TY  - CHAP
A1  - Schirra, Julian
A1  - Watmuff, Jon
A1  - Bauschat, J.-Michael
T1  - A relative assessment of existing potential-methodologies to accurately estimate the induced drag of highly non-planar lifting systems
T2  - Advanced aero concepts, design and operations : Applied Aerodynamics Conference  : July 22 -24, 2014, Bristol, UK
Y1  - 2014
SP  - 1
EP  - 13
ER  - 
TY  - JOUR
A1  - Stadler, Alexander Maximilian
A1  - Garvey, Christopher J.
A1  - Embs, Jan Peter
A1  - Koza, Michael Marek
A1  - Unruh, Tobias
A1  - Artmann, Gerhard
A1  - Zaccai, Guiseppe
T1  - Picosecond dynamics in haemoglobin from different species: A quasielastic neutron scattering study
JF  - Biochimica et biophysica acta (BBA): General Subjects
Y1  - 2014
U6  - https://doi.org/10.1016/j.bbagen.2014.06.007
SN  - 1872-8006 (E-Journal); 0304-4165 (Print)
VL  - 1840
IS  - 10
SP  - 2989
EP  - 2999
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Boehnhardt, Herrmann
A1  - Broj, Ulrich
A1  - Geppert, Ulrich R. M. E.
A1  - Grundmann, Jan-Thimo
A1  - Seboldt, Wolfgang
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Johnson, Les
A1  - Kührt, Ekkehard
A1  - Mottola, Stefano
A1  - Macdonald, Malcolm
A1  - McInnes, Colin R.
A1  - Vasile, Massimiliano
A1  - Reinhard, Ruedeger
T1  - Gossamer roadmap technology reference study for a multiple NEO Rendezvous Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a multiple near-Earth object (NEO) rendezvous mission with solar sailcraft is currently carried out by the authors of this paper. The investigated mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy based on the DLR/ESA Gossamer technology. The main scientific objective of the mission is to explore the diversity of NEOs. After direct interplanetary insertion, the solar sailcraft should—within less than 10 years—rendezvous three NEOs that are not only scientifically interesting, but also from the point of human spaceight and planetary defense. In this paper, the objectives of the study are outlined and a preliminary potential mission profile is presented.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 211
EP  - 226
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Mikucki, Jill
A1  - Tulaczyk, Slawek
A1  - Digel, Ilya
A1  - Espe, Clemens
A1  - Feldmann, Marco
A1  - Francke, Gero
A1  - Kowalski, Julia
A1  - Xu, Changsheng
T1  - IceMole : A maneuverable probe for clean in situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems
JF  - Annals of Glaciology
N2  - There is significant interest in sampling subglacial environments for geobiological studies, but they are difficult to access. Existing ice-drilling technologies make it cumbersome to maintain microbiologically clean access for sample acquisition and environmental stewardship of potentially fragile subglacial aquatic ecosystems. The IceMole is a maneuverable subsurface ice probe for clean in situ analysis and sampling of glacial ice and subglacial materials. The design is based on the novel concept of combining melting and mechanical propulsion. It can change melting direction by differential heating of the melting head and optional side-wall heaters. The first two prototypes were successfully tested between 2010 and 2012 on glaciers in Switzerland and Iceland. They demonstrated downward, horizontal and upward melting, as well as curve driving and dirt layer penetration. A more advanced probe is currently under development as part of the Enceladus Explorer (EnEx) project. It offers systems for obstacle avoidance, target detection, and navigation in ice. For the EnEx-IceMole, we will pay particular attention to clean protocols for the sampling of subglacial materials for biogeochemical analysis. We plan to use this probe for clean access into a unique subglacial aquatic environment at Blood Falls, Antarctica, with return of a subglacial brine sample.
KW  - Antarctic Glaciology
KW  - Extraterrestrial Glaciology
KW  - Glaciological instruments and methods
KW  - Subclacial exploration
KW  - Subglacial lakes
Y1  - 2014
U6  - https://doi.org/10.3189/2014AoG65A004
SN  - 1727-5644
VL  - 55
IS  - 65
SP  - 14
EP  - 22
PB  - Cambridge University Press
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - Macdonald, Malcolm
A1  - McGrath, C.
A1  - Appourchaux, T.
A1  - Dachwald, Bernd
A1  - Finsterle, W.
A1  - Gizon, L.
A1  - Liewer, P. C.
A1  - McInnes, Colin R.
A1  - Mengali, G.
A1  - Seboldt, Wolfgang
A1  - Sekii, T.
A1  - Solanki, S. K.
A1  - Velli, M.
A1  - Wimmer-Schweingruber, R. F.
A1  - Spietz, Peter
A1  - Reinhard, Ruedeger
ED  - Macdonald, Malcolm
T1  - Gossamer roadmap technology reference study for a solar polar mission
T2  - Advances in solar sailing
N2  - A technology reference study for a solar polar mission is presented. The study uses novel analytical methods to quantify the mission design space including the required sail performance to achieve a given solar polar observation angle within a given timeframe and thus to derive mass allocations for the remaining spacecraft sub-systems, that is excluding the solar sail sub-system. A parametric, bottom-up, system mass budget analysis is then used to establish the required sail technology to deliver a range of science payloads, and to establish where such payloads can be delivered to within a given timeframe. It is found that a solar polar mission requires a solar sail of side-length 100–125 m to deliver a ‘sufficient value’ minimum science payload, and that a 2.5 μm sail film substrate is typically required, however the design is much less sensitive to the boom specific mass.
Y1  - 2014
SN  - 978-3-642-34906-5
U6  - https://doi.org/10.1007/978-3-642-34907-2_17
SP  - 243
EP  - 257
PB  - Springer
CY  - Berlin, Heidelberg
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - Bauschat, J.-Michael
A1  - Watmuff, J.H.
T1  - Accurate induced drag prediction for highly non-planar lifting systems
T2  - 19th Australasian Fluid Mechanics Conference : 8.-11. Dezember 2014, Melbourne, Australia
N2  - The impact of wake model effects is investigated for two highly
non-planar lifting systems. Dependent on the geometrical
arrangement of the configuration, the wake model shape is found
to considerably affect the estimation. Particularly at higher angles
of attack, an accurate estimation based on the common linear wake
model approaches is involved.
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Niedermeier, H.
A1  - Clemens, J.
A1  - Kowalski, Julia
A1  - Macht, S.
A1  - Heinen, D.
A1  - Hoffmann, R.
A1  - Linder, Peter
T1  - Navigation system for a research ice probe for antarctic glaciers
T2  - IEEE/ION Position, Location and Navigation Symposium (PLANS) ; 5-8 May 2014, Monterey, Calif.
Y1  - 2014
SN  - 978-1-4799-3319-8
SP  - 959
EP  - 975
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - McInnes, Colin R.
A1  - Bothmer, Volker
A1  - Dachwald, Bernd
A1  - Geppert, Ulrich R. M. E.
A1  - Heiligers, Jeannette
A1  - Hilgers, Alan
A1  - Johnson, Les
A1  - Macdonald, Malcolm
A1  - Reinhard, Ruedeger
A1  - Seboldt, Wolfgang
A1  - Spietz, Peter
T1  - Gossamer roadmap technology reference study for a Sub-L1 Space Weather Mission
T2  - Advances in solar sailing
N2  - A technology reference study for a displaced Lagrange point space weather mission is presented. The mission builds on previous concepts, but adopts a strong micro-spacecraft philosophy to deliver a low mass platform and payload which can be accommodated on the DLR/ESA Gossamer-3 technology demonstration mission. A direct escape from Geostationary Transfer Orbit is assumed with the sail deployed after the escape burn. The use of a miniaturized, low mass platform and payload then allows the Gossamer-3 solar sail to potentially double the warning time of space weather events. The mission profile and mass budgets will be presented to achieve these ambitious goals.
Y1  - 2014
SN  - 978-3-642-34906-5 (Print) ; 978-3-642-34907-2 (E-Book)
SP  - 227
EP  - 242
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - GEN
A1  - Eickmann, Matthias
A1  - Esch, Thomas
A1  - Funke, Harald
A1  - Abanteriba, Sylvester
A1  - Roosen, Petra
T1  - Biofuels in Aviation – Safety Implications of Bio-Ethanol Usage in General Aviation Aircraft
N2  - Up in the clouds and above fuels and construction materials must be very carefully selected to ensure a smooth flight and touchdown. Out of around 38,000 single and dual-engined propeller aeroplanes, roughly a third are affected by a new trend in the fuel sector that may lead to operating troubles or even emergency landings: The admixture of bio-ethanol to conventional gasoline. Experiences with these fuels may be projected to alternative mixtures containing new components.
Y1  - 2014
N1  - 2. International Conference of the Cluster of Excellence Tailor-Made Fuels from Biomass, Aachen 2013
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Keinz, Jan
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Numerical Study on Increased Energy Density for the DLN Micromix Hydrogen Combustion Principle
T2  - Combustion, Fuels and Emissions (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition : Düsseldorf, Germany, June 16–20, 2014 ; Vol. 4A)
Y1  - 2014
SN  - 978-0-7918-4568-4
N1  - Paper No. GT2014-25848
SP  - V04AT04A057
PB  - ASME
CY  - New York, N.Y.
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Experimental and Numerical Study on Optimizing the DLN Micromix Hydrogen Combustion Principle for Industrial Gas Turbine Applications
T2  - ASME Turbo Expo 2015: Turbine Technical Conference and Exposition Volume 4A: Combustion, Fuels and Emissions Montreal, Quebec, Canada, June 15–19, 2015
Y1  - 2015
SN  - 978-0-7918-5668-0
U6  - https://doi.org/10.1115/GT2015-42043
SP  - V04AT04A008
ER  - 
TY  - JOUR
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Striegan, Constantin
A1  - Bohn, D.
T1  - Experimental and numerical investigations of the dry-low-NOx hydrogen micromix combustion chamber of an industrial gas turbine
JF  - Propulsion and power research
Y1  - 2015
U6  - https://doi.org/10.1016/j.jppr.2015.07.005
SN  - 2212-540X
VL  - Vol. 4
IS  - Iss. 3
SP  - 123
EP  - 131
ER  - 
TY  - JOUR
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Striegan, Constantin
A1  - Bohn, D.
T1  - Improvement study for the dry-low-NOx hydrogen micromix combustion technology
JF  - Propulsion and power research
Y1  - 2015
U6  - https://doi.org/10.1016/j.jppr.2015.07.003
SN  - 2212-540X
VL  - Vol. 4
IS  - Iss. 3
SP  - 132
EP  - 140
ER  - 
TY  - CHAP
A1  - Neu, Eugen
A1  - Janser, Frank
A1  - Khatibi, Akbar A.
A1  - Orifici, Adrian C.
T1  - Operational modal analysis of a cantilever in a wind tunnel using optical fiber bragg grating sensors
T2  - 6th International Operational Modal Analysis Conference. IOMAC´15. 2015 May 12-14 Gijon - Spain
Y1  - 2015
U6  - https://doi.org/10.13140/RG.2.1.3753.0324
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Kazari, Masahide
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haj Ayed, Anis
T1  - Application of Low NOx Micro-Mix Hydrogen Combustion to Industrial Gas Turbine Combustor and Conceptual Design
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0238
SP  - 141
EP  - 146
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Haj Ayed, A.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Development and Testing of a Low NOx Micromix Combustion Chamber for an Industrial Gas Turbine
T2  - Proceedings of International Gas Turbine Congress 2015 Tokyo November 15-20, 2015, Tokyo, Japan
Y1  - 2015
SN  - 978-4-89111-008-6
N1  - IGTC15-0092
SP  - 131
EP  - 140
ER  - 
TY  - CHAP
A1  - Roosen, Petra
A1  - Feyerl, Günter
T1  - Gender-specific perception and utilization of personal use vehicles
T2  - FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1
Y1  - 2015
SN  - 978-1-5108-0209-4
SP  - 418
EP  - 425
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Kazari, Masahide
A1  - Okada, Kunio
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haji Ayed, Anis
T1  - Developments of Hydrogen Dry Low Emission Combustion Technology
T2  - Annual Congress of Gas Turbine Society Japan, 2015
Y1  - 2015
N1  - Abstract in engl.; Text in japanisch
ER  - 
TY  - CHAP
A1  - Busse, Daniel
A1  - Esch, Thomas
A1  - Muntaniol, Roman
T1  - Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments
T2  - E-Mobility in Europe : trends and good practice
N2  - The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.
KW  - Carsharing
KW  - Thermal management
KW  - Thermal comfort
KW  - Electrical vehicle
KW  - Passenger compartment
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - https://doi.org/10.1007/978-3-319-13194-8_18
SP  - 327
EP  - 343
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - JOUR
A1  - Grundmann, Jan Thimo
A1  - Dachwald, Bernd
A1  - Grimm, Christian D.
A1  - Kahle, Ralph
A1  - Koch, Aaron Dexter
A1  - Krause, Christian
A1  - Lange, Caroline
A1  - Quantius, Dominik
A1  - Ulamec, Stephan
T1  - Spacecraft for Hypervelocity Impact Research – An Overview of Capabilities, Constraints and the Challenges of Getting There
JF  - Procedia Engineering
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.04.021
SN  - 1877-7058
N1  - Proceedings of the 2015 Hypervelocity Impact Symposium (HVIS 2015)
VL  - Vol. 103
SP  - 151
EP  - 158
PB  - Elsevier
CY  - Amsterdam
ER  -