TY  - CHAP
A1  - Wiezik, P.
A1  - Hötter, Jan-Steffen
A1  - Gebhardt, Andreas
T1  - Integration des Laserpolierens in den SLM-Prozess
T2  - DVS Congress 2015, Große Schweißtechnische Tagung, DVS-Studentenkongress, Fügen von faserverstärkten Kunststoffen, Anwendungsnahe Schweißsimulation, Vorträge der Veranstaltungen, Nürnberg, DE, 15.-17. Sep, 2015
Y1  - 2015
SN  - 978-3-945023-46-4
VL  - 315
SP  - 117
EP  - 120
PB  - Verl. für Schweißen und verwandte Verfahren, DVS-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wiesen, Patrick
A1  - Engemann, Heiko
A1  - Limpert, Nicolas
A1  - Kallweit, Stephan
T1  - Learning by Doing - Mobile Robotics in the FH Aachen ROS Summer School
T2  - European Robotics Forum 2018, TRROS18 Workshop
Y1  - 2018
SP  - 47
EP  - 58
ER  - 
TY  - CHAP
A1  - Wiesen, Andreas
A1  - Schleser, Markus
T1  - Entwicklung einer Qualitätssicherung für das Laserstrahlschweißen im Vakuum mittels Bildverarbeitung
T2  - Große Schweißtechnische Tagung
Y1  - 2019
SN  - 978-3-96144-066-5
N1  - DVS CONGRESS 2019, Große Schweißtechnische Tagung, DVS-Studentenkongress. 16. bis 17. September 2019, Düsseldorf. DVS-Berichte, Band 355
SP  - 1
EP  - 6
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wiegner, Jonas
A1  - Volker, Hanno
A1  - Mainz, Fabian
A1  - Backes, Andreas
A1  - Löken, Michael
A1  - Hüning, Felix
T1  - Wiegand-effect-powered wireless IoT sensor node
T2  - ITG-Fb. 303: Sensoren und Messsysteme
N2  - In this article we describe an Internet-of-Things sensing device with a wireless interface which is powered by the oftenoverlooked harvesting method of the Wiegand effect. The sensor can determine position, temperature or other resistively measurable quantities and can transmit the data via an ultra-low power ultra-wideband (UWB) data transmitter. With this approach we can energy-self-sufficiently acquire, process, and wirelessly transmit data in a pulsed operation. A proof-of-concept system was built up to prove the feasibility of the approach. The energy consumption of the system is analyzed and traced back in detail to the individual components, compared to the generated energy and processed to identify further optimization options. Based on the proof-of-concept, an application demonstrator was developed. Finally, we point out possible use cases.
Y1  - 2022
SN  - 978-3-8007-5835-7
N1  - Sensoren und Messsysteme - 21. ITG/GMA-Fachtagung, 10.05.2022 - 11.05.2022 in Nürnberg
SP  - 255
EP  - 260
PB  - VDE Verlag GmbH
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Wetter, Martin
A1  - Kern, Alexander
T1  - Number of lightning strikes to tall structures - comparison of calculations and measurements using a modern lightning monitoring system
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
Y1  - 2014
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Werner, Frederik
A1  - Yoshinobu, T.
A1  - Miyamoto, K.
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Semiconductor-based sensors for imaging of chemical processes
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 5
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Werner, Frederik
A1  - Mansour, Ahmed
A1  - Rateike, Franz-Matthias
A1  - Schusser, Sebastian
A1  - Wagner, Torsten
A1  - Yoshinobu, Tatsuo
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
ED  - Gerlach, Gerald
T1  - Kompakter Aufbau eines lichtadressierbaren potentiometrischen Sensors mit verfahrbarem Diodenlaser
T2  - 10. Dresdner Sensor-Symposium : Dresden, 5. - 7. Dezember 2011 ; miniaturisierte analytische Verfahren, Hochtemperatur-Sensoren, Sensoren für Bioprozess- und Verfahrenstechnik, Sensoren für die Medizin, Chemische Verfahrenstechnik, Lebensmittelanalytik, innovative Sensorlösungen, Sensoren für die Wasserqualität, Selbstüberwachung / Gerald Gerlach ... (Hg.) Dresdner Beiträge zur Sensorik. 43
Y1  - 2011
SN  - 978-3-942710-53-4
SP  - 277
EP  - 280
PB  - TUDpress
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Wellmer, Georg
A1  - Chen, B.-H.
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Numerical prediction of aeroelastic effects on twin-sting-rig mounted models for rear fuselage and empennage flow investigation in transonic windtunnel
T2  - Proceedings / IFASD 2007, CEAS/AIAA/KTH International Forum on Aeroelasticity and Structural Dynamics, June 18 - 21, 2007, Stockholm, Sweden
Y1  - 2007
PB  - KTH
CY  - Stockholm
ER  - 
TY  - CHAP
A1  - Welden, Melanie
A1  - Severins, Robin
A1  - Poghossian, Arshak
A1  - Wege, Christina
A1  - Siegert, Petra
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Studying the immobilization of acetoin reductase with Tobacco mosaic virus particles on capacitive field-effect sensors
T2  - 2022 IEEE International Symposium on Olfaction and Electronic Nose (ISOEN)
N2  - A capacitive electrolyte-insulator-semiconductor (EISCAP) biosensor modified with Tobacco mosaic virus (TMV) particles for the detection of acetoin is presented. The enzyme acetoin reductase (AR) was immobilized on the surface of the EISCAP using TMV particles as nanoscaffolds. The study focused on the optimization of the TMV-assisted AR immobilization on the Ta 2 O 5 -gate EISCAP surface. The TMV-assisted acetoin EISCAPs were electrochemically characterized by means of leakage-current, capacitance-voltage, and constant-capacitance measurements. The TMV-modified transducer surface was studied via scanning electron microscopy.
KW  - Tobacco mosaic virus
KW  - acetoin
KW  - capacitive field-effect biosensor
KW  - enzyme immobilization
Y1  - 2022
SN  - 978-1-6654-5860-3 (Online)
SN  - 978-1-6654-5861-0 (Print)
U6  - https://doi.org/10.1109/ISOEN54820.2022.9789657
N1  - IEEE International Symposium on Olfaction and Electronic Nose (ISOEN), 29 May 2022 - 01 June 2022, Aveiro, Portugal.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Weiss, Christian
A1  - Heslenfeld, Jonas
A1  - Saewe, Jasmin Kathrin
A1  - Bremen, Sebastian
A1  - Häfner, Constantin Leon
T1  - Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF)
T2  - Procedia CIRP 12th CIRP Conference on Photonic Technologies [LANE 2022]
N2  - In the Laser Powder Bed Fusion (LPBF) process, parts are built out of metal powder material by exposure of a laser beam. During handling operations of the powder material, several influencing factors can affect the properties of the powder material and therefore directly influence the processability during manufacturing. Contamination by moisture due to handling operations is one of the most critical aspects of powder quality. In order to investigate the influences of powder humidity on LPBF processing, four materials (AlSi10Mg, Ti6Al4V, 316L and IN718) are chosen for this study. The powder material is artificially humidified, subsequently characterized, manufactured into cubic samples in a miniaturized process chamber and analyzed for their relative density. The results indicate that the processability and reproducibility of parts made of AlSi10Mg and Ti6Al4V are susceptible to humidity, while IN718 and 316L are barely influenced.
KW  - LPBF
KW  - Additive Manufacturing
KW  - Powder Material
KW  - Humidity
Y1  - 2022
U6  - https://doi.org/10.1016/j.procir.2022.08.102
SN  - 2212-8271
N1  - 12th CIRP Conference on Photonic Technologies [LANE 2022], 04. September 2022 bis 08. September 2022, Fürth
VL  - 111
SP  - 115
EP  - 120
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Weiss, Alexander
A1  - Abanteriba, Sylvester
A1  - Esch, Thomas
T1  - Investigation of Flow Separation Inside a Conical Rocket Nozzle With the Aid of an Annular Cross Flow
T2  - Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B
N2  - Flow separation is a phenomenon that occurs in all kinds of supersonic nozzles sometimes during run-up and shut-down operations. Especially in expansion nozzles of rocket engines with large area ratio, flow separation can trigger strong side loads that can damage the structure of the nozzle. The investigation presented in this paper seeks to establish measures that may be applied to alter the point of flow separation. In order to achieve this, a supersonic nozzle was placed at the exit plane of the conical nozzle. This resulted in the generation of cross flow surrounding the core jet flow from the conical nozzle. Due to the entrainment of the gas stream from the conical nozzle the pressure in its exit plane was found to be lower than that of the ambient. A Cold gas instead of hot combustion gases was used as the working fluid. A mathematical simulation of the concept was validated by experiment. Measurements confirmed the simulation results that due to the introduction of a second nozzle the pressure in the separated region of the conical nozzle was significantly reduced. It was also established that the boundary layer separation inside the conical nozzle was delayed thus allowing an increased degree of overexpansion. The condition established by the pressure measurements was also demonstrated qualitatively using transparent nozzle configurations.
Y1  - 2007
SN  - 0-7918-4288-6
U6  - https://doi.org/10.1115/FEDSM2007-37387
N1  - Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B. San Diego, California, USA. July 30–August 2, 2007
SP  - 1861
EP  - 1871
PB  - American Society of Mechanical Engineers (ASME)
CY  - New York
ER  - 
TY  - CHAP
A1  - Weingart, Daniel
A1  - Schneider, Ulf
A1  - Wollert, Jörg
T1  - Doppelt gekoppelt - Kabellose und dynamische Anbindung von CANopen an Profinet IO
T2  - Elektrische Automatisierung - Systeme und Komponenten: SPS-IPC-Drives 2009, Fachmesse & Kongress, 24. - 26. Nov. 2009, Nürnberg ; [Tagungsband]
Y1  - 2009
SN  - 978-3-8007-3184-8
SP  - 147
EP  - 154
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Weil, M.
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Cherstvy, A.
T1  - Electrical monitoring of layer-by-layer adsorption of oppositely charged macromolecules by means of capacitive field-effect devices
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - https://doi.org/10.5162/IMCS2012/P2.5.2
SP  - 1575
EP  - 1578
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Tellis, Jane J.
A1  - Duhovic, Miro
T1  - Characterization of tool-part-interaction an interlaminar friction for manufacturing process simulation
T2  - ECCM 17, 17th European Conference on Composite Materials, München, DE, Jun 26-30, 2016
Y1  - 2016
SN  - 978-3-00-053387-7
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Hailer, Benjamin
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
T2  - Proceedings of SAMPE Europe Conference 2019, Nantes, France
Y1  - 2019
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Hailer, Benjamin
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
T2  - Proceedings of SAMPE Europe Conference, Amiens , France
Y1  - 2015
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Weber, Tobias
T1  - Manufacturing Process Simulation for Tooling Optimization: Reduction of Quality Issues During Autoclave Manufacturing of Composite Parts
T2  - Proceedings of SAMPE Europe Conference 2015, Amiens, France
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Weber, S.
A1  - Terstegge, Andreas
A1  - Halling, H.
A1  - Herzog, H.
A1  - Reinartz, R.
A1  - Reinhart, P.
A1  - Rongen, F.
A1  - Müller-Gärtner, H.-W.
T1  - The design of an animal PET: flexible geometry for achieving optimal spatial resolution or high sensitivity
T2  - Conference record / 1995 IEEE Nuclear Science Symposium and Medical Imaging, October 21 - 28, 1995, San Francisco ; vol. 2
Y1  - 1995
SN  - 078033180X ; 0780331818 ; 0780331826
SP  - 1002
EP  - 1005
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Weber, S.
A1  - Terstegge, Andreas
A1  - Engels, R.
A1  - Herzog, H.
A1  - Reinartz, R.
A1  - Reinhart, P.
A1  - Rongen, F.
A1  - Müller-Gärtner, H. W.
A1  - Halling, H.
T1  - The KFA TierPET: performance characteristics and measurements
T2  - Conference record / 1996 IEEE Nuclear Science Symposium [and Medical Imaging], November 2 - 9, 1996, Anaheim, California ; vol. 2
Y1  - 1996
SN  - 0-7803-3534-1
SN  - 1082-3654
SP  - 1117
EP  - 1119
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Weber, Niklas
A1  - Wolf, Martin R.
ED  - Barton, Thomas
T1  - Datenerhebung für die CDG-Forschung
T2  - Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)
Y1  - 2017
SN  - 978-3-944330-56-3
SP  - 218
EP  - 227
PB  - mana-Buch
CY  - Heide
ER  -