TY  - JOUR
A1  - Förster, Arnold
A1  - Zamdmer, N.
A1  - Hu, Qing
A1  - Verghese, S.
T1  - Mode-Discriminating Photoconductor and Coplanar Wave-Guide Circuits for Picosecond Sampling. Zamdmer, N.; Hu, Qing ; Verghese, S. ; Förster, A.
JF  - Applied Physics Letters. 74 (1999), H. 7
Y1  - 1999
SN  - 1077-3118
SP  - 1039
EP  - 1041
ER  - 
TY  - CHAP
A1  - Carzana, Livio
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Model and trajectory optimization for an ideal laser-enhanced solar sail
T2  - 68th International Astronautical Congress
N2  - A laser-enhanced solar sail is a solar sail that is not solely propelled by solar radiation but additionally by a laser beam that illuminates the sail. This way, the propulsive acceleration of the sail results from the combined action of the solar and the laser radiation pressure onto the sail. The potential source of the laser beam is a laser satellite that coverts solar power (in the inner solar system) or nuclear power (in the outer solar system) into laser power. Such a laser satellite (or many of them) can orbit anywhere in the solar system and its optimal orbit (or their optimal orbits) for a given mission is a subject for future research. This contribution provides the model for an ideal laser-enhanced solar sail and investigates how a laser can enhance the thrusting capability of such a sail. The term ”ideal” means that the solar sail is assumed to be perfectly reflecting and that the laser beam is assumed to have a constant areal power density over the whole sail area. Since a laser beam has a limited divergence, it can provide radiation pressure at much larger solar distances and increase the radiation pressure force into the desired direction. Therefore, laser-enhanced solar sails may make missions feasible, that would otherwise have prohibitively long flight times, e.g. rendezvous missions in the outer solar system. This contribution will also analyze exemplary mission scenarios and present optimial trajectories without laying too much emphasis on the design and operations of the laser satellites. If the mission studies conclude that laser-enhanced solar sails would have advantages with respect to ”traditional” solar sails, a detailed study of the laser satellites and the whole system architecture would be the second next step
Y1  - 2017
N1  - 68th International Astronautical Congress: Unlocking Imagination, Fostering Innovation and Strengthening Security, IAC 2017, 2017-09-25 → 2017-09-29, Adelaide, Australia
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Pichler, Alexander
A1  - George, Alfred
A1  - Seiler, Friedrich
T1  - Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007
T2  - PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620
Y1  - 2007
SP  - 1
EP  - 10
PB  - ISL
CY  - Saint Louis, France
ER  - 
TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Bauer, S. M.
A1  - Zamuraev, L. A.
T1  - Model of the transversely isotropic spherical layer for estimation of intraocular pressure changes after intravitreal injections / Bauer, S. M. ; Zamuraev, L. A. ; Kotliar, K. E.
JF  - Rossiiskii zhurnal biomekhaniki = Russian Journal of biomechanics. 10 (2006), H. 2
Y1  - 2006
SN  - 1812-5123
SP  - 41
EP  - 47
PB  - -
ER  - 
TY  - CHAP
A1  - Gao, H.
A1  - Babilon, Katharina
A1  - Pfaff, Raphael
A1  - Gan, F.
A1  - Reich, A.
T1  - Model of wheel-rail contact for sanding and adhesion enhancement
T2  - Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018
Y1  - 2018
SN  - 978-946186963-0
SP  - 314
EP  - 321
ER  - 
TY  - CHAP
A1  - Schwager, Christian
A1  - Angele, Florian
A1  - Schwarzbözl, Peter
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Model predictive assistance for operational decision making in molten salt receiver systems
T2  - SolarPACES: Solar Power & Chemical Energy Systems
N2  - Despite the challenges of pioneering molten salt towers (MST), it remains the leading technology in central receiver power plants today, thanks to cost effective storage integration and high cost reduction potential. The limited controllability in volatile solar conditions can cause significant losses, which are difficult to estimate without comprehensive modeling [1]. This paper presents a Methodology to generate predictions of the dynamic behavior of the receiver system as part of an operating assistance system (OAS). Based on this, it delivers proposals if and when to drain and refill the receiver during a cloudy period in order maximize the net yield and quantifies the amount of net electricity gained by this. After prior analysis with a detailed dynamic two-phase model of the entire receiver system, two different reduced modeling approaches where developed and implemented in the OAS. A tailored decision algorithm utilizes both models to deliver the desired predictions efficiently and with appropriate accuracy.
KW  - Power plants
KW  - Associated liquids
KW  - Decision theory
KW  - Electrochemistry
Y1  - 2023
SN  - 978-0-7354-4623-6
U6  - https://doi.org/10.1063/5.0151514
SN  - 1551-7616 (online)
SN  - 0094-243X (print)
N1  - SolarPACES: SOLAR POWER & CHEMICAL ENERGY SYSTEMS: 27th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27 September–1 October 2021, Online
IS  - 2815 / 1
PB  - AIP conference proceedings / American Institute of Physics
CY  - Melville, NY
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Tran, L.
A1  - Waluga, C.
A1  - Behr, M.
A1  - Oedekoven, B.
A1  - Mottaghy, K.
T1  - Model-based Numerical Analysis of Platelet Adhesion, Thrombus Growth and Aggregation for Assist Devices
JF  - The International Journal of Artificial Organs. 32 (2009), H. 7
Y1  - 2009
SN  - 0391-3988
N1  - Abstracts - Oral Presentations: XXXVI Annual ESAO Congress, 2-5 September 2009, Compiègne - France; European Society of Artificial Organs (ESAO), Compiegne, France, September 2-5, 2009
SP  - 398
EP  - 398
ER  - 
TY  - CHAP
A1  - Nikolovski, Gjorgji
A1  - Limpert, Nicolas
A1  - Nessau, Hendrik
A1  - Reke, Michael
A1  - Ferrein, Alexander
T1  - Model-predictive control with parallelised optimisation for the navigation of autonomous mining vehicles
T2  - 2023 IEEE Intelligent Vehicles Symposium (IV)
N2  - The work in modern open-pit and underground mines requires the transportation of large amounts of resources between fixed points. The navigation to these fixed points is a repetitive task that can be automated. The challenge in automating the navigation of vehicles commonly used in mines is the systemic properties of such vehicles. Many mining vehicles, such as the one we have used in the research for this paper, use steering systems with an articulated joint bending the vehicle’s drive axis to change its course and a hydraulic drive system to actuate axial drive components or the movements of tippers if available. To address the difficulties of controlling such a vehicle, we present a model-predictive approach for controlling the vehicle. While the control optimisation based on a parallel error minimisation of the predicted state has already been established in the past, we provide insight into the design and implementation of an MPC for an articulated mining vehicle and show the results of real-world experiments in an open-pit mine environment.
KW  - Mpc
KW  - Control
KW  - Path-following
KW  - Navigation
KW  - Automation
Y1  - 2023
SN  - 979-8-3503-4691-6 (Online)
SN  - 979-8-3503-4692-3 (Print)
U6  - https://doi.org/10.1109/IV55152.2023.10186806
N1  - IEEE Symposium on Intelligent Vehicle, 4.-7. June 2023, Anchorage, AK, USA.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Kohlberger, David-Sharif
A1  - Wild, Dominik
A1  - Kasper, Stefan
A1  - Czupalla, Markus
T1  - Modeling and analyses of a thermal passively stabilized LEO/GEO star tracker with embedded phase change material applying the Infused Thermal Solutions (ITS) method
T2  - ICES202: Satellite, Payload, and Instrument Thermal Control
N2  - Phase change materials offer a way of storing excess heat and releasing it when it is needed. They can be utilized as a method to control thermal behavior without the need for additional energy. This work focuses on exploring the potential of using phase change materials to passively control the thermal behavior of a star tracker by infusing it with a fitting phase change material. Based on the numerical model of the star trackers thermal behavior using ESATAN-TMS without implemented phase change material, a fitting phase change material for selected orbits is chosen and implemented in the thermal model. The altered thermal behavior of the numerical model after the implementation is analyzed for different amounts of the chosen phase change materials using an ESATAN-based subroutine developed by the FH Aachen. The PCM-modelling-subroutine is explained in the paper ICES-2021-110. The results show that an increasing amount of phase change material increasingly damps temperature oscillations. Using an integral part structure some of the mass increase can be compensated.
KW  - passive thermal control
KW  - PCM
KW  - star tracker
KW  - Infused Thermal Solutions
KW  - GEO
KW  - LEO
Y1  - 2021
N1  - 50th International Conference on Environmental Systems, 12-15 July 2021, held virtually
PB  - Texas Tech University
CY  - Lubbock, Tex.
ER  - 
TY  - JOUR
A1  - Schäfer, Horst
A1  - Heil, Günter
T1  - Modeling and Graphic Presentation of Acid–Base Titration Curves. Presentation of an Alternative Method
JF  - The Chemical Educator. 7 (2002), H. 6
Y1  - 2002
SN  - 1430-4171
SP  - 339
EP  - 346
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Nam, J.
A1  - Waluga, C.
A1  - Behr, M.
A1  - Pasquali, M.
A1  - Mottaghy, K.
T1  - Modeling and Numerical Analysis of Platelet Activation, Adhesion and Aggregation in Artificial Organs
Y1  - 2010
U6  - https://doi.org/10.1097/01.mat.0000369377.65122.a3
N1  - Posterpresentation American Society of Artificial Organs (ASAIO), Baltimore, USA, May 27-29, 2010
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Mai, A.
A1  - Bergmann, B.
A1  - Waluga, C.
A1  - Behr, M.
A1  - Tran, L.
A1  - Vonderstein, K.
A1  - Mottaghy, K.
T1  - Modeling and Numerical Simulation of Blood Damage
Y1  - 2010
N1  - Posterpresentation ; Umbrella Symposium "Modelling and Simulation in Medicine, Engineering and Sciences", Forschungszentrum Jülich, January 18-20, 2010
ER  - 
TY  - JOUR
A1  - Rieke, Christian
A1  - Stollenwerk, Dominik
A1  - Dahmen, Markus
A1  - Pieper, Martin
T1  - Modeling and optimization of a biogas plant for a demand-driven energy supply
JF  - Energy
N2  - Due to the Renewable Energy Act, in Germany it is planned to increase the amount of renewable energy carriers up to 60%. One of the main problems is the fluctuating supply of wind and solar energy. Here biogas plants provide a solution, because a demand-driven supply is possible. Before running such a plant, it is necessary to simulate and optimize the process. This paper provides a new model of a biogas plant, which is as accurate as the standard ADM1 model. The advantage compared to ADM1 is that it is based on only four parameters compared to 28. Applying this model, an optimization was installed, which allows a demand-driven supply by biogas plants. Finally the results are confirmed by several experiments and measurements with a real test plant.
Y1  - 2018
U6  - https://doi.org/10.1016/j.energy.2017.12.073
SN  - 0360-5442
VL  - 145
SP  - 657
EP  - 664
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, N. H.
A1  - Staat, Manfred
T1  - Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Jung, Alexander
A1  - Staat, Manfred
T1  - Modeling and simulation of human induced pluripotent stem cell-derived cardiac tissue
JF  - GAMM - Mitteilungen der Gesellschaft für Angewandte Mathematik und Mechanik
Y1  - 2019
U6  - https://doi.org/10.1002/gamm.201900002
SN  - 1522-2608
VL  - 42
IS  - 4
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - THES
A1  - Behbahani, Mehdi
T1  - Modeling and Simulation of Shear-Dependent Platelet Reactions in Blood Vessels and Blood-Contacting Medical Devices
Y1  - 2011
SN  - 978-3-8439-0134-5
PB  - Verlag Dr. Hut
CY  - München
ER  - 
TY  - CHAP
A1  - Rendon, Carlos
A1  - Schwager, Christian
A1  - Ghiasi, Mona
A1  - Schmitz, Pascal
A1  - Bohang, Fakhri
A1  - Chico Caminos, Ricardo Alexander
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Modeling and upscaling of a pilot bayonettube reactor for indirect solar mixed methane reforming
T2  - AIP Conference Proceedings
N2  - A 16.77 kW thermal power bayonet-tube reactor for the mixed reforming of methane using solar energy has been designed and modeled. A test bench for the experimental tests has been installed at the Synlight facility in Juelich, Germany and has just been commissioned. This paper presents the solar-heated reactor design for a combined steam and dry reforming as well as a scaled-up process simulation of a solar reforming plant for methanol production. Solar power towers are capable of providing large amounts of heat to drive high-endothermic reactions, and their integration with thermochemical processes shows a promising future. In the designed bayonet-tube reactor, the conventional burner arrangement for the combustion of natural gas has been substituted by a continuous 930 °C hot air stream, provided by means of a solar heated air receiver, a ceramic thermal storage and an auxiliary firing system. Inside the solar-heated reactor, the heat is transferred by means of convective mechanism mainly; instead of radiation mechanism as typically prevailing in fossil-based industrial reforming processes. A scaled-up solar reforming plant of 50.5 MWth was designed and simulated in Dymola® and AspenPlus®. In comparison to a fossil-based industrial reforming process of the same thermal capacity, a solar reforming plant with thermal storage promises a reduction up to 57 % of annual natural gas consumption in regions with annual DNI-value of 2349 kWh/m2. The benchmark solar reforming plant contributes to a CO2 avoidance of approx. 79 kilotons per year. This facility can produce a nominal output of 734.4 t of synthesis gas and out of this 530 t of methanol a day.
Y1  - 2020
U6  - https://doi.org/10.1063/5.0029974
N1  - SOLARPACES 2019: International Conference on Concentrating Solar Power and Chemical Energy Systems, 1–4 October 2019, Daegu, South Korea
IS  - 2303
SP  - 170012-1
EP  - 170012-9
ER  - 
TY  - JOUR
A1  - Vogt, Christian
A1  - Iwanowski-Strahser, Katha
A1  - Marquart, Gabriele
A1  - Arnold, Juliane
A1  - Mottaghy, Darius
A1  - Pechnig, Renate
A1  - Gnjezda, Daniel
A1  - Clauser, Christoph
T1  - Modeling contribution to risk assessment of thermal production power for geothermal reservoirs
JF  - Renewable Energy
Y1  - 2013
U6  - https://doi.org/10.1016/j.renene.2012.11.026
SN  - 0960-1481
VL  - 53
SP  - 230
EP  - 241
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Scheer, Nico
A1  - Kapelyukh, Yury
A1  - McEwan, Jillian
A1  - Beuger, Vincent
A1  - Stanley, Lesley A.
A1  - Rode, Anja
A1  - Wolf, C. Roland
T1  - Modeling Human Cytochrome P450 2D6 Metabolism and Drug-drug Interaction by a Novel Panel of Knockout and Humanized Mouse Lines
JF  - Molecular Pharmacology
N2  - The highly polymorphic human cytochrome P450 2D6 enzyme is involved in the metabolism of up to 25% of all marketed drugs and accounts for significant individual differences in response to CYP2D6 substrates. Because of the differences in the multiplicity and substrate specificity of CYP2D family members among species, it is difficult to predict pathways of human CYP2D6-dependent drug metabolism on the basis of animal studies. To create animal models that reflect the human situation more closely and that allow an in vivo assessment of the consequences of differential CYP2D6 drug metabolism, we have developed a novel straightforward approach to delete the entire murine Cyp2d gene cluster and replace it with allelic variants of human CYP2D6. By using this approach, we have generated mouse lines expressing the two frequent human protein isoforms CYP2D6.1 and CYP2D6.2 and an as yet undescribed variant of this enzyme, as well as a Cyp2d cluster knockout mouse. We demonstrate that the various transgenic mouse lines cover a wide spectrum of different human CYP2D6 metabolizer phenotypes. The novel humanization strategy described here provides a robust approach for the expression of different CYP2D6 allelic variants in transgenic mice and thus can help to evaluate potential CYP2D6-dependent interindividual differences in drug response in the context of personalized medicine.
Y1  - 2012
U6  - https://doi.org/10.1124/mol.111.075192
SN  - 1521-0111
VL  - 81
IS  - 1
SP  - 63
EP  - 72
PB  - ASPET
CY  - Bethesda, Md.
ER  - 
TY  - JOUR
A1  - Pietsch, Wolfram
A1  - Kurbel, Karl
A1  - Jung, R.
T1  - Modeling Knowledge about Long-term IS-Integration and Integration-oriented Reengineering with KADS / Kurbel, K., Jung, R., Pietsch, W.
JF  - Distributed information systems in business / W. König ... (eds.)
Y1  - 1996
SN  - 3-540-61094-4
PB  - Springer
CY  - Berlin [u.a.]
ER  -