TY  - JOUR
A1  - Yoshinobu, Tatsuo
A1  - Miyamoto, Ko-ichiro
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Recent developments of chemical imaging sensor systems based on the principle of the light-addressable potentiometric sensor
JF  - Sensors and actuators B: Chemical
N2  - The light-addressable potentiometric sensor (LAPS) is an electrochemical sensor with a field-effect structure to detect the variation of the Nernst potential at its sensor surface, the measured area on which is defined by illumination. Thanks to this light-addressability, the LAPS can be applied to chemical imaging sensor systems, which can visualize the two-dimensional distribution of a particular target ion on the sensor surface. Chemical imaging sensor systems are expected to be useful for analysis of reaction and diffusion in various electrochemical and biological samples. Recent developments of LAPS-based chemical imaging sensor systems, in terms of the spatial resolution, measurement speed, image quality, miniaturization and integration with microfluidic devices, are summarized and discussed.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.snb.2014.09.002
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
VL  - 207, Part B
SP  - 926
EP  - 932
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wu, Chunsheng
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Werner, Frederik
A1  - Schöning, Michael Josef
T1  - Label-free detection of DNA using light-addressable potentiometric sensor modified with a positively charged polyelectrolyte layer
JF  - Nanoscale
N2  - A multi-spot (16 spots) light-addressable potentiometric sensor (MLAPS) consisting of an Al–p-Si–SiO2 structure modified with a weak polyelectrolyte layer of PAH (poly(allylamine hydrochloride)) was applied for the label-free electrical detection of DNA (deoxyribonucleic acid) immobilization and hybridization by the intrinsic molecular charge for the first time. To achieve a preferentially flat orientation of DNA strands and thus, to reduce the distance between the DNA charge and MLAPS surface, the negatively charged probe single-stranded DNAs (ssDNA) were electrostatically adsorbed onto the positively charged PAH layer using a simple layer-by-layer (LbL) technique. In this way, more DNA charge can be positioned within the Debye length, yielding a higher sensor signal. The surface potential changes in each spot induced due to the surface modification steps (PAH adsorption, probe ssDNA immobilization, hybridization with complementary target DNA (cDNA), non-specific adsorption of mismatched ssDNA) were determined from the shifts of photocurrent–voltage curves along the voltage axis. A high sensor signal of 83 mV was registered after immobilization of probe ssDNA onto the PAH layer. The hybridization signal increases from 5 mV to 32 mV with increasing the concentration of cDNA from 0.1 nM to 5 μM. In contrast, a small signal of 5 mV was recorded in the case of non-specific adsorption of fully mismatched ssDNA (5 μM). The obtained results demonstrate the potential of the MLAPS in combination with the simple and rapid LbL immobilization technique as a promising platform for the future development of multi-spot light-addressable label-free DNA chips with direct electrical readout.
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C4NR07225A
VL  - 14
IS  - 7
SP  - 6143
EP  - 6150
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Warmer, Johannes
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
A1  - Kaul, Peter
T1  - Detection of triacetone triperoxide using temperature cycled metal-oxide semiconductor gas sensors
JF  - Physica status solidi (a)
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431882
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1289
EP  - 1298
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Uncertainty multimode failure and shakedown analysis of shells
T2  - Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...
N2  - This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.
KW  - Limit analysis
KW  - Shakedown analysis
KW  - Reliability analysis
KW  - Multimode failure
KW  - Non-linear optimization
Y1  - 2015
SN  - 978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)
U6  - http://dx.doi.org/10.1007/978-3-319-12928-0_14
SP  - 279
EP  - 298
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Takenaga, Shoko
A1  - Schneider, Benno
A1  - Erbay, E.
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
JF  - Physica status solidi (a)
N2  - A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201532053
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1347
EP  - 1352
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Seynnes, O. R.
A1  - Bojsen-Moller, J.
A1  - Albracht, Kirsten
A1  - Arndt, A.
A1  - Cronin, N. J.
A1  - Finni, T.
A1  - Magnusson, S. P.
T1  - Ultrasound-based testing of tendon mechanical properties: a critical evaluation
JF  - Journal of Applied Physiology
Y1  - 2015
U6  - http://dx.doi.org/10.1152/japplphysiol.00849.2014
SN  - 8750-7587
VL  - 118
IS  - 2
SP  - 133
EP  - 141
ER  - 
TY  - THES
A1  - Seifarth, Volker
T1  - Ureteral tissue engineering : development of a bioreactor system and subsequent characterization of the generated biohybrids
Y1  - 2015
N1  - Duisburg, Essen, Universität Duisburg-Essen, Diss., 2015
PB  - Universitätsbibliothek Duisburg-Essen
CY  - Duisburg ; Essen
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Krischer, M.
A1  - Leinhos, Marcel
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - An application of field-effect sensors for in-situ monitoring of degradation of biopolymers
JF  - Sensors and actuators B: Chemical
N2  - The characterization of the degradation kinetics of biodegradable polymers is mandatory with regard to their proper application. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) field-effect sensors have been applied for in-situ monitoring of the pH-dependent degradation kinetics of the commercially available biopolymer poly(d,l-lactic acid) (PDLLA) in buffer solutions from pH 3 to pH 13. PDLLA films of 500 nm thickness were deposited on the surface of an Al–p-Si–SiO2–Ta2O5 structure from a polymer solution by means of spin-coating method. The PMEIS sensor is, in principle, capable to detect any changes in bulk, surface and interface properties of the polymer induced by degradation processes. A faster degradation has been observed for PDLLA films exposed to alkaline solutions (pH 9, pH 11 and pH 13).
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.snb.2014.10.058
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
VL  - 207, Part B
SP  - 954
EP  - 959
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, Maximillian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Monitoring of the Enzymatically Catalyzed Degradation of Biodegradable Polymers by Means of Capacitive Field-Effect Sensors
JF  - Analytical Chemistry
N2  - Designing novel or optimizing existing biodegradable polymers for biomedical applications requires numerous tests on the effect of substances on the degradation process. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) sensors have been applied for monitoring an enzymatically catalyzed degradation of polymers for the first time. The thin films of biodegradable polymer poly(d,l-lactic acid) and enzyme lipase were used as a model system. During degradation, the sensors were read-out by means of impedance spectroscopy. In order to interpret the data obtained from impedance measurements, an electrical equivalent circuit model was developed. In addition, morphological investigations of the polymer surface have been performed by means of in situ atomic force microscopy. The sensor signal change, which reflects the progress of degradation, indicates an accelerated degradation in the presence of the enzyme compared to hydrolysis in neutral pH buffer media. The degradation rate increases with increasing enzyme concentration. The obtained results demonstrate the potential of PMEIS sensors as a very promising tool for in situ and real-time monitoring of degradation of polymers.
Y1  - 2015
U6  - http://dx.doi.org/10.1021/acs.analchem.5b00617
SN  - 1520-6882
VL  - 87
IS  - 13
SP  - 6607
EP  - 6613
PB  - ACS Publications
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, M.
A1  - Molin, D. G. M.
A1  - Akker, N. M. S. van den
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Sensor System for in-situ and Real-time Monitoring of Polymer (bio) degradation
JF  - Procedia Engineering
N2  - A sensor system for investigating (bio)degradationprocesses of polymers is presented. The system utilizes semiconductor field-effect sensors and is capable of monitoring the degradation process in-situ and in real-time. The degradation of the polymer poly(d,l-lactic acid) is exemplarily monitored in solutions with different pH value, pH-buffer solution containing the model enzyme lipase from Rhizomucormiehei and cell-culture medium containing supernatants from stimulated and non-stimulated THP-1-derived macrophages mimicking activation of the immune system.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.815
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 948
EP  - 951
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Röth, A.
A1  - Slabu, I.
A1  - Kolvenbach, K.
A1  - Engelmann, Ulrich M.
A1  - Baumann, M.
A1  - Schmitz-Rode, T.
A1  - Trahms, L.
A1  - Neumann, U.
T1  - Aufnahmekinetik von magnetischen Nanopartikeln zur Tumortherapie in humanen Pankreaskarzinomzelllinien
JF  - Zeitschrift für Gastroenterologie
Y1  - 2015
U6  - http://dx.doi.org/10.1055/s-0035-1559529
SN  - 1439-7803
VL  - 53
IS  - 8
SP  - KC139
PB  - Thieme
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Reisert, Steffen
A1  - Geissler, H.
A1  - Weiler, C.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Multiple sensor-type system for monitoring the microbicidal effectiveness of aseptic sterilisation processes
JF  - Food control
N2  - The present work describes a novel multiple sensor-type system for the real-time analysis of aseptic sterilisation processes employing gaseous hydrogen peroxide (H2O2) as a sterilant. The inactivation kinetics of Bacillus atrophaeus by gaseous H2O2 have been investigated by means of a methodical calibration experiment, taking into account the process variables H2O2 concentration, humidity and gas temperature. It has been found that the microbicidal effectiveness at H2O2 concentrations above 2% v/v is largely determined by the concentration itself, while at lower H2O2 concentrations, the gas temperature and humidity play a leading role. Furthermore, the responses of different types of gas sensors towards the influencing factors of the sterilisation process have been analysed within the same experiment. Based on a correlation established between the inactivation kinetics and the sensor responses, a calorimetric H2O2 sensor and a metal-oxide semiconductor (MOX) sensor have been identified as possible candidates for monitoring the microbicidal effectiveness of aseptic sterilisation processes employing gaseous H2O2. Therefore, two linear models that describe the relationship between sensor response and microbicidal effectiveness have been proposed.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.foodcont.2014.07.063
SN  - 1873-7129 (E-Journal); 0956-7135 (Print)
VL  - 47
SP  - 615
EP  - 622
ER  - 
TY  - JOUR
A1  - Pöttgen, Philipp
A1  - Ederer, Thorsten
A1  - Altherr, Lena
A1  - Pelz, Peter F.
T1  - Developing a control strategy for booster stations under uncertain load
JF  - Applied Mechanics and Materials
N2  - Booster stations can fulfill a varying pressure demand with high energy-efficiency, because individual pumps can be deactivated at smaller loads. Although this is a seemingly simple approach, it is not easy to decide precisely when to activate or deactivate pumps. Contemporary activation controls derive the switching points from the current volume flow through the system. However, it is not measured directly for various reasons. Instead, the controller estimates the flow based on other system properties. This causes further uncertainty for the switching decision. In this paper, we present a method to find a robust, yet energy-efficient activation strategy.
KW  - Technical Operations Research (TOR)
KW  - Booster Station
KW  - Pump System
KW  - Discrete Optimization
Y1  - 2015
SN  - 1662-7482
U6  - http://dx.doi.org/10.4028/www.scientific.net/AMM.807.241
N1  - Ebenfalls weltweit einsehbar unter:
http://wl.fst.tu-darmstadt.de/wl/publications/paper_151123_SFB805_
ICUME_Developing_a_Control_Strategy_for_Booster_Stations_under_Uncertain_Load_poettgen_ederer_pelz_altherr.pdf
VL  - 807
IS  - 807
SP  - 241
EP  - 246
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Schusser, Sebastian
A1  - Bäcker, M.
A1  - Leinhos, Marcel
A1  - Schöning, Michael Josef
T1  - Real-time in-situ electrical monitoring of the degradation of biopolymers using semiconductor field-effect devices
T2  - Biodegradable biopolymers. Vol. 1
Y1  - 2015
SN  - 978-1-63483-632-6
SP  - 135
EP  - 153
PB  - Nova Science Publ.
CY  - Hauppauge
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Katz, Evgeny
A1  - Schöning, Michael Josef
T1  - Enzyme logic AND-Reset and OR-Reset gates based on a field-effect electronic transducer modified with multi-enzyme membrane
JF  - Chemical Communications
N2  - Capacitive field-effect sensors modified with a multi-enzyme membrane have been applied for an electronic transduction of biochemical signals processed by enzyme-based AND-Reset and OR-Reset logic gates. The local pH change at the sensor surface induced by the enzymatic reaction was used for the activation of the Reset function for the first time.
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C5CC01362C
VL  - 51
SP  - 6564
EP  - 6567
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Mayer, Dirk
A1  - Schöning, Michael Josef
T1  - Gating capacitive field-effect sensors by the charge of nanoparticle/molecule hybrids
JF  - Nanoscale
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C4NR05987E
SN  - 2040-3372 (E-Journal); 2040-3364 (Print)
SP  - 1023
EP  - 1031
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Bronder, Thomas
A1  - Wu, Chunsheng
A1  - Schöning, Michael Josef
T1  - Label-free sensing of biomolecules by their intrinsic molecular charge using field-effect devices
T2  - Semiconductor Micro- and Nanoelectonics : Proceedings of the tenth international conference, Yerevan, Armenia, September 11-13
Y1  - 2015
SN  - 978-5-8084-1991-9
SP  - 61
EP  - 63
ER  - 
TY  - JOUR
A1  - Pilas, Johanna
A1  - Mariano, K.
A1  - Keusgen, M.
A1  - Selmer, Thorsten
A1  - Schöning, Michael Josef
T1  - Optimization of an Enzyme-based Multi-parameter Biosensor for Monitoring Biogas Processes
JF  - Procedia Engineering
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.702
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 532
EP  - 535
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Pilas, Johanna
A1  - Iken, Heiko
A1  - Selmer, Thorsten
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Development of a multi‐parameter sensor chip for the simultaneous detection of organic compounds in biogas processes
JF  - Physica status solidi (a)
N2  - An enzyme-based multi-parameter biosensor is developed for monitoring the concentration of formate, d-lactate, and l-lactate in biological samples. The sensor is based on the specific dehydrogenation by an oxidized β-nicotinamide adenine dinucleotide (NAD+)-dependent dehydrogenase (formate dehydrogenase, d-lactic dehydrogenase, and l-lactic dehydrogenase, respectively) in combination with a diaphorase from Clostridium kluyveri (EC 1.8.1.4). The enzymes are immobilized on a platinum working electrode by cross-linking with glutaraldehyde (GA). The principle of the determination scheme in case of l-lactate is as follows: l-lactic dehydrogenase (l-LDH) converts l-lactate into pyruvate by reaction with NAD+. In the presence of hexacyanoferrate(III), the resulting reduced β-nicotinamide adenine dinucleotide (NADH) is then regenerated enzymatically by diaphorase. The electrochemical detection is based on the current generated by oxidation of hexacyanoferrate(II) at an applied potential of +0.3 V vs. an Ag/AgCl reference electrode. The biosensor will be electrochemically characterized in terms of linear working range and sensitivity. Additionally, the successful practical application of the sensor is demonstrated in an extract from maize silage.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431894
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1306
EP  - 1312
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - A simplification for shakedown analysis of hardening structures
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen , Germany, 20.07.2015 - 23.07.2015 / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  -