TY  - GEN
A1  - Hille, Sebastian
A1  - Stumpf, Eike
A1  - Mayntz, Joscha
A1  - Dahmann, Peter
T1  - Prediction of sound exposure caused by a landing motor glider with recuperating propellers
T2  - AIAA SCITECH 2023 Forum
N2  - This paper presents an approach to predicting the sound exposure on the ground caused by a landing aircraft with recuperating propellers. The noise source along the trajectory of a flight specified for a steeper approach is simulated based on measurements of sound power levels and additional parameters of a single propeller placed in a wind tunnel. To validate the measured data/measurement results, these simulations are also supported by overflight measurements of a test aircraft. It is shown that the simple source models of propellers do not provide fully satisfactory results since the sound levels are estimated too low. Nevertheless, with a further reference comparison, margins for an acceptable increase in the sound power level of the aircraft on its now steeper approach path could be estimated. Thus, in this case, a +7 dB increase in SWL would not increase the SEL compared to the conventional approach within only 2 km ahead of the airfield.
Y1  - 2023
U6  - https://doi.org/10.2514/6.2023-0211
N1  - AIAA SCITECH 2023 Forum, 23-27 January 2023, National Harbor, Md & Online
PB  - AIAA
CY  - Reston, Va.
ER  - 
TY  - CHAP
A1  - Seefeldt, Patric
A1  - Bauer, Waldemar
A1  - Dachwald, Bernd
A1  - Grundmann, Jan Thimo
A1  - Straubel, Marco
A1  - Sznajder, Maciej
A1  - Tóth, Norbert
A1  - Zander, Martin E.
T1  - Large lightweight deployable structures for planetary defence: solar sail propulsion, solar concentrator payloads, large-scale photovoltaic power
T2  - 4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
N1  - IAA-PDC-15-P-20
ER  - 
TY  - CHAP
A1  - Kapoor, Hrshi
A1  - Boller, Christian
A1  - Giljohann, Sebastian
A1  - Braun, Carsten
T1  - Strategies for structural health monitoring implementation potential assessment in aircraft operational life extension considerations
T2  - 2nd International Symposium on NDT in Aerospace : November 22-24, 2010 Hamburg, Germany
Y1  - 2010
SN  - 978-3-940283-28-3
PB  - Dt. Gesellschaft für Zerstörungsfreie Prüfung
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Loeb, Horst W.
A1  - Schartner, Karl-Heinz
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
A1  - Seboldt, Wolfgang
T1  - An Interstellar – Heliopause mission using a combination of solar/radioisotope electric propulsion
T2  - Presented at the 32nd International Electric Propulsion Conference
N2  - There is common agreement within the scientific community that in order to understand our local galactic environment it will be necessary to send a spacecraft into the region beyond the solar wind termination shock. Considering distances of 200 AU for a new mission, one needs a spacecraft travelling at a speed of close to 10 AU/yr in order to keep the mission duration in the range of less than 25 yrs, a transfer time postulated by ESA.Two propulsion options for the mission have been proposed and discussed so far: the solar sail propulsion and the ballistic/radioisotope electric propulsion. As a further alternative, we here investigate a combination of solar-electric propulsion and radioisotope-electric propulsion. The solar-electric propulsion stage consists of six 22 cm diameter “RIT-22”ion thrusters working with a high specific impulse of 7377 s corresponding to a positive grid voltage of 5 kV. Solar power of 53 kW BOM is provided by a light-weight solar array. The REP-stage consists of four space-proven 10 cm diameter “RIT-10” ion thrusters that will be operating one after the other for 9 yrs in total. Four advanced radioisotope generators provide 648 W at BOM. The scientific instrument package is oriented at earlier studies. For its mass and electric power requirement 35 kg and 35 W are assessed, respectively. Optimized trajectory calculations, treated in a separate contribution, are based on our “InTrance” method.The program yields a burn out of the REP stage in a distance of 79.6 AU for a usage of 154 kg of Xe propellant. With a C3 = 45,1 (km/s)2 a heliocentric probe velocity of 10 AU/yr is reached at this distance, provided a close Jupiter gravity assist adds a velocity increment of 2.7 AU/yr. A transfer time of 23.8 yrs results for this scenario requiring about 450 kg Xe for the SEP stage, jettisoned at 3 AU. We interpret the SEP/REP propulsion as a competing alternative to solar sail and ballistic/REP propulsion. Omiting a Jupiter fly-by even allows more launch flexibility, leaving the mission duration in the range of the ESA specification.
Y1  - 2011
N1  - 32nd International Electric Propulsion Conference, 11-15 September. Wiesbaden, Germany
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Quitter, Julius
A1  - Marino, Matthew
A1  - Bauschat, J.-Michael
T1  - Highly Non-Planar Aircraft Configurations: Estimation of Flight Mechanical Derivatives Using Low-Order Methods
T2  - Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany
Y1  - 2019
ER  - 
TY  - PAT
A1  - Artmann, Gerhard
A1  - Linder, Peter
A1  - Bayer, Robin
A1  - Gossmann, Matthias
T1  - Celldrum electrode arrangement for measuring mechanical stress [Patent of invention]
N2  - The invention pertains to a CellDrum electrode arrangement for measuring mechanical stress, comprising a mechanical holder (1 ) and a non-conductive membrane (4), whereby the membrane (4) is at least partially fixed at its circumference to the mechanical holder (1), keeping it in place when the membrane (4) may bend due to forces acting on the membrane (4), the mechanical holder (1) and the membrane (4) forming a container, whereby the membrane (1) within the container comprises an cell- membrane compound layer or biological material (3) adhered to the deformable membrane 4 which in response to stimulation by an agent may exert mechanical stress to the membrane (4) such that the membrane bending stage changes whereby the container may be filled with an electrolyte, whereby an electric contact (2) is arranged allowing to contact said electrolyte when filled into to the container, whereby within a predefined geometry to the fixing of the membrane (4) an electrode (7) is arranged, whereby the electrode (7) is electrically insulated with respect to the electric contact (2) as well as said electrolyte, whereby mechanical stress due to an agent may be measured as a change in capacitance.
Y1  - 2017
N1  - Patent auch unter EP3403090, CN109477828, US2019033245 und LU92948 veröffentlicht.
PB  - WIPO
CY  - Geneva
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Finger, Felix
T1  - Conceptual Design of a Modular 150 kg Vertical Take-off and Landing Unmanned Aerial Vehicle
T2  - Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany
Y1  - 2019
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Börner, S.
A1  - Hendrick, P.
A1  - Elsing, R.
T1  - Testing and analysis of the impact on engine cycle parameters and control system modifications using hydrogen or methane as fuel in an industrial gas turbine
T2  - Progress in propulsion physics ; Volume 8
Y1  - 2016
SN  - 978-5-94588-191-4
U6  - https://doi.org/10.1051/eucass/201608409
SP  - 409
EP  - 426
PB  - EDP Sciences
CY  - o.O.
ER  - 
TY  - CHAP
A1  - Schulze, Sven
A1  - Mühleisen, M.
A1  - Feyerl, Günter
T1  - Adaptive energy management strategy for a heavy-duty truck with a P2-hybrid topology
T2  - 18. Internationales Stuttgarter Symposium. Proceedings
Y1  - 2018
U6  - https://doi.org/10.1007/978-3-658-21194-3
SP  - 75
EP  - 89
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Schirra, Julian
A1  - Bissonnette, William
A1  - Bramesfeld, Götz
T1  - Wake-model effects on induced drag prediction of staggered boxwings
JF  - Aerospace
Y1  - 2018
U6  - https://doi.org/10.3390/aerospace5010014
SN  - 2226-4310
VL  - 5
IS  - 1
ER  - 
TY  - CHAP
A1  - Nowack, N.
A1  - Röth, Thilo
A1  - Bührig-Polaczek, A.
A1  - Klaus, G.
ED  - Hirsch, Jürgen
T1  - Advanced Sheet Metal Components Reinforced by Light Metal Cast Structures
T2  - Aluminium alloys : their physical and mechanical properties ; [proceedings of the 11th International Conference on Aluminium Alloys, 22 - 26 Sept. 2008, Aachen, Germany ; ICAA 11]
Y1  - 2008
SN  - 978-3-527-32367-8
IS  - 2
SP  - 2374
EP  - 2381
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Uto, Takahiro
A1  - Uchiyama, Yuta
A1  - Wirsum, Manfred
A1  - Funke, Harald
A1  - Kusterer, Karsten
T1  - Application of Low NOx Micro-mix Hydrogen Combustion to 2MW Class Industrial Gas Turbine Combustor
T2  - Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan
Y1  - 2019
SN  - 978-4-89111-010-9
N1  - IGTC-2019-129
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Kreyer, Jörg
A1  - Müller, Marvin
A1  - Esch, Thomas
T1  - A Calculation Methodology for Predicting Exhaust Mass Flows and Exhaust Temperature Profiles for Heavy-Duty Vehicles
JF  - SAE International Journal of Commercial Vehicles
N2  - The predictive control of commercial vehicle energy management systems, such as vehicle thermal management or waste heat recovery (WHR) systems, are discussed on the basis of information sources from the field of environment recognition and in combination with the determination of the vehicle system condition.
In this article, a mathematical method for predicting the exhaust gas mass flow and the exhaust gas temperature is presented based on driving data of a heavy-duty vehicle. The prediction refers to the conditions of the exhaust gas at the inlet of the exhaust gas recirculation (EGR) cooler and at the outlet of the exhaust gas aftertreatment system (EAT). The heavy-duty vehicle was operated on the motorway to investigate the characteristic operational profile. In addition to the use of road gradient profile data, an evaluation of the continuously recorded distance signal, which represents the distance between the test vehicle and the road user ahead, is included in the prediction model. Using a Fourier analysis, the trajectory of the vehicle speed is determined for a defined prediction horizon.
To verify the method, a holistic simulation model consisting of several hierarchically structured submodels has been developed. A map-based submodel of a combustion engine is used to determine the EGR and EAT exhaust gas mass flows and exhaust gas temperature profiles. All simulation results are validated on the basis of the recorded vehicle and environmental data. Deviations from the predicted values are analyzed and discussed.
Y1  - 2020
U6  - https://doi.org/10.4271/02-13-02-0009
SN  - 1946-3928
VL  - 13
IS  - 2
SP  - 129
EP  - 143
PB  - SAE International
CY  - Warrendale, Pa.
ER  - 
TY  - JOUR
A1  - Meyer, Max-Arno
A1  - Granrath, Christian
A1  - Feyerl, Günter
A1  - Richenhagen, Johannes
A1  - Kaths, Jakob
A1  - Andert, Jakob
T1  - Closed-loop platoon simulation with cooperative intelligent transportation systems based on vehicle-to-X communication
JF  - Simulation Modelling Practice and Theory
Y1  - 2021
U6  - https://doi.org/10.1016/j.simpat.2020.102173
SN  - 1569-190X
VL  - 106
IS  - Art. 102173
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Geiben, Benedikt
A1  - Götten, Falk
A1  - Havermann, Marc
T1  - Aerodynamic analysis of a winged sub-orbital spaceplane
N2  - This paper primarily presents an aerodynamic CFD analysis of a winged spaceplane geometry based on the Japanese Space Walker proposal. StarCCM was used to calculate aerodynamic coefficients for a typical space flight trajectory including super-, trans- and subsonic Mach numbers and two angles of attack. Since the solution of the RANS equations in such supersonic flight regimes is still computationally expensive, inviscid Euler simulations can principally lead to a significant reduction in computational effort. The impact on accuracy of aerodynamic properties is further analysed by comparing both methods for different flight regimes up to a Mach number of 4.
Y1  - 2020
U6  - https://doi.org/10.25967/530170
N1  - 69. Deutscher Luft- und Raumfahrtkongress 2020, 1. September 2020 - 3. September 2020, online
PB  - DGLR
CY  - Bonn
ER  - 
TY  - JOUR
A1  - Gazda, Quentin
A1  - Maurischat, Andreas
T1  - Special functions and Gauss-Thakur sums in higher rank and dimension
Y1  - 2020
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Adams, Moritz
A1  - Losekamm, Martin J.
A1  - Czupalla, Markus
T1  - Development of the Thermal Control System for the RadMap Telescope Experiment on the International Space Station
T2  - International Conference on Environmental Systems
Y1  - 2020
N1  - 2020 International Conference on Environmental Systems, 12. Juli 2020 – 16. Juli 2020, Lissabon
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Wu, Ziyi
A1  - Kemper, Hans
T1  - The optimal 48 V – battery pack for a specific load profile of a heavy duty vehicle
T2  - 8. Internationale Fachtagung Kraftwerk Batterie : 26. – 27. April 2016, Münster, Deutschland
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - Bauschat, J.-Michael
A1  - Watmuff, J.H.
T1  - Accurate induced drag prediction for highly non-planar lifting systems
T2  - 19th Australasian Fluid Mechanics Conference : 8.-11. Dezember 2014, Melbourne, Australia
N2  - The impact of wake model effects is investigated for two highly
non-planar lifting systems. Dependent on the geometrical
arrangement of the configuration, the wake model shape is found
to considerably affect the estimation. Particularly at higher angles
of attack, an accurate estimation based on the common linear wake
model approaches is involved.
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - In-flight vibration-based structural health monitoring of aircraft wings
T2  - 30th Congress of the internatonal council of the aeronautical sciences : 25.-30. September 2016, Daejeon, Korea
N2  - This work presents a methodology for automated
damage-sensitive feature extraction and anomaly
detection under multivariate operational variability
for in-flight assessment of wings. The
method uses a passive excitation approach, i. e.
without the need for artificial actuation. The
modal system properties (natural frequencies and
damping ratios) are used as damage-sensitive
features. Special emphasis is placed on the use
of Fiber Bragg Grating (FBG) sensing technology
and the consideration of Operational and
Environmental Variability (OEV). Measurements
from a wind tunnel investigation with a composite
cantilever equipped with FBG and piezoelectric
sensors are used to successfully detect an impact
damage. In addition, the feasibility of damage
localisation and severity estimation is evaluated
based on the coupling found between damageand
OEV-induced feature changes.
Y1  - 2016
ER  -