TY  - CHAP
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A Local Planner for Ackermann-Driven Vehicles in ROS SBPL
T2  - Proceedings of the International Conference on Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech), 2015
Y1  - 2015
U6  - http://dx.doi.org/10.1109/RoboMech.2015.7359518
SP  - 172
EP  - 177
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemueller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling Logistics Robots with the Action-based Language YAGI
T2  - Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Kessler, Julia
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Abbas, Karim
T1  - Basic Research on Lattice Structures Focused on the Tensile Strength
JF  - Applied Mechanics and Materials
Y1  - 2015
U6  - http://dx.doi.org/10.4028/www.scientific.net/AMM.808.193
SN  - 1662-7482
N1  - MTeM ; October 14-16, 2015, Cluj-Napoca, Romania
VL  - Vol. 808
SP  - 193
EP  - 198
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Großmann, Agnes
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
T1  - Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant
T2  - International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Gabrielli, Roland Antonius
A1  - Mathies, Johannes
A1  - Großmann, Agnes
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Space Propulsion Considerations for a Lunar Take Off Industry Based on Regolith
T2  - International Symposium on Space Technology and Science (ISTS). July 2015, Kobe, Japan
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Renftle, Georg
T1  - Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces
T2  - International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA
N2  - The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Dikta, Gerhard
A1  - Kühlheim, René
A1  - Mendonca, Jorge
A1  - Una-Alcarez, Jacobo de
T1  - Asymptotic representation of presmoothed Kaplan–Meier integrals with covariates in a semiparametric censorship model
JF  - Journal of Statistical Planning and Inference
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.jspi.2015.12.001
SN  - 0378-3758
VL  - Vol. 171
SP  - 10
EP  - 37
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, Maximillian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Monitoring of the Enzymatically Catalyzed Degradation of Biodegradable Polymers by Means of Capacitive Field-Effect Sensors
JF  - Analytical Chemistry
N2  - Designing novel or optimizing existing biodegradable polymers for biomedical applications requires numerous tests on the effect of substances on the degradation process. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) sensors have been applied for monitoring an enzymatically catalyzed degradation of polymers for the first time. The thin films of biodegradable polymer poly(d,l-lactic acid) and enzyme lipase were used as a model system. During degradation, the sensors were read-out by means of impedance spectroscopy. In order to interpret the data obtained from impedance measurements, an electrical equivalent circuit model was developed. In addition, morphological investigations of the polymer surface have been performed by means of in situ atomic force microscopy. The sensor signal change, which reflects the progress of degradation, indicates an accelerated degradation in the presence of the enzyme compared to hydrolysis in neutral pH buffer media. The degradation rate increases with increasing enzyme concentration. The obtained results demonstrate the potential of PMEIS sensors as a very promising tool for in situ and real-time monitoring of degradation of polymers.
Y1  - 2015
U6  - http://dx.doi.org/10.1021/acs.analchem.5b00617
SN  - 1520-6882
VL  - 87
IS  - 13
SP  - 6607
EP  - 6613
PB  - ACS Publications
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Miyamato, Ko-ichiro
A1  - Sakakita, Sakura
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface
JF  - Electrochimica Acta
N2  - The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.electacta.2015.07.184
SN  - 0013-4686
VL  - 183
SP  - 137
EP  - 142
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Strategies in developing thin-film sensors for monitoring aseptic food processes : Theoretical considerations and investigations of passivation materials
JF  - Electrochimica Acta
N2  - The sterilization of packages in aseptic food processes is highly significant to maintain a consumer-safe product with extended shelf-life. Today, the sterilization of food packages is predominantly accomplished by gaseous hydrogen peroxide (H2O2) in combination with heat. In order to monitor this sterilization process, calorimetric gas sensors as differential set-up of two platinum temperature sensors representing a catalytically active (additionally deposition of MnO2) and a passive segment have been recently developed. The temperature rise of the exothermic decomposition serves as an indicator of the present H2O2 concentration. In the present work, a theoretical approach considering the sensor’s thermochemistry and physical transport phenomena was formulated to evaluate the temperature rise based on the energy content of gaseous H2O2. In a further part of this work, three polymers have been analyzed with respect to their application as passivation materials. The examined polymers are photoresist SU-8, perfluoroalkoxy (PFA) and fluorinated ethylene propylene (FEP). Thermal analyses by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) have been conducted to determine the operation limits of the polymers. The overall chemical resistance and stability of the polymers against the harsh environmental conditions during the sterilization process have been examined by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR).
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.electacta.2015.06.126
SN  - 0013-4686
VL  - 183
SP  - 130
EP  - 136
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Schusser, Sebastian
A1  - Bäcker, M.
A1  - Leinhos, Marcel
A1  - Schöning, Michael Josef
T1  - Real-time in-situ electrical monitoring of the degradation of biopolymers using semiconductor field-effect devices
T2  - Biodegradable biopolymers. Vol. 1
Y1  - 2015
SN  - 978-1-63483-632-6
SP  - 135
EP  - 153
PB  - Nova Science Publ.
CY  - Hauppauge
ER  - 
TY  - CHAP
A1  - Kremers, Alexander
A1  - Pieper, Martin
T1  - Simulation and Verification of Bionic Heat Exchangers with COMSOL Multiphysics® Software
T2  - COMSOL Conference 2015 User Presentations ; COMSOL Conference 2015 Grenoble October 14 - 16, 2015 - World Trade Center, Grenoble, France
Y1  - 2015
PB  - COMSOL
CY  - Göttingen ; Berlin
ER  - 
TY  - JOUR
A1  - Grundmann, Jan Thimo
A1  - Dachwald, Bernd
A1  - Grimm, Christian D.
A1  - Kahle, Ralph
A1  - Koch, Aaron Dexter
A1  - Krause, Christian
A1  - Lange, Caroline
A1  - Quantius, Dominik
A1  - Ulamec, Stephan
T1  - Spacecraft for Hypervelocity Impact Research – An Overview of Capabilities, Constraints and the Challenges of Getting There
JF  - Procedia Engineering
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.04.021
SN  - 1877-7058
N1  - Proceedings of the 2015 Hypervelocity Impact Symposium (HVIS 2015)
VL  - Vol. 103
SP  - 151
EP  - 158
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Cordero, Frederico
A1  - Dachwald, Bernd
A1  - Koncz, Alexander
A1  - Krause, Christian
A1  - Mikschl, Tobias
A1  - Montenegro, Sergio
A1  - Quantius, Dominik
A1  - Ruffer, Michael
A1  - Sasaki, Kaname
A1  - Schmitz, Nicole
A1  - Seefeldt, Patric
A1  - Tóth, Norbert
A1  - Wejmo, Elisabet
T1  - From Sail to Soil – Getting Sailcraft Out of the Harbour on a Visit to One of Earth’s Nearest Neighbours
T2  - 4th IAA Planetary Denfense Conference - PDC 2015,  13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Pirovano, Laura
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Attitude and Orbital Dynamics Modeling for an Uncontrolled Solar-Sail Experiment in Low-Earth Orbit
T2  - 25th International Symposium on Spaceflight Dynamics, 2015, Munich, Germany
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Sadykov, R.
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
T1  - Changes in intestinal microflora in rats induced by oral exposure to low lead (II) concentrations
T2  - Lead Exposure and Poisoning: Clinical Symptoms, Medical Management and Preventive Strategies
Y1  - 2015
SN  - 9781634826990
SP  - 75
EP  - 99
PB  - Nova Science Publ.
ER  - 
TY  - CHAP
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Light-stimulated hydrogel actuators with incorporated graphene oxide for microfluidic applications
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P5.8
SP  - 206
EP  - 209
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Kazari, Masahide
A1  - Okada, Kunio
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haji Ayed, Anis
T1  - Developments of Hydrogen Dry Low Emission Combustion Technology
T2  - Annual Congress of Gas Turbine Society Japan, 2015
Y1  - 2015
N1  - Abstract in engl.; Text in japanisch
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Kazari, Masahide
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haj Ayed, Anis
T1  - Application of Low NOx Micro-Mix Hydrogen Combustion to Industrial Gas Turbine Combustor and Conceptual Design
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0238
SP  - 141
EP  - 146
ER  -