TY  - CHAP
A1  - Butenweg, Christoph
A1  - Thierauf, G.
ED  - Papadrakakis, M.
ED  - Topping, B.H.V.
T1  - Automatic design of reinforced concrete structures with parallel computing
T2  - Innovative computational methods for structural mechanics
N2  - A concept for the analysis and optimal design of reinforced concrete structures is described. It is based on a nonlinear optimization algorithm and a finite element program for linear and nonlinear analysis of structures. With the aim of minimal cost design a two stage optimization using efficient gradient algorithm is developed. The optimization problems on global (structural) and local (crosssectional) level are formulated. A parallelization concept for solving the two stage optimization problem in minimal time is presented. Examples are included to illustrate the practical use and the effectively of the parallelization in the area of engineering design.
Y1  - 1999
SN  - 1-874672-05-9
U6  - https://doi.org/10.4203/csets.1.14
SP  - 305
EP  - 318
PB  - Saxe-Coburg Publication
CY  - Edinburgh
ER  - 
TY  - JOUR
A1  - Marx, Ulrich
A1  - Schenk, Friedrich
A1  - Behrens, Jan
A1  - Meyr, Ulrike
A1  - Wanek, Paul
A1  - Zang, Werner
A1  - Schmitt, Robert
A1  - Brüstle, Oliver
A1  - Zenke, Martin
A1  - Klocke, Fritz
T1  - Automatic production of induced pluripotent stem cells
JF  - Procedia CIRP : First CIRP Conference on BioManufacturing
Y1  - 2013
SN  - 2212-8271
VL  - Vol. 5
SP  - 2
EP  - 6
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Ohler, C.
A1  - Moers, J.
T1  - Band offsets at heavily strained III - V interfaces / C. Ohler ; A. Förster ; J. Moers...
JF  - Journal of Physics D: Applied Physics. 30 (1997), H. 10
Y1  - 1997
SN  - 0022-3727
N1  - ISSN der E-Ausg.: 1361-6463
SP  - 1436
EP  - 1441
ER  - 
TY  - JOUR
A1  - Förster, Arnold
A1  - Ohler, C.
A1  - Daniels, C.
T1  - Barrier height at clean Au/InAs(100) interfaces / C. Ohler ; C. Daniels ; A. Förster ...
JF  - Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures. 15 (1997), H. 3
Y1  - 1997
SN  - 0169-4332
SP  - 702
EP  - 706
ER  - 
TY  - CHAP
A1  - Morandi, Paolo
A1  - Butenweg, Christoph
A1  - Breis, Khaled
A1  - Beyer, Katrin
A1  - Magenes, Guido
ED  - Arion, Cristian
ED  - Scupin, Alexandra
ED  - Ţigănescu, Alexandru
T1  - Behaviour factor q for the seismic design of URM buildings
T2  - The Third European Conference on Earthquake Engineering and Seismology
N2  - Recent earthquakes showed that low-rise URM buildings following codecompliant seismic design and details behaved in general very well without substantial damages. Although advances in simulation tools make nonlinear calculation methods more readily accessible to designers, linear analyses will still be the standard design method for years to come. The present paper aims to improve the linear seismic design method by providing a proper definition of the q-factor of URM buildings. Values of q-factors are derived for low-rise URM buildings with rigid diaphragms, with reference to modern structural configurations realized in low to moderate seismic areas of Italy and Germany. The behaviour factor components for deformation and energy dissipation capacity and for overstrength due to the redistribution of forces are derived by means of pushover analyses. As a result of the investigations, rationally based values of the behaviour factor q to be used in linear analyses in the range of 2.0 to 3.0 are proposed.
KW  - unreinforced masonry buildings
KW  - modern constructions
KW  - seismic design
KW  - linear elastic analysis;
KW  - behaviour factor q
Y1  - 2022
SN  - 978-973-100-533-1
N1  - 3ECEES - Third European Conference on Earthquake Engineering and Seismology, September 4 – September 9, 2022, Bucharest
SP  - 1184
EP  - 1194
ER  - 
TY  - JOUR
A1  - Darmo, J.
A1  - Schäffer, F.
A1  - Förster, Arnold
A1  - Kordos, P.
T1  - Beryllium doped low-temperature-grown MBE GaAs: material for photomixing in the THz frequency range
JF  - ASDAM 2000 : conference proceedings / edited by Jozef Osvald ... [et al.]
Y1  - 2000
SN  - 0780359399
N1  - International Conference on Advanced Semiconductor Devices and Microsystems ; (3rd : ; 2000 : ; Smolenice, Slovakia)
SP  - 147
EP  - 150
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Bechstedt, U.
A1  - Berg, Georg P. A.
A1  - Hacker, U.
A1  - Hardt, Arno
A1  - Hürlimann, W.
A1  - Maier, R.
A1  - Martin, S.
A1  - Meissburger, J.
A1  - Römer, J. G. M.
A1  - Possen, P. von
A1  - Sagefka, T.
T1  - BIG KARL and COSY
T2  - The art and science of magnet design. A Festschrift in honor of Klaus Halbach. Vol. 1
Y1  - 1995
SP  - 19
EP  - 28
PB  - Lawrence Berkeley Lab., Univ. of California
CY  - Berkeley, CA.
ER  - 
TY  - CHAP
A1  - Stollenwerk, Dominik
A1  - Rieke, Christian
A1  - Dahmen, Markus
A1  - Pieper, Martin
T1  - Biogas Production Modelling : A Control System Engineering Approach
T2  - IOP Conference Series: Earth and Environmental Science. Bd. 32
Y1  - 2016
U6  - https://doi.org/10.1088/1755-1315/32/1/012008
SN  - 1755-1315
N1  - ICARET 2016, International Conference on Advances in Renewable Energy and Technologies, Putrajaya, MY, Feb 23-25, 2016
SP  - 012008/1
EP  - 012008/4
ER  - 
TY  - JOUR
A1  - Rateike, Franz-Matthias
A1  - Siebourg, W.
A1  - Schmid, H.
A1  - Anders, S.
T1  - Birefringence - An important property of plastic substrates for magneto-optical storage disks / W. Siebourg ;  H. Schmid ;  F. M. Rateike ; S. Anders ; U. Grigo ; H. Löwer
JF  - Polymer engineering & science / Society of Plastics Engineers. 30 (1990), H. 18
Y1  - 1990
SN  - 0032-3888
SP  - 1133
EP  - 1139
ER  - 
TY  - CHAP
A1  - Tomic, Igor
A1  - Penna, Andrea
A1  - DeJong, Matthew
A1  - Butenweg, Christoph
A1  - Senaldi, Ilaria
A1  - Guerrini, Gabriele
A1  - Malomo, Daniele
A1  - Beyer, Katrin
T1  - Blind predictions of shake table testing of aggregate masonry buildings
T2  - Proceedings of the 17th World Conference on Earthquake Engineering
N2  - In many historical centers in Europe, stone masonry is part of building aggregates, which developed when the layout of the city or village was densified. The analysis of such building aggregates is very challenging and modelling guidelines missing. Advances in the development of analysis methods have been impeded by the lack of experimental data on the seismic response of such aggregates. The SERA project AIMS (Seismic Testing of Adjacent Interacting Masonry Structures) provides such experimental data by testing an aggregate of two buildings under two horizontal components of dynamic excitation. With the aim to advance the modelling of unreinforced masonry aggregates, a blind prediction competition is organized before the experimental campaign. Each group has been provided a complete set of construction drawings, material properties, testing sequence and the list of measurements to be reported. The applied modelling approaches span from equivalent frame models to Finite Element models using shell elements and discrete element models with solid elements. This paper compares the first entries, regarding the modelling approaches, results in terms of base shear, roof displacements, interface openings, and the failure modes.
KW  - Historical centres
KW  - Stone masonry
KW  - Adjacent buildings
KW  - Shake table test
KW  - Blind prediction competition
Y1  - 2020
N1  - 17th World Conference on Earthquake Engineering, Sendai, Japan, September 27 to October 2, 2021
N1  - (Die Konferenz war ursprünglich für den 13-18 September 2020 angesetzt)
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sesov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - Boundary effects on seismic analysis of multi-storey frames considering soil structure interaction phenomenon
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed
Y1  - 2014
SN  - 978-3-658-02809-1 (Print) ; 978-3-658-02810-7
U6  - https://doi.org/10.1007/978-3-658-02810-7_47
SP  - 569
EP  - 576
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Berg, Tobias
A1  - Leicht-Scholten, Carmen
T1  - Breaking the habit – new approaches in engineering education
T2  - Proceedings of the 43rd Annual Conference of the European Society for Engineering Education
N2  - Within the framework of the project a genderand diversity-oriented teaching evaluation and modern, media-supported blended learning approaches were used in order to achieve the intended goals. First research results of the literature and status quo analysis were already implemented and tested in newly designed teaching approaches, for example in a multidisciplinary introductory lecture of civil engineering at RWTH Aachen University.
KW  - teaching
KW  - engineering education
KW  - gender and diversity
KW  - best practice
Y1  - 2015
SN  - 978-2-87352-012-0
N1  - Annual Conference of the European Society for Engineering Education , Orléans , France , SEFI , 2015-06-29 - 2015-07-02
ER  - 
TY  - CHAP
A1  - Gorzalka, Philip
A1  - Dahlke, Dennis
A1  - Göttsche, Joachim
A1  - Israel, Martin
A1  - Patel, Dhruvkumar
A1  - Prahl, Christoph
A1  - Schmiedt, Jacob Estevam
A1  - Frommholz, Dirk
A1  - Hoffschmidt, Bernhard
A1  - Linkiewicz, Magdalena
T1  - Building Tomograph–From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input
T2  - EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria
Y1  - 2018
ER  - 
TY  - JOUR
A1  - Kern, Alexander
A1  - Schelthoff, Christof
A1  - Mathieu, Moritz
T1  - Calculation of interception efficiencies for airterminations using a dynamic electro-geometrical  model
Y1  - 2011
N1  - XI International Symposium on Lightning Protection (SIPDA), Fortaleza (Brasilien), 2011.
SP  - 1
EP  - 6
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Schelthoff, Christof
A1  - Mathieu, Moritz
T1  - Calculation of interception efficiencies for mesh-type air-terminations according to IEC 62305-3 using a dynamic electro-geometrical model
T2  - International Conference on Lightning Protection (ICLP) : 2 - 7 Sept. 2012, Vienna
Y1  - 2012
SN  - 978-1-4673-1896-9 (E-Book) ; 978-1-4673-1898-3 (Print)
SP  - 1
EP  - 6
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Pfundt, H.
A1  - Vogelsang, D.
A1  - Gerling, Ulrich
T1  - Calculation of the crust profile in aluminium reduction cells by thermal computer modelling
T2  - Light metals 1989 : 118th annual meeting of the Minerals, Metals and Materials Society, Las Vegas, NV, Feb. 27 - Mar. 03. 1989
Y1  - 1988
SP  - 371
EP  - 377
PB  - Minerals, Metals and Materials Soc.
CY  - Warrendale, Pa.
ER  - 
TY  - JOUR
A1  - Kern, Alexander
A1  - Wiesinger, J.
A1  - Zischank, Wolfgang J.
T1  - Calculation of the longitudinal voltage along metal tubes caused by lightning currents and protection measures
JF  - Seventh International Symposium on High Voltage Engineering : Dresden, August 26 - 30 1991
Y1  - 1991
N1  - International Symposium on High Voltage Engineering <7, 1991, Dresden>
PB  - Techn. Univ.
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Helsper, Christoph
A1  - Fißan, H. J.
A1  - Kasper, W.
T1  - Calibration of Optical Particle Counters with Respect to Particle Size / Fißan, H. J. ; Helsper, C.; Kasper, W.
JF  - Particle and Particle Systems Characterization. 1 (1984), H. 1984
Y1  - 1984
SN  - 1521-4117
SP  - 108
EP  - 111
ER  - 
TY  - JOUR
A1  - Helsper, Christoph
A1  - Fißan, H. J.
T1  - Calibration of the Polytec HC-15 and HC-70 Optical Particle Counters / Fißan, H. J. ; Helsper, C.
JF  - Aerosols in the mining and industrial work environments, Vol. 3. Instrumentation, Marple, Virgil A. ; Liu, Benjamin Y.
Y1  - 1983
N1  - International Symposium on Aerosols in the Mining and Industrial Work Environment ; (1981.11.01-06 : ; Minneapolis/Minn.)
SP  - 825
EP  - 829
PB  - Ann Arbor Science
CY  - Ann Arbor, Mich.
ER  - 
TY  - CHAP
A1  - Hinke, Christian
A1  - Vervier, Luisa
A1  - Brauner, Philipp
A1  - Schneider, Sebastian
A1  - Steuer-Dankert, Linda
A1  - Ziefle, Martina
A1  - Leicht-Scholten, Carmen
T1  - Capability configuration in next generation manufacturing
T2  - Forecasting next generation manufacturing :  digital shadows, human-machine collaboration, and data-driven business models
N2  - Industrial production systems are facing radical change in multiple dimensions. This change is caused by technological developments and the digital transformation of production, as well as the call for political and social change to facilitate a transformation toward sustainability. These changes affect both the capabilities of production systems and companies and the design of higher education and educational programs. Given the high uncertainty in the likelihood of occurrence and the technical, economic, and societal impacts of these concepts, we conducted a technology foresight study, in the form of a real-time Delphi analysis, to derive reliable future scenarios featuring the next generation of manufacturing systems. This chapter presents the capabilities dimension and describes each projection in detail, offering current case study examples and discussing related research, as well as implications for policy makers and firms. Specifically, we discuss the benefits of capturing expert knowledge and making it accessible to newcomers, especially in highly specialized industries. The experts argue that in order to cope with the challenges and circumstances of today’s world, students must already during their education at university learn how to work with AI and other technologies. This means that study programs must change and that universities must adapt their structural aspects to meet the needs of the students.
Y1  - 2022
SN  - 978-3-031-07733-3
U6  - https://doi.org/10.1007/978-3-031-07734-0_6
SP  - 95
EP  - 106
PB  - Springer
CY  - Cham
ER  -