TY  - CHAP
A1  - Pham, Phu Tinh
A1  - Nguyen, Thanh Ngoc
A1  - Staat, Manfred
T1  - FEM based shakedown analysis of hardening structures
T2  - Proceedings International Conference on Advances in Computational Mechanics (ACOME)
Y1  - 2012
N1  - International Conference on Advances in Computational Mechanics (ACOME), August 14-16, 2012, Ho Chi Minh City, Vietnam
SP  - 870
EP  - 882
ER  - 
TY  - THES
A1  - Pham, Phu Tinh
T1  - Upper bound limit and shakedown analysis of elastic-plastic bounded linearly kinematic hardening structures
Y1  - 2011
N1  - Aachen, Techn. Hochsch., Diss., 2011
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Peters, H.
A1  - Ziemons, Karl
A1  - Dammers, J.
A1  - Müller-Veggian, Mattea
ED  - Nenonen, Jukka
T1  - Continuous head motion detection during MEG measurement using head location coils
T2  - Proceedings of the 12th International Conference on Biomagnetism : August 13 - 17, 2000, Helsinki University of Technology, Espoo, Finland
Y1  - 2001
SN  - 951-22-5401-8
N1  - Biomag <12, 2000, Espoo> ; Teknillinen Korkeakoulu <Helsinki> ; International Conference on Biomagnetism <12, 2000, Espoo>
PB  - Helsinki Univ. of Technology, Laboratory of Biomedical Engineering
CY  - Espoo
ER  - 
TY  - JOUR
A1  - Pawelke, Siegfried
A1  - Schmitt, W.
A1  - Meissen, Th.
T1  - Aachen 3D finger. 3D digitizer for application in dentistry / Schmitt, W. ; Pawelke, S. ; Meissen, Th.
JF  - Biomedizinische Technik. 35 (1990), H. 4
Y1  - 1990
SN  - 0013-5585
SP  - 69
EP  - 71
ER  - 
TY  - JOUR
A1  - Pawelke, Siegfried
A1  - Butzer, Paul L.
T1  - Semi-groups and resolvent operators
JF  - Archive for Rational Mechanics and Analysis
KW  - Resolvent Operator
KW  - Electromagnetism
KW  - Complex System
KW  - Neural Network
KW  - Nonlinear Dynamics
Y1  - 1968
U6  - http://dx.doi.org/10.1007/BF00250941
SN  - 0003-9527
VL  - 30
IS  - 2
SP  - 127
EP  - 147
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Pawelke, Siegfried
T1  - Weak smoothness conditions for the uniform convergence of Fourier-Jacobi series
JF  - Functiones et Approximatio. Commentarii Mathematici. 9 (1980)
Y1  - 1980
SN  - 0208-6573
N1  - Zentralblatt MATH:  http://www.emis.de/MATH-item?0471.42018
SP  - 9
EP  - 13
ER  - 
TY  - JOUR
A1  - Pawelke, Siegfried
T1  - Note on Jackson and Bernstein type approximation theorems in the case of approximation by algebraic polynomial in the spaces L and C
JF  - Studia Scientiarum Mathematicarum Hungarica. 36 (2000), H. 3-4
Y1  - 2000
SN  - 0081-6906
SP  - 353
EP  - 358
ER  - 
TY  - JOUR
A1  - Parl, C.
A1  - Larue, H.
A1  - Streun, M.
A1  - Ziemons, Karl
T1  - Double-side-readout technique for SiPM-matrices
JF  - 2010 IEEE Nuclear Science Symposium Conference Record (NSS/MIC)
N2  - In our case the double-side-method is used to minimize the complexity of a matrix-readout. Here the number of channels is reduced to 2√N̅. It is also possible to benefit from the method in a single pixel readout system. One signal can be used to measure position and energy of the event, the other one can be applied to a fast trigger-circuit at the same time. In a next step we will investigate timing behavior and electrical crosstalk of the circuit.
Y1  - 2011
SN  - 1095-7863
SP  - 1486
EP  - 1487
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Paczkowski, Sebastian
A1  - Weißbecker, Bernhard
A1  - Schöning, Michael Josef
A1  - Schütz, Stefan
T1  - Biosensors on the Basis of Insect Olfaction
JF  - Insect biotechnology / Andreas Vilcinskas, ed.
Y1  - 2011
SN  - 978-90-481-9640-1
N1  - Biologically-inspired system ; 2
SP  - 225
EP  - 240
PB  - Springer
CY  - Dordrecht [u.a.]
ER  - 
TY  - CHAP
A1  - Osterhage, Hannes
A1  - Bialonski, Stephan
A1  - Staniek, Matthäus
A1  - Schindler, Kaspar
A1  - Wagner, Tobias
A1  - Elger, Christian E.
A1  - Lehnertz, Klaus
T1  - Bivariate and multivariate time series analysis techniques and their potential impact for seizure prediction
T2  - Seizure Prediction in Epilepsy: From Basic Mechanisms to Clinical Applications
Y1  - 2008
SN  - 978-3-527-62519-2
U6  - http://dx.doi.org/10.1002/9783527625192.ch15
SP  - 189
EP  - 208
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Olderog, M.
A1  - Mohr, P.
A1  - Beging, Stefan
A1  - Tsoumpas, C.
A1  - Ziemons, Karl
T1  - Simulation study on the role of tissue-scattered events in improving sensitivity for a compact time of flight compton positron emission tomograph
T2  - 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC)
N2  - In positron emission tomography improving time, energy and spatial detector resolutions and using Compton kinematics introduces the possibility to reconstruct a radioactivity distribution image from scatter coincidences, thereby enhancing image quality. The number of single scattered coincidences alone is in the same order of magnitude as true coincidences. In this work, a compact Compton camera module based on monolithic scintillation material is investigated as a detector ring module. The detector interactions are simulated with Monte Carlo package GATE. The scattering angle inside the tissue is derived from the energy of the scattered photon, which results in a set of possible scattering trajectories or broken line of response. The Compton kinematics collimation reduces the number of solutions. Additionally, the time of flight information helps localize the position of the annihilation. One of the questions of this investigation is related to how the energy, spatial and temporal resolutions help confine the possible annihilation volume. A comparison of currently technically feasible detector resolutions (under laboratory conditions) demonstrates the influence on this annihilation volume and shows that energy and coincidence time resolution have a significant impact. An enhancement of the latter from 400 ps to 100 ps leads to a smaller annihilation volume of around 50%, while a change of the energy resolution in the absorber layer from 12% to 4.5% results in a reduction of 60%. The inclusion of single tissue-scattered data has the potential to increase the sensitivity of a scanner by a factor of 2 to 3 times. The concept can be further optimized and extended for multiple scatter coincidences and subsequently validated by a reconstruction algorithm.
Y1  - 2021
SN  - 978-1-7281-7693-2
U6  - http://dx.doi.org/10.1109/NSS/MIC42677.2020.9507901
N1  - 2020 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), 31 Oct.-7 Nov. 2020, Boston, MA, USA
PB  - IEEE
ER  - 
TY  - THES
A1  - Oflaz, Hakan
T1  - Entwicklung eines Prototypen zur Prognose von Frühgeburten : ein biomedizintechnischer Ansatz
Y1  - 2012
U6  - http://dx.doi.org/10.4126/38m-004639208
N1  - Köln, Univ., Diss., 2012
PB  - Deutsche Zentralbibliothek für Medizin
CY  - Köln
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Mayer, Marlena
A1  - Greeff, Anton
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Spore-based biosensor to monitor the microbicidal efficacy of gaseous hydrogen peroxide sterilization processes
JF  - Biosensors and Bioelectronics
N2  - In this work, a spore-based biosensor is evaluated to monitor the microbicidal efficacy of sterilization processes applying gaseous hydrogen peroxide (H2O2). The sensor is based on interdigitated electrode structures (IDEs) that have been fabricated by means of thin-film technologies. Impedimetric measurements are applied to study the effect of sterilization process on spores of Bacillus atrophaeus. This resilient microorganism is commonly used in industry to proof the sterilization efficiency. The sensor measurements are accompanied by conventional microbiological challenge tests, as well as morphological characterizations with scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The sensor measurements are correlated with the microbiological test routines. In both methods, namely the sensor-based and microbiological one, a tailing effect has been observed. The results are evaluated and discussed in a three-dimensional calibration plot demonstrating the sensor's suitability to enable a rapid process decision in terms of a successfully performed sterilization.
Y1  - 2018
U6  - http://dx.doi.org/10.1016/j.bios.2017.12.045
SN  - 0956-5663
VL  - 104
SP  - 87
EP  - 94
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Strategies in developing thin-film sensors for monitoring aseptic food processes : Theoretical considerations and investigations of passivation materials
JF  - Electrochimica Acta
N2  - The sterilization of packages in aseptic food processes is highly significant to maintain a consumer-safe product with extended shelf-life. Today, the sterilization of food packages is predominantly accomplished by gaseous hydrogen peroxide (H2O2) in combination with heat. In order to monitor this sterilization process, calorimetric gas sensors as differential set-up of two platinum temperature sensors representing a catalytically active (additionally deposition of MnO2) and a passive segment have been recently developed. The temperature rise of the exothermic decomposition serves as an indicator of the present H2O2 concentration. In the present work, a theoretical approach considering the sensor’s thermochemistry and physical transport phenomena was formulated to evaluate the temperature rise based on the energy content of gaseous H2O2. In a further part of this work, three polymers have been analyzed with respect to their application as passivation materials. The examined polymers are photoresist SU-8, perfluoroalkoxy (PFA) and fluorinated ethylene propylene (FEP). Thermal analyses by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) have been conducted to determine the operation limits of the polymers. The overall chemical resistance and stability of the polymers against the harsh environmental conditions during the sterilization process have been examined by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR).
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.electacta.2015.06.126
SN  - 0013-4686
VL  - 183
SP  - 130
EP  - 136
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Flexible polyimide-based calorimetric gas sensors for monitoring hy-drogen peroxide in sterilisation processes of aseptic filling machines
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Boyen, Hans-Gerd
A1  - Schöning, Michael Josef
T1  - Detection of hydrogen peroxide vapor by use of manganese(IV) oxide as catalyst for calorimetric gas sensors
JF  - Physica status solidi A: Applications and materials science
N2  - In this work, the catalyst manganese(IV) oxide (MnO2), of calorimetric gas sensors (to monitor the sterilization agent vaporized hydrogen peroxide) has been investigated in more detail. Chemical analyses by means of X-ray-induced photoelectron spectroscopy have been performed to unravel the surface chemistry prior and after exposure to hydrogen peroxide vapor at elevated temperature, as applied in the sterilization processes of beverage cartons. The surface characterization reveals a change in oxidation states of the metal oxide catalyst after exposure to hydrogen peroxide. Additionally, a cleaning effect of the catalyst, which itself is attached to the sensor surface by means of a polymer interlayer, could be observed.
Y1  - 2014
U6  - http://dx.doi.org/10.1002/pssa.201330359
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1372
EP  - 1376
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Study of Interdigitated Electrode Arrays Using Experiments and Finite Element Models for the Evaluation of Sterilization Processes
JF  - Sensors
N2  - In this work, a sensor to evaluate sterilization processes with hydrogen peroxide vapor has been characterized. Experimental, analytical and numerical methods were applied to evaluate and study the sensor behavior. The sensor set-up is based on planar interdigitated electrodes. The interdigitated electrode structure consists of 614 electrode fingers spanning over a total sensing area of 20 mm2. Sensor measurements were conducted with and without microbiological spores as well as after an industrial sterilization protocol. The measurements were verified using an analytical expression based on a first-order elliptical integral. A model based on the finite element method with periodic boundary conditions in two dimensions was developed and utilized to validate the experimental findings.
Y1  - 2015
U6  - http://dx.doi.org/10.3390/s151026115
SN  - 1424-8220
N1  - This article belongs to the Special Issue "Gas Sensors—Designs and Applications"
VL  - 15
IS  - 10
SP  - 26115
EP  - 26127
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Bromm, Alexander
A1  - Wendeler, Luisa
A1  - Iken, Heiko
A1  - Palomar Duran, Marlena
A1  - Greeff, Anton
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Towards a biosensor to monitor the sterilisation efficiency of aseptic filling machines
JF  - Physica status solidi (a)
N2  - Sterilisation processes are compulsory in medicine, pharmacy, and food industries to prevent infections of consumers and microbiological contaminations of products. Monitoring the sterilisation by conventional microbiological methods is time- and lab-consuming. To overcome this problem, in this work a novel biosensor has been proposed. The sensor enables a fast method to evaluate sterilisation processes. By means of thin-film technology the sensor's transducer structures in form of IDEs (interdigitated electrodes) have been fabricated on a silicon substrate. Physical characterisation of the developed sensor was done by AFM, SEM, and profilometry. Impedance analyses were conducted for the electrical characterisation. As microbiological layer spores of B. atrophaeus have been immobilised on the sensing structure; spores of this type are a well-known sterilisation test organism. Impedance measurements at a fixed frequency over time were performed to monitor the immobilisation process. A sterilisation process according to aseptic filling machines was applied to demonstrate the sensor functionality. After both, immobilisation and sterilisation, a change in impedance could successfully be detected.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431900
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1299
EP  - 1305
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Arreola, Julio
A1  - Hansen, Christina
A1  - Greeff, Anton
A1  - Mayer, Marlena
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Impedimetric Biosensor to Enable Fast Evaluation of Gaseous Sterilization Processes
T2  - MDPI Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.3390/proceedings1040435
N1  - Eurosensors 2017 Conference, Paris, France, 3–6 September 2017
VL  - 1
IS  - 4
ER  -