TY  - JOUR
A1  - Finger, Felix
A1  - Bil, Cees
A1  - Braun, Carsten
T1  - Initial Sizing Methodology for Hybrid-Electric General Aviation Aircraft
JF  - Journal of Aircraft
Y1  - 2019
U6  - http://dx.doi.org/10.2514/1.C035428
SN  - 1533-3868
VL  - 57
IS  - 2
SP  - 245
EP  - 255
ER  - 
TY  - JOUR
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames
JF  - Engineering Structures
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.engstruct.2019.109435
SN  - 0141-0296
VL  - 197
IS  - Article 109435
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Gerhards, Benjamin
A1  - Schleser, Markus
A1  - Otten,, Christian
A1  - Schwarz, Alexander
A1  - Gebhardt, Andreas
T1  - Innovative Laser Beam Joining Technology for Additive Manufactured Parts
T2  - Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava
Y1  - 2019
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Schiedermeier, Maximilian
A1  - Rettner, Cornelius
A1  - Heilmann, Marcel
A1  - Schneider, Felix
A1  - Marz, Martin
T1  - Interference of automotive HV-DC-systems by traction voltage-source-inverters (VSI)
JF  - 2019 IEEE Transportation Electrification Conference (ITEC-India)
Y1  - 2019
U6  - http://dx.doi.org/10.1109/ITEC-India48457.2019.ITECINDIA2019-37
SP  - 1
EP  - 6
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Sube, Maike
A1  - Schneider, Maike
A1  - Jungemann, Christoph
T1  - Introducing a Cross-University Bachelor’s Programme with Orientation Semester - Enabling a Permeable Academic Education System
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - http://dx.doi.org/10.1109/REM.2019.8744132
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Leschinger, Tim
A1  - Besch, Katharina
A1  - Aydin, Cansu
A1  - Staat, Manfred
A1  - Scaal, Martin
A1  - Müller, Lars Peter
A1  - Wegmann, Kilian
T1  - Irreparable rotator cuff tears: a biomechanical comparison of superior capsuloligamentous complex reconstruction techniques and an interposition graft technique
JF  - The Orthopaedic Journal of Sports Medicine
Y1  - 2019
U6  - http://dx.doi.org/10.1177/2325967119864590
VL  - 7
IS  - 8
SP  - 1
EP  - 5
ER  - 
TY  - CHAP
A1  - Brockmann, Carsten
A1  - Sultanow, Eldar
A1  - Czarnecki, Christian
ED  - Draude, Claude
ED  - Lange, Martin
ED  - Sick, Bernhard
T1  - Is enterprise architecture still relevant in the digital age?
T2  - GI Edition Proceedings Band 295 INFORMATIK 2019, Workshop-Beiträge
KW  - Preface
KW  - Enterprise Architecture
KW  - Digital Age
Y1  - 2019
SN  - 9783885796893
U6  - http://dx.doi.org/10.18420/inf2019_ws01
SN  - 1617-5468
N1  - 50 Jahre Gesellschaft für Informatik – Informatik für Gesellschaft. 16. September, Kassel
SP  - 21
EP  - 21
PB  - Köllen
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Ketelhut, Maike
A1  - Göll, Fabian
A1  - Braunstein, Bjoern
A1  - Albracht, Kirsten
A1  - Abel, Dirk
T1  - Iterative learning control of an industrial robot for neuromuscular training
T2  - 2019 IEEE Conference on Control Technology and Applications
N2  - Effective training requires high muscle forces potentially leading to training-induced injuries. Thus, continuous monitoring and controlling of the loadings applied to the musculoskeletal system along the motion trajectory is required. In this paper, a norm-optimal iterative learning control algorithm for the robot-assisted training is developed. The algorithm aims at minimizing the external knee joint moment, which is commonly used to quantify the loading of the medial compartment. To estimate the external knee joint moment, a musculoskeletal lower extremity model is implemented in OpenSim and coupled with a model of an industrial robot and a force plate mounted at its end-effector. The algorithm is tested in simulation for patients with varus, normal and valgus alignment of the knee. The results show that the algorithm is able to minimize the external knee joint moment in all three cases and converges after less than seven iterations.
KW  - Knee
KW  - Training
KW  - Load modeling
KW  - Force
KW  - Iterative learning control
Y1  - 2019
SN  - 978-1-7281-2767-5 (ePub)
SN  - 978-1-7281-2766-8 (USB)
SN  - 978-1-7281-2768-2 (PoD)
U6  - http://dx.doi.org/10.1109/CCTA.2019.8920659
N1  - 2019 IEEE Conference on Control Technology and Applications (CCTA) Hong Kong, China, August 19-21, 2019
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Meyer, Carolin
A1  - Gaalen, Kerstin van
A1  - Leschinger, Tim
A1  - Scheyerer, Max J.
A1  - Neiss, Wolfram F.
A1  - Staat, Manfred
A1  - Müller, Lars P.
A1  - Wegmann, Kilian
T1  - Kyphoplasty of Osteoporotic Fractured Vertebrae: A Finite Element Analysis about Two Types of Cement
JF  - BioMed Research International
Y1  - 2019
U6  - http://dx.doi.org/10.1155/2019/9232813
SP  - Article ID 9232813
ER  - 
TY  - THES
A1  - Tran, Ngoc Trinh
T1  - Limit and Shakedown analysis of structures under stochastic conditions
Y1  - 2019
U6  - http://dx.doi.org/10.24355/dbbs.084-201902121135-0
PB  - Technische Universität Braunschweig
CY  - Braunschweig
ER  - 
TY  - JOUR
A1  - Roeth, A.A.
A1  - Slabu, I.
A1  - Kessler, A.
A1  - Engelmann, Ulrich M.
T1  - Local treatment of pancreatic cancer with magnetic nanoparticles
JF  - HPB
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.hpb.2019.10.959
SN  - 1365-182X
VL  - 21
IS  - Supplement 3
SP  - S868
EP  - S869
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Tippkötter, Nils
A1  - Möhring, Sophie
A1  - Roth, Jasmine
A1  - Wulfhorst, Helene
T1  - Logistics of lignocellulosic feedstocks: preprocessing as a preferable option
T2  - Biorefineries
N2  - In comparison to crude oil, biorefinery raw materials are challenging in concerns of transport and storage. The plant raw materials are more voluminous, so that shredding and compacting usually are necessary before transport. These mechanical processes can have a negative influence on the subsequent biotechnological processing and shelf life of the raw materials. Various approaches and their effects on renewable raw materials are shown. In addition, aspects of decentralized pretreatment steps are discussed. Another important aspect of pretreatment is the varying composition of the raw materials depending on the growth conditions. This problem can be solved with advanced on-site spectrometric analysis of the material.
KW  - Analytics
KW  - Decentral
KW  - Mechanical
KW  - On-site
KW  - Pre-treatment
Y1  - 2019
SN  - 978-3-319-97117-9
SN  - 978-3-319-97119-3
U6  - http://dx.doi.org/10.1007/10_2017_58
N1  - Advances in biochemical engineering/biotechnology ; Vol. 166
SP  - 43
EP  - 68
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Stenger, David
A1  - Altherr, Lena
A1  - Abel, Dirk
T1  - Machine learning and metaheuristics for black-box optimization of product families: a case-study investigating solution quality vs. computational overhead
T2  - Operations Research Proceedings 2018
N2  - In product development, numerous design decisions have to be made. Multi-domain virtual prototyping provides a variety of tools to assess technical feasibility of design options, however often requires substantial computational effort for just a single evaluation. A special challenge is therefore the optimal design of product families, which consist of a group of products derived from a common platform. Finding an optimal platform configuration (stating what is shared and what is individually designed for each product) and an optimal design of all products simultaneously leads to a mixed-integer nonlinear black-box optimization model. We present an optimization approach based on metamodels and a metaheuristic. To increase computational efficiency and solution quality, we compare different types of Gaussian process regression metamodels adapted from the domain of machine learning, and combine them with a genetic algorithm. We illustrate our approach on the example of a product family of electrical drives, and investigate the trade-off between solution quality and computational overhead.
KW  - Product family optimization
KW  - Mixed-integer nonlinear black-box optimization
KW  - Engineering optimization
KW  - Machine learning
Y1  - 2019
SN  - 978-3-030-18499-5  (Print)
SN  - 978-3-030-18500-8 (Online)
U6  - http://dx.doi.org/10.1007/978-3-030-18500-8_47
SP  - 379
EP  - 385
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Hailer, Benjamin
A1  - Weber, Tobias
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for Autoclave-Produced Sandwich Structures
T2  - Proceedings of SAMPE Europe Conference 2019, Nantes, France
Y1  - 2019
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Hailer, Benjamin
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation for the Prediction of Tool-Part-Interaction and Ply Wrinkling
T2  - Proceedings of SAMPE Europe Conference 2019, Nantes, France
Y1  - 2019
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Mass, Primary Energy, and Cost - The Impact of Optimization Objectives on the Initial Sizing of Hybrid-Electric General Aviation Aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, DLRK 2019. Darmstadt, Germany
Y1  - 2019
U6  - http://dx.doi.org/10.25967/490012
SP  - 1
EP  - 17
ER  - 
TY  - JOUR
A1  - Achtsnicht, Stefan
A1  - Schönenborn, Kristina
A1  - Offenhäusser, Andreas
A1  - Krause, Hans-Joachim
T1  - Measurement of the magnetophoretic velocity of different superparamagnetic beads
JF  - Journal of Magnetism and Magnetic Materials
N2  - The movement of magnetic beads due to a magnetic field gradient is of great interest in different application fields. In this report we present a technique based on a magnetic tweezers setup to measure the velocity factor of magnetically actuated individual superparamagnetic beads in a fluidic environment. Several beads can be tracked simultaneously in order to gain and improve statistics. Furthermore we show our results for different beads with hydrodynamic diameters between 200 and 1000 nm from diverse manufacturers. These measurement data can, for example, be used to determine design parameters for a magnetic separation system, like maximum flow rate and minimum separation time, or to select suitable beads for fixed experimental requirements.
KW  - magnetophoretic velocity
KW  - superparamagnetic bead
KW  - magnetic tweezers
KW  - magnetic separation
KW  - magnetic actuation
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.jmmm.2018.10.066
SN  - 0304-8853
VL  - 477
IS  - 1
SP  - 244
EP  - 248
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Scholl, Ingrid
A1  - Bartella, Alex
A1  - Moluluo, Cem
A1  - Ertural, Berat
A1  - Laing, Frederic
A1  - Suder, Sebastian
T1  - MedicVR : Acceleration and Enhancement Techniques for Direct Volume Rendering in Virtual Reality
T2  - Bildverarbeitung für die Medizin 2019 : Algorithmen – Systeme – Anwendungen
Y1  - 2019
SN  - 978-3-658-25326-4
U6  - http://dx.doi.org/10.1007/978-3-658-25326-4_32
SP  - 152
EP  - 157
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Schildt, Ph.
A1  - Braun, Carsten
A1  - Marzocca, P.
T1  - Metric evaluating potentials of condition-monitoring approaches for hybrid electric aircraft propulsion systems
JF  - CEAS Aeronautical Journal
Y1  - 2019
U6  - http://dx.doi.org/10.1007/s13272-019-00411-3
SN  - 1869-5590
SP  - 1
EP  - 14
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Campen, R.
A1  - Kowalski, Julia
A1  - Lyons, W.B.
A1  - Tulaczyk, S.
A1  - Dachwald, Bernd
A1  - Pettit, E.
A1  - Welch, K. A.
A1  - Mikucki, J.A.
T1  - Microbial diversity of an Antarctic subglacial community and high‐resolution replicate sampling inform hydrological connectivity in a polar desert
JF  - Environmental Microbiology
Y1  - 2019
U6  - http://dx.doi.org/10.1111/1462-2920.14607
SN  - 1462-2920
IS  - accepted article
PB  - Wiley
CY  - Weinheim
ER  -