TY  - JOUR
A1  - Takenaga, Shoko
A1  - Schneider, Benno
A1  - Erbay, E.
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
JF  - Physica status solidi (a)
N2  - A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201532053
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1347
EP  - 1352
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Henken, F. E.
A1  - Oosterhuis, K.
A1  - Öhlschläger, Peter
A1  - Bosch, L.
A1  - Hooijberg, E.
A1  - Haanen, J. B. A. G.
A1  - Steenbergen, R. D. M.
T1  - Preclinical safety evaluation of DNA vaccines encoding modified HPV16 E6 and E7
JF  - Vaccine
N2  - Persistent infection with high-risk human papillomaviruses (hrHPV) can result in the formation of anogenital cancers. As hrHPV proteins E6 and E7 are required for cancer initiation and maintenance, they are ideal targets for immunotherapeutic interventions. Previously, we have described the development of DNA vaccines for the induction of HPV16 E6 and E7 specific T cell immunity. These vaccines consist of ‘gene-shuffled’ (SH) versions of HPV16 E6 and E7 that were fused to Tetanus Toxin Fragment C domain 1 (TTFC) and were named TTFC-E6SH and TTFC-E7SH. Gene-shuffling was performed to avoid the risk of inducing malignant transformation at the vaccination site. Here, we describe the preclinical safety evaluation of these candidate vaccines by analysis of their transforming capacity in vitro using established murine fibroblasts (NIH 3T3 cells) and primary human foreskin keratinocytes (HFKs). We demonstrate that neither ectopic expression of TTFC-E6SH and TTFC-E7SH alone or in combination enabled NIH 3T3 cells to form colonies in soft agar. In contrast, expression of HPV16 E6WT and E7WT alone or in combination resulted in effective transformation. Similarly, retroviral transduction of HFKs from three independent donors with both TTFC-E6SH and TTFC-E7SH alone or in combination did not show any signs of immortalization. In contrast, the combined expression of E6WT and E7WT induced immortalization in HFKs from all donors. Based on these results we consider it justified to proceed to clinical evaluation of DNA vaccines encoding TTFC-E6SH and TTFC-E7SH in patients with HPV16 associated (pre)malignancies.
Y1  - 2012
U6  - https://doi.org/10.1016/j.vaccine.2012.04.013
SN  - 0264-410X
VL  - 30
IS  - 28
SP  - 4259
EP  - 4266
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Immel, Timo
A1  - Grützke, Martin
A1  - Späte, Anne-Katrin
A1  - Groth, Ulrich
A1  - Öhlschläger, Peter
A1  - Huhn, Thomas
T1  - Synthesis and X-ray structure analysis of a heptacoordinate titanium(IV)-bis-chelate with enhanced in vivo antitumor efficacy
JF  - Chemical Communications
N2  - Chelate stabilization of a titanium(IV)–salan alkoxide by ligand exchange with 2,6-pyridinedicarboxylic acid (dipic) resulted in heptacoordinate complex 3 which is not redox-active, stable on silica gel and has increased aqueous stability. 3 is highly toxic in HeLa S3 and Hep G2 and has enhanced antitumor efficacy in a mouse cervical-cancer model.
Y1  - 2012
U6  - https://doi.org/10.1039/C2CC31624B
SN  - 1364-548X
VL  - 48
IS  - 46
SP  - 5790
EP  - 5792
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Strategies in developing thin-film sensors for monitoring aseptic food processes : Theoretical considerations and investigations of passivation materials
JF  - Electrochimica Acta
N2  - The sterilization of packages in aseptic food processes is highly significant to maintain a consumer-safe product with extended shelf-life. Today, the sterilization of food packages is predominantly accomplished by gaseous hydrogen peroxide (H2O2) in combination with heat. In order to monitor this sterilization process, calorimetric gas sensors as differential set-up of two platinum temperature sensors representing a catalytically active (additionally deposition of MnO2) and a passive segment have been recently developed. The temperature rise of the exothermic decomposition serves as an indicator of the present H2O2 concentration. In the present work, a theoretical approach considering the sensor’s thermochemistry and physical transport phenomena was formulated to evaluate the temperature rise based on the energy content of gaseous H2O2. In a further part of this work, three polymers have been analyzed with respect to their application as passivation materials. The examined polymers are photoresist SU-8, perfluoroalkoxy (PFA) and fluorinated ethylene propylene (FEP). Thermal analyses by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) have been conducted to determine the operation limits of the polymers. The overall chemical resistance and stability of the polymers against the harsh environmental conditions during the sterilization process have been examined by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR).
Y1  - 2015
U6  - https://doi.org/10.1016/j.electacta.2015.06.126
SN  - 0013-4686
VL  - 183
SP  - 130
EP  - 136
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Eurlings, Y.
A1  - Grinsven, B. van
A1  - Boyen, H.-G.
A1  - Conings, B.
A1  - Michiels, L.
A1  - Ameloot, M.
A1  - Carleer, R.
A1  - Warmer, J.
A1  - Kaul, P.
A1  - Haenen, K.
A1  - Schöning, Michael Josef
A1  - Ceuninck, W. de
A1  - Wagner, P.
T1  - Heat-transfer based characterization of DNA on synthetic sapphire chips
JF  - Sensors and Actuators B: Chemical
N2  - In this study, we show that synthetic sapphire (Al₂O₃), an established implant material, can also serve as a platform material for biosensors comparable to nanocrystalline diamond. Sapphire chips, beads, and powder were first modified with (3-aminopropyl) triethoxysilane (APTES), followed by succinic anhydride (SA), and finally single-stranded probe DNA was EDC coupled to the functionalized layer. The presence of the APTES-SA layer on sapphire powders was confirmed by thermogravimetric analyis and Fourier-transform infrared spectroscopy. Using planar sapphire chips as substrates and X-ray photoelectron spectroscopy (XPS) as surface-sensitive tool, the sequence of individual layers was analyzed with respect to their chemical state, enabling the quantification of areal densities of the involved molecular units. Fluorescence microscopy was used to demonstrate the hybridization of fluorescently tagged target DNA to the probe DNA, including denaturation- and re-hybridization experiments. Due to its high thermal conductivity, synthetic sapphire is especially suitable as a chip material for the heat-transfer method, which was employed to distinguish complementary- and non-complementary DNA duplexes containing single-nucleotide polymorphisms. These results indicate that it is possible to detect mutations electronically with a chemically resilient and electrically insulating chip material.
Y1  - 2016
U6  - https://doi.org/10.1016/j.snb.2016.02.027
SN  - 0925-4005
VL  - 230
IS  - 230
SP  - 260
EP  - 271
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Light-stimulated hydrogel actuators with incorporated graphene oxide for microfluidic applications
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - https://doi.org/10.5162/12dss2015/P5.8
SP  - 206
EP  - 209
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - https://doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - JOUR
A1  - Miyamato, Ko-ichiro
A1  - Sakakita, Sakura
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface
JF  - Electrochimica Acta
N2  - The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.
Y1  - 2015
U6  - https://doi.org/10.1016/j.electacta.2015.07.184
SN  - 0013-4686
VL  - 183
SP  - 137
EP  - 142
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Hamad, E. M.
A1  - Bilatto, S. E. R.
A1  - Adly, N. Y.
A1  - Correa, D. S.
A1  - Wolfrum, B.
A1  - Schöning, Michael Josef
A1  - Offenhäusser, A.
A1  - Yakushenko, A.
T1  - Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices
JF  - Lab on a Chip
N2  - Bonding of polymer-based microfluidics to polymer substrates still poses a challenge for Lab-On-a-Chip applications. Especially, when sensing elements are incorporated, patterned deposition of adhesives with curing at ambient conditions is required. Here, we demonstrate a fabrication method for fully printed microfluidic systems with sensing elements using inkjet and stereolithographic 3D-printing.
Y1  - 2016
U6  - https://doi.org/10.1039/C5LC01195G
SN  - 1473-0189
VL  - 16
IS  - 1
SP  - 70
EP  - 74
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Yu, Bing
A1  - Isoda, Hiroko
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Visualization of the recovery process of defects in a cultured cell layer by chemical imaging sensor
JF  - Sensors and Actuators B: Chemical
N2  - The chemical imaging sensor is a field-effect sensor which is able to visualize both the distribution of ions (in LAPS mode) and the distribution of impedance (in SPIM mode) in the sample. In this study, a novel cell assay is proposed, in which the chemical imaging sensor operated in SPIM mode is applied to monitor the recovery of defects in a cell layer brought into proximity of the sensing surface. A reduced impedance at a defect formed artificially in a cell layer was successfully visualized in a photocurrent image. The cell layer was cultured over two weeks, during which the temporal change of the photocurrent distribution corresponding to the recovery of the defect was observed.
Y1  - 2016
U6  - https://doi.org/10.1016/j.snb.2016.04.018
SN  - 0925-4005
VL  - 236
SP  - 965
EP  - 969
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Dantism, Shahriar
A1  - Takenaga, Shoko
A1  - Wagner, Patrick
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Determination of the extracellular acidification of Escherichia coli K12 with a multi-​chamber-​based LAPS system
JF  - Physica status solidi (a)
N2  - On-line monitoring of the metabolic activity of microorganisms involved in intermediate stages of biogas production plays an important role to avoid undesirable “down times” during the biogas production. In order to control this process, an on-chip differential measuring system based on the light-addressable potentiometric sensor (LAPS) principle combined with a 3D-printed multi-chamber structure has been realized. As a test microorganism, Escherichia coli K12 (E. coli K12) were used for cell-based measurements. Multi-chamber structures were developed to determine the metabolic activity of E. coli K12 in suspension for a different number of cells, responding to the addition of a constant or variable amount of glucose concentrations, enabling differential and simultaneous measurements.
Y1  - 2016
U6  - https://doi.org/10.1002/pssa.201533043
SN  - 1862-6300
VL  - 213
IS  - 6
SP  - 1479
EP  - 1485
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Strobel, M.
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, R.
A1  - Wagner, Torsten
T1  - Hydrogels with incorporated graphene oxide as light-addressable actuator materials for cell culture environments in lab-on-chip systems
JF  - Physica status solidi (a)
N2  - Abstractauthoren Graphene oxide (GO) nanoparticles were incorporated in temperature-sensitive Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels. The nanoparticles increase the light absorption and convert light energy into heat efficiently. Thus, the hydrogels with GO can be stimulated spatially resolved by illumination as it was demonstrated by IR thermography. The temporal progression of the temperature maximum was detected for different concentrations of GO within the polymer network. Furthermore, the compatibility of PNIPAAm hydrogels with GO and cell cultures was investigated. For this purpose, culture medium was incubated with hydrogels containing GO and the viability and morphology of chinese hamster ovary (CHO) cells was examined after several days of culturing in presence of this medium.
Y1  - 2016
U6  - https://doi.org/10.1002/pssa.201533056
SN  - 1862-6300
VL  - 213
IS  - 6
SP  - 1520
EP  - 1525
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Kasper, Katharina
A1  - Schiffels, Johannes
A1  - Krafft, Simone
A1  - Kuperjans, Isabel
A1  - Elbers, Gereon
A1  - Selmer, Thorsten
T1  - Biogas Production on Demand Regulated by Butyric Acid Addition
T2  - IOP Conference Series: Earth and Environmental Science. Bd. 32
Y1  - 2016
U6  - https://doi.org/10.1088/1755-1315/32/1/012009
SN  - 1755-1315
N1  - ICARET 2016, International Conference on Advances in Renewable Energy and Technologies, Putrajaya, MY, Feb 23-25, 2016
VL  - 32
SP  - 012009/1
EP  - 012009/4
ER  - 
TY  - JOUR
A1  - Bertz, Morten
A1  - Schöning, Michael Josef
A1  - Molinnus, Denise
A1  - Homma, Takayuki
T1  - Influence of temperature, light, and H₂O₂ concentration on microbial spore inactivation: in-situ Raman spectroscopy combined with optical trapping
JF  - Physica status solidi (a) applications and materials science
N2  - To gain insight on chemical sterilization processes, the influence of temperature (up to 70 °C), intense green light, and hydrogen peroxide (H₂O₂) concentration (up to 30% in aqueous solution) on microbial spore inactivation is evaluated by in-situ Raman spectroscopy with an optical trap. Bacillus atrophaeus is utilized as a model organism. Individual spores are isolated and their chemical makeup is monitored under dynamically changing conditions (temperature, light, and H₂O₂ concentration) to mimic industrially relevant process parameters for sterilization in the field of aseptic food processing. While isolated spores in water are highly stable, even at elevated temperatures of 70 °C, exposure to H₂O₂ leads to a loss of spore integrity characterized by the release of the key spore biomarker dipicolinic acid (DPA) in a concentration-dependent manner, which indicates damage to the inner membrane of the spore. Intensive light or heat, both of which accelerate the decomposition of H₂O₂ into reactive oxygen species (ROS), drastically shorten the spore lifetime, suggesting the formation of ROS as a rate-limiting step during sterilization. It is concluded that Raman spectroscopy can deliver mechanistic insight into the mode of action of H₂O₂-based sterilization and reveal the individual contributions of different sterilization methods acting in tandem.
KW  - hydrogen peroxide
KW  - optical spore trapping
KW  - Raman spectroscopy
KW  - sterilization conditions
KW  - temperature
Y1  - 2024
U6  - https://doi.org/10.1002/pssa.202300866
SN  - 1862-6319 (Online)
SN  - 1862-6300 (Print)
N1  - Corresponding author: Michael J. Schöning
IS  - Early View
PB  - Wiley-VCH
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Polen, T.
A1  - Krämer, Marco
A1  - Bongaerts, Johannes
A1  - Wubbolts, Marcel
A1  - Wendisch, V. F.
T1  - The global gene expression response of Escherichia coli to L-phenylalanine
JF  - Journal of biotechnology
Y1  - 2005
SN  - 1873-4863 (E-Journal); 0168-1656 (Print)
VL  - Vol. 115
IS  - Iss. 3
SP  - 221
EP  - 237
ER  - 
TY  - JOUR
A1  - Bongaerts, Johannes
A1  - Esser, Simon
A1  - Lorbach, Volker
A1  - Al-Momani, Lóay
A1  - Müller, Michael A.
A1  - Franke, Dirk
A1  - Grondal, Christoph
A1  - Kurutsch, Anja
A1  - Bujnicki, Robert
A1  - Takors, Ralf
A1  - Raeven, Leon
A1  - Wubbolts, Marcel
A1  - Bovenberg, Roel
A1  - Nieger, Martin
A1  - Schürmann, Melanie
A1  - Trachtmann, Natalie
A1  - Kozak, Stefan
A1  - Sprenger, Georg A.
A1  - Müller, Michael
T1  - Diversity-oriented production of metabolites derived from chorismate and their use in organic synthesis
JF  - Angewandte Chemie International Edition
Y1  - 2011
SN  - 1521-3773 (E-Journal); 0570-0833 (Print); 1433-7851 (Print)
VL  - Vol. 50
IS  - Iss. 34
SP  - 7781
EP  - 7786
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Scheele, S.
A1  - Bongaerts, Johannes
A1  - Maurer, K.-H.
A1  - Freudl, R.
T1  - Sekretion einer Kofaktor-haltigen Oxidase durch Corynebacterium glutamicum
JF  - Chemie - Ingenieur - Technik (CIT)
Y1  - 2009
SN  - 1522-2640 (E-Journal); 0009-286X (Print)
VL  - Vol. 81
IS  - Iss. 8
SP  - 1309
ER  - 
TY  - JOUR
A1  - Rachinger, Michael
A1  - Bauch, Melanie
A1  - Strittmatter, Axel
A1  - Bongaerts, Johannes
A1  - Evers, Stefan
A1  - Maurer, Karl-Heinz
A1  - Daniel, Rolf
A1  - Liebl, Wolfgang
A1  - Liesegang, Heiko
A1  - Ehrenreich, Armin
T1  - Size unlimited markerless deletions by a transconjugative plasmid-system in Bacillus licheniformis
JF  - Journal of biotechnology
Y1  - 2013
SN  - 1873-4863 (E-Journal); 0168-1656 (Print)
VL  - Vol. 164
IS  - Iss. 4
SP  - 365
EP  - 369
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Iken, Heiko
A1  - Bronder, Thomas
A1  - Goretzki, Alexander
A1  - Kriesel, Jana
A1  - Ahlborn, Kristina
A1  - Gerlach, Frank
A1  - Vonau, Winfried
A1  - Zander, Willi
A1  - Schubert, Jürgen
A1  - Schöning, Michael Josef
T1  - Development of a Combined pH- and Redox-Sensitive Bi-Electrode Glass Thin-Film Sensor
JF  - physica status solidi a : applications and materials sciences
Y1  - 2019
U6  - https://doi.org/10.1002/pssa.201900114
SN  - 1862-6319
VL  - 216
IS  - 12
SP  - 1
EP  - 8
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Muschallik, Lukas
A1  - Kipp, Carina Ronja
A1  - Recker, Inga
A1  - Bongaerts, Johannes
A1  - Pohl, Martina
A1  - Gelissen, Melanie
A1  - Schöning, Michael Josef
A1  - Selmer, Thorsten
A1  - Siegert, Petra
T1  - Synthesis of α-hydroxy ketones and vicinal diols with the Bacillus licheniformis DSM 13T butane-2, 3-diol dehydrogenase
JF  - Journal of Biotechnology
N2  - The enantioselective synthesis of α-hydroxy ketones and vicinal diols is an intriguing field because of the broad applicability of these molecules. Although, butandiol dehydrogenases are known to play a key role in the production of 2,3-butandiol, their potential as biocatalysts is still not well studied. Here, we investigate the biocatalytic properties of the meso-butanediol dehydrogenase from Bacillus licheniformis DSM 13T (BlBDH). The encoding gene was cloned with an N-terminal StrepII-tag and recombinantly overexpressed in E. coli. BlBDH is highly active towards several non-physiological diketones and α-hydroxyketones with varying aliphatic chain lengths or even containing phenyl moieties. By adjusting the reaction parameters in biotransformations the formation of either the α-hydroxyketone intermediate or the diol can be controlled.
Y1  - 2020
SN  - 2590-1559
U6  - https://doi.org/10.1016/j.jbiotec.2020.09.016
VL  - 202
IS  - Vol. 324
SP  - 61
EP  - 70
PB  - Elsevier
CY  - Amsterdam
ER  -