TY  - JOUR
A1  - Turaliyeva, M.
A1  - Yeshibaev, A.
A1  - Digel, Ilya
A1  - Elibayeva, G.
A1  - Sydykova, A.
A1  - Uspabayeva, A.
A1  - Dosybayeva, G.
A1  - Zhylysbayeva, A.
A1  - Lakhanova, K.
T1  - Molecular-genetic identification of emerged novel invasive pathogens of Asiatic Elm Ulmus pumila L
JF  - Life science journal
N2  - The dwarf elm Ulmus pumila L. (Ulmaceae) is one of indigenous species of flora in Kazakhstan and forms a basis of dendroflora in virtually all settlements of the region. In the past decade, multiple outbreaks of previously unknown diseases of the small-leaved elm have been registered. In our study, by the molecular-genetic analysis it was found that the pathogens responsible for the outbreaks are microfungi belonging to the genus Fusarium – F. solani and F. oxysporum. The nucleotide sequences (ITS regions) isolated from the diseased trees showed very high similarity with the GenBank control numbers EU625403.1 and FJ478128.1 (100.0 and 99.0 % respectively). Oncoming research will focus on the search of natural microbial antagonists of the discovered phytopathogens.
Y1  - 2014
U6  - https://doi.org/10.7537/marslsj1105s14.33
SN  - 1097-8135
VL  - 11
IS  - Spec. iss. 5s
SP  - 171
EP  - 175
PB  - Marsland Press
CY  - New York
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Koch, Jan-Peter
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Evaluation of a computational model for drug action on cardiac tissue
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Müller, Wolfram
ED  - Onate, E.
T1  - Optimization of the flight style in ski jumping
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
N1  - Das Paper wurde nach der Konferenz überarbeitet.
SP  - 799
EP  - 810
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Sora, M.-C.
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Uncertain multimode failure and limit analysis of shells
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A face-based smoothed finite element method for hyperelastic models and tissue growth
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Staat, Manfred
A1  - Stavroulakis, G. E.
ED  - Onate, E.
T1  - A multicriteria method for truss optimization
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Mansurov, Z. A.
A1  - Jandosov, J. M.
A1  - Kerimkulova, A. R.
A1  - Azat, S.
A1  - Zhubanova, A. A.
A1  - Digel, Ilya
A1  - Savistkaya, I. S.
A1  - Akimbekov, Nuraly S.
A1  - Kistaubaeva, A. S.
T1  - Nanostructured carbon materials for biomedical use
JF  - Eurasian chemico-technological journal : quarterly journal of the International Higher Education Academy of Sciences
N2  - One of the priority trends of carbon nanotechnology is creation of nanocomposite systems. Such carbon nanostructured composites were produced using - raw materials based on the products of agricultural waste, such as grape stones, apricot stones, rice husk. These products have a - wide spectrum of application and can be obtained in large quantities. The Institute of Combustion Problems has carried out the work on synthesis of the nanostructured carbon sorbents for multiple applications including the field of biomedicine. The article presents the data on the synthesis and physico-chemical properties of carbonaceous sorbents using physicochemical methods of investigation: separation and purification of biomolecules; isolation of phytohormone - fusicoccin; adsorbent INGO-1 in the form of an adsorption column for blood detoxification, oral (entero) sorbent - INGO-2; the study of efferent and probiotic properties and sorption activity in regard to the lipopolysaccharide (LPS), new biocomposites - based on carbonized rice husk (CRH) and cellular microorganisms; the use of CRH in wound treatment. A new material for blood detoxication (INGO-1) has been obtained. Adsorption of p-cresyl sulfate and indoxyl sulfate has shown that active carbon adsorbent can remove clinically significant level of p-cresyl sulfate and indoxyl sulfate from human plasma. Enterosorbent INGO-2 possesses high adsorption activity in relation to Gram-negative bacteria and their endotoxins. INGO-2 slows down the growth of conditionally pathogenic microorganisms, without having a negative effect on bifido and lactobacteria. The use of enterosorbent INGO-2 for sorption therapy may provide a solution to a complex problem - detoxication of the digestive tract and normalization of the intestinal micro ecology. The immobilized probiotic called "Riso-lact" was registered at the Ministry of Health of the Republic of Kazakhstan as a biologically active food additive. The developed technology is patented and provides production of the medicine in the form of freeze-dried biomass immobilized in vials.
Y1  - 2014
U6  - https://doi.org/10.18321/ectj224
SN  - 1562-3920
VL  - 15 (2013)
IS  - 3
SP  - 209
EP  - 217
PB  - Institute of Combustion Problems
CY  - Almaty
ER  - 
TY  - JOUR
A1  - Ciobanu, Octavian
A1  - Staat, Manfred
A1  - Rahimi, Alireza
T1  - The use of open source software in biomechanical finite element analysis
JF  - Buletinul Institutului Politehnic din Iaşi / Universitatea Tehnică Gh. Asachi, Iaşi Secţia 5, Construcţii de maşini = Machine construction = Bulletin of the Polytechnic Institute of Jassy = Izvestija Jasskogo Politechničeskogo Instituta
Y1  - 2008
SN  - 1011-2855
VL  - 54
IS  - 7/8
SP  - 213
EP  - 220
ER  - 
TY  - JOUR
A1  - Cehreli, Ruksan
A1  - Akpinar, Hale
A1  - Temiz Artmann, Aysegül
A1  - Sagol, Ozgul
T1  - Effects of Glutamine and Omega-3 Fatty Acids on Erythrocyte Deformability and Oxidative Damage in Rat Model of Enterocolitis
JF  - Gastroenterology Research
Y1  - 2015
U6  - https://doi.org/10.14740/gr683w
SN  - 1918-2813
VL  - 8
IS  - 5
SP  - 265
EP  - 273
ER  - 
TY  - CHAP
A1  - Peloni, Alessandro
A1  - Ceriotti, Matteo
A1  - Dachwald, Bernd
T1  - Solar-Sailing Trajectory Design for Close-up NEA Observations Mission
T2  - 4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
N1  - IAA-PDC-15-P-19
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
T1  - Simulating beating cardiomyocytes with electromechanical coupling
T2  - II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)
Y1  - 2015
SP  - 1
EP  - 2
ER  - 
TY  - JOUR
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
T1  - Physical response of hyperelastic models for composite materials and soft tissues
JF  - Asia pacific journal on computational engineering
Y1  - 2015
U6  - https://doi.org/10.1186/s40540-015-0015-x
SN  - 2196-1166
VL  - 2
IS  - 3 (December 2015)
SP  - 1
EP  - 18
ER  - 
TY  - JOUR
A1  - Frotscher, Ralf
A1  - Muanghong, Danita
A1  - Dursun, Gözde
A1  - Goßmann, Matthias
A1  - Temiz Artmann, Aysegül
A1  - Staat, Manfred
T1  - Sample-specific adaption of an improved electro-mechanical model of in vitro cardiac tissue
JF  - Journal of Biomechanics
N2  - We present an electromechanically coupled computational model for the investigation of a thin cardiac tissue construct consisting of human-induced pluripotent stem cell-derived atrial, ventricular and sinoatrial cardiomyocytes. The mechanical and electrophysiological parts of the finite element model, as well as their coupling are explained in detail. The model is implemented in the open source finite element code Code_Aster and is employed for the simulation of a thin circular membrane deflected by a monolayer of autonomously beating, circular, thin cardiac tissue. Two cardio-active drugs, S-Bay K8644 and veratridine, are applied in experiments and simulations and are investigated with respect to their chronotropic effects on the tissue. These results demonstrate the potential of coupled micro- and macroscopic electromechanical models of cardiac tissue to be adapted to experimental results at the cellular level. Further model improvements are discussed taking into account experimentally measurable quantities that can easily be extracted from the obtained experimental results. The goal is to estimate the potential to adapt the presented model to sample specific cell cultures.
KW  - hiPS cardiomyocytes
KW  - Homogenization
KW  - Hodgkin–Huxley models
KW  - Frequency adaption
KW  - Electromechanical modeling
KW  - Drug simulation
KW  - Computational biomechanics
KW  - Cardiac tissue
Y1  - 2016
U6  - https://doi.org/10.1016/j.jbiomech.2016.01.039
SN  - 0021-9290 (Print)
SN  - 1873-2380 (Online)
VL  - 49
IS  - 12
SP  - 2428
EP  - 2435
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Müller, Wolfram
T1  - Effect of wind on flight style optimisation in ski jumping
T2  - 15th International Symposium on Computer Simulation in Biomechanics ; July 9th-11th 2015, Edinburgh, UK
Y1  - 2016
SP  - 53
EP  - 54
PB  - The University of Edinburgh ; Loughborough University
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Boehnhardt, Herrmann
A1  - Broj, Ulrich
A1  - Geppert, Ulrich R. M. E.
A1  - Grundmann, Jan-Thimo
A1  - Seboldt, Wolfgang
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Johnson, Les
A1  - Kührt, Ekkehard
A1  - Mottola, Stefano
A1  - Macdonald, Malcolm
A1  - McInnes, Colin R.
A1  - Vasile, Massimiliano
A1  - Reinhard, Ruedeger
T1  - Gossamer roadmap technology reference study for a multiple NEO Rendezvous Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a multiple near-Earth object (NEO) rendezvous mission with solar sailcraft is currently carried out by the authors of this paper. The investigated mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy based on the DLR/ESA Gossamer technology. The main scientific objective of the mission is to explore the diversity of NEOs. After direct interplanetary insertion, the solar sailcraft should—within less than 10 years—rendezvous three NEOs that are not only scientifically interesting, but also from the point of human spaceight and planetary defense. In this paper, the objectives of the study are outlined and a preliminary potential mission profile is presented.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 211
EP  - 226
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - McInnes, Colin R.
A1  - Bothmer, Volker
A1  - Dachwald, Bernd
A1  - Geppert, Ulrich R. M. E.
A1  - Heiligers, Jeannette
A1  - Hilgers, Alan
A1  - Johnson, Les
A1  - Macdonald, Malcolm
A1  - Reinhard, Ruedeger
A1  - Seboldt, Wolfgang
A1  - Spietz, Peter
T1  - Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 227
EP  - 242
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Anding, Ralf
A1  - Tabaza, Ruth
A1  - Staat, Manfred
A1  - Trenz, Eva
A1  - Lohmann, Philipp
A1  - Klinge, Uwe
A1  - Kirschner-Hermanns, Ruth
T1  - Introducing a method of in vitro testing of different anchoring systems used for female incontinence and prolapse surgery
JF  - BioMed research international
Y1  - 2013
SN  - 1110-7251 (E-Journal); 2314-6141 (E-Journal); 1110-7243 (Print); 2314-6133 (Print)
VL  - Vol. 2013
SP  - Article ID 401417
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Goßmann, Matthias
A1  - Raatschen, Hans-Jürgen
A1  - Temiz Artmann, Aysegül
A1  - Staat, Manfred
T1  - Simulation of cardiac cell-seeded membranes using the edge-based smoothed FEM
T2  - Shell and membrane theories in mechanics and biology. (Advanced structured materials ; 45)
N2  - We present an electromechanically coupled Finite Element model for cardiac tissue. It bases on the mechanical model for cardiac tissue of Hunter et al. that we couple to the McAllister-Noble-Tsien electrophysiological model of purkinje fibre cells. The corresponding system of ordinary differential equations is implemented on the level of the constitutive equations in a geometrically and physically nonlinear version of the so-called edge-based smoothed FEM for plates. Mechanical material parameters are determined from our own pressure-deflection experimental setup. The main purpose of the model is to further examine the experimental results not only on mechanical but also on electrophysiological level down to ion channel gates. Moreover, we present first drug treatment simulations and validate the model with respect to the experiments.
Y1  - 2015
SN  - 978-3-319-02534-6 ; 978-3-319-02535-3
SP  - 187
EP  - 212
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - Stresses produced by different textile mesh implants in a tissue equivalent
JF  - BioNanoMaterials
N2  - Two single-incision mini-slings used for treating urinary incontinence in women are compared with respect to the stresses they produce in their surrounding tissue. In an earlier paper we experimentally observed that these implants produce considerably different stress distributions in a muscle tissue equivalent. Here we perform 2D finite element analyses to compare the shear stresses and normal stresses in the tissue equivalent for the two meshes and to investigate their failure behavior. The results clearly show that the Gynecare TVT fails for increasing loads in a zipper-like manner because it gradually debonds from the surrounding tissue. Contrary to that, the tissue at the ends of the DynaMesh-SIS direct may rupture but only at higher loads. The simulation results are in good agreement with the experimental observations thus the computational model helps to interpret the experimental results and provides a tool for qualitative evaluation of mesh implants.
Y1  - 2014
U6  - https://doi.org/10.1515/bnm-2014-0003
SN  - 2191-4672 (E-Journal); 2193-066X (E-Journal); 0011-8656 (Print); 1616-0177 (Print); 2193-0651 (Print)
VL  - 15
IS  - 1-2
SP  - 25
EP  - 30
PB  - De Gruyter
CY  - Berlin
ER  -