TY  - CHAP
A1  - Ayed, Anis Haj
A1  - Striegan, Constantin J. D.
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Kazari, M.
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
T1  - Automated design space exploration of the hydrogen fueled "Micromix" combustor technology
N2  - Combined with the use of renewable energy sources for
its production, Hydrogen represents a possible alternative gas
turbine fuel for future low emission power generation. Due to
its different physical properties compared to other fuels such
as natural gas, well established gas turbine combustion
systems cannot be directly applied for Dry Low NOx (DLN)
Hydrogen combustion. This makes the development of new
combustion technologies an essential and challenging task
for the future of hydrogen fueled gas turbines.
The newly developed and successfully tested “DLN
Micromix” combustion technology offers a great potential to
burn hydrogen in gas turbines at very low NOx emissions.
Aiming to further develop an existing burner design in terms
of increased energy density, a redesign is required in order to
stabilise the flames at higher mass flows and to maintain low
emission levels.
For this purpose, a systematic design exploration has
been carried out with the support of CFD and optimisation
tools to identify the interactions of geometrical and design
parameters on the combustor performance. Aerodynamic
effects as well as flame and emission formation are observed
and understood time- and cost-efficiently. Correlations
between single geometric values, the pressure drop of the
burner and NOx production have been identified as a result.
This numeric methodology helps to reduce the effort of
manufacturing and testing to few designs for single
validation campaigns, in order to confirm the flame stability
and NOx emissions in a wider operating condition field.
Y1  - 2017
N1  - Proceedings of the 1st Global Power and Propulsion Forum
GPPF 2017, Jan 16-18, 2017, Zurich, Switzerland
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Azar, Fouad
A1  - Digel, Ilya
ED  - Staat, Manfred
ED  - Erni, Daniel
T1  - Utilization of fluorescence spectroscopy and neural networks in clinical analysis
T2  - 3rd YRA MedTech Symposium 2019 : May 24 / 2019 / FH Aachen
N2  - Fluorescence topography of human urine in combination with learning algorithms can provide a variant pattern recognition method in analytical clinical chemistry and, eventually, diagnosis.
Y1  - 2019
SN  - 978-3-940402-22-6
U6  - https://doi.org/10.17185/duepublico/48750
SP  - 40
EP  - 41
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Baader, Fabian
A1  - Keller, Denis
A1  - Lehmann, Raphael
A1  - Gerber, Lukas
A1  - Reiswich, Martin
A1  - Dachwald, Bernd
A1  - Förstner, Roger
T1  - Operating melting probes for ice penetration under sublimation  conditions and in reduced gravity on a sounding rocket
T2  - Proceedings of the 24th ESA Symposium on European Rocket and Balloon Programmes and related Research
Y1  - 2019
SN  - 0379-6566
N1  - 24th PAC Symposium 2019
ER  - 
TY  - CHAP
A1  - Baader, Fabian
A1  - Reiswich, M.
A1  - Bartsch, M.
A1  - Keller, D.
A1  - Tiede, E.
A1  - Keck, G.
A1  - Demircian, A.
A1  - Friedrich, M.
A1  - Dachwald, Bernd
A1  - Schüller, K.
A1  - Lehmann, R.
A1  - Chojetzki, R.
A1  - Durand, C.
A1  - Rapp, L.
A1  - Kowalski, Julia
A1  - Förstner, R.
T1  - VIPER - Student research on extraterrestrical ice penetration technology
T2  - Proceedings of the 2nd Symposium on Space Educational Activities
N2  - Recent analysis of scientific data from Cassini and earth-based observations gave evidence for a global ocean under a surrounding solid ice shell on Saturn's moon Enceladus. Images of Enceladus' South Pole showed several fissures in the ice shell with plumes constantly exhausting frozen water particles, building up the E-Ring, one of the outer rings of Saturn. In this southern region of Enceladus, the ice shell is considered to be as thin as 2 km, about an order of magnitude thinner than on the rest of the moon. Under the ice shell, there is a global ocean consisting of liquid water. Scientists are discussing different approaches the possibilities of taking samples of water, i.e. by melting through the ice using a melting probe. FH Aachen UAS developed a prototype of maneuverable melting probe which can navigate through the ice that has already been tested successfully in a terrestrial environment. This means no atmosphere and or ambient pressure, low ice temperatures of around 100 to 150K (near the South Pole) and a very low gravity of 0,114 m/s^2 or 1100 μg. Two of these influencing measures are about to be investigated at FH Aachen UAS in 2017, low ice temperature and low ambient pressure below the triple point of water. Low gravity cannot be easily simulated inside a large experiment chamber, though. Numerical simulations of the melting process at RWTH Aachen however are showing a gravity dependence of melting behavior. Considering this aspect, VIPER provides a link between large-scale experimental simulations at FH Aachen UAS and numerical simulations at RWTH Aachen. To analyze the melting process, about 90 seconds of experiment time in reduced gravity and low ambient pressure is provided by the REXUS rocket. In this time frame, the melting speed and contact force between ice and probes are measured, as well as heating power and a two-dimensional array of ice temperatures. Additionally, visual and infrared cameras are used to observe the melting process.
Y1  - 2018
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Backes, Klaus
A1  - Faber, Christian
A1  - Hafner, Bernd
A1  - Schwarzer, Klemens
T1  - Parameteridentifikation an thermischen Speichern
T2  - 8. Symposium Thermische Solarenergie : Ort: Bildungszentrum der Hanns-Seidel-Stiftung, Kloster Banz, Staffelstein. Termin: 13. - 15. Mai 1998 / OTTI, Technologie-Kolleg
Y1  - 1998
SP  - 293
EP  - 297
PB  - OTTI
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Bagheri, Mohsen
A1  - Schleupen, Josef
A1  - Dahmann, Peter
A1  - Kallweit, Stephan
T1  - A multi-functional device applying for the safe maintenance at high-altitude on wind turbines
T2  - 20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Bagheri, Mohsen
A1  - Schleupen, Josef
A1  - Dahmann, Peter
A1  - Kallweit, Stephan
T1  - Kletternde Wartungsplattform für die wetterunabhängige Instandhaltung von Rotorblättern an Windenergieanlagen - SMART
T2  - AKIDA 2016  Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung (AKIDA) am 15. und 16.11.2016, Technologiezentrum Aachen
N2  - In Deutschland liegt der Anteil der Windkraft an der Gesamtstromerzeugung bei 13,3% mit mehr als 25.000 installierten Windenergieanlagen (WEA). Weltweit erfährt die Windbranche ein rasantes Wachstum. Indien und China berichten eine jährliche Wachstumsrate an Neuinstallationen von 45%. Die Technologie zur Erzeugung elektrischer Energie aus Windkraft ist noch vergleichsweise jung. Durch die weltweit steigende Anzahl an Windenergieanlagen wächst zunehmend der Bedarf an innovativen Wartungslösungen. Komponenten wie Generator oder Getriebe sind inzwischen weitestgehend ausgereift. Der Fokus richtet sich zunehmend auf die wesentliche Kernkomponente - die Rotorblätter.
Industriekletterer inspizieren die Rotorblätter oder Türme i.d.R.
in einem zwei Jahres Rhythmus. Sie werden zunehmend durch Seilarbeitsbühnen unterstützt. Für größere Reparaturen kommen Kräne zum Einsatz, mit denen das Rotorblatt für die Instandhaltung demontiert wird. Die Standardinspektion besteht aus Sicht- und Klopfprüfung der Rotorblattoberfläche und ist nur bei sehr ruhiger Wetterlage durchführbar. Seit September 2014 wird das Forschungsprojekt SMART (Scanning, Monitoring, Analysis, Repair and Transportation), Entwicklung einer Wartungsplattform für WEA, vom BMWi gefördert. Das Konsortium besteht aus zwei Firmen und der
Fachhochschule Aachen. Die SMART-Anlage klettert reibschlüssig am Turm der WEA mittels speziellen Kettenfahrwerken (Abbildung) auf- und abwärts. Ein ringförmiges Spannsystems, basierend auf dem Konzept der „Nürnberger“-Schere, erzeugt die erforderliche Anpresskraft für den Kletterprozess. Wettergeschützte Arbeitskabinen ermöglichen die ganzjährige Instandhaltung von Rotorblättern und ebenso Türmen. Dadurch können Wartungsarbeiten auf 24 Stunden am Tag ausgeweitet werden. Der kombinierte Einsatz (Sensorfusion) bildgebender Messtechnik wie Thermografie, Ultraschall, und  Terahertz in der Arbeitskabine kann die Dokumentation, Effizienz und Qualität der Instandhaltungsarbeiten erheblich verbessern. Langfristiges Ziel von SMART ist ein Condition Monitoring für Rotorblätter und Türme auf Basis digitalisierter dreidimensionaler Volumenscans. Der kooperative Einsatz mit UAVs erweitert die Instandhaltungsstrategie. UAVs ermöglichen die schnelle, kostengünstige globale optische Inspektion von Rotorblattoberflächen zur Detektion potentieller Fehlstellen. Der „Proof-of-Concept“ Meilenstein wurde mit der Demonstration eines funktionsfähigen Modells im Dezember 2015 erfolgreich abgeschlossen.
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Balaskas, Georgios
A1  - Hoffmeister, Benno
A1  - Butenweg, Christoph
A1  - Pilz, Marco
A1  - Bauer, Anna
ED  - Papadrakakis, Manolis
ED  - Fragiadakis, Michalis
T1  - Earthquake early warning and response system based on intelligent seismic and monitoring sensors embedded in a communication platform and coupled with BIM models
T2  - Proceedings of COMPDYN 2021
N2  - This paper describes the concept of an innovative, interdisciplinary, user-oriented earthquake warning and rapid response system coupled with a structural health monitoring system (SHM), capable to detect structural damages in real time. The novel system is based on interconnected decentralized seismic and structural health monitoring sensors. It is developed and will be exemplarily applied on critical infrastructures in Lower Rhine Region, in particular on a road bridge and within a chemical industrial facility. A communication network is responsible to exchange information between sensors and forward warnings and status reports about infrastructures’health condition to the concerned recipients (e.g., facility operators, local authorities). Safety measures such as emergency shutdowns are activated to mitigate structural damages and damage propagation. Local monitoring systems of the infrastructures are integrated in BIM models. The visualization of sensor data and the graphic representation of the detected damages provide spatial content to sensors data and serve as a useful and effective tool for the decision-making processes after an earthquake in the region under consideration.
KW  - early warning and response system
KW  - interconnected sensor systems
KW  - seismic structural damage detection via SHM
KW  - integration SHM in BIM
Y1  - 2021
SN  - 978-618-85072-5-8
U6  - https://doi.org/10.7712/120121.8539.18855
SN  - 2623-3347
N1  - COMPDYN 2021, 28-30 June 2021, Streamed from Athens, Greece, 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering
SP  - 987
EP  - 998
PB  - National Technical University of Athens
CY  - Athen
ER  - 
TY  - CHAP
A1  - Ballmann, J.
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
T1  - High stress intensities in focussing zones of waves
N2  - The propagation of mechanical waves in plates of isotropic elastic material is investigated. After a short introduction to the understanding of focussing of stress waves in a plate with a curved boundary the method of characteristics is applied to a plate of hyperelastic material. Using this method the propagation of acceleration waves is discussed. Based on this a numerical difference scheme is developed for solving initial-boundary-value problems and applied to two examples: propagation of a point disturbance in a homogeneously finitely strained non-linear elastic plate and geometrical focussing in al linear elastic plate.
KW  - Technische Mechanik
KW  - Wellen
KW  - mechanical waves
Y1  - 1985
U6  - https://doi.org/10.1016/B978-0-444-42520-1.50015-3
ER  - 
TY  - CHAP
A1  - Ballmann, Josef
A1  - Dafnis, Athanasios
A1  - Braun, Carsten
A1  - Korsch, Helge
A1  - Reimerdes, Hans-Günther
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - The HIRENASD project: High Reynolds number aerostructural dynamics experiments in the European Transonic Wind Tunnel (ETW)
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-5.11.2
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Barek, Jiri
A1  - Fischer, Jan
A1  - Navratil, Tomas
A1  - Peckova, Karolina
A1  - Yosypchuk, Bogdan
T1  - Silver solid amalgam electrodes as sensors for chemical carcinogens
N2  - The applicability of differential pulse voltammetry (DPV) and adsorptive stripping voltammetry (AdSV) at a non-toxic meniscus-modified silver solid amalgam electrode (m-AgSAE) for the determination of trace amounts of genotoxic substances was demonstrated on the determination of micromolar and submicromolar concentrations of 3-nitrofluoranthene using methanol - 0.01 mol L-1 NaOH (9:1) mixture as a base electrolyte and of Ostazine Orange using 0.01 mol L-1 NaOH as a base electrolyte.
KW  - Biosensor
KW  - Solid amalgam electrodes
KW  - voltammetry
KW  - carcinogens
KW  - 3-nitrofluoranthene
KW  - Ostazine Orange
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1554
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Billerbeck, Katrin
T1  - Hochschuldidaktisches Qualitätsmanagement - Ideen für die Ermöglichung guter Lehre
T2  - Professionalisierung der Hochschuldidaktik: [42. Jahrestagung der Gesellschaft für Hochschuldidaktik im März 2013 an der Hochschule Magdeburg-Stendal]
Y1  - 2016
SN  - 978-3-7639-5533-6
N1  - Blickpunkt Hochschuldidaktik ; 127 : Tagung
SP  - 261
EP  - 269
PB  - Bertelsmann
CY  - Bielefeld
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Bosse, Elke
T1  - The challenge of creating meta-inferences: Combining data representing institutional and individual perspectives on first-year support in higher education
T2  - 9th Conference on Social Science Methodology of the International Sociological Association, Leicester, UK
Y1  - 2016
N1  - RC33 Conference 2016
SP  - 1
EP  - 20
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Bosse, Elke
A1  - Mergner, Julia
A1  - Jänsch, Vanessa
T1  - Entwicklung studienrelevanter Kompetenzen im Zusammenspiel mit Studieneinstiegsangeboten
T2  - KoBF-Auswertungsworkshop 31.05.-01.06.2017
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Knutzen, S.
ED  - Mai, Andreas
T1  - Erfolgsstrategien für organisationales Lernen
T2  - Hochschulwege 2015 : Wie verändern Projekte die Hochschulen? ; Dokumentation der Tagung in Weimar im März 2015
Y1  - 2017
SN  - 978-3-7439-1763-7
SP  - 91
EP  - 108
PB  - tredition
CY  - Hamburg
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Mergner, Julia
T1  - Forschungsbasierte Qualitätsentwicklung am Beispiel der Analyse von Lernprozessen und der Wirksamkeit von Förderprogrammen
T2  - 3. Internationale Tagung für Qualitätsmanagement und Qualitätsentwicklung im Hochschulbereich 2.-3. Februar 2017
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Baronas, Romas
A1  - Ivanauskas, Feliksas
A1  - Kulys, Juozas
T1  - Mathematical modeling of biosensors based on an array of enzyme microreactors
N2  - This paper presents a two-dimensional-in-space mathematical model of biosensors based on an array of enzyme microreactors immobilised on a single electrode. The modeling system acts under amperometric conditions. The microreactors were modeled by particles and by strips. The model is based on the diffusion equations containing a nonlinear term related to the Michaelis-Menten kinetics of the enzymatic reaction. The model involves three regions: an array of enzyme microreactors where enzyme reaction as well as mass transport by diffusion takes place, a diffusion limiting region where only the diffusion takes place, and a convective region, where the analyte concentration is maintained constant. Using computer simulation, the influence of the geometry of the microreactors and of the diffusion region on the biosensor response was investigated. The digital simulation was carried out using the finite difference technique.
KW  - Biosensor
KW  - Reaction-diffusion
KW  - modeling biosensor
KW  - microreactor
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1569
ER  - 
TY  - CHAP
A1  - Bassam, Rasha
A1  - Digel, Ilya
A1  - Artmann, Gerhard
T1  - Effect of nitric oxide on protein thermal stability : [abstract]
N2  - As a deduction from these results, we can conclude that proteins mainly in vitro, denaturate totally at a temperature between 57°C -62°C, and they also affected by NO and different ions types. In which mainly, NO cause earlier protein denaturation, which means that, NO has a destabilizing effect on proteins, and also different ions will alter the protein denaturation in which, some ions will cause earlier protein denaturation while others not.
KW  - Stickstoffmonoxid
KW  - Proteine
KW  - Hämoglobin
KW  - nitric oxide gas
KW  - protein
KW  - hemoglobin
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Baumann, Marcus
ED  - Hempel, G.
T1  - Primary production and phytoplankton growth in the marginal ice zone of the Fram Strait and the interpretation of the field data with autecological experiments (Abstract)
T2  - Oceanography and biology of Arctic seas : selected papers from the ICES Symposium on Marine Sciences of the Arctic and Subarctic Regions, held in Santander, 28 - 30 September 1987. (Rapports et procès-verbaux des réunions / Conseil International pour l'Exploration de la Mer ; 188)
Y1  - 1989
SP  - 128
PB  - International Council for the Exploration of the Sea
CY  - Copenhagen
ER  - 
TY  - CHAP
A1  - Baumann, T.
A1  - Teixeira Boura, Cristiano José
A1  - Göttsche, Joachim
A1  - Hoffschmidt, Bernhard
A1  - O'Connell, B.
A1  - Schmitz, S.
A1  - Zunft, S.
T1  - Air/Sand heat exchanger design and materials for solar thermal power plant applications
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 146
EP  - 147
PB  - Soc. OSC
CY  - Saint Maur
ER  -