TY  - CHAP
A1  - Poghossian, Arshak
A1  - Schusser, Sebastian
A1  - Bäcker, M.
A1  - Leinhos, Marcel
A1  - Schöning, Michael Josef
T1  - Real-time in-situ electrical monitoring of the degradation of biopolymers using semiconductor field-effect devices
T2  - Biodegradable biopolymers. Vol. 1
Y1  - 2015
SN  - 978-1-63483-632-6
SP  - 135
EP  - 153
PB  - Nova Science Publ.
CY  - Hauppauge
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Eurlings, Y.
A1  - Grinsven, B. van
A1  - Boyen, H.-G.
A1  - Conings, B.
A1  - Michiels, L.
A1  - Ameloot, M.
A1  - Carleer, R.
A1  - Warmer, J.
A1  - Kaul, P.
A1  - Haenen, K.
A1  - Schöning, Michael Josef
A1  - Ceuninck, W. de
A1  - Wagner, P.
T1  - Heat-transfer based characterization of DNA on synthetic sapphire chips
JF  - Sensors and Actuators B: Chemical
N2  - In this study, we show that synthetic sapphire (Al₂O₃), an established implant material, can also serve as a platform material for biosensors comparable to nanocrystalline diamond. Sapphire chips, beads, and powder were first modified with (3-aminopropyl) triethoxysilane (APTES), followed by succinic anhydride (SA), and finally single-stranded probe DNA was EDC coupled to the functionalized layer. The presence of the APTES-SA layer on sapphire powders was confirmed by thermogravimetric analyis and Fourier-transform infrared spectroscopy. Using planar sapphire chips as substrates and X-ray photoelectron spectroscopy (XPS) as surface-sensitive tool, the sequence of individual layers was analyzed with respect to their chemical state, enabling the quantification of areal densities of the involved molecular units. Fluorescence microscopy was used to demonstrate the hybridization of fluorescently tagged target DNA to the probe DNA, including denaturation- and re-hybridization experiments. Due to its high thermal conductivity, synthetic sapphire is especially suitable as a chip material for the heat-transfer method, which was employed to distinguish complementary- and non-complementary DNA duplexes containing single-nucleotide polymorphisms. These results indicate that it is possible to detect mutations electronically with a chemically resilient and electrically insulating chip material.
Y1  - 2016
U6  - https://doi.org/10.1016/j.snb.2016.02.027
SN  - 0925-4005
VL  - 230
IS  - 230
SP  - 260
EP  - 271
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Light-stimulated hydrogel actuators with incorporated graphene oxide for microfluidic applications
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - https://doi.org/10.5162/12dss2015/P5.8
SP  - 206
EP  - 209
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - https://doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, Maximillian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Monitoring of the Enzymatically Catalyzed Degradation of Biodegradable Polymers by Means of Capacitive Field-Effect Sensors
JF  - Analytical Chemistry
N2  - Designing novel or optimizing existing biodegradable polymers for biomedical applications requires numerous tests on the effect of substances on the degradation process. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) sensors have been applied for monitoring an enzymatically catalyzed degradation of polymers for the first time. The thin films of biodegradable polymer poly(d,l-lactic acid) and enzyme lipase were used as a model system. During degradation, the sensors were read-out by means of impedance spectroscopy. In order to interpret the data obtained from impedance measurements, an electrical equivalent circuit model was developed. In addition, morphological investigations of the polymer surface have been performed by means of in situ atomic force microscopy. The sensor signal change, which reflects the progress of degradation, indicates an accelerated degradation in the presence of the enzyme compared to hydrolysis in neutral pH buffer media. The degradation rate increases with increasing enzyme concentration. The obtained results demonstrate the potential of PMEIS sensors as a very promising tool for in situ and real-time monitoring of degradation of polymers.
Y1  - 2015
U6  - https://doi.org/10.1021/acs.analchem.5b00617
SN  - 1520-6882
VL  - 87
IS  - 13
SP  - 6607
EP  - 6613
PB  - ACS Publications
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Miyamato, Ko-ichiro
A1  - Sakakita, Sakura
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface
JF  - Electrochimica Acta
N2  - The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.
Y1  - 2015
U6  - https://doi.org/10.1016/j.electacta.2015.07.184
SN  - 0013-4686
VL  - 183
SP  - 137
EP  - 142
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Hamad, E. M.
A1  - Bilatto, S. E. R.
A1  - Adly, N. Y.
A1  - Correa, D. S.
A1  - Wolfrum, B.
A1  - Schöning, Michael Josef
A1  - Offenhäusser, A.
A1  - Yakushenko, A.
T1  - Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices
JF  - Lab on a Chip
N2  - Bonding of polymer-based microfluidics to polymer substrates still poses a challenge for Lab-On-a-Chip applications. Especially, when sensing elements are incorporated, patterned deposition of adhesives with curing at ambient conditions is required. Here, we demonstrate a fabrication method for fully printed microfluidic systems with sensing elements using inkjet and stereolithographic 3D-printing.
Y1  - 2016
U6  - https://doi.org/10.1039/C5LC01195G
SN  - 1473-0189
VL  - 16
IS  - 1
SP  - 70
EP  - 74
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Bronder, Thomas
A1  - Wu, Chunsheng
A1  - Schöning, Michael Josef
T1  - Label-free sensing of biomolecules by their intrinsic molecular charge using field-effect devices
T2  - Semiconductor Micro- and Nanoelectonics : Proceedings of the tenth international conference, Yerevan, Armenia, September 11-13
Y1  - 2015
SN  - 978-5-8084-1991-9
SP  - 61
EP  - 63
ER  - 
TY  - JOUR
A1  - Dantism, Shahriar
A1  - Takenaga, Shoko
A1  - Wagner, Patrick
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Determination of the extracellular acidification of Escherichia coli K12 with a multi-​chamber-​based LAPS system
JF  - Physica status solidi (a)
N2  - On-line monitoring of the metabolic activity of microorganisms involved in intermediate stages of biogas production plays an important role to avoid undesirable “down times” during the biogas production. In order to control this process, an on-chip differential measuring system based on the light-addressable potentiometric sensor (LAPS) principle combined with a 3D-printed multi-chamber structure has been realized. As a test microorganism, Escherichia coli K12 (E. coli K12) were used for cell-based measurements. Multi-chamber structures were developed to determine the metabolic activity of E. coli K12 in suspension for a different number of cells, responding to the addition of a constant or variable amount of glucose concentrations, enabling differential and simultaneous measurements.
Y1  - 2016
U6  - https://doi.org/10.1002/pssa.201533043
SN  - 1862-6300
VL  - 213
IS  - 6
SP  - 1479
EP  - 1485
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Strobel, M.
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, R.
A1  - Wagner, Torsten
T1  - Hydrogels with incorporated graphene oxide as light-addressable actuator materials for cell culture environments in lab-on-chip systems
JF  - Physica status solidi (a)
N2  - Abstractauthoren Graphene oxide (GO) nanoparticles were incorporated in temperature-sensitive Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels. The nanoparticles increase the light absorption and convert light energy into heat efficiently. Thus, the hydrogels with GO can be stimulated spatially resolved by illumination as it was demonstrated by IR thermography. The temporal progression of the temperature maximum was detected for different concentrations of GO within the polymer network. Furthermore, the compatibility of PNIPAAm hydrogels with GO and cell cultures was investigated. For this purpose, culture medium was incubated with hydrogels containing GO and the viability and morphology of chinese hamster ovary (CHO) cells was examined after several days of culturing in presence of this medium.
Y1  - 2016
U6  - https://doi.org/10.1002/pssa.201533056
SN  - 1862-6300
VL  - 213
IS  - 6
SP  - 1520
EP  - 1525
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Kasper, Katharina
A1  - Schiffels, Johannes
A1  - Krafft, Simone
A1  - Kuperjans, Isabel
A1  - Elbers, Gereon
A1  - Selmer, Thorsten
T1  - Biogas Production on Demand Regulated by Butyric Acid Addition
T2  - IOP Conference Series: Earth and Environmental Science. Bd. 32
Y1  - 2016
U6  - https://doi.org/10.1088/1755-1315/32/1/012009
SN  - 1755-1315
N1  - ICARET 2016, International Conference on Advances in Renewable Energy and Technologies, Putrajaya, MY, Feb 23-25, 2016
VL  - 32
SP  - 012009/1
EP  - 012009/4
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Koch, Claudia
A1  - Eiben, Sabine
A1  - Geiger, Fania
A1  - Eber, Fabian
A1  - Gliemann, Hartmut
A1  - Poghossian, Arshak
A1  - Wege, Christina
A1  - Schöning, Michael Josef
T1  - Tobacco mosaic virus as enzyme nanocarrier for electrochemical biosensors
JF  - Sensors and Actuators B: Chemical
N2  - The conjunction of (bio-)chemical recognition elements with nanoscale biological building blocks such as virus particles is considered as a very promising strategy for the creation of biohybrids opening novel opportunities for label-free biosensing. This work presents a new approach for the development of biosensors using tobacco mosaic virus (TMV) nanotubes or coat proteins (CPs) as enzyme nanocarriers. Sensor chips combining an array of Pt electrodes loaded with glucose oxidase (GOD)-modified TMV nanotubes or CP aggregates were used for amperometric detection of glucose as a model system for the first time. The presence of TMV nanotubes or CPs on the sensor surface allows binding of a high amount of precisely positioned enzymes without substantial loss of their activity, and may also ensure accessibility of their active centers for analyte molecules. Specific and efficient immobilization of streptavidin-conjugated GOD ([SA]-GOD) complexes on biotinylated TMV nanotubes or CPs was achieved via bioaffinity binding. These layouts were tested in parallel with glucose sensors with adsorptively immobilized [SA]-GOD, as well as [SA]-GOD crosslinked with glutardialdehyde, and came out to exhibit superior sensor performance. The achieved results underline a great potential of an integration of virus/biomolecule hybrids with electronic transducers for future applications in biosensorics and biochips.
Y1  - 2017
U6  - https://doi.org/10.1016/j.snb.2016.07.096
SN  - 0925-4005
VL  - 238
SP  - 716
EP  - 722
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - THES
A1  - Schusser, Sebastian
T1  - Sensor-based degradation monitoring for the evaluation of (bio)degradable polymers
Y1  - 2015
N1  - Universiteit Hasselt, FH Aachen, Dissertation, 2015;

Printausgabe in der Bibliothek vorhanden: 61 UWJ 5
PB  - Universiteit Hasselt ; FH Aachen
CY  - Hasselt ; Aachen
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Vornholt, Wolfgang
A1  - Werner, Frederik
A1  - Yoshinobu, Tatsuo
A1  - Miyamoto, Ko-Ichiro
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Light-addressable potentiometric sensor (LAPS) combined with magnetic beads for pharmaceutical screening
JF  - Physics in medicine
N2  - The light-addressable potentiometric sensor (LAPS) has the unique feature to address different regions of a sensor surface without the need of complex structures. Measurements at different locations on the sensor surface can be performed in a common analyte solution, which distinctly simplifies the fluidic set-up. However, the measurement in a single analyte chamber prevents the application of different drugs or different concentrations of a drug to each measurement spot at the same time as in the case of multi-reservoir-based set-ups. In this work, the authors designed a LAPS-based set-up for cell culture screening that utilises magnetic beads loaded with the endotoxin (lipopolysaccharides, LPS), to generate a spatially distributed gradient of analyte concentration. Different external magnetic fields can be adjusted to move the magnetic beads loaded with a specific drug within the measurement cell. By recording the metabolic activities of a cell layer cultured on top of the LAPS surface, this work shows the possibility to apply different concentrations of a sample along the LAPS measurement spots within a common analyte solution.
Y1  - 2016
U6  - https://doi.org/10.1016/j.phmed.2016.03.001
SN  - 2352-4510
VL  - 2016
IS  - 1
SP  - 2
EP  - 7
ER  - 
TY  - JOUR
A1  - Doll, Theodor
A1  - Wagner, Torsten
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Engineering of functional interfaces / Theodor Doll ; Torsten Wagner ; Patrick Wagner ; Michael J. Schöning (eds.)
JF  - Physica status solidi (a)
Y1  - 2016
U6  - https://doi.org/10.1002/pssa.201670641
SN  - 1862-6319
VL  - 213
IS  - 6
SP  - 1393
EP  - 1394
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Sorich, Maren
A1  - Bartz, Alexander
A1  - Siegert, Petra
A1  - Willenberg, Holger S.
A1  - Lisdat, Fred
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Towards an adrenaline biosensor based on substrate recycling amplification in combination with an enzyme logic gate
JF  - Sensors and Actuators B: Chemical
N2  - An amperometric biosensor using a substrate recycling principle was realized for the detection of low adrenaline concentrations (1 nM) by measurements in phosphate buffer and Ringer’s solution at pH 6.5 and pH 7.4, respectively. In proof-of-concept experiments, a Boolean logic-gate principle has been applied to develop a digital adrenaline biosensor based on an enzyme AND logic gate. The obtained results demonstrate that the developed digital biosensor is capable for a rapid qualitative determination of the presence/absence of adrenaline in a YES/NO statement. Such digital biosensor could be used in clinical diagnostics for the control of a correct insertion of a catheter in the adrenal veins during adrenal venous-sampling procedure.
Y1  - 2016
U6  - https://doi.org/10.1016/j.snb.2016.06.064
SN  - 0925-4005
VL  - 237
SP  - 190
EP  - 195
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-Ichiro
A1  - Sato, Takuya
A1  - Abe, Minami
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Light-addressable potentiometric sensor as a sensing element in plug-based microfluidic devices
JF  - Micromachines
N2  - A plug-based microfluidic system based on the principle of the light-addressable potentiometric sensor (LAPS) is proposed. The LAPS is a semiconductor-based chemical sensor, which has a free addressability of the measurement point on the sensing surface. By combining a microfluidic device and LAPS, ion sensing can be performed anywhere inside the microfluidic channel. In this study, the sample solution to be measured was introduced into the channel in a form of a plug with a volume in the range of microliters. Taking advantage of the light-addressability, the position of the plug could be monitored and pneumatically controlled. With the developed system, the pH value of a plug with a volume down to 400 nL could be measured. As an example of plug-based operation, two plugs were merged in the channel, and the pH change was detected by differential measurement.
KW  - light-addressable potentiometric sensor
KW  - plug-based microfluidic device
KW  - chemical sensor
Y1  - 2016
U6  - https://doi.org/10.3390/mi7070111
SN  - 2072-666X
N1  - This article belongs to the Special Issue "Micro/Nano Devices for Chemical Analysis"
VL  - 7
IS  - 7
SP  - 111
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Hardt, G.
A1  - Käver, L.
A1  - Willenberg, H.S.
A1  - Kröger, J.-C.
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Chip-based biosensor for the detection of low adrenaline concentrations to support adrenal venous sampling
JF  - Sensor and Actuators B: Chemical
N2  - A chip-based amperometric biosensor referring on using the bioelectrocatalytical amplification principle for the detection of low adrenaline concentrations is presented. The adrenaline biosensor has been prepared by modification of a platinum thin-film electrode with an enzyme membrane containing the pyrroloquinoline quinone-dependent glucose dehydrogenase and glutaraldehyde. Measuring conditions such as temperature, pH value, and glucose concentration have been optimized to achieve a high sensitivity and a low detection limit of about 1 nM adrenaline measured in phosphate buffer at neutral pH value. The response of the biosensor to different catecholamines has also been proven. Long-term stability of the adrenaline biosensor has been studied over 10 days. In addition, the biosensor has been successfully applied for adrenaline detection in human blood plasma for future biomedical applications. Furthermore, preliminary experiments have been carried to detect the adrenaline-concentration difference measured in peripheral blood and adrenal venous blood, representing the adrenal vein sampling procedure of a physician.
Y1  - 2018
U6  - https://doi.org/10.1016/j.snb.2018.05.136
SN  - 0925-4005
VL  - 272
SP  - 21
EP  - 27
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Welden, Rene
A1  - Scheja, Sabrina
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
A1  - Wagner, Torsten
T1  - Electrochemical Evaluation of Light‐Addressable Electrodes Based on TiO2 for the Integration in Lab‐on‐Chip Systems
JF  - physica status solidi a : applications and materials sciences
N2  - In lab-on-chip systems, electrodes are important for the manipulation (e.g., cell stimulation, electrolysis) within such systems. An alternative to commonly used electrode structures can be a light-addressable electrode. Here, due to the photoelectric effect, the conducting area can be adjusted by modification of the illumination area which enables a flexible control of the electrode. In this work, titanium dioxide based light-addressable electrodes are fabricated by a sol–gel technique and a spin-coating process, to deposit a thin film on a fluorine-doped tin oxide glass. To characterize the fabricated electrodes, the thickness, and morphological structure are measured by a profilometer and a scanning electron microscope. For the electrochemical behavior, the dark current and the photocurrent are determined for various film thicknesses. For the spatial resolution behavior, the dependency of the photocurrent while changing the area of the illuminated area is studied. Furthermore, the addressing of single fluid compartments in a three-chamber system, which is added to the electrode, is demonstrated.
Y1  - 2018
U6  - https://doi.org/10.1002/pssa.201800150
SN  - 1862-6319
VL  - 215
IS  - 15
SP  - Article number 1800150
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Koch, Claudia
A1  - Poghossian, Arshak
A1  - Wege, Christina
A1  - Schöning, Michael Josef
ED  - Wege, Christina
T1  - TMV-Based Adapter Templates for Enhanced Enzyme Loading in Biosensor Applications
T2  - Virus-Derived Nanoparticles for Advanced Technologies
N2  - Nanotubular tobacco mosaic virus (TMV) particles and RNA-free lower-order coat protein (CP) aggregates have been employed as enzyme carriers in different diagnostic layouts and compared for their influence on biosensor performance. In the following, we describe a label-free electrochemical biosensor for improved glucose detection by use of TMV adapters and the enzyme glucose oxidase (GOD). A specific and efficient immobilization of streptavidin-conjugated GOD ([SA]-GOD) complexes on biotinylated TMV nanotubes or CP aggregates was achieved via bioaffinity binding. Glucose sensors with adsorptively immobilized [SA]-GOD, and with [SA]-GOD cross-linked with glutardialdehyde, respectively, were tested in parallel on the same sensor chip. Comparison of these sensors revealed that TMV adapters enhanced the amperometric glucose detection remarkably, conveying highest sensitivity, an extended linear detection range and fastest response times. These results underline a great potential of an integration of virus/biomolecule hybrids with electronic transducers for applications in biosensorics and biochips. Here, we describe the fabrication and use of amperometric sensor chips combining an array of circular Pt electrodes, their loading with GOD-modified TMV nanotubes (and other GOD immobilization methods), and the subsequent investigations of the sensor performance.
KW  - Tobacco mosaic virus (TMV)
KW  - Coat protein
KW  - Enzyme nanocarrier
KW  - Glucose biosensor
KW  - Glucose oxidase
Y1  - 2018
SN  - 978-1-4939-7808-3
U6  - https://doi.org/10.1007/978-1-4939-7808-3
N1  - Methods in Molecular Biology, vol 1776
SP  - 553
EP  - 568
PB  - Humana Press
CY  - New York, NY
ER  -