TY  - CHAP
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Flexible polyimide-based calorimetric gas sensors for monitoring hy-drogen peroxide in sterilisation processes of aseptic filling machines
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Boyen, Hans-Gerd
A1  - Schöning, Michael Josef
T1  - Detection of hydrogen peroxide vapor by use of manganese(IV) oxide as catalyst for calorimetric gas sensors
JF  - Physica status solidi A: Applications and materials science
N2  - In this work, the catalyst manganese(IV) oxide (MnO2), of calorimetric gas sensors (to monitor the sterilization agent vaporized hydrogen peroxide) has been investigated in more detail. Chemical analyses by means of X-ray-induced photoelectron spectroscopy have been performed to unravel the surface chemistry prior and after exposure to hydrogen peroxide vapor at elevated temperature, as applied in the sterilization processes of beverage cartons. The surface characterization reveals a change in oxidation states of the metal oxide catalyst after exposure to hydrogen peroxide. Additionally, a cleaning effect of the catalyst, which itself is attached to the sensor surface by means of a polymer interlayer, could be observed.
Y1  - 2014
U6  - http://dx.doi.org/10.1002/pssa.201330359
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1372
EP  - 1376
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Study of Interdigitated Electrode Arrays Using Experiments and Finite Element Models for the Evaluation of Sterilization Processes
JF  - Sensors
N2  - In this work, a sensor to evaluate sterilization processes with hydrogen peroxide vapor has been characterized. Experimental, analytical and numerical methods were applied to evaluate and study the sensor behavior. The sensor set-up is based on planar interdigitated electrodes. The interdigitated electrode structure consists of 614 electrode fingers spanning over a total sensing area of 20 mm2. Sensor measurements were conducted with and without microbiological spores as well as after an industrial sterilization protocol. The measurements were verified using an analytical expression based on a first-order elliptical integral. A model based on the finite element method with periodic boundary conditions in two dimensions was developed and utilized to validate the experimental findings.
Y1  - 2015
U6  - http://dx.doi.org/10.3390/s151026115
SN  - 1424-8220
N1  - This article belongs to the Special Issue "Gas Sensors—Designs and Applications"
VL  - 15
IS  - 10
SP  - 26115
EP  - 26127
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - http://dx.doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Bromm, Alexander
A1  - Wendeler, Luisa
A1  - Iken, Heiko
A1  - Palomar Duran, Marlena
A1  - Greeff, Anton
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Towards a biosensor to monitor the sterilisation efficiency of aseptic filling machines
JF  - Physica status solidi (a)
N2  - Sterilisation processes are compulsory in medicine, pharmacy, and food industries to prevent infections of consumers and microbiological contaminations of products. Monitoring the sterilisation by conventional microbiological methods is time- and lab-consuming. To overcome this problem, in this work a novel biosensor has been proposed. The sensor enables a fast method to evaluate sterilisation processes. By means of thin-film technology the sensor's transducer structures in form of IDEs (interdigitated electrodes) have been fabricated on a silicon substrate. Physical characterisation of the developed sensor was done by AFM, SEM, and profilometry. Impedance analyses were conducted for the electrical characterisation. As microbiological layer spores of B. atrophaeus have been immobilised on the sensing structure; spores of this type are a well-known sterilisation test organism. Impedance measurements at a fixed frequency over time were performed to monitor the immobilisation process. A sterilisation process according to aseptic filling machines was applied to demonstrate the sensor functionality. After both, immobilisation and sterilisation, a change in impedance could successfully be detected.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431900
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1299
EP  - 1305
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Arreola, Julio
A1  - Hansen, Christina
A1  - Greeff, Anton
A1  - Mayer, Marlena
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Impedimetric Biosensor to Enable Fast Evaluation of Gaseous Sterilization Processes
T2  - MDPI Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.3390/proceedings1040435
N1  - Eurosensors 2017 Conference, Paris, France, 3–6 September 2017
VL  - 1
IS  - 4
ER  - 
TY  - JOUR
A1  - Näther, Niko
A1  - Rolka, David
A1  - Poghossian, Arshak
A1  - Koudelka-Hep, M.
A1  - Schöning, Michael Josef
T1  - Two microcell flow-injection analysis (FIA) platforms for capacitive silicon-based field-effect sensors
JF  - Electrochimica Acta. 51 (2005), H. 5
Y1  - 2005
SN  - 0013-4686
U6  - http://dx.doi.org/10.1016/j.electacta.2005.04.066
SP  - 924
EP  - 929
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Poghossian, Arshak
A1  - Platen, J.
A1  - Yoshinobu, T.
A1  - Koudelka-Hep, M.
A1  - Schöning, Michael Josef
T1  - Multi-parameter sensing of both physical and (bio-)chemical quantities using the same transducer principle
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 172
EP  - 181
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Juárez, Leon M.
A1  - Emmerich, Rüdiger
A1  - Berger, Jörg
A1  - Friedrich, Peter
A1  - Schöning, Michael Josef
T1  - Detection of hydrogen peroxide (H2O2) at exposed temperatures for industrial processes
N2  - An H2O2 sensor for the application in industrial sterilisation processes has been developed. Therefore, automated sterilisation equipment at laboratory scale has been constructed using parts from industrial sterilisation facilities. In addition, a software tool has been developed for the control of the sterilisation equipment at laboratory scale. First measurements with the developed sensor set-up as part of the sterilisation equipment have been performed and the sensor has been physically characterised by optical microscopy and SEM.
KW  - Biosensor
KW  - Gas sensor
KW  - hydrogen peroxide
KW  - sterilisation
KW  - catalytic decomposition
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1418
ER  - 
TY  - JOUR
A1  - Näther, Niko
A1  - Henkel, Hartmut
A1  - Schneider, Andreas
A1  - Schöning, Michael Josef
T1  - Investigation of different catalytically active and passive materials for realising a hydrogen peroxide gas sensor
JF  - physica status solidi (a) . 206 (2009), H. 3
Y1  - 2009
SN  - 1862-6319
N1  - Special Issue: Engineering of Functional Interfaces (EnFI 08)
SP  - 449
EP  - 454
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Näther, Niko
A1  - Emmerich, Rüdiger
A1  - Berger, Jörg
A1  - Friedrich, Peter
A1  - Henkel, Hartmut
A1  - Schneider, Andreas
A1  - Schöning, Michael Josef
T1  - A novel gas-phase hydrogen peroxide sensor basing on a combined physical/chemical transduction mechanism
JF  - Nanofunctional materials, nanostructures, and novel devices for biological and chemical detection : November 27 - December 1, 2006, Boston, Massachusetts, USA ; [at the 2006 MRS Fall Meeting].
Y1  - 2006
SN  - 978-1-60423-407-7
N1  - Materials Research Society symposium proceedings ; 951 ; MRS fall meeting ; (2006.11.27-12.01 : ; Boston, Mass.)
SP  - 63
EP  - 68
PB  - Materials Research Soc.
CY  - Warrendale, Pa.
ER  - 
TY  - JOUR
A1  - Näther, Niko
A1  - Berger, Jörg
A1  - Emmerich, Rüdiger
A1  - Friedrich, Peter
A1  - Henkel, Hartmut
A1  - Schneider, Andreas
A1  - Schöning, Michael Josef
T1  - Entwicklung einer kalorimetrischen H2O2-Gassensoranordnung für die Prozessgaskontrolle
JF  - 8. Dresdner Sensor-Symposium : Sensoren für Umwelt, Klima und Sicherheit, Biosensoren und Biosysteme, Sensoren und Sensorsysteme für die Prozesstechnik, Trends in der Sensortechnik, Materialentwicklung für die Sensorik; 8. Dresdner Sensor-Symposium, 10. - 12. Dezember 2007, Dresden / Gerald Gerlach ... (Hg.)
Y1  - 2007
SN  - 978-3-940046-45-1
N1  - Dresdner Beiträge zur Sensorik ; 29
SP  - 261
EP  - 264
PB  - TUDpress, Verl. der Wissenschaften
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Näther, Niko
A1  - Berger, Jörg
A1  - Emmerich, Rüdiger
A1  - Friedrich, P.
A1  - Henkel, H.
A1  - Schöning, Michael Josef
T1  - H2O2-Konzentrationsbestimmung für die Prozessgasanalytik mittels eines kalorimetrischen Sensoraufbaus
JF  - Sensoren und Messsysteme 2008 : 14. Fachtagung Ludwigsburg, 11. und 12. März 2008 / VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik
Y1  - 2008
SN  - 978-3-18-092011-5
N1  - VDI-Berichte ; 2011 ; Sensoren und Messsysteme 2008, 14. GMA/ITG-Fachtagung, VDI/VDE- Gesellschaft Mess- und Automatisierungstechnik, + CD-ROM, Ludwigsburg, DE, 11.-12. Mar, 2008
SP  - 783
EP  - 792
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Näther, Niko
A1  - Auger, V.
A1  - Poghossian, Arshak
A1  - Koudelka-Hep, M.
A1  - Schöning, Michael Josef
T1  - A miniaturized flow-through cell in SU-8 technique for EIS sensors
JF  - Biomedizinische Technik. 49 (2004), H. 2
Y1  - 2004
SN  - 0932-4666
SP  - 994
EP  - 995
ER  - 
TY  - JOUR
A1  - Muschallik, Lukas
A1  - Molinnus, Denise
A1  - Jablonski, Melanie
A1  - Kipp, Carina Ronja
A1  - Bongaerts, Johannes
A1  - Pohl, Martina
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Selmer, Thorsten
A1  - Siegert, Petra
T1  - Synthesis of α-hydroxy ketones and vicinal (R, R)-diols by Bacillus clausii DSM 8716ᵀ butanediol dehydrogenase
JF  - RSC Advances
N2  - α-hydroxy ketones (HK) and 1,2-diols are important building blocks for fine chemical synthesis. Here, we describe the R-selective 2,3-butanediol dehydrogenase from B. clausii DSM 8716ᵀ (BcBDH) that belongs to the metal-dependent medium chain dehydrogenases/reductases family (MDR) and catalyzes the selective asymmetric reduction of prochiral 1,2-diketones to the corresponding HK and, in some cases, the reduction of the same to the corresponding 1,2-diols. Aliphatic diketones, like 2,3-pentanedione, 2,3-hexanedione, 5-methyl-2,3-hexanedione, 3,4-hexanedione and 2,3-heptanedione are well transformed. In addition, surprisingly alkyl phenyl dicarbonyls, like 2-hydroxy-1-phenylpropan-1-one and phenylglyoxal are accepted, whereas their derivatives with two phenyl groups are not substrates. Supplementation of Mn²⁺ (1 mM) increases BcBDH's activity in biotransformations. Furthermore, the biocatalytic reduction of 5-methyl-2,3-hexanedione to mainly 5-methyl-3-hydroxy-2-hexanone with only small amounts of 5-methyl-2-hydroxy-3-hexanone within an enzyme membrane reactor is demonstrated.
Y1  - 2020
U6  - http://dx.doi.org/10.1039/D0RA02066D
SN  - 2046-2069
VL  - 10
SP  - 12206
EP  - 12216
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Muschallik, Lukas
A1  - Molinnus, Denise
A1  - Bongaerts, Johannes
A1  - Pohl, Martina
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Siegert, Petra
A1  - Selmer, Thorsten
T1  - (R,R)-Butane-2,3-diol Dehydrogenase from Bacillus clausii DSM 8716T: Cloning and Expression of the bdhA-Gene, and Initial Characterization of Enzyme
JF  - Journal of Biotechnology
N2  - The gene encoding a putative (R,R)-butane-2,3-diol dehydrogenase (bdhA) from Bacillus clausii DSM 8716T was isolated, sequenced and expressed in Escherichia coli. The amino acid sequence of the encoded protein is only distantly related to previously studied enzymes (identity 33–43%) and exhibited some uncharted peculiarities. An N-terminally StrepII-tagged enzyme variant was purified and initially characterized. The isolated enzyme catalyzed the (R)-specific oxidation of (R,R)- and meso-butane-2,3-diol to (R)- and (S)-acetoin with specific activities of 12 U/mg and 23 U/mg, respectively. Likewise, racemic acetoin was reduced with a specific activity of up to 115 U/mg yielding a mixture of (R,R)- and meso-butane-2,3-diol, while the enzyme reduced butane-2,3-dione (Vmax 74 U/mg) solely to (R,R)-butane-2,3-diol via (R)-acetoin. For these reactions only activity with the co-substrates NADH/NAD+ was observed. The enzyme accepted a selection of vicinal diketones, α-hydroxy ketones and vicinal diols as alternative substrates. Although the physiological function of the enzyme in B. clausii remains elusive, the data presented herein clearly demonstrates that the encoded enzyme is a genuine (R,R)-butane-2,3-diol dehydrogenase with potential for applications in biocatalysis and sensor development.
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.jbiotec.2017.07.020
SN  - 0168-1656
VL  - 258
SP  - 41
EP  - 50
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Muschallik, Lukas
A1  - Kipp, Carina Ronja
A1  - Recker, Inga
A1  - Bongaerts, Johannes
A1  - Pohl, Martina
A1  - Gelissen, Melanie
A1  - Schöning, Michael Josef
A1  - Selmer, Thorsten
A1  - Siegert, Petra
T1  - Synthesis of α-hydroxy ketones and vicinal diols with the Bacillus licheniformis DSM 13T butane-2, 3-diol dehydrogenase
JF  - Journal of Biotechnology
N2  - The enantioselective synthesis of α-hydroxy ketones and vicinal diols is an intriguing field because of the broad applicability of these molecules. Although, butandiol dehydrogenases are known to play a key role in the production of 2,3-butandiol, their potential as biocatalysts is still not well studied. Here, we investigate the biocatalytic properties of the meso-butanediol dehydrogenase from Bacillus licheniformis DSM 13T (BlBDH). The encoding gene was cloned with an N-terminal StrepII-tag and recombinantly overexpressed in E. coli. BlBDH is highly active towards several non-physiological diketones and α-hydroxyketones with varying aliphatic chain lengths or even containing phenyl moieties. By adjusting the reaction parameters in biotransformations the formation of either the α-hydroxyketone intermediate or the diol can be controlled.
Y1  - 2020
SN  - 2590-1559
U6  - http://dx.doi.org/10.1016/j.jbiotec.2020.09.016
VL  - 202
IS  - Vol. 324
SP  - 61
EP  - 70
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Murib, Mohammed Sharif
A1  - Yeap, Weng-Siang
A1  - Martens, Daan
A1  - Bienstman, Peter
A1  - Ceuninck, Ward de
A1  - Grinsven, Bart van
A1  - Schöning, Michael Josef
A1  - Michiels, Luc
A1  - Haenen, Ken
A1  - Ameloot, Marcel
A1  - Serpengüzel, Ali
A1  - Wagner, Patrick
T1  - Photonic detection and characterization of DNA using sapphire microspheres
JF  - Journal of biomedical optics
N2  - A microcavity-based deoxyribonucleic acid (DNA) optical biosensor is demonstrated for the first time using synthetic sapphire for the optical cavity. Transmitted and elastic scattering intensity at 1510 nm are analyzed from a sapphire microsphere (radius 500  μm, refractive index 1.77) on an optical fiber half coupler. The 0.43 nm angular mode spacing of the resonances correlates well with the optical size of the sapphire sphere. Probe DNA consisting of a 36-mer fragment was covalently immobilized on a sapphire microsphere and hybridized with a 29-mer target DNA. Whispering gallery modes (WGMs) were monitored before the sapphire was functionalized with DNA and after it was functionalized with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). The shift in WGMs from the surface modification with DNA was measured and correlated well with the estimated thickness of the add-on DNA layer. It is shown that ssDNA is more uniformly oriented on the sapphire surface than dsDNA. In addition, it is shown that functionalization of the sapphire spherical surface with DNA does not affect the quality factor (Q≈104) of the sapphire microspheres. The use of sapphire is especially interesting because this material is chemically resilient, biocompatible, and widely used for medical implants.
Y1  - 2014
U6  - http://dx.doi.org/10.1117/1.JBO.19.9.097006
SN  - 1560-2281 (E-Journal); 1083-3668 (Print)
VL  - 19
IS  - 9
SP  - 097006
PB  - SPIE
CY  - Bellingham
ER  - 
TY  - JOUR
A1  - Murib, Mohammed S.
A1  - Tran, Anh Quang
A1  - Ceuninck, Ward de
A1  - Schöning, Michael Josef
A1  - Nesladek, Milos
A1  - Serpengüzel, Ali
A1  - Wagner, Patrick
T1  - Analysis of an optical biosensor based on elastic light scattering from diamond-, glass-, and sapphire microspheres
JF  - Physica Status Solidi A
N2  - Deoxyribonucleic acid (DNA) and protein recognition are now standard tools in biology. In addition, the special optical properties of microsphere resonators expressed by the high quality factor (Q-factor) of whispering gallery modes (WGMs) or morphology dependent resonances (MDRs) have attracted the attention of the biophotonic community. Microsphere-based biosensors are considered as powerful candidates to achieve label-free recognition of single molecules due to the high sensitivity of their WGMs. When the microsphere surface is modified with biomolecules, the effective refractive index and the effective size of the microsphere change resulting in a resonant wavelength shift. The transverse electric (TE) and the transverse magnetic (TM) elastic light scattering intensity of electromagnetic waves at 600 and 1400 nm are numerically calculated for DNA and unspecific binding of proteins to the microsphere surface. The effect of changing the optical properties was studied for diamond (refractive index 2.34), glass (refractive index 1.50), and sapphire (refractive index 1.75) microspheres with a 50 µm radius. The mode spacing, the linewidth of WGMs, and the shift of resonant wavelength due to the change in radius and refractive index, were analyzed by numerical simulations. Preliminary results of unspecific binding of biomolecules are presented. The calculated shift in WGMs can be used for biomolecules detection.
Y1  - 2012
U6  - http://dx.doi.org/10.1002/pssa.201100795
SN  - 1862-6319
N1  - Special Issue: "Fundamentals and Applications of Diamond"
VL  - 209
IS  - 9
SP  - 1804
EP  - 1810
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Martens, D.
A1  - Liu, X.
A1  - Bienstman, P.
A1  - Fahlman, M.
A1  - Schöning, Michael Josef
A1  - Michiels, L.
A1  - Haenen, K.
A1  - Serpengüzel, A.
A1  - Wagner, Patrick
T1  - Photonic studies on polymer-coated sapphire-spheres : a model system for biological ligands
JF  - Sensors and actuators A: Physical
N2  - In this study we show an optical biosensor concept, based on elastic light scattering from sapphire microspheres. Transmitted and elastic scattering intensity of the microspheres (radius 500 μm, refractive index 1.77) on an optical fiber half coupler is analyzed at 1510 nm. The 0.43 nm angular mode spacing of the resonances is comparable to the angular mode spacing value estimated using the optical size of the microsphere. The spectral linewidths of the resonances are in the order of 0.01 nm, which corresponds to quality factors of approximately 105. A polydopamine layer is used as a functionalizing agent on sapphire microspherical resonators in view of biosensor implementation. The varying layer thickness on the microsphere is determined as a function of the resonance wavelength shift. It is shown that polymer functionalization has a minor effect on the quality factor. This is a promising step toward the development of an optical biosensor.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.sna.2014.11.024
SN  - 1873-3069 (E-Journal); 0924-4247 (Print)
VL  - 222
SP  - 212
EP  - 219
PB  - Elsevier
CY  - Amsterdam
ER  -