TY  - CHAP
A1  - Pasligh, N.
A1  - Funke, D.
A1  - Röth, Thilo
A1  - Krack, R.
T1  - Leichtbau Quertrager als Stahlblech-Aluminiumdruckguss-Hybrid - Von der numerischen Berechnung bis zum realen Prototypen
T2  - VDI BERICHTE
Y1  - 2010
SN  - 978-3-18-092107-5
N1  - 15. Kongress SIMVEC Berechnung und Simulation im Fahrzeugbau, 
Baden-Baden, 16. und 17. November 2010
PB  - VDI Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Lao, B.
A1  - Bührig-Polaczek, A.
A1  - Röth, Thilo
ED  - Wielage, Bernhard
T1  - Funktionsintegrierte Leichtbaustrukturen in gussintensiver Metall-Hybridbauweise
T2  - Verbundwerkstoffe und Werkstoffverbunde: Tagungsband zum 18. Symposium ; 30.03.2011 bis 01.04.2011, Chemnitz
Y1  - 2011
SN  - 978-3-00-033801-4
N1  - Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen ; 41
SP  - 413
EP  - 421
PB  - Eigenverlag
CY  - Chemnitz
ER  - 
TY  - JOUR
A1  - Weihe, Stefan
A1  - Ansgar, Ernst
A1  - Röth, Thilo
A1  - Proksch, Johannes
T1  - Leichtmetall-Stahl-Verbundguss im Nutzfahrzeugbau
JF  - Lightweight Design
N2  - In modernen Fahrzeugkarosserien der Großserie kommen zunehmend Materialmischbauweisen
zur Anwendung. In Zusammenarbeit der Daimler AG, der Tower Automotive Holding
GmbH, der Imperia GmbH sowie der Partnerunternehmen KSM Castings GmbH und Schaufler
Tooling GmbH & Co. KG wird das Leichtbaupotenzial von Stahlblech-AluminiumverbundgussHybriden
am Beispiel des vorderen Dachquerträgers des Mercedes-Benz Viano/Vito ausführlich
untersucht.
Y1  - 2013
SN  - 2192-8738 (Online)
SN  - 1865-4819 (Print)
VL  - 6
IS  - 2
SP  - 38
EP  - 43
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Hendrick, P.
T1  - Experimental Evaluation of the Pollutant and Noise Emissions of the GTCP 36-300 Gas Turbine Operated with Kerosene and a Low NOX Micromix Hydrogen Combustor
T2  - 7th European Conference for Aeronautics and Space Sciences, EUCASS 2017
Y1  - 2017
U6  - http://dx.doi.org/10.13009/EUCASS2017-125
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Development and Testing of a Low NOX Micromix Combustion Chamber for an Industrial Gas Turbine
JF  - International Journal of Gas Turbine, Propulsion and Power Systems
N2  - The Micromix combustion principle, based on cross-flow mixing of air and hydrogen, promises low emission applications in future gas turbines. The Micromix combustion takes place in several hundreds of miniaturized diffusion-type micro-flames. The major advantage is the inherent safety against flash-back and low NOx-emissions due to a very short residence time of reactants in the flame region. The paper gives insight into the Micromix design and scaling procedure for different energy densities and the interaction of scaling laws and key design drivers in gas turbine integration. Numerical studies, experimental testing, gas turbine integration and interface considerations are evaluated. The aerodynamic stabilization of the miniaturized flamelets and the resulting flow field, flame structure and NOx formation are analysed experimentally and numerically. The results show and confirm the successful adaption of the low NOx Micromix characteristics for a range of different nozzle sizes, energy densities and thermal power output.
Y1  - 2017
U6  - http://dx.doi.org/10.38036/jgpp.9.1_27
SN  - 1882-5079
VL  - 9
IS  - 1
SP  - 27
EP  - 36
ER  - 
TY  - CHAP
A1  - Blome, Hans-Joachim
T1  - Über die kulturelle Bedeutung der Raumfahrt
T2  - Überleben im Weltraum. Auf dem Weg zu neuen Grenzen. 21. Berliner Kolloquium der Daimler und Benz Stiftung 24. Mai 2017
Y1  - 2018
SP  - 5
EP  - 5
ER  - 
TY  - CHAP
A1  - Czupalla, Markus
T1  - Pflanzen oder Maschinen - was läßt uns auf dem Mars überleben?
T2  - Überleben im Weltraum. Auf dem Weg zu neuen Grenzen. 21. Berliner Kolloquium der Daimler und Benz Stiftung 24. Mai 2017
Y1  - 2017
SP  - 12
EP  - 12
ER  - 
TY  - CHAP
A1  - Blome, Hans-Joachim
A1  - Gerzer, Rupert
A1  - Baumstark-Khan, Christa
A1  - Ewald, Reinhold
A1  - Heinicke, Christiane
A1  - Czupalla, Markus
A1  - Carter, Layne
A1  - Anderson, Molly
T1  - Überleben im Weltraum. Auf dem Weg zu neuen Grenzen. 21. Berliner Kolloquium der Daimler und Benz Stiftung 24. Mai 2017
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
T1  - Sizing Studies of Light Aircraft with Serial Hybrid Propulsion Systems
T2  - Luft- und Raumfahrt - Digitalisierung und Vernetzung : Deutscher Luft- und Raumfahrtkongress 2018. 4. - 6. September 2018 - Friedrichshafen
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
T1  - Initial Sizing for a Family of Hybrid-Electric VTOL General Aviation Aircraft
T2  - 67. Deutscher Luft- und Raumfahrtkongress 2018
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
T1  - Sizing Studies of Light Aircraft with Parallel Hybrid Propulsion Systems
T2  - Deutscher Luft- und Raumfahrtkongress 2018
Y1  - 2018
U6  - http://dx.doi.org/10.25967/480227
ER  - 
TY  - JOUR
A1  - Götten, Falk
A1  - Finger, Felix
A1  - Havermann, Marc
A1  - Braun, Carsten
A1  - Gomez, Francisco
A1  - Bill, C.
T1  - On the flight performance impact of landing gear drag reduction methods for unmanned air vehicles
JF  - Deutscher Luft- und Raumfahrtkongress 2018
N2  - The flight performance impact of three different landing gear configurations on a small, fixed-wing UAV is analyzed with a combination of RANS CFD calculations and an incremental flight performance algorithm. A standard fixed landing gear configuration is taken as a baseline, while the influence of retracting the landing gear or applying streamlined fairings is investigated. A retraction leads to a significant parasite drag reduction, while also fairings promise large savings. The increase in lift-to-drag ratio is reduced at high lift coefficients due to the influence of induced drag. All configurations are tested on three different design missions with an incremental flight performance algorithm. A trade-off study is performed using the retracted or faired landing gear's weight increase as a variable. The analysis reveals only small mission performance gains as the aerodynamic improvements are negated by weight penalties. A new workflow for decision-making is presented that allows to estimate if a change in landing gear configuration is beneficial for a small UAV.
Y1  - 2018
U6  - http://dx.doi.org/10.25967/480058
PB  - DGLR
CY  - Bonn
ER  - 
TY  - THES
A1  - Keinz, Jan
T1  - Optimization of a Dry Low NOx Micromix Combustor for an Industrial Gas Turbine Using Hydrogen-Rich Syngas Fuel
Y1  - 2018
N1  - Dissertation submitted for the degree of Doctor of Engineering Sciences and Technology ;
in Cooperation with Aachen university of Applied Sciences, Department Aerospace Technology;
Thesis director: Prof. P. Hendrick;
Thesis co-director: Prof. H. Funke
PB  - Université Libre de Bruxelles - Brussels School of Engineering Aero-Thermo-Mechanics
CY  - Brüssel
ER  - 
TY  - JOUR
A1  - Tekin, Nurettin
A1  - Ashikaga, Mitsugu
A1  - Horikawa, Atsushi
A1  - Funke, Harald
T1  - Enhancement of fuel flexibility of industrial gas turbines by development of innovative hydrogen combustion systems
JF  - Gas for energy
N2  - For fuel flexibility enhancement hydrogen represents a possible alternative gas turbine fuel within future low emission power generation, in case of hydrogen production by the use of renewable energy sources such as wind energy or biomass. Kawasaki Heavy Industries, Ltd. (KHI) has research and development projects for future hydrogen society; production of hydrogen gas, refinement and liquefaction for transportation and storage, and utilization with gas turbine / gas engine for the generation of electricity. In the development of hydrogen gas turbines, a key technology is the stable and low NOx hydrogen combustion, especially Dry Low Emission (DLE) or Dry Low NOx (DLN) hydrogen combustion. Due to the large difference in the physical properties of hydrogen compared to other fuels such as natural gas, well established gas turbine combustion systems cannot be directly applied for DLE hydrogen combustion. Thus, the development of DLE hydrogen combustion technologies is an essential and challenging task for the future of hydrogen fueled gas turbines. The DLE Micro-Mix combustion principle for hydrogen fuel has been in development for many years to significantly reduce NOx emissions. This combustion principle is based on cross-flow mixing of air and gaseous hydrogen which reacts in multiple miniaturized “diffusion-type” flames. The major advantages of this combustion principle are the inherent safety against flashback and the low NOx-emissions due to a very short residence time of the reactants in the flame region of the micro-flames.
Y1  - 2018
IS  - 2
PB  - Vulkan-Verlag
CY  - Essen
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Case studies in initial sizing for hybrid-electric general aviation aircraft
T2  - 2018 AIAA/IEEE Electric Aircraft Technologies Symposium, Cincinnati, Ohio
Y1  - 2018
U6  - http://dx.doi.org/10.2514/6.2018-5005
ER  - 
TY  - BOOK
ED  - Ley, Wilfried
ED  - Hallmann, Willi
ED  - Wittmann, Klaus
T1  - Handbuch der Raumfahrttechnik
Y1  - 2019
SN  - 978-3-446-45429-3
N1  - gedruckt in der Bereichsbibliothek Eupener Str. vorhanden
PB  - Hanser
CY  - München
ET  - 5. Auflage
ER  - 
TY  - JOUR
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of electric propulsion technology and mission requirements on the performance of VTOL UAVs
JF  - CEAS Aeronautical Journal
N2  - One of the engineering challenges in aviation is the design of transitioning vertical take-off and landing (VTOL) aircraft. Thrust-borne flight implies a higher mass fraction of the propulsion system, as well as much increased energy consumption in the take-off and landing phases. This mass increase is typically higher for aircraft with a separate lift propulsion system than for aircraft that use the cruise propulsion system to support a dedicated lift system. However, for a cost–benefit trade study, it is necessary to quantify the impact the VTOL requirement and propulsion configuration has on aircraft mass and size. For this reason, sizing studies are conducted. This paper explores the impact of considering a supplemental electric propulsion system for achieving hovering flight. Key variables in this study, apart from the lift system configuration, are the rotor disk loading and hover flight time, as well as the electrical systems technology level for both batteries and motors. Payload and endurance are typically used as the measures of merit for unmanned aircraft that carry electro-optical sensors, and therefore the analysis focuses on these particular parameters.
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s13272-018-0352-x
SN  - 1869-5582 print
SN  - 1869-5590 online
VL  - 10
IS  - 3
SP  - 843
PB  - Springer
ER  - 
TY  - JOUR
A1  - Finger, Felix
T1  - Vergleichende Leistungs- und Nutzenbewertung von VTOL- und CTOL-UAVs
JF  - Luft- und Raumfahrt : informieren, vernetzen, fördern / Hrsg.: Deutsche Gesellschaft für Luft- und Raumfahrt
Y1  - 2017
SN  - 0173-6264
VL  - 38
IS  - 1
SP  - 44
EP  - 47
ER  - 
TY  - CHAP
A1  - Finger, Felix
T1  - Comparative Performance and Benefit Assessment of VTOL and CTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress (DLRK) 2016, 13.-15.9.2016
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - The Impact of Electric Propulsion on the Performance of VTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress 2017, DLRK , München
Y1  - 2017
ER  -