHEMA-Jahrestagung der Biotechnologen 2016, 12. - 15. September 2016, Eurogress Aachen
VL  - 88
IS  - 9
SP  - 1237
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Roth, J.
A1  - Möhring, S.
A1  - Tippkötter, Nils
T1  - Characterization and evaluation of lignocellulosic biomass 130 hydrolysates for ABE fermentation
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 130
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - JOUR
A1  - Pinkenburg, Olaf
A1  - Schiffels, Johannes
A1  - Selmer, Thorsten
T1  - Das CoLibry-Konzept – ein Werkzeugkasten für die Synthetische Biologie: Bioproduktion
JF  - BIOspektrum
N2  - Regardless of size or destination, synthetic biology starts with com-parably small information units, which need to be combined and properly arranged in order to achieve a certain goal. This may be the de novo synthesis of individual genes from oligonucleotides, a shuffling of protein domains in order to create novel biocatalysts, the assembly of multiple enzyme encoding genes in metabolic pathway design, or strain development at the production stage. The CoLibry concept has been designed in order to close the gap between recombinant production of individual genes and genome editing.
Y1  - 2016
U6  - https://doi.org/10.1007/s12268-016-0734-8
VL  - 22
IS  - 6
SP  - 593
EP  - 595
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Paulßen, Elisabeth
A1  - Lengkeek, Nigel A.
A1  - Le, Van So
A1  - Pellegrini, Paul A.
A1  - Greguric, Ivan
A1  - Weiner, Ron
T1  - The role of additives in moderating the influence of Fe(III) and Cu(II) on the radiochemical yield of [⁶⁸Ga(DOTATATE)]
JF  - Applied Radiation and Isotopes
N2  - [⁶⁸Ga(DOTATATE)] has demonstrated its clinical usefulness. Both Fe³⁺ and Cu²⁺, potential contaminants in Gallium-68 generator eluent, substantially reduce the radiochemical (RC) yield of [⁶⁸Ga(DOTATATE)] if the metal/ligand ratio of 1:1 is exceeded. A variety of compounds were examined for their potential ability to reduce this effect. Most had no effect on RC yield. However, addition of phosphate diminished the influence of Fe³⁺ by likely forming an insoluble iron salt. Addition of ascorbic acid reduced Cu²⁺ and Fe³⁺ to Cu⁺ and Fe²⁺ respectively, both of which have limited impact on RC yields. At low ligand amounts (5 nmol DOTATATE), the addition of 30 nmol phosphate (0.19 mM) increased the tolerance of Fe3⁺ from 4 nmol to 10 nmol (0.06 mM), while the addition of ascorbic acid allowed high RC yields (>95%) in the presence of 40 nmol Fe³⁺ (0.25 mM) and 100 nmol Cu²⁺ (0.63 mM). The effect of ascorbic acid was highly pH-dependant, and gave optimal results at pH 3.
Y1  - 2016
U6  - https://doi.org/10.1016/j.apradiso.2015.09.008
SN  - 1872-9800
VL  - 107
SP  - 13
EP  - 16
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Niedermeyer, Angela
A1  - Zhou, Bei
A1  - Dursun, Gözde
A1  - Temiz Artmann, Aysegül
A1  - Markert, Bernd
T1  - An examination of tissue engineered scaffolds in a bioreactor
JF  - Proceedings in Applied Mathematics and Mechanics PAMM
N2  - Replacement tissues, designed to fill in articular cartilage defects, should exhibit the same properties as the native material. The aim of this study is to foster the understanding of, firstly, the mechanical behavior of the material itself and, secondly, the influence of cultivation parameters on cell seeded implants as well as on cell migration into acellular implants. In this study, acellular cartilage replacement material is theoretically, numerically and experimentally investigated regarding its viscoelastic properties, where a phenomenological model for practical applications is developed. Furthermore, remodeling and cell migration are investigated.
Y1  - 2016
U6  - https://doi.org/10.1002/pamm.201610038
SN  - 1617-7061
N1  - Joint Annual Meeting of DMV and GAMM 2016, 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker-Vereinigung (DMV), Braunschweig, DE, Mar 7-11, 2016
VL  - 16
IS  - 1
SP  - 99
EP  - 100
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Möhring, S.
A1  - Wulfhorst, H.
A1  - Roth, J.
A1  - Tippkötter, Nils
T1  - Pretreatment strategies for lignocellulosic biomass
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 131
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - GEN
A1  - Möhring, S.
A1  - Wulfhorst, H.
A1  - Capitain, C.
A1  - Roth, J.
A1  - Tippkötter, Nils
T1  - Fractioning of lignocellulosic biomass: Scale-down and automation of thermal pretreatment for parameter optimization
T2  - Chemie Ingenieur Technik
N2  - In order to efficiently convert lignocellulose, it is often necessary to conduct a pretreatment. The biomass considered in this study typically comprises of agricultural and horticultural residues, as well as beechwood. A very environmentally friendly method, namely, fungal pretreatment using white-rot fungi, leads to an enhanced enzymatic hydrolysis. In contrast to other processes presented, the energy input is extremely low. However, the fungal growth on the lignocellulosic substrates takes several weeks at least in order to be effective. Thus, the reduction of chemicals and energy for thermal processing is a target of our current research. Liquid hot water (LHW) and solvent-based pretreatment (OrganoSolv) require more complex equipment, as they depend on high temperatures (160 – 180 °C) and enhanced pressure (up to 20 bar). However, they prove to be promising processes in regard to the fractioning of lignocellulose. For optimal lignin recovery the parameters differ from those established in cellulose extraction. A novel screening system scaled down to a reaction volume of 100 mL has been developed and successfully tested for this purpose.
Y1  - 2016
U6  - https://doi.org/10.1002/cite.201650288
SN  - 0009-286X
SN  - 1522-2640 (eISSN)
N1  - ProcessNet-Jahrestagung und 32. DECHEMA-Jahrestagung der Biotechnologen 2016, 12. - 15. September 2016, Eurogress Aachen
VL  - 88
IS  - 9
SP  - 1229
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Sorich, Maren
A1  - Bartz, Alexander
A1  - Siegert, Petra
A1  - Willenberg, Holger S.
A1  - Lisdat, Fred
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Towards an adrenaline biosensor based on substrate recycling amplification in combination with an enzyme logic gate
JF  - Sensors and Actuators B: Chemical
N2  - An amperometric biosensor using a substrate recycling principle was realized for the detection of low adrenaline concentrations (1 nM) by measurements in phosphate buffer and Ringer’s solution at pH 6.5 and pH 7.4, respectively. In proof-of-concept experiments, a Boolean logic-gate principle has been applied to develop a digital adrenaline biosensor based on an enzyme AND logic gate. The obtained results demonstrate that the developed digital biosensor is capable for a rapid qualitative determination of the presence/absence of adrenaline in a YES/NO statement. Such digital biosensor could be used in clinical diagnostics for the control of a correct insertion of a catheter in the adrenal veins during adrenal venous-sampling procedure.
Y1  - 2016
U6  - https://doi.org/10.1016/j.snb.2016.06.064
SN  - 0925-4005
VL  - 237
SP  - 190
EP  - 195
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - BOOK
A1  - Lauth, Jakob
A1  - Kowalczyk, Jürgen
T1  - Einführung in die Physik und Chemie der Grenzflächen und Kolloide
Y1  - 2016
SN  - 978-3-662-47018-3
U6  - https://doi.org/10.1007/978-3-662-47018-3
PB  - Springer
CY  - Berlin
ER  - 
TY  - BOOK
A1  - Lauth, Jakob
T1  - Physikalische Chemie, 5: Elektrochemie
Y1  - 2016
SN  - 978-3-662-47559-1
PB  - Springer
CY  - Berlin
ER  - 
TY  - BOOK
A1  - Lauth, Jakob
T1  - Physikalische Chemie, 4: Reaktionskinetik
Y1  - 2016
SN  - 978-3-662-47674-1
PB  - Springer
CY  - Berlin
ER  - 
TY  - BOOK
A1  - Lauth, Jakob
T1  - Physikalische Chemie, 3: Phasengleichgewichte
Y1  - 2016
SN  - 978-3-662-47571-3
PB  - Springer
CY  - Berlin
ER  - 
TY  - BOOK
A1  - Lauth, Jakob
T1  - Physikalische Chemie, 2: Chemische Thermodynamik
Y1  - 2016
SN  - 978-3-662-47621-5
PB  - Springer
CY  - Berlin
ER  - 
TY  - BOOK
A1  - Lauth, Jakob
T1  - Physikalische Chemie, 1: Grundlagen der Thermodynamik und Verhalten der Gase
Y1  - 2016
SN  - 978-3-662-47676-5
PB  - Springer
CY  - Berlin
ER  - 
TY  - GEN
A1  - Kuthan, K.
A1  - Al-Kaidy, H.
A1  - Tippkötter, Nils
T1  - Tropfenbasierte Enzymreaktionen auf Glasoberflächen im μL-Maßstab mit ortsaufgelöster pL-Dosierung der Reaktanden
T2  - Chemie Ingenieur Technik
N2  - Mit der Entwicklung wässriger Tropfen, die mit einer schützenden Hülle magnetisierbarer, hydrophober Partikel umgeben sind, ergeben sich neue Möglichkeiten im Bereich der Mikrofluidik. So können die Tropfen als flüssige Mikroreaktoren eingesetzt werden. Der wässrige Kern dieser Mikroreaktoren besteht aus einer Substratlösung für enzymatische Umsetzungen. Durch Bewegen der Mikroreaktoren können diese über immobilisierten Enzymen positioniert werden, um so einen enzymatischen Umsatz innerhalb der Mikroreaktoren zu realisieren. Hierfür wurde eine neue Mikroreaktorplattform-Technologie etabliert. Die Mikroreaktoren können aufgrund ihrer magnetisierbaren Hüllenpartikel über elektromagnetische Spulen bewegt werden. Die Bewegung erfolgt dabei mit einer automatisierten Aktuatorplattform, bestehend aus einer 3x3 Doppelspulenmatrix mit Magnetkernen. Als modellhaftes Reaktionssystem wird eine Enzymkaskade eingesetzt, die sich aus einer b-Glucosidase, Glucose-Oxidase und Meerrettichperoxidase zusammensetzt. Primär untersuchte Substrate sind Fluorescein-di-b-D-glucopyranoside, und 1-(3,7-Dihydroxy-10H-phenoxazin-10-yl)-ethanon, bei deren Umsatz fluoreszierende Produkte entstehen.
Y1  - 2016
U6  - https://doi.org/10.1002/cite.201650117
N1  - ProcessNet-Jahrestagung 2016 und 32. DECHEMA-Jahrestagung der Biotechnologen 2016, 12. - 15. September 2016, Eurogress Aachen
VL  - 88
IS  - 9
SP  - 1336
EP  - 1337
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Kasper, Katharina
A1  - Schiffels, Johannes
A1  - Krafft, Simone
A1  - Kuperjans, Isabel
A1  - Elbers, Gereon
A1  - Selmer, Thorsten
T1  - Biogas Production on Demand Regulated by Butyric Acid Addition
T2  - IOP Conference Series: Earth and Environmental Science. Bd. 32
Y1  - 2016
U6  - https://doi.org/10.1088/1755-1315/32/1/012009
SN  - 1755-1315
N1  - ICARET 2016, International Conference on Advances in Renewable Energy and Technologies, Putrajaya, MY, Feb 23-25, 2016
VL  - 32
SP  - 012009/1
EP  - 012009/4
ER  - 
TY  - JOUR
A1  - Infantino, Angelo
A1  - Paulßen, Elisabeth
A1  - Mostacci, Domiziano
A1  - Schaffer, Paul
A1  - Trinczek, Michael
A1  - Hoehr, Cornelia
T1  - Assessment of the production of medical isotopes using the Monte Carlo code FLUKA: Simulations against experimental measurements
JF  - Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms
N2  - The Monte Carlo code FLUKA is used to simulate the production of a number of positron emitting radionuclides, ¹⁸F, ¹³N, ⁹⁴Tc, ⁴⁴Sc, ⁶⁸Ga, ⁸⁶Y, ⁸⁹Zr, ⁵²Mn, ⁶¹Cu and ⁵⁵Co, on a small medical cyclotron with a proton beam energy of 13 MeV. Experimental data collected at the TR13 cyclotron at TRIUMF agree within a factor of 0.6 ± 0.4 with the directly simulated data, except for the production of ⁵⁵Co, where the simulation underestimates the experiment by a factor of 3.4 ± 0.4. The experimental data also agree within a factor of 0.8 ± 0.6 with the convolution of simulated proton fluence and cross sections from literature. Overall, this confirms the applicability of FLUKA to simulate radionuclide production at 13 MeV proton beam energy.
Y1  - 2016
U6  - https://doi.org/10.1016/j.nimb.2015.10.067
SN  - 1872-9584
VL  - 366
SP  - 117
EP  - 123
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Hering, T.
A1  - Ulber, Roland
A1  - Tippkötter, Nils
T1  - Development of a screening system for antimicrobial surfaces
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 129
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - GEN
A1  - Hering, T.
A1  - Ulber, Roland
A1  - Tippkötter, Nils
T1  - Antimikrobielle Oberflächenmodifikation durch Mikropartikel
T2  - Chemie Ingenieur Technik
N2  - Die Ausbildung von Biofilmen in technischen Anlagen, wie z. B. Kühlkreisläufen, Wasseraufbereitungssystemen und Bioreaktoren, führen zu Materialschäden (Biofouling) und stark erhöhtem Energieaufwand. Im Rahmen der aktuellen Forschungsarbeiten erfolgen aktive sowie passive Bio-Modifikationen auf funktionalisierten magnetischen Mikropartikelober-flächen. Um die verschiedenen funktionalisierten magnetischen Mikropartikel zu analysieren und ihre antimikrobielle Wirkung zu testen, wird der Einsatz einer 3D-gedruckten, magnetischen Plattform für ein Fluoreszenz-basiertes Screening-System untersucht. Für den Oberflächenschutz wurden verschiedene, antimikrobiell funktionalisierte Partikelkombinationen mit dem Mikroorganismus Escherichia coli GFPmut2 in Bezug auf aktiven Oberflächenschutz verglichen. Um die antimikrobielle Oberflächeneffekte von synergistischen Kombinationen unterschiedlich funktionalisierter Partikel zu bestimmen, werden Oberflächen einem Magnetfeld ausgesetzt, das die Mikropartikel als definierte Schicht auf ihnen zurück hält. Diese modifizierten Oberflächen können sowohl durch Fluoreszenzspektroskopie als auch -mikroskopie analysiert werden.
Y1  - 2016
U6  - https://doi.org/10.1002/cite.201650084
N1  - ProcessNet-Jahrestagung 2016 und 32. DECHEMA-Jahrestagung der Biotechnologen 2016, 12. - 15. September 2016, Eurogress Aachen
VL  - 88
IS  - 9
SP  - 1302
PB  - Wiley-VCH
CY  - Weinheim
ER  -