TY  - CHAP
A1  - Tomić, Igor
A1  - Penna, Andrea
A1  - DeJong, Matthew
A1  - Butenweg, Christoph
A1  - Correia, António A.
A1  - Candeias, Paulo X.
A1  - Senaldi, Ilaria
A1  - Guerrini, Gabriele
A1  - Malomo, Daniele
A1  - Beyer, Katrin
T1  - Seismic testing of adjacent interacting masonry structures
T2  - 12th International Conference on Structural Analysis of Historical Constructions (SAHC 2020)
N2  - In many historical centres in Europe, stone masonry buildings are part of building aggregates, which developed when the layout of the city or village was densified. In these aggregates, adjacent buildings share structural walls to support floors and roofs. Meanwhile, the masonry walls of the façades of adjacent buildings are often connected by dry joints since adjacent buildings were constructed at different times. Observations after for example the recent Central Italy earthquakes showed that the dry joints between the building units were often the first elements to be damaged. As a result, the joints opened up leading to pounding between the building units and a complicated interaction at floor and roof beam supports. The analysis of such building aggregates is very challenging and modelling guidelines do not exist. Advances in the development of analysis methods have been impeded by the lack of experimental data on the seismic response of such aggregates. The objective of the project AIMS (Seismic Testing of Adjacent Interacting Masonry Structures), included in the H2020 project SERA, is to provide such experimental data by testing an aggregate of two buildings under two horizontal components of dynamic
excitation. The test unit is built at half-scale, with a two-storey building and a one-storey building. The buildings share one common wall while the façade walls are connected by dry joints. The floors are at different heights leading to a complex dynamic response of this smallest possible building aggregate. The shake table test is conducted at the LNEC seismic testing facility. The testing sequence comprises four levels of shaking: 25%, 50%, 75% and 100% of nominal shaking table capacity. Extensive instrumentation, including accelerometers, displacement transducers and optical measurement systems, provides detailed information on the building aggregate response. Special attention is paid to the interface opening, the globa
KW  - Historical centres
KW  - Stone masonry
KW  - Adjacent buildings
KW  - Shake table test
Y1  - 2020
U6  - http://dx.doi.org/10.23967/sahc.2021.234
N1  - Wednesday, 16 September, 2020 to Friday, 18 September, 2020, Barcelona.
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tomic, Igor
A1  - Penna, Andrea
A1  - DeJong, Matthew
A1  - Butenweg, Christoph
A1  - Senaldi, Ilaria
A1  - Guerrini, Gabriele
A1  - Malomo, Daniele
A1  - Beyer, Katrin
T1  - Blind predictions of shake table testing of aggregate masonry buildings
T2  - 17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021.
N2  - In many historical centers in Europe, stone masonry is part of building aggregates, which developed when the layout of the city or village was densified. The analysis of such building aggregates is very challenging and modelling guidelines missing. Advances in the development of analysis methods have been impeded by the lack of experimental data on the seismic response of such aggregates. The SERA project AIMS (Seismic Testing of Adjacent Interacting Masonry Structures) provides such experimental data by testing an aggregate of two buildings under two horizontal components of dynamic excitation. With the aim to advance the modelling of unreinforced masonry aggregates, a blind prediction competition is organized before the experimental campaign. Each group has been provided a complete set of construction drawings, material properties, testing sequence and the list of measurements to be reported. The applied modelling approaches span from equivalent frame models to Finite Element models using shell elements and discrete element models with solid elements. This paper compares the first entries, regarding the modelling approaches, results in terms of base shear, roof displacements, interface openings, and the failure modes.
KW  - Historical centres
KW  - Stone masonry
KW  - Adjacent buildings
KW  - Shake table test
KW  - Blind prediction competition
Y1  - 2020
N1  - Die Konferenz war ursprünglich für den 13-18 September 2020 angesetzt.
ER  - 
TY  - CHAP
A1  - Tischbein, Franziska
A1  - Kean, Kilian
A1  - Vertgewall, Chris Martin
A1  - Ulbig, Andreas
A1  - Altherr, Lena
T1  - Determination of the topology of low-voltage distribution grids using cluster methods
T2  - 27th International Conference on Electricity Distribution (CIRED 2023)
N2  - Due to the decarbonization of the energy sector, the electric distribution grids are undergoing a major transformation, which is expected to increase the load on the operating resources due to new electrical loads and distributed energy resources. Therefore, grid operators need to gradually move to active grid management in order to ensure safe and reliable grid operation. However, this requires knowledge of key grid variables, such as node voltages, which is why the mass integration of measurement technology (smart meters) is necessary. Another problem is the fact that a large part of the topology of the distribution grids is not sufficiently digitized and models are partly faulty, which means that active grid operation management today has to be carried out largely blindly. It is therefore part of current research to develop methods for determining unknown grid topologies based on measurement data. In this paper, different clustering algorithms are presented and their performance of topology detection of low voltage grids is compared. Furthermore, the influence of measurement uncertainties is investigated in the form of a sensitivity analysis.
Y1  - 2023
SN  - 978-1-83953-855-1
U6  - http://dx.doi.org/10.1049/icp.2023.0478
N1  - 27th International Conference on Electricity Distribution (CIRED 2023), 12-15 June 2023, Rome, Italy.
SP  - 1
EP  - 5
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Tippkötter, Nils
A1  - Stückmann, H.
A1  - Winkelmann, G.
A1  - Noack, U.
A1  - Beutel, S.
A1  - Scheper, T.
A1  - Ulber, R.
T1  - Optimisation of antibody-labelling of gold colloids for their application in an immunchromatographic assay for microcystin-LR
T2  - European BioPerspectives : celebrating the 25th DECHEMA annual convention of biotechnologists ; 30 May - 1 June 2007, Cologne, Germany ; book of abstracts ; abstracts, poster programme
Y1  - 2007
SP  - 126
PB  - Dechema
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Tippkötter, Nils
A1  - Roikaew, W.
A1  - Ulber, R.
T1  - An automated pilot plant for the bioengineering processing of concentrated whey
T2  - European BioPerspectives : in cooperation with BIOTECHNICA 2008 : 7 - 9 October 2008 Hannover, Germany ; book of abstracts ; abstracts, poster programme
Y1  - 2008
SP  - 98
PB  - Dechema
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Thurn, Laura
A1  - Gebhardt, Andreas
T1  - Arousing Enthusiasm for STEM: Teaching 3D Printing Technology
T2  - Conference Proceedings: New Perspectives in Science Education
Y1  - 2017
SN  - 978-88-6292-847-2
SP  - 87
EP  - 92
PB  - liberiauniversitaria.it
CY  - Padua
ER  - 
TY  - CHAP
A1  - Thurn, Laura
A1  - Gebhardt, Andreas
T1  - Strategy of Education on Materials for Students
T2  - Conference Proceedings: „New Perspectives in Science Education"
Y1  - 2018
SN  - 978-88-6292-976-9
SP  - 156
EP  - 161
CY  - Florence, Italy
ER  - 
TY  - CHAP
A1  - Thurn, Laura
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Kessler, Julia
T1  - Education packed in technology to promote innovations: Teaching Additive Manufacturing based on a rolling Lab
T2  - Modern Technologies in Manufacturing (MTeM 2017 - AMaTUC)
Y1  - 2017
U6  - http://dx.doi.org/10.1051/matecconf/201713702013
SN  - 2261-236X
N1  - MATEC Web Conf.
Volume 137, 2017
Matec Web of Conferences., 137(2017)02013
ER  - 
TY  - CHAP
A1  - Thoma, Andreas
A1  - Stiemer, Luc
A1  - Braun, Carsten
A1  - Fisher, Alex
A1  - Gardi, Alessandro G.
T1  - Potential of hybrid neural network local path planner for small UAV in urban environments
T2  - AIAA SCITECH 2023 Forum
N2  - This work proposes a hybrid algorithm combining an Artificial Neural Network (ANN) with a conventional local path planner to navigate UAVs efficiently in various unknown urban environments. The proposed method of a Hybrid Artificial Neural Network Avoidance System is called HANNAS. The ANN analyses a video stream and classifies the current environment. This information about the current Environment is used to set several control parameters of a conventional local path planner, the 3DVFH*. The local path planner then plans the path toward a specific goal point based on distance data from a depth camera. We trained and tested a state-of-the-art image segmentation algorithm, PP-LiteSeg. The proposed HANNAS method reaches a failure probability of 17%, which is less than half the failure probability of the baseline and around half the failure probability of an improved, bio-inspired version of the 3DVFH*. The proposed HANNAS method does not show any disadvantages regarding flight time or flight distance.
Y1  - 2023
U6  - http://dx.doi.org/10.2514/6.2023-2359
N1  - AIAA SCITECH 2023 Forum, 23-27 January 2023, National Harbor, MD & Online
PB  - AIAA
ER  - 
TY  - CHAP
A1  - Thoma, Andreas
A1  - Fisher, Alex
A1  - Braun, Carsten
T1  - Improving the px4 avoid algorithm by bio-inspired flight strategies
T2  - DLRK2020 - „Luft- und Raumfahrt – Verantwortung in allen Dimensionen“
Y1  - 2020
N1  - Deutscher Luft- und Raumfahrtkongress 2020, 1. bis 3. September 2020 – Online, „Luft- und Raumfahrt – Verantwortung in allen Dimensionen“
ER  - 
TY  - CHAP
A1  - Thoma, Andreas
A1  - Fisher, Alex
A1  - Bertrand, Olivier
A1  - Braun, Carsten
ED  - Vouloutsi, Vasiliki
ED  - Mura, Anna
ED  - Tauber, Falk
ED  - Speck, Thomas
ED  - Prescott, Tony J.
ED  - Verschure, Paul F. M. J.
T1  - Evaluation of possible flight strategies for close object evasion from bumblebee experiments
T2  - Living Machines 2020: Biomimetic and Biohybrid Systems
KW  - Obstacle avoidance
KW  - Bumblebees
KW  - Flight control
KW  - UAV
KW  - MAV
Y1  - 2020
SN  - 978-3-030-64312-6
U6  - http://dx.doi.org/10.1007/978-3-030-64313-3_34
N1  - 9th International Conference, Living Machines 2020, Freiburg, Germany, July 28–30, 2020, Proceedings
SP  - 354
EP  - 365
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Thenent, N. E.
A1  - Dahmann, Peter
T1  - Increasing aircraft design flexibility ‐ The development of a hydrostatic transmission for gliders with self‐launching capability
T2  - Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband
Y1  - 2011
SN  - 978-3-9321-8274-7
SP  - 865
EP  - 883
PB  - Dt. Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Thenent, N. E.
A1  - Dahmann, Peter
T1  - Hydrostatic propeller drive
T2  - Proceedings of the conference : 18 - 20 May, 2011 Tampere, Finland / the Twelth Scandinavian International Conference on Fluid Power, SICFP'11. Ed.: Harri Sairiala ... Vol. 1
Y1  - 2011
SN  - 978-952-15-2517-9
SP  - 217
EP  - 227
CY  - Tampere
ER  - 
TY  - CHAP
A1  - Tewari, Udit
A1  - Neshvad, Surena
A1  - Goldbach, Daniel
A1  - Sachau, Jürgen
T1  - Verification and Implementation of Pseudo-Random-Binary-Sequences for Online Determination of Grid Impedance Spectrum
T2  - International Conference on Renewable Energies and Power Quality (ICREPQ´15), La Conuna, Spain, 25th to 27th March, 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Terstegge, Andreas
A1  - Weber, S.
A1  - Herzog, H.
A1  - Müller-Gärtner, H. W.
A1  - Halling, H.
T1  - Design and implementation aspects of a 3D reconstruction algorithm for the Jülich TierPET system
T2  - 1997 International Meeting on Fully ThreeDimensional Image Reconstruction in Radiology and Nuclear Medicine : 3D97
Y1  - 1997
SP  - 170
EP  - 173
ER  - 
TY  - CHAP
A1  - Tepecik, Atakan
ED  - Digel, Ilya
ED  - Staat, Manfred
ED  - Trzewik, Jürgen
ED  - Sielemann, Stefanie
ED  - Erni, Daniel
ED  - Zylka, Waldemar
T1  - AstroBioLab: Review of technical and bioanalytical approaches
T2  - 4th YRA MedTech Symposium 2024 : February 1 / 2024 / FH Aachen
N2  - This study presents the concept of AstroBioLab, an autonomous astrobiological field laboratory tailored for the exploration of (sub)glacial habitats. AstroBioLab is an integral component of the TRIPLE (Technologies for Rapid Ice Penetration and subglacial Lake Exploration) DLR-funded project, aimed at advancing astrobiology research through the development and deployment of innovative technologies. AstroBioLab integrates diverse measurement techniques such as fluorescence microscopy, DNA sequencing and fluorescence spectrometry, while leveraging microfluidics for efficient sample delivery and preparation.
Y1  - 2024
SN  - 978-3-940402-65-3
U6  - http://dx.doi.org/10.17185/duepublico/81475
SP  - 33
EP  - 34
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Teixeira Boura, Cristiano José
A1  - Niederwestberg, Stefan
A1  - McLeod, Jacqueline
A1  - Herrmann, Ulf
A1  - Hoffschmidt, Bernhard
T1  - Development of heat exchanger for high temperature energy storage with bulk materials
T2  - AIP Conference Proceedings
Y1  - 2016
U6  - http://dx.doi.org/10.1063/1.4949106
VL  - 1734
IS  - 1
SP  - 050008-1
EP  - 050008-7
ER  - 
TY  - CHAP
A1  - Teixeira Boura, Cristiano José
A1  - Eckstein, J.
A1  - Felinks, J.
A1  - Göttsche, Joachim
A1  - Hoffschmidt, Bernhard
A1  - Schmitz, S.
T1  - 3-D CFD simulation of an air-sand heat exchanger
T2  - SolarPACES 2011 : concentrating solar power and chemical energy systems : 20 - 23 September, 2011, Granada, Spain
Y1  - 2011
CY  - Granada
ER  - 
TY  - CHAP
A1  - Tamaldin, Noreffendy
A1  - Mansor, Muhd Rizuan
A1  - Mat Yamin, Ahmad Kamal
A1  - Bin Abdollah, Mohd Fazli
A1  - Esch, Thomas
A1  - Tonoli, Andrea
A1  - Reisinger, Karl Heinz
A1  - Sprenger, Hanna
A1  - Razuli, Hisham
ED  - Bin Abdollah, Mohd Fadzli
ED  - Amiruddin, Hilmi
ED  - Singh, Amrik Singh Phuman
ED  - Munir, Fudhail Abdul
ED  - Ibrahim, Asriana
T1  - Development of UTeM United Future Fuel Design Training Center Under Erasmus+ United Program
T2  - Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia
N2  - The industrial revolution IR4.0 era have driven many states of the art technologies to be introduced especially in the automotive industry. The rapid development of automotive industries in Europe have created wide industry gap between European Union (EU) and developing countries such as in South-East Asia (SEA). Indulging this situation, FH Joanneum, Austria together with European partners from FH Aachen, Germany and Politecnico Di Torino, Italy is taking initiative to close the gap utilizing the Erasmus+ United grant from EU. A consortium was founded to engage with automotive technology transfer using the European  ramework to Malaysian, Indonesian and Thailand Higher Education Institutions (HEI) as well as automotive industries. This could be achieved by establishing Engineering Knowledge Transfer Unit (EKTU) in respective SEA institutions guided by the industry partners in their respective countries. This EKTU could offer updated, innovative, and high-quality training courses to increase graduate’s employability in higher education institutions and strengthen relations between HEI and the wider economic and social environment by addressing Universityindustry cooperation which is the regional priority for Asia. It is expected that, the Capacity Building Initiative would improve the quality of higher education and enhancing its relevance for the labor market and society in the SEA partners. The outcome of this project would greatly benefit the partners in strong and complementary partnership targeting the automotive industry and enhanced larger scale international cooperation between the European and SEA partners. It would also prepare the SEA HEI in sustainable partnership with Automotive industry in the region as a mean of income generation in the future.
KW  - Erasmus+ United
KW  - technology transfer
KW  - UTeM Engineering Knowledge Transfer Unit
KW  - Malaysian automotive industry
Y1  - 2022
SN  - 978-981-19-3178-9
SN  - 978-981-19-3179-6 (E-Book)
U6  - http://dx.doi.org/10.1007/978-981-19-3179-6_50
SN  - 2195-4356
N1  - The 7th International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2021) was organized by Universiti Teknikal Malaysia Melaka (UTeM), Malaysia, in association with the Universitas Sebelas Maret (UNS), Indonesia, on 23 November 2021.
SP  - 274
EP  - 278
PB  - Springer Nature
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Tamaldin, Noreffendy
A1  - Esch, Thomas
A1  - Tonoli, Andrea
A1  - Reisinger, Karl Heinz
A1  - Sprenger, Hanna
A1  - Razuli, Hisham
T1  - ERASMUS+ United CBHE Automotive International Collaboration from European to South East Asia
T2  - Proceedings of the 2nd African International Conference on Industrial Engineering and Operations Management
N2  - The industrial revolution especially in the IR4.0 era have driven many states of the art technologies to be introduced.
The automotive industry as well as many other key industries have also been greatly influenced. The rapid development of automotive industries in Europe have created wide industry gap between European Union (EU) and developing countries such as in South East Asia (SEA). Indulging this situation, FH JOANNEUM, Austria together with European partners from FH Aachen, Germany and Politecnico di Torino, Italy are taking initiative to close down the gap utilizing the Erasmus+ United Capacity Building in Higher Education grant from EU. A consortium was founded to engage with automotive technology transfer using the European framework to Malaysian, Indonesian and Thailand Higher Education Institutions (HEI) as well as automotive industries in respective countries. This could be achieved by establishing Engineering Knowledge Transfer Unit (EKTU) in respective SEA institutions guided by the industry partners in their respective countries. This EKTU could offer updated, innovative and high-quality training courses to increase graduate’s employability in higher education institutions and strengthen relations between HEI and the wider economic and social environment by addressing University-industry cooperation which is the regional priority for Asia. It is expected that, the Capacity Building Initiative would improve the quality of higher education and enhancing its relevance for the labor market and society in the SEA partners. The outcome of this project would greatly benefit the partners in strong and complementary partnership targeting the automotive industry and enhanced larger scale international cooperation between the European and SEA partners. It would also prepare the SEA HEI in sustainable partnership with Automotive industry in the region as a mean of income generation in the future.
KW  - European Framework and South East Asia
KW  - Technology Transfer
KW  - Capacity Building Higher Education
KW  - Malaysian Automotive Industry
Y1  - 2020
SN  - 978-1-7923-6123-4
SN  - 2169-8767
N1  - 2nd African International Conference on Industrial Engineering and Operations Management; Harare, Zimbabwe, December 7-10, 2020
SP  - 2970
EP  - 2972
PB  - IEOM Society International
CY  - Southfield
ER  -