TY  - BOOK
A1  - Maercker, Gisela
T1  - Statistical inference in conditional heteroskedastic autoregressive models
Y1  - 1997
SN  - 3-8265-2486-1
N1  - Berichte aus der Mathematik ; Zugl.: Braunschweig, Techn. Univ., Diss., 1996
PB  - Shaker
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Statistical modeling of laser welding of DP/TRIP steel sheets
JF  - Optics and laser technology
N2  - In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box–Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.
Y1  - 2012
U6  - https://doi.org/10.1016/j.optlastec.2011.05.025
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 92
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Hartung, Frank
A1  - Girod, Bernd
T1  - Statistical optimization of switched two-level quantizers with application to DPCM encoding of color video / Hartung, Frank ; Girod, Bernd
JF  - IEEE International Conference on Acoustics, Speech, and Signal Processing, 1996. ICASSP-96. Conference Proceedings., 1996
Y1  - 1996
SN  - 0-7803-3192-3
SP  - 1974
EP  - 1977
ER  - 
TY  - JOUR
A1  - Heinrich, U.
A1  - Blum, A.
A1  - Bussmann, N.
A1  - Engels, R.
A1  - Kemmerling, G.
A1  - Weber, S.
A1  - Ziemons, Karl
T1  - Statistical studies on the light output and energy resolution of small LSO single crystals with different surface treatments combined with various reflector materials
JF  - Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
N2  - The optimization of light output and energy resolution of scintillators is of special interest for the development of high resolution and high sensitivity PET. The aim of this work is to obtain statistically reliable results concerning optimal surface treatment of scintillation crystals and the selection of reflector material. For this purpose, raw, mechanically polished and etched LSO crystals (size 2×2×10 mm3) were combined with various reflector materials (Teflon tape, Teflon matrix, BaSO4) and exposed to a 22Na source. In order to ensure the statistical reliability of the results, groups of 10 LSO crystals each were measured for all combinations of surface treatment and reflector material. Using no reflector material the light output increased up to 551±35% by mechanical polishing the surface compared to 100±5% for raw crystals. Etching the surface increased the light output to 441±29%. The untreated crystals had an energy resolution of 24.6±4.0%. By mechanical polishing the surface it was possible to achieve an energy resolution of 13.2±0.8%, by etching of 14.8±0.7%. In combination with BaSO4 as reflector material the maximum increase of light output has been established to 932±57% for mechanically polished and 895±61% for etched crystals. The combination with BaSO4 also caused the best improvement of the energy resolution up to 11.6±0.2% for mechanically polished and 12.2±0.3% for etched crystals. Relating to the light output there was no significant statistical difference between the two surface treatments in combination with BaSO4. In contrast to this, the statistical results of the energy resolution have shown the combination of mechanical polishing and BaSO4 as the optimum.
Y1  - 2002
SN  - 0168-9002
N1  - Proceedings of the 6th International Conference on Inorganic Scin tillators and their Use in Scientific and Industrial Applications
VL  - 486
IS  - 1-2
SP  - 60
EP  - 66
ER  - 
TY  - JOUR
A1  - Weigand, Christoph
T1  - Statistical Tests Based on Reliability and Precision
JF  - Economic Quality Control : EQC ; international journal for quality and reliability
N2  - The construction of a statistical test is investigated which is based only on “reliability” and “precision” as quality criteria. The reliability of a statistical test is quantifiedin a straightforward way by the probability that the decision of the test is correct.  However, the quantification of the precision of a statistical test is not at all evident.  Thereforethe paper presents and discusses several approaches.  Moreover the distinction of “nullhypothesis” and “alternative hypothesis” is not necessary any longer.
Y1  - 2012
U6  - https://doi.org/10.1515/eqc-2012-0002
SN  - 1869-6147
VL  - 27
IS  - 1
SP  - 43
EP  - 64
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - RPRT
A1  - Conan, Yulian
A1  - D'Haeyer, R.
A1  - Béguin, P.
A1  - Döring, Bernd
A1  - Kuhnhenne, Markus
A1  - Bayo, E.
T1  - Steel in low-rise building : a symbiosis of cold formed sections and light rolled profiles : final report. Contract-No. 7215-PP/070. EUR 22080 en
Y1  - 2006
SN  - 92-79-02082-X
PB  - Office for Official Publications of the European Communities
CY  - Luxembourg
ER  - 
TY  - JOUR
A1  - Döring, Bernd
A1  - Reger, Vitali
A1  - Kuhnhenne, Markus
A1  - Feldmann, Markus
A1  - Kesti, Jyrki
A1  - Lawson, Mark
A1  - Botti, Andrea
T1  - Steel solutions for enabling zero-energy buildings
JF  - Steel Construction - Design
and Research
Y1  - 2015
U6  - https://doi.org/10.1002/stco.201510029
SN  - 1867-0539
N1  - The 13th Nordic Steel Construction Conference, Tampere, 2015 (NSCC-2015)
VL  - 8
IS  - 3
SP  - 194
EP  - 200
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - BOOK
A1  - Artmann, Gerhard
T1  - Stem cell engineering : principles and applications / Gerhard M. Artmann ... eds.
Y1  - 2011
SN  - 978-3-642-11864-7
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Chanson, Hubert
A1  - Bung, Daniel Bernhard
A1  - Matos, J.
T1  - Stepped spillways and cascades
T2  - Energy dissipation in hydraulic structures / Hubert Chanson (ed.)
Y1  - 2015
SN  - 978-1-138-02755-8 (print) ; 978-1-315-68029-3 (e-Book)
SP  - 45
EP  - 64
PB  - CRC Press
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - BOOK
A1  - Kaminsky, Radoslav
A1  - Kallweit, Stephan
A1  - Weber, Hans-Joachim
A1  - Simons, Antoine
A1  - Verdonck, Pascal
T1  - Stereo high speed PIV measurements behind two different artificial heart valves
Y1  - 2006
N1  - International Symposium on Applications of Laser Techniques to Fluid Mechanics <13, 2006, Lisboa>
ER  - 
TY  - JOUR
A1  - Selmer, Thorsten
A1  - Scott, Richard
A1  - Näser, Ulrike
A1  - Friedrich, Peter
T1  - Stereochemistry of hydrogen removal from the 'unactivated' C-3 position of 4-hydroxybutyryl-CoA catalysed by 4-hydroxybutyryl-CoA dehydratase / Scott, R. ; Näser, U. ; Friedrich, P. ; Selmer, T. ; Buckel, W. ; Golding, BT.
JF  - Chemical Communications : ChemCom (2004)
Y1  - 2004
SN  - 1364-548X
SP  - 1210
EP  - 1211
ER  - 
TY  - JOUR
A1  - Selmer, Thorsten
A1  - Darley, Dan J.
A1  - Clegg, William
A1  - Harrington, Ross W.
T1  - Stereocontrolled Synthesis of (2R,3S)-2-Methylisocitrate, a Central Intermediate in the Methylcitrate Cycle / Darley, Dan J. ; Selmer, Thorsten ; Clegg, William ; Harrington, Ross W. ; Buckel, Wolfgang ; Golding, Bernardt
JF  - Helvetica chimica acta. 86 (2003), H. 12
Y1  - 2003
SN  - 1522-2675
SP  - 3991
EP  - 3999
ER  - 
TY  - JOUR
A1  - Mang, Thomas
A1  - Kricheldorf, Hans R.
T1  - Stereospecificity of peptide synthesis by means of phosphorus derivatives: a model of peptide synthesis in molecular evolution / Kricheldorf, Hans R. ; Mang, Thomas
JF  - International Journal of Biological Macromolecules. 5 (1983), H. 5
Y1  - 1983
SN  - 0141-8130
SP  - 258
EP  - 266
ER  - 
TY  - CHAP
A1  - Gligorevic, Snjezana
T1  - Stochastic modeling of non-stationary channels
T2  - 7th European Conference on Antennas and Propagation (EuCAP) : 8 - 12 April 2013, Gothenburg, Sweden
Y1  - 2013
SN  - 978-1-4673-2187-7 ; 978-88-907018-1-8
SP  - 1677
EP  - 1681
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Butenweg, Christoph
A1  - Hinzen, Klaus-G.
A1  - Höffer, Rüdiger
T1  - Stochasticity of Wind Processes and Spectral Analysis of Structural Gust Response
T2  - Structural Dynamics with Applications in Earthquake and Wind Engineering
N2  - Wind loads have great impact on many engineering structures. Wind storms often cause irreparable damage to the buildings which are exposed to it. Along with the earthquakes, wind represents one of the most common environmental load on structures and is relevant for limit state design. Modern wind codes indicate calculation procedures allowing engineers to deal with structural systems, which are susceptible to conduct wind-excited oscillations. In the codes approximate formulas for wind buffeting are specified which relate the dynamic problem to rather abstract parameter functions. The complete theory behind is not visible in order to simplify the applicability of the procedures. This chapter derives the underlying basic relations of the spectral method for wind buffeting and explains the main important applications of it in order to elucidate part of the theoretical background of computations after the new codes. The stochasticity of the wind processes is addressed, and the analysis of analytical as well as measurement based power spectra is outlined. Short MATLAB codes are added to the Appendix 3 which carry out the computation of a single sided auto-spectrum from a statistically stationary, discrete stochastic process. Two examples are presented.
KW  - Wind turbulence
KW  - Gust wind response
KW  - Spectral analysis
Y1  - 2019
SN  - 978-3-662-57550-5 (Online)
SN  - 978-3-662-57548-2 (Print)
U6  - https://doi.org/10.1007/978-3-662-57550-5_3
SP  - 153
EP  - 196
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Tran, Ngoc Trinh
T1  - Strain based brittle failure criteria for rocks
T2  - Proceedings of (NACOME2022) The 11th National Conference on Mechanics, Vol. 1. Solid Mechanics, Rock Mechanics, Artificial Intelligence, Teaching and Training
N2  - When confining pressure is low or absent, extensional fractures are typical, with fractures occurring on unloaded planes in rock. These “paradox” fractures can be explained by a phenomenological extension strain failure criterion. In the past, a simple empirical criterion for fracture initiation in brittle rock has been developed. But this criterion makes unrealistic strength predictions in biaxial compression and tension. A new extension strain criterion overcomes this limitation by adding a weighted principal shear component. The weight is chosen, such that the enriched extension strain criterion represents the same failure surface as the Mohr–Coulomb (MC) criterion. Thus, the MC criterion has been derived as an extension strain criterion predicting failure modes, which are unexpected in the understanding of the failure of cohesive-frictional materials. In progressive damage of rock, the most likely fracture direction is orthogonal to the maximum extension strain. The enriched extension strain criterion is proposed as a threshold surface for crack initiation CI and crack damage CD and as a failure surface at peak P. Examples show that the enriched extension strain criterion predicts much lower volumes of damaged rock mass compared to the simple extension strain criterion.
KW  - Extension fracture
KW  - Extension strain criterion
KW  - Mohr–Coulomb criterion
KW  - Evolution of damage
Y1  - 2023
SN  - 978-604-357-084-7
N1  - 11th National Conference on Mechanics (NACOME 2022), December 2-3, 2022, VNU University of Engineering and Technology, Hanoi, Vietnam
SP  - 500
EP  - 509
PB  - Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik)
CY  - Hanoi
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Ohler, C.
A1  - Moers, J.
T1  - Strain dependence of the valence-band offset in arsenide compound heterojunctions determined by photoelectron spectroscopy / C. Ohler ; J. Moers ; A. Förster ...
JF  - Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures. 13 (1993), H. 4
Y1  - 1993
SN  - 1071-1023
N1  - ISSN der E-Ausg.: 0734-211X
SP  - 1728
EP  - 1735
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Ohler, C.
A1  - Kohleick, R.
T1  - Strain dependence of the valence-band offset in InAs/GaAs heterojunctions determined by ultraviolet photoelectron spectroscopy / C. Ohler ; R. Kohleick ; A. Förster ...
JF  - Physical Review B . 50 (1994), H. 11
Y1  - 1994
SN  - 0163-1829
N1  - 2. ISSN: 1098-0121 ; ISSN der E-Ausg.: 1095-3795
SP  - 7833
EP  - 7837
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Rosenauer, A.
A1  - Remmele, T.
T1  - Strain determination in mismatched semiconductor heterostructures by the digital analysis of lattice images / A. Rosenauer ; T. Remmele ; U. Fischer ; A. Förster ...
JF  - Microscopy of semiconducting materials 1997 : proceedings of the Royal Microscopical Society Conference held at Oxford University, 7 - 10 April 1997 / ed. by A. G. Cullis ... - (Conference series / Institute of Physics ; 157)
Y1  - 1997
SN  - 0-7503-0464-2
N1  - MSM <10, 1997, Oxford> ; Conference on Microscopy of Semiconducting Materials <10, 1997, Oxford> ; Institut of Physics <London>
SP  - 39
EP  - ff.
PB  - Institute of Physics
CY  - Bristol [u.a.]
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Lentzen, M.
A1  - Gerthsen, D.
T1  - Strain relaxation of lattice-mismatched In0.2Ga0.8As/GaAs superlattices on GaAs(001) substrates / M. Lentzen ; D. Gerthsen ; A. Förster ...
JF  - Microscopy of semiconducting materials 1995 : proceedings of the Institute of Physics Conference held at Oxford University, 20 - 23 March 1995 / Ed. by A G Cullis ... - (Conference series / Institute of Physics ; 146)
Y1  - 1995
SN  - 0-7503-0347-6
N1  - MSM <9, 1995, Oxford> ; Institut of Physics <London>
SP  - 357
EP  - ff.
PB  - Institute of Physics
CY  - Bristol [u.a.]
ER  -