TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Schmidt, Frank-Michael
A1  - Hötter, Jan-Steffen
A1  - Sokalla, Wolfgang
A1  - Sokalla, Patrick
T1  - Additive manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry
JF  - Physics Procedia
N2  - Additive Manufacturing of metal parts by Selective Laser Melting has become a powerful tool for the direct manufacturing of complex parts mainly for the aerospace and medical industry. With the introduction of its desktop machine, Realizer targeted the dental market. The contribution describes the special features of the machine, discusses details of the process and shows manufacturing results focused on metal dental devices.
KW  - scan strategy
KW  - dental bridges
KW  - cobald chrome
KW  - Selective Laser Melting (SLM)
KW  - additive manufacturing
Y1  - 2010
U6  - https://doi.org/10.1016/j.phpro.2010.08.082
SN  - 1875-3892
N1  - Laser Assisted Net Shape Engineering 6, Proceedings of the LANE 2010, Part 2
VL  - 5 B
IS  - 2
SP  - 543
EP  - 549
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Oberländer, Jan
A1  - Friedrich, Peter
A1  - Rysstad, Gunnar
A1  - Berger, Jörg
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Realization of a calorimetric gas sensor on polyimide foil for applications in aseptic food industry
JF  - Procedia Engineering
N2  - A calorimetric gas sensor is presented for the monitoring of gas-phase H2O2 at elevated temperature during sterilization processes in aseptic food industry. The sensor consists of two temperature-sensitive thin-film resistances built up on a polyimide foil with a thickness of 25 μm, which are passivated with a layer of SU-8 photo resist and catalytically activated with manganese(IV) oxide. Instead of an active heating structure, the calorimetric sensor utilizes the elevated temperature of an evaporated H2O2 aerosol. In an experimental set-up, the sensor has shown a sensitivity of 4.78 °C/(%v/v) in a H2O2 concentration range of 0 to 10% v/v at an evaporation temperature of 240 ∘C. Furthermore, the sensor possesses the same, unchanged sensor signal even at varied evaporation temperatures of the gas stream. The sensor characterization demonstrates the suitability of the calorimetric gas sensor for monitoring the efficiency of sterilization processes.
Y1  - 2010
U6  - https://doi.org/10.1016/j.proeng.2010.09.098
SN  - 1877-7058
N1  - Eurosensor XXIV Conference, 5-8 September 2010, Linz, Austria
VL  - 5
SP  - 264
EP  - 267
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bohrn, Ulrich
A1  - Stütz, Evamaria
A1  - Fleischer, Maximilian
A1  - Schöning, Michael Josef
T1  - Real-time detection of CO by eukaryotic cells
JF  - Procedia Engineering
N2  - In this contribution, we focus on the detection of toxic gases with living eukaryotic cells. A cell-based gas sensor system, able to measure the effects of direct exposure of gases to cells in real-time, was set up. Impedance data as well as oxygen consumption of Chinese hamster lung fibroblast cells (V79) were analysed upon exposure to carbon monoxide (CO). The CO (diluted in wet synthetic air) affects the cell respiration as indicated by an attenuated respiration signal after the CO exposure as well as an instant increase of the capacitive part of the impedance signal during the gas exposure.
Y1  - 2010
SN  - 1877-7058
N1  - Eurosensor XXIV Conference, 5-8 September 2010, Linz, Austria
VL  - 5
SP  - 17
EP  - 20
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Scholl, Ingrid
A1  - Bartella, Alexander K.
A1  - Moluluo, Cem
A1  - Ertural, Berat
A1  - Laing, Frederic
A1  - Suder, Sebastian
T1  - MedicVR : Acceleration and Enhancement Techniques for Direct Volume Rendering in Virtual Reality
T2  - Bildverarbeitung für die Medizin 2019 : Algorithmen – Systeme – Anwendungen
Y1  - 2019
SN  - 978-3-658-25326-4
U6  - https://doi.org/10.1007/978-3-658-25326-4_32
SP  - 152
EP  - 157
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Baroud, Gamal
A1  - Falk, R.
A1  - Crookshank, M.
T1  - Experimental and theoretical investigation of directional permeability of human vertebral cancellous bone for cement infiltration. G. Baroud, R. Falk, M. Crookshank, S. Sponagel, T. Steffen
JF  - Journal of Biomechanics. 37 (2004), H. 2
Y1  - 2004
SN  - 0021-9290
SP  - 189
EP  - 196
ER  - 
TY  - JOUR
A1  - Bode, Jürgen
A1  - Bartsch, Jörg W.
A1  - Boulikas, Toulikas
A1  - Iber, Michaela
A1  - Mielke, Christian
A1  - Schübeler, Dirk
A1  - Seibler, Jost
A1  - Benham, Craig
T1  - Transcription-promoting genomic sites in mammalia: their elucidation and architectural principles
JF  - Gene therapy & molecular biology
Y1  - 1998
SN  - 1529-9120
VL  - 1
IS  - 1
SP  - 1
EP  - 29
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Borchers, Kai
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Koch, Aaron D.
A1  - Lange, Caroline
A1  - Maiwald, Volker
A1  - Meß, Jan-Gerd
A1  - Mikulz, Eugen
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Sasaki, Kaname
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Sznajder, Maciej
A1  - Toth, Norbert
A1  - Ceriotti, Matteo
A1  - McInnes, Colin
A1  - Peloni, Alessandro
A1  - Biele, Jens
A1  - Krause, Christian
A1  - Dachwald, Bernd
A1  - Hercik, David
A1  - Lichtenheldt, Roy
A1  - Wolff, Friederike
A1  - Koncz, Alexander
A1  - Pelivan, Ivanka
A1  - Schmitz, Nicole
A1  - Boden, Ralf
A1  - Riemann, Johannes
A1  - Seboldt, Wolfgang
A1  - Wejmo, Elisabet
A1  - Ziach, Christian
A1  - Mikschl, Tobias
A1  - Montenegro, Sergio
A1  - Ruffer, Michael
A1  - Cordero, Federico
A1  - Tardivel, Simon
T1  - Solar sails for planetary defense & high-energy missions
T2  - IEEE Aerospace Conference Proceedings
N2  - 20 years after the successful ground deployment test of a (20 m) 2 solar sail at DLR Cologne, and in the light of the upcoming U.S. NEAscout mission, we provide an overview of the progress made since in our mission and hardware design studies as well as the hardware built in the course of our solar sail technology development. We outline the most likely and most efficient routes to develop solar sails for useful missions in science and applications, based on our developed `now-term' and near-term hardware as well as the many practical and managerial lessons learned from the DLR-ESTEC Gossamer Roadmap. Mission types directly applicable to planetary defense include single and Multiple NEA Rendezvous ((M)NR) for precursor, monitoring and follow-up scenarios as well as sail-propelled head-on retrograde kinetic impactors (RKI) for mitigation. Other mission types such as the Displaced L1 (DL1) space weather advance warning and monitoring or Solar Polar Orbiter (SPO) types demonstrate the capability of near-term solar sails to achieve asteroid rendezvous in any kind of orbit, from Earth-coorbital to extremely inclined and even retrograde orbits. Some of these mission types such as SPO, (M)NR and RKI include separable payloads. For one-way access to the asteroid surface, nanolanders like MASCOT are an ideal match for solar sails in micro-spacecraft format, i.e. in launch configurations compatible with ESPA and ASAP secondary payload platforms. Larger landers similar to the JAXA-DLR study of a Jupiter Trojan asteroid lander for the OKEANOS mission can shuttle from the sail to the asteroids visited and enable multiple NEA sample-return missions. The high impact velocities and re-try capability achieved by the RKI mission type on a final orbit identical to the target asteroid's but retrograde to its motion enables small spacecraft size impactors to carry sufficient kinetic energy for deflection.
Y1  - 2019
U6  - https://doi.org/10.1109/AERO.2019.8741900
N1  - AERO 2019; Big Sky; United States; 2 March 2019 through 9 March 2019
SP  - 1
EP  - 21
ER  - 
TY  - JOUR
A1  - Spelthahn, Heiko
A1  - Schaffrath, Sophie
A1  - Coppe, Thomas
A1  - Rufi, Frederic
A1  - Schöning, Michael Josef
T1  - Development of an electrolyte-insulator-semiconductor (EIS) based capacitive heavy metal sensor for the detection of Pb2+ und Cd2+ ions
JF  - Physica status solidi (a) : applications and material science
N2  - Chalcogenide glass materials as membranes for potentiometric sensors for chemical analysis in solutions have been studied since more than 20 years. In this work, an electrolyte–insulator–semiconductor structure was combined with chalcogenide glass membranes prepared by means of the pulsed laser deposition technique. Depending on the membrane composition a selectivity to different ions (Cd2+ and Pb2+) is achieved. The different sensor membranes have been physically characterised using microscopy, ellipsometry, profilometry, atomic force microscopy (AFM), scanning electron microscopy (SEM) and Rutherford backscattering spectrometry (RBS). The electrochemical behaviour has been investigated via capacitance/voltage (C/V) and constant capacitance (ConCap) measurements and results in a Cd2+ sensitivity of 23.1 ± 0.6 mV per decade in a linear range from 7 × 10−6 to 10−2 mol/l and 24.4 ± 0.5 mV per decade in a linear range from 5 × 10−6 to 10−2 mol/l for Pb2+, respectively.
Y1  - 2010
U6  - https://doi.org/10.1002/pssa.200983306
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
VL  - 207
IS  - 4
SP  - 930
EP  - 934
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Digel, Ilya
A1  - Wehlitz, V.
A1  - Kayser, Peter
A1  - Figiel-Lange, A.
A1  - Bassam, Rasha
A1  - Rundstedt, F. von
T1  - Suspension depletion approach for exemption of infected Solanum jasminoides cells from pospiviroids
JF  - Plant Pathology
N2  - Despite numerous studies, viroid elimination from infected plants remains a very challenging task. This study introduces for the first time a novel ‘suspension depletion’ approach for exemption of Solanum jasminoides plants from viroids. The proposed method implies initial establishment of suspension cultures of the infected plant cells. The suspended cells were then physically treated (mild thermotherapy, 33 °C), which presumably delayed the replication of the viroid. The viroid concentration in the treated biomass was monitored weekly using pospiviroid-specific PCR. After 10–12 weeks of continuous treatment, a sufficient decrease in viroid concentration was observed such that the infection became undetectable by PCR. The treated single cells then gave rise to microcolonies on a solid culture medium and the obtained viroid-negative clones were further promoted to regenerate into viroid-free plants. Three years of accumulated experimental data suggests feasibility, broad applicability, and good efficacy of the proposed approach.
Y1  - 2018
U6  - https://doi.org/10.1111/ppa.12750
SN  - 1365-3059
VL  - 67
IS  - 2
SP  - 358
EP  - 365
PB  - Wiley
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Baroud, Gamal
A1  - Topcu, M.
A1  - Sponagel, Stefan
T1  - Soft Materials in Technology and Biology – Characteristics, Properties, and Parameter Identification
JF  - Bioengineering in Cell and Tissue Research / Artmann, Gerhard M. ; Chien, Shu (Eds.)
Y1  - 2008
SN  - 978-3-540-75408-4
SP  - 253
EP  - 315
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Temiz Artmann, Aysegül
A1  - Başkurt, Oǧuz Kerim
A1  - Pekcetin, C.
A1  - Kandemir, F.
T1  - Leukocyte activation, oxidant stress and red blood cell properties after acute, exhausting exercise in rats. Temiz, A.; Baskurt, O. K., Pekcetin, C.; Kandemir, F.; Güre, A.
JF  - Clinical Hemorheology and Microcirculation. 22 (2000), H. 4
Y1  - 2000
SN  - 1386-0291
SP  - 253
EP  - 259
ER  - 
TY  - JOUR
A1  - Temiz Artmann, Aysegül
A1  - Yalcin, Ozlem
A1  - Resmi, Halil
A1  - Başkurt, Oǧuz Kerim
T1  - Can white blood cell activation be one of the major factors that affect hemorheological parameters during and after exercise?
JF  - Clinical Hemorheology and Microcirculation. 26 (2002), H. 3
Y1  - 2002
SN  - 1386-0291
N1  - = The 11th European Symposium on Clinical Hemorheology, Rouen, France, 19-22 September 2000
SP  - 189
EP  - 193
ER  - 
TY  - JOUR
A1  - Gerhards, Michael
A1  - Belloum, Adam
A1  - Berretz, Frank
A1  - Sander, Volker
A1  - Skorupa, Sascha
T1  - A history-tracing XML-based provenance framework for workflows
JF  - The 5th Workshop on Workflows in Support of Large-Scale Science
N2  - The importance of validating and reproducing the outcome of computational processes is fundamental to many application domains. Assuring the provenance of workflows will likely become even more important with respect to the incorporation of human tasks to standard workflows by emerging standards such as WS-HumanTask. This paper addresses this trend by an actor-based workflow approach that actively support provenance. It proposes a framework to track and store provenance information automatically that applies for various workflow management systems. In particular, the introduced provenance framework supports the documentation of workflows in a legally binding way. The authors therefore use the concept of layered XML documents, i.e. history-tracing XML. Furthermore, the proposed provenance framework enables the executors (actors) of a particular workflow task to attest their operations and the associated results by integrating digital XML signatures.
KW  - workflow
KW  - provenance
KW  - framework
KW  - containers
KW  - humans
KW  - synchronization
KW  - libraries
KW  - history
KW  - concrete
KW  - XML
Y1  - 2010
SN  - 978-1-4244-8989-3
U6  - https://doi.org/10.1109/WORKS.2010.5671873
N1  - The 5th Workshop on Workflows in Support of Large-Scale Science, 14 Nov. 2010, New Orleans, USA
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Kern, Alexander
A1  - Frentzel, Ralf
A1  - Behrens, Jörg
T1  - Simulation of the transient voltages in the auxiliary power network of a large power plant in case of a direct lightning strike to the high-voltage overhead transmission line
N2  - Large power plants can be endangered by lightning strikes with possible consequences regarding their safety and availability. A special scenario is a lightning strike to the HV overhead transmission line close to the power plant's connection to the power grid. If then additionally a so-called shielding failure of the overhead ground wire on top of the overhead transmission line is assumed, i.e. the lightning strikes directly into a phase conductor, this is an extreme electromagnetic disturbance. The paper deals with the numerical simulation of such a lightning strike and the consequences on the components of the power plant's auxiliary power network connected to different voltage levels.
KW  - power generation
KW  - surges
KW  - conductors
KW  - arresters
KW  - power transmission lines
KW  - lightning
Y1  - 2010
SN  - 978-88-905519-0-1
U6  - https://doi.org/10.1109/ICLP.2010.7845756
N1  - 2010 30th International Conference on Lightning Protection (ICLP), 13-17 Sept. 2010, Cagliari, Italy
SP  - 749-1
EP  - 749-7
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Bouquegneau, Christian
A1  - Kern, Alexander
A1  - Rousseau, Alain
T1  - Lightning safety guidelines
N2  - This paper introduces lightning to the layman, noting the right behaviour in front of thunderstorms as well as protective measures against lightning. It also contributes to the prevention of lightning injuries and damages. This report was prepared by the authors inside the AHG1 Group for IEC TC81 (Lightning Protection).
Y1  - 2010
N1  - Ground´2010 & 4th LPE, International Conference on Grounding and Earthing & 4th International Conference on Lightning Physics and Effects, Salvador - Brazil, November, 2010
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Baroud, Gamal
A1  - Falk, R.
A1  - Crookshank, M.
T1  - Corrigendum to “Experimental and theoretical investigation of directional permeability of human vertebral cancellous bone for cement infiltration”. Baroud, G.; Falk, R.; Crookshank, M.; Sponagel, S.; Steffen, T.
JF  - Journal of Biomechanics. 37 (2004), H. 2
Y1  - 2004
SN  - 0021-9290
SP  - 1802
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Arent, Jan-Christoph
A1  - Steffen, Lucas
A1  - Balvers, Johannes Mattheus
A1  - Duhovic, Miro
T1  - Thermal optimization of composite autoclave molds using the shift factor approach for boundary condition estimation
JF  - Journal of Composite Materials
Y1  - 2017
U6  - https://doi.org/10.1177/0021998317699868
SN  - 1530-793X
VL  - 51
IS  - 12
SP  - 1753
EP  - 1767
PB  - Sage
CY  - London
ER  - 
TY  - JOUR
A1  - Kern, Alexander
A1  - Klöters, Georg
A1  - Pferdemenges, Jörg
T1  - Optimised protection against lightning for the signalling and safety systems of level crossings on non-electrified railway lines
JF  - RTR : European Rail Technology Review
Y1  - 2010
SN  - 0079-9548
VL  - 50
IS  - 2
PB  - DVV Media Group
CY  - Hamburg
ER  - 
TY  - JOUR
A1  - Temiz Artmann, Aysegül
A1  - Başkurt, Oǧuz Kerim
A1  - Edremitlioglu, M.
T1  - In vitro effects of in vivo activated leukocytes on red blood cell filterability and lipid peroxidation. Baskurt, O.K.; Edremitlioglu, M.; Temiz, A.
JF  - Clinical Hemorheology. 14 (1994), H. 4
Y1  - 1994
SP  - 591
EP  - 596
ER  - 
TY  - JOUR
A1  - Sponagel, Stefan
A1  - Baroud, Gamal
A1  - Steffen, T.
A1  - Wu, J.
T1  - Parameter identification for cement infiltration of osteoporotic bone
JF  - Poromechanics II : Proceedings of the Second Biot Conference on Poromechanics Grenoble, France 26 - 28 August 2002 / ed. by J.-L. Auriault ...
Y1  - 2002
SN  - 90-5809-394-8
SP  - 55
EP  - 58
PB  - Balkema
CY  - Lisse [u.a.]
ER  -