TY  - CHAP
A1  - Luft, Angela
A1  - Gebhardt, Andreas
A1  - Balc, Nicolae
T1  - Challenges of additive manufacturing in production systems
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - https://doi.org/10.1051/matecconf/201929901003
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01003
ER  - 
TY  - CHAP
A1  - Schiffer, Fabian
A1  - Bragard, Michael
T1  - Cascaded LQ and Field-Oriented Control of a Mobile Inverse Pendulum (Segway) with Permanent Magnet Synchronous Machines
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - https://doi.org/10.1109/REM.2019.8744101
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Jan Thimo, Grundmann
A1  - Bauer, Waldemar
A1  - Biele, Jens
A1  - Boden, Ralf
A1  - Ceriotti, Matteo
A1  - Cordero, Federico
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Hercik, David
T1  - Capabilities of Gossamer-1 derived small spacecraft solar sails carrying Mascot-derived nanolanders for in-situ surveying of NEAs
JF  - Acta Astronautica
Y1  - 2019
U6  - https://doi.org/10.1016/j.actaastro.2018.03.019
SN  - 0094-5765
VL  - 156
IS  - 3
SP  - 330
EP  - 362
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Claer, Mario
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - Calibration of a Rotating or Revolving Platform with a LiDAR Sensor
JF  - Applied Sciences
Y1  - 2019
U6  - https://doi.org/10.3390/app9112238
SN  - 2076-3417
VL  - Volume 9
IS  - issue 11, 2238
PB  - MDPI
CY  - Basel
ER  - 
TY  - BOOK
A1  - Wagemann, Kurt
A1  - Tippkötter, Nils
T1  - Biorefineries / Kurt Wagemann, Nils Tippkötter (editors)
T3  - Advances in biochemical engineering/biotechnology book series (ABE)
Y1  - 2019
SN  - 978-3-319-97117-9
SN  - 978-3-319-97119-3
U6  - https://doi.org/10.1007/978-3-319-97119-3
PB  - Springer
CY  - Cham (Switzerland)
ER  - 
TY  - CHAP
A1  - Eggert, Mathias
T1  - Big Data Research - How to Structure the Changes of the Past Decade?
T2  - The Art of Structuring
N2  - In the past decade, many IS researchers focused on researching the phenomenon of Big Data. At the same time, the relevance of data protection gets more attention than ever before. In particular, since the enactment of the European General Data Protection Regulation in May 2018 Information Systems research should provide answers for protecting personal data. The article at hand presents a structuring framework for Big Data research outcome and the consideration of data protection. IS Researchers might use the framework in order to structure Big Data literature and to identify research gaps that should be addressed in the future.
Y1  - 2019
SN  - 978-3-030-06234-7
U6  - https://doi.org/10.1007/978-3-030-06234-7_26
SP  - 271
EP  - 281
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Abbas, Karim
A1  - Thurn, Laura
A1  - Kessler, Julia
A1  - Eichler, Fabian
T1  - Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - https://doi.org/10.1051/matecconf/201929901009
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01009
ER  - 
TY  - THES
A1  - Engelmann, Ulrich M.
T1  - Assessing magnetic fluid hyperthermia : magnetic relaxation simulation, modeling of nanoparticle uptake inside pancreatic tumor cells and in vitro efficacy
Y1  - 2019
SN  - 978-3-945954-58-4
N1  - Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2019
PB  - Infinite Science Publishing
CY  - Lübeck
ER  - 
TY  - JOUR
A1  - Stulpe, Werner
T1  - Aspects of the Quantum-Classical Connection Based on Statistical Maps
JF  - Foundations of Physics
Y1  - 2019
U6  - https://doi.org/10.1007/s10701-019-00269-9
VL  - 49
IS  - 6
SP  - 677
EP  - 692
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
A1  - Uto, Takahiro
A1  - Uchiyama, Yuta
A1  - Wirsum, Manfred
A1  - Funke, Harald
A1  - Kusterer, Karsten
T1  - Application of Low NOx Micro-mix Hydrogen Combustion to 2MW Class Industrial Gas Turbine Combustor
T2  - Proceedings of International Gas Turbine Congress 2019 Tokyo, November 17-22, 2019, Tokyo, Japan
Y1  - 2019
SN  - 978-4-89111-010-9
N1  - IGTC-2019-129
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Savitskaya, I.S.
A1  - Kistaubayeva, A.S.
A1  - Ignatova, L.V.
A1  - Digel, Ilya
T1  - Antimicrobial and wound healing properties of a bacterial cellulose based material containing B. subtilis cells
JF  - Heliyon
Y1  - 2019
U6  - https://doi.org/10.1016/j.heliyon.2019.e02592
SN  - 2405-8440
VL  - 5
IS  - 10
SP  - Artikelnummer e02592
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Analysis of volumetric solar radiation absorbers made of wire meshes
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - https://doi.org/10.1063/1.5117521
SN  - 0094243X
VL  - 2126
SP  - 030009-1
EP  - 030009-6
ER  - 
TY  - CHAP
A1  - Cordes, Sven
A1  - Gligorevic, Snjezana
A1  - Blicharski, Peter
T1  - Analysis of sine precision influence on DOA estimation using the MUSIC algorithm
T2  - 2019 20th International Radar Symposium (IRS)
Y1  - 2019
SN  - 978-3-7369-9860-5
U6  - https://doi.org/10.23919/IRS.2019.8768162
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - An overview on dry low NOx micromix combustor development for hydrogen-rich gas turbine applications
JF  - International Journal of Hydrogen Energy
Y1  - 2019
U6  - https://doi.org/10.1016/j.ijhydene.2019.01.161
SN  - 0360-3199
VL  - 44
IS  - 13
SP  - 6978
EP  - 6990
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Optimized Method for 3D Body Scanning Applications Based on KinectFusion
T2  - Communications in Computer and Information Science
Y1  - 2019
U6  - https://doi.org/10.1007/978-3-030-29196-9_6
SN  - 1865-0929
N1  - 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; Funchal; Portugal; 19 January 2018 through 21 January 2018
VL  - 1024
SP  - 100
EP  - 113
PB  - Springer
ER  - 
TY  - JOUR
A1  - Scheer, Nico
A1  - Henderson, Colin James
A1  - Kapelyukh, Yury
A1  - Rode, Anja
A1  - Mclaren, Aileen W.
A1  - MacLeod, Alastair Kenneth
A1  - Lin, De
A1  - Wright, Jayne
A1  - Stanley, Lesley
A1  - Wolf, C. Roland
T1  - An extensively humanised mouse model to predict pathways of drug disposition, drug/drug interactions, and to facilitate the design of clinical trials
JF  - Drug Metabolism and Disposition
Y1  - 2019
U6  - https://doi.org/10.1124/dmd.119.086397
IS  - Early view
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Englhard, Markus
A1  - Arent, Jan-Christoph
A1  - Hausmann, Joachim
T1  - An experimental characterization of wrinkling generated during prepreg autoclave manufacturing using caul plates
JF  - Journal of Composite Materials
Y1  - 2019
U6  - https://doi.org/10.1177/0021998319846556
SN  - 1530-793X
VL  - 53
IS  - 26-27
SP  - 3757
EP  - 3773
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Efficient Hashing Algorithm for NN Problem in HD Spaces
T2  - Lecture Notes in Computer Science
Y1  - 2019
SN  - 978-303005498-4
U6  - https://doi.org/10.1007/978-3-030-05499-1_6
N1  - 7th International Conference on Pattern Recognition Applications and Methods, ICPRAM 2018; Funchal; Portugal; 16 January 2018 through 18 January 2018; Code 222779
SP  - 101
EP  - 115
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Khalsa, R.
A1  - Kreyer, Jörg
A1  - Mayntz, Joscha
A1  - Braun, Carsten
A1  - Dahmann, Peter
A1  - Esch, Thomas
A1  - Kemper, Hans
A1  - Schmitz, O.
A1  - Bragard, Michael
T1  - An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt
N2  - In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Rao, Deepak
A1  - Pathrose, Plato
A1  - Hüning, Felix
A1  - Sid, Jithin
T1  - An Approach for Validating Safety of Perception Software in Autonomous Driving Systems
T2  - Model-Based Safety and Assessment: 6th International Symposium, IMBSA 2019, Thessaloniki, Greece, October 16–18, 2019, Proceedings
N2  - The increasing complexity of Advanced Driver Assistance Systems (ADAS) presents a challenging task to validate safe and reliable performance of these systems under varied conditions. The test and validation of ADAS/AD with real test drives, although important, involves huge costs and time. Simulation tools provide an alternative with the added advantage of reproducibility but often use ideal sensors, which do not reflect real sensor output accurately. This paper presents a new validation methodology using fault injection, as recommended by the ISO 26262 standard, to test software and system robustness. In our work, we investigated and developed a tool capable of inserting faults at different software and system levels to verify its robustness. The scope of this paper is to cover the fault injection test for the Visteon’s DriveCore™ system, a centralized domain controller for Autonomous driving which is sensor agnostic and SoC agnostic. With this new approach, the validation of safety monitoring functionality and its behavior can be tested using real-world data instead of synthetic data from simulation tools resulting in having better confidence in system performance before proceeding with in-vehicle testing.
KW  - Advanced driver assistance systems (ADAS/AD)
KW  - ISO 26262
KW  - Safety-critical systems validation
KW  - Safety of the intended functionality (SOTIF)
Y1  - 2019
SN  - 978-3-030-32872-6
U6  - https://doi.org/10.1007/978-3-030-32872-6_20
SP  - 303
EP  - 316
PB  - Springer
CY  - Cham
ER  -