TY  - JOUR
A1  - Mourzina, I.G.
A1  - Yoshinobu, T.
A1  - Ermolenko, Y.E.
A1  - Vlasov, Y. G.
A1  - Schöning, Michael Josef
A1  - Iwasaki, H.
T1  - Immobilization of urease and cholinesterase on the surface of semiconductor transducer for the development of light-addressable potentiometric sensors
JF  - Technical digest of the 10th International Meeting on Chemical Sensors, July 11 - 14, 2004, Tsukuba, Japan / Japan Association of Chemical Sensors
Y1  - 2004
N1  - Chemical sensors ; 20.2004 Suppl. B. IMCS ; (10, 2004, Tsukuba) ; International Meeting on Chemical Sensors ; (10 : ; 2004.07.11-14 : ; Tsukuba)
SP  - 788
EP  - 789
PB  - Japan Association of Chemical Sensors
CY  - Fukuoka
ER  - 
TY  - JOUR
A1  - Mourzina, Ioulia G.
A1  - Yoshinobu, Tatsuo
A1  - Ermolenko, Yuri E.
A1  - Vlasov, Yuri G.
A1  - Schöning, Michael Josef
A1  - Iwasaki, H.
T1  - Immobilization of urease and cholinesterase on the surface of semiconductor transducer for the development of lightaddressable potentiometric sensors
JF  - Microchimica Acta. 144 (2004), H. 1-3
Y1  - 2004
SN  - 0026-3672
SP  - 41
EP  - 50
ER  - 
TY  - JOUR
A1  - Bogoyavlenskiy, A. P.
A1  - Berezin, V. E.
A1  - Ogneva, A. V.
A1  - Tolmacheva, V. P.
A1  - Digel, Ilya
A1  - Khudyakova, S. S.
T1  - Immunostimulating activity of a saponin-containing extract of Saponaria officinalis
JF  - Voprosy virusologii
Y1  - 1999
SN  - 0507-4088
VL  - 44
IS  - 5
SP  - 229
EP  - 232
ER  - 
TY  - CHAP
A1  - Kahmann, Stephanie
A1  - Hackl, Michael
A1  - Wegmann, Kilian
A1  - Müller, Lars-Peter
A1  - Staat, Manfred
ED  - Erni, Daniel
T1  - Impact of a proximal radial shortening osteotomy on the distribution of forces and the stability of the elbow
T2  - 1st YRA MedTech Symposium 2016 : April 8th / 2016 / University of Duisburg-Essen
N2  - The human arm consists of the humerus (upper arm), the medial ulna and the lateral radius (forearm). The joint between the humerus and the ulna is called humeroulnar joint and the joint between the humerus and the radius is called humeroradial joint. Lateral and medial collateral ligaments stabilize the elbow. Statistically, 2.5 out of 10,000 people suffer from radial head fractures [1]. In these fractures the cartilage is often affected. Caused by the injured cartilage, degenerative diseases like posttraumatic arthrosis may occur. The resulting pain and reduced range of motion have an impact on the patient’s quality of life. Until now, there has not been a treatment which allows typical loads in daily life activities and offers good long-term results. A new surgical approach was developed with the motivation to reduce the progress of the posttraumatic arthrosis. Here, the radius is shortened by 3 mm in the proximal part [2]. By this means, the load of the radius is intended to be reduced due to a load shift to the ulna. Since the radius is the most important stabilizer of the elbow it has to be confirmed that the stability is not affected. In the first test (Fig. 1 left), pressure distributions within the humeroulnar and humeroradial joints a native and a shortened radius were measured using resistive pressure sensors (I5076 and I5027, Tekscan, USA). The humerus was loaded axially in a tension testing machine (Z010, Zwick Roell, Germany) in 50 N steps up to 400 N. From the humerus the load is transmitted through both the radius and the ulna into the hand which is fixed on the ground. In the second test (Fig. 1 right), the joint stability was investigated using a digital image correlation system to measure the displacement of the ulna. Here, the humerus is fixed with a desired flexion angle and the unconstrained forearm lies on the ground. A rope connects the load actuator with a hook fixed in the ulna. A guide roller is used so that the rope pulls the ulna horizontally when a tensile load is applied. This creates a moment about the elbow joint with a maximum value of 7.5 Nm. Measurements were performed with varying flexion angles (0°, 30°, 60°, 90°, 120°). For both tests and each measurement, seven specimens were used. Student ́s t-test was employed to determine whether the mean values of the measurements in native specimen and operated specimens differ significantly.
Y1  - 2016
U6  - https://doi.org/10.17185/duepublico/40821
SP  - 7
EP  - 8
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - JOUR
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Battery Performance on the Initial Sizing of Hybrid-Electric General Aviation Aircraft
JF  - Journal of Aerospace Engineering
N2  - Studies suggest that hybrid-electric aircraft have the potential to generate fewer emissions and be inherently quieter when compared to conventional aircraft. By operating combustion engines together with an electric propulsion system, synergistic benefits can be obtained. However, the performance of hybrid-electric aircraft is still constrained by a battery’s energy density and discharge rate. In this paper, the influence of battery performance on the gross mass for a four-seat general aviation aircraft with a hybrid-electric propulsion system is analyzed. For this design study, a high-level approach is chosen, using an innovative initial sizing methodology to determine the minimum required aircraft mass for a specific set of requirements and constraints. Only the peak-load shaving operational strategy is analyzed. Both parallel- and serial-hybrid propulsion configurations are considered for two different missions. The specific energy of the battery pack is varied from 200 to 1,000 W⋅h/kg, while the discharge time, and thus the normalized discharge rating (C-rating), is varied between 30 min (2C discharge rate) and 2 min (30C discharge rate). With the peak-load shaving operating strategy, it is desirable for hybrid-electric aircraft to use a light, low capacity battery system to boost performance. For this case, the battery’s specific power rating proved to be of much higher importance than for full electric designs, which have high capacity batteries. Discharge ratings of 20C allow a significant take-off mass reduction aircraft. The design point moves to higher wing loadings and higher levels of hybridization if batteries with advanced technology are used.
Y1  - 2020
U6  - https://doi.org/10.1061/(ASCE)AS.1943-5525.0001113
SN  - 1943-5525
VL  - 33
IS  - 3
PB  - ASCE
CY  - Reston, Va.
ER  - 
TY  - CHAP
A1  - Schwager, Christian
A1  - Angele, Florian
A1  - Nouri, Bijan
A1  - Schwarzbözl, Peter
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Impact of DNI forecast quality on performance prediction for a commercial scale solar tower: Application of nowcasting DNI maps to dynamic solar tower simulation
T2  - SolarPACES 2022 conference proceedings
N2  - Concerning current efforts to improve operational efficiency and to lower overall costs of concentrating solar power (CSP) plants with prediction-based algorithms, this study investigates the quality and uncertainty of nowcasting data regarding the implications for process predictions. DNI (direct normal irradiation) maps from an all-sky imager-based nowcasting system are applied to a dynamic prediction model coupled with ray tracing. The results underline the need for high-resolution DNI maps in order to predict net yield and receiver outlet temperature realistically. Furthermore, based on a statistical uncertainty analysis, a correlation is developed, which allows for predicting the uncertainty of the net power prediction based on the corresponding DNI forecast uncertainty. However, the study reveals significant prediction errors and the demand for further improvement in the accuracy at which local shadings are forecasted.
KW  - Process prediction
KW  - DNI forecasting
KW  - Nowcasting
KW  - Uncertainty analysis
KW  - Molten salt receiver system,
Y1  - 2024
U6  - https://doi.org/10.52825/solarpaces.v1i.675
SN  - 2751-9899 (online)
N1  - SolarPACES 2022, 28th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27-30 September, Albuquerque, NM, USA
IS  - 1
PB  - TIB Open Publishing
CY  - Hannover
ER  - 
TY  - JOUR
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of electric propulsion technology and mission requirements on the performance of VTOL UAVs
JF  - CEAS Aeronautical Journal
N2  - One of the engineering challenges in aviation is the design of transitioning vertical take-off and landing (VTOL) aircraft. Thrust-borne flight implies a higher mass fraction of the propulsion system, as well as much increased energy consumption in the take-off and landing phases. This mass increase is typically higher for aircraft with a separate lift propulsion system than for aircraft that use the cruise propulsion system to support a dedicated lift system. However, for a cost–benefit trade study, it is necessary to quantify the impact the VTOL requirement and propulsion configuration has on aircraft mass and size. For this reason, sizing studies are conducted. This paper explores the impact of considering a supplemental electric propulsion system for achieving hovering flight. Key variables in this study, apart from the lift system configuration, are the rotor disk loading and hover flight time, as well as the electrical systems technology level for both batteries and motors. Payload and endurance are typically used as the measures of merit for unmanned aircraft that carry electro-optical sensors, and therefore the analysis focuses on these particular parameters.
Y1  - 2018
U6  - https://doi.org/10.1007/s13272-018-0352-x
SN  - 1869-5582 print
SN  - 1869-5590 online
VL  - 10
IS  - 3
SP  - 843
PB  - Springer
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Engine Failure Constraints on the Initial Sizing of Hybrid-Electric GA Aircraft
T2  - AIAA Scitech 2019 Forum
Y1  - 2019
U6  - https://doi.org/10.2514/6.2019-1812
N1  - AIAA Scitech Forum, 2019; San Diego; United States; 7 January 2019 through 11 January 2019
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - McDonald, Malcolm
A1  - McInnes, Colin R.
A1  - Mengali, Giovanni
T1  - Impact of Optical Degradation on Solar Sail Mission Performance
JF  - Journal of Spacecraft and Rockets. 44 (2007), H. 4
Y1  - 2007
SN  - 0022-4650
N1  - 2. ISSN: 1533-6794
SP  - 740
EP  - 749
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Propulsion Technology Levels on the Sizing and Energy Consumption for Serial HybridElectric General Aviation Aircraft
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Auth, Gunnar
A1  - Czarnecki, Christian
A1  - Bensberg, Frank
ED  - Draude, Claude
ED  - Lange, Martin
ED  - Sick, Bernhard
ED  - Gesellschaft für Informatik e.V. (GI), 
T1  - Impact of robotic process automation on enterprise architectures
T2  - GI Edition Proceedings Band 295 INFORMATIK 2019, Workshop-Beiträge
N2  - The initial idea of Robotic Process Automation (RPA) is the automation of business processes through the presentation layer of existing application systems. For this simple emulation of user input and output by software robots, no changes of the systems and architecture is required. However, considering strategic aspects of aligning business and technology on an enterprise level as well as the growing capabilities of RPA driven by artificial intelligence, interrelations between RPA and Enterprise Architecture (EA) become visible and pose new questions. In this paper we discuss the relationship between RPA and EA in terms of perspectives and implications. As workin- progress we focus on identifying new questions and research opportunities related to RPA and EA.
KW  - Robotic Process Automation
KW  - Enterprise Architecture
KW  - Software Robots
Y1  - 2019
SN  - 9783885796893
U6  - https://doi.org/10.18420/inf2019_ws05
SN  - 1617-5468
N1  - 50 Jahre Gesellschaft für Informatik – Informatik für Gesellschaft. 16. September, Kassel
SP  - 59
EP  - 65
PB  - Köllen
CY  - Bonn
ER  - 
TY  - JOUR
A1  - Böhnert, Arno
A1  - Blaschke, Florian
A1  - Biewendt, Marcel
T1  - Impact of sustainability on the strategic direction of luxury companies
JF  - European Journal of Marketing and Economics
N2  - Today’s society is undergoing a paradigm shift driven by the megatrend of sustainability. This undeniably affects all areas of Western life. This paper aims to find out how the luxury industry is dealing with this change and what adjustments are made by the companies. For this purpose, interviews were conducted with managers from the luxury industry, in which they were asked about specific measures taken by their companies as well as trends in the industry. In a subsequent evaluation, the trends in the luxury industry were summarized for the areas of ecological, social, and economic sustainability. It was found that the area of environmental sustainability is significantly more focused than the other sub-areas. Furthermore, the need for a customer survey to validate the industry-based measures was identified.
KW  - Operations
KW  - Brands
KW  - Luxury
KW  - Change
Y1  - 2022
SN  - 2601-8659
VL  - 6
IS  - 1
SP  - 70
EP  - 85
PB  - Revistia
CY  - London
ER  - 
TY  - JOUR
A1  - Weber, Hans-Joachim
A1  - Hekmat, K.
A1  - Zimmermann, T.
A1  - Kampe, S.
T1  - Impact of tranexamic acid vs. aprotinin on blood loss and transfusion requirements after cardiopulmonary bypass: a prospective, randomised, double-blind trial / Hekmat, K. ; Zimmermann, T. ; Kampe, S. ; Kasper, S. M. ; Weber, H. J. ; Geissler, H. J. ; Meh
JF  - Current Medical Research and Opinion. 20 (2004), H. 1
Y1  - 2004
SN  - 0300-7995
SP  - 121
EP  - 126
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Mai, D.-T.
A1  - Mourzina, Y.
A1  - Schöning, Michael Josef
T1  - Impedance effect of an ion-sensitive membrane: characterisation of an EMIS sensor by impedance spectroscopy, capacitance-voltage and constant-capacitance method
JF  - Sensors and Actuators B. 103 (2004), H. 1-2
Y1  - 2004
SN  - 0925-4005
SP  - 423
EP  - 428
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Leinhos, Marcel
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Impedance spectroscopy: A tool for real-time in situ monitoring of the degradation of biopolymers
JF  - Physica Status Solidi (A)
N2  - Investigation of the degradation kinetics of biodegradable polymers is essential for the development of implantable biomedical devices with predicted biodegradability. In this work, an impedimetric sensor has been applied for real-time and in situ monitoring of degradation processes of biopolymers. The sensor consists of two platinum thin-film electrodes covered by a polymer film to be studied. The benchmark biomedical polymer poly(D,L-lactic acid) (PDLLA) was used as a model system. PDLLA films were deposited on the sensor structure from a polymer solution by using the spin-coating method. The degradation kinetics of PDLLA films have been studied in alkaline solutions of pH 9 and 12 by means of an impedance spectroscopy (IS) method. Any changes in a polymer capacitance/resistance induced by water uptake and/or polymer degradation will modulate the global impedance of the polymer-covered sensor that can be used as an indicator of the polymer degradation. The degradation rate can be evaluated from the time-dependent impedance spectra. As expected, a faster degradation has been observed for PDLLA films exposed to pH 12 solution.
Y1  - 2013
U6  - https://doi.org/10.1002/pssa.201200941
SN  - 1521-396X ; 0031-8965
VL  - 210
IS  - 5
SP  - 905
EP  - 910
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Arreola, Julio
A1  - Hansen, Christina
A1  - Greeff, Anton
A1  - Mayer, Marlena
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Impedimetric Biosensor to Enable Fast Evaluation of Gaseous Sterilization Processes
T2  - MDPI Proceedings
Y1  - 2017
U6  - https://doi.org/10.3390/proceedings1040435
N1  - Eurosensors 2017 Conference, Paris, France, 3–6 September 2017
VL  - 1
IS  - 4
ER  - 
TY  - JOUR
A1  - Riedel, Marc
A1  - Kartchemnik, Julia
A1  - Schöning, Michael Josef
A1  - Lisdat, Fred
T1  - Impedimetric DNA detection – steps forward to sensorial application
JF  - Analytical chemistry
N2  - This study describes a label-free impedimetric sensor based on short ssDNA recognition elements for the detection of hybridization events. We concentrate on the elucidation of the influence of target length and recognition sequence position on the sensorial performance. The impedimetric measurements are performed in the presence of the redox system ferri-/ferrocyanide and show an increase in charge transfer resistance upon hybridization of ssDNA to the sensor surface. Investigations on the impedimetric signal stability demonstrate a clear influence of the buffers used during the sensor preparation and the choice of the passivating mercaptoalcanol compound. A stable sensor system has been developed, enabling a reproducible detection of 25mer target DNA in the low nanomolar range. After hybridization, a sensor regeneration can be reached with deionized water by adjustment of effective convection conditions, ensuring a sensor reusability. By investigations of longer targets with overhangs exposed to the solution, we can demonstrate applicability of the impedimetric detection for longer ssDNA. However, a decreasing charge transfer resistance change (ΔRct) is found by extending the overhang. As a strategy to increase the impedance change for longer target strands, the position of the recognition sequence can be designed in a way that a small overhang is exposed to the electrode surface. This is found to result in an increase in the relative Rct change. These results suggest that DNA and consequently negative charge near the electrode possess a larger impact on the impedimetric signal than DNA further away.
Y1  - 2014
U6  - https://doi.org/10.1021/ac501800q
SN  - 1520-6882 (E-Journal); 0003-2700 (Print); 0096-4484 (Print)
VL  - 86 (2014)
IS  - 15
SP  - 7867
EP  - 7874
PB  - ACS Publications
CY  - Columbus
ER  - 
TY  - JOUR
A1  - Delle, Lotta E.
A1  - Huck, Christina
A1  - Bäcker, Matthias
A1  - Müller, Frank
A1  - Grandthyll, Samuel
A1  - Jacobs, Karin
A1  - Lilischkis, Rainer
A1  - Vu, Xuan T.
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
A1  - Thoelen, Roland
A1  - Weil, Maryam
A1  - Ingebrandt, Sven
T1  - Impedimetric immunosensor for the detection of histamine based on reduced graphene oxide
JF  - Physica status solidi (a)
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201431863
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1327
EP  - 1334
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Faßbender, Heinz
A1  - Mößle, Andrea
A1  - Vogler, Heiko
T1  - Implementation of a deterministic partial e-unification algorithm for macro tree transducers
JF  - Journal of functional and logic programming. 1996 (1996), H. 2
Y1  - 1996
SN  - 1080-5230
ER  - 
TY  - BOOK
A1  - Faßbender, Heinz
A1  - Vogler, Heiko
A1  - Wedel, Andrea
T1  - Implementation of a deterministic partial E-unification algorithm for macro tree transducers
Y1  - 1994
N1  - (Ulmer Informatik-Berichte ; 94,4)
PB  - Univ. Ulm, Fak. für Informatik
CY  - Ulm
ER  -