TY  - JOUR
A1  - Preiß, C.
A1  - Linder, Peter
A1  - Wendt, K.
A1  - Krystek, M.
A1  - Digel, Ilya
A1  - Gossmann, Matthias
A1  - Temiz Artmann, Aysegül
A1  - Porst, Dariusz
A1  - Kayser, Peter
A1  - Bassam, Rasha
A1  - Artmann, Gerhard
T1  - Engineering technology for plant physiology and plant stress research
N2  - Plant physiology and plant stress: Plant physiology will be much more important for human mankind because of yield and cultivation limits of crops determined by their resistance to stress. To assess and counteract various stress factors it is necessary to conduct plant research to gain information and results on plant physiology.
KW  - Pflanzenphysiologie
KW  - Pflanzenstress
KW  - Pflanzenscanner
KW  - plant stress
KW  - plant scanner
Y1  - 2011
ER  - 
TY  - JOUR
A1  - Rübbelke, Dirk
A1  - Vögele, Stefan
A1  - Grajewski, Matthias
A1  - Zobel, Luzy
T1  - Hydrogen-based steel production and global climate protection: An empirical analysis of the potential role of a European cross border adjustment mechanism
JF  - Journal of Cleaner Production
N2  - The European Union's aim to become climate neutral by 2050 necessitates ambitious efforts to reduce carbon emissions. Large reductions can be attained particularly in energy intensive sectors like iron and steel. In order to prevent the relocation of such industries outside the EU in the course of tightening environmental regulations, the establishment of a climate club jointly with other large emitters and alternatively the unilateral implementation of an international cross-border carbon tax mechanism are proposed. This article focuses on the latter option choosing the steel sector as an example. In particular, we investigate the financial conditions under which a European cross border mechanism is capable to protect hydrogen-based steel production routes employed in Europe against more polluting competition from abroad. By using a floor price model, we assess the competitiveness of different steel production routes in selected countries. We evaluate the climate friendliness of steel production on the basis of specific GHG emissions. In addition, we utilize an input-output price model. It enables us to assess impacts of rising cost of steel production on commodities using steel as intermediates. Our results raise concerns that a cross-border tax mechanism will not suffice to bring about competitiveness of hydrogen-based steel production in Europe because the cost tends to remain higher than the cost of steel production in e.g. China. Steel is a classic example for a good used mainly as intermediate for other products. Therefore, a cross-border tax mechanism for steel will increase the price of products produced in the EU that require steel as an input. This can in turn adversely affect competitiveness of these sectors. Hence, the effects of higher steel costs on European exports should be borne in mind and could require the cross-border adjustment mechanism to also subsidize exports.
Y1  - 2022
U6  - https://doi.org/10.1016/j.jclepro.2022.135040
SN  - 0959-6526
VL  - 380
IS  - Part 2, Art. Nr.:135040
PB  - Elsevier
ER  - 
TY  - JOUR
A1  - Laack, Walter van
T1  - Why natural constants are as they are
JF  - British journal of arts and social sciences
Y1  - 2013
SN  - 2046-9578 (E-Journal)
VL  - Vol. 15
IS  - Nr. 2
SP  - 198
EP  - 203
PB  - BritishJournal Publ. Inc
CY  - London
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - Limit and Shakedown Analysis for Plastic Safety of Complex Structures
JF  - Transactions of the 14th International Conference on Structural Dynamics in Reactor Technology (SMiRT-14) / Livolant, M. [ed]
Y1  - 1997
N1  - Vol. B, Paper B02/2
SP  - 33
EP  - 40
CY  - Lyon
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
A1  - Gudder, S.
A1  - Hagler, J.
T1  - An Uncertainty Relation for Joint Position-Momentum Measurements
JF  - Foundations of Physics Letters. 1 (1988), H. 3
Y1  - 1988
SN  - 1572-9524
SP  - 287
EP  - 292
ER  - 
TY  - JOUR
A1  - Grajewski, Matthias
A1  - Hron, Jaroslav
A1  - Turek, Stefan
T1  - Dual weighted a posteriori error estimation for a new nonconforming linear finite element on quadrilaterals
JF  - Applied Numerical Mathematics
N2  - After a short introduction of a new nonconforming linear finite element on quadrilaterals recently developed by Park, we derive a dual weighted residual-based a posteriori error estimator (in the sense of Becker and Rannacher) for this finite element. By computing a corresponding dual solution we estimate the error with respect to a given target error functional. The reliability and efficiency of this estimator is analyzed in several numerical experiments.
Y1  - 2005
U6  - https://doi.org/10.1016/j.apnum.2004.09.016
SN  - 0168-9274
VL  - 54
IS  - 3-4
SP  - 504
EP  - 518
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Defosse, Jerome
A1  - Kleinschmidt, Joris
A1  - Schmutz, Axel
A1  - Loop, Torsten
A1  - Staat, Manfred
A1  - Gatzweiler, Karl-Heinz
A1  - Wappler, Frank
A1  - Schieren, Mark
T1  - Dental strain on maxillary incisors during tracheal intubation with double-lumen tubes and different laryngoscopy techniques - a blinded manikin study
JF  - Journal of Cardiothoracic and Vascular Anesthesia
KW  - anaesthetic complications
KW  - dental trauma
KW  - difficult airway
KW  - double-lumen tube intubation
KW  - videolaryngoscopy
Y1  - 2022
U6  - https://doi.org/10.1053/j.jvca.2022.02.017
SN  - 1053-0770
VL  - 36
IS  - 8, Part B
SP  - 3021
EP  - 3027
PB  - Elsevier
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Artmann, Gerhard
A1  - Digel, Ilya
A1  - Zerlin, Kay
A1  - Maggakis-Kelemen, Christina
A1  - Linder, Peter
A1  - Porst, Dariusz
A1  - Kayser, Peter
A1  - Stadler, David
A1  - Dikta, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Hemoglobin senses body temperature
JF  - European Biophysics Journal
Y1  - 2009
SN  - 0175-7571
VL  - 38
IS  - 5
SP  - 589
EP  - 600
ER  - 
TY  - JOUR
A1  - Demirci, T.
A1  - Trzewik, J.
A1  - Linder, Peter
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Mechanical Stimulation of 3T3 Fibroblasts Activates Genes: Real Time PCR Products and Suppliers by Comparison
JF  - Biomedizinische Technik . 49 (2004), H. Erg.-Bd. 2
Y1  - 2004
SN  - 0932-4666
SP  - 1046
EP  - 1047
ER  - 
TY  - JOUR
A1  - Kowalski, Julia
A1  - Linder, Peter
A1  - Zierke, S.
A1  - Wulfen, B. van
A1  - Clemens, J.
A1  - Konstantinidis, K.
A1  - Ameres, G.
A1  - Hoffmann, R.
A1  - Mikucki, J.
A1  - Tulaczyk, S.
A1  - Funke, O.
A1  - Blandfort, D.
A1  - Espe, Clemens
A1  - Feldmann, Marco
A1  - Francke, Gero
A1  - Hiecker, S.
A1  - Plescher, Engelbert
A1  - Schöngarth, Sarah
A1  - Dachwald, Bernd
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Eliseev, D.
A1  - Heinen, D.
A1  - Scholz, F.
A1  - Wiebusch, C.
A1  - Macht, S.
A1  - Bestmann, U.
A1  - Reineking, T.
A1  - Zetzsche, C.
A1  - Schill, K.
A1  - Förstner, R.
A1  - Niedermeier, H.
A1  - Szumski, A.
A1  - Eissfeller, B.
A1  - Naumann, U.
A1  - Helbing, K.
T1  - Navigation technology for exploration of glacier ice with maneuverable melting probes
JF  - Cold Regions Science and Technology
N2  - The Saturnian moon Enceladus with its extensive water bodies underneath a thick ice sheet cover is a potential candidate for extraterrestrial life. Direct exploration of such extraterrestrial aquatic ecosystems requires advanced access and sampling technologies with a high level of autonomy. A new technological approach has been developed as part of the collaborative research project Enceladus Explorer (EnEx). The concept is based upon a minimally invasive melting probe called the IceMole. The force-regulated, heater-controlled IceMole is able to travel along a curved trajectory as well as upwards. Hence, it allows maneuvers which may be necessary for obstacle avoidance or target selection. Maneuverability, however, necessitates a sophisticated on-board navigation system capable of autonomous operations. The development of such a navigational system has been the focal part of the EnEx project. The original IceMole has been further developed to include relative positioning based on in-ice attitude determination, acoustic positioning, ultrasonic obstacle and target detection integrated through a high-level sensor fusion. This paper describes the EnEx technology and discusses implications for an actual extraterrestrial mission concept.
Y1  - 2016
U6  - https://doi.org/10.1016/j.coldregions.2015.11.006
SN  - 0165-232X
IS  - 123
SP  - 53
EP  - 70
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Sadykov, Rustam
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Porst, Dariusz
A1  - Linder, Peter
A1  - Kayser, Peter
A1  - Artmann, Gerhard
A1  - Savitskaya, Irina
A1  - Zhubanova, Azhar
T1  - Oral lead exposure induces dysbacteriosis in rats
JF  - Journal of Occupational Health. 51 (2009) (2009), H. 1
Y1  - 2009
SN  - 1348-9585
SP  - 64
EP  - 73
ER  - 
TY  - JOUR
A1  - Trzewik, Jürgen
A1  - Temiz Artmann, Aysegül
A1  - Linder, Peter
A1  - Demirci, T.
A1  - Digel, Ilya
A1  - Artmann, Gerhard
T1  - Evaluation of lateral mechanical tension in thin-film tissue constructs
JF  - Annals of Biomedical Engineering. 32 (2004), H. 9
Y1  - 2004
SN  - 1573-9686
SP  - 1243
EP  - 1251
ER  - 
TY  - JOUR
A1  - Bhattarai, Aroj
A1  - Jabbari, Medisa
A1  - Anding, Ralf
A1  - Staat, Manfred
T1  - Surgical treatment of vaginal vault prolapse using different prosthetic mesh implants: a finite element analysis
JF  - tm - Technisches Messen
N2  - Particularly multiparous elderly women may suffer from vaginal vault prolapse after hysterectomy due to weak support from lax apical ligaments. A decreased amount of estrogen and progesterone in older age is assumed to remodel the collagen thereby reducing tissue stiffness. Sacrocolpopexy is either performed as open or laparoscopic surgery using prosthetic mesh implants to substitute lax ligaments. Y-shaped mesh models (DynaMesh, Gynemesh, and Ultrapro) are implanted in a 3D female pelvic floor finite element model in the extraperitoneal space from the vaginal cuff to the first sacral (S1) bone below promontory. Numerical simulations are conducted during Valsalva maneuver with weakened tissues modeled by reduced tissue stiffness. Tissues are modeled as incompressible, isotropic hyperelastic materials whereas the meshes are modeled either as orthotropic linear elastic or as isotropic hyperlastic materials. The positions of the vaginal cuff and the bladder base are calculated from the pubococcygeal line for female pelvic floor at rest, for prolapse and after repair using the three meshes. Due to mesh mechanics and mesh pore deformation along the loaded direction, the DynaMesh with regular rectangular mesh pores is found to provide better mechanical support to the organs than the Gynemesh and the Ultrapro with irregular hexagonal mesh pores.

Insbesondere ältere, mehrgebährende Frauen leiden häufiger an einem Scheidenvorfall nach einer Hysterektomie aufgrund der schwachen Unterstützung durch laxe apikale Bänder. Es wird angenommen, dass eine verringerte Menge an Östrogen und Progesteron im höheren Alter das Kollagen umformt, wodurch die Gewebesteifigkeit reduziert wird. Die Sakrokolpopexie ist eine offene oder laparoskopische Operation, die mit prothetischen Netzimplantaten durchgeführt wird, um laxe Bänder zu ersetzen. Y-förmige Netzmodelle (DynaMesh, Gynemesh und Ultrapro) werden in einem 3D-Modell des weiblichen Beckenbodens im extraperitonealen Raum vom Vaginalstumpf bis zum Promontorium implantiert. Numerische Simulationen werden während des Valsalva-Manövers mit geschwächtem Gewebe durchgeführt, das durch eine reduzierte Gewebesteifigkeit modelliert wird. Die Gewebe werden als inkompressible, isotrop hyperelastische Materialien modelliert, während die Netze entweder als orthotrope linear elastische oder als isotrope hyperlastische Materialien modelliert werden. Die Positionen des Vaginalstumpfs, der Blase und der Harnröhrenachse werden anhand der Pubococcygeallinie aus der Ruhelage, für den Prolaps und nach der Reparatur unter Verwendung der drei Netze berechnet. Aufgrund der Netzmechanik und der Netzporenverformung bietet das DynaMesh mit regelmäßigen rechteckigen Netzporen eine bessere mechanische Unterstützung und eine Neupositionierung des Scheidengewölbes, der Blase und der Urethraachse als Gynemesh und Ultrapro mit unregelmäßigen hexagonalen Netzporen.
Y1  - 2018
U6  - https://doi.org/10.1515/teme-2017-0115
SN  - 2196-7113
VL  - 85
IS  - 5
SP  - 331
EP  - 342
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Birgel, Stefan
A1  - Leschinger, Tim
A1  - Wegmann, Kilian
A1  - Staat, Manfred
T1  - Calculation of muscle forces and joint reaction loads in the shoulder area via an OpenSim based computer model
JF  - tm - Technisches Messen
N2  - Using the OpenSim software and verified anatomical data, a computer model for the calculation of biomechanical parameters is developed and used to determine the effect of a reattachment of the Supraspinatus muscle with a medial displacement of the muscle attachment point, which may be necessary for a rupture of the supraspinatus tendon. The results include the influence of the operation on basic biomechanical parameters such as the lever arm, as well as the calculated the muscle activations for the supraspinatus and deltoid. In addition, the influence on joint stability is examined by an analysis of the joint reaction force. The study provides a detailed description of the used model, as well as medical findings to a reattachment of the supraspinatus.

Mit der Software OpenSim und überprüften anatomischen Daten wird ein Computermodell zur Berechnung von biomechanischen Parametern entwickelt und genutzt, um den Effekt einer Refixierung des Supraspinatusmuskels mit einer medialen Verschiebung des Muskelansatzpunktes zu ermitteln, wie sie unter anderem nach einem Riss der Supraspinatussehne notwendig sein kann. Die Ergebnisse umfassen hierbei den Einfluss der Operation auf grundlegende biomechanische Parameter wie den Hebelarm sowie die berechneten Muskelaktivierungen für den Supraspinatus und Deltoideus. Zusätzlich wird der Einfluss auf die Gelenkstabilität betrachtet und durch eine Analyse der Gelenkreaktionskraft untersucht. Die Studie bietet eine detaillierte Beschreibung des genutzten Modells, sowie medizinische Erkenntnisse zu einer Refixierung des Supraspinatus.
Y1  - 2018
U6  - https://doi.org/10.1515/teme-2017-0114
SN  - 2196-7113
VL  - 85
IS  - 5
SP  - 321
EP  - 330
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Iken, Heiko
A1  - Bronder, Thomas
A1  - Goretzki, Alexander
A1  - Kriesel, Jana
A1  - Ahlborn, Kristina
A1  - Gerlach, Frank
A1  - Vonau, Winfried
A1  - Zander, Willi
A1  - Schubert, Jürgen
A1  - Schöning, Michael Josef
T1  - Development of a Combined pH- and Redox-Sensitive Bi-Electrode Glass Thin-Film Sensor
JF  - physica status solidi a : applications and materials sciences
Y1  - 2019
U6  - https://doi.org/10.1002/pssa.201900114
SN  - 1862-6319
VL  - 216
IS  - 12
SP  - 1
EP  - 8
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Kurz, R.
A1  - Linder, Peter
A1  - Trzewik, Jürgen
A1  - Rüffer, M.
A1  - Artmann, Gerhard
A1  - Digel, Ilya
A1  - Rothermel, A.
A1  - Robitzki, A.
A1  - Temiz Artmann, Aysegül
T1  - Contractile tension and beating rates of self-exciting monolayers and 3D-tissue constructs of neonatal rat cardiomyocytes
JF  - Medical and Biological Engineering and Computing
N2  - The CellDrum technology (The term 'CellDrum technology' includes a couple of slightly different technological setups for measuring lateral mechanical tension in various types of cell monolayers or 3D-tissue constructs) was designed to quantify the contraction rate and mechanical tension of self-exciting cardiac myocytes. Cells were grown either within flexible, circular collagen gels or as monolayer on top of respective 1-mum thin silicone membranes. Membrane and cells were bulged outwards by air pressure. This biaxial strain distribution is rather similar the beating, blood-filled heart. The setup allowed presetting the mechanical residual stress level externally by adjusting the centre deflection, thus, mimicking hypertension in vitro. Tension was measured as oscillating differential pressure change between chamber and environment. A 0.5-mm thick collagen-cardiac myocyte tissue construct induced after 2 days of culturing (initial cell density 2 x 10(4) cells/ml), a mechanical tension of 1.62 +/- 0.17 microN/mm(2). Mechanical load is an important growth regulator in the developing heart, and the orientation and alignment of cardiomyocytes is stress sensitive. Therefore, it was necessary to develop the CellDrum technology with its biaxial stress-strain distribution and defined mechanical boundary conditions. Cells were exposed to strain in two directions, radially and circumferentially, which is similar to biaxial loading in real heart tissues. Thus, from a biomechanical point of view, the system is preferable to previous setups based on uniaxial stretching.
Y1  - 2010
U6  - https://doi.org/10.1007/s11517-009-0552-y
SN  - 1741-0444
VL  - 48
IS  - 1
SP  - 59
EP  - 65
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Kurulgan Demirci, Eylem
A1  - Demirci, Taylan
A1  - Linder, Peter
A1  - Trzewik, Jürgen
A1  - Gierkowski, Jessica Ricarda
A1  - Gossmann, Matthias
A1  - Kayser, Peter
A1  - Porst, Dariusz
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - rhAPC reduces the endothelial cell permeability via a decrease of contractile tensions induced by endothelial cells
JF  - Journal of Bioscience and Bioengineering
N2  - All cells generate contractile tension. This strain is crucial for mechanically controlling the cell shape, function and survival. In this study, the CellDrum technology quantifying cell's (the cellular) mechanical tension on a pico-scale was used to investigate the effect of lipopolysaccharide (LPS) on human aortic endothelial cell (HAoEC) tension. The LPS effect during gram-negative sepsis on endothelial cells is cell contraction causing endothelium permeability increase. The aim was to finding out whether recombinant activated protein C (rhAPC) would reverse the endothelial cell response in an in-vitro sepsis model. In this study, the established in-vitro sepsis model was confirmed by interleukin 6 (IL-6) levels at the proteomic and genomic levels by ELISA, real time-PCR and reactive oxygen species (ROS) activation by florescence staining. The thrombin cellular contraction effect on endothelial cells was used as a positive control when the CellDrum technology was applied. Additionally, the Ras homolog gene family, member A (RhoA) mRNA expression level was checked by real time-PCR to support contractile tension results. According to contractile tension results, the mechanical predominance of actin stress fibers was a reason of the increased endothelial contractile tension leading to enhanced endothelium contractility and thus permeability enhancement. The originality of this data supports firstly the basic measurement principles of the CellDrum technology and secondly that rhAPC has a beneficial effect on sepsis influenced cellular tension. The technology presented here is promising for future high-throughput cellular tension analysis that will help identify pathological contractile tension responses of cells and prove further cell in-vitro models.
KW  - Cell permeability
KW  - Cellular force
KW  - Endothelial cells
KW  - Recombinant activated protein C
KW  - Lipopolysaccharide
KW  - Contractile tension
KW  - CellDrum
Y1  - 2012
U6  - https://doi.org/10.1016/j.jbiosc.2012.03.019
SN  - 1347-4421
VL  - 113
IS  - 2
SP  - 212
EP  - 219
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Ringers, Christa
A1  - Bialonski, Stephan
A1  - Ege, Mert
A1  - Solovev, Anton
A1  - Hansen, Jan Niklas
A1  - Jeong, Inyoung
A1  - Friedrich, Benjamin M.
A1  - Jurisch-Yaksi, Nathalie
T1  - Novel analytical tools reveal that local synchronization of cilia coincides with tissue-scale metachronal waves in zebrafish multiciliated epithelia
JF  - eLife
N2  - Motile cilia are hair-like cell extensions that beat periodically to generate fluid flow along various epithelial tissues within the body. In dense multiciliated carpets, cilia were shown to exhibit a remarkable coordination of their beat in the form of traveling metachronal waves, a phenomenon which supposedly enhances fluid transport. Yet, how cilia coordinate their regular beat in multiciliated epithelia to move fluids remains insufficiently understood, particularly due to lack of rigorous quantification. We combine experiments, novel analysis tools, and theory to address this knowledge gap. To investigate collective dynamics of cilia, we studied zebrafish multiciliated epithelia in the nose and the brain. We focused mainly on the zebrafish nose, due to its conserved properties with other ciliated tissues and its superior accessibility for non-invasive imaging. We revealed that cilia are synchronized only locally and that the size of local synchronization domains increases with the viscosity of the surrounding medium. Even though synchronization is local only, we observed global patterns of traveling metachronal waves across the zebrafish multiciliated epithelium. Intriguingly, these global wave direction patterns are conserved across individual fish, but different for left and right noses, unveiling a chiral asymmetry of metachronal coordination. To understand the implications of synchronization for fluid pumping, we used a computational model of a regular array of cilia. We found that local metachronal synchronization prevents steric collisions, i.e., cilia colliding with each other, and improves fluid pumping in dense cilia carpets, but hardly affects the direction of fluid flow. In conclusion, we show that local synchronization together with tissue-scale cilia alignment coincide and generate metachronal wave patterns in multiciliated epithelia, which enhance their physiological function of fluid pumping.
Y1  - 2023
U6  - https://doi.org/10.7554/eLife.77701
SN  - 2050-084X
VL  - 12
PB  - eLife Sciences Publications
ER  - 
TY  - JOUR
A1  - Demirci, T.
A1  - Trzewik, J.
A1  - Linder, Peter
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Mechanical Stimulation of 3T3 Fibroblasts Activates Genes: ITGB5 and p53 Responses as Quantified on the mRNA Level
JF  - Biomedizinische Technik . 49 (2004), H. Erg.-Bd. 2
Y1  - 2004
SN  - 0932-4666
SP  - 1030
EP  - 1031
ER  - 
TY  - JOUR
A1  - Asante-Asamani, E.O.
A1  - Kleefeld, Andreas
A1  - Wade, B.A.
T1  - A second-order exponential time differencing scheme for non-linear reaction-diffusion systems with dimensional splitting
JF  - Journal of Computational Physics
N2  - A second-order L-stable exponential time-differencing (ETD) method is developed by combining an ETD scheme with approximating the matrix exponentials by rational functions having real distinct poles (RDP), together with a dimensional splitting integrating factor technique. A variety of non-linear reaction-diffusion equations in two and three dimensions with either Dirichlet, Neumann, or periodic boundary conditions are solved with this scheme and shown to outperform a variety of other second-order implicit-explicit schemes. An additional performance boost is gained through further use of basic parallelization techniques.
KW  - Exponential time differencing
KW  - Real distinct pole
KW  - Dimensional splitting
KW  - Reaction-diffusion systems
KW  - Matrix exponential
Y1  - 2020
U6  - https://doi.org/10.1016/j.jcp.2020.109490
SN  - 0021-9991
N1  - Corresponding author: Andreas Kleefeld
VL  - 415
PB  - Elsevier
CY  - Amsterdam
ER  -