TY  - JOUR
A1  - Sander, Volker
A1  - Foster, Ian T.
A1  - Fidler, Markus
A1  - Roy, Alain
T1  - End-to-end quality of service for high-end applications / Foster, Ian T. ; Fidler, Markus ; Roy, Alain ; Sander, Volker ; Winkler, Linda
JF  - Computer Communications. 27 (2004), H. 14
Y1  - 2004
SN  - 0140-3664
SP  - 1375
EP  - 1388
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Baier, M.
T1  - Energetic and operational use of FlexCargoRail freight wagons in the single wagon load traffic / Baier, M. ; Enning, M.
JF  - Towards zero emission : EVS 24, the 24th  International  Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Stavanger, Norway, May 13 - 16, 2009 ; symposium proceedings / organised by AVERE ... Robert Stüssi [Hrsg.]
Y1  - 2009
N1  - European Association of Electric Road Vehicles ; EVS ; (24 : ; 2009.05.13-16 : ; Stavanger)
CY  - Stavanger
ER  - 
TY  - JOUR
A1  - Göttsche, Joachim
A1  - Gabrysch, K.
A1  - Schiller, H.
A1  - Kauert, B.
A1  - Schwarzer, Klemens
T1  - Energetic Effects of demand – controlled ventilation retrofitting in a biochemical laboratory building
JF  - AIVC publications [Elektronische Ressource] / Air Infiltration and Ventilation Centre
Y1  - 2004
N1  - AIVC Conference <25, Prague, 2004>
SP  - 50
PB  - INIVE EEIG
CY  - Brussels
ER  - 
TY  - BOOK
A1  - Wosnitza, Franz
A1  - Hilgers, Hans Gerd
T1  - Energieeffizienz und Energiemanagement : ein Überblick heutiger Möglichkeiten und Notwendigkeiten
Y1  - 2012
SN  - 978-3-8348-1941-3
N1  - eISBN 978-3-8348-8671-2
PB  - Springer Spektrum
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Wiegner, Jonas
A1  - Volker, Hanno
A1  - Mainz, Fabian
A1  - Backes, Andreas
A1  - Loeken, Michael
A1  - Hüning, Felix
T1  - Energy analysis of a wireless sensor node powered by a Wiegand sensor
JF  - Journal of Sensors and Sensor Systems (JSSS)
N2  - This article describes an Internet of things (IoT) sensing device with a wireless interface which is powered by the energy-harvesting method of the Wiegand effect. The Wiegand effect, in contrast to continuous sources like photovoltaic or thermal harvesters, provides small amounts of energy discontinuously in pulsed mode. To enable an energy-self-sufficient operation of the sensing device with this pulsed energy source, the output energy of the Wiegand generator is maximized. This energy is used to power up the system and to acquire and process data like position, temperature or other resistively measurable quantities as well as transmit these data via an ultra-low-power ultra-wideband (UWB) data transmitter. A proof-of-concept system was built to prove the feasibility of the approach. The energy consumption of the system during start-up was analysed, traced back in detail to the individual components, compared to the generated energy and processed to identify further optimization options. Based on the proof of concept, an application prototype was developed.
Y1  - 2023
U6  - https://doi.org/10.5194/jsss-12-85-2023
SN  - 2194-878X
N1  - Corresponding author: Felix Hüning
VL  - 12
IS  - 1
SP  - 85
EP  - 92
PB  - Copernicus Publ.
CY  - Göttingen
ER  - 
TY  - RPRT
A1  - Feldmann, M.
A1  - Kuhnhenne, M.
A1  - Döring, Bernd
A1  - Pyschny, D.
A1  - Lawson, R.M.
A1  - Chuter, R.D.
A1  - Boudjabeur, S.
A1  - Lecomte-Labory, F.
A1  - Airaksinen, M.
A1  - Heikkinen, J.
A1  - Laamanen, J.
A1  - Albart, P.
A1  - D'Haeyer, R.
A1  - Chica, J.A.
A1  - Maseda, J.M.
A1  - Amundarain, A.
A1  - Rips, M.O.
A1  - Nuñez, J.A.
A1  - Macías, O.
A1  - Beguin, P.
A1  - Ben Larbi, A.
T1  - Energy and thermal improvements for construction in steel (ETHICS) - EUR 26010
N2  - ETHICS is concerned with evaluating, measuring and making improvements in the thermal and energy performance of steel-clad and steel-framed buildings. It addresses basic building physics performance at a laboratory and full-scale level, and the preparation of design guidance for commercial, industrial and residential buildings. It includes the development of design tools to assist users in assessing whole-building performance, and calibrates these tools against whole-building measurements, which will be obtained from this research. Opportunities for renewable energy and other energy-saving features will be assessed. This project focuses on objectives that are of particular interest for the design of new steel constructions regarding energy efficiency. ETHICS investigates the as-built performance by on-site tests regarding air tightness and heat transfer properties of the building envelope and by monitoring the energy consumption and thermal comfort of selected up-to-date steel buildings. As energy efficiency is a key requirement for design and construction of buildings in the future, this project provides well-founded scientific data, which prove the high energy performance of current steel constructions and work out details for further improvements to maintain and extend the position of steel products in the construction sector.
KW  - steel
KW  - metal structure
KW  - building technique
KW  - energy efficiency
KW  - thermal insulation
KW  - industrial research
KW  - research report
Y1  - 2013
SN  - 978-92-79-30789-8
U6  - https://doi.org/10.2777/17106
SN  - 1831-9424
PB  - Publications Office of the European Union
CY  - Luxembourg
ER  - 
TY  - JOUR
A1  - Valero, Daniel
A1  - Bung, Daniel Bernhard
A1  - Crookston, B.M.
T1  - Energy dissipation of a Type III basin under design and adverse conditions for stepped and smooth spillways
JF  - Journal of Hydraulic Engineering
N2  - New information regarding the influence of a stepped chute on the hydraulic performance of the United States Bureau of Reclamation (Reclamation) Type III hydraulic jump stilling basin is presented for design (steady) and adverse (decreasing tailwater) conditions. Using published experimental data and computational fluid dynamics (CFD) models, this paper presents a detailed comparison between smooth-chute and stepped-chute configurations for chute slopes of 0.8H:1V and 4H:1V and Froude numbers (F) ranging from 3.1 to 9.5 for a Type III basin designed for F = 8. For both stepped and smooth chutes, the relative role of each basin element was quantified, up to the most hydraulic extreme case of jump sweep-out. It was found that, relative to a smooth chute, the turbulence generated by a stepped chute causes a higher maximum velocity decay within the stilling basin, which represents an enhancement of the Type III basin’s performance but also a change in the relative role of the basin elements. Results provide insight into the ability of the CFD models [unsteady Reynolds-averaged Navier-Stokes (RANS) equations with renormalization group (RNG) k-ϵ turbulence model and volume-of-fluid (VOF) for free surface tracking] to predict the transient basin flow structure and velocity profiles. Type III basins can perform adequately with a stepped chute despite the effects steps have on the relative role of each basin element. It is concluded that the classic Type III basin design, based upon methodology by reclamation specific to smooth chutes, can be hydraulically improved for the case of stepped chutes for design and adverse flow conditions using the information presented herein.
Y1  - 2018
U6  - https://doi.org/10.1061/(ASCE)HY.1943-7900.0001482
SN  - 0733-9429
N1  - Article number 04018036
VL  - 144
IS  - 7
PB  - ASCE
CY  - Reston, Va.
ER  - 
TY  - JOUR
A1  - Kerpen, Nils B.
A1  - Bung, Daniel Bernhard
A1  - Valero, Daniel
A1  - Schlurmann, Torsten
T1  - Energy dissipation within the wave run-up at stepped revetments
JF  - Journal of Ocean University of China
Y1  - 2017
U6  - https://doi.org/10.1007/s11802-017-3355-z
SN  - 1993-5021
VL  - 16
IS  - 4
SP  - 649
EP  - 654
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Kerpen, Nils B.
A1  - Bung, Daniel Bernhard
A1  - Valero, Daniel
A1  - Schlurmann, Torsten
T1  - Energy dissipation within the wave run-up at stepped revetments
T2  - 8th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering, Qingdao, China
KW  - energy disspation
KW  - wave run-up
KW  - friction
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Kuhnhenne, Markus
A1  - Döring, Bernd
A1  - Pyschny, Dominik
A1  - Feldmann, Markus
T1  - Energy efficient sandwich construction
T2  - Proceedings of the VI International Congress on Architectural Envelopes : 20.6. - 22.6.2012, San Sebastian, Spain
Y1  - 2012
SP  - 277
EP  - 285
PB  - ICAE
ER  - 
TY  - JOUR
A1  - Hillen, Walter
T1  - Energy scan for narrow states in e+e&#8722; annihilation at C.M. energies between 29.90 and 31.46 GeV. TASSO Collaboration
JF  - Physics Letters B. 88 (1979), H. 1-2
Y1  - 1979
SN  - 0370-2693
SP  - 199
EP  - 202
ER  - 
TY  - CHAP
A1  - Meliß, Michael
A1  - Neskakis, A.
A1  - Usbeck, S.
A1  - Wagner, L.
A1  - Wiediger, Jürgen
T1  - Energy supply by coupled solar systems for decentralized application
T2  - Harmony with nature : : proceedings / ISES Solar World Congress, Budapest 1993. International Solar Energy Society, Hungarian Section (H-ISES); Hungarian Solar Energy Society (HSES). Vol. 8: Biomass, agriculture, wind
Y1  - 1993
SP  - 343
EP  - 348
PB  - Hungarian Energy Society
CY  - Budapest
ER  - 
TY  - CHAP
A1  - Leise, Philipp
A1  - Altherr, Lena
A1  - Pelz, Peter F.
T1  - Energy-Efficient design of a water supply system for skyscrapers by mixed-integer nonlinear programming
T2  - Operations Research Proceedings 2017
N2  - The energy-efficiency of technical systems can be improved by a systematic design approach. Technical Operations Research (TOR) employs methods known from Operations Research to find a global optimal layout and operation strategy of technical systems. We show the practical usage of this approach by the systematic design of a decentralized water supply system for skyscrapers. All possible network options and operation strategies are modeled by a Mixed-Integer Nonlinear Program. We present the optimal system found by our approach and highlight the energy savings compared to a conventional system design.
KW  - Engineering optimization
KW  - Global optimization
KW  - Energy efficiency
KW  - Water
KW  - Network
Y1  - 2018
SN  - 978-3-319-89919-0
U6  - https://doi.org/10.1007/978-3-319-89920-6_63
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Dahl, Günter
A1  - Suttrop, F.
T1  - Engine control and low-NO(x) combustion for hydrogen fuelled aircraft gas turbines
JF  - International Journal of Hydrogen Energy. 23 (1998), H. 8
Y1  - 1998
SN  - 0360-3199
SP  - 695
EP  - 704
ER  - 
TY  - JOUR
A1  - Kearney, David W.
A1  - Kelly, Bruce
A1  - Herrmann, Ulf
A1  - Cable, R.
A1  - Pacheco, J.
A1  - Mahoney, R.
A1  - Price, Henry
A1  - Blake, D.
A1  - Nava, P.
A1  - Potrovitza, N.
T1  - Engineering Aspects of a Molten Salt Heat Transfer Fluid in a Trough Solar Field
JF  - Energy : the international journal
Y1  - 2002
U6  - https://doi.org/10.1016/S0360-5442(03)00191-9
SN  - 0360-5442
N1  - SolarPACES 2002, Zürich, Switzerland, 4–6 September 2002
VL  - 29
IS  - 5-6 (Special Issue SolarPaces)
SP  - 861
EP  - 870
ER  - 
TY  - THES
A1  - Reyes Ochoa, Leonel
T1  - Engineering aspects of a parabolic trough collector field with direct steam generation and an organic rankine cycle
Y1  - 2014
N1  - Aachen, Fachhochsch., Masterarbeit, 2014
PB  - Fachhochschule Aachen
CY  - Aachen
ER  - 
TY  - GEN
A1  - Staat, Manfred
T1  - Engineering Mechanics. Lecture Notes. 2nd edition, translation of the 3rd corrected and extended German edition of "Technische Mechanik"
N2  - English translation of the corrected lectures notes of Sebastian Krämer. Contents 0 Introduction to Mechanics 1 Statics of Rigid Bodies 2 Elastostatics (Strength of Materials) 3 Kinematics 4 Kinetics Literature
KW  - Technische Mechanik
KW  - Mechanics
KW  - Statics
KW  - Elastostatics
KW  - Kinematics
KW  - Kinetics
Y1  - 2006
ER  - 
TY  - GEN
A1  - Ingebrandt, Sven
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Engineering of functional interfaces / guest eds. Sven Ingebrandt ; Patrick Wagner ; Michael J. Schöning
T2  - Physica Status Solidi (A)
Y1  - 2013
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - Vol. 210
IS  - Iss. 5
SP  - 845
ER  - 
TY  - JOUR
A1  - Wagner, Patrick
A1  - Doll, Theodor
A1  - Schöning, Michael Josef
T1  - Engineering of functional interfaces / Patrick Wagner ; Theodor Doll ; Michael J. Schöning (eds.)
JF  - Physica status solidi (A) : Applications and materials science
Y1  - 2014
U6  - https://doi.org/10.1002/pssa.201470241
SN  - 1521-396X (E-Book); 1862-6319 (E-Book); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1339
EP  - 1339
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Doll, Theodor
A1  - Wagner, Torsten
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Engineering of functional interfaces / Theodor Doll ; Torsten Wagner ; Patrick Wagner ; Michael J. Schöning (eds.)
JF  - Physica status solidi (a)
Y1  - 2016
U6  - https://doi.org/10.1002/pssa.201670641
SN  - 1862-6319
VL  - 213
IS  - 6
SP  - 1393
EP  - 1394
PB  - Wiley-VCH
CY  - Weinheim
ER  -